blaster4385/linux-IllusionX/drivers/gpu/drm/i915, branch v6.13

drm/i915/fb: Relax clear color alignment to 64 bytes

2025-01-14T08:15:51Z

Mesa changed its clear color alignment from 4k to 64 bytes without informing the kernel side about the change. This is now likely to cause framebuffer creation to fail. The only thing we do with the clear color buffer in i915 is: 1. map a single page 2. read out bytes 16-23 from said page 3. unmap the page So the only requirement we really have is that those 8 bytes are all contained within one page. Thus we can deal with the Mesa regression by reducing the alignment requiment from 4k to the same 64 bytes in the kernel. We could even go as low as 32 bytes, but IIRC 64 bytes is the hardware requirement on the 3D engine side so matching that seems sensible. Note that the Mesa alignment chages were partially undone so the regression itself was already fixed on userspace side. Cc: stable@vger.kernel.org Cc: Sagar Ghuge Cc: Nanley Chery Reported-by: Xi Ruoyao Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13057 Closes: https://lore.kernel.org/all/45a5bba8de009347262d86a4acb27169d9ae0d9f.camel@xry111.site/ Link: https://gitlab.freedesktop.org/mesa/mesa/-/commit/17f97a69c13832a6c1b0b3aad45b06f07d4b852f Link: https://gitlab.freedesktop.org/mesa/mesa/-/commit/888f63cf1baf34bc95e847a30a041dc7798edddb Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20241129065014.8363-2-ville.syrjala@linux.intel.com Tested-by: Xi Ruoyao Reviewed-by: José Roberto de Souza (cherry picked from commit ed3a892e5e3d6b3f6eeb76db7c92a968aeb52f3d) Signed-off-by: Tvrtko Ursulin

Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"

2025-01-08T08:53:35Z

This reverts commit 483f7d94a0453564ad9295288c0242136c5f36a0. This needs to be reverted since HDCP even after updating the connector state HDCP property we don't reenable HDCP until the next commit in which the CP Property is set causing compliance to fail. --v2 -Fix build issue [Dnyaneshwar] Signed-off-by: Suraj Kandpal Reviewed-by: Dnyaneshwar Bhadane Link: https://patchwork.freedesktop.org/patch/msgid/20250103084517.239998-1-suraj.kandpal@intel.com (cherry picked from commit fcf73e20cd1fe60c3ba5f9626f1e8f9cd4511edf) Signed-off-by: Tvrtko Ursulin

drm/i915/dg1: Fix power gate sequence.

2024-12-24T09:41:03Z

sub-pipe PG is not present on DG1. Setting these bits can disable other power gates and cause GPU hangs on video playbacks. VLK: 16314, 4304 Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13381 Fixes: 85a12d7eb8fe ("drm/i915/tgl: Fix Media power gate sequence.") Cc: Vinay Belgaumkar Cc: Himal Prasad Ghimiray Reviewed-by: Vinay Belgaumkar Reviewed-by: Himal Prasad Ghimiray Link: https://patchwork.freedesktop.org/patch/msgid/20241219210019.70532-1-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi (cherry picked from commit de7061947b4ed4be857d452c60d5fb795831d79e) Signed-off-by: Tvrtko Ursulin

drm/i915/cx0_phy: Fix C10 pll programming sequence

2024-12-24T09:41:00Z

According to spec VDR_CUSTOM_WIDTH register gets programmed after pll specific VDR registers and TX Lane programming registers are done. Moreover we only program into C10_VDR_CONTROL1 to update config and setup master lane once all VDR registers are written into. Bspec: 67636 Fixes: 51390cc0e00a ("drm/i915/mtl: Add Support for C10 PHY message bus and pll programming") Signed-off-by: Suraj Kandpal Reviewed-by: Ankit Nautiyal Link: https://patchwork.freedesktop.org/patch/msgid/20241216181554.2861381-1-suraj.kandpal@intel.com (cherry picked from commit f9d418552ba1e3a0e92487ff82eb515dab7516c0) Signed-off-by: Tvrtko Ursulin

i915/guc: Accumulate active runtime on gt reset

2024-12-17T10:15:15Z

On gt reset, if a context is running, then accumulate it's active time into the busyness counter since there will be no chance for the context to switch out and update it's run time. v2: Move comment right above the if (John) Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa Reviewed-by: John Harrison Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-4-umesh.nerlige.ramappa@intel.com (cherry picked from commit 7ed047da59cfa1acb558b95169d347acc8d85da1) Signed-off-by: Tvrtko Ursulin

i915/guc: Ensure busyness counter increases motonically

2024-12-17T10:15:10Z

Active busyness of an engine is calculated using gt timestamp and the context switch in time. While capturing the gt timestamp, it's possible that the context switches out. This race could result in an active busyness value that is greater than the actual context runtime value by a small amount. This leads to a negative delta and throws off busyness calculations for the user. If a subsequent count is smaller than the previous one, just return the previous one, since we expect the busyness to catch up. Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa Reviewed-by: John Harrison Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-3-umesh.nerlige.ramappa@intel.com (cherry picked from commit cf907f6d294217985e9dafd9985dce874e04ca37) Signed-off-by: Tvrtko Ursulin

i915/guc: Reset engine utilization buffer before registration

2024-12-17T10:15:03Z

On GT reset, we store total busyness counts for all engines and re-register the utilization buffer with GuC. At that time we should reset the buffer, so that we don't get spurious busyness counts on subsequent queries. To repro this issue, run igt@perf_pmu@busy-hang followed by igt@perf_pmu@most-busy-idle-check-all for a couple iterations. Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa Reviewed-by: John Harrison Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-2-umesh.nerlige.ramappa@intel.com (cherry picked from commit abd318237fa6556c1e5225529af145ef15d5ff0d) Signed-off-by: Tvrtko Ursulin

drm/i915: Fix memory leak by correcting cache object name in error handler

2024-12-09T10:29:06Z

Replace "slab_priorities" with "slab_dependencies" in the error handler to avoid memory leak. Fixes: 32eb6bcfdda9 ("drm/i915: Make request allocation caches global") Cc: # v5.2+ Signed-off-by: Jiasheng Jiang Reviewed-by: Nirmoy Das Reviewed-by: Andi Shyti Signed-off-by: Andi Shyti Link: https://patchwork.freedesktop.org/patch/msgid/20241127201042.29620-1-jiashengjiangcool@gmail.com (cherry picked from commit 9bc5e7dc694d3112bbf0fa4c46ef0fa0f114937a) Signed-off-by: Tvrtko Ursulin

drm/i915: Fix NULL pointer dereference in capture_engine

2024-12-09T10:29:03Z

When the intel_context structure contains NULL, it raises a NULL pointer dereference error in drm_info(). Fixes: e8a3319c31a1 ("drm/i915: Allow error capture without a request") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12309 Reviewed-by: Andi Shyti Cc: John Harrison Cc: # v6.3+ Signed-off-by: Eugene Kobyak Signed-off-by: Andi Shyti Link: https://patchwork.freedesktop.org/patch/msgid/xmsgfynkhycw3cf56akp4he2ffg44vuratocsysaowbsnhutzi@augnqbm777at (cherry picked from commit 754302a5bc1bd8fd3b7d85c168b0a1af6d4bba4d) Signed-off-by: Tvrtko Ursulin

drm/i915/color: Stop using non-posted DSB writes for legacy LUT

2024-12-09T10:28:59Z

DSB LUT register writes vs. palette anti-collision logic appear to interact in interesting ways: - posted DSB writes simply vanish into thin air while anti-collision is active - non-posted DSB writes actually get blocked by the anti-collision logic, but unfortunately this ends up hogging the bus for long enough that unrelated parallel CPU MMIO accesses start to disappear instead Even though we are updating the LUT during vblank we aren't immune to the anti-collision logic because it kicks in briefly for pipe prefill (initiated at frame start). The safe time window for performing the LUT update is thus between the undelayed vblank and frame start. Turns out that with low enough CDCLK frequency (DSB execution speed depends on CDCLK) we can exceed that. As we are currently using non-posted writes for the legacy LUT updates, in which case we can hit the far more severe failure mode. The problem is exacerbated by the fact that non-posted writes are much slower than posted writes (~4x it seems). To mititage the problem let's switch to using posted DSB writes for legacy LUT updates (which will involve using the double write approach to avoid other problems with DSB vs. legacy LUT writes). Despite writing each register twice this will in fact make the legacy LUT update faster when compared to the non-posted write approach, making the problem less likely to appear. The failure mode is also less severe. This isn't the 100% solution we need though. That will involve estimating how long the LUT update will take, and pushing frame start and/or delayed vblank forward to guarantee that the update will have finished by the time the pipe prefill starts... Cc: stable@vger.kernel.org Fixes: 34d8311f4a1c ("drm/i915/dsb: Re-instate DSB for LUT updates") Fixes: 25ea3411bd23 ("drm/i915/dsb: Use non-posted register writes for legacy LUT") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12494 Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20241120164123.12706-3-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar (cherry picked from commit 2504a316b35d49522f39cf0dc01830d7c36a9be4) Signed-off-by: Tvrtko Ursulin