blaster4385/linux-IllusionX/net/rfkill, branch v6.12.1

[tree-wide] finally take no_llseek out

2024-09-27T15:18:43Z

no_llseek had been defined to NULL two years ago, in commit 868941b14441 ("fs: remove no_llseek") To quote that commit, At -rc1 we'll need do a mechanical removal of no_llseek - git grep -l -w no_llseek | grep -v porting.rst | while read i; do sed -i '/\/d' $i done would do it. Unfortunately, that hadn't been done. Linus, could you do that now, so that we could finally put that thing to rest? All instances are of the form .llseek = no_llseek, so it's obviously safe. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds

wifi: rfkill: Correct parameter type for rfkill_set_hw_state_reason()

2024-08-27T08:28:55Z

Change type of parameter @reason to enum rfkill_hard_block_reasons for API rfkill_set_hw_state_reason() according to its comments, and all kernel callers have invoked the API with enum type actually. Signed-off-by: Zijun Hu Link: https://patch.msgid.link/20240811-rfkill_fix-v2-1-9050760336f4@quicinc.com Signed-off-by: Johannes Berg

net: rfkill: gpio: Do not load on Lenovo Yoga Tab 3 Pro YT3-X90

2024-08-27T08:28:55Z

The Lenovo Yoga Tab 3 Pro YT3-X90 has a non functional "BCM4752" ACPI device, which uses GPIO resources which are actually necessary / used for the sound (codec, speaker amplifier) on the Lenovo Yoga Tab 3 Pro. If the rfkill-gpio driver loads before the sound drivers do the sound drivers fail to load because the GPIOs are already claimed. Add a DMI based deny list with the Lenovo Yoga Tab 3 Pro on there and make rfkill_gpio_probe() exit with -ENODEV for devices on the DMI based deny list. Signed-off-by: Hans de Goede Link: https://patch.msgid.link/20240825131916.6388-1-hdegoede@redhat.com Signed-off-by: Johannes Berg

net: rfkill: Correct return value in invalid parameter case

2024-06-26T08:49:01Z

rfkill_set_hw_state_reason() does not return current combined block state when its parameter @reason is invalid, that is wrong according to its comments, fix it by correcting the value returned. Also reformat the WARN while at it. Signed-off-by: Zijun Hu Link: https://patch.msgid.link/1718287476-28227-1-git-send-email-quic_zijuhu@quicinc.com [edit/reformat commit message, remove unneeded variable] Signed-off-by: Johannes Berg

net: rfkill: gpio: Convert to platform remove callback returning void

2024-03-25T14:40:22Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Reviewed-by: Jeff Johnson Link: https://msgid.link/20240306183538.88777-2-u.kleine-koenig@pengutronix.de Signed-off-by: Johannes Berg

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-12-21T21:17:23Z

Cross-merge networking fixes after downstream PR. Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c 23c93c3b6275 ("bnxt_en: do not map packet buffers twice") 6d1add95536b ("bnxt_en: Modify TX ring indexing logic.") tools/testing/selftests/net/Makefile 2258b666482d ("selftests: add vlan hw filter tests") a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit") Signed-off-by: Paolo Abeni

net: rfkill: gpio: set GPIO direction

2023-12-12T09:14:57Z

Fix the undefined usage of the GPIO consumer API after retrieving the GPIO description with GPIO_ASIS. The API documentation mentions that GPIO_ASIS won't set a GPIO direction and requires the user to set a direction before using the GPIO. This can be confirmed on i.MX6 hardware, where rfkill-gpio is no longer able to enabled/disable a device, presumably because the GPIO controller was never configured for the output direction. Fixes: b2f750c3a80b ("net: rfkill: gpio: prevent value glitch during probe") Cc: stable@vger.kernel.org Signed-off-by: Rouven Czerwinski Link: https://msgid.link/20231207075835.3091694-1-r.czerwinski@pengutronix.de Signed-off-by: Johannes Berg

rfkill: return ENOTTY on invalid ioctl

2023-11-24T19:03:59Z

For unknown ioctls the correct error is ENOTTY "Inappropriate ioctl for device". ENOSYS as returned before should only be used to indicate that a syscall is not available at all. Signed-off-by: Thomas Weißschuh Reviewed-by: Przemek Kitszel Link: https://lore.kernel.org/r/20231101-rfkill-ioctl-enosys-v1-1-5bf374fabffe@weissschuh.net [in theory this breaks userspace API, but it was discussed and researched, and nothing found relying on the current behaviour] Signed-off-by: Johannes Berg

net: rfkill: reduce data->mtx scope in rfkill_fop_open

2023-10-11T14:55:10Z

In syzbot runs, lockdep reports that there's a (potential) deadlock here of data->mtx being locked recursively. This isn't really a deadlock since they are different instances, but lockdep cannot know, and teaching it would be far more difficult than other fixes. At the same time we don't even really _need_ the mutex to be locked in rfkill_fop_open(), since we're modifying only a completely fresh instance of 'data' (struct rfkill_data) that's not yet added to the global list. However, to avoid any reordering etc. within the globally locked section, and to make the code look more symmetric, we should still lock the data->events list manipulation, but also need to lock _only_ that. So do that. Reported-by: syzbot+509238e523e032442b80@syzkaller.appspotmail.com Fixes: 2c3dfba4cf84 ("rfkill: sync before userspace visibility/changes") Signed-off-by: Johannes Berg

net: rfkill: gpio: prevent value glitch during probe

2023-10-11T14:36:52Z

When either reset- or shutdown-gpio have are initially deasserted, e.g. after a reboot - or when the hardware does not include pull-down, there will be a short toggle of both IOs to logical 0 and back to 1. It seems that the rfkill default is unblocked, so the driver should not glitch to output low during probe. It can lead e.g. to unexpected lte modem reconnect: [1] root@localhost:~# dmesg | grep "usb 2-1" [ 2.136124] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 21.215278] usb 2-1: USB disconnect, device number 2 [ 28.833977] usb 2-1: new SuperSpeed USB device number 3 using xhci-hcd The glitch has been discovered on an arm64 board, now that device-tree support for the rfkill-gpio driver has finally appeared :). Change the flags for devm_gpiod_get_optional from GPIOD_OUT_LOW to GPIOD_ASIS to avoid any glitches. The rfkill driver will set the intended value during rfkill_sync_work. Fixes: 7176ba23f8b5 ("net: rfkill: add generic gpio rfkill driver") Signed-off-by: Josua Mayer Link: https://lore.kernel.org/r/20231004163928.14609-1-josua@solid-run.com Signed-off-by: Johannes Berg