blaster4385/linux-IllusionX/drivers/usb/gadget, branch v6.12.10

usb: gadget: configfs: Ignore trailing LF for user strings to cdev

2025-01-17T12:40:55Z

commit 9466545720e231fc02acd69b5f4e9138e09a26f6 upstream. Since commit c033563220e0f7a8 ("usb: gadget: configfs: Attach arbitrary strings to cdev") a user can provide extra string descriptors to a USB gadget via configfs. For "manufacturer", "product", "serialnumber", setting the string via configfs ignores a trailing LF. For the arbitrary strings the LF was not ignored. This patch ignores a trailing LF to make this consistent with the existing behavior for "manufacturer", ... string descriptors. Fixes: c033563220e0 ("usb: gadget: configfs: Attach arbitrary strings to cdev") Cc: stable Signed-off-by: Ingo Rohloff Link: https://lore.kernel.org/r/20241212154114.29295-1-ingo.rohloff@lauterbach.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_fs: Remove WARN_ON in functionfs_bind

2025-01-17T12:40:55Z

commit dfc51e48bca475bbee984e90f33fdc537ce09699 upstream. This commit addresses an issue related to below kernel panic where panic_on_warn is enabled. It is caused by the unnecessary use of WARN_ON in functionsfs_bind, which easily leads to the following scenarios. 1.adb_write in adbd 2. UDC write via configfs ================= ===================== ->usb_ffs_open_thread() ->UDC write ->open_functionfs() ->configfs_write_iter() ->adb_open() ->gadget_dev_desc_UDC_store() ->adb_write() ->usb_gadget_register_driver_owner ->driver_register() ->StartMonitor() ->bus_add_driver() ->adb_read() ->gadget_bind_driver() ->configfs_composite_bind() ->usb_add_function() ->open_functionfs() ->ffs_func_bind() ->adb_open() ->functionfs_bind() state !=FFS_ACTIVE> The adb_open, adb_read, and adb_write operations are invoked from the daemon, but trying to bind the function is a process that is invoked by UDC write through configfs, which opens up the possibility of a race condition between the two paths. In this race scenario, the kernel panic occurs due to the WARN_ON from functionfs_bind when panic_on_warn is enabled. This commit fixes the kernel panic by removing the unnecessary WARN_ON. Kernel panic - not syncing: kernel: panic_on_warn set ... [ 14.542395] Call trace: [ 14.542464] ffs_func_bind+0x1c8/0x14a8 [ 14.542468] usb_add_function+0xcc/0x1f0 [ 14.542473] configfs_composite_bind+0x468/0x588 [ 14.542478] gadget_bind_driver+0x108/0x27c [ 14.542483] really_probe+0x190/0x374 [ 14.542488] __driver_probe_device+0xa0/0x12c [ 14.542492] driver_probe_device+0x3c/0x220 [ 14.542498] __driver_attach+0x11c/0x1fc [ 14.542502] bus_for_each_dev+0x104/0x160 [ 14.542506] driver_attach+0x24/0x34 [ 14.542510] bus_add_driver+0x154/0x270 [ 14.542514] driver_register+0x68/0x104 [ 14.542518] usb_gadget_register_driver_owner+0x48/0xf4 [ 14.542523] gadget_dev_desc_UDC_store+0xf8/0x144 [ 14.542526] configfs_write_iter+0xf0/0x138 Fixes: ddf8abd25994 ("USB: f_fs: the FunctionFS driver") Cc: stable Signed-off-by: Akash M Link: https://lore.kernel.org/r/20241219125221.1679-1-akash.m5@samsung.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_uac2: Fix incorrect setting of bNumEndpoints

2025-01-17T12:40:55Z

commit 057bd54dfcf68b1f67e6dfc32a47a72e12198495 upstream. Currently afunc_bind sets std_ac_if_desc.bNumEndpoints to 1 if controls (mute/volume) are enabled. During next afunc_bind call, bNumEndpoints would be unchanged and incorrectly set to 1 even if the controls aren't enabled. Fix this by resetting the value of bNumEndpoints to 0 on every afunc_bind call. Fixes: eaf6cbe09920 ("usb: gadget: f_uac2: add volume and mute support") Cc: stable Signed-off-by: Prashanth K Link: https://lore.kernel.org/r/20241211115915.159864-1-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: midi2: Reverse-select at the right place

2025-01-17T12:40:54Z

commit 6f660ffce7c938f2a5d8473c0e0b45e4fb25ef7f upstream. We should do reverse selection of other components from CONFIG_USB_F_MIDI2 which is tristate, instead of CONFIG_USB_CONFIGFS_F_MIDI2 which is bool, for satisfying subtle module dependencies. Fixes: 8b645922b223 ("usb: gadget: Add support for USB MIDI 2.0 function driver") Cc: stable Signed-off-by: Takashi Iwai Link: https://lore.kernel.org/r/20250101131124.27599-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman

usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null

2025-01-17T12:40:53Z

commit 13014969cbf07f18d62ceea40bd8ca8ec9d36cec upstream. Considering that in some extreme cases, when performing the unbinding operation, gserial_disconnect has cleared gser->ioport, which triggers gadget reconfiguration, and then calls gs_read_complete, resulting in access to a null pointer. Therefore, ep is disabled before gserial_disconnect sets port to null to prevent this from happening. Call trace: gs_read_complete+0x58/0x240 usb_gadget_giveback_request+0x40/0x160 dwc3_remove_requests+0x170/0x484 dwc3_ep0_out_start+0xb0/0x1d4 __dwc3_gadget_start+0x25c/0x720 kretprobe_trampoline.cfi_jt+0x0/0x8 kretprobe_trampoline.cfi_jt+0x0/0x8 udc_bind_to_driver+0x1d8/0x300 usb_gadget_probe_driver+0xa8/0x1dc gadget_dev_desc_UDC_store+0x13c/0x188 configfs_write_iter+0x160/0x1f4 vfs_write+0x2d0/0x40c ksys_write+0x7c/0xf0 __arm64_sys_write+0x20/0x30 invoke_syscall+0x60/0x150 el0_svc_common+0x8c/0xf8 do_el0_svc+0x28/0xa0 el0_svc+0x24/0x84 Fixes: c1dca562be8a ("usb gadget: split out serial core") Cc: stable Suggested-by: Greg Kroah-Hartman Signed-off-by: Lianqin Hu Link: https://lore.kernel.org/r/TYUPR06MB621733B5AC690DBDF80A0DCCD2042@TYUPR06MB6217.apcprd06.prod.outlook.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer

2024-12-19T17:13:05Z

commit 4cfbca86f6a8b801f3254e0e3c8f2b1d2d64be2b upstream. Considering that in some extreme cases, when u_serial driver is accessed by multiple threads, Thread A is executing the open operation and calling the gs_open, Thread B is executing the disconnect operation and calling the gserial_disconnect function,The port->port_usb pointer will be set to NULL. E.g. Thread A Thread B gs_open() gadget_unbind_driver() gs_start_io() composite_disconnect() gs_start_rx() gserial_disconnect() ... ... spin_unlock(&port->port_lock) status = usb_ep_queue() spin_lock(&port->port_lock) spin_lock(&port->port_lock) port->port_usb = NULL gs_free_requests(port->port_usb->in) spin_unlock(&port->port_lock) Crash This causes thread A to access a null pointer (port->port_usb is null) when calling the gs_free_requests function, causing a crash. If port_usb is NULL, the release request will be skipped as it will be done by gserial_disconnect. So add a null pointer check to gs_start_io before attempting to access the value of the pointer port->port_usb. Call trace: gs_start_io+0x164/0x25c gs_open+0x108/0x13c tty_open+0x314/0x638 chrdev_open+0x1b8/0x258 do_dentry_open+0x2c4/0x700 vfs_open+0x2c/0x3c path_openat+0xa64/0xc60 do_filp_open+0xb8/0x164 do_sys_openat2+0x84/0xf0 __arm64_sys_openat+0x70/0x9c invoke_syscall+0x58/0x114 el0_svc_common+0x80/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x38/0x68 Fixes: c1dca562be8a ("usb gadget: split out serial core") Cc: stable@vger.kernel.org Suggested-by: Prashanth K Signed-off-by: Lianqin Hu Acked-by: Prashanth K Link: https://lore.kernel.org/r/TYUPR06MB62178DC3473F9E1A537DCD02D2362@TYUPR06MB6217.apcprd06.prod.outlook.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: midi2: Fix interpretation of is_midi1 bits

2024-12-19T17:13:04Z

commit 82937056967da052cbc04b4435c13db84192dc52 upstream. The UMP Function Block info m1.0 field (represented by is_midi1 sysfs entry) is an enumeration from 0 to 2, while the midi2 gadget driver incorrectly copies it to the corresponding snd_ump_block_info.flags bits as-is. This made the wrong bit flags set when m1.0 = 2. This patch corrects the wrong interpretation of is_midi1 bits. Fixes: 29ee7a4dddd5 ("usb: gadget: midi2: Add configfs support") Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai Link: https://lore.kernel.org/r/20241127070213.8232-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman

Revert "usb: gadget: composite: fix OS descriptors w_value logic"

2024-12-05T13:02:50Z

commit 51cdd69d6a857f527d6d0697a2e1f0fa8bca1005 upstream. This reverts commit ec6ce7075ef879b91a8710829016005dc8170f17. Fix installation of WinUSB driver using OS descriptors. Without the fix the drivers are not installed correctly and the property 'DeviceInterfaceGUID' is missing on host side. The original change was based on the assumption that the interface number is in the high byte of wValue but it is in the low byte, instead. Unfortunately, the fix is based on MS documentation which is also wrong. The actual USB request for OS descriptors (using USB analyzer) looks like: Offset 0 1 2 3 4 5 6 7 0x000 C1 A1 02 00 05 00 0A 00 C1: bmRequestType (device to host, vendor, interface) A1: nas magic number 0002: wValue (2: nas interface) 0005: wIndex (5: get extended property i.e. nas interface GUID) 008E: wLength (142) The fix was tested on Windows 10 and Windows 11. Cc: stable@vger.kernel.org Fixes: ec6ce7075ef8 ("usb: gadget: composite: fix OS descriptors w_value logic") Signed-off-by: Michal Vrastil Signed-off-by: Elson Roy Serrao Acked-by: Peter korsgaard Link: https://lore.kernel.org/r/20241113235433.20244-1-quic_eserrao@quicinc.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: uvc: wake pump everytime we update the free list

2024-12-05T13:02:36Z

[ Upstream commit adc292d54de9db2e6b8ecb7f81f278bbbaf713e9 ] Since the req_free list will updated if enqueuing one request was not possible it will be added back to the free list. With every available free request in the queue it is a valid case for the pump worker to use it and continue the pending bufferdata into requests for the req_ready list. Fixes: 6acba0345b68 ("usb:gadget:uvc Do not use worker thread to pump isoc usb requests") Signed-off-by: Michael Grzeschik Link: https://lore.kernel.org/r/20240403-uvc_request_length_by_interval-v7-1-e224bb1035f0@pengutronix.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

USB: gadget: dummy-hcd: Fix "task hung" problem

2024-10-17T06:45:10Z

The syzbot fuzzer has been encountering "task hung" problems ever since the dummy-hcd driver was changed to use hrtimers instead of regular timers. It turns out that the problems are caused by a subtle difference between the timer_pending() and hrtimer_active() APIs. The changeover blindly replaced the first by the second. However, timer_pending() returns True when the timer is queued but not when its callback is running, whereas hrtimer_active() returns True when the hrtimer is queued _or_ its callback is running. This difference occasionally caused dummy_urb_enqueue() to think that the callback routine had not yet started when in fact it was almost finished. As a result the hrtimer was not restarted, which made it impossible for the driver to dequeue later the URB that was just enqueued. This caused usb_kill_urb() to hang, and things got worse from there. Since hrtimers have no API for telling when they are queued and the callback isn't running, the driver must keep track of this for itself. That's what this patch does, adding a new "timer_pending" flag and setting or clearing it at the appropriate times. Reported-by: syzbot+f342ea16c9d06d80b585@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/6709234e.050a0220.3e960.0011.GAE@google.com/ Tested-by: syzbot+f342ea16c9d06d80b585@syzkaller.appspotmail.com Signed-off-by: Alan Stern Fixes: a7f3813e589f ("usb: gadget: dummy_hcd: Switch to hrtimer transfer scheduler") Cc: Marcello Sylvester Bauer Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/2dab644e-ef87-4de8-ac9a-26f100b2c609@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman