blaster4385/linux-IllusionX/tools/testing/selftests/drivers/net/bonding/Makefile, branch v6.13

selftests: forwarding: Remove duplicated lib.sh content

2024-01-31T10:55:11Z

commit 25ae948b4478 ("selftests/net: add lib.sh") added net/lib.sh to contain code shared by tests under net/ and net/forwarding/. However, this caused issues with selftests from directories other than net/forwarding/, in particular those under drivers/net/. Those issues were avoided in a simple way by duplicating some content in commit 2114e83381d3 ("selftests: forwarding: Avoid failures to source net/lib.sh"). In order to remove the duplicated content, restore the inclusion of net/lib.sh from net/forwarding/lib.sh but with the following changes: * net/lib.sh is imported through the net_forwarding_dir path The original expression "source ../lib.sh" would look for lib.sh in the directory above the script file's one, which did not work for tests under drivers/net/. * net/lib.sh is added to TEST_INCLUDES Since net/forwarding/lib.sh now sources net/lib.sh, both of those files must be exported along with tests which source net/forwarding/lib.sh. Suggested-by: Hangbin Liu Reviewed-by: Hangbin Liu Signed-off-by: Petr Machata Signed-off-by: Benjamin Poirier Signed-off-by: David S. Miller

selftests: bonding: Add net/forwarding/lib.sh to TEST_INCLUDES

2024-01-31T10:55:11Z

In order to avoid duplicated files when both the bonding and forwarding tests are exported together, add net/forwarding/lib.sh to TEST_INCLUDES and include it via its relative path. Reviewed-by: Petr Machata Tested-by: Petr Machata Reviewed-by: Hangbin Liu Signed-off-by: Benjamin Poirier Reviewed-by: Jay Vosburgh Signed-off-by: David S. Miller

selftests: bonding: add macvlan over bond testing

2023-08-24T08:07:13Z

Add a macvlan over bonding test with mode active-backup, balance-tlb and balance-alb. ]# ./bond_macvlan.sh TEST: active-backup: IPv4: client->server [ OK ] TEST: active-backup: IPv6: client->server [ OK ] TEST: active-backup: IPv4: client->macvlan_1 [ OK ] TEST: active-backup: IPv6: client->macvlan_1 [ OK ] TEST: active-backup: IPv4: client->macvlan_2 [ OK ] TEST: active-backup: IPv6: client->macvlan_2 [ OK ] TEST: active-backup: IPv4: macvlan_1->macvlan_2 [ OK ] TEST: active-backup: IPv6: macvlan_1->macvlan_2 [ OK ] TEST: active-backup: IPv4: server->client [ OK ] TEST: active-backup: IPv6: server->client [ OK ] TEST: active-backup: IPv4: macvlan_1->client [ OK ] TEST: active-backup: IPv6: macvlan_1->client [ OK ] TEST: active-backup: IPv4: macvlan_2->client [ OK ] TEST: active-backup: IPv6: macvlan_2->client [ OK ] TEST: active-backup: IPv4: macvlan_2->macvlan_2 [ OK ] TEST: active-backup: IPv6: macvlan_2->macvlan_2 [ OK ] [...] TEST: balance-alb: IPv4: client->server [ OK ] TEST: balance-alb: IPv6: client->server [ OK ] TEST: balance-alb: IPv4: client->macvlan_1 [ OK ] TEST: balance-alb: IPv6: client->macvlan_1 [ OK ] TEST: balance-alb: IPv4: client->macvlan_2 [ OK ] TEST: balance-alb: IPv6: client->macvlan_2 [ OK ] TEST: balance-alb: IPv4: macvlan_1->macvlan_2 [ OK ] TEST: balance-alb: IPv6: macvlan_1->macvlan_2 [ OK ] TEST: balance-alb: IPv4: server->client [ OK ] TEST: balance-alb: IPv6: server->client [ OK ] TEST: balance-alb: IPv4: macvlan_1->client [ OK ] TEST: balance-alb: IPv6: macvlan_1->client [ OK ] TEST: balance-alb: IPv4: macvlan_2->client [ OK ] TEST: balance-alb: IPv6: macvlan_2->client [ OK ] TEST: balance-alb: IPv4: macvlan_2->macvlan_2 [ OK ] TEST: balance-alb: IPv6: macvlan_2->macvlan_2 [ OK ] Signed-off-by: Hangbin Liu Acked-by: Jay Vosburgh Signed-off-by: Paolo Abeni

selftest: bond: add new topo bond_topo_2d1c.sh

2023-08-24T08:07:13Z

Add a new testing topo bond_topo_2d1c.sh which is used more commonly. Make bond_topo_3d1c.sh just source bond_topo_2d1c.sh and add the extra link. Signed-off-by: Hangbin Liu Acked-by: Jay Vosburgh Signed-off-by: Paolo Abeni

selftests: bonding: re-format bond option tests

2023-04-07T07:47:20Z

To improve the testing process for bond options, A new bond topology lib is added to our testing setup. The current option_prio.sh file will be renamed to bond_options.sh so that all bonding options can be tested here. Specifically, for priority testing, we will run all tests using modes 1, 5, and 6. These changes will help us streamline the testing process and ensure that our bond options are rigorously evaluated. Acked-by: Jay Vosburgh Signed-off-by: Hangbin Liu Acked-by: Jonathan Toppins Signed-off-by: David S. Miller

selftests: bonding: add tests for ether type changes

2023-03-17T07:56:41Z

Add new network selftests for the bonding device which exercise the ether type changing call paths. They also test for the recent syzbot bug[1] which causes a warning and results in wrong device flags (IFF_SLAVE missing). The test adds three bond devices and a nlmon device, enslaves one of the bond devices to the other and then uses the nlmon device for successful and unsuccesful enslaves both of which change the bond ether type. Thus we can test for both MASTER and SLAVE flags at the same time. If the flags are properly restored we get: TEST: Change ether type of an enslaved bond device with unsuccessful enslave [ OK ] TEST: Change ether type of an enslaved bond device with successful enslave [ OK ] [1] https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef Signed-off-by: Nikolay Aleksandrov Reviewed-by: Michal Kubiak Acked-by: Jonathan Toppins Acked-by: Jay Vosburgh Signed-off-by: David S. Miller

selftests: bonding: add bonding prio option test

2022-12-14T03:19:54Z

Add a test for bonding prio option. Here is the test result: ]# ./option_prio.sh TEST: prio_test (Test bonding option 'prio' with mode=1 monitor=arp_ip_target and primary_reselect=0) [ OK ] TEST: prio_test (Test bonding option 'prio' with mode=1 monitor=arp_ip_target and primary_reselect=1) [ OK ] TEST: prio_test (Test bonding option 'prio' with mode=1 monitor=arp_ip_target and primary_reselect=2) [ OK ] TEST: prio_test (Test bonding option 'prio' with mode=1 monitor=miimon and primary_reselect=0) [ OK ] TEST: prio_test (Test bonding option 'prio' with mode=1 monitor=miimon and primary_reselect=1) [ OK ] TEST: prio_test (Test bonding option 'prio' with mode=1 monitor=miimon and primary_reselect=2) [ OK ] TEST: prio_test (Test bonding option 'prio' with mode=5 monitor=miimon and primary_reselect=0) [ OK ] TEST: prio_test (Test bonding option 'prio' with mode=5 monitor=miimon and primary_reselect=1) [ OK ] TEST: prio_test (Test bonding option 'prio' with mode=5 monitor=miimon and primary_reselect=2) [ OK ] TEST: prio_test (Test bonding option 'prio' with mode=6 monitor=miimon and primary_reselect=0) [ OK ] TEST: prio_test (Test bonding option 'prio' with mode=6 monitor=miimon and primary_reselect=1) [ OK ] TEST: prio_test (Test bonding option 'prio' with mode=6 monitor=miimon and primary_reselect=2) [ OK ] Signed-off-by: Liang Li Signed-off-by: Hangbin Liu Signed-off-by: Jakub Kicinski

selftests: bonding: up/down delay w/ slave link flapping

2022-11-24T04:14:48Z

Verify when a bond is configured with {up,down}delay and the link state of slave members flaps if there are no remaining members up the bond should immediately select a member to bring up. (from bonding.txt section 13.1 paragraph 4) Suggested-by: Liang Li Signed-off-by: Jonathan Toppins Signed-off-by: Jakub Kicinski

selftests: net: Fix cross-tree inclusion of scripts

2022-10-21T04:09:22Z

When exporting and running a subset of selftests via kselftest, files from parts of the source tree which were not exported are not available. A few tests are trying to source such files. Address the problem by using symlinks. The problem can be reproduced by running: make -C tools/testing/selftests gen_tar TARGETS="drivers/net/bonding" [... extract archive ...] ./run_kselftest.sh or: make kselftest KBUILD_OUTPUT=/tmp/kselftests TARGETS="drivers/net/bonding" Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management") Fixes: eccd0a80dc7f ("selftests: net: dsa: add a stress test for unlocked FDB operations") Link: https://lore.kernel.org/netdev/40f04ded-0c86-8669-24b1-9a313ca21076@redhat.com/ Reported-by: Jonathan Toppins Signed-off-by: Benjamin Poirier Reviewed-by: Jonathan Toppins Signed-off-by: Jakub Kicinski

selftests/bonding: re-add lladdr target test

2022-09-23T13:26:05Z

It looks like this test has been accidentally dropped when resolving conflicts in this Makefile. Most probably because there were 3 different patches modifying this file in parallel: commit 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") commit bbb774d921e2 ("net: Add tests for bonding and team address list management") commit 2ffd57327ff1 ("selftests: bonding: cause oops in bond_rr_gen_slave_id") The first one was applied in 'net-next' while the two other ones were recently applied in the 'net' tree. But that's alright, easy to fix by re-adding the missing one! Fixes: 0140a7168f8b ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") Signed-off-by: Matthieu Baerts Link: https://lore.kernel.org/r/20220923082306.2468081-1-matthieu.baerts@tessares.net Signed-off-by: Jakub Kicinski