<feed xmlns='http://www.w3.org/2005/Atom'>
<title>blaster4385/linux-IllusionX/drivers/mmc/core, branch v6.12.10</title>
<subtitle>Linux kernel with personal config changes for arch linux</subtitle>
<id>http://git.tablaster.dev/blaster4385/linux-IllusionX/atom?h=v6.12.10</id>
<link rel='self' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/atom?h=v6.12.10'/>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/'/>
<updated>2024-12-14T19:03:40Z</updated>
<entry>
<title>mmc: core: Add SD card quirk for broken poweroff notification</title>
<updated>2024-12-14T19:03:40Z</updated>
<author>
<name>Keita Aihara</name>
<email>keita.aihara@sony.com</email>
</author>
<published>2024-09-13T09:44:17Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=bc7ff558d72c4b6426ff2bdce4b56834bb35d39b'/>
<id>urn:sha1:bc7ff558d72c4b6426ff2bdce4b56834bb35d39b</id>
<content type='text'>
[ Upstream commit cd068d51594d9635bf6688fc78717572b78bce6a ]

GIGASTONE Gaming Plus microSD cards manufactured on 02/2022 report that
they support poweroff notification and cache, but they are not working
correctly.

Flush Cache bit never gets cleared in sd_flush_cache() and Poweroff
Notification Ready bit also never gets set to 1 within 1 second from the
end of busy of CMD49 in sd_poweroff_notify().

This leads to I/O error and runtime PM error state.

I observed that the same card manufactured on 01/2024 works as expected.

This problem seems similar to the Kingston cards fixed with
commit c467c8f08185 ("mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston
Canvas Go Plus from 11/2019") and should be handled using quirks.

CID for the problematic card is here.
12345641535443002000000145016200

Manufacturer ID is 0x12 and defined as CID_MANFID_GIGASTONE as of now,
but would like comments on what naming is appropriate because MID list
is not public and not sure it's right.

Signed-off-by: Keita Aihara &lt;keita.aihara@sony.com&gt;
Link: https://lore.kernel.org/r/20240913094417.GA4191647@sony.com
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
</entry>
<entry>
<title>mmc: core: Further prevent card detect during shutdown</title>
<updated>2024-12-14T19:03:31Z</updated>
<author>
<name>Ulf Hansson</name>
<email>ulf.hansson@linaro.org</email>
</author>
<published>2024-11-25T12:24:46Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=d562b457e1c362f60d5c807a3a0775a9204a66a0'/>
<id>urn:sha1:d562b457e1c362f60d5c807a3a0775a9204a66a0</id>
<content type='text'>
commit 87a0d90fcd31c0f36da0332428c9e1a1e0f97432 upstream.

Disabling card detect from the host's -&gt;shutdown_pre() callback turned out
to not be the complete solution. More precisely, beyond the point when the
mmc_bus-&gt;shutdown() has been called, to gracefully power off the card, we
need to prevent card detect. Otherwise the mmc_rescan work may poll for the
card with a CMD13, to see if it's still alive, which then will fail and
hang as the card has already been powered off.

To fix this problem, let's disable mmc_rescan prior to power off the card
during shutdown.

Reported-by: Anthony Pighin &lt;anthony.pighin@nokia.com&gt;
Fixes: 66c915d09b94 ("mmc: core: Disable card detect during shutdown")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
Reviewed-by: Adrian Hunter &lt;adrian.hunter@intel.com&gt;
Closes: https://lore.kernel.org/all/BN0PR08MB695133000AF116F04C3A9FFE83212@BN0PR08MB6951.namprd08.prod.outlook.com/
Tested-by: Anthony Pighin &lt;anthony.pighin@nokia.com&gt;
Message-ID: &lt;20241125122446.18684-1-ulf.hansson@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>mmc: core: Use GFP_NOIO in ACMD22</title>
<updated>2024-12-14T19:03:11Z</updated>
<author>
<name>Avri Altman</name>
<email>avri.altman@wdc.com</email>
</author>
<published>2024-10-21T15:32:27Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=42311846d3580f4584d216819e849c27f98456aa'/>
<id>urn:sha1:42311846d3580f4584d216819e849c27f98456aa</id>
<content type='text'>
[ Upstream commit 869d37475788b0044bec1a33335e24abaf5e8884 ]

While reviewing the SDUC series, Adrian made a comment concerning the
memory allocation code in mmc_sd_num_wr_blocks() - see [1].
Prevent memory allocations from triggering I/O operations while ACMD22
is in progress.

[1] https://lore.kernel.org/linux-mmc/3016fd71-885b-4ef9-97ed-46b4b0cb0e35@intel.com/

Suggested-by: Adrian Hunter &lt;adrian.hunter@intel.com&gt;
Reviewed-by: Adrian Hunter &lt;adrian.hunter@intel.com&gt;
Fixes: 051913dada04 ("mmc_block: do not DMA to stack")
Signed-off-by: Avri Altman &lt;avri.altman@wdc.com&gt;
Cc: stable@vger.kernel.org
Message-ID: &lt;20241021153227.493970-1-avri.altman@wdc.com&gt;
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
</entry>
<entry>
<title>mmc: core: Adjust ACMD22 to SDUC</title>
<updated>2024-12-14T19:03:11Z</updated>
<author>
<name>Avri Altman</name>
<email>avri.altman@wdc.com</email>
</author>
<published>2024-10-06T05:11:45Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=19e22f1e68c76adb191aebf17312d2e7d019d03c'/>
<id>urn:sha1:19e22f1e68c76adb191aebf17312d2e7d019d03c</id>
<content type='text'>
[ Upstream commit 449f34a34088d02457fa0f3216747e8a35bc03ae ]

ACMD22 is used to verify the previously write operation.  Normally, it
returns the number of written sectors as u32.  SDUC, however, returns it
as u64.  This is not a superfluous requirement, because SDUC writes may
exceeds 2TB.  For Linux mmc however, the previously write operation
could not be more than the block layer limits, thus we make room for a
u64 and cast the returning value to u32.

Reviewed-by: Adrian Hunter &lt;adrian.hunter@intel.com&gt;
Signed-off-by: Avri Altman &lt;avri.altman@wdc.com&gt;
Link: https://lore.kernel.org/r/20241006051148.160278-8-avri.altman@wdc.com
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
[Stephen Rothwell: Fix build error when moving to new rc from Linus's tree]
Signed-off-by: Stephen Rothwell &lt;sfr@canb.auug.org.au&gt;
Stable-dep-of: 869d37475788 ("mmc: core: Use GFP_NOIO in ACMD22")
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
</entry>
<entry>
<title>mmc: sd: SDUC Support Recognition</title>
<updated>2024-12-14T19:03:11Z</updated>
<author>
<name>Avri Altman</name>
<email>avri.altman@wdc.com</email>
</author>
<published>2024-10-06T05:11:39Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=c00372e41bf658deab01be55aa83285a599569c0'/>
<id>urn:sha1:c00372e41bf658deab01be55aa83285a599569c0</id>
<content type='text'>
[ Upstream commit fce2ce78af1e14dc1316aaddb5b3308be05cf452 ]

Ultra Capacity SD cards (SDUC) was already introduced in SD7.0.  Those
cards support capacity larger than 2TB and up to including 128TB.

ACMD41 was extended to support the host-card handshake during
initialization.  The card expects that the HCS &amp; HO2T bits to be set in
the command argument, and sets the applicable bits in the R3 returned
response.  On the contrary, if a SDUC card is inserted to a
non-supporting host, it will never respond to this ACMD41 until
eventually, the host will timed out and give up.

Also, add SD CSD version 3.0 - designated for SDUC, and properly parse
the csd register as the c_size field got expanded to 28 bits.

Do not enable SDUC for now - leave it to the last patch in the series.

Tested-by: Ricky WU &lt;ricky_wu@realtek.com&gt;
Reviewed-by: Adrian Hunter &lt;adrian.hunter@intel.com&gt;
Signed-off-by: Avri Altman &lt;avri.altman@wdc.com&gt;
Link: https://lore.kernel.org/r/20241006051148.160278-2-avri.altman@wdc.com
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
Stable-dep-of: 869d37475788 ("mmc: core: Use GFP_NOIO in ACMD22")
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
</entry>
<entry>
<title>mmc: core: Only set maximum DMA segment size if DMA is supported</title>
<updated>2024-10-02T23:23:57Z</updated>
<author>
<name>Guenter Roeck</name>
<email>linux@roeck-us.net</email>
</author>
<published>2024-09-24T21:01:23Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=c26339faed11fae01fafd61e5e97ac3ba7b23ef3'/>
<id>urn:sha1:c26339faed11fae01fafd61e5e97ac3ba7b23ef3</id>
<content type='text'>
Since upstream commit 334304ac2bac ("dma-mapping: don't return errors
from dma_set_max_seg_size") calling dma_set_max_seg_size() on a device
not supporting DMA results in a warning traceback. This is seen when
booting the sifive_u machine from SD. The underlying SPI controller
(sifive,spi0 compatible) explicitly sets dma_mask to NULL.

Avoid the backtrace by only calling dma_set_max_seg_size() if DMA is
supported.

Signed-off-by: Guenter Roeck &lt;linux@roeck-us.net&gt;
Reviewed-by: Christoph Hellwig &lt;hch@lst.de&gt;
Reviewed-by: Robin Murphy &lt;robin.murphy@arm.com&gt;
Tested-by: Geert Uytterhoeven &lt;geert+renesas@glider.be&gt;
Fixes: 334304ac2bac ("dma-mapping: don't return errors from dma_set_max_seg_size")
Link: https://lore.kernel.org/r/20240924210123.2288529-1-linux@roeck-us.net
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
</content>
</entry>
<entry>
<title>[tree-wide] finally take no_llseek out</title>
<updated>2024-09-27T15:18:43Z</updated>
<author>
<name>Al Viro</name>
<email>viro@zeniv.linux.org.uk</email>
</author>
<published>2024-09-27T01:56:11Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=cb787f4ac0c2e439ea8d7e6387b925f74576bdf8'/>
<id>urn:sha1:cb787f4ac0c2e439ea8d7e6387b925f74576bdf8</id>
<content type='text'>
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")

To quote that commit,

  At -rc1 we'll need do a mechanical removal of no_llseek -

  git grep -l -w no_llseek | grep -v porting.rst | while read i; do
	sed -i '/\&lt;no_llseek\&gt;/d' $i
  done

  would do it.

Unfortunately, that hadn't been done.  Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
	.llseek = no_llseek,
so it's obviously safe.

Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
</entry>
<entry>
<title>mmc: core: Use dev_err_probe for deferred regulators</title>
<updated>2024-09-13T12:09:29Z</updated>
<author>
<name>Alexander Stein</name>
<email>alexander.stein@ew.tq-group.com</email>
</author>
<published>2024-09-11T09:09:09Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=cd3689b6772fbc1a4513934a5204fd2fa5b4426b'/>
<id>urn:sha1:cd3689b6772fbc1a4513934a5204fd2fa5b4426b</id>
<content type='text'>
In case vmmc or vqmmc regulator is not available yet, use dev_err_probe
in order to set a deferred probe reason. This is a helpful hint in
/sys/kernel/debug/devices_deferred

Signed-off-by: Alexander Stein &lt;alexander.stein@ew.tq-group.com&gt;
Link: https://lore.kernel.org/r/20240911090910.3060749-1-alexander.stein@ew.tq-group.com
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
</content>
</entry>
<entry>
<title>mmc: block: add RPMB dependency</title>
<updated>2024-09-03T12:34:44Z</updated>
<author>
<name>Jens Wiklander</name>
<email>jens.wiklander@linaro.org</email>
</author>
<published>2024-09-02T15:12:30Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=b6c41df38c24f42482b5c5cd05220b8eb32ff6ff'/>
<id>urn:sha1:b6c41df38c24f42482b5c5cd05220b8eb32ff6ff</id>
<content type='text'>
Prevent build error when CONFIG_RPMB=m and CONFIG_MMC_BLOCK=y by adding
a dependency to CONFIG_RPMB for CONFIG_MMC_BLOCK block so the RPMB
subsystem always is reachable if configured. This means that
CONFIG_MMC_BLOCK automatically becomes compiled as a module if
CONFIG_RPMB is compiled as a module. If CONFIG_RPMB isn't configured or
is configured as built-in, CONFIG_MMC_BLOCK will remain unchanged.

Reported-by: kernel test robot &lt;lkp@intel.com&gt;
Closes: https://lore.kernel.org/oe-kbuild-all/202409021448.RSvcBPzt-lkp@intel.com/
Fixes: 7852028a35f0 ("mmc: block: register RPMB partition with the RPMB subsystem")
Signed-off-by: Jens Wiklander &lt;jens.wiklander@linaro.org&gt;
Acked-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Link: https://lore.kernel.org/r/20240902151231.3705204-1-jens.wiklander@linaro.org
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
</content>
</entry>
<entry>
<title>mmc: core Convert UNSTUFF_BITS macro to inline function</title>
<updated>2024-09-03T12:34:24Z</updated>
<author>
<name>Avri Altman</name>
<email>avri.altman@wdc.com</email>
</author>
<published>2024-09-02T12:33:31Z</published>
<link rel='alternate' type='text/html' href='http://git.tablaster.dev/blaster4385/linux-IllusionX/commit/?id=38fb699795f0f24f1dcbe175537ec9c2ba500fa4'/>
<id>urn:sha1:38fb699795f0f24f1dcbe175537ec9c2ba500fa4</id>
<content type='text'>
The UNSTUFF_BITS macro, which is defined in both drivers/mmc/core/mmc.c
and drivers/mmc/core/sd.c, has been converted to an inline function to
improve readability, maintainability, and type safety.

Signed-off-by: Avri Altman &lt;avri.altman@wdc.com&gt;
Link: https://lore.kernel.org/r/20240902123331.3566447-1-avri.altman@wdc.com
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
</content>
</entry>
</feed>
