diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2020-12-19 21:31:55 +0100 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2021-01-13 13:12:20 +0100 |
| commit | 5282da459a97640ad2d12029665fa8c0a09d72a2 (patch) | |
| tree | a49ee27134d1f32bda25adf51d69d135a324522f /arch/arm/boot/dts/ste-hrefv60plus.dtsi | |
| parent | ace79dd1b0d99a3789809d94a00d230d76f61c57 (diff) | |
ARM: dts: ux500: Push VMMCI down to each tree
The setting of VMMCI differs so much between different
boards that we need to handle it on a per-board basis
rather that complicating things by overriding stuff from
the included DTSI:s. Push it down into top-level tree
instead.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/ste-hrefv60plus.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/ste-hrefv60plus.dtsi | 16 |
1 files changed, 0 insertions, 16 deletions
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index ee0bf00a94b8..05ea12e6df1c 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -194,12 +194,6 @@ cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95 }; - vmmci: regulator-gpio { - gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; - enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - pinctrl { /* * Set this up using hogs, as time goes by and as seems fit, these @@ -224,16 +218,6 @@ pins = "GPIO95_E8"; ste,config = <&gpio_in_pu>; }; - /* VMMCI level-shifter enable */ - default_hrefv60_cfg2 { - pins = "GPIO169_D22"; - ste,config = <&gpio_out_hi>; - }; - /* VMMCI level-shifter voltage select */ - default_hrefv60_cfg3 { - pins = "GPIO5_AG6"; - ste,config = <&gpio_out_hi>; - }; }; }; ipgpio { |