blaster4385/linux-IllusionX/drivers/pci, branch v6.12.1

Merge tag 'pci-v6.12-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2024-11-02T01:44:23Z

Pull pci fix from Bjorn Helgaas: - Enable device-specific ACS-like functionality even if the device doesn't advertise an ACS capability, which got broken when adding fancy ACS kernel parameter (Jason Gunthorpe) * tag 'pci-v6.12-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI: Fix pci_enable_acs() support for the ACS quirks

PCI: Fix pci_enable_acs() support for the ACS quirks

2024-10-29T16:35:52Z

There are ACS quirks that hijack the normal ACS processing and deliver to to special quirk code. The enable path needs to call pci_dev_specific_enable_acs() and then pci_dev_specific_acs_enabled() will report the hidden ACS state controlled by the quirk. The recent rework got this out of order and we should try to call pci_dev_specific_enable_acs() regardless of any actual ACS support in the device. As before command line parameters that effect standard PCI ACS don't interact with the quirk versions, including the new config_acs= option. Link: https://lore.kernel.org/r/0-v1-f96b686c625b+124-pci_acs_quirk_fix_jgg@nvidia.com Fixes: 47c8846a49ba ("PCI: Extend ACS configurability") Reported-by: Jiri Slaby Closes: https://lore.kernel.org/all/e89107da-ac99-4d3a-9527-a4df9986e120@kernel.org Closes: https://bugzilla.suse.com/show_bug.cgi?id=1229019 Tested-by: Steffen Dirkwinkel Signed-off-by: Jason Gunthorpe Signed-off-by: Bjorn Helgaas

Merge tag 'pci-v6.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2024-10-25T17:56:06Z

Pull pci fixes from Bjorn Helgaas: - Hold the rescan lock while adding devices to avoid race with concurrent pwrctl rescan that can lead to a crash (Bartosz Golaszewski) - Avoid binding pwrctl driver to QCom WCN wifi if the DT lacks the necessary PMU regulator descriptions (Bartosz Golaszewski) * tag 'pci-v6.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI/pwrctl: Abandon QCom WCN probe on pre-pwrseq device-trees PCI: Hold rescan lock while adding devices during host probe

PCI/pwrctl: Abandon QCom WCN probe on pre-pwrseq device-trees

2024-10-23T18:34:41Z

Old device trees for some platforms already define wifi nodes for the WCN family of chips since before power sequencing was added upstream. These nodes don't consume the regulator outputs from the PMU, and if we allow this driver to bind to one of such "incomplete" nodes, we'll see a kernel log error about the infinite probe deferral. Extend the driver by adding a platform data struct matched against the compatible. This struct contains the pwrseq target string as well as a validation function called right after entering probe(). For Qualcomm WCN models, check the existence of the regulator supply property that indicates the DT is already using power sequencing and return -ENODEV if it's not there, indicating to the driver model that the device should not be bound to the pwrctl driver. Link: https://lore.kernel.org/r/20241007092447.18616-1-brgl@bgdev.pl Fixes: 6140d185a43d ("PCI/pwrctl: Add a PCI power control driver for power sequenced devices") Reported-by: Johan Hovold Closes: https://lore.kernel.org/all/Zv565olMDDGHyYVt@hovoldconsulting.com/ Signed-off-by: Bartosz Golaszewski Signed-off-by: Bjorn Helgaas

PCI: Hold rescan lock while adding devices during host probe

2024-10-12T14:31:44Z

Since adding the PCI power control code, we may end up with a race between the pwrctl platform device rescanning the bus and host controller probe functions. The latter need to take the rescan lock when adding devices or we may end up in an undefined state having two incompletely added devices and hit the following crash when trying to remove the device over sysfs: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Call trace: __pi_strlen+0x14/0x150 kernfs_find_ns+0x80/0x13c kernfs_remove_by_name_ns+0x54/0xf0 sysfs_remove_bin_file+0x24/0x34 pci_remove_resource_files+0x3c/0x84 pci_remove_sysfs_dev_files+0x28/0x38 pci_stop_bus_device+0x8c/0xd8 pci_stop_bus_device+0x40/0xd8 pci_stop_and_remove_bus_device_locked+0x28/0x48 remove_store+0x70/0xb0 dev_attr_store+0x20/0x38 sysfs_kf_write+0x58/0x78 kernfs_fop_write_iter+0xe8/0x184 vfs_write+0x2dc/0x308 ksys_write+0x7c/0xec Fixes: 4565d2652a37 ("PCI/pwrctl: Add PCI power control core code") Link: https://lore.kernel.org/r/20241003084342.27501-1-brgl@bgdev.pl Reported-by: Konrad Dybcio Tested-by: Konrad Dybcio Signed-off-by: Bartosz Golaszewski Signed-off-by: Bjorn Helgaas Reviewed-by: Manivannan Sadhasivam

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23Z

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

Merge tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2024-09-23T19:47:06Z

Pull pci updates from Bjorn Helgaas: "Enumeration: - Wait for device readiness after reset by polling Vendor ID and looking for Configuration RRS instead of polling the Command register and looking for non-error completions, to avoid hardware retries done for RRS on non-Vendor ID reads (Bjorn Helgaas) - Rename CRS Completion Status to RRS ('Request Retry Status') to match PCIe r6.0 spec usage (Bjorn Helgaas) - Clear LBMS bit after a manual link retrain so we don't try to retrain a link when there's no downstream device anymore (Maciej W. Rozycki) - Revert to the original link speed after retraining fails instead of leaving it restricted to 2.5GT/s, so a future device has a chance to use higher speeds (Maciej W. Rozycki) - Wait for each level of downstream bus, not just the first, to become accessible before restoring devices on that bus (Ilpo Järvinen) - Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups without having to stomp on the core's pdev->dev.groups (Lukas Wunner) Driver binding: - Export pcim_request_region(), a managed counterpart of pci_request_region(), for use by drivers (Philipp Stanner) - Export pcim_iomap_region() and deprecate pcim_iomap_regions() (Philipp Stanner) - Request the PCI BAR used by xboxvideo (Philipp Stanner) - Request and map drm/ast BARs with pcim_iomap_region() (Philipp Stanner) MSI: - Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a single IRQ line and cannot set the affinity of each MSI to a specific CPU core (Marek Vasut) - Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity() implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3, mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl, xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed' warnings (Marek Vasut) Power management: - Add pwrctl support for ATH11K inside the WCN6855 package (Konrad Dybcio) PCI device hotplug: - Remove unnecessary hpc_ops struct from shpchp (ngn) - Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp (weiyufeng) Virtualization: - Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson) - Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS but does provide ACS-like features (Subramanian Ananthanarayanan) IOMMU: - Add function 0 DMA alias quirk for Glenfly Arise audio function, which uses the function 0 Requester ID (WangYuli) NPEM: - Add Native PCIe Enclosure Management (NPEM) support for sysfs control of NVMe RAID storage indicators (ok/fail/locate/ rebuild/etc) (Mariusz Tkaczyk) - Add support for the ACPI _DSM PCIe SSD status LED management, which is functionally similar to NPEM but mediated by platform firmware (Mariusz Tkaczyk) Device trees: - Drop minItems and maxItems from ranges in PCI generic host binding since host bridges may have several MMIO and I/O port apertures (Frank Li) - Add kirin, rcar-gen2, uniphier DT binding top-level constraints for clocks (Krzysztof Kozlowski) Altera PCIe controller driver: - Convert altera DT bindings from text to YAML (Matthew Gerlach) - Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same thing and is what other drivers use (Jinjie Ruan) Broadcom STB PCIe controller driver: - Add DT binding maxItems for reset controllers (Jim Quinlan) - Use the 'bridge' reset method if described in the DT (Jim Quinlan) - Use the 'swinit' reset method if described in the DT (Jim Quinlan) - Add 'has_phy' so the existence of a 'rescal' reset controller doesn't imply software control of it (Jim Quinlan) - Add support for many inbound DMA windows (Jim Quinlan) - Rename SoC 'type' to 'soc_base' express the fact that SoCs come in families of multiple similar devices (Jim Quinlan) - Add Broadcom 7712 DT description and driver support (Jim Quinlan) - Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for maintainability (Bjorn Helgaas) Freescale i.MX6 PCIe controller driver: - Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints (Richard Zhu) - Fix a code restructuring error that caused i.MX8MM and i.MX8MP Endpoints to fail to establish link (Richard Zhu) - Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing outbound alignment requirement (Richard Zhu) - Call phy_power_off() in the .probe() error path (Frank Li) - Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also supported (Frank Li) - Manage Refclk by using SoC-specific callbacks instead of switch statements (Frank Li) - Manage core reset by using SoC-specific callbacks instead of switch statements (Frank Li) - Expand comments for erratum ERR010728 workaround (Frank Li) - Use generic PHY APIs to configure mode, speed, and submode, which is harmless for devices that implement their own internal PHY management and don't set the generic imx_pcie->phy (Frank Li) - Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver Root Complex support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with fsl,lx2160ar2-pcie (Frank Li) - Add layerscape-pcie DT binding deprecated 'num-viewport' property to address a DT checker warning (Frank Li) - Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array (Frank Li) Loongson PCIe controller driver: - Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets (Huacai Chen) Marvell Aardvark PCIe controller driver: - Fix issue with emulating Configuration RRS for two-byte reads of Vendor ID; previously it only worked for four-byte reads (Bjorn Helgaas) MediaTek PCIe Gen3 controller driver: - Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC types (Lorenzo Bianconi) - Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi) - Add DT and driver support for Airoha EN7581 PCIe controller (Lorenzo Bianconi) Qualcomm PCIe controller driver: - Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan Ansari) - Add back DT 'vddpe-3v3-supply', which was incorrectly removed earlier (Johan Hovold) - Drop endpoint redundant masking of global IRQ events (Manivannan Sadhasivam) - Clarify unknown global IRQ message and only log it once to avoid a flood (Manivannan Sadhasivam) - Add 'linux,pci-domain' property to endpoint DT binding (Manivannan Sadhasivam) - Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam) - Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint controller (Manivannan Sadhasivam) - Add global SPI interrupt for PCIe link events to DT binding (Manivannan Sadhasivam) - Add global RC interrupt handler to handle 'Link up' events and automatically enumerate hot-added devices (Manivannan Sadhasivam) - Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR MMIO space (Prudhvi Yarlagadda) - Enable controller resources like PHY only after PERST# is deasserted to partially avoid the problem that the endpoint SoC crashes when accessing things when Refclk is absent (Manivannan Sadhasivam) - Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu Chinta Venkata) - Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a NULL pointer dereference (Manivannan Sadhasivam) Renesas R-Car PCIe controller driver: - Make the read-only const array 'check_addr' static (Colin Ian King) - Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding (Yoshihiro Shimoda) TI DRA7xx PCIe controller driver: - Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary handler is NULL (Siddharth Vadapalli) - Handle IRQ request errors during root port and endpoint probe (Siddharth Vadapalli) TI J721E PCIe driver: - Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable the ACSPCIE module to drive Refclk for the Endpoint (Siddharth Vadapalli) - Extract the cadence link setup from cdns_pcie_host_setup() so link setup can be done separately during resume (Thomas Richard) - Add T_PERST_CLK_US definition for the mandatory delay between Refclk becoming stable and PERST# being deasserted (Thomas Richard) - Add j721e suspend and resume support (Théo Lebrun) TI Keystone PCIe controller driver: - Fix NULL pointer checking when applying MRRS limitation quirk for AM65x SR 1.0 Errata #i2037 (Dan Carpenter) Xilinx NWL PCIe controller driver: - Fix off-by-one error in INTx IRQ handler that caused INTx interrupts to be lost or delivered as the wrong interrupt (Sean Anderson) - Rate-limit misc interrupt messages (Sean Anderson) - Turn off the clock on probe failure and device removal (Sean Anderson) - Add DT binding and driver support for enabling/disabling PHYs (Sean Anderson) - Add PCIe phy bindings for the ZCU102 (Sean Anderson) Xilinx XDMA PCIe controller driver: - Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT binding and xilinx-dma-pl driver (Thippeswamy Havalige) Miscellaneous: - Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina) - Fix minor kerneldoc issues and typos (Bjorn Helgaas) - Use PCI_DEVID() macro in aer_inject() instead of open-coding it (Jinjie Ruan) - Check pcie_find_root_port() return in x86 fixups to avoid NULL pointer dereferences (Samasth Norway Ananda) - Make pci_bus_type constant (Kunwu Chan) - Remove unused declarations of __pci_pme_wakeup() and pci_vpd_release() (Yue Haibing) - Remove any leftover .*.cmd files with make clean (zhang jiao) - Remove unused BILLION macro (zhang jiao)" * tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits) PCI: Fix typos dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again tools: PCI: Remove unused BILLION macro tools: PCI: Remove .*.cmd files with make clean PCI: Pass domain number to pci_bus_release_domain_nr() explicitly PCI: dra7xx: Fix error handling when IRQ request fails in probe PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ PCI: qcom: Add RX lane margining settings for 16.0 GT/s PCI: qcom: Add equalization settings for 16.0 GT/s PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed' PCI: qcom-ep: Enable controller resources like PHY only after refclk is available PCI: Mark Creative Labs EMU20k2 INTx masking as broken dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint dt-bindings: PCI: altera: msi: Convert to YAML PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support PCI: Rename CRS Completion Status to RRS PCI: aardvark: Correct Configuration RRS checking PCI: Wait for device readiness with Configuration RRS PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings ...

Merge branch 'pci/misc'

2024-09-19T19:25:34Z

- Check pcie_find_root_port() return in x86 fixups to avoid NULL pointer dereferences (Samasth Norway Ananda) - Make pci_bus_type constant (Kunwu Chan) - Remove unused declarations of __pci_pme_wakeup() and pci_vpd_release() (Yue Haibing) - Remove any leftover .*.cmd files with make clean (zhang jiao) * pci/misc: PCI: Fix typos PCI/VPD: Remove pci_vpd_release() unused declarations PCI/PM: Remove __pci_pme_wakeup() unused declarations PCI: Make pci_bus_type constant x86/PCI: Check pcie_find_root_port() return for NULL

Merge branch 'pci/quirks'

2024-09-19T19:25:34Z

- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS but does provide ACS-like features (Subramanian Ananthanarayanan) - Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson) * pci/quirks: PCI: Mark Creative Labs EMU20k2 INTx masking as broken PCI: Add ACS quirk for Qualcomm SA8775P

Merge branch 'pci/controller/xilinx'

2024-09-19T19:25:33Z

- Fix off-by-one error in INTx IRQ handler that caused INTx interrupts to be lost or delivered as the wrong interrupt (Sean Anderson) - Rate-limit misc interrupt messages (Sean Anderson) - Turn off the clock on probe failure and device removal (Sean Anderson) - Add DT binding and driver support for enabling/disabling PHYs (Sean Anderson) - Add PCIe phy bindings for the ZCU102 (Sean Anderson) - Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT binding and xilinx-dma-pl driver (Thippeswamy Havalige) * pci/controller/xilinx: PCI: xilinx-xdma: Add Xilinx QDMA Root Port driver dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx QDMA PCIe Root Port Bridge arm64: zynqmp: Add PCIe phys property for ZCU102 PCI: xilinx-nwl: Add PHY support dt-bindings: pci: xilinx-nwl: Add phys property PCI: xilinx-nwl: Clean up clock on probe failure/removal PCI: xilinx-nwl: Rate-limit misc interrupt messages PCI: xilinx-nwl: Fix register misspelling PCI: xilinx-nwl: Fix off-by-one in INTx IRQ handler