blaster4385/linux-IllusionX/arch/arm/boot, branch v6.12.10

ARM: dts: imxrt1050: Fix clocks for mmc

2025-01-17T12:40:58Z

[ Upstream commit 5f122030061db3e5d2bddd9cf5c583deaa6c54ff ] One of the usdhc1 controller's clocks should be IMXRT1050_CLK_AHB_PODF not IMXRT1050_CLK_OSC. Fixes: 1c4f01be3490 ("ARM: dts: imx: Add i.MXRT1050-EVK support") Signed-off-by: Jesse Taube Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

ARM: dts: omap36xx: declare 1GHz OPP as turbo again

2024-12-05T13:02:49Z

commit 96a64e9730c2c76cfa5c510583a0fbf40d62886b upstream. Operating stable without reduced chip life at 1Ghz needs several technologies working: The technologies involve - SmartReflex - DVFS As this cannot directly specified in the OPP table as dependecies in the devicetree yet, use the turbo flag again to mark this OPP as something special to have some kind of opt-in. So revert commit 5f1bf7ae8481 ("ARM: dts: omap36xx: Remove turbo mode for 1GHz variants") Practical reasoning: At least the GTA04A5 (DM3730) has become unstable with that OPP enabled. Furthermore nothing enforces the availability of said technologies, even in the kernel configuration, so allow users to rather opt-in. Cc: Stable@vger.kernel.org Fixes: 5f1bf7ae8481 ("ARM: dts: omap36xx: Remove turbo mode for 1GHz variants") Signed-off-by: Andreas Kemnade Link: https://lore.kernel.org/r/20241018214727.275162-1-andreas@kemnade.info Signed-off-by: Kevin Hilman Signed-off-by: Greg Kroah-Hartman

ARM: dts: cubieboard4: Fix DCDC5 regulator constraints

2024-12-05T13:01:31Z

[ Upstream commit dd36ad71ad65968f97630808bc8d605c929b128e ] The DCDC5 voltage rail in the X-Powers AXP809 PMIC has a resolution of 50mV, so the currently enforced limits of 1.475 and 1.525 volts cannot be set, when the existing regulator value is beyond this range. This will lead to the whole regulator driver to give up and fail probing, which in turn will hang the system, as essential devices depend on the PMIC. In this case a bug in U-Boot set the voltage to 1.75V (meant for DCDC4), and the AXP driver's attempt to correct this lead to this error: ================== [ 4.447653] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded [ 4.450066] vcc-dram: Bringing 1750000uV into 1575000-1575000uV [ 4.460272] vcc-dram: failed to apply 1575000-1575000uV constraint: -EINVAL [ 4.474788] axp20x-regulator axp20x-regulator.0: Failed to register dcdc5 [ 4.482276] axp20x-regulator axp20x-regulator.0: probe with driver axp20x-regulator failed with error -22 ================== Set the limits to values that can be programmed, so any correction will be successful. Signed-off-by: Andre Przywara Fixes: 1e1dea72651b ("ARM: dts: sun9i: cubieboard4: Add AXP809 PMIC device node and regulators") Link: https://patch.msgid.link/20241007222916.19013-1-andre.przywara@arm.com Signed-off-by: Chen-Yu Tsai Signed-off-by: Sasha Levin

ARM: dts: microchip: sam9x60: Add missing property atmel,usart-mode

2024-12-05T13:01:26Z

[ Upstream commit 2f9d013a0c6f1b9109ada5acb28ee26eefc77c03 ] Add the atmel,usart-mode property to the UART nodes. This ensures compliance with the atmel,at91-usart.yaml schema and resolves the errors below: serial@200: $nodename:0: 'serial@200' does not match '^spi(@.*|-([0-9]|[1-9][0-9]+))?$' serial@200: atmel,use-dma-rx: False schema does not allow True serial@200: atmel,use-dma-tx: False schema does not allow True serial@200: atmel,fifo-size: False schema does not allow [[16]] These errors indicate that the property atmel,usart-mode = is missing for UART nodes 0, 1, 2, 3, 4, 6, 7, 8, 9, 10, 11, and 12. Fixes: 99c808335877 ("ARM: dts: at91: sam9x60: Add missing flexcom definitions") Acked-by: Nicolas Ferre Signed-off-by: Andrei Simion Link: https://lore.kernel.org/r/20240912093307.40488-1-andrei.simion@microchip.com [claudiu.beznea: move the atmel,usart-mode close to vendor specific properties to cope with DTS coding style] Signed-off-by: Claudiu Beznea Signed-off-by: Sasha Levin

ARM: dts: renesas: genmai: Fix partition size for QSPI NOR Flash

2024-12-05T13:01:24Z

[ Upstream commit 48e17816c3effa3545e21cd4f7d5a00c55c17a18 ] Second partition was too large, looks like two digits got mixed up. Fixes: mtd: partition "user1" extends beyond the end of device "18000000.flash" -- size truncated to 0x4000000 Fixes: 30e0a8cf886c ("ARM: dts: renesas: genmai: Add FLASH nodes") Signed-off-by: Wolfram Sang Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/20240914182948.94031-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin

Merge tag 'v6.12-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into HEAD

2024-11-01T13:47:37Z

A number of DTS correctnes fixes, to bring down the amount of errors reported by dtbscheck. * tag 'v6.12-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (23 commits) arm64: dts: rockchip: Correct GPIO polarity on brcm BT nodes arm64: dts: rockchip: Drop invalid clock-names from es8388 codec nodes ARM: dts: rockchip: Fix the realtek audio codec on rk3036-kylin ARM: dts: rockchip: Fix the spi controller on rk3036 ARM: dts: rockchip: drop grf reference from rk3036 hdmi ARM: dts: rockchip: fix rk3036 acodec node arm64: dts: rockchip: remove orphaned pinctrl-names from pinephone pro arm64: dts: rockchip: remove num-slots property from rk3328-nanopi-r2s-plus arm64: dts: rockchip: Fix LED triggers on rk3308-roc-cc arm64: dts: rockchip: Remove #cooling-cells from fan on Theobroma lion arm64: dts: rockchip: Remove undocumented supports-emmc property arm64: dts: rockchip: Fix bluetooth properties on Rock960 boards arm64: dts: rockchip: Fix bluetooth properties on rk3566 box demo arm64: dts: rockchip: Drop regulator-init-microvolt from two boards arm64: dts: rockchip: fix i2c2 pinctrl-names property on anbernic-rg353p/v arm64: dts: rockchip: Fix reset-gpios property on brcm BT nodes arm64: dts: rockchip: Fix wakeup prop names on PineNote BT node arm64: dts: rockchip: Remove hdmi's 2nd interrupt on rk3328 arm64: dts: rockchip: Designate Turing RK1's system power controller arm64: dts: rockchip: Start cooling maps numbering from zero on ROCK 5B ... Link: https://lore.kernel.org/r/2847150.mvXUDI8C0e@phil Signed-off-by: Arnd Bergmann

ARM: dts: rockchip: Fix the realtek audio codec on rk3036-kylin

2024-10-25T06:41:15Z

Both the node name as well as the compatible were not named according to the binding expectations, fix that. Fixes: 47bf3a5c9e2a ("ARM: dts: rockchip: add the sound setup for rk3036-kylin board") Cc: Caesar Wang Reviewed-by: Dragan Simic Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20241008203940.2573684-15-heiko@sntech.de Signed-off-by: Heiko Stuebner

ARM: dts: rockchip: Fix the spi controller on rk3036

2024-10-25T06:41:15Z

Compatible and clock names did not match the existing binding. So set the correct values and re-order+rename the clocks. It looks like no rk3036 board did use the spi controller so far, so this was never detected on a running device yet. Fixes: f629fcfab2cd ("ARM: dts: rockchip: support the spi for rk3036") Cc: Caesar Wang Reviewed-by: Dragan Simic Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20241008203940.2573684-14-heiko@sntech.de Signed-off-by: Heiko Stuebner

ARM: dts: rockchip: drop grf reference from rk3036 hdmi

2024-10-25T06:41:15Z

Neither the binding nor the driver implementation specify/use the grf reference provided in the rk3036. And neither does the newer rk3128 user of the hdmi controller. So drop the rockchip,grf property. Fixes: b7217cf19c63 ("ARM: dts: rockchip: add hdmi device node for rk3036") Cc: Caesar Wang Reviewed-by: Dragan Simic Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20241008203940.2573684-13-heiko@sntech.de Signed-off-by: Heiko Stuebner

ARM: dts: rockchip: fix rk3036 acodec node

2024-10-25T06:41:14Z

The acodec node is not conformant to the binding. Set the correct nodename, use the correct compatible, add the needed #sound-dai-cells and sort the rockchip,grf below clocks properties as expected. Fixes: faea098e1808 ("ARM: dts: rockchip: add core rk3036 dtsi") Reviewed-by: Dragan Simic Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20241008203940.2573684-12-heiko@sntech.de Signed-off-by: Heiko Stuebner