blaster4385/linux-IllusionX/drivers/usb/chipidea, branch v6.12.10

usb: chipidea: ci_hdrc_imx: decrement device's refcount in .remove() and in the error path of .probe()

2025-01-17T12:40:54Z

commit 74adad500346fb07d69af2c79acbff4adb061134 upstream. Current implementation of ci_hdrc_imx_driver does not decrement the refcount of the device obtained in usbmisc_get_init_data(). Add a put_device() call in .remove() and in .probe() before returning an error. This bug was found by an experimental static analysis tool that I am developing. Cc: stable Fixes: f40017e0f332 ("chipidea: usbmisc_imx: Add USB support for VF610 SoCs") Signed-off-by: Joe Hattori Acked-by: Peter Chen Link: https://lore.kernel.org/r/20241216015539.352579-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: handle USB Error Interrupt if IOC not set

2024-12-14T19:04:07Z

[ Upstream commit 548f48b66c0c5d4b9795a55f304b7298cde2a025 ] As per USBSTS register description about UEI: When completion of a USB transaction results in an error condition, this bit is set by the Host/Device Controller. This bit is set along with the USBINT bit, if the TD on which the error interrupt occurred also had its interrupt on complete (IOC) bit set. UI is set only when IOC set. Add checking UEI to fix miss call isr_tr_complete_handler() when IOC have not set and transfer error happen. Acked-by: Peter Chen Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20240926022906.473319-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: chipidea: udc: create bounce buffer for problem sglist entries if possible

2024-12-14T19:04:07Z

[ Upstream commit edfcc455c85ccc5855f0c329ca5a2d85cc9fc6c6 ] The chipidea controller doesn't fully support sglist, such as it can not transfer data spanned more dTDs to form a bus packet, so it can only work on very limited cases. The limitations as below: 1. the end address of the first sg buffer must be 4KB aligned. 2. the start and end address of the middle sg buffer must be 4KB aligned. 3. the start address of the first sg buffer must be 4KB aligned. However, not all the use cases violate these limitations. To make the controller compatible with most of the cases, this will try to bounce the problem sglist entries which can be found by sglist_get_invalid_entry(). Then a bounced line buffer (the size will roundup to page size) will be allocated to replace the remaining problem sg entries. The data will be copied between problem sg entries and bounce buffer according to the transfer direction. The bounce buffer will be freed when the request completed. Acked-by: Peter Chen Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20240923081203.2851768-3-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: chipidea: udc: limit usb request length to max 16KB

2024-12-14T19:04:07Z

[ Upstream commit ca8d18aa7b0f22d66a3ca9a90d8f73431b8eca89 ] To let the device controller work properly on short packet limitations, one usb request should only correspond to one dTD. Then every dTD will set IOC. In theory, each dTD support up to 20KB data transfer if the offset is 0. Due to we cannot predetermine the offset, this will limit the usb request length to max 16KB. This should be fine since most of the user transfer data based on this size policy. Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240923081203.2851768-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: chipidea: add CI_HDRC_HAS_SHORT_PKT_LIMIT flag

2024-12-14T19:04:07Z

[ Upstream commit ec841b8d73cff37f8960e209017efe1eb2fb21f2 ] Currently, the imx deivice controller has below limitations: 1. can't generate short packet interrupt if IOC not set in dTD. So if one request span more than one dTDs and only the last dTD set IOC, the usb request will pending there if no more data comes. 2. the controller can't accurately deliver data to differtent usb requests in some cases due to short packet. For example: one usb request span 3 dTDs, then if the controller received a short packet the next packet will go to 2nd dTD of current request rather than the first dTD of next request. 3. can't build a bus packet use multiple dTDs. For example: controller needs to send one packet of 512 bytes use dTD1 (200 bytes) + dTD2 (312 bytes), actually the host side will see 200 bytes short packet. Based on these limits, add CI_HDRC_HAS_SHORT_PKT_LIMIT flag and use it on imx platforms. Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240923081203.2851768-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: chipidea: npcm: Fix coding style with clarification of data type

2024-09-11T13:34:49Z

Fixed coding style issue: unsigned to unsigned int. Signed-off-by: Andreas Kühn Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240903132535.15554-1-andreas.kuehn@diekuehnen.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: npcm: Fix coding style with missing space

2024-09-03T07:53:17Z

Fixed coding style issue: added missing space. Signed-off-by: Andreas Kühn Link: https://lore.kernel.org/r/20240831193407.11302-1-andreas.kuehn@diekuehnen.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: enable suspend interrupt after usb reset

2024-09-03T07:49:29Z

Currently, suspend interrupt is enabled before pullup enable operation. This will cause a suspend interrupt assert right after pullup DP. This suspend interrupt is meaningless, so this will ignore such interrupt by enable it after usb reset completed. Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240823073832.1702135-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Use of_property_present()

2024-08-07T10:49:51Z

Use of_property_present() to test for property presence rather than of_get_property(). This is part of a larger effort to remove callers of of_get_property() and similar functions. of_get_property() leaks the DT property data pointer which is a problem for dynamically allocated nodes which may be freed. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20240731191312.1710417-18-robh@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: chipidea: ci_hdrc_tegra: Switch to RUNTIME_PM_OPS()

2024-06-27T14:07:01Z

Replace SET_RUNTIME_PM_OPS() with its modern RUNTIME_PM_OPS() alternative. The combined usage of pm_ptr() and RUNTIME_PM_OPS allows the compiler to evaluate if the runtime suspend/resume() functions are used at build time or are simply dead code. This allows removing the __maybe_unused notation from the runtime suspend/resume() functions. Signed-off-by: Fabio Estevam Link: https://lore.kernel.org/r/20240625231023.436403-2-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman