Merge tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support for host software queue for (e)MMC/SD
   - Throttle polling rate for CMD6
   - Update CMD13 busy condition check for CMD6 commands
   - Improve busy detect polling for erase/trim/discard/HPI
   - Fixup support for HW busy detection for HPI commands
   - Re-work and improve support for eMMC sanitize commands

  MMC host:
   - mmci:
       * Add support for sdmmc variant revision 2.0
   - mmci_sdmmc:
       * Improve support for busyend detection
       * Fixup support for signal voltage switch
       * Add support for tuning with delay block
   - mtk-sd:
       * Fix another SDIO irq issue
   - sdhci:
       * Disable native card detect when GPIO based type exist
   - sdhci:
       * Add option to defer request completion
   - sdhci_am654:
       * Add support to set a tap value per speed mode
   - sdhci-esdhc-imx:
       * Add support for i.MX8MM based variant
       * Fixup support for standard tuning on i.MX8 usdhc
       * Optimize for strobe/clock dll settings
       * Fixup support for system and runtime suspend/resume
   - sdhci-iproc:
       * Update regulator/bus-voltage management for bcm2711
   - sdhci-msm:
       * Prevent clock gating with PWRSAVE_DLL on broken variants
       * Fix management of CQE during SDHCI reset
   - sdhci-of-arasan:
       * Add support for auto tuning on ZynqMP based platforms
   - sdhci-omap:
       * Add support for system suspend/resume
   - sdhci-sprd:
       * Add support for HW busy detection
       * Enable support host software queue
   - sdhci-tegra:
       * Add support for HW busy detection
   - tmio/renesas_sdhi:
       * Enforce retune after runtime suspend
   - renesas_sdhi:
       * Use manual tap correction for HS400 on some variants
       * Add support for manual correction of tap values for tunings"

* tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
  mmc: cavium-octeon: remove nonsense variable coercion
  mmc: mediatek: fix SDIO irq issue
  mmc: mmci_sdmmc: Fix clear busyd0end irq flag
  dt-bindings: mmc: Fix node name in an example
  mmc: core: Re-work the code for eMMC sanitize
  mmc: sdhci: use FIELD_GET for preset value bit masks
  mmc: sdhci-of-at91: Display clock changes for debug purpose only
  mmc: sdhci: iproc: Add custom set_power() callback for bcm2711
  mmc: sdhci: am654: Use sdhci_set_power_and_voltage()
  mmc: sdhci: at91: Use sdhci_set_power_and_voltage()
  mmc: sdhci: milbeaut: Use sdhci_set_power_and_voltage()
  mmc: sdhci: arasan: Use sdhci_set_power_and_voltage()
  mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage()
  mmc: vub300: Use scnprintf() for avoiding potential buffer overflow
  dt-bindings: mmc: synopsys-dw-mshc: fix clock-freq-min-max in example
  sdhci: tegra: Enable MMC_CAP_WAIT_WHILE_BUSY host capability
  sdhci: tegra: Implement Tegra specific set_timeout callback
  mmc: sdhci-omap: Add Support for Suspend/Resume
  mmc: renesas_sdhi: simplify execute_tuning
  mmc: renesas_sdhi: Use BITS_PER_LONG helper
  ...

1 files changed, 30 insertions, 26 deletions

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index de14b5845f52..de94fbe629bd 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1055,7 +1055,7 @@ static int mmc_select_hs(struct mmc_card *card)
 	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 			   EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS,
 			   card->ext_csd.generic_cmd6_time, MMC_TIMING_MMC_HS,
-			   true, true, true);
+			   true, true);
 	if (err)
 		pr_warn("%s: switch to high-speed failed, err:%d\n",
 			mmc_hostname(card->host), err);
@@ -1087,7 +1087,7 @@ static int mmc_select_hs_ddr(struct mmc_card *card)
 			   ext_csd_bits,
 			   card->ext_csd.generic_cmd6_time,
 			   MMC_TIMING_MMC_DDR52,
-			   true, true, true);
+			   true, true);
 	if (err) {
 		pr_err("%s: switch to bus width %d ddr failed\n",
 			mmc_hostname(host), 1 << bus_width);
@@ -1155,7 +1155,7 @@ static int mmc_select_hs400(struct mmc_card *card)
 	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 			   EXT_CSD_HS_TIMING, val,
 			   card->ext_csd.generic_cmd6_time, 0,
-			   true, false, true);
+			   false, true);
 	if (err) {
 		pr_err("%s: switch to high-speed from hs200 failed, err:%d\n",
 			mmc_hostname(host), err);
@@ -1173,7 +1173,7 @@ static int mmc_select_hs400(struct mmc_card *card)
 	max_dtr = card->ext_csd.hs_max_dtr;
 	mmc_set_clock(host, max_dtr);
 
-	err = mmc_switch_status(card);
+	err = mmc_switch_status(card, true);
 	if (err)
 		goto out_err;
 
@@ -1197,7 +1197,7 @@ static int mmc_select_hs400(struct mmc_card *card)
 	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 			   EXT_CSD_HS_TIMING, val,
 			   card->ext_csd.generic_cmd6_time, 0,
-			   true, false, true);
+			   false, true);
 	if (err) {
 		pr_err("%s: switch to hs400 failed, err:%d\n",
 			 mmc_hostname(host), err);
@@ -1211,7 +1211,7 @@ static int mmc_select_hs400(struct mmc_card *card)
 	if (host->ops->hs400_complete)
 		host->ops->hs400_complete(host);
 
-	err = mmc_switch_status(card);
+	err = mmc_switch_status(card, true);
 	if (err)
 		goto out_err;
 
@@ -1243,20 +1243,20 @@ int mmc_hs400_to_hs200(struct mmc_card *card)
 	val = EXT_CSD_TIMING_HS;
 	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING,
 			   val, card->ext_csd.generic_cmd6_time, 0,
-			   true, false, true);
+			   false, true);
 	if (err)
 		goto out_err;
 
 	mmc_set_timing(host, MMC_TIMING_MMC_DDR52);
 
-	err = mmc_switch_status(card);
+	err = mmc_switch_status(card, true);
 	if (err)
 		goto out_err;
 
 	/* Switch HS DDR to HS */
 	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH,
 			   EXT_CSD_BUS_WIDTH_8, card->ext_csd.generic_cmd6_time,
-			   0, true, false, true);
+			   0, false, true);
 	if (err)
 		goto out_err;
 
@@ -1265,7 +1265,7 @@ int mmc_hs400_to_hs200(struct mmc_card *card)
 	if (host->ops->hs400_downgrade)
 		host->ops->hs400_downgrade(host);
 
-	err = mmc_switch_status(card);
+	err = mmc_switch_status(card, true);
 	if (err)
 		goto out_err;
 
@@ -1274,7 +1274,7 @@ int mmc_hs400_to_hs200(struct mmc_card *card)
 	      card->drive_strength << EXT_CSD_DRV_STR_SHIFT;
 	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING,
 			   val, card->ext_csd.generic_cmd6_time, 0,
-			   true, false, true);
+			   false, true);
 	if (err)
 		goto out_err;
 
@@ -1285,7 +1285,7 @@ int mmc_hs400_to_hs200(struct mmc_card *card)
 	 * failed. If there really is a problem, we would expect tuning will
 	 * fail and the result ends up the same.
 	 */
-	err = __mmc_switch_status(card, false);
+	err = mmc_switch_status(card, false);
 	if (err)
 		goto out_err;
 
@@ -1358,7 +1358,7 @@ static int mmc_select_hs400es(struct mmc_card *card)
 	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 			   EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS,
 			   card->ext_csd.generic_cmd6_time, 0,
-			   true, false, true);
+			   false, true);
 	if (err) {
 		pr_err("%s: switch to hs for hs400es failed, err:%d\n",
 			mmc_hostname(host), err);
@@ -1366,7 +1366,7 @@ static int mmc_select_hs400es(struct mmc_card *card)
 	}
 
 	mmc_set_timing(host, MMC_TIMING_MMC_HS);
-	err = mmc_switch_status(card);
+	err = mmc_switch_status(card, true);
 	if (err)
 		goto out_err;
 
@@ -1392,7 +1392,7 @@ static int mmc_select_hs400es(struct mmc_card *card)
 	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 			   EXT_CSD_HS_TIMING, val,
 			   card->ext_csd.generic_cmd6_time, 0,
-			   true, false, true);
+			   false, true);
 	if (err) {
 		pr_err("%s: switch to hs400es failed, err:%d\n",
 			mmc_hostname(host), err);
@@ -1407,7 +1407,7 @@ static int mmc_select_hs400es(struct mmc_card *card)
 	if (host->ops->hs400_enhanced_strobe)
 		host->ops->hs400_enhanced_strobe(host, &host->ios);
 
-	err = mmc_switch_status(card);
+	err = mmc_switch_status(card, true);
 	if (err)
 		goto out_err;
 
@@ -1457,7 +1457,7 @@ static int mmc_select_hs200(struct mmc_card *card)
 		err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 				   EXT_CSD_HS_TIMING, val,
 				   card->ext_csd.generic_cmd6_time, 0,
-				   true, false, true);
+				   false, true);
 		if (err)
 			goto err;
 		old_timing = host->ios.timing;
@@ -1468,7 +1468,7 @@ static int mmc_select_hs200(struct mmc_card *card)
 		 * switch failed. If there really is a problem, we would expect
 		 * tuning will fail and the result ends up the same.
 		 */
-		err = __mmc_switch_status(card, false);
+		err = mmc_switch_status(card, false);
 
 		/*
 		 * mmc_select_timing() assumes timing has not changed if
@@ -1851,15 +1851,19 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	 */
 	card->reenable_cmdq = card->ext_csd.cmdq_en;
 
-	if (card->ext_csd.cmdq_en && !host->cqe_enabled) {
+	if (host->cqe_ops && !host->cqe_enabled) {
 		err = host->cqe_ops->cqe_enable(host, card);
-		if (err) {
-			pr_err("%s: Failed to enable CQE, error %d\n",
-				mmc_hostname(host), err);
-		} else {
+		if (!err) {
 			host->cqe_enabled = true;
-			pr_info("%s: Command Queue Engine enabled\n",
-				mmc_hostname(host));
+
+			if (card->ext_csd.cmdq_en) {
+				pr_info("%s: Command Queue Engine enabled\n",
+					mmc_hostname(host));
+			} else {
+				host->hsq_enabled = true;
+				pr_info("%s: Host Software Queue enabled\n",
+					mmc_hostname(host));
+			}
 		}
 	}
 
@@ -1958,7 +1962,7 @@ static int mmc_poweroff_notify(struct mmc_card *card, unsigned int notify_type)
 
 	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 			EXT_CSD_POWER_OFF_NOTIFICATION,
-			notify_type, timeout, 0, true, false, false);
+			notify_type, timeout, 0, false, false);
 	if (err)
 		pr_err("%s: Power Off Notification timed out, %u\n",
 		       mmc_hostname(card->host), timeout);