Merge tag 'cleanup-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull ARM SoC cleanups from Olof Johansson:
 "Cleanups for 3.16.  Among these are:

   - a bunch of misc cleanups for Broadcom platforms, mostly
     housekeeping
   - enabling Common Clock Framework on the older s3c24xx Samsung
     chipsets
   - cleanup of the Versatile Express system controller code, moving it
     to syscon
   - power management cleanups for OMAP platforms

  plus a handful of other cleanups across the place"

* tag 'cleanup-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
  ARM: kconfig: allow PCI support to be selected with ARCH_MULTIPLATFORM
  clk: samsung: fix build error
  ARM: vexpress: refine dependencies for new code
  clk: samsung: clk-s3c2410-dlck: do not use PNAME macro as it declares __initdata
  cpufreq: exynos: Fix the compile error
  ARM: S3C24XX: move debug-macro.S into the common space
  ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro
  ARM: S3C24XX: trim down debug uart handling
  ARM: compressed/head.S: remove s3c24xx special case
  ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
  ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
  ARM: EXYNOS: Remove exynos_subsys registration
  ARM: EXYNOS: Remove duplicate lines in Makefile
  ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling
  ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files
  ARM: OMAP3/4: PRM: add support of late_init call to prm_ll_ops
  ARM: OMAP3/OMAP4: PRM: add prm_features flags and add IO wakeup under it
  ARM: OMAP3/4: PRM: provide io chain reconfig function through irq setup
  ARM: OMAP2+: PRM: remove unnecessary cpu_is_XXX calls from prm_init / exit
  ARM: OMAP2+: PRCM: cleanup some header includes
  ...

1 files changed, 10 insertions, 10 deletions

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 44bb4d544dcf..751f3549bf6f 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -151,32 +151,32 @@ void __iomem *omap_ctrl_base_get(void)
 
 u8 omap_ctrl_readb(u16 offset)
 {
-	return __raw_readb(OMAP_CTRL_REGADDR(offset));
+	return readb_relaxed(OMAP_CTRL_REGADDR(offset));
 }
 
 u16 omap_ctrl_readw(u16 offset)
 {
-	return __raw_readw(OMAP_CTRL_REGADDR(offset));
+	return readw_relaxed(OMAP_CTRL_REGADDR(offset));
 }
 
 u32 omap_ctrl_readl(u16 offset)
 {
-	return __raw_readl(OMAP_CTRL_REGADDR(offset));
+	return readl_relaxed(OMAP_CTRL_REGADDR(offset));
 }
 
 void omap_ctrl_writeb(u8 val, u16 offset)
 {
-	__raw_writeb(val, OMAP_CTRL_REGADDR(offset));
+	writeb_relaxed(val, OMAP_CTRL_REGADDR(offset));
 }
 
 void omap_ctrl_writew(u16 val, u16 offset)
 {
-	__raw_writew(val, OMAP_CTRL_REGADDR(offset));
+	writew_relaxed(val, OMAP_CTRL_REGADDR(offset));
 }
 
 void omap_ctrl_writel(u32 val, u16 offset)
 {
-	__raw_writel(val, OMAP_CTRL_REGADDR(offset));
+	writel_relaxed(val, OMAP_CTRL_REGADDR(offset));
 }
 
 /*
@@ -188,12 +188,12 @@ void omap_ctrl_writel(u32 val, u16 offset)
 
 u32 omap4_ctrl_pad_readl(u16 offset)
 {
-	return __raw_readl(OMAP4_CTRL_PAD_REGADDR(offset));
+	return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset));
 }
 
 void omap4_ctrl_pad_writel(u32 val, u16 offset)
 {
-	__raw_writel(val, OMAP4_CTRL_PAD_REGADDR(offset));
+	writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset));
 }
 
 #ifdef CONFIG_ARCH_OMAP3
@@ -222,7 +222,7 @@ void omap3_ctrl_write_boot_mode(u8 bootmode)
 	 *
 	 * XXX This should use some omap_ctrl_writel()-type function
 	 */
-	__raw_writel(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4));
+	writel_relaxed(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4));
 }
 
 #endif
@@ -285,7 +285,7 @@ void omap3_clear_scratchpad_contents(void)
 	if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
 	    OMAP3430_GLOBAL_COLD_RST_MASK) {
 		for ( ; offset <= max_offset; offset += 0x4)
-			__raw_writel(0x0, (v_addr + offset));
+			writel_relaxed(0x0, (v_addr + offset));
 		omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
 					   OMAP3430_GR_MOD,
 					   OMAP3_PRM_RSTST_OFFSET);