blaster4385/linux-IllusionX/drivers/xen, branch v6.12.1

xen: Remove dependency between pciback and privcmd

2024-10-18T09:59:04Z

Commit 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev") adds a weak reverse dependency to the config XEN_PRIVCMD definition, that dependency causes xen-privcmd can't be loaded on domU, because dependent xen-pciback isn't always be loaded successfully on domU. To solve above problem, remove that dependency, and do not call pcistub_get_gsi_from_sbdf() directly, instead add a hook in drivers/xen/apci.c, xen-pciback register the real call function, then in privcmd_ioctl_pcidev_get_gsi call that hook. Fixes: 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev") Reported-by: Marek Marczykowski-Górecki Signed-off-by: Jiqian Chen Reviewed-by: Juergen Gross Message-ID: <20241012084537.1543059-1-Jiqian.Chen@amd.com> Signed-off-by: Juergen Gross

xen: Fix config option reference in XEN_PRIVCMD definition

2024-10-02T14:14:30Z

Commit 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev") adds a weak reverse dependency to the config XEN_PRIVCMD definition, referring to CONFIG_XEN_PCIDEV_BACKEND. In Kconfig files, one refers to config options without the CONFIG prefix, though. So in its current form, this does not create the reverse dependency as intended, but is an attribute with no effect. Refer to the intended config option XEN_PCIDEV_BACKEND in the XEN_PRIVCMD definition. Fixes: 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev") Signed-off-by: Lukas Bulwahn Reviewed-by: Juergen Gross Message-ID: <20240930090650.429813-1-lukas.bulwahn@redhat.com> Signed-off-by: Juergen Gross

Merge tag 'for-linus-6.12-rc1a-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2024-09-27T16:55:30Z

Pull more xen updates from Juergen Gross: "A second round of Xen related changes and features: - a small fix of the xen-pciback driver for a warning issued by sparse - support PCI passthrough when using a PVH dom0 - enable loading the kernel in PVH mode at arbitrary addresses, avoiding conflicts with the memory map when running as a Xen dom0 using the host memory layout" * tag 'for-linus-6.12-rc1a-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/pvh: Add 64bit relocation page tables x86/kernel: Move page table macros to header x86/pvh: Set phys_base when calling xen_prepare_pvh() x86/pvh: Make PVH entrypoint PIC for x86-64 xen: sync elfnote.h from xen tree xen/pciback: fix cast to restricted pci_ers_result_t and pci_power_t xen/privcmd: Add new syscall to get gsi from dev xen/pvh: Setup gsi for passthrough device xen/pci: Add a function to reset device for xen

[tree-wide] finally take no_llseek out

2024-09-27T15:18:43Z

no_llseek had been defined to NULL two years ago, in commit 868941b14441 ("fs: remove no_llseek") To quote that commit, At -rc1 we'll need do a mechanical removal of no_llseek - git grep -l -w no_llseek | grep -v porting.rst | while read i; do sed -i '/\/d' $i done would do it. Unfortunately, that hadn't been done. Linus, could you do that now, so that we could finally put that thing to rest? All instances are of the form .llseek = no_llseek, so it's obviously safe. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds

xen/pciback: fix cast to restricted pci_ers_result_t and pci_power_t

2024-09-25T09:31:09Z

This patch fix the following sparse warning by applying __force cast to pci_ers_result_t and pci_power_t. drivers/xen/xen-pciback/pci_stub.c:760:16: sparse: warning: cast to restricted pci_ers_result_t drivers/xen/xen-pciback/conf_space_capability.c:125:22: sparse: warning: cast to restricted pci_power_t No functional changes intended. Signed-off-by: Min-Hua Chen Reviewed-by: Juergen Gross Message-ID: <20240917233653.61630-1-minhuadotchen@gmail.com> Signed-off-by: Juergen Gross

xen/privcmd: Add new syscall to get gsi from dev

2024-09-25T07:54:55Z

On PVH dom0, when passthrough a device to domU, QEMU and xl tools want to use gsi number to do pirq mapping, see QEMU code xen_pt_realize->xc_physdev_map_pirq, and xl code pci_add_dm_done->xc_physdev_map_pirq, but in current codes, the gsi number is got from file /sys/bus/pci/devices//irq, that is wrong, because irq is not equal with gsi, they are in different spaces, so pirq mapping fails. And in current linux codes, there is no method to get gsi for userspace. For above purpose, record gsi of pcistub devices when init pcistub and add a new syscall into privcmd to let userspace can get gsi when they have a need. Signed-off-by: Jiqian Chen Signed-off-by: Huang Rui Signed-off-by: Jiqian Chen Reviewed-by: Stefano Stabellini Message-ID: <20240924061437.2636766-4-Jiqian.Chen@amd.com> Signed-off-by: Juergen Gross

xen/pvh: Setup gsi for passthrough device

2024-09-25T07:54:52Z

In PVH dom0, the gsis don't get registered, but the gsi of a passthrough device must be configured for it to be able to be mapped into a domU. When assigning a device to passthrough, proactively setup the gsi of the device during that process. Signed-off-by: Jiqian Chen Signed-off-by: Huang Rui Signed-off-by: Jiqian Chen Reviewed-by: Stefano Stabellini Message-ID: <20240924061437.2636766-3-Jiqian.Chen@amd.com> Signed-off-by: Juergen Gross

xen/pci: Add a function to reset device for xen

2024-09-25T07:54:40Z

When device on dom0 side has been reset, the vpci on Xen side won't get notification, so that the cached state in vpci is all out of date with the real device state. To solve that problem, add a new function to clear all vpci device state when device is reset on dom0 side. And call that function in pcistub_init_device. Because when using "pci-assignable-add" to assign a passthrough device in Xen, it will reset passthrough device and the vpci state will out of date, and then device will fail to restore bar state. Signed-off-by: Jiqian Chen Signed-off-by: Huang Rui Signed-off-by: Jiqian Chen Reviewed-by: Stefano Stabellini Message-ID: <20240924061437.2636766-2-Jiqian.Chen@amd.com> Signed-off-by: Juergen Gross

Merge tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2024-09-23T16:35:36Z

Pull 'struct fd' updates from Al Viro: "Just the 'struct fd' layout change, with conversion to accessor helpers" * tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: add struct fd constructors, get rid of __to_fd() struct fd: representation change introduce fd_file(), convert all accessors to it.

Merge tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping

2024-09-19T09:12:49Z

Pull dma-mapping updates from Christoph Hellwig: - support DMA zones for arm64 systems where memory starts at > 4GB (Baruch Siach, Catalin Marinas) - support direct calls into dma-iommu and thus obsolete dma_map_ops for many common configurations (Leon Romanovsky) - add DMA-API tracing (Sean Anderson) - remove the not very useful return value from various dma_set_* APIs (Christoph Hellwig) - misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph Hellwig) * tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: reflow dma_supported dma-mapping: reliably inform about DMA support for IOMMU dma-mapping: add tracing for dma-mapping API calls dma-mapping: use IOMMU DMA calls for common alloc/free page calls dma-direct: optimize page freeing when it is not addressable dma-mapping: clearly mark DMA ops as an architecture feature vdpa_sim: don't select DMA_OPS arm64: mm: keep low RAM dma zone dma-mapping: don't return errors from dma_set_max_seg_size dma-mapping: don't return errors from dma_set_seg_boundary dma-mapping: don't return errors from dma_set_min_align_mask scsi: check that busses support the DMA API before setting dma parameters arm64: mm: fix DMA zone when dma-ranges is missing dma-mapping: direct calls for dma-iommu dma-mapping: call ->unmap_page and ->unmap_sg unconditionally arm64: support DMA zone above 4GB dma-mapping: replace zone_dma_bits by zone_dma_limit dma-mapping: use bit masking to check VM_DMA_COHERENT