Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Frag and UDP handling fixes in i40e driver, from Amritha Nambiar and
    Alexander Duyck.

 2) Undo unintentional UAPI change in netfilter conntrack, from Florian
    Westphal.

 3) Revert a change to how error codes are returned from
    dev_get_valid_name(), it broke some apps.

 4) Cannot cache routes for ipv6 tunnels in the tunnel is ipv4/ipv6
    dual-stack. From Eli Cooper.

 5) Fix missed PMTU updates in geneve, from Xin Long.

 6) Cure double free in macvlan, from Gao Feng.

 7) Fix heap out-of-bounds write in rds_message_alloc_sgs(), from
    Mohamed Ghannam.

 8) FEC bug fixes from FUgang Duan (mis-accounting of dev_id, missed
    deferral of probe when the regulator is not ready yet).

 9) Missing DMA mapping error checks in 3c59x, from Neil Horman.

10) Turn off Broadcom tags for some b53 switches, from Florian Fainelli.

11) Fix OOPS when get_target_net() is passed an SKB whose NETLINK_CB()
    isn't initialized. From Andrei Vagin.

12) Fix crashes in fib6_add(), from Wei Wang.

13) PMTU bug fixes in SCTP from Marcelo Ricardo Leitner.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
  sh_eth: fix TXALCR1 offsets
  mdio-sun4i: Fix a memory leak
  phylink: mark expected switch fall-throughs in phylink_mii_ioctl
  sctp: fix the handling of ICMP Frag Needed for too small MTUs
  sctp: do not retransmit upon FragNeeded if PMTU discovery is disabled
  xen-netfront: enable device after manual module load
  bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine.
  bnxt_en: Fix population of flow_type in bnxt_hwrm_cfa_flow_alloc()
  sh_eth: fix SH7757 GEther initialization
  net: fec: free/restore resource in related probe error pathes
  uapi/if_ether.h: prevent redefinition of struct ethhdr
  ipv6: fix general protection fault in fib6_add()
  RDS: null pointer dereference in rds_atomic_free_op
  sh_eth: fix TSU resource handling
  net: stmmac: enable EEE in MII, GMII or RGMII only
  rtnetlink: give a user socket to get_target_net()
  MAINTAINERS: Update my email address.
  can: ems_usb: improve error reporting for error warning and error passive
  can: flex_can: Correct the checking for frame length in flexcan_start_xmit()
  can: gs_usb: fix return value of the "set_bittiming" callback
  ...

1 files changed, 26 insertions, 11 deletions

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 321d8be80871..42dcaefc4c19 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1573,11 +1573,18 @@ static int i40e_set_mac(struct net_device *netdev, void *p)
 	else
 		netdev_info(netdev, "set new mac address %pM\n", addr->sa_data);
 
+	/* Copy the address first, so that we avoid a possible race with
+	 * .set_rx_mode(). If we copy after changing the address in the filter
+	 * list, we might open ourselves to a narrow race window where
+	 * .set_rx_mode could delete our dev_addr filter and prevent traffic
+	 * from passing.
+	 */
+	ether_addr_copy(netdev->dev_addr, addr->sa_data);
+
 	spin_lock_bh(&vsi->mac_filter_hash_lock);
 	i40e_del_mac_filter(vsi, netdev->dev_addr);
 	i40e_add_mac_filter(vsi, addr->sa_data);
 	spin_unlock_bh(&vsi->mac_filter_hash_lock);
-	ether_addr_copy(netdev->dev_addr, addr->sa_data);
 	if (vsi->type == I40E_VSI_MAIN) {
 		i40e_status ret;
 
@@ -1923,6 +1930,14 @@ static int i40e_addr_unsync(struct net_device *netdev, const u8 *addr)
 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 	struct i40e_vsi *vsi = np->vsi;
 
+	/* Under some circumstances, we might receive a request to delete
+	 * our own device address from our uc list. Because we store the
+	 * device address in the VSI's MAC/VLAN filter list, we need to ignore
+	 * such requests and not delete our device address from this list.
+	 */
+	if (ether_addr_equal(addr, netdev->dev_addr))
+		return 0;
+
 	i40e_del_mac_filter(vsi, addr);
 
 	return 0;
@@ -6038,8 +6053,8 @@ static int i40e_validate_and_set_switch_mode(struct i40e_vsi *vsi)
 	/* Set Bit 7 to be valid */
 	mode = I40E_AQ_SET_SWITCH_BIT7_VALID;
 
-	/* Set L4type to both TCP and UDP support */
-	mode |= I40E_AQ_SET_SWITCH_L4_TYPE_BOTH;
+	/* Set L4type for TCP support */
+	mode |= I40E_AQ_SET_SWITCH_L4_TYPE_TCP;
 
 	/* Set cloud filter mode */
 	mode |= I40E_AQ_SET_SWITCH_MODE_NON_TUNNEL;
@@ -6969,18 +6984,18 @@ static int i40e_add_del_cloud_filter_big_buf(struct i40e_vsi *vsi,
 	     is_valid_ether_addr(filter->src_mac)) ||
 	    (is_multicast_ether_addr(filter->dst_mac) &&
 	     is_multicast_ether_addr(filter->src_mac)))
-		return -EINVAL;
+		return -EOPNOTSUPP;
 
-	/* Make sure port is specified, otherwise bail out, for channel
-	 * specific cloud filter needs 'L4 port' to be non-zero
+	/* Big buffer cloud filter needs 'L4 port' to be non-zero. Also, UDP
+	 * ports are not supported via big buffer now.
 	 */
-	if (!filter->dst_port)
-		return -EINVAL;
+	if (!filter->dst_port || filter->ip_proto == IPPROTO_UDP)
+		return -EOPNOTSUPP;
 
 	/* adding filter using src_port/src_ip is not supported at this stage */
 	if (filter->src_port || filter->src_ipv4 ||
 	    !ipv6_addr_any(&filter->ip.v6.src_ip6))
-		return -EINVAL;
+		return -EOPNOTSUPP;
 
 	/* copy element needed to add cloud filter from filter */
 	i40e_set_cld_element(filter, &cld_filter.element);
@@ -6991,7 +7006,7 @@ static int i40e_add_del_cloud_filter_big_buf(struct i40e_vsi *vsi,
 	    is_multicast_ether_addr(filter->src_mac)) {
 		/* MAC + IP : unsupported mode */
 		if (filter->dst_ipv4)
-			return -EINVAL;
+			return -EOPNOTSUPP;
 
 		/* since we validated that L4 port must be valid before
 		 * we get here, start with respective "flags" value
@@ -7356,7 +7371,7 @@ static int i40e_configure_clsflower(struct i40e_vsi *vsi,
 
 	if (tc < 0) {
 		dev_err(&vsi->back->pdev->dev, "Invalid traffic class\n");
-		return -EINVAL;
+		return -EOPNOTSUPP;
 	}
 
 	if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) ||