blaster4385/linux-IllusionX/drivers/iio/common, branch v6.12.1

Merge tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus

2024-10-13T15:23:47Z

Jonathan writes: IIO: 1st set of fixes for the 6.12 cycle. Most of this pull request is the result of Javier Carrasco doing a careful audit for missing Kconfig dependencies that luck has meant the random builds have never hit. The rest is the usual mix of old bugs that have surfaced and some fallout from the recent merge window. adi,ad5686 - Fix binding duplication of compatible strings. bosch,bma400 - Fix an uninitialized variable in the event tap handling. bosch,bmi323 - Fix several issues in the register saving and restore on suspend/resume sensiron,spd500 - Fix missing CRC8 dependency ti,op3001 - Fix a missing full-scale range value (values above this point were all reported wrongly) vishay,veml6030 - Fix a segmentation fault due to some type confusion. - Fix wrong ambient light sensor resolution. * tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (34 commits) iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig iio: frequency: {admv4420,adrf6780}: format Kconfig entries iio: adc: ad4695: Add missing Kconfig select iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency() iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config() iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig iio: resolver: ad2s1210 add missing select REGMAP in Kconfig iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: magnetometer: af8133j: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: light: bu27008: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: chemical: ens160: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: dac: ad5766: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: dac: ad3552r: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig ...

iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency()

2024-10-10T17:50:30Z

If hid_sensor_set_report_latency() fails, the error code should be returned instead of a value likely to be interpreted as 'success'. Fixes: 138bc7969c24 ("iio: hid-sensor-hub: Implement batch mode") Signed-off-by: Christophe JAILLET Acked-by: Srinivas Pandruvada Link: https://patch.msgid.link/c50640665f091a04086e5092cf50f73f2055107a.1727980825.git.christophe.jaillet@wanadoo.fr Cc: Signed-off-by: Jonathan Cameron

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23Z

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

iio: common: cros_ec_sensors_core: use new '.masklength' accessors

2024-08-03T09:13:43Z

Make use of iio_get_masklength) and iio_for_each_active_channel() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-21-82913fc0fb87@analog.com Signed-off-by: Jonathan Cameron

iio: common: scmi_iio: Remove unnecessary u64 type cast

2024-08-03T09:13:37Z

The variable uHz already has the type u64 and casting it to u64 is unnecessary. Remove the redundant type cast. Signed-off-by: Thorsten Blum Link: https://patch.msgid.link/20240711134502.168484-1-thorsten.blum@toblux.com Signed-off-by: Jonathan Cameron

iio: common: scmi_iio: convert to dev_err_probe()

2024-06-30T11:27:41Z

Make use of dev_err_probe() and dev_err_ptr_probe() to simplify error paths during probe. Signed-off-by: Nuno Sa Link: https://patch.msgid.link/20240606-dev-add_dev_errp_probe-v3-4-51bb229edd79@analog.com Signed-off-by: Jonathan Cameron

iio: st_sensors: relax WhoAmI check in st_sensors_verify_id()

2024-06-29T18:44:43Z

Hard matching against the WhoAmI values isn't ideal for using devices which are compatible with existing ones. Instead of raising an error, issue a warning instead, thus allowing the driver to continue probing. Suggested-by: Jonathan Cameron Signed-off-by: Kaustabh Chakraborty Link: https://patch.msgid.link/20240625082800.62305-1-kauschluss@disroot.org Signed-off-by: Jonathan Cameron

iio: invensense: fix odr switching to same value

2024-05-27T08:49:20Z

ODR switching happens in 2 steps, update to store the new value and then apply when the ODR change flag is received in the data. When switching to the same ODR value, the ODR change flag is never happening, and frequency switching is blocked waiting for the never coming apply. Fix the issue by preventing update to happen when switching to same ODR value. Fixes: 0ecc363ccea7 ("iio: make invensense timestamp module generic") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://lore.kernel.org/r/20240524124851.567485-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron

iio: invensense: fix timestamp glitches when switching frequency

2024-05-03T10:48:56Z

When a sensor is running and there is a FIFO frequency change due to another sensor turned on/off, there are glitches on timestamp. Fix that by using only interrupt timestamp when there is the corresponding sensor data in the FIFO. Delete FIFO period handling and simplify internal functions. Update integration inside inv_mpu6050 and inv_icm42600 drivers. Fixes: 0ecc363ccea7 ("iio: make invensense timestamp module generic") Cc: Stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://lore.kernel.org/r/20240426094835.138389-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron

iio: invensense: fix interrupt timestamp alignment

2024-05-01T07:26:36Z

Restrict interrupt timestamp alignment for not overflowing max/min period thresholds. Fixes: 0ecc363ccea7 ("iio: make invensense timestamp module generic") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://lore.kernel.org/r/20240426135814.141837-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron