blaster4385/linux-IllusionX/drivers/scsi/mpi3mr, branch v6.12.1

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2024-10-19T19:52:19Z

Pull SCSI fixes from James Bottomley: "Fixes all in drivers. The largest is the mpi3mr which corrects a phy count limit that should only apply to the controller but was being incorrectly applied to expander phys" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: core: Fix null-ptr-deref in target_alloc_device() scsi: mpi3mr: Validate SAS port assignments scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down scsi: ufs: core: Requeue aborted request scsi: ufs: core: Fix the issue of ICU failure

scsi: mpi3mr: Validate SAS port assignments

2024-10-16T02:17:17Z

A sanity check on phy_mask was added in commit 3668651def2c ("scsi: mpi3mr: Sanitise num_phys"). This causes warning messages when more than 64 phys are detected and devices connected to phys greater than 64 are dropped. The phy_mask bitmap is only needed for controller phys and not required for expander phys. Controller phys can go up to a maximum of 64 and therefore u64 is good enough to contain phy_mask bitmap. To suppress those warnings and allow devices to be discovered as before the offending commit, restrict the phy_mask setting and lowest phy setting only to the controller phys. Fixes: 3668651def2c ("scsi: mpi3mr: Sanitise num_phys") Cc: stable@vger.kernel.org Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202410051943.Mp9o5DlF-lkp@intel.com/ Reported-by: Alexander Motin Signed-off-by: Ranjan Kumar Link: https://lore.kernel.org/r/20241008074353.200379-1-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23Z

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2024-09-29T16:22:34Z

Pull more SCSI updates from James Bottomley: "These are mostly minor updates. There are two drivers (lpfc and mpi3mr) which missed the initial pull and a core change to retry a start/stop unit which affect suspend/resume" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits) scsi: lpfc: Update lpfc version to 14.4.0.5 scsi: lpfc: Support loopback tests with VMID enabled scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd() scsi: mpi3mr: Update driver version to 8.12.0.0.50 scsi: mpi3mr: Improve wait logic while controller transitions to READY state scsi: mpi3mr: Update MPI Headers to revision 34 scsi: mpi3mr: Use firmware-provided timestamp update interval scsi: mpi3mr: Enhance the Enable Controller retry logic scsi: sd: Fix off-by-one error in sd_read_block_characteristics() scsi: pm8001: Do not overwrite PCI queue mapping scsi: scsi_debug: Remove a useless memset() scsi: pmcraid: Convert comma to semicolon scsi: sd: Retry START STOP UNIT commands scsi: mpi3mr: A performance fix scsi: ufs: qcom: Update MODE_MAX cfg_bw value ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2024-09-19T09:28:51Z

Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, smartpqi, NCR5380, mac_scsi, lpfc, mpi3mr). There are no user visible core changes and a whole series of minor updates and fixes. The largest core change is probably the simplification of the workqueue allocation path" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (86 commits) scsi: smartpqi: update driver version to 2.1.30-031 scsi: smartpqi: fix volume size updates scsi: smartpqi: fix rare system hang during LUN reset scsi: smartpqi: add new controller PCI IDs scsi: smartpqi: add counter for parity write stream requests scsi: smartpqi: correct stream detection scsi: smartpqi: Add fw log to kdump scsi: bnx2fc: Remove some unused fields in struct bnx2fc_rport scsi: qla2xxx: Remove the unused 'del_list_entry' field in struct fc_port scsi: ufs: core: Remove ufshcd_urgent_bkops() scsi: core: Remove obsoleted declaration for scsi_driverbyte_string() scsi: bnx2i: Remove unused declarations scsi: core: Simplify an alloc_workqueue() invocation scsi: ufs: Simplify alloc*_workqueue() invocation scsi: stex: Simplify an alloc_ordered_workqueue() invocation scsi: scsi_transport_fc: Simplify alloc_workqueue() invocations scsi: snic: Simplify alloc_workqueue() invocations scsi: qedi: Simplify an alloc_workqueue() invocation scsi: qedf: Simplify alloc_workqueue() invocations scsi: myrs: Simplify an alloc_ordered_workqueue() invocation ...

Merge patch series "mpi3mr: Few Enhancements and minor fix"

2024-09-13T01:11:28Z

Ranjan Kumar says: Few Enhancements and minor fix of mpi3mr driver. Link: https://lore.kernel.org/r/20240905102753.105310-1-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen

scsi: mpi3mr: Update driver version to 8.12.0.0.50

2024-09-13T01:10:14Z

Update driver version to 8.12.0.0.50. Signed-off-by: Ranjan Kumar Link: https://lore.kernel.org/r/20240905102753.105310-6-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen

scsi: mpi3mr: Improve wait logic while controller transitions to READY state

2024-09-13T01:10:13Z

During controller transitioning to READY state, if the controller is found in transient states ("becoming ready" or "reset requested"), driver waits for 510 secs even if the controller transitions out of these states early. This causes an unnecessary delay of 510 secs in the overall firmware initialization sequence. Poll the controller state periodically (every 100 milliseconds) while waiting for the controller to come out of the mentioned transient states. Once the controller transits out of the transient states, come out of the wait loop. Signed-off-by: Sumit Saxena Signed-off-by: Ranjan Kumar Link: https://lore.kernel.org/r/20240905102753.105310-5-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen

scsi: mpi3mr: Update MPI Headers to revision 34

2024-09-13T01:10:13Z

Update MPI Headers to revision 34. Signed-off-by: Prayas Patel Signed-off-by: Ranjan Kumar Link: https://lore.kernel.org/r/20240905102753.105310-4-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen

scsi: mpi3mr: Use firmware-provided timestamp update interval

2024-09-13T01:10:13Z

Make driver use the timestamp update interval value provided by firmware in the driver page 1. If firmware fails to provide non-zero value, then the driver will fall back to the driver defined macro. Signed-off-by: Prayas Patel Signed-off-by: Ranjan Kumar Link: https://lore.kernel.org/r/20240905102753.105310-3-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen