Merge tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:
 "The big change in this round is that we're finally in a position where
  we can sanely remove the old drivers/ide/ code, as libata covers
  everything we need by now.

  This is exciting for two reasons:

   1) we delete a lot of legacy code that doesn't really meet the
      standards we have today, and

   2) it enables us to clean up various bits in the block layer that
      exist only because of the old IDE code.

  Outside of that, just a few minor fixes here, fixups for warnings,
  etc"

* tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block: (29 commits)
  ata: rb532_cf: remove redundant codes
  ide: remove the legacy ide driver
  m68k: use libata instead of the legacy ide driver
  ARM: disable CONFIG_IDE in pxa_defconfig
  ARM: disable CONFIG_IDE in footbridge_defconfig
  alpha: use libata instead of the legacy ide driver
  pata_cypress: add a module option to disable BM-DMA
  ata: pata_macio: Avoid overwriting initialised field in 'pata_macio_sht'
  ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht
  ata: pata_sc1200: sc1200_sht'Avoid overwriting initialised field in '
  ata: pata_cs5530: Avoid overwriting initialised field in 'cs5530_sht'
  ata: pata_cs5520: Avoid overwriting initialised field in 'cs5520_sht'
  ata: pata_atiixp: Avoid overwriting initialised field in 'atiixp_sht'
  ata: sata_nv: Do not over-write initialise fields in 'nv_adma_sht' and 'nv_swncq_sht'
  ata: sata_mv: Do not over-write initialise fields in 'mv6_sht'
  ata: sata_sil24: Do not over-write initialise fields in 'sil24_sht'
  ata: ahci: Ensure initialised fields are not overwritten in AHCI_SHT()
  ata: include: libata: Move fields commonly over-written to separate MACRO
  ahci: Add support for Dell S140 and later controllers
  ata: ahci_sunxi: Disable DIPM
  ...

1 files changed, 0 insertions, 165 deletions

diff --git a/drivers/ide/it8172.c b/drivers/ide/it8172.c
deleted file mode 100644
index b6f674ab4fb7..000000000000
--- a/drivers/ide/it8172.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *      IT8172 IDE controller support
- *
- * Copyright (C) 2000 MontaVista Software Inc.
- * Copyright (C) 2008 Shane McDonald
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "IT8172"
-
-static void it8172_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	u16 drive_enables;
-	u32 drive_timing;
-	const u8 pio = drive->pio_mode - XFER_PIO_0;
-
-	/*
-	 * The highest value of DIOR/DIOW pulse width and recovery time
-	 * that can be set in the IT8172 is 8 PCI clock cycles.  As a result,
-	 * it cannot be configured for PIO mode 0.  This table sets these
-	 * parameters to the maximum supported by the IT8172.
-	 */
-	static const u8 timings[] = { 0x3f, 0x3c, 0x1b, 0x12, 0x0a };
-
-	pci_read_config_word(dev, 0x40, &drive_enables);
-	pci_read_config_dword(dev, 0x44, &drive_timing);
-
-	/*
-	 * Enable port 0x44. The IT8172 spec is confused; it calls
-	 * this register the "Slave IDE Timing Register", but in fact,
-	 * it controls timing for both master and slave drives.
-	 */
-	drive_enables |= 0x4000;
-
-	drive_enables &= drive->dn ? 0xc006 : 0xc060;
-	if (drive->media == ide_disk)
-		/* enable prefetch */
-		drive_enables |= 0x0004 << (drive->dn * 4);
-	if (ide_pio_need_iordy(drive, pio))
-		/* enable IORDY sample-point */
-		drive_enables |= 0x0002 << (drive->dn * 4);
-
-	drive_timing &= drive->dn ? 0x00003f00 : 0x000fc000;
-	drive_timing |= timings[pio] << (drive->dn * 6 + 8);
-
-	pci_write_config_word(dev, 0x40, drive_enables);
-	pci_write_config_dword(dev, 0x44, drive_timing);
-}
-
-static void it8172_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	int a_speed		= 3 << (drive->dn * 4);
-	int u_flag		= 1 << drive->dn;
-	int u_speed		= 0;
-	u8 reg48, reg4a;
-	const u8 speed		= drive->dma_mode;
-
-	pci_read_config_byte(dev, 0x48, &reg48);
-	pci_read_config_byte(dev, 0x4a, &reg4a);
-
-	if (speed >= XFER_UDMA_0) {
-		u8 udma = speed - XFER_UDMA_0;
-		u_speed = udma << (drive->dn * 4);
-
-		pci_write_config_byte(dev, 0x48, reg48 | u_flag);
-		reg4a &= ~a_speed;
-		pci_write_config_byte(dev, 0x4a, reg4a | u_speed);
-	} else {
-		const u8 mwdma_to_pio[] = { 0, 3, 4 };
-
-		pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
-		pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed);
-
-		drive->pio_mode =
-			mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0;
-
-		it8172_set_pio_mode(hwif, drive);
-	}
-}
-
-
-static const struct ide_port_ops it8172_port_ops = {
-	.set_pio_mode	= it8172_set_pio_mode,
-	.set_dma_mode	= it8172_set_dma_mode,
-};
-
-static const struct ide_port_info it8172_port_info = {
-	.name		= DRV_NAME,
-	.port_ops	= &it8172_port_ops,
-	.enablebits	= { {0x41, 0x80, 0x80}, {0x00, 0x00, 0x00} },
-	.host_flags	= IDE_HFLAG_SINGLE,
-	.pio_mask	= ATA_PIO4 & ~ATA_PIO0,
-	.mwdma_mask	= ATA_MWDMA2,
-	.udma_mask	= ATA_UDMA2,
-};
-
-static int it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
-		return -ENODEV; /* IT8172 is more than an IDE controller */
-	return ide_pci_init_one(dev, &it8172_port_info, NULL);
-}
-
-static struct pci_device_id it8172_pci_tbl[] = {
-	{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8172), 0 },
-	{ 0, },
-};
-MODULE_DEVICE_TABLE(pci, it8172_pci_tbl);
-
-static struct pci_driver it8172_pci_driver = {
-	.name		= "IT8172_IDE",
-	.id_table	= it8172_pci_tbl,
-	.probe		= it8172_init_one,
-	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
-};
-
-static int __init it8172_ide_init(void)
-{
-	return ide_pci_register_driver(&it8172_pci_driver);
-}
-
-static void __exit it8172_ide_exit(void)
-{
-	pci_unregister_driver(&it8172_pci_driver);
-}
-
-module_init(it8172_ide_init);
-module_exit(it8172_ide_exit);
-
-MODULE_AUTHOR("Steve Longerbeam");
-MODULE_DESCRIPTION("PCI driver module for ITE 8172 IDE");
-MODULE_LICENSE("GPL");