Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM Devicetree updates from Olof Johansson:
 "As usual, most of the changes are to devicetrees.

  Besides smaller fixes, some refactorings and cleanups, some of the new
  platforms and chips (or significant features) supported are below:

  Broadcom boards:
   - Cisco Meraki MR32 (BCM53016-based)
   - BCM2711 (RPi4) display pipeline support

  Actions Semi boards:
   - Caninos Loucos Labrador SBC (S500-based)
   - RoseapplePi SBC (S500-based)

  Allwinner SoCs/boards:
   - A100 SoC with Perf1 board
   - Mali, DMA, Cetrus and IR support for R40 SoC

  Amlogic boards:
   - Libretch S905x CC V2 board
   - Hardkernel ODROID-N2+ board

  Aspeed boards/platforms:
   - Wistron Mowgli (AST2500-based, Power9 OpenPower server)
   - Facebook Wedge400 (AST2500-based, ToR switch)

  Hisilicon SoC:
   - SD5203 SoC

  Nvidia boards:
   - Tegra234 VDK, for pre-silicon Orin SoC

  NXP i.MX boards:
   - Librem 5 phone
   - i.MX8MM DDR4 EVK
   - Variscite VAR-SOM-MX8MN SoM
   - Symphony board
   - Tolino Shine 2 HD
   - TQMa6 SoM
   - Y Soft IOTA Orion

  Rockchip boards:
   - NanoPi R2S board
   - A95X-Z2 board
   - more Rock-Pi4 variants

  STM32 boards:
   - Odyssey SOM board (STM32MP157CAC-based)
   - DH DRC02 board

  Toshiba SoCs/boards:
   - Visconti SoC and TPMV7708 board"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits)
  ARM: dts: nspire: Fix SP804 users
  arm64: dts: lg: Fix SP804 users
  arm64: dts: lg: Fix SP805 clocks
  ARM: mstar: Fix up the fallout from moving the dts/dtsi files
  ARM: mstar: Add mstar prefix to all of the dtsi/dts files
  ARM: mstar: Add interrupt to pm_uart
  ARM: mstar: Add interrupt controller to base dtsi
  ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
  arm64: dts: ti: k3-j7200-common-proc-board: Add USB support
  arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function
  arm64: dts: ti: k3-j7200-main: Add USB controller
  arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX
  arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux
  dt-bindings: ti-serdes-mux: Add defines for J7200 SoC
  ARM: dts: hisilicon: add SD5203 dts
  ARM: dts: hisilicon: fix the system controller compatible nodes
  arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
  arm64: dts: zynqmp: Remove undocumented u-boot properties
  arm64: dts: zynqmp: Remove additional compatible string for i2c IPs
  arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml
  ...

1 files changed, 37 insertions, 15 deletions

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 24ef18fe77df..533525229a8d 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -112,7 +112,29 @@
 		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
 	};
 
-	main_pmx0: pinmux@11c000 {
+	crypto: crypto@4e00000 {
+		compatible = "ti,am654-sa2ul";
+		reg = <0x0 0x4e00000 0x0 0x1200>;
+		power-domains = <&k3_pds 136 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>;
+		status = "okay";
+
+		dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
+				<&main_udmap 0x4001>;
+		dma-names = "tx", "rx1", "rx2";
+		dma-coherent;
+
+		rng: rng@4e10000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x0 0x4e10000 0x0 0x7d>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&k3_clks 136 1>;
+		};
+	};
+
+	main_pmx0: pinctrl@11c000 {
 		compatible = "pinctrl-single";
 		reg = <0x0 0x11c000 0x0 0x2e4>;
 		#pinctrl-cells = <1>;
@@ -120,7 +142,7 @@
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
-	main_pmx1: pinmux@11c2e8 {
+	main_pmx1: pinctrl@11c2e8 {
 		compatible = "pinctrl-single";
 		reg = <0x0 0x11c2e8 0x0 0x24>;
 		#pinctrl-cells = <1>;
@@ -283,7 +305,7 @@
 		no-1-8-v;
 	};
 
-	scm_conf: scm_conf@100000 {
+	scm_conf: scm-conf@100000 {
 		compatible = "syscon", "simple-mfd";
 		reg = <0 0x00100000 0 0x1c000>;
 		#address-cells = <1>;
@@ -305,12 +327,12 @@
 			reg = <0x00000210 0x4>;
 		};
 
-		serdes0_clk: serdes_clk@4080 {
+		serdes0_clk: clock@4080 {
 			compatible = "syscon";
 			reg = <0x00004080 0x4>;
 		};
 
-		serdes1_clk: serdes_clk@4090 {
+		serdes1_clk: clock@4090 {
 			compatible = "syscon";
 			reg = <0x00004090 0x4>;
 		};
@@ -322,12 +344,12 @@
 					<0x4090 0x3>; /* SERDES1 lane select */
 		};
 
-		dss_oldi_io_ctrl: dss_oldi_io_ctrl@41E0 {
+		dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
 			compatible = "syscon";
-			reg = <0x0000041E0 0x14>;
+			reg = <0x0000041e0 0x14>;
 		};
 
-		ehrpwm_tbclk: syscon@4140 {
+		ehrpwm_tbclk: clock@4140 {
 			compatible = "ti,am654-ehrpwm-tbclk", "syscon";
 			reg = <0x4140 0x18>;
 			#clock-cells = <1>;
@@ -423,7 +445,7 @@
 		ti,interrupt-ranges = <0 392 32>;
 	};
 
-	main_navss {
+	main-navss {
 		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -639,7 +661,7 @@
 		};
 	};
 
-	main_gpio0:  main_gpio0@600000 {
+	main_gpio0: gpio@600000 {
 		compatible = "ti,am654-gpio", "ti,keystone-gpio";
 		reg = <0x0 0x600000 0x0 0x100>;
 		gpio-controller;
@@ -654,7 +676,7 @@
 		clock-names = "gpio";
 	};
 
-	main_gpio1:  main_gpio1@601000 {
+	main_gpio1: gpio@601000 {
 		compatible = "ti,am654-gpio", "ti,keystone-gpio";
 		reg = <0x0 0x601000 0x0 0x100>;
 		gpio-controller;
@@ -682,7 +704,7 @@
 		ti,syscon-pcie-mode = <&pcie0_mode>;
 		bus-range = <0x0 0xff>;
 		num-viewport = <16>;
-		max-link-speed = <3>;
+		max-link-speed = <2>;
 		dma-coherent;
 		interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
 		msi-map = <0x0 &gic_its 0x0 0x10000>;
@@ -696,7 +718,7 @@
 		ti,syscon-pcie-mode = <&pcie0_mode>;
 		num-ib-windows = <16>;
 		num-ob-windows = <16>;
-		max-link-speed = <3>;
+		max-link-speed = <2>;
 		dma-coherent;
 		interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
 	};
@@ -714,7 +736,7 @@
 		ti,syscon-pcie-mode = <&pcie1_mode>;
 		bus-range = <0x0 0xff>;
 		num-viewport = <16>;
-		max-link-speed = <3>;
+		max-link-speed = <2>;
 		dma-coherent;
 		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
 		msi-map = <0x0 &gic_its 0x10000 0x10000>;
@@ -728,7 +750,7 @@
 		ti,syscon-pcie-mode = <&pcie1_mode>;
 		num-ib-windows = <16>;
 		num-ob-windows = <16>;
-		max-link-speed = <3>;
+		max-link-speed = <2>;
 		dma-coherent;
 		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
 	};