blaster4385/linux-IllusionX/net/ethtool, branch v6.12.1

net: ethtool: phy: Don't set the context dev pointer for unfiltered DUMP

2024-09-14T04:40:12Z

The context info allows continuing DUMP requests, shall they fill the netlink buffer. In the case of filtered DUMP requests, a reference on the netdev is grabbed in the .start() callback and release in .done(). Unfiltered DUMP request don't need the dev pointer to be set in the context info, doing so will trigger an unwanted netdev_put() in .done(). Reported-by: syzbot+e9ed4e4368d450c8f9db@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/000000000000d3bf150621d361a7@google.com/ Fixes: 17194be4c8e1 ("net: ethtool: Introduce a command to list PHYs on an interface") Signed-off-by: Maxime Chevallier Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20240913100515.167341-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski

net: ethtool: Enhance error messages sent to user space

2024-09-14T04:12:27Z

During the firmware flashing process, notifications are sent to user space to provide progress updates. When an error occurs, an error message is sent to indicate what went wrong. In some cases, appropriate error messages are missing. Add relevant error messages where applicable, allowing user space to better understand the issues encountered. Signed-off-by: Danielle Ratson Reviewed-by: Petr Machata Reviewed-by: Simon Horman Link: https://patch.msgid.link/20240910091044.3044568-1-danieller@nvidia.com Signed-off-by: Jakub Kicinski

netdev: support binding dma-buf to netdevice

2024-09-12T03:44:31Z

Add a netdev_dmabuf_binding struct which represents the dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to rx queues on the netdevice. On the binding, the dma_buf_attach & dma_buf_map_attachment will occur. The entries in the sg_table from mapping will be inserted into a genpool to make it ready for allocation. The chunks in the genpool are owned by a dmabuf_chunk_owner struct which holds the dma-buf offset of the base of the chunk and the dma_addr of the chunk. Both are needed to use allocations that come from this chunk. We create a new type that represents an allocation from the genpool: net_iov. We setup the net_iov allocation size in the genpool to PAGE_SIZE for simplicity: to match the PAGE_SIZE normally allocated by the page pool and given to the drivers. The user can unbind the dmabuf from the netdevice by closing the netlink socket that established the binding. We do this so that the binding is automatically unbound even if the userspace process crashes. The binding and unbinding leaves an indicator in struct netdev_rx_queue that the given queue is bound, and the binding is actuated by resetting the rx queue using the queue API. The netdev_dmabuf_binding struct is refcounted, and releases its resources only when all the refs are released. Signed-off-by: Willem de Bruijn Signed-off-by: Kaiyuan Zhang Signed-off-by: Mina Almasry Reviewed-by: Pavel Begunkov # excluding netlink Acked-by: Daniel Vetter Reviewed-by: Jakub Kicinski Link: https://patch.msgid.link/20240910171458.219195-4-almasrymina@google.com Signed-off-by: Jakub Kicinski

net: ethtool: phy: Check the req_info.pdn field for GET commands

2024-09-11T23:38:10Z

When processing the netlink GET requests to get PHY info, the req_info.pdn pointer is NULL when no PHY matches the requested parameters, such as when the phy_index is invalid, or there's simply no PHY attached to the interface. Therefore, check the req_info.pdn pointer for NULL instead of dereferencing it. Suggested-by: Eric Dumazet Reported-by: Eric Dumazet Closes: https://lore.kernel.org/netdev/CANn89iKRW0WpGAh1tKqY345D8WkYCPm3Y9ym--Si42JZrQAu1g@mail.gmail.com/T/#mfced87d607d18ea32b3b4934dfa18d7b36669285 Fixes: 17194be4c8e1 ("net: ethtool: Introduce a command to list PHYs on an interface") Signed-off-by: Maxime Chevallier Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20240910174636.857352-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski

net-timestamp: introduce SOF_TIMESTAMPING_OPT_RX_FILTER flag

2024-09-10T23:55:23Z

introduce a new flag SOF_TIMESTAMPING_OPT_RX_FILTER in the receive path. User can set it with SOF_TIMESTAMPING_SOFTWARE to filter out rx software timestamp report, especially after a process turns on netstamp_needed_key which can time stamp every incoming skb. Previously, we found out if an application starts first which turns on netstamp_needed_key, then another one only passing SOF_TIMESTAMPING_SOFTWARE could also get rx timestamp. Now we handle this case by introducing this new flag without breaking users. Quoting Willem to explain why we need the flag: "why a process would want to request software timestamp reporting, but not receive software timestamp generation. The only use I see is when the application does request SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_TX_SOFTWARE." Similarly, this new flag could also be used for hardware case where we can set it with SOF_TIMESTAMPING_RAW_HARDWARE, then we won't receive hardware receive timestamp. Another thing about errqueue in this patch I have a few words to say: In this case, we need to handle the egress path carefully, or else reporting the tx timestamp will fail. Egress path and ingress path will finally call sock_recv_timestamp(). We have to distinguish them. Errqueue is a good indicator to reflect the flow direction. Suggested-by: Willem de Bruijn Signed-off-by: Jason Xing Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20240909015612.3856-2-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski

ethtool: RX software timestamp for all

2024-09-03T22:17:47Z

All devices support SOF_TIMESTAMPING_RX_SOFTWARE by virtue of net_timestamp_check() being called in the device independent code. Move the responsibility of reporting SOF_TIMESTAMPING_RX_SOFTWARE and SOF_TIMESTAMPING_SOFTWARE, and setting PHC index to -1 to the core. Device drivers no longer need to use them. Suggested-by: Willem de Bruijn Link: https://lore.kernel.org/netdev/661550e348224_23a2b2294f7@willemb.c.googlers.com.notmuch/ Co-developed-by: Rahul Rameshbabu Signed-off-by: Rahul Rameshbabu Signed-off-by: Gal Pressman Reviewed-by: Marc Kleine-Budde Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20240901112803.212753-2-gal@nvidia.com Signed-off-by: Jakub Kicinski

netdev_features: convert NETIF_F_FCOE_MTU to dev->fcoe_mtu

2024-09-03T09:36:43Z

Ability to handle maximum FCoE frames of 2158 bytes can never be changed and thus more of an attribute, not a toggleable feature. Move it from netdev_features_t to "cold" priv flags (bitfield bool) and free yet another feature bit. Signed-off-by: Alexander Lobakin Signed-off-by: Paolo Abeni

netdev_features: convert NETIF_F_NETNS_LOCAL to dev->netns_local

2024-09-03T09:36:43Z

"Interface can't change network namespaces" is rather an attribute, not a feature, and it can't be changed via Ethtool. Make it a "cold" private flag instead of a netdev_feature and free one more bit. Signed-off-by: Alexander Lobakin Signed-off-by: Paolo Abeni

netdev_features: convert NETIF_F_LLTX to dev->lltx

2024-09-03T09:36:43Z

NETIF_F_LLTX can't be changed via Ethtool and is not a feature, rather an attribute, very similar to IFF_NO_QUEUE (and hot). Free one netdev_features_t bit and make it a "hot" private flag. Signed-off-by: Alexander Lobakin Signed-off-by: Paolo Abeni

ethtool: pse-pd: move pse validation into set

2024-08-30T19:14:57Z

Move validation into set, removing .set_validate operation as its current implementation holds the rtnl lock for acquiring the PHY device, defeating the intended purpose of checking before grabbing the lock. Reported-by: syzbot+ec369e6d58e210135f71@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ec369e6d58e210135f71 Fixes: 31748765bed3 ("net: ethtool: pse-pd: Target the command to the requested PHY") Signed-off-by: Diogo Jahchan Koike Reviewed-by: Maxime Chevallier Link: https://patch.msgid.link/20240829184830.5861-1-djahchankoike@gmail.com Signed-off-by: Jakub Kicinski