<feed xmlns='http://www.w3.org/2005/Atom'>
<title>blaster4385/linux-IllusionX/drivers/net/ethernet/amd, branch v6.12.1</title>
<subtitle>Linux kernel with personal config changes for arch linux</subtitle>
<id>http://git.tablaster.dev/blaster4385/linux-IllusionX/atom?h=v6.12.1</id>
<link rel='self' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/atom?h=v6.12.1'/>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/'/>
<updated>2024-10-09T11:45:51Z</updated>
<entry>
<title>net: amd: mvme147: Fix probe banner message</title>
<updated>2024-10-09T11:45:51Z</updated>
<author>
<name>Daniel Palmer</name>
<email>daniel@0x0f.com</email>
</author>
<published>2024-10-07T10:43:17Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=82c5b53140faf89c31ea2b3a0985a2f291694169'/>
<id>urn:sha1:82c5b53140faf89c31ea2b3a0985a2f291694169</id>
<content type='text'>
Currently this driver prints this line with what looks like
a rogue format specifier when the device is probed:
[    2.840000] eth%d: MVME147 at 0xfffe1800, irq 12, Hardware Address xx:xx:xx:xx:xx:xx

Change the printk() for netdev_info() and move it after the
registration has completed so it prints out the name of the
interface properly.

Signed-off-by: Daniel Palmer &lt;daniel@0x0f.com&gt;
Reviewed-by: Simon Horman &lt;horms@kernel.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
</entry>
<entry>
<title>amd-xgbe: Remove setting of RX software timestamp</title>
<updated>2024-09-10T00:44:40Z</updated>
<author>
<name>Gal Pressman</name>
<email>gal@nvidia.com</email>
</author>
<published>2024-09-06T14:46:20Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=18eb4d0440d8a104e8a10e032b62c3a2217b1e3a'/>
<id>urn:sha1:18eb4d0440d8a104e8a10e032b62c3a2217b1e3a</id>
<content type='text'>
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.

Reviewed-by: Carolina Jubran &lt;cjubran@nvidia.com&gt;
Reviewed-by: Rahul Rameshbabu &lt;rrameshbabu@nvidia.com&gt;
Signed-off-by: Gal Pressman &lt;gal@nvidia.com&gt;
Acked-by: Shyam Sundar S K &lt;Shyam-sundar.S-k@amd.com&gt;
Link: https://patch.msgid.link/20240906144632.404651-5-gal@nvidia.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
</entry>
<entry>
<title>pds_core: Remove redundant null pointer checks</title>
<updated>2024-09-04T23:59:01Z</updated>
<author>
<name>Li Zetao</name>
<email>lizetao1@huawei.com</email>
</author>
<published>2024-09-03T14:33:43Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=8ed6e71219a3571a5583db6f839e80eebaa2853d'/>
<id>urn:sha1:8ed6e71219a3571a5583db6f839e80eebaa2853d</id>
<content type='text'>
Since the debugfs_create_dir() never returns a null pointer, checking
the return value for a null pointer is redundant, and using IS_ERR is
safe enough.

Signed-off-by: Li Zetao &lt;lizetao1@huawei.com&gt;
Link: https://patch.msgid.link/20240903143343.2004652-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
</entry>
<entry>
<title>net: xgbe: Convert tasklet API to new bottom half workqueue mechanism</title>
<updated>2024-08-01T01:59:46Z</updated>
<author>
<name>Allen Pais</name>
<email>allen.lkml@gmail.com</email>
</author>
<published>2024-07-30T18:33:50Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=2d671dc6f069f46214d96e934e14f5952d76d92f'/>
<id>urn:sha1:2d671dc6f069f46214d96e934e14f5952d76d92f</id>
<content type='text'>
Migrate tasklet APIs to the new bottom half workqueue mechanism. It
replaces all occurrences of tasklet usage with the appropriate workqueue
APIs throughout the xgbe driver. This transition ensures compatibility
with the latest design and enhances performance.

Signed-off-by: Allen Pais &lt;allen.lkml@gmail.com&gt;
Link: https://patch.msgid.link/20240730183403.4176544-3-allen.lkml@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
</entry>
<entry>
<title>net: Add struct kernel_ethtool_ts_info</title>
<updated>2024-07-15T15:02:26Z</updated>
<author>
<name>Kory Maincent</name>
<email>kory.maincent@bootlin.com</email>
</author>
<published>2024-07-09T13:53:38Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=2111375b85ad173d58e7b8604246a3de60950ac8'/>
<id>urn:sha1:2111375b85ad173d58e7b8604246a3de60950ac8</id>
<content type='text'>
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.

Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.

Acked-by: Shannon Nelson &lt;shannon.nelson@amd.com&gt;
Acked-by: Alexandra Winter &lt;wintera@linux.ibm.com&gt;
Signed-off-by: Kory Maincent &lt;kory.maincent@bootlin.com&gt;
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
</entry>
<entry>
<title>net: amd: add missing MODULE_DESCRIPTION() macros</title>
<updated>2024-06-20T00:21:40Z</updated>
<author>
<name>Jeff Johnson</name>
<email>quic_jjohnson@quicinc.com</email>
</author>
<published>2024-06-18T17:26:20Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=deb9d5766206988e788037c43a12df892c366ad7'/>
<id>urn:sha1:deb9d5766206988e788037c43a12df892c366ad7</id>
<content type='text'>
With ARCH=m68k, make allmodconfig &amp;&amp; make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/ethernet/amd/a2065.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/ethernet/amd/ariadne.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/ethernet/amd/atarilance.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/ethernet/amd/hplance.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/ethernet/amd/7990.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/ethernet/amd/mvme147.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/ethernet/amd/sun3lance.o

Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE().

This includes drivers/net/ethernet/amd/lance.c which, although it did
not produce a warning with the m68k allmodconfig configuration, may
cause this warning with other configurations.

Signed-off-by: Jeff Johnson &lt;quic_jjohnson@quicinc.com&gt;
Reviewed-by: Simon Horman &lt;horms@kernel.org&gt;
Link: https://lore.kernel.org/r/20240618-md-m68k-drivers-net-ethernet-amd-v1-1-50ee7a9ad50e@quicinc.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
</entry>
<entry>
<title>Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci</title>
<updated>2024-05-21T17:09:28Z</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2024-05-21T17:09:28Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=f0bae243b2bcf2b160ae547463bf542762beef8f'/>
<id>urn:sha1:f0bae243b2bcf2b160ae547463bf542762beef8f</id>
<content type='text'>
Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
     since there's no requirement to describe them in E820 and some
     platforms require ECAM to work (Bjorn Helgaas)

   - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
     Le Moal)

   - Remove last user and pci_enable_device_io() (Heiner Kallweit)

   - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)

   - Skip waiting for devices that have been disconnected while
     suspended (Ilpo Järvinen)

   - Clear Secondary Status errors after enumeration since Master Aborts
     and Unsupported Request errors are an expected part of enumeration
     (Vidya Sagar)

  MSI:

   - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)

  Error handling:

   - Mask Genesys GL975x SD host controller Replay Timer Timeout
     correctable errors caused by a hardware defect; the errors cause
     interrupts that prevent system suspend (Kai-Heng Feng)

   - Fix EDR-related _DSM support, which previously evaluated revision 5
     but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)

  ASPM:

   - Simplify link state definitions and mask calculation (Ilpo
     Järvinen)

  Power management:

   - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
     apparently doesn't know how to put them back in D0 (Mario
     Limonciello)

  CXL:

   - Support resetting CXL devices; special handling required because
     CXL Ports mask Secondary Bus Reset by default (Dave Jiang)

  DOE:

   - Support DOE Discovery Version 2 (Alexey Kardashevskiy)

  Endpoint framework:

   - Set endpoint BAR to be 64-bit if the driver says that's all the
     device supports, in addition to doing so if the size is &gt;2GB
     (Niklas Cassel)

   - Simplify endpoint BAR allocation and setting interfaces (Niklas
     Cassel)

  Cadence PCIe controller driver:

   - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
     Kozlowski)

  Cadence PCIe endpoint driver:

   - Configure endpoint BARs to be 64-bit based on the BAR type, not the
     BAR value (Niklas Cassel)

  Freescale Layerscape PCIe controller driver:

   - Convert DT binding to YAML (Frank Li)

  MediaTek MT7621 PCIe controller driver:

   - Add DT binding missing 'reg' property for child Root Ports
     (Krzysztof Kozlowski)

   - Fix theoretical string truncation in PHY name (Sergio Paracuellos)

  NVIDIA Tegra194 PCIe controller driver:

   - Return success for endpoint probe instead of falling through to the
     failure path (Vidya Sagar)

  Renesas R-Car PCIe controller driver:

   - Add DT binding missing IOMMU properties (Geert Uytterhoeven)

   - Add DT binding R-Car V4H compatible for host and endpoint mode
     (Yoshihiro Shimoda)

  Rockchip PCIe controller driver:

   - Configure endpoint BARs to be 64-bit based on the BAR type, not the
     BAR value (Niklas Cassel)

   - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)

   - Set the Subsystem Vendor ID, which was previously zero because it
     was masked incorrectly (Rick Wertenbroek)

  Synopsys DesignWare PCIe controller driver:

   - Restructure DBI register access to accommodate devices where this
     requires Refclk to be active (Manivannan Sadhasivam)

   - Remove the deinit() callback, which was only need by the
     pcie-rcar-gen4, and do it directly in that driver (Manivannan
     Sadhasivam)

   - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
     up things like eDMA (Manivannan Sadhasivam)

   - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
     to dw_pcie_ep_init() (Manivannan Sadhasivam)

   - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
     reflect the actual functionality (Manivannan Sadhasivam)

   - Call dw_pcie_ep_init_registers() directly from all the glue
     drivers, not just those that require active Refclk from the host
     (Manivannan Sadhasivam)

   - Remove the "core_init_notifier" flag, which was an obscure way for
     glue drivers to indicate that they depend on Refclk from the host
     (Manivannan Sadhasivam)

  TI J721E PCIe driver:

   - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)

   - Add DT binding J722S SoC support (Siddharth Vadapalli)

  TI Keystone PCIe controller driver:

   - Add DT binding missing num-viewport, phys and phy-name properties
     (Jan Kiszka)

  Miscellaneous:

   - Constify and annotate with __ro_after_init (Heiner Kallweit)

   - Convert DT bindings to YAML (Krzysztof Kozlowski)

   - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
     Zhou)"

* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
  PCI: Do not wait for disconnected devices when resuming
  x86/pci: Skip early E820 check for ECAM region
  PCI: Remove unused pci_enable_device_io()
  ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
  PCI: Update pci_find_capability() stub return types
  PCI: Remove PCI_IRQ_LEGACY
  scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
  scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
  Revert "genirq/msi: Provide constants for PCI/IMS support"
  Revert "x86/apic/msi: Enable PCI/IMS"
  Revert "iommu/vt-d: Enable PCI/IMS"
  Revert "iommu/amd: Enable PCI/IMS"
  Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
  ...
</content>
</entry>
<entry>
<title>net: annotate data-races around dev-&gt;if_port</title>
<updated>2024-05-09T01:51:30Z</updated>
<author>
<name>Eric Dumazet</name>
<email>edumazet@google.com</email>
</author>
<published>2024-05-07T18:41:44Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=8d8b1a422c4644891e1f8a3ea10b544b65cd0cc6'/>
<id>urn:sha1:8d8b1a422c4644891e1f8a3ea10b544b65cd0cc6</id>
<content type='text'>
Various ndo_set_config() methods can change dev-&gt;if_port

dev-&gt;if_port is going to be read locklessly from
rtnl_fill_link_ifmap().

Add corresponding WRITE_ONCE() on writer sides.

Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Reviewed-by: Simon Horman &lt;horms@kernel.org&gt;
Link: https://lore.kernel.org/r/20240507184144.1230469-1-edumazet@google.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
</entry>
<entry>
<title>net: annotate writes on dev-&gt;mtu from ndo_change_mtu()</title>
<updated>2024-05-07T23:19:14Z</updated>
<author>
<name>Eric Dumazet</name>
<email>edumazet@google.com</email>
</author>
<published>2024-05-06T10:28:12Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=1eb2cded45b35816085c1f962933c187d970f9dc'/>
<id>urn:sha1:1eb2cded45b35816085c1f962933c187d970f9dc</id>
<content type='text'>
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev-&gt;mtu, new_mtu) as hinted
in commit 501a90c94510 ("inet: protect against too small
mtu values.")

We read dev-&gt;mtu without holding RTNL in many places,
with READ_ONCE() annotations.

It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()

Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Reported-by: Simon Horman &lt;horms@kernel.org&gt;
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller &lt;jacob.e.keller@intel.com&gt;
Reviewed-by: Sabrina Dubroca &lt;sd@queasysnail.net&gt;
Reviewed-by: Simon Horman &lt;horms@kernel.org&gt;
Acked-by: Shannon Nelson &lt;shannon.nelson@amd.com&gt;
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
</entry>
<entry>
<title>net: amd-xgbe: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY</title>
<updated>2024-04-25T17:53:31Z</updated>
<author>
<name>Damien Le Moal</name>
<email>dlemoal@kernel.org</email>
</author>
<published>2024-03-25T07:09:25Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=5b44c2a7056c2feb93db29455782efc8fac58eeb'/>
<id>urn:sha1:5b44c2a7056c2feb93db29455782efc8fac58eeb</id>
<content type='text'>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.

Link: https://lore.kernel.org/r/20240325070944.3600338-15-dlemoal@kernel.org
Signed-off-by: Damien Le Moal &lt;dlemoal@kernel.org&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
</content>
</entry>
</feed>
