blaster4385/linux-IllusionX/drivers/remoteproc, branch v6.12.10

remoteproc: qcom: pas: enable SAR2130P audio DSP support

2024-12-14T19:04:05Z

[ Upstream commit 009e288c989b3fe548a45c82da407d7bd00418a9 ] Enable support for the Audio DSP on the Qualcomm SAR2130P platform, reusing the SM8350 resources. Signed-off-by: Dmitry Baryshkov Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20241027-sar2130p-adsp-v1-3-bd204e39d24e@linaro.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

remoteproc: qcom_q6v5_pas: disable auto boot for wpss

2024-12-09T09:41:04Z

commit 8a47704d64c9afda80e7f399ba2cf898cfcc45b2 upstream. Currently, the rproc "atomic_t power" variable is incremented during: a. WPSS rproc auto boot. b. AHB power on for ath11k. During AHB power off (rmmod ath11k_ahb.ko), rproc_shutdown fails to unload the WPSS firmware because the rproc->power value is '2', causing the atomic_dec_and_test(&rproc->power) condition to fail. Consequently, during AHB power on (insmod ath11k_ahb.ko), QMI_WLANFW_HOST_CAP_REQ_V01 fails due to the host and firmware QMI states being out of sync. Fixes: 300ed425dfa9 ("remoteproc: qcom_q6v5_pas: Add SC7280 ADSP, CDSP & WPSS") Cc: stable@vger.kernel.org Signed-off-by: Balaji Pothunoori Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20241018105911.165415-1-quic_bpothuno@quicinc.com Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman

remoteproc: qcom_q6v5_mss: Re-order writes to the IMEM region

2024-12-05T13:02:26Z

[ Upstream commit 7b22b7719fc17d5979a991c918c868ab041be5c8 ] Any write access to the IMEM region when the Q6 is setting up XPU protection on it will result in a XPU violation. Fix this by ensuring IMEM writes related to the MBA post-mortem logs happen before the Q6 is brought out of reset. Fixes: 318130cc9362 ("remoteproc: qcom_q6v5_mss: Add MBA log extraction support") Signed-off-by: Sibi Sankar Reviewed-by: Douglas Anderson Tested-by: Douglas Anderson Link: https://lore.kernel.org/r/20240819073020.3291287-1-quic_sibis@quicinc.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

remoteproc: qcom: pas: add minidump_id to SM8350 resources

2024-12-05T13:02:25Z

[ Upstream commit e8983156d54f59f57e648ecd44f01c16572da842 ] Specify minidump_id for the SM8350 DSPs. It was omitted for in the original commit e8b4e9a21af7 ("remoteproc: qcom: pas: Add SM8350 PAS remoteprocs"). Fixes: e8b4e9a21af7 ("remoteproc: qcom: pas: Add SM8350 PAS remoteprocs") Signed-off-by: Dmitry Baryshkov Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20241027-sar2130p-adsp-v1-2-bd204e39d24e@linaro.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

remoteproc: qcom: adsp: Remove subdevs on the error path of adsp_probe()

2024-12-05T13:02:25Z

[ Upstream commit fe80d3205e91e36e67f4d3d6c326793298d15766 ] Current implementation of adsp_probe() in qcom_q6v5_adsp.c and does not remove the subdevs of adsp on the error path. Fix this bug by calling qcom_remove_{ssr,sysmon,pdm,smd,glink}_subdev(), and qcom_q6v5_deinit() appropriately. Fixes: dc160e449122 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver") Signed-off-by: Joe Hattori Link: https://lore.kernel.org/r/fed3df4219543d46b88bacf87990d947f3fac8d7.1731038950.git.joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

remoteproc: qcom: pas: Remove subdevs on the error path of adsp_probe()

2024-12-05T13:02:25Z

[ Upstream commit 587b67cf62a91b10a47f41c20ed8ad71db375334 ] Current implementation of adsp_probe() in qcom_q6v5_pas.c does not remove the subdevs of adsp on the error path. Fix this bug by calling qcom_remove_{ssr,sysmon,pdm,smd,glink}_subdev(), qcom_q6v5_deinit(), and adsp_unassign_memory_region() appropriately. Fixes: 4b48921a8f74 ("remoteproc: qcom: Use common SMD edge handler") Signed-off-by: Joe Hattori Link: https://lore.kernel.org/r/a1cabc64240022a7f1d5237aa2aa6f72d8fb7052.1731038950.git.joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

mailbox, remoteproc: k3-m4+: fix compile testing

2024-12-05T13:02:20Z

[ Upstream commit 9c12b96ee244b9679629ac430c375a720bfec04b ] The k3-m4 remoteproc driver was merged with incorrect dependencies. Despite multiple people trying to fix this, the version 6.12-rc2 remains broken and causes a build failure with CONFIG_TI_SCI_PROTOCOL=m when the driver is built-in. arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe': ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle' Fix the dependency again to make it work in all configurations. The 'select OMAP2PLUS_MBOX' no longer matches what the other drivers dependencies. The link failure can be avoided with a simple 'depends do, so turn that into the same 'depends' to ensure we get no circular on TI_SCI_PROTOCOL', but the extra COMPILE_TEST alternative is what we use elsehwere. On the other hand, building for OMAP2PLUS makes no sense since the hardware only exists on K3. Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem") Fixes: ba0c0cb56f22 ("remoteproc: k3-m4: use the proper dependencies") Fixes: 54595f2807d2 ("mailbox, remoteproc: omap2+: fix compile testing") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20241007132441.2732215-1-arnd@kernel.org Signed-off-by: Mathieu Poirier Signed-off-by: Sasha Levin

Merge tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox

2024-09-29T16:53:04Z

Pull mailbox updates from Jassi Brar: - fix kconfig dependencies (mhu-v3, omap2+) - use devie name instead of genereic imx_mu_chan as interrupt name (imx) - enable sa8255p and qcs8300 ipc controllers (qcom) - Fix timeout during suspend mode (bcm2835) - convert to use use of_property_match_string (mailbox) - enable mt8188 (mediatek) - use devm_clk_get_enabled helpers (spreadtrum) - fix device-id typo (rockchip) * tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: mailbox, remoteproc: omap2+: fix compile testing dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188 mailbox: Use of_property_match_string() instead of open-coding mailbox: bcm2835: Fix timeout during suspend mode mailbox: sprd: Use devm_clk_get_enabled() helpers mailbox: rockchip: fix a typo in module autoloading mailbox: imx: use device name in interrupt name mailbox: ARM_MHU_V3 should depend on ARM64

mailbox, remoteproc: omap2+: fix compile testing

2024-09-27T14:11:05Z

Selecting CONFIG_OMAP2PLUS_MBOX while compile testing causes a build failure: WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3) Selected by [m]: - TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y]) Using 'select' to force-enable another subsystem is generally a mistake and causes problems such as this one, so change the three drivers that link against this driver to use 'depends on' instead, and ensure the driver itself can be compile tested regardless of the platform. When compile-testing without CONFIG_TI_SCI_PROTOCOL=m, there is a chance for a link failure, so add a careful dependency on that. arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe': ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle' Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem") Signed-off-by: Arnd Bergmann Reviewed-by: Mathieu Poirier Reviewed-by: Andrew Davis Reviewed-by: Martyn Welch Signed-off-by: Jassi Brar

remoteproc: k3-m4: use the proper dependencies

2024-09-24T19:48:35Z

The TI_K3_M4_REMOTEPROC Kconfig entry selects OMAP2PLUS_MBOX, but that driver in turn depends on other things, which the k4-m4 driver didn't. This causes a Kconfig time warning: WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3) Selected by [m]: - TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y]) because you can't select something that is unavailable. Make the dependencies for TI_K3_M4_REMOTEPROC match those of the OMAP2PLUS_MBOX driver that it needs. Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem") Cc: Bjorn Andersson Cc: Martyn Welch Cc: Hari Nagalla Cc: Andrew Davis Cc: Mathieu Poirier Signed-off-by: Linus Torvalds