blaster4385/linux-IllusionX/drivers/mtd, branch v6.12.10

mtd: rawnand: fix double free in atmel_pmecc_create_user()

2025-01-02T09:34:15Z

commit d8e4771f99c0400a1873235704b28bb803c83d17 upstream. The "user" pointer was converted from being allocated with kzalloc() to being allocated by devm_kzalloc(). Calling kfree(user) will lead to a double free. Fixes: 6d734f1bfc33 ("mtd: rawnand: atmel: Fix possible memory leak") Signed-off-by: Dan Carpenter Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: arasan: Fix missing de-registration of NAND

2025-01-02T09:34:12Z

commit 11e6831fd81468cf48155b9b3c11295c391da723 upstream. The NAND chip-selects are registered for the Arasan driver during initialization but are not de-registered when the driver is unloaded. As a result, if the driver is loaded again, the chip-selects remain registered and busy, making them unavailable for use. Fixes: 197b88fecc50 ("mtd: rawnand: arasan: Add new Arasan NAND controller") Cc: stable@vger.kernel.org Signed-off-by: Maciej Andrzejewski ICEYE Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: arasan: Fix double assertion of chip-select

2025-01-02T09:34:12Z

commit b086a46dae48829e11c0c02580e30d920b76743c upstream. When two chip-selects are configured in the device tree, and the second is a non-native GPIO, both the GPIO-based chip-select and the first native chip-select may be asserted simultaneously. This double assertion causes incorrect read and write operations. The issue occurs because when nfc->ncs <= 2, nfc->spare_cs is always initialized to 0 due to static initialization. Consequently, when the second chip-select (GPIO-based) is selected in anfc_assert_cs(), it is detected by anfc_is_gpio_cs(), and nfc->native_cs is assigned the value 0. This results in both the GPIO-based chip-select being asserted and the NAND controller register receiving 0, erroneously selecting the native chip-select. This patch resolves the issue, as confirmed by oscilloscope testing with configurations involving two or more chip-selects in the device tree. Fixes: acbd3d0945f9 ("mtd: rawnand: arasan: Leverage additional GPIO CS") Cc: stable@vger.kernel.org Signed-off-by: Maciej Andrzejewski Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman

mtd: diskonchip: Cast an operand to prevent potential overflow

2025-01-02T09:34:11Z

commit 9b458e8be0d13e81ed03fffa23f8f9b528bbd786 upstream. There may be a potential integer overflow issue in inftl_partscan(). parts[0].size is defined as "uint64_t" while mtd->erasesize and ip->firstUnit are defined as 32-bit unsigned integer. The result of the calculation will be limited to 32 bits without correct casting. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zichen Xie Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman

mtd: spinand: winbond: Fix 512GW, 01GW, 01JW and 02JW ECC information

2024-12-09T09:41:05Z

commit fee9b240916df82a8b07aef0fdfe96785417a164 upstream. These four chips: * W25N512GW * W25N01GW * W25N01JW * W25N02JW all require a single bit of ECC strength and thus feature an on-die Hamming-like ECC engine. There is no point in filling a ->get_status() callback for them because the main ECC status bytes are located in standard places, and retrieving the number of bitflips in case of corrected chunk is both useless and unsupported (if there are bitflips, then there is 1 at most, so no need to query the chip for that). Without this change, a kernel warning triggers every time a bit flips. Fixes: 6a804fb72de5 ("mtd: spinand: winbond: add support for serial NAND flash") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Reviewed-by: Frieder Schrempf Link: https://lore.kernel.org/linux-mtd/20241009125002.191109-3-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman

mtd: spinand: winbond: Fix 512GW and 02JW OOB layout

2024-12-09T09:41:05Z

commit c1247de51cab53fc357a73804c11fb4fba55b2d9 upstream. Both W25N512GW and W25N02JW chips have 64 bytes of OOB and thus cannot use the layout for 128 bytes OOB. Reference the correct layout instead. Fixes: 6a804fb72de5 ("mtd: spinand: winbond: add support for serial NAND flash") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Reviewed-by: Frieder Schrempf Link: https://lore.kernel.org/linux-mtd/20241009125002.191109-2-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman

ubi: fastmap: Fix duplicate slab cache names while attaching

2024-12-05T13:03:04Z

[ Upstream commit bcddf52b7a17adcebc768d26f4e27cf79adb424c ] Since commit 4c39529663b9 ("slab: Warn on duplicate cache names when DEBUG_VM=y"), the duplicate slab cache names can be detected and a kernel WARNING is thrown out. In UBI fast attaching process, alloc_ai() could be invoked twice with the same slab cache name 'ubi_aeb_slab_cache', which will trigger following warning messages: kmem_cache of name 'ubi_aeb_slab_cache' already exists WARNING: CPU: 0 PID: 7519 at mm/slab_common.c:107 __kmem_cache_create_args+0x100/0x5f0 Modules linked in: ubi(+) nandsim [last unloaded: nandsim] CPU: 0 UID: 0 PID: 7519 Comm: modprobe Tainted: G 6.12.0-rc2 RIP: 0010:__kmem_cache_create_args+0x100/0x5f0 Call Trace: __kmem_cache_create_args+0x100/0x5f0 alloc_ai+0x295/0x3f0 [ubi] ubi_attach+0x3c3/0xcc0 [ubi] ubi_attach_mtd_dev+0x17cf/0x3fa0 [ubi] ubi_init+0x3fb/0x800 [ubi] do_init_module+0x265/0x7d0 __x64_sys_finit_module+0x7a/0xc0 The problem could be easily reproduced by loading UBI device by fastmap with CONFIG_DEBUG_VM=y. Fix it by using different slab names for alloc_ai() callers. Fixes: d2158f69a7d4 ("UBI: Remove alloc_ai() slab name from parameter list") Fixes: fdf10ed710c0 ("ubi: Rework Fastmap attach base code") Signed-off-by: Zhihao Cheng Signed-off-by: Richard Weinberger Signed-off-by: Sasha Levin

ubi: fastmap: wl: Schedule fm_work if wear-leveling pool is empty

2024-12-05T13:03:04Z

[ Upstream commit c4595fe394a289927077e3da561db27811919ee0 ] Since commit 14072ee33d5a ("ubi: fastmap: Check wl_pool for free peb before wear leveling"), wear_leveling_worker() won't schedule fm_work if wear-leveling pool is empty, which could temporarily disable the wear-leveling until the fastmap is updated(eg. pool becomes empty). Fix it by scheduling fm_work if wl_pool is empty during wear-leveing. Fixes: 14072ee33d5a ("ubi: fastmap: Check wl_pool for free peb before wear leveling") Signed-off-by: Zhihao Cheng Signed-off-by: Richard Weinberger Signed-off-by: Sasha Levin

mtd: ubi: fix unreleased fwnode_handle in find_volume_fwnode()

2024-12-05T13:02:54Z

commit 07593293ffabba14125c8998525adde5a832bfa3 upstream. The 'fw_vols' fwnode_handle initialized via device_get_named_child_node() requires explicit calls to fwnode_handle_put() when the variable is no longer required. Add the missing calls to fwnode_handle_put() before the function returns. Cc: stable@vger.kernel.org Fixes: 51932f9fc487 ("mtd: ubi: populate ubi volume fwnode") Signed-off-by: Javier Carrasco Reviewed-by: Zhihao Cheng Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman

ubi: wl: Put source PEB into correct list if trying locking LEB failed

2024-12-05T13:02:53Z

commit d610020f030bec819f42de327c2bd5437d2766b3 upstream. During wear-leveing work, the source PEB will be moved into scrub list when source LEB cannot be locked in ubi_eba_copy_leb(), which is wrong for non-scrub type source PEB. The problem could bring extra and ineffective wear-leveing jobs, which makes more or less negative effects for the life time of flash. Specifically, the process is divided 2 steps: 1. wear_leveling_worker // generate false scrub type PEB ubi_eba_copy_leb // MOVE_RETRY is returned leb_write_trylock // trylock failed scrubbing = 1; e1 is put into ubi->scrub 2. wear_leveling_worker // schedule false scrub type PEB for wl scrubbing = 1 e1 = rb_entry(rb_first(&ubi->scrub)) The problem can be reproduced easily by running fsstress on a small UBIFS partition(<64M, simulated by nandsim) for 5~10mins (CONFIG_MTD_UBI_FASTMAP=y,CONFIG_MTD_UBI_WL_THRESHOLD=50). Following message is shown: ubi0: scrubbed PEB 66 (LEB 0:10), data moved to PEB 165 Since scrub type source PEB has set variable scrubbing as '1', and variable scrubbing is checked before variable keep, so the problem can be fixed by setting keep variable as 1 directly if the source LEB cannot be locked. Fixes: e801e128b220 ("UBI: fix missing scrub when there is a bit-flip") CC: stable@vger.kernel.org Signed-off-by: Zhihao Cheng Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman