Merge tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:
 "The big change in this round is that we're finally in a position where
  we can sanely remove the old drivers/ide/ code, as libata covers
  everything we need by now.

  This is exciting for two reasons:

   1) we delete a lot of legacy code that doesn't really meet the
      standards we have today, and

   2) it enables us to clean up various bits in the block layer that
      exist only because of the old IDE code.

  Outside of that, just a few minor fixes here, fixups for warnings,
  etc"

* tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block: (29 commits)
  ata: rb532_cf: remove redundant codes
  ide: remove the legacy ide driver
  m68k: use libata instead of the legacy ide driver
  ARM: disable CONFIG_IDE in pxa_defconfig
  ARM: disable CONFIG_IDE in footbridge_defconfig
  alpha: use libata instead of the legacy ide driver
  pata_cypress: add a module option to disable BM-DMA
  ata: pata_macio: Avoid overwriting initialised field in 'pata_macio_sht'
  ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht
  ata: pata_sc1200: sc1200_sht'Avoid overwriting initialised field in '
  ata: pata_cs5530: Avoid overwriting initialised field in 'cs5530_sht'
  ata: pata_cs5520: Avoid overwriting initialised field in 'cs5520_sht'
  ata: pata_atiixp: Avoid overwriting initialised field in 'atiixp_sht'
  ata: sata_nv: Do not over-write initialise fields in 'nv_adma_sht' and 'nv_swncq_sht'
  ata: sata_mv: Do not over-write initialise fields in 'mv6_sht'
  ata: sata_sil24: Do not over-write initialise fields in 'sil24_sht'
  ata: ahci: Ensure initialised fields are not overwritten in AHCI_SHT()
  ata: include: libata: Move fields commonly over-written to separate MACRO
  ahci: Add support for Dell S140 and later controllers
  ata: ahci_sunxi: Disable DIPM
  ...

1 files changed, 0 insertions, 238 deletions

diff --git a/drivers/ide/buddha.c b/drivers/ide/buddha.c
deleted file mode 100644
index 46eaf58d881b..000000000000
--- a/drivers/ide/buddha.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- *  Amiga Buddha, Catweasel and X-Surf IDE Driver
- *
- *	Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
- *
- *  This driver was written based on the specifications in README.buddha and
- *  the X-Surf info from Inside_XSurf.txt available at
- *  http://www.jschoenfeld.com
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive for
- *  more details.
- *
- *  TODO:
- *    - test it :-)
- *    - tune the timings using the speed-register
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/zorro.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-
-
-    /*
-     *  The Buddha has 2 IDE interfaces, the Catweasel has 3, X-Surf has 2
-     */
-
-#define BUDDHA_NUM_HWIFS	2
-#define CATWEASEL_NUM_HWIFS	3
-#define XSURF_NUM_HWIFS         2
-
-#define MAX_NUM_HWIFS		3
-
-    /*
-     *  Bases of the IDE interfaces (relative to the board address)
-     */
-
-#define BUDDHA_BASE1	0x800
-#define BUDDHA_BASE2	0xa00
-#define BUDDHA_BASE3	0xc00
-
-#define XSURF_BASE1     0xb000 /* 2.5" Interface */
-#define XSURF_BASE2     0xd000 /* 3.5" Interface */
-
-static u_int buddha_bases[CATWEASEL_NUM_HWIFS] __initdata = {
-    BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
-};
-
-static u_int xsurf_bases[XSURF_NUM_HWIFS] __initdata = {
-     XSURF_BASE1, XSURF_BASE2
-};
-
-    /*
-     *  Offsets from one of the above bases
-     */
-
-#define BUDDHA_CONTROL	0x11a
-
-    /*
-     *  Other registers
-     */
-
-#define BUDDHA_IRQ1	0xf00		/* MSB = 1, Harddisk is source of */
-#define BUDDHA_IRQ2	0xf40		/* interrupt */
-#define BUDDHA_IRQ3	0xf80
-
-#define XSURF_IRQ1      0x7e
-#define XSURF_IRQ2      0x7e
-
-static int buddha_irqports[CATWEASEL_NUM_HWIFS] __initdata = {
-    BUDDHA_IRQ1, BUDDHA_IRQ2, BUDDHA_IRQ3
-};
-
-static int xsurf_irqports[XSURF_NUM_HWIFS] __initdata = {
-    XSURF_IRQ1, XSURF_IRQ2
-};
-
-#define BUDDHA_IRQ_MR	0xfc0		/* master interrupt enable */
-
-
-    /*
-     *  Board information
-     */
-
-typedef enum BuddhaType_Enum {
-    BOARD_BUDDHA, BOARD_CATWEASEL, BOARD_XSURF
-} BuddhaType;
-
-static const char *buddha_board_name[] = { "Buddha", "Catweasel", "X-Surf" };
-
-    /*
-     *  Check and acknowledge the interrupt status
-     */
-
-static int buddha_test_irq(ide_hwif_t *hwif)
-{
-    unsigned char ch;
-
-    ch = z_readb(hwif->io_ports.irq_addr);
-    if (!(ch & 0x80))
-	    return 0;
-    return 1;
-}
-
-static void xsurf_clear_irq(ide_drive_t *drive)
-{
-    /*
-     * X-Surf needs 0 written to IRQ register to ensure ISA bit A11 stays at 0
-     */
-    z_writeb(0, drive->hwif->io_ports.irq_addr);
-}
-
-static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base,
-				      unsigned long ctl, unsigned long irq_port)
-{
-	int i;
-
-	memset(hw, 0, sizeof(*hw));
-
-	hw->io_ports.data_addr = base;
-
-	for (i = 1; i < 8; i++)
-		hw->io_ports_array[i] = base + 2 + i * 4;
-
-	hw->io_ports.ctl_addr = ctl;
-	hw->io_ports.irq_addr = irq_port;
-
-	hw->irq = IRQ_AMIGA_PORTS;
-}
-
-static const struct ide_port_ops buddha_port_ops = {
-	.test_irq		= buddha_test_irq,
-};
-
-static const struct ide_port_ops xsurf_port_ops = {
-	.clear_irq		= xsurf_clear_irq,
-	.test_irq		= buddha_test_irq,
-};
-
-static const struct ide_port_info buddha_port_info = {
-	.port_ops		= &buddha_port_ops,
-	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
-	.irq_flags		= IRQF_SHARED,
-	.chipset		= ide_generic,
-};
-
-    /*
-     *  Probe for a Buddha or Catweasel IDE interface
-     */
-
-static int __init buddha_init(void)
-{
-	struct zorro_dev *z = NULL;
-	u_long buddha_board = 0;
-	BuddhaType type;
-	int buddha_num_hwifs, i;
-
-	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
-		unsigned long board;
-		struct ide_hw hw[MAX_NUM_HWIFS], *hws[MAX_NUM_HWIFS];
-		struct ide_port_info d = buddha_port_info;
-
-		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
-			buddha_num_hwifs = BUDDHA_NUM_HWIFS;
-			type=BOARD_BUDDHA;
-		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
-			buddha_num_hwifs = CATWEASEL_NUM_HWIFS;
-			type=BOARD_CATWEASEL;
-		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
-			buddha_num_hwifs = XSURF_NUM_HWIFS;
-			type=BOARD_XSURF;
-			d.port_ops = &xsurf_port_ops;
-		} else 
-			continue;
-		
-		board = z->resource.start;
-
-		if(type != BOARD_XSURF) {
-			if (!request_mem_region(board+BUDDHA_BASE1, 0x800, "IDE"))
-				continue;
-		} else {
-			if (!request_mem_region(board+XSURF_BASE1, 0x1000, "IDE"))
-				continue;
-			if (!request_mem_region(board+XSURF_BASE2, 0x1000, "IDE"))
-				goto fail_base2;
-			if (!request_mem_region(board+XSURF_IRQ1, 0x8, "IDE")) {
-				release_mem_region(board+XSURF_BASE2, 0x1000);
-fail_base2:
-				release_mem_region(board+XSURF_BASE1, 0x1000);
-				continue;
-			}
-		}	  
-		buddha_board = (unsigned long)ZTWO_VADDR(board);
-		
-		/* write to BUDDHA_IRQ_MR to enable the board IRQ */
-		/* X-Surf doesn't have this.  IRQs are always on */
-		if (type != BOARD_XSURF)
-			z_writeb(0, buddha_board+BUDDHA_IRQ_MR);
-
-		printk(KERN_INFO "ide: %s IDE controller\n",
-				 buddha_board_name[type]);
-
-		for (i = 0; i < buddha_num_hwifs; i++) {
-			unsigned long base, ctl, irq_port;
-
-			if (type != BOARD_XSURF) {
-				base = buddha_board + buddha_bases[i];
-				ctl = base + BUDDHA_CONTROL;
-				irq_port = buddha_board + buddha_irqports[i];
-			} else {
-				base = buddha_board + xsurf_bases[i];
-				/* X-Surf has no CS1* (Control/AltStat) */
-				ctl = 0;
-				irq_port = buddha_board + xsurf_irqports[i];
-			}
-
-			buddha_setup_ports(&hw[i], base, ctl, irq_port);
-
-			hws[i] = &hw[i];
-		}
-
-		ide_host_add(&d, hws, i, NULL);
-	}
-
-	return 0;
-}
-
-module_init(buddha_init);
-
-MODULE_LICENSE("GPL");