blaster4385/linux-IllusionX/drivers/media/i2c/Makefile, branch v6.13

media: i2c: Add GC05A2 image sensor driver

2024-06-24T14:47:34Z

Add a V4L2 sub-device driver for Galaxycore GC05A2 image sensor. Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Zhi Mao [Sakari Ailus: Fold in MAINTAINERS change.] Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: i2c: Add GC08A3 image sensor driver

2024-06-24T14:47:34Z

Add a V4L2 sub-device driver for Galaxycore GC08A3 image sensor. Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Zhi Mao [Sakari Ailus: Fold in MAINTAINERS change.] Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: i2c: vgxy61: Fix device name

2024-06-15T09:16:40Z

Rename 'st-vgxy61' to 'vgxy61', dropping the vendor prefix to follow the same naming scheme as the vast majority of device drivers. The device tree binding does not fall into binding rename exceptions and therefore must not be changed. Keep its legacy name. Signed-off-by: Benjamin Mugnier Acked-by: Krzysztof Kozlowski Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: i2c: add MAX96714 driver

2024-06-04T06:31:26Z

This driver handles the MAX96714 deserializer in tunnel mode. The CSI output will replicate all the CSI traffic forwarded by the remote serializer. The MAX96714 driver can handle MAX96714 and MAX96714F variants with the same "maxim,max96714f" compatible. Signed-off-by: Julien Massot [Sakari Ailus: Adapt to changed i2c_mux_add_adapter arguments.] Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: i2c: add MAX96717 driver

2024-06-04T06:31:26Z

This driver handles the MAX96717 serializer in tunnel mode. All incoming CSI traffic will be tunneled through the GMSL2 link. The MAX96717 driver can handle MAX96717 and MAX96717F variants with the same "maxim,max96717f" compatible. Signed-off-by: Julien Massot [Sakari Ailus: Adapt to changed i2c_mux_add_adapter arguments.] Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: i2c: Add imx283 camera sensor driver

2024-06-04T06:31:25Z

Add a v4l2 subdevice driver for the Sony IMX283 image sensor. The IMX283 is a 20MP Diagonal 15.86 mm (Type 1) CMOS Image Sensor with Square Pixel for Color Cameras. The following features are supported: - Manual exposure an gain control support - vblank/hblank/link freq control support - Test pattern support control - Arbitrary horizontal and vertical cropping - Supported resolution: - 5472x3648 @ 20fps (SRGGB12) - 5472x3648 @ 25fps (SRGGB10) - 2736x1824 @ 50fps (SRGGB12) Signed-off-by: Kieran Bingham Signed-off-by: Umang Jain [Sakari Ailus: Take upstream runtime PM API changes into account.] Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: i2c: Add driver for OmniVision OV64A40

2023-12-13T12:21:21Z

Add a driver for the OmniVision OV64A40 image sensor. Co-developed-by: Lee Jackson Signed-off-by: Lee Jackson Signed-off-by: Jacopo Mondi Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: i2c: gc0308: new driver

2023-12-13T12:21:21Z

Introduce new driver for GalaxyCore GC0308, which is a cheap 640x480 with an on-chip ISP sensor sold since 2010. Data is provided via parallel bus. Reviewed-by: Jacopo Mondi Signed-off-by: Sebastian Reichel [Sakari Ailus: Changed MAINTAINERS to match GC2145 entry.] Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: i2c: Add support for alvium camera

2023-12-13T12:21:20Z

The Alvium camera is shipped with sensor + isp in the same housing. The camera can be equipped with one out of various sensor and abstract the user from this. Camera is connected via MIPI CSI-2. Most of the camera module features are supported, with the main exception being fw update. The driver provides all mandatory, optional and recommended V4L2 controls for maximum compatibility with libcamera References: - https://www.alliedvision.com/en/products/embedded-vision-solutions Signed-off-by: Tommaso Merciai [Sakari Ailus: Assign ret before using it in probe and squash Tommaso's other fixes.] Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil [hverkuil: alvium-csi2.h: SPDX must use /* */ instead of //]

media: i2c: Introduce a driver for the Techwell TW9900 decoder

2023-12-13T10:04:45Z

The Techwell video decoder supports PAL, NTSC standards and has a parallel BT.656 output interface. This commit adds support for this device, with basic support for NTSC and PAL, along with brightness and contrast controls. The TW9900 is capable of automatic standard detection. This driver is implemented with support for PAL and NTSC autodetection. Reviewed-by: Paul Kocialkowski Signed-off-by: Mehdi Djait Signed-off-by: Hans Verkuil