blaster4385/linux-IllusionX/drivers/soc, branch v6.12.10

soc: imx8m: Probe the SoC driver as platform driver

2024-12-14T19:03:40Z

[ Upstream commit 9cc832d37799dbea950c4c8a34721b02b8b5a8ff ] With driver_async_probe=* on kernel command line, the following trace is produced because on i.MX8M Plus hardware because the soc-imx8m.c driver calls of_clk_get_by_name() which returns -EPROBE_DEFER because the clock driver is not yet probed. This was not detected during regular testing without driver_async_probe. Convert the SoC code to platform driver and instantiate a platform device in its current device_initcall() to probe the platform driver. Rework .soc_revision callback to always return valid error code and return SoC revision via parameter. This way, if anything in the .soc_revision callback return -EPROBE_DEFER, it gets propagated to .probe and the .probe will get retried later. " ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at drivers/soc/imx/soc-imx8m.c:115 imx8mm_soc_revision+0xdc/0x180 CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-next-20240924-00002-g2062bb554dea #603 Hardware name: DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3) (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : imx8mm_soc_revision+0xdc/0x180 lr : imx8mm_soc_revision+0xd0/0x180 sp : ffff8000821fbcc0 x29: ffff8000821fbce0 x28: 0000000000000000 x27: ffff800081810120 x26: ffff8000818a9970 x25: 0000000000000006 x24: 0000000000824311 x23: ffff8000817f42c8 x22: ffff0000df8be210 x21: fffffffffffffdfb x20: ffff800082780000 x19: 0000000000000001 x18: ffffffffffffffff x17: ffff800081fff418 x16: ffff8000823e1000 x15: ffff0000c03b65e8 x14: ffff0000c00051b0 x13: ffff800082790000 x12: 0000000000000801 x11: ffff80008278ffff x10: ffff80008209d3a6 x9 : ffff80008062e95c x8 : ffff8000821fb9a0 x7 : 0000000000000000 x6 : 00000000000080e3 x5 : ffff0000df8c03d8 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : fffffffffffffdfb x0 : fffffffffffffdfb Call trace: imx8mm_soc_revision+0xdc/0x180 imx8_soc_init+0xb0/0x1e0 do_one_initcall+0x94/0x1a8 kernel_init_freeable+0x240/0x2a8 kernel_init+0x28/0x140 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- SoC: i.MX8MP revision 1.1 " Signed-off-by: Marek Vasut Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

soc: qcom: pd-mapper: Add QCM6490 PD maps

2024-12-14T19:03:39Z

[ Upstream commit 31a95fe0851afbbc697b6be96c8a81a01d65aa5f ] The QCM6490 is a variant of SC7280, with the usual set of protection domains, and hence the need for a PD-mapper. In particular USB Type-C port management and battery management is pmic_glink based. Add an entry to the kernel, to avoid the need for userspace to provide this service. Signed-off-by: Bjorn Andersson Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20241004-qcm6490-pd-mapper-v1-1-d6f4bc3bffa3@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: llcc: Use designated initializers for LLC settings

2024-12-14T19:03:38Z

[ Upstream commit 20a0a05f40faf82f64f1c2ad3e9f5006b80ca0cb ] The current way of storing the configuration is very much unmaintainable. Convert the data to use designated initializers to make it easier both to understand and add/update the slice configuration data. Signed-off-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20240910-topic-llcc_unwrap-v2-1-f0487c983373@quicinc.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()

2024-12-05T13:02:57Z

commit c9f1efabf8e3b3ff886a42669f7093789dbeca94 upstream. of_find_compatible_node() requires a call to of_node_put() when the pointer to the node is not required anymore to decrement its refcount and avoid leaking memory. Add the missing call to of_node_put() after the node has been used. Cc: stable@vger.kernel.org Fixes: e95f287deed2 ("soc: fsl: handle RCPM errata A-008646 on SoC LS1021A") Signed-off-by: Javier Carrasco Link: https://lore.kernel.org/r/20241013-rcpm-of_node_put-v1-1-9a8e55a01eae@gmail.com Signed-off-by: Christophe Leroy Signed-off-by: Greg Kroah-Hartman

soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure

2024-12-05T13:02:57Z

commit cb3daa51db819a172e9524e96e2ed96b4237e51a upstream. A kernel test robot detected a missing error code: qmc.c:1942 qmc_probe() warn: missing error code 'ret' Indeed, the error returned by platform_get_irq() is checked and the operation is aborted in case of failure but the ret error code is not set in that case. Set the ret error code. Reported-by: kernel test robot Reported-by: Dan Carpenter Closes: https://lore.kernel.org/r/202411051350.KNy6ZIWA-lkp@intel.com/ Fixes: 3178d58e0b97 ("soc: fsl: cpm1: Add support for QMC") Cc: stable@vger.kernel.org Signed-off-by: Herve Codina Link: https://lore.kernel.org/r/20241105145623.401528-1-herve.codina@bootlin.com Signed-off-by: Christophe Leroy Signed-off-by: Greg Kroah-Hartman

soc: qcom: geni-se: fix array underflow in geni_se_clk_tbl_get()

2024-12-05T13:01:26Z

[ Upstream commit 78261cb08f06c93d362cab5c5034bf5899bc7552 ] This loop is supposed to break if the frequency returned from clk_round_rate() is the same as on the previous iteration. However, that check doesn't make sense on the first iteration through the loop. It leads to reading before the start of these->clk_perf_tbl[] array. Fixes: eddac5af0654 ("soc: qcom: Add GENI based QUP Wrapper driver") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/8cd12678-f44a-4b16-a579-c8f11175ee8c@stanley.mountain Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: ti: smartreflex: Use IRQF_NO_AUTOEN flag in request_irq()

2024-12-05T13:01:25Z

[ Upstream commit 16a0a69244240cfa32c525c021c40f85e090557a ] If request_irq() fails in sr_late_init(), there is no need to enable the irq, and if it succeeds, disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Fixes: 1279ba5916f6 ("OMAP3+: SR: disable interrupt by default") Signed-off-by: Jinjie Ruan Link: https://lore.kernel.org/r/20240912034147.3014213-1-ruanjinjie@huawei.com Signed-off-by: Kevin Hilman Signed-off-by: Sasha Levin

drivers: soc: xilinx: add the missing kfree in xlnx_add_cb_for_suspend()

2024-12-05T13:01:24Z

[ Upstream commit 44ed4f90a97ff6f339e50ac01db71544e0990efc ] If we fail to allocate memory for cb_data by kmalloc, the memory allocation for eve_data is never freed, add the missing kfree() in the error handling path. Fixes: 05e5ba40ea7a ("driver: soc: xilinx: Add support of multiple callbacks for same event in event management driver") Signed-off-by: Gaosheng Cui Link: https://lore.kernel.org/r/20240706065155.452764-1-cuigaosheng1@huawei.com Signed-off-by: Michal Simek Signed-off-by: Sasha Levin

Merge tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

2024-11-04T13:23:09Z

Qualcomm driver fixes for v6.12 The Qualcomm EDAC driver's configuration of interrupts is made optional, to avoid violating security constriants on X Elite platform . The SCM drivers' detection mechanism for the presence of SHM bridge in QTEE, is corrected to handle the case where firmware successfully returns that the interface isn't supported. The GLINK driver and the PMIC GLINK interface is updated to handle buffer allocation issues during initialization of the communication channel. Allocation error handling in the socinfo dirver is corrected, and then the fix is corrected. * tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: pmic_glink: Handle GLINK intent allocation rejections rpmsg: glink: Handle rejected intent request better soc: qcom: socinfo: fix revision check in qcom_socinfo_probe() firmware: qcom: scm: Return -EOPNOTSUPP for unsupported SHM bridge enabling EDAC/qcom: Make irq configuration optional firmware: qcom: scm: fix a NULL-pointer dereference firmware: qcom: scm: suppress download mode error soc: qcom: Add check devm_kasprintf() returned value MAINTAINERS: Qualcomm SoC: Match reserved-memory bindings Link: https://lore.kernel.org/r/20241101161455.746290-1-andersson@kernel.org Signed-off-by: Arnd Bergmann

soc: qcom: pmic_glink: Handle GLINK intent allocation rejections

2024-10-24T18:03:37Z

Some versions of the pmic_glink firmware does not allow dynamic GLINK intent allocations, attempting to send a message before the firmware has allocated its receive buffers and announced these intent allocations will fail. When this happens something like this showns up in the log: pmic_glink_altmode.pmic_glink_altmode pmic_glink.altmode.0: failed to send altmode request: 0x10 (-125) pmic_glink_altmode.pmic_glink_altmode pmic_glink.altmode.0: failed to request altmode notifications: -125 ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: failed to send UCSI read request: -125 qcom_battmgr.pmic_glink_power_supply pmic_glink.power-supply.0: failed to request power notifications GLINK has been updated to distinguish between the cases where the remote is going down (-ECANCELED) and the intent allocation being rejected (-EAGAIN). Retry the send until intent buffers becomes available, or an actual error occur. To avoid infinitely waiting for the firmware in the event that this misbehaves and no intents arrive, an arbitrary 5 second timeout is used. This patch was developed with input from Chris Lew. Reported-by: Johan Hovold Closes: https://lore.kernel.org/all/Zqet8iInnDhnxkT9@hovoldconsulting.com/#t Cc: stable@vger.kernel.org # rpmsg: glink: Handle rejected intent request better Fixes: 58ef4ece1e41 ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver") Tested-by: Johan Hovold Reviewed-by: Johan Hovold Signed-off-by: Bjorn Andersson Reviewed-by: Chris Lew Link: https://lore.kernel.org/r/20241023-pmic-glink-ecancelled-v2-2-ebc268129407@oss.qualcomm.com Signed-off-by: Bjorn Andersson