blaster4385/linux-IllusionX/drivers/net/ethernet/microsoft, branch v6.12.1

Merge tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping

2024-09-19T09:12:49Z

Pull dma-mapping updates from Christoph Hellwig: - support DMA zones for arm64 systems where memory starts at > 4GB (Baruch Siach, Catalin Marinas) - support direct calls into dma-iommu and thus obsolete dma_map_ops for many common configurations (Leon Romanovsky) - add DMA-API tracing (Sean Anderson) - remove the not very useful return value from various dma_set_* APIs (Christoph Hellwig) - misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph Hellwig) * tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: reflow dma_supported dma-mapping: reliably inform about DMA support for IOMMU dma-mapping: add tracing for dma-mapping API calls dma-mapping: use IOMMU DMA calls for common alloc/free page calls dma-direct: optimize page freeing when it is not addressable dma-mapping: clearly mark DMA ops as an architecture feature vdpa_sim: don't select DMA_OPS arm64: mm: keep low RAM dma zone dma-mapping: don't return errors from dma_set_max_seg_size dma-mapping: don't return errors from dma_set_seg_boundary dma-mapping: don't return errors from dma_set_min_align_mask scsi: check that busses support the DMA API before setting dma parameters arm64: mm: fix DMA zone when dma-ranges is missing dma-mapping: direct calls for dma-iommu dma-mapping: call ->unmap_page and ->unmap_sg unconditionally arm64: support DMA zone above 4GB dma-mapping: replace zone_dma_bits by zone_dma_limit dma-mapping: use bit masking to check VM_DMA_COHERENT

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-09-06T03:37:20Z

Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/phy/phy_device.c 2560db6ede1a ("net: phy: Fix missing of_node_put() for leds") 1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()") https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au Adjacent changes: drivers/net/ethernet/xilinx/xilinx_axienet.h drivers/net/ethernet/xilinx/xilinx_axienet_main.c 858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop") 76abb5d675c4 ("net: xilinx: axienet: Add statistics support") Signed-off-by: Jakub Kicinski

net: mana: Improve mana_set_channels() in low mem conditions

2024-09-04T23:28:51Z

The mana_set_channels() function requires detaching the mana driver and reattaching it with changed channel values. During this operation if the system is low on memory, the reattach might fail, causing the network device being down. To avoid this we pre-allocate buffers at the beginning of set operation, to prevent complete network loss Signed-off-by: Shradha Gupta Reviewed-by: Gerhard Engleder Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/1725248734-21760-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Jakub Kicinski

net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup

2024-09-04T10:50:04Z

Currently napi_disable() gets called during rxq and txq cleanup, even before napi is enabled and hrtimer is initialized. It causes kernel panic. ? page_fault_oops+0x136/0x2b0 ? page_counter_cancel+0x2e/0x80 ? do_user_addr_fault+0x2f2/0x640 ? refill_obj_stock+0xc4/0x110 ? exc_page_fault+0x71/0x160 ? asm_exc_page_fault+0x27/0x30 ? __mmdrop+0x10/0x180 ? __mmdrop+0xec/0x180 ? hrtimer_active+0xd/0x50 hrtimer_try_to_cancel+0x2c/0xf0 hrtimer_cancel+0x15/0x30 napi_disable+0x65/0x90 mana_destroy_rxq+0x4c/0x2f0 mana_create_rxq.isra.0+0x56c/0x6d0 ? mana_uncfg_vport+0x50/0x50 mana_alloc_queues+0x21b/0x320 ? skb_dequeue+0x5f/0x80 Cc: stable@vger.kernel.org Fixes: e1b5683ff62e ("net: mana: Move NAPI from EQ to CQ") Signed-off-by: Souradeep Chakrabarti Reviewed-by: Haiyang Zhang Reviewed-by: Shradha Gupta Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-08-29T18:49:10Z

Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/faraday/ftgmac100.c 4186c8d9e6af ("net: ftgmac100: Ensure tx descriptor updates are visible") e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI") https://lore.kernel.org/0b851ec5-f91d-4dd3-99da-e81b98c9ed28@kernel.org net/ipv4/tcp.c bac76cf89816 ("tcp: fix forever orphan socket caused by tcp_abort") edefba66d929 ("tcp: rstreason: introduce SK_RST_REASON_TCP_STATE for active reset") https://lore.kernel.org/20240828112207.5c199d41@canb.auug.org.au No adjacent changes. Link: https://patch.msgid.link/20240829130829.39148-1-pabeni@redhat.com Signed-off-by: Jakub Kicinski

dma-mapping: don't return errors from dma_set_max_seg_size

2024-08-29T04:22:49Z

A NULL dev->dma_parms indicates either a bus that is not DMA capable or grave bug in the implementation of the bus code. There isn't much the driver can do in terms of error handling for either case, so just warn and continue as DMA operations will fail anyway. Signed-off-by: Christoph Hellwig Reviewed-by: Robin Murphy Reviewed-by: Martin K. Petersen Acked-by: Ulf Hansson # For MMC

net: mana: Implement get_ringparam/set_ringparam for mana

2024-08-27T23:08:44Z

Currently the values of WQs for RX and TX queues for MANA devices are hardcoded to default sizes. Allow configuring these values for MANA devices as ringparam configuration(get/set) through ethtool_ops. Pre-allocate buffers at the beginning of this operation, to prevent complete network loss in low-memory conditions. Signed-off-by: Shradha Gupta Reviewed-by: Haiyang Zhang Reviewed-by: Saurabh Sengar Link: https://patch.msgid.link/1724688461-12203-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Jakub Kicinski

net: mana: Fix race of mana_hwc_post_rx_wqe and new hwc response

2024-08-23T13:24:24Z

The mana_hwc_rx_event_handler() / mana_hwc_handle_resp() calls complete(&ctx->comp_event) before posting the wqe back. It's possible that other callers, like mana_create_txq(), start the next round of mana_hwc_send_request() before the posting of wqe. And if the HW is fast enough to respond, it can hit no_wqe error on the HW channel, then the response message is lost. The mana driver may fail to create queues and open, because of waiting for the HW response and timed out. Sample dmesg: [ 528.610840] mana 39d4:00:02.0: HWC: Request timed out! [ 528.614452] mana 39d4:00:02.0: Failed to send mana message: -110, 0x0 [ 528.618326] mana 39d4:00:02.0 enP14804s2: Failed to create WQ object: -110 To fix it, move posting of rx wqe before complete(&ctx->comp_event). Cc: stable@vger.kernel.org Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang Reviewed-by: Long Li Signed-off-by: David S. Miller

net: mana: Fix doorbell out of order violation and avoid unnecessary doorbell rings

2024-08-13T11:09:54Z

After napi_complete_done() is called when NAPI is polling in the current process context, another NAPI may be scheduled and start running in softirq on another CPU and may ring the doorbell before the current CPU does. When combined with unnecessary rings when there is no need to arm the CQ, it triggers error paths in the hardware. This patch fixes this by calling napi_complete_done() after doorbell rings. It limits the number of unnecessary rings when there is no need to arm. MANA hardware specifies that there must be one doorbell ring every 8 CQ wraparounds. This driver guarantees one doorbell ring as soon as the number of consumed CQEs exceeds 4 CQ wraparounds. In practical workloads, the 4 CQ wraparounds proves to be big enough that it rarely exceeds this limit before all the napi weight is consumed. To implement this, add a per-CQ counter cq->work_done_since_doorbell, and make sure the CQ is armed as soon as passing 4 wraparounds of the CQ. Cc: stable@vger.kernel.org Fixes: e1b5683ff62e ("net: mana: Move NAPI from EQ to CQ") Reviewed-by: Haiyang Zhang Signed-off-by: Long Li Link: https://patch.msgid.link/1723219138-29887-1-git-send-email-longli@linuxonhyperv.com Signed-off-by: Paolo Abeni

net: mana: Fix RX buf alloc_size alignment and atomic op panic

2024-08-12T12:26:35Z

The MANA driver's RX buffer alloc_size is passed into napi_build_skb() to create SKB. skb_shinfo(skb) is located at the end of skb, and its alignment is affected by the alloc_size passed into napi_build_skb(). The size needs to be aligned properly for better performance and atomic operations. Otherwise, on ARM64 CPU, for certain MTU settings like 4000, atomic operations may panic on the skb_shinfo(skb)->dataref due to alignment fault. To fix this bug, add proper alignment to the alloc_size calculation. Sample panic info: [ 253.298819] Unable to handle kernel paging request at virtual address ffff000129ba5cce [ 253.300900] Mem abort info: [ 253.301760] ESR = 0x0000000096000021 [ 253.302825] EC = 0x25: DABT (current EL), IL = 32 bits [ 253.304268] SET = 0, FnV = 0 [ 253.305172] EA = 0, S1PTW = 0 [ 253.306103] FSC = 0x21: alignment fault Call trace: __skb_clone+0xfc/0x198 skb_clone+0x78/0xe0 raw6_local_deliver+0xfc/0x228 ip6_protocol_deliver_rcu+0x80/0x500 ip6_input_finish+0x48/0x80 ip6_input+0x48/0xc0 ip6_sublist_rcv_finish+0x50/0x78 ip6_sublist_rcv+0x1cc/0x2b8 ipv6_list_rcv+0x100/0x150 __netif_receive_skb_list_core+0x180/0x220 netif_receive_skb_list_internal+0x198/0x2a8 __napi_poll+0x138/0x250 net_rx_action+0x148/0x330 handle_softirqs+0x12c/0x3a0 Cc: stable@vger.kernel.org Fixes: 80f6215b450e ("net: mana: Add support for jumbo frame") Signed-off-by: Haiyang Zhang Reviewed-by: Long Li Signed-off-by: David S. Miller