blaster4385/linux-IllusionX/net/core/Makefile, branch v6.13

net: Implement fault injection forcing skb reallocation

2024-11-12T11:05:33Z

Introduce a fault injection mechanism to force skb reallocation. The primary goal is to catch bugs related to pointer invalidation after potential skb reallocation. The fault injection mechanism aims to identify scenarios where callers retain pointers to various headers in the skb but fail to reload these pointers after calling a function that may reallocate the data. This type of bug can lead to memory corruption or crashes if the old, now-invalid pointers are used. By forcing reallocation through fault injection, we can stress-test code paths and ensure proper pointer management after potential skb reallocations. Add a hook for fault injection in the following functions: * pskb_trim_rcsum() * pskb_may_pull_reason() * pskb_trim() As the other fault injection mechanism, protect it under a debug Kconfig called CONFIG_FAIL_SKB_REALLOC. This patch was *heavily* inspired by Jakub's proposal from: https://lore.kernel.org/all/20240719174140.47a868e6@kernel.org/ CC: Akinobu Mita Suggested-by: Jakub Kicinski Signed-off-by: Breno Leitao Reviewed-by: Akinobu Mita Acked-by: Paolo Abeni Acked-by: Guillaume Nault Link: https://patch.msgid.link/20241107-fault_v6-v6-1-1b82cb6ecacd@debian.org Signed-off-by: Paolo Abeni

rtnetlink: Add ASSERT_RTNL_NET() placeholder for netdev notifier.

2024-10-08T13:16:59Z

The global and per-netns netdev notifier depend on RTNL, and its dependency is not so clear due to nested calls. Let's add a placeholder to place ASSERT_RTNL_NET() for each event. Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Signed-off-by: Paolo Abeni

netdev: support binding dma-buf to netdevice

2024-09-12T03:44:31Z

Add a netdev_dmabuf_binding struct which represents the dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to rx queues on the netdevice. On the binding, the dma_buf_attach & dma_buf_map_attachment will occur. The entries in the sg_table from mapping will be inserted into a genpool to make it ready for allocation. The chunks in the genpool are owned by a dmabuf_chunk_owner struct which holds the dma-buf offset of the base of the chunk and the dma_addr of the chunk. Both are needed to use allocations that come from this chunk. We create a new type that represents an allocation from the genpool: net_iov. We setup the net_iov allocation size in the genpool to PAGE_SIZE for simplicity: to match the PAGE_SIZE normally allocated by the page pool and given to the drivers. The user can unbind the dmabuf from the netdevice by closing the netlink socket that established the binding. We do this so that the binding is automatically unbound even if the userspace process crashes. The binding and unbinding leaves an indicator in struct netdev_rx_queue that the given queue is bound, and the binding is actuated by resetting the rx queue using the queue API. The netdev_dmabuf_binding struct is refcounted, and releases its resources only when all the refs are released. Signed-off-by: Willem de Bruijn Signed-off-by: Kaiyuan Zhang Signed-off-by: Mina Almasry Reviewed-by: Pavel Begunkov # excluding netlink Acked-by: Daniel Vetter Reviewed-by: Jakub Kicinski Link: https://patch.msgid.link/20240910171458.219195-4-almasrymina@google.com Signed-off-by: Jakub Kicinski

netdev: add netdev_rx_queue_restart()

2024-09-12T03:44:30Z

Add netdev_rx_queue_restart(), which resets an rx queue using the queue API recently merged[1]. The queue API was merged to enable the core net stack to reset individual rx queues to actuate changes in the rx queue's configuration. In later patches in this series, we will use netdev_rx_queue_restart() to reset rx queues after binding or unbinding dmabuf configuration, which will cause reallocation of the page_pool to repopulate its memory using the new configuration. [1] https://lore.kernel.org/netdev/20240430231420.699177-1-shailend@google.com/T/ Signed-off-by: David Wei Signed-off-by: Mina Almasry Reviewed-by: Pavel Begunkov Reviewed-by: Jakub Kicinski Link: https://patch.msgid.link/20240910171458.219195-2-almasrymina@google.com Signed-off-by: Jakub Kicinski

net: add IEEE 802.1q specific helpers

2024-05-08T09:35:09Z

IEEE 802.1q specification provides recommendation and examples which can be used as good default values for different drivers. This patch implements mapping examples documented in IEEE 802.1Q-2022 in Annex I "I.3 Traffic type to traffic class mapping" and IETF DSCP naming and mapping DSCP to Traffic Type inspired by RFC8325. This helpers will be used in followup patches for dsa/microchip DCB implementation. Signed-off-by: Oleksij Rempel Signed-off-by: David S. Miller

net: net_test: add tests for IP tunnel flags conversion helpers

2024-04-01T09:49:28Z

Now that there are helpers for converting IP tunnel flags between the old __be16 format and the bitmap format, make sure they work as expected by adding a couple of tests to the networking testing suite. The helpers are all inline, so no dependencies on the related CONFIG_* (or a standalone module) are needed. Cover three possible cases: 1. No bits past BIT(15) are set, VTI/SIT bits are not set. This conversion is almost a direct assignment. 2. No bits past BIT(15) are set, but VTI/SIT bit is set. During the conversion, it must be transformed into BIT(16) in the bitmap, but still compatible with the __be16 format. 3. The bitmap has bits past BIT(15) set (not the VTI/SIT one). The result will be truncated. Note that currently __IP_TUNNEL_FLAG_NUM is 17 (incl. special), which means that the result of this case is currently semi-false-positive. When BIT(17) is finally here, it will be adjusted accordingly. Signed-off-by: Alexander Lobakin Signed-off-by: David S. Miller

net: introduce struct net_hotdata

2024-03-08T05:12:41Z

Instead of spreading networking critical fields all over the places, add a custom net_hotdata structure so that we can precisely control its layout. In this first patch, move : - gro_normal_batch used in rx (GRO stack) - offload_base used in rx and tx (GRO and TSO stacks) Signed-off-by: Eric Dumazet Acked-by: Soheil Hassas Yeganeh Reviewed-by: David Ahern Link: https://lore.kernel.org/r/20240306160031.874438-2-edumazet@google.com Signed-off-by: Jakub Kicinski

net: page_pool: id the page pools

2023-11-28T14:48:39Z

To give ourselves the flexibility of creating netlink commands and ability to refer to page pool instances in uAPIs create IDs for page pools. Reviewed-by: Ilias Apalodimas Reviewed-by: Eric Dumazet Acked-by: Jesper Dangaard Brouer Signed-off-by: Jakub Kicinski Reviewed-by: Shakeel Butt Signed-off-by: Paolo Abeni

net: add skb_segment kunit test

2023-10-11T09:39:01Z

Add unit testing for skb segment. This function is exercised by many different code paths, such as GSO_PARTIAL or GSO_BY_FRAGS, linear (with or without head_frag), frags or frag_list skbs, etc. It is infeasible to manually run tests that cover all code paths when making changes. The long and complex function also makes it hard to establish through analysis alone that a patch has no unintended side-effects. Add code coverage through kunit regression testing. Introduce kunit infrastructure for tests under net/core, and add this first test. This first skb_segment test exercises a simple case: a linear skb. Follow-on patches will parametrize the test and add more variants. Tested: Built and ran the test with make ARCH=um mrproper ./tools/testing/kunit/kunit.py run \ --kconfig_add CONFIG_NET=y \ --kconfig_add CONFIG_DEBUG_KERNEL=y \ --kconfig_add CONFIG_DEBUG_INFO=y \ --kconfig_add=CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y \ net_core_gso Signed-off-by: Willem de Bruijn Reviewed-by: Florian Westphal Signed-off-by: David S. Miller

net: move gso declarations and functions to their own files

2023-06-10T07:11:41Z

Move declarations into include/net/gso.h and code into net/core/gso.c Signed-off-by: Eric Dumazet Cc: Stanislav Fomichev Reviewed-by: Simon Horman Reviewed-by: David Ahern Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.com Signed-off-by: Jakub Kicinski