blaster4385/linux-IllusionX/drivers/pci/controller/dwc, branch v6.12.10

PCI: qcom: Add support for IPQ9574

2024-12-14T19:04:04Z

[ Upstream commit a63b74f2e35be3829f256922037ae5cee6bb844a ] Add the new IPQ9574 platform which is based on the Qcom IP rev. 1.27.0 and Synopsys IP rev. 5.80a. The platform itself has four PCIe Gen3 controllers: two single-lane and two dual-lane, all are based on Synopsys IP rev. 5.70a. As such, reuse all the members of 'ops_2_9_0'. Link: https://lore.kernel.org/r/20240801054803.3015572-5-quic_srichara@quicinc.com Co-developed-by: Anusha Rao Signed-off-by: Anusha Rao Signed-off-by: devi priya Signed-off-by: Sricharan Ramabadhran [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński Reviewed-by: Dmitry Baryshkov Reviewed-by: Manivannan Sadhasivam Signed-off-by: Sasha Levin

PCI: dwc: ep: Fix advertised resizable BAR size regression

2024-12-09T09:41:08Z

commit 118397c9baaac0b7ec81896f8d755d09aa82c485 upstream. The advertised resizable BAR size was fixed in commit 72e34b8593e0 ("PCI: dwc: endpoint: Fix advertised resizable BAR size"). Commit 867ab111b242 ("PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle Link Down event") was included shortly after this, and moved the code to another function. When the code was moved, this fix was mistakenly lost. According to the spec, it is illegal to not have a bit set in PCI_REBAR_CAP, and 1 MB is the smallest size allowed. So, set bit 4 in PCI_REBAR_CAP, so that we actually advertise support for a 1 MB BAR size. Fixes: 867ab111b242 ("PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle Link Down event") Link: https://lore.kernel.org/r/20241116005950.2480427-2-cassel@kernel.org Link: https://lore.kernel.org/r/20240606-pci-deinit-v1-3-4395534520dc@linaro.org Link: https://lore.kernel.org/r/20240307111520.3303774-1-cassel@kernel.org Signed-off-by: Niklas Cassel Signed-off-by: Krzysztof Wilczyński Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

PCI: keystone: Add link up check to ks_pcie_other_map_bus()

2024-12-09T09:41:07Z

commit 9e9ec8d8692a6f64d81ef67d4fb6255af6be684b upstream. K2G forwards the error triggered by a link-down state (e.g., no connected endpoint device) on the system bus for PCI configuration transactions; these errors are reported as an SError at system level, which is fatal and hangs the system. So, apply fix similar to how it was done in the DesignWare Core driver commit 15b23906347c ("PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()"). Fixes: 10a797c6e54a ("PCI: dwc: keystone: Use pci_ops for config space accessors") Link: https://lore.kernel.org/r/20240524105714.191642-3-s-vadapalli@ti.com Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Siddharth Vadapalli [kwilczynski: commit log, added tag for stable releases] Signed-off-by: Krzysztof Wilczyński Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

PCI: keystone: Set mode as Root Complex for "ti,keystone-pcie" compatible

2024-12-09T09:41:07Z

commit 5a938ed9481b0c06cb97aec45e722a80568256fd upstream. commit 23284ad677a9 ("PCI: keystone: Add support for PCIe EP in AM654x Platforms") introduced configuring "enum dw_pcie_device_mode" as part of device data ("struct ks_pcie_of_data"). However it failed to set the mode for "ti,keystone-pcie" compatible. Since the mode defaults to "DW_PCIE_UNKNOWN_TYPE", the following error message is displayed for the v3.65a controller: "INVALID device type 0" Despite the driver probing successfully, the controller may not be functional in the Root Complex mode of operation. So, set the mode as Root Complex for "ti,keystone-pcie" compatible to fix this. Fixes: 23284ad677a9 ("PCI: keystone: Add support for PCIe EP in AM654x Platforms") Link: https://lore.kernel.org/r/20240524105714.191642-2-s-vadapalli@ti.com Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Siddharth Vadapalli [kwilczynski: commit log, added tag for stable releases] Signed-off-by: Krzysztof Wilczyński Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

PCI: imx6: Fix suspend/resume support on i.MX6QDL

2024-12-09T09:41:04Z

commit 0a726f542d7c8cc0f9c5ed7df5a4bd4b59ac21b3 upstream. The suspend/resume functionality is currently broken on the i.MX6QDL platform, as documented in the NXP errata (ERR005723): https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf This patch addresses the issue by sharing most of the suspend/resume sequences used by other i.MX devices, while avoiding modifications to critical registers that disrupt the PCIe functionality. It targets the same problem as the following downstream commit: https://github.com/nxp-imx/linux-imx/commit/4e92355e1f79d225ea842511fcfd42b343b32995 Unlike the downstream commit, this patch also resets the connected PCIe device if possible. Without this reset, certain drivers, such as ath10k or iwlwifi, will crash on resume. The device reset is also done by the driver on other i.MX platforms, making this patch consistent with existing practices. Upon resuming, the kernel will hang and display an error. Here's an example of the error encountered with the ath10k driver: ath10k_pci 0000:01:00.0: Unable to change power state from D3hot to D0, device inaccessible Unhandled fault: imprecise external abort (0x1406) at 0x0106f944 Without this patch, suspend/resume will fail on i.MX6QDL devices if a PCIe device is connected. Link: https://lore.kernel.org/r/20241030103250.83640-1-eichest@gmail.com Signed-off-by: Stefan Eichenberger [kwilczynski: commit log, added tag for stable releases] Signed-off-by: Krzysztof Wilczyński Reviewed-by: Manivannan Sadhasivam Acked-by: Richard Zhu Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

PCI: qcom: Disable ASPM L0s for X1E80100

2024-12-09T09:41:04Z

commit fba6045161d686adc102b6ef71b2fd1e5f90a616 upstream. Currently, the cfg_1_9_0 which is being used for X1E80100 doesn't disable ASPM L0s. However, hardware team recommends to disable L0s as the PHY init sequence is not tuned support L0s. Hence reuse cfg_sc8280xp for X1E80100. Note that the config_sid() callback is not present in cfg_sc8280xp, don't concern about this because config_sid() callback is originally a no-op for X1E80100. Fixes: 6d0c39324c5f ("PCI: qcom: Add X1E80100 PCIe support") Link: https://lore.kernel.org/r/20241101030902.579789-5-quic_qianyu@quicinc.com Signed-off-by: Qiang Yu Signed-off-by: Krzysztof Wilczyński Reviewed-by: Dmitry Baryshkov Reviewed-by: Johan Hovold Reviewed-by: Manivannan Sadhasivam Cc: # 6.9 Signed-off-by: Greg Kroah-Hartman

PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert()

2024-12-05T13:02:23Z

[ Upstream commit 40e2125381dc11379112485e3eefdd25c6df5375 ] Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF deinit notify function pci_epc_deinit_notify() are called during the execution of pex_ep_event_pex_rst_assert() i.e., when the host has asserted PERST#. But quickly after this step, refclk will also be disabled by the host. All of the tegra194 endpoint SoCs supported as of now depend on the refclk from the host for keeping the controller operational. Due to this limitation, any access to the hardware registers in the absence of refclk will result in a whole endpoint crash. Unfortunately, most of the controller cleanups require accessing the hardware registers (like eDMA cleanup performed in dw_pcie_ep_cleanup(), etc...). So these cleanup functions can cause the crash in the endpoint SoC once host asserts PERST#. One way to address this issue is by generating the refclk in the endpoint itself and not depending on the host. But that is not always possible as some of the endpoint designs do require the endpoint to consume refclk from the host. Thus, fix this crash by moving the controller cleanups to the start of the pex_ep_event_pex_rst_deassert() function. This function is called whenever the host has deasserted PERST# and it is guaranteed that the refclk would be active at this point. So at the start of this function (after enabling resources) the controller cleanup can be performed. Once finished, rest of the code execution for PERST# deassert can continue as usual. Fixes: 473b2cf9c4d1 ("PCI: endpoint: Introduce 'epc_deinit' event and notify the EPF drivers") Fixes: 570d7715eed8 ("PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#") Link: https://lore.kernel.org/r/20240817-pci-qcom-ep-cleanup-v1-2-d6b958226559@linaro.org Signed-off-by: Manivannan Sadhasivam Signed-off-by: Krzysztof Wilczyński Cc: Jonathan Hunter Cc: Thierry Reding Cc: Vidya Sagar Cc: linux-tegra@vger.kernel.org Signed-off-by: Sasha Levin

PCI: qcom-ep: Move controller cleanups to qcom_pcie_perst_deassert()

2024-12-05T13:02:23Z

[ Upstream commit 7d7cf89b119af433354f865fc01017b9f8aa411a ] Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF deinit notify function pci_epc_deinit_notify() are called during the execution of qcom_pcie_perst_assert() i.e., when the host has asserted PERST#. But quickly after this step, refclk will also be disabled by the host. All of the Qcom endpoint SoCs supported as of now depend on the refclk from the host for keeping the controller operational. Due to this limitation, any access to the hardware registers in the absence of refclk will result in a whole endpoint crash. Unfortunately, most of the controller cleanups require accessing the hardware registers (like eDMA cleanup performed in dw_pcie_ep_cleanup(), powering down MHI EPF etc...). So these cleanup functions are currently causing the crash in the endpoint SoC once host asserts PERST#. One way to address this issue is by generating the refclk in the endpoint itself and not depending on the host. But that is not always possible as some of the endpoint designs do require the endpoint to consume refclk from the host (as I was told by the Qcom engineers). Thus, fix this crash by moving the controller cleanups to the start of the qcom_pcie_perst_deassert() function. qcom_pcie_perst_deassert() is called whenever the host has deasserted PERST# and it is guaranteed that the refclk would be active at this point. So at the start of this function (after enabling resources), the controller cleanup can be performed. Once finished, rest of the code execution for PERST# deassert can continue as usual. Fixes: 473b2cf9c4d1 ("PCI: endpoint: Introduce 'epc_deinit' event and notify the EPF drivers") Fixes: 570d7715eed8 ("PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#") Link: https://lore.kernel.org/r/20240817-pci-qcom-ep-cleanup-v1-1-d6b958226559@linaro.org Signed-off-by: Manivannan Sadhasivam Signed-off-by: Krzysztof Wilczyński Signed-off-by: Sasha Levin

PCI: qcom: Enable MSI interrupts together with Link up if 'Global IRQ' is supported

2024-12-05T13:02:22Z

[ Upstream commit ba4a2e2317b9faeca9193ed6d3193ddc3cf2aba3 ] Currently, if 'Global IRQ' is supported by the platform, only the Link up interrupt is enabled in the PARF_INT_ALL_MASK register. This masks MSIs on some platforms. The MSI bits in PARF_INT_ALL_MASK register are enabled by default in the hardware, but commit 4581403f6792 ("PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt") disabled them and enabled only the Link up interrupt. While MSI continued to work on the SM8450 platform that was used to test the offending commit, on other platforms like SM8250, X1E80100, MSIs are getting masked. And they require enabling the MSI interrupt bits in the register to unmask (enable) the MSIs. Even though the MSI interrupt enable bits in PARF_INT_ALL_MASK are described as 'diagnostic' interrupts in the internal documentation, disabling them masks MSI on these platforms. Due to this, MSIs were not reported to be received these platforms while supporting 'Global IRQ'. So, enable the MSI interrupts along with the Link up interrupt in the PARF_INT_ALL_MASK register if 'Global IRQ' is supported. This ensures that the MSIs continue to work and also the driver is able to catch the Link up interrupt for enumerating endpoint devices. Fixes: 4581403f6792 ("PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt") Closes: https://lore.kernel.org/linux-pci/9a692c98-eb0a-4d86-b642-ea655981ff53@kernel.org/ Link: https://lore.kernel.org/r/20241007051255.4378-1-manivannan.sadhasivam@linaro.org Reported-by: Konrad Dybcio Tested-by: Konrad Dybcio # SL7 Signed-off-by: Manivannan Sadhasivam Signed-off-by: Krzysztof Wilczyński Reviewed-by: Qiang Yu Signed-off-by: Sasha Levin

Merge tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2024-09-23T19:47:06Z

Pull pci updates from Bjorn Helgaas: "Enumeration: - Wait for device readiness after reset by polling Vendor ID and looking for Configuration RRS instead of polling the Command register and looking for non-error completions, to avoid hardware retries done for RRS on non-Vendor ID reads (Bjorn Helgaas) - Rename CRS Completion Status to RRS ('Request Retry Status') to match PCIe r6.0 spec usage (Bjorn Helgaas) - Clear LBMS bit after a manual link retrain so we don't try to retrain a link when there's no downstream device anymore (Maciej W. Rozycki) - Revert to the original link speed after retraining fails instead of leaving it restricted to 2.5GT/s, so a future device has a chance to use higher speeds (Maciej W. Rozycki) - Wait for each level of downstream bus, not just the first, to become accessible before restoring devices on that bus (Ilpo Järvinen) - Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups without having to stomp on the core's pdev->dev.groups (Lukas Wunner) Driver binding: - Export pcim_request_region(), a managed counterpart of pci_request_region(), for use by drivers (Philipp Stanner) - Export pcim_iomap_region() and deprecate pcim_iomap_regions() (Philipp Stanner) - Request the PCI BAR used by xboxvideo (Philipp Stanner) - Request and map drm/ast BARs with pcim_iomap_region() (Philipp Stanner) MSI: - Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a single IRQ line and cannot set the affinity of each MSI to a specific CPU core (Marek Vasut) - Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity() implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3, mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl, xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed' warnings (Marek Vasut) Power management: - Add pwrctl support for ATH11K inside the WCN6855 package (Konrad Dybcio) PCI device hotplug: - Remove unnecessary hpc_ops struct from shpchp (ngn) - Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp (weiyufeng) Virtualization: - Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson) - Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS but does provide ACS-like features (Subramanian Ananthanarayanan) IOMMU: - Add function 0 DMA alias quirk for Glenfly Arise audio function, which uses the function 0 Requester ID (WangYuli) NPEM: - Add Native PCIe Enclosure Management (NPEM) support for sysfs control of NVMe RAID storage indicators (ok/fail/locate/ rebuild/etc) (Mariusz Tkaczyk) - Add support for the ACPI _DSM PCIe SSD status LED management, which is functionally similar to NPEM but mediated by platform firmware (Mariusz Tkaczyk) Device trees: - Drop minItems and maxItems from ranges in PCI generic host binding since host bridges may have several MMIO and I/O port apertures (Frank Li) - Add kirin, rcar-gen2, uniphier DT binding top-level constraints for clocks (Krzysztof Kozlowski) Altera PCIe controller driver: - Convert altera DT bindings from text to YAML (Matthew Gerlach) - Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same thing and is what other drivers use (Jinjie Ruan) Broadcom STB PCIe controller driver: - Add DT binding maxItems for reset controllers (Jim Quinlan) - Use the 'bridge' reset method if described in the DT (Jim Quinlan) - Use the 'swinit' reset method if described in the DT (Jim Quinlan) - Add 'has_phy' so the existence of a 'rescal' reset controller doesn't imply software control of it (Jim Quinlan) - Add support for many inbound DMA windows (Jim Quinlan) - Rename SoC 'type' to 'soc_base' express the fact that SoCs come in families of multiple similar devices (Jim Quinlan) - Add Broadcom 7712 DT description and driver support (Jim Quinlan) - Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for maintainability (Bjorn Helgaas) Freescale i.MX6 PCIe controller driver: - Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints (Richard Zhu) - Fix a code restructuring error that caused i.MX8MM and i.MX8MP Endpoints to fail to establish link (Richard Zhu) - Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing outbound alignment requirement (Richard Zhu) - Call phy_power_off() in the .probe() error path (Frank Li) - Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also supported (Frank Li) - Manage Refclk by using SoC-specific callbacks instead of switch statements (Frank Li) - Manage core reset by using SoC-specific callbacks instead of switch statements (Frank Li) - Expand comments for erratum ERR010728 workaround (Frank Li) - Use generic PHY APIs to configure mode, speed, and submode, which is harmless for devices that implement their own internal PHY management and don't set the generic imx_pcie->phy (Frank Li) - Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver Root Complex support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with fsl,lx2160ar2-pcie (Frank Li) - Add layerscape-pcie DT binding deprecated 'num-viewport' property to address a DT checker warning (Frank Li) - Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array (Frank Li) Loongson PCIe controller driver: - Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets (Huacai Chen) Marvell Aardvark PCIe controller driver: - Fix issue with emulating Configuration RRS for two-byte reads of Vendor ID; previously it only worked for four-byte reads (Bjorn Helgaas) MediaTek PCIe Gen3 controller driver: - Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC types (Lorenzo Bianconi) - Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi) - Add DT and driver support for Airoha EN7581 PCIe controller (Lorenzo Bianconi) Qualcomm PCIe controller driver: - Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan Ansari) - Add back DT 'vddpe-3v3-supply', which was incorrectly removed earlier (Johan Hovold) - Drop endpoint redundant masking of global IRQ events (Manivannan Sadhasivam) - Clarify unknown global IRQ message and only log it once to avoid a flood (Manivannan Sadhasivam) - Add 'linux,pci-domain' property to endpoint DT binding (Manivannan Sadhasivam) - Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam) - Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint controller (Manivannan Sadhasivam) - Add global SPI interrupt for PCIe link events to DT binding (Manivannan Sadhasivam) - Add global RC interrupt handler to handle 'Link up' events and automatically enumerate hot-added devices (Manivannan Sadhasivam) - Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR MMIO space (Prudhvi Yarlagadda) - Enable controller resources like PHY only after PERST# is deasserted to partially avoid the problem that the endpoint SoC crashes when accessing things when Refclk is absent (Manivannan Sadhasivam) - Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu Chinta Venkata) - Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a NULL pointer dereference (Manivannan Sadhasivam) Renesas R-Car PCIe controller driver: - Make the read-only const array 'check_addr' static (Colin Ian King) - Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding (Yoshihiro Shimoda) TI DRA7xx PCIe controller driver: - Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary handler is NULL (Siddharth Vadapalli) - Handle IRQ request errors during root port and endpoint probe (Siddharth Vadapalli) TI J721E PCIe driver: - Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable the ACSPCIE module to drive Refclk for the Endpoint (Siddharth Vadapalli) - Extract the cadence link setup from cdns_pcie_host_setup() so link setup can be done separately during resume (Thomas Richard) - Add T_PERST_CLK_US definition for the mandatory delay between Refclk becoming stable and PERST# being deasserted (Thomas Richard) - Add j721e suspend and resume support (Théo Lebrun) TI Keystone PCIe controller driver: - Fix NULL pointer checking when applying MRRS limitation quirk for AM65x SR 1.0 Errata #i2037 (Dan Carpenter) Xilinx NWL PCIe controller driver: - Fix off-by-one error in INTx IRQ handler that caused INTx interrupts to be lost or delivered as the wrong interrupt (Sean Anderson) - Rate-limit misc interrupt messages (Sean Anderson) - Turn off the clock on probe failure and device removal (Sean Anderson) - Add DT binding and driver support for enabling/disabling PHYs (Sean Anderson) - Add PCIe phy bindings for the ZCU102 (Sean Anderson) Xilinx XDMA PCIe controller driver: - Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT binding and xilinx-dma-pl driver (Thippeswamy Havalige) Miscellaneous: - Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina) - Fix minor kerneldoc issues and typos (Bjorn Helgaas) - Use PCI_DEVID() macro in aer_inject() instead of open-coding it (Jinjie Ruan) - Check pcie_find_root_port() return in x86 fixups to avoid NULL pointer dereferences (Samasth Norway Ananda) - Make pci_bus_type constant (Kunwu Chan) - Remove unused declarations of __pci_pme_wakeup() and pci_vpd_release() (Yue Haibing) - Remove any leftover .*.cmd files with make clean (zhang jiao) - Remove unused BILLION macro (zhang jiao)" * tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits) PCI: Fix typos dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again tools: PCI: Remove unused BILLION macro tools: PCI: Remove .*.cmd files with make clean PCI: Pass domain number to pci_bus_release_domain_nr() explicitly PCI: dra7xx: Fix error handling when IRQ request fails in probe PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ PCI: qcom: Add RX lane margining settings for 16.0 GT/s PCI: qcom: Add equalization settings for 16.0 GT/s PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed' PCI: qcom-ep: Enable controller resources like PHY only after refclk is available PCI: Mark Creative Labs EMU20k2 INTx masking as broken dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint dt-bindings: PCI: altera: msi: Convert to YAML PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support PCI: Rename CRS Completion Status to RRS PCI: aardvark: Correct Configuration RRS checking PCI: Wait for device readiness with Configuration RRS PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings ...