blaster4385/linux-IllusionX/drivers, branch v6.12.10

drivers/firmware: skip simpledrm if nvidia-drm.modeset=1 is set

2025-01-21T05:33:13Z

The Nvidia proprietary driver has some bugs that leads to issues if used with the simpledrm driver. The most noticeable is that does not register an emulated fbdev device. It just relies on a fbdev to be registered by another driver, that could be that could be attached to the framebuffer console. On UEFI machines, this is the efifb driver. This means that disabling the efifb driver will cause virtual consoles to not be present in the system when using the Nvidia driver. Legacy BIOS is not affected just because fbcon is not used there, but instead vgacon. Unless a VGA mode is specified using the vga= kernel command line option, in that case the vesafb driver is used instead and its fbdev attached to the fbcon. This is a problem because with CONFIG_SYSFB_SIMPLEFB=y, the sysfb platform code attempts to register a "simple-framebuffer" platform device (that is matched against simpledrm) and only registers either an "efi-framebuffer" or "vesa-framebuffer" if this fails to be registered due the video modes not being compatible. The Nvidia driver relying on another driver to register the fbdev is quite fragile, since it can't really assume those will stick around. For example there are patches posted to remove the EFI and VESA platform devices once a real DRM or fbdev driver probes. But in any case, moving to a simpledrm + emulated fbdev only breaks this assumption and causes users to not have VT if the Nvidia driver is used. So to prevent this, let's add a workaround and make the sysfb to skip the "simple-framebuffer" registration when nvidia-drm.modeset=1 option is set. This is quite horrible, but honestly I can't think of any other approach. For this to work, the CONFIG_FB_EFI and CONFIG_FB_VESA config options must be enabled besides CONFIG_DRM_SIMPLEDRM. Signed-off-by: Javier Martinez Canillas Cherry-picked-for: https://bugs.archlinux.org/task/73720 Cherry-picked-for: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/94

iio: imu: inv_icm42600: fix spi burst write not supported

2025-01-17T12:41:00Z

commit c0f866de4ce447bca3191b9cefac60c4b36a7922 upstream. Burst write with SPI is not working for all icm42600 chips. It was only used for setting user offsets with regmap_bulk_write. Add specific SPI regmap config for using only single write with SPI. Fixes: 9f9ff91b775b ("iio: imu: inv_icm42600: add SPI driver for inv_icm42600 driver") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://patch.msgid.link/20241112-inv-icm42600-fix-spi-burst-write-not-supported-v2-1-97690dc03607@tdk.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

drm/mediatek: Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported

2025-01-17T12:40:59Z

[ Upstream commit f8d9b91739e1fb436447c437a346a36deb676a36 ] Touching DISP_REG_OVL_PITCH_MSB leads to video overlay on MT2701, MT7623N and probably other older SoCs being broken. Move setting up AFBC layer configuration into a separate function only being called on hardware which actually supports AFBC which restores the behavior as it was before commit c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM driver") on non-AFBC hardware. Fixes: c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM driver") Cc: stable@vger.kernel.org Signed-off-by: Daniel Golle Reviewed-by: CK Hu Link: https://patchwork.kernel.org/project/dri-devel/patch/c7fbd3c3e633c0b7dd6d1cd78ccbdded31e1ca0f.1734397800.git.daniel@makrotopia.org/ Signed-off-by: Chun-Kuang Hu Signed-off-by: Sasha Levin

hwmon: (drivetemp) Fix driver producing garbage data when SCSI errors occur

2025-01-17T12:40:59Z

[ Upstream commit 82163d63ae7a4c36142cd252388737205bb7e4b9 ] scsi_execute_cmd() function can return both negative (linux codes) and positive (scsi_cmnd result field) error codes. Currently the driver just passes error codes of scsi_execute_cmd() to hwmon core, which is incorrect because hwmon only checks for negative error codes. This leads to hwmon reporting uninitialized data to userspace in case of SCSI errors (for example if the disk drive was disconnected). This patch checks scsi_execute_cmd() output and returns -EIO if it's error code is positive. Fixes: 5b46903d8bf37 ("hwmon: Driver for disk and solid state drives with temperature sensors") Signed-off-by: Daniil Stas Cc: Guenter Roeck Cc: Chris Healy Cc: Linus Walleij Cc: Martin K. Petersen Cc: Bart Van Assche Cc: linux-kernel@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-hwmon@vger.kernel.org Link: https://lore.kernel.org/r/20250105213618.531691-1-daniil.stas@posteo.net [groeck: Avoid inline variable declaration for portability] Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

iio: adc: ad7124: Disable all channels at probe time

2025-01-17T12:40:58Z

commit 4be339af334c283a1a1af3cb28e7e448a0aa8a7c upstream. When during a measurement two channels are enabled, two measurements are done that are reported sequencially in the DATA register. As the code triggered by reading one of the sysfs properties expects that only one channel is enabled it only reads the first data set which might or might not belong to the intended channel. To prevent this situation disable all channels during probe. This fixes a problem in practise because the reset default for channel 0 is enabled. So all measurements before the first measurement on channel 0 (which disables channel 0 at the end) might report wrong values. Fixes: 7b8d045e497a ("iio: adc: ad7124: allow more than 8 channels") Reviewed-by: Nuno Sa Signed-off-by: Uwe Kleine-König Link: https://patch.msgid.link/20241104101905.845737-2-u.kleine-koenig@baylibre.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: ad7173: fix using shared static info struct

2025-01-17T12:40:58Z

commit 36a44e05cd807a54e5ffad4b96d0d67f68ad8576 upstream. Fix a possible race condition during driver probe in the ad7173 driver due to using a shared static info struct. If more that one instance of the driver is probed at the same time, some of the info could be overwritten by the other instance, leading to incorrect operation. To fix this, make the static info struct const so that it is read-only and make a copy of the info struct for each instance of the driver that can be modified. Reported-by: Uwe Kleine-König Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver") Signed-off-by: David Lechner Tested-by: Guillaume Ranquet Link: https://patch.msgid.link/20241127-iio-adc-ad7313-fix-non-const-info-struct-v2-1-b6d7022b7466@baylibre.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: inkern: call iio_device_put() only on mapped devices

2025-01-17T12:40:58Z

commit 64f43895b4457532a3cc524ab250b7a30739a1b1 upstream. In the error path of iio_channel_get_all(), iio_device_put() is called on all IIO devices, which can cause a refcount imbalance. Fix this error by calling iio_device_put() only on IIO devices whose refcounts were previously incremented by iio_device_get(). Fixes: 314be14bb893 ("iio: Rename _st_ functions to loose the bit that meant the staging version.") Signed-off-by: Joe Hattori Link: https://patch.msgid.link/20241204111342.1246706-1-joe@pf.is.s.u-tokyo.ac.jp Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: at91: call input_free_device() on allocated iio_dev

2025-01-17T12:40:57Z

commit de6a73bad1743e9e81ea5a24c178c67429ff510b upstream. Current implementation of at91_ts_register() calls input_free_deivce() on st->ts_input, however, the err label can be reached before the allocated iio_dev is stored to st->ts_input. Thus call input_free_device() on input instead of st->ts_input. Fixes: 84882b060301 ("iio: adc: at91_adc: Add support for touchscreens without TSMR") Signed-off-by: Joe Hattori Link: https://patch.msgid.link/20241207043045.1255409-1-joe@pf.is.s.u-tokyo.ac.jp Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()

2025-01-17T12:40:57Z

commit 2a8e34096ec70d73ebb6d9920688ea312700cbd9 upstream. Using gpiod_set_value() to control the reset GPIO causes some verbose warnings during boot when the reset GPIO is controlled by an I2C IO expander. As the caller can sleep, use the gpiod_set_value_cansleep() variant to fix the issue. Tested on a custom i.MX93 board with a ADS124S08 ADC. Cc: stable@kernel.org Fixes: e717f8c6dfec ("iio: adc: Add the TI ads124s08 ADC code") Signed-off-by: Fabio Estevam Link: https://patch.msgid.link/20241122164308.390340-1-festevam@gmail.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: imu: inv_icm42600: fix timestamps after suspend if sensor is on

2025-01-17T12:40:57Z

commit 65a60a590142c54a3f3be11ff162db2d5b0e1e06 upstream. Currently suspending while sensors are one will result in timestamping continuing without gap at resume. It can work with monotonic clock but not with other clocks. Fix that by resetting timestamping. Fixes: ec74ae9fd37c ("iio: imu: inv_icm42600: add accurate timestamping") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://patch.msgid.link/20241113-inv_icm42600-fix-timestamps-after-suspend-v1-1-dfc77c394173@tdk.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman