blaster4385/linux-IllusionX/sound/drivers, branch v6.12.1Linux kernel with personal config changes for arch linuxhttp://git.tablaster.dev/blaster4385/linux-IllusionX/atom?h=v6.12.12024-08-18T07:55:54ZALSA: aloop: Allow using global timers2024-08-18T07:55:54ZIvan Orlovivan.orlov0322@gmail.com2024-08-13T12:06:58Zurn:sha1:e949df0b021cdd503c4e72db12b1b4154a82d698
Allow using global timers as a timer source when card id is equal to -1
in the timer_source parameter.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240813120701.171743-2-ivan.orlov0322@gmail.com
ALSA: pcsp: Use standard print API2024-08-08T05:47:23ZTakashi Iwaitiwai@suse.de2024-08-07T13:34:04Zurn:sha1:9cbe416b9356e84863dff02112d3d3c095f881f8
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-15-tiwai@suse.de
ALSA: dummy: Use standard print API2024-08-08T05:47:23ZTakashi Iwaitiwai@suse.de2024-08-07T13:34:03Zurn:sha1:650dcf25e181ff1dc4f9f107f1fa71e802c14d1b
Use pr_*() macro instead of open-coded printk() just for code
simplification.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-14-tiwai@suse.de
ALSA: aloop: Use standard print API2024-08-08T05:47:23ZTakashi Iwaitiwai@suse.de2024-08-07T13:34:02Zurn:sha1:ca2f73ffaadacb14a7232aee5c2b5854483f5c40
Use pr_err() instead of open-coded printk() just for code
simplification.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-13-tiwai@suse.de
ALSA: vx_core: Use standard print API2024-08-08T05:47:23ZTakashi Iwaitiwai@suse.de2024-08-07T13:34:01Zurn:sha1:41abc8056dd3125d4a9b7ac0f4087dfb67580d95
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The commented old debug prints are dropped, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-12-tiwai@suse.de
ALSA: vx_core: Drop unused dev field2024-08-08T05:47:23ZTakashi Iwaitiwai@suse.de2024-08-07T13:34:00Zurn:sha1:b426b3ba9f6fe17990893c5324727dd217d420b6
The vx_core.dev field has never been set but referred incorrectly at
firmware loading. Pass the proper device pointer from card->dev at
request_firmware(), and drop the unused dev field from vx_core, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-11-tiwai@suse.de
ALSA: virmidi: Use standard print API2024-08-08T05:47:23ZTakashi Iwaitiwai@suse.de2024-08-07T13:33:59Zurn:sha1:b5557ef985301d7ca2ba08f8e9c22ba4f8c30d5d
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-10-tiwai@suse.de
ALSA: serial-u16550: Use standard print API2024-08-08T05:47:23ZTakashi Iwaitiwai@suse.de2024-08-07T13:33:58Zurn:sha1:4d82bf10d1625d4b19443af1aaeca2b4202e0334
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-9-tiwai@suse.de
ALSA: opl4: Use standard print API2024-08-08T05:47:23ZTakashi Iwaitiwai@suse.de2024-08-07T13:33:57Zurn:sha1:7debf0350e264c431f8c029a15d799317dd5d052
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-8-tiwai@suse.de
ALSA: opl3: Use standard print API2024-08-08T05:47:22ZTakashi Iwaitiwai@suse.de2024-08-07T13:33:56Zurn:sha1:a2fa882d6dea19b4488b10f40334e04c77503ffc
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some debug prints are cleaned up with a macro, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-7-tiwai@suse.de