Merge tag 'qcom-arm64-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm ARM64 DeviceTree updates for v6.7

The SM7125 platform is introduced, with support for Xiaomi Redmi Note 9
Pro. Support for Fairphone 5, on QCM6490, and BQ Aquaris M5, on MSM8939,
are introduced.

With the various QMP PHY bindings having been refactored, SC7180,
SC7280, SDM845, SM8150, and SM8250 are transitioned to the new USB/DP
combo PHY binding. IPQ6018, IPQ8074 MSM8998, SC7280, SC8180X, SDM845,
SM8150, SM8250, and SM8450 are transitioned to the new PCIe PHY binding,
and SC8180X is transitioned to the new UFS phy binding.

The UFS power supply situation is clarified, and a range of boards
across MSM8996, MSM8998, SM4250, SM6115, SM6125, SM8350, SM8450, and
SM8550 receives corrections for this.

On IPQ5018 watchdog support is introduced, and the SCM driver has SDI
(debug image) enabled - so that it can be disabled. On IPQ5332 USB is
enabled. The hwspinlock identifier is corrected across IPQ5332, IPQ6018,
IPQ8074 and IPQ9574.

The reserved-memory ranges for the remoteprocs on MSM8916 boards are
refactored, to reduce the amount of duplicated boilerplate definitions.
A number of nodes are transitioned to be disabled by default, to
facilitate new boards.
Samsung Galaxy Tab A 8.0 and Samsung Galaxy Tab A 9.7 gains display
support, and the latter capacitive keys. Samsung Galaxy J5 gains
accelerometer support. The Dragonboard 410c gains missing ADC7533
regulator definition, and an overlay forcing the board to operate in
host mode, for automation purposes.

On MSM8976, the outgoing IPC bits for modem and wcss are corrected, and
reserved-memory regions are updated.

Incorrect reserved-memory regions are also corrected for MSM8992 and
MSM8994 devices.

The QRB2210 RB1 board gets debug UART moved per hardware update.
regulator voltage ranges are corrected, remoteprocs are enabled, USB
SuperSpeed PHY is enabled, and GPIO LEDs are introduced for Bluetooth,
WiFi and a user LED.

Interrupts are described for the SGMII PHYs on SA8775P Ride platform,
and the inline crypto engine is introduced for UFS.

On SC7180 the audio DSP remoteproc is introduced. Additional SKUs of the
Lazor boards are added.The RT5682 audio codec part is reorganized to be
easier to maintain. On Trogdor devices, the touchscreen and display
panels are linked to improve the power cycling behavior across the two.

On SC7280 the cpuidle states are rewritten to support OS-initiated PCSI
mode. LMH interrupts are added, to receive feedback when throttling
occurs. The embedded usb debugger (EUD) description  and the dummy
usb-c-connector node is removed, as this is not correctly described. The
USB3 pipe clock input of the global clock controller is properly
described.

Modem remoteproc is introduced on SDM630, and the SDM670 PDC mapping is
corrected.

On the SDM845 MTP PCIe support is introduced. The volumn down and reset
buttons are defined. Remoteproc firmware names and the WiFI
configuration is corrected.
On Sony Xperia XZ2, XZ2 Compact, and XZ3 GPIO lines names are provided
for TLMM and PMICs. The camera regulators are also added.

Display hardware blocks are added to SM6125, and enabled on Sony Xperia
10 II.

The ref clock is wired up to PCIe PHY on SM8150.

On SM8250/QRB5165, and the RB5 board, the DisplayPort controller and the
TCPM is introduced, with all the plumbing to get USB role and
orientation switching, as well as DisplayPort altmode to work.
Interconnects and power-domains are also described for the QUPs on this
platform.

Previously ignored PMICs are described for the SM8350 Hardware
Development Kit (HDK), and PMR735a regulators are introduced. The
pinctrl state for uart18 is corrected.

On SM8450 HDK audio routes are corrected, to enable the analog
microphones on the board. The addition of the PRNG is reverted, in favor
of an upcoming additon of a true RNG.

Constants are replaced with QCOM_SCM_VMID_* defines on a variety of
boards.

The SM8550 QRD board gets Bluetooth support, and the camera clock
controller is described.

Additionally, a number of fixes are introduced in a variety of platforms
and boards, to align with Devicetree bindings.

* tag 'qcom-arm64-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (148 commits)
  arm64: dts: qcom: apq8016-sbc: Add missing ADV7533 regulators
  ARM: dts: qcom: sdx65-mtp: Specify PM7250B SID to use
  arm64: dts: qcom: apq8016-sbc: Add overlay for usb host mode
  arm64: dts: qcom: qcm6490: Add device-tree for Fairphone 5
  dt-bindings: arm: qcom: Add QCM6490 Fairphone 5
  arm64: dts: qcom: pm8350c: Add flash led node
  arm64: dts: qcom: pm7250b: make SID configurable
  arm64: dts: qcom: sc7280: Mark some nodes as 'reserved'
  arm64: dts: qcom: msm8939: Fix iommu local address range
  arm64: dts: qcom: ipq5018: indicate that SDI should be disabled
  arm64: dts: qcom: msm8976: Fix ipc bit shifts
  arm64: dts: qcom: msm8976: Split lpass region
  arm64: dts: qcom: pm8150l: Add wled node
  arm64: dts: qcom: sa8775p: enable the inline crypto engine
  arm64: dts: qcom: msm8916/39: Fix venus memory size
  arm64: dts: qcom: msm8916/39: Move mpss_mem size to boards
  arm64: dts: qcom: msm8916/39: Disable unneeded firmware reservations
  arm64: dts: qcom: msm8939: Reserve firmware memory dynamically
  arm64: dts: qcom: msm8916: Reserve MBA memory dynamically
  arm64: dts: qcom: msm8916: Reserve firmware memory dynamically
  ...

Link: https://lore.kernel.org/r/20231015191107.854658-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 4 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
index fcf1c51c5e7a..9649c859a2c3 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
@@ -4,6 +4,10 @@
  */
 /dts-v1/;
 
+/* PM7250B is configured to use SID2/3 */
+#define PM7250B_SID 2
+#define PM7250B_SID1 3
+
 #include "qcom-sdx65.dtsi"
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pmk8350.dtsi>