blaster4385/linux-IllusionX/drivers/mmc, branch v6.12.1

Revert "mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K"

2024-11-12T18:40:40Z

The commit 8396c793ffdf ("mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K") increased the max_req_size, even for 4K pages, causing various issues: - Panic booting the kernel/rootfs from an SD card on Rockchip RK3566 - Panic booting the kernel/rootfs from an SD card on StarFive JH7100 - "swiotlb buffer is full" and data corruption on StarFive JH7110 At this stage no fix have been found, so it's probably better to just revert the change. This reverts commit 8396c793ffdf28bb8aee7cfe0891080f8cab7890. Cc: stable@vger.kernel.org Cc: Sam Protsenko Fixes: 8396c793ffdf ("mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K") Closes: https://lore.kernel.org/linux-mmc/614692b4-1dbe-31b8-a34d-cb6db1909bb7@w6rz.net/ Closes: https://lore.kernel.org/linux-mmc/CAC8uq=Ppnmv98mpa1CrWLawWoPnu5abtU69v-=G-P7ysATQ2Pw@mail.gmail.com/ Signed-off-by: Aurelien Jarno Message-ID: <20241110114700.622372-1-aurelien@aurel32.net> Signed-off-by: Ulf Hansson

mmc: sunxi-mmc: Fix A100 compatible description

2024-11-12T17:22:57Z

It turns out that the Allwinner A100/A133 SoC only supports 8K DMA blocks (13 bits wide), for both the SD/SDIO and eMMC instances. And while this alone would make a trivial fix, the H616 falls back to the A100 compatible string, so we have to now match the H616 compatible string explicitly against the description advertising 64K DMA blocks. As the A100 is now compatible with the D1 description, let the A100 compatible string point to that block instead, and introduce an explicit match against the H616 string, pointing to the old description. Also remove the redundant setting of clk_delays to NULL on the way. Fixes: 3536b82e5853 ("mmc: sunxi: add support for A100 mmc controller") Cc: stable@vger.kernel.org Signed-off-by: Andre Przywara Tested-by: Parthiban Nallathambi Reviewed-by: Chen-Yu Tsai Message-ID: <20241107014240.24669-1-andre.przywara@arm.com> Signed-off-by: Ulf Hansson

mmc: sdhci-pci-gli: GL9767: Fix low power mode in the SD Express process

2024-10-28T11:30:27Z

When starting the SD Express process, the low power negotiation mode will be disabled, so we need to re-enable it after switching back to SD mode. Fixes: 0e92aec2efa0 ("mmc: sdhci-pci-gli: Add support SD Express card for GL9767") Signed-off-by: Ben Chuang Cc: stable@vger.kernel.org Message-ID: <20241025060017.1663697-2-benchuanggli@gmail.com> Signed-off-by: Ulf Hansson

mmc: sdhci-pci-gli: GL9767: Fix low power mode on the set clock function

2024-10-28T11:27:11Z

On sdhci_gl9767_set_clock(), the vendor header space(VHS) is read-only after calling gl9767_disable_ssc_pll() and gl9767_set_ssc_pll_205mhz(). So the low power negotiation mode cannot be enabled again. Introduce gl9767_set_low_power_negotiation() function to fix it. The explanation process is as below. static void sdhci_gl9767_set_clock() { ... gl9767_vhs_write(); ... value |= PCIE_GLI_9767_CFG_LOW_PWR_OFF; pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value); <--- (a) gl9767_disable_ssc_pll(); <--- (b) sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); if (clock == 0) return; <-- (I) ... if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) { ... gl9767_set_ssc_pll_205mhz(); <--- (c) } ... value &= ~PCIE_GLI_9767_CFG_LOW_PWR_OFF; pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value); <-- (II) gl9767_vhs_read(); } (a) disable low power negotiation mode. When return on (I), the low power mode is disabled. After (b) and (c), VHS is read-only, the low power mode cannot be enabled on (II). Reported-by: Georg Gottleuber Fixes: d2754355512e ("mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL9767") Signed-off-by: Ben Chuang Tested-by: Georg Gottleuber Cc: stable@vger.kernel.org Message-ID: <20241025060017.1663697-1-benchuanggli@gmail.com> Signed-off-by: Ulf Hansson

Merge tag 'mmc-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2024-10-11T18:23:21Z

Pull MMC fixes from Ulf Hansson: "MMC core: - Prevent splat from warning when setting maximum DMA segment MMC host: - mvsdio: Drop sg_miter support for PIO as it didn't work - sdhci-of-dwcmshc: Prevent stale interrupt for the T-Head 1520 variant" * tag 'mmc-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-of-dwcmshc: Prevent stale command interrupt handling Revert "mmc: mvsdio: Use sg_miter for PIO" mmc: core: Only set maximum DMA segment size if DMA is supported

mmc: sdhci-of-dwcmshc: Prevent stale command interrupt handling

2024-10-10T11:30:48Z

While working with the T-Head 1520 LicheePi4A SoC, certain conditions arose that allowed me to reproduce a race issue in the sdhci code. To reproduce the bug, you need to enable the sdio1 controller in the device tree file `arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi` as follows: &sdio1 { bus-width = <4>; max-frequency = <100000000>; no-sd; no-mmc; broken-cd; cap-sd-highspeed; post-power-on-delay-ms = <50>; status = "okay"; wakeup-source; keep-power-in-suspend; }; When resetting the SoC using the reset button, the following messages appear in the dmesg log: [ 8.164898] mmc2: Got command interrupt 0x00000001 even though no command operation was in progress. [ 8.174054] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== [ 8.180503] mmc2: sdhci: Sys addr: 0x00000000 | Version: 0x00000005 [ 8.186950] mmc2: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [ 8.193395] mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [ 8.199841] mmc2: sdhci: Present: 0x03da0000 | Host ctl: 0x00000000 [ 8.206287] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 [ 8.212733] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x0000decf [ 8.219178] mmc2: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 [ 8.225622] mmc2: sdhci: Int enab: 0x00ff1003 | Sig enab: 0x00ff1003 [ 8.232068] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 [ 8.238513] mmc2: sdhci: Caps: 0x3f69c881 | Caps_1: 0x08008177 [ 8.244959] mmc2: sdhci: Cmd: 0x00000502 | Max curr: 0x00191919 [ 8.254115] mmc2: sdhci: Resp[0]: 0x00001009 | Resp[1]: 0x00000000 [ 8.260561] mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 [ 8.267005] mmc2: sdhci: Host ctl2: 0x00001000 [ 8.271453] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000 [ 8.278594] mmc2: sdhci: ============================================ I also enabled some traces to better understand the problem: kworker/3:1-62 [003] ..... 8.163538: mmc_request_start: mmc2: start struct mmc_request[000000000d30cc0c]: cmd_opcode=5 cmd_arg=0x0 cmd_flags=0x2e1 cmd_retries=0 stop_opcode=0 stop_arg=0x0 stop_flags=0x0 stop_retries=0 sbc_opcode=0 sbc_arg=0x0 sbc_flags=0x0 sbc_retires=0 blocks=0 block_size=0 blk_addr=0 data_flags=0x0 tag=0 can_retune=0 doing_retune=0 retune_now=0 need_retune=0 hold_retune=1 retune_period=0 -0 [000] d.h2. 8.164816: sdhci_cmd_irq: hw_name=ffe70a0000.mmc quirks=0x2008008 quirks2=0x8 intmask=0x10000 intmask_p=0x18000 irq/24-mmc2-96 [000] ..... 8.164840: sdhci_thread_irq: msg= irq/24-mmc2-96 [000] d.h2. 8.164896: sdhci_cmd_irq: hw_name=ffe70a0000.mmc quirks=0x2008008 quirks2=0x8 intmask=0x1 intmask_p=0x1 irq/24-mmc2-96 [000] ..... 8.285142: mmc_request_done: mmc2: end struct mmc_request[000000000d30cc0c]: cmd_opcode=5 cmd_err=-110 cmd_resp=0x0 0x0 0x0 0x0 cmd_retries=0 stop_opcode=0 stop_err=0 stop_resp=0x0 0x0 0x0 0x0 stop_retries=0 sbc_opcode=0 sbc_err=0 sbc_resp=0x0 0x0 0x0 0x0 sbc_retries=0 bytes_xfered=0 data_err=0 tag=0 can_retune=0 doing_retune=0 retune_now=0 need_retune=0 hold_retune=1 retune_period=0 Here's what happens: the __mmc_start_request function is called with opcode 5. Since the power to the Wi-Fi card, which resides on this SDIO bus, is initially off after the reset, an interrupt SDHCI_INT_TIMEOUT is triggered. Immediately after that, a second interrupt SDHCI_INT_RESPONSE is triggered. Depending on the exact timing, these conditions can trigger the following race problem: 1) The sdhci_cmd_irq top half handles the command as an error. It sets host->cmd to NULL and host->pending_reset to true. 2) The sdhci_thread_irq bottom half is scheduled next and executes faster than the second interrupt handler for SDHCI_INT_RESPONSE. It clears host->pending_reset before the SDHCI_INT_RESPONSE handler runs. 3) The pending interrupt SDHCI_INT_RESPONSE handler gets called, triggering a code path that prints: "mmc2: Got command interrupt 0x00000001 even though no command operation was in progress." To solve this issue, we need to clear pending interrupts when resetting host->pending_reset. This ensures that after sdhci_threaded_irq restores interrupts, there are no pending stale interrupts. The behavior observed here is non-compliant with the SDHCI standard. Place the code in the sdhci-of-dwcmshc driver to account for a hardware-specific quirk instead of the core SDHCI code. Signed-off-by: Michal Wilczynski Acked-by: Adrian Hunter Fixes: 43658a542ebf ("mmc: sdhci-of-dwcmshc: Add support for T-Head TH1520") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20241008100327.4108895-1-m.wilczynski@samsung.com Signed-off-by: Ulf Hansson

Revert "mmc: mvsdio: Use sg_miter for PIO"

2024-10-02T23:31:13Z

This reverts commit 2761822c00e8c271f10a10affdbd4917d900d7ea. When testing on real hardware the patch does not work. Revert, try to acquire real hardware, and retry. These systems typically don't have highmem anyway so the impact is likely zero. Cc: stable@vger.kernel.org Reported-by: Charlie Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20240927-kirkwood-mmc-regression-v1-1-2e55bbbb7b19@linaro.org Signed-off-by: Ulf Hansson

mmc: core: Only set maximum DMA segment size if DMA is supported

2024-10-02T23:23:57Z

Since upstream commit 334304ac2bac ("dma-mapping: don't return errors from dma_set_max_seg_size") calling dma_set_max_seg_size() on a device not supporting DMA results in a warning traceback. This is seen when booting the sifive_u machine from SD. The underlying SPI controller (sifive,spi0 compatible) explicitly sets dma_mask to NULL. Avoid the backtrace by only calling dma_set_max_seg_size() if DMA is supported. Signed-off-by: Guenter Roeck Reviewed-by: Christoph Hellwig Reviewed-by: Robin Murphy Tested-by: Geert Uytterhoeven Fixes: 334304ac2bac ("dma-mapping: don't return errors from dma_set_max_seg_size") Link: https://lore.kernel.org/r/20240924210123.2288529-1-linux@roeck-us.net Signed-off-by: Ulf Hansson

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23Z

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

[tree-wide] finally take no_llseek out

2024-09-27T15:18:43Z

no_llseek had been defined to NULL two years ago, in commit 868941b14441 ("fs: remove no_llseek") To quote that commit, At -rc1 we'll need do a mechanical removal of no_llseek - git grep -l -w no_llseek | grep -v porting.rst | while read i; do sed -i '/\/d' $i done would do it. Unfortunately, that hadn't been done. Linus, could you do that now, so that we could finally put that thing to rest? All instances are of the form .llseek = no_llseek, so it's obviously safe. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds