blaster4385/linux-IllusionX/drivers/net/ethernet/mscc, branch v6.13

net: mscc: ocelot: fix incorrect IFH SRC_PORT field in ocelot_ifh_set_basic()

2024-12-15T21:12:58Z

Packets injected by the CPU should have a SRC_PORT field equal to the CPU port module index in the Analyzer block (ocelot->num_phys_ports). The blamed commit copied the ocelot_ifh_set_basic() call incorrectly from ocelot_xmit_common() in net/dsa/tag_ocelot.c. Instead of calling with "x", it calls with BIT_ULL(x), but the field is not a port mask, but rather a single port index. [ side note: this is the technical debt of code duplication :( ] The error used to be silent and doesn't appear to have other user-visible manifestations, but with new changes in the packing library, it now fails loudly as follows: ------------[ cut here ]------------ Cannot store 0x40 inside bits 46-43 - will truncate sja1105 spi2.0: xmit timed out WARNING: CPU: 1 PID: 102 at lib/packing.c:98 __pack+0x90/0x198 sja1105 spi2.0: timed out polling for tstamp CPU: 1 UID: 0 PID: 102 Comm: felix_xmit Tainted: G W N 6.13.0-rc1-00372-gf706b85d972d-dirty #2605 Call trace: __pack+0x90/0x198 (P) __pack+0x90/0x198 (L) packing+0x78/0x98 ocelot_ifh_set_basic+0x260/0x368 ocelot_port_inject_frame+0xa8/0x250 felix_port_deferred_xmit+0x14c/0x258 kthread_worker_fn+0x134/0x350 kthread+0x114/0x138 The code path pertains to the ocelot switchdev driver and to the felix secondary DSA tag protocol, ocelot-8021q. Here seen with ocelot-8021q. The messenger (packing) is not really to blame, so fix the original commit instead. Fixes: e1b9e80236c5 ("net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q"") Signed-off-by: Vladimir Oltean Reviewed-by: Simon Horman Link: https://patch.msgid.link/20241212165546.879567-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

net: mscc: ocelot: perform error cleanup in ocelot_hwstamp_set()

2024-12-08T01:56:46Z

An unsupported RX filter will leave the port with TX timestamping still applied as per the new request, rather than the old setting. When parsing the tx_type, don't apply it just yet, but delay that until after we've parsed the rx_filter as well (and potentially returned -ERANGE for that). Similarly, copy_to_user() may fail, which is a rare occurrence, but should still be treated by unwinding what was done. Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets") Signed-off-by: Vladimir Oltean Link: https://patch.msgid.link/20241205145519.1236778-6-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

net: mscc: ocelot: be resilient to loss of PTP packets during transmission

2024-12-08T01:56:46Z

The Felix DSA driver presents unique challenges that make the simplistic ocelot PTP TX timestamping procedure unreliable: any transmitted packet may be lost in hardware before it ever leaves our local system. This may happen because there is congestion on the DSA conduit, the switch CPU port or even user port (Qdiscs like taprio may delay packets indefinitely by design). The technical problem is that the kernel, i.e. ocelot_port_add_txtstamp_skb(), runs out of timestamp IDs eventually, because it never detects that packets are lost, and keeps the IDs of the lost packets on hold indefinitely. The manifestation of the issue once the entire timestamp ID range becomes busy looks like this in dmesg: mscc_felix 0000:00:00.5: port 0 delivering skb without TX timestamp mscc_felix 0000:00:00.5: port 1 delivering skb without TX timestamp At the surface level, we need a timeout timer so that the kernel knows a timestamp ID is available again. But there is a deeper problem with the implementation, which is the monotonically increasing ocelot_port->ts_id. In the presence of packet loss, it will be impossible to detect that and reuse one of the holes created in the range of free timestamp IDs. What we actually need is a bitmap of 63 timestamp IDs tracking which one is available. That is able to use up holes caused by packet loss, but also gives us a unique opportunity to not implement an actual timer_list for the timeout timer (very complicated in terms of locking). We could only declare a timestamp ID stale on demand (lazily), aka when there's no other timestamp ID available. There are pros and cons to this approach: the implementation is much more simple than per-packet timers would be, but most of the stale packets would be quasi-leaked - not really leaked, but blocked in driver memory, since this algorithm sees no reason to free them. An improved technique would be to check for stale timestamp IDs every time we allocate a new one. Assuming a constant flux of PTP packets, this avoids stale packets being blocked in memory, but of course, packets lost at the end of the flux are still blocked until the flux resumes (nobody left to kick them out). Since implementing per-packet timers is way too complicated, this should be good enough. Testing procedure: Persistently block traffic class 5 and try to run PTP on it: $ tc qdisc replace dev swp3 parent root taprio num_tc 8 \ map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0 sched-entry S 0xdf 100000 flags 0x2 [ 126.948141] mscc_felix 0000:00:00.5: port 3 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS $ ptp4l -i swp3 -2 -P -m --socket_priority 5 --fault_reset_interval ASAP --logSyncInterval -3 ptp4l[70.351]: port 1 (swp3): INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[70.354]: port 0 (/var/run/ptp4l): INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[70.358]: port 0 (/var/run/ptp4lro): INITIALIZING to LISTENING on INIT_COMPLETE [ 70.394583] mscc_felix 0000:00:00.5: port 3 timestamp id 0 ptp4l[70.406]: timed out while polling for tx timestamp ptp4l[70.406]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[70.406]: port 1 (swp3): send peer delay response failed ptp4l[70.407]: port 1 (swp3): clearing fault immediately ptp4l[70.952]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1 [ 71.394858] mscc_felix 0000:00:00.5: port 3 timestamp id 1 ptp4l[71.400]: timed out while polling for tx timestamp ptp4l[71.400]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[71.401]: port 1 (swp3): send peer delay response failed ptp4l[71.401]: port 1 (swp3): clearing fault immediately [ 72.393616] mscc_felix 0000:00:00.5: port 3 timestamp id 2 ptp4l[72.401]: timed out while polling for tx timestamp ptp4l[72.402]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[72.402]: port 1 (swp3): send peer delay response failed ptp4l[72.402]: port 1 (swp3): clearing fault immediately ptp4l[72.952]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1 [ 73.395291] mscc_felix 0000:00:00.5: port 3 timestamp id 3 ptp4l[73.400]: timed out while polling for tx timestamp ptp4l[73.400]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[73.400]: port 1 (swp3): send peer delay response failed ptp4l[73.400]: port 1 (swp3): clearing fault immediately [ 74.394282] mscc_felix 0000:00:00.5: port 3 timestamp id 4 ptp4l[74.400]: timed out while polling for tx timestamp ptp4l[74.401]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[74.401]: port 1 (swp3): send peer delay response failed ptp4l[74.401]: port 1 (swp3): clearing fault immediately ptp4l[74.953]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1 [ 75.396830] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 0 which seems lost [ 75.405760] mscc_felix 0000:00:00.5: port 3 timestamp id 0 ptp4l[75.410]: timed out while polling for tx timestamp ptp4l[75.411]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[75.411]: port 1 (swp3): send peer delay response failed ptp4l[75.411]: port 1 (swp3): clearing fault immediately (...) Remove the blocking condition and see that the port recovers: $ same tc command as above, but use "sched-entry S 0xff" instead $ same ptp4l command as above ptp4l[99.489]: port 1 (swp3): INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[99.490]: port 0 (/var/run/ptp4l): INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[99.492]: port 0 (/var/run/ptp4lro): INITIALIZING to LISTENING on INIT_COMPLETE [ 100.403768] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 0 which seems lost [ 100.412545] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 1 which seems lost [ 100.421283] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 2 which seems lost [ 100.430015] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 3 which seems lost [ 100.438744] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 4 which seems lost [ 100.447470] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 100.505919] mscc_felix 0000:00:00.5: port 3 timestamp id 0 ptp4l[100.963]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1 [ 101.405077] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 101.507953] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 102.405405] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 102.509391] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 103.406003] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 103.510011] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 104.405601] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 104.510624] mscc_felix 0000:00:00.5: port 3 timestamp id 0 ptp4l[104.965]: selected best master clock d858d7.fffe.00ca6d ptp4l[104.966]: port 1 (swp3): assuming the grand master role ptp4l[104.967]: port 1 (swp3): LISTENING to GRAND_MASTER on RS_GRAND_MASTER [ 105.106201] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.232420] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.359001] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.405500] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.485356] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.511220] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.610938] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.737237] mscc_felix 0000:00:00.5: port 3 timestamp id 0 (...) Notice that in this new usage pattern, a non-congested port should basically use timestamp ID 0 all the time, progressing to higher numbers only if there are unacknowledged timestamps in flight. Compare this to the old usage, where the timestamp ID used to monotonically increase modulo OCELOT_MAX_PTP_ID. In terms of implementation, this simplifies the bookkeeping of the ocelot_port :: ts_id and ptp_skbs_in_flight. Since we need to traverse the list of two-step timestampable skbs for each new packet anyway, the information can already be computed and does not need to be stored. Also, ocelot_port->tx_skbs is always accessed under the switch-wide ocelot->ts_id_lock IRQ-unsafe spinlock, so we don't need the skb queue's lock and can use the unlocked primitives safely. This problem was actually detected using the tc-taprio offload, and is causing trouble in TSN scenarios, which Felix (NXP LS1028A / VSC9959) supports but Ocelot (VSC7514) does not. Thus, I've selected the commit to blame as the one adding initial timestamping support for the Felix switch. Fixes: c0bcf537667c ("net: dsa: ocelot: add hardware timestamping support for Felix") Signed-off-by: Vladimir Oltean Link: https://patch.msgid.link/20241205145519.1236778-5-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

net: mscc: ocelot: ocelot->ts_id_lock and ocelot_port->tx_skbs.lock are IRQ-safe

2024-12-08T01:56:46Z

ocelot_get_txtstamp() is a threaded IRQ handler, requested explicitly as such by both ocelot_ptp_rdy_irq_handler() and vsc9959_irq_handler(). As such, it runs with IRQs enabled, and not in hardirq context. Thus, ocelot_port_add_txtstamp_skb() has no reason to turn off IRQs, it cannot be preempted by ocelot_get_txtstamp(). For the same reason, dev_kfree_skb_any_reason() will always evaluate as kfree_skb_reason() in this calling context, so just simplify the dev_kfree_skb_any() call to kfree_skb(). Also, ocelot_port_txtstamp_request() runs from NET_TX softirq context, not with hardirqs enabled. Thus, ocelot_get_txtstamp() which shares the ocelot_port->tx_skbs.lock lock with it, has no reason to disable hardirqs. This is part of a larger rework of the TX timestamping procedure. A logical subportion of the rework has been split into a separate change. Signed-off-by: Vladimir Oltean Link: https://patch.msgid.link/20241205145519.1236778-4-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

net: mscc: ocelot: improve handling of TX timestamp for unknown skb

2024-12-08T01:56:46Z

This condition, theoretically impossible to trigger, is not really handled well. By "continuing", we are skipping the write to SYS_PTP_NXT which advances the timestamp FIFO to the next entry. So we are reading the same FIFO entry all over again, printing stack traces and eventually killing the kernel. No real problem has been observed here. This is part of a larger rework of the timestamp IRQ procedure, with this logical change split out into a patch of its own. We will need to "goto next_ts" for other conditions as well. Fixes: 9fde506e0c53 ("net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb") Signed-off-by: Vladimir Oltean Link: https://patch.msgid.link/20241205145519.1236778-3-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

net: mscc: ocelot: fix memory leak on ocelot_port_add_txtstamp_skb()

2024-12-08T01:56:46Z

If ocelot_port_add_txtstamp_skb() fails, for example due to a full PTP timestamp FIFO, we must undo the skb_clone_sk() call with kfree_skb(). Otherwise, the reference to the skb clone is lost. Fixes: 52849bcf0029 ("net: mscc: ocelot: avoid overflowing the PTP timestamp FIFO") Signed-off-by: Vladimir Oltean Link: https://patch.msgid.link/20241205145519.1236778-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

ndo_fdb_del: Add a parameter to report whether notification was sent

2024-11-16T00:39:18Z

In a similar fashion to ndo_fdb_add, which was covered in the previous patch, add the bool *notified argument to ndo_fdb_del. Callees that send a notification on their own set the flag to true. Signed-off-by: Petr Machata Reviewed-by: Amit Cohen Reviewed-by: Nikolay Aleksandrov Link: https://patch.msgid.link/06b1acf4953ef0a5ed153ef1f32d7292044f2be6.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski

ndo_fdb_add: Add a parameter to report whether notification was sent

2024-11-16T00:39:18Z

Currently when FDB entries are added to or deleted from a VXLAN netdevice, the VXLAN driver emits one notification, including the VXLAN-specific attributes. The core however always sends a notification as well, a generic one. Thus two notifications are unnecessarily sent for these operations. A similar situation comes up with bridge driver, which also emits notifications on its own: # ip link add name vx type vxlan id 1000 dstport 4789 # bridge monitor fdb & [1] 1981693 # bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1 de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent de:ad:be:ef:13:37 dev vx self permanent In order to prevent this duplicity, add a paremeter to ndo_fdb_add, bool *notified. The flag is primed to false, and if the callee sends a notification on its own, it sets it to true, thus informing the core that it should not generate another notification. Signed-off-by: Petr Machata Reviewed-by: Amit Cohen Reviewed-by: Nikolay Aleksandrov Link: https://patch.msgid.link/cbf6ae8195e85cbf922f8058ce4eba770f3b71ed.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski

net: mscc: ocelot: allow tc-flower mirred action towards foreign interfaces

2024-10-31T00:33:55Z

Debugging certain flows in the offloaded switch data path can be done by installing two tc-mirred filters for mirroring: one in the hardware data path, which copies the frames to the CPU, and one which takes the frame from there and mirrors it to a virtual interface like a dummy device, where it can be seen with tcpdump. The effect of having 2 filters run on the same packet can be obtained by default using tc, by not specifying either the 'skip_sw' or 'skip_hw' keywords. Instead of refusing to offload mirroring/redirecting packets towards interfaces that aren't switch ports, just treat every other destination for what it is: something that is handled in software, behind the CPU port. Usage: $ ip link add dummy0 type dummy; ip link set dummy0 up $ tc qdisc add dev swp0 clsact $ tc filter add dev swp0 ingress protocol ip flower action mirred ingress mirror dev dummy0 Signed-off-by: Vladimir Oltean Link: https://patch.msgid.link/20241023135251.1752488-7-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

net: ethernet: Switch back to struct platform_driver::remove()

2024-10-04T23:39:56Z

After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/net/ethernet to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König Link: https://patch.msgid.link/18f7c585a1a8a8ac8b03a2fca7de19bd5c52ac2b.1727949050.git.u.kleine-koenig@baylibre.com Signed-off-by: Jakub Kicinski