5cae841b13
A bunch of drivers use ISA DMA helpers or their equivalents for platforms that have ISA with different DMA controller (a lot of ARM boxen). Currently there is no way to put such dependency in Kconfig - CONFIG_ISA is not it (e.g. it is not set on platforms that have no ISA slots, but have on-board devices that pretend to be ISA ones). New symbol added - ISA_DMA_API. Set when we have functional enable_dma()/set_dma_mode()/etc. set of helpers. Next patches in the series will add missing dependencies for drivers that need them. I'm very carefully staying the hell out of the recurring flamefest on what exactly CONFIG_ISA would mean in ideal world - added symbol has a well-defined meaning and for now I really want to treat it as completely independent from the mess around CONFIG_ISA. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
610 lines
18 KiB
Text
610 lines
18 KiB
Text
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see Documentation/kbuild/kconfig-language.txt.
|
|
#
|
|
config ALPHA
|
|
bool
|
|
default y
|
|
help
|
|
The Alpha is a 64-bit general-purpose processor designed and
|
|
marketed by the Digital Equipment Corporation of blessed memory,
|
|
now Hewlett-Packard. The Alpha Linux project has a home page at
|
|
<http://www.alphalinux.org/>.
|
|
|
|
config 64BIT
|
|
def_bool y
|
|
|
|
config MMU
|
|
bool
|
|
default y
|
|
|
|
config UID16
|
|
bool
|
|
|
|
config RWSEM_GENERIC_SPINLOCK
|
|
bool
|
|
|
|
config RWSEM_XCHGADD_ALGORITHM
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_CALIBRATE_DELAY
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_ISA_DMA
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_IOMAP
|
|
bool
|
|
default n
|
|
|
|
source "init/Kconfig"
|
|
|
|
|
|
menu "System setup"
|
|
|
|
choice
|
|
prompt "Alpha system type"
|
|
default ALPHA_GENERIC
|
|
---help---
|
|
This is the system type of your hardware. A "generic" kernel will
|
|
run on any supported Alpha system. However, if you configure a
|
|
kernel for your specific system, it will be faster and smaller.
|
|
|
|
To find out what type of Alpha system you have, you may want to
|
|
check out the Linux/Alpha FAQ, accessible on the WWW from
|
|
<http://www.alphalinux.org/>. In summary:
|
|
|
|
Alcor/Alpha-XLT AS 600
|
|
Alpha-XL XL-233, XL-266
|
|
AlphaBook1 Alpha laptop
|
|
Avanti AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
|
|
Cabriolet AlphaPC64, AlphaPCI64
|
|
DP264 DP264
|
|
EB164 EB164 21164 evaluation board
|
|
EB64+ EB64+ 21064 evaluation board
|
|
EB66 EB66 21066 evaluation board
|
|
EB66+ EB66+ 21066 evaluation board
|
|
Jensen DECpc 150, DEC 2000 model 300,
|
|
DEC 2000 model 500
|
|
LX164 AlphaPC164-LX
|
|
Lynx AS 2100A
|
|
Miata Personal Workstation 433a, 433au, 500a,
|
|
500au, 600a, or 600au
|
|
Marvel AlphaServer ES47 / ES80 / GS1280
|
|
Mikasa AS 1000
|
|
Noname AXPpci33, UDB (Multia)
|
|
Noritake AS 1000A, AS 600A, AS 800
|
|
PC164 AlphaPC164
|
|
Rawhide AS 1200, AS 4000, AS 4100
|
|
Ruffian RPX164-2, AlphaPC164-UX, AlphaPC164-BX
|
|
SX164 AlphaPC164-SX
|
|
Sable AS 2000, AS 2100
|
|
Shark DS 20L
|
|
Takara Takara
|
|
Titan AlphaServer ES45 / DS25
|
|
Wildfire AlphaServer GS 40/80/160/320
|
|
|
|
If you don't know what to do, choose "generic".
|
|
|
|
config ALPHA_GENERIC
|
|
bool "Generic"
|
|
help
|
|
A generic kernel will run on all supported Alpha hardware.
|
|
|
|
config ALPHA_ALCOR
|
|
bool "Alcor/Alpha-XLT"
|
|
help
|
|
For systems using the Digital ALCOR chipset: 5 chips (4, 64-bit data
|
|
slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O
|
|
Address, CIA) - a 383 pin plastic PGA). It provides a DRAM
|
|
controller (256-bit memory bus) and a PCI interface. It also does
|
|
all the work required to support an external Bcache and to maintain
|
|
memory coherence when a PCI device DMAs into (or out of) memory.
|
|
|
|
config ALPHA_XL
|
|
bool "Alpha-XL"
|
|
help
|
|
XL-233 and XL-266-based Alpha systems.
|
|
|
|
config ALPHA_BOOK1
|
|
bool "AlphaBook1"
|
|
help
|
|
Dec AlphaBook1/Burns Alpha-based laptops.
|
|
|
|
config ALPHA_AVANTI_CH
|
|
bool "Avanti"
|
|
|
|
config ALPHA_CABRIOLET
|
|
bool "Cabriolet"
|
|
help
|
|
Cabriolet AlphaPC64, AlphaPCI64 systems. Derived from EB64+ but now
|
|
baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
|
|
slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
|
|
Bcache SIMMs. Requires power supply with 3.3V output.
|
|
|
|
config ALPHA_DP264
|
|
bool "DP264"
|
|
help
|
|
Various 21264 systems with the tsunami core logic chipset.
|
|
API Networks: 264DP, UP2000(+), CS20;
|
|
Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40.
|
|
|
|
config ALPHA_EB164
|
|
bool "EB164"
|
|
help
|
|
EB164 21164 evaluation board from DEC. Uses 21164 and ALCOR. Has
|
|
ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is
|
|
shared with an ISA slot) and 2 32-bit PCI slots. Uses plus-in
|
|
Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD,
|
|
MOUSE (PS2 style), RTC/NVRAM. Boot ROM is Flash. PC-AT-sized
|
|
motherboard. Requires power supply with 3.3V output.
|
|
|
|
config ALPHA_EB64P_CH
|
|
bool "EB64+"
|
|
|
|
config ALPHA_EB66
|
|
bool "EB66"
|
|
help
|
|
A Digital DS group board. Uses 21066 or 21066A. I/O sub-system is
|
|
identical to EB64+. Baby PC-AT size. Runs from standard PC power
|
|
supply. The EB66 schematic was published as a marketing poster
|
|
advertising the 21066 as "the first microprocessor in the world with
|
|
embedded PCI".
|
|
|
|
config ALPHA_EB66P
|
|
bool "EB66+"
|
|
help
|
|
Later variant of the EB66 board.
|
|
|
|
config ALPHA_EIGER
|
|
bool "Eiger"
|
|
help
|
|
Apparently an obscure OEM single-board computer based on the
|
|
Typhoon/Tsunami chipset family. Information on it is scanty.
|
|
|
|
config ALPHA_JENSEN
|
|
bool "Jensen"
|
|
help
|
|
DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
|
|
of the first-generation Alpha systems. A number of these systems
|
|
seem to be available on the second- hand market. The Jensen is a
|
|
floor-standing tower system which originally used a 150MHz 21064 It
|
|
used programmable logic to interface a 486 EISA I/O bridge to the
|
|
CPU.
|
|
|
|
config ALPHA_LX164
|
|
bool "LX164"
|
|
help
|
|
A technical overview of this board is available at
|
|
<http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
|
|
|
|
config ALPHA_LYNX
|
|
bool "Lynx"
|
|
help
|
|
AlphaServer 2100A-based systems.
|
|
|
|
config ALPHA_MARVEL
|
|
bool "Marvel"
|
|
help
|
|
AlphaServer ES47 / ES80 / GS1280 based on EV7.
|
|
|
|
config ALPHA_MIATA
|
|
bool "Miata"
|
|
help
|
|
The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
|
|
or 600au). There is an Installation HOWTO for this hardware at
|
|
<http://eijk.homelinux.org/~stefan/miata.html>.
|
|
|
|
config ALPHA_MIKASA
|
|
bool "Mikasa"
|
|
help
|
|
AlphaServer 1000-based Alpha systems.
|
|
|
|
config ALPHA_NAUTILUS
|
|
bool "Nautilus"
|
|
help
|
|
Alpha systems based on the AMD 751 & ALI 1543C chipsets.
|
|
|
|
config ALPHA_NONAME_CH
|
|
bool "Noname"
|
|
|
|
config ALPHA_NORITAKE
|
|
bool "Noritake"
|
|
help
|
|
AlphaServer 1000A, AlphaServer 600A, and AlphaServer 800-based
|
|
systems.
|
|
|
|
config ALPHA_PC164
|
|
bool "PC164"
|
|
|
|
config ALPHA_P2K
|
|
bool "Platform2000"
|
|
|
|
config ALPHA_RAWHIDE
|
|
bool "Rawhide"
|
|
help
|
|
AlphaServer 1200, AlphaServer 4000 and AlphaServer 4100 machines.
|
|
See HOWTO at
|
|
<http://www.alphalinux.org/docs/rawhide/4100_install.shtml>.
|
|
|
|
config ALPHA_RUFFIAN
|
|
bool "Ruffian"
|
|
help
|
|
Samsung APC164UX. There is a page on known problems and workarounds
|
|
at <http://www.alphalinux.org/faq/FAQ-11.html>.
|
|
|
|
config ALPHA_RX164
|
|
bool "RX164"
|
|
|
|
config ALPHA_SX164
|
|
bool "SX164"
|
|
|
|
config ALPHA_SABLE
|
|
bool "Sable"
|
|
help
|
|
Digital AlphaServer 2000 and 2100-based systems.
|
|
|
|
config ALPHA_SHARK
|
|
bool "Shark"
|
|
|
|
config ALPHA_TAKARA
|
|
bool "Takara"
|
|
help
|
|
Alpha 11164-based OEM single-board computer.
|
|
|
|
config ALPHA_TITAN
|
|
bool "Titan"
|
|
help
|
|
AlphaServer ES45/DS25 SMP based on EV68 and Titan chipset.
|
|
|
|
config ALPHA_WILDFIRE
|
|
bool "Wildfire"
|
|
help
|
|
AlphaServer GS 40/80/160/320 SMP based on the EV67 core.
|
|
|
|
endchoice
|
|
|
|
# clear all implied options (don't want default values for those):
|
|
# Most of these machines have ISA slots; not exactly sure which don't,
|
|
# and this doesn't activate hordes of code, so do it always.
|
|
config ISA
|
|
bool
|
|
default y
|
|
help
|
|
Find out whether you have ISA slots on your motherboard. ISA is the
|
|
name of a bus system, i.e. the way the CPU talks to the other stuff
|
|
inside your box. Other bus systems are PCI, EISA, MicroChannel
|
|
(MCA) or VESA. ISA is an older system, now being displaced by PCI;
|
|
newer boards don't support it. If you have ISA, say Y, otherwise N.
|
|
|
|
config ISA_DMA_API
|
|
bool
|
|
default y
|
|
|
|
config PCI
|
|
bool
|
|
depends on !ALPHA_JENSEN
|
|
default y
|
|
help
|
|
Find out whether you have a PCI motherboard. PCI is the name of a
|
|
bus system, i.e. the way the CPU talks to the other stuff inside
|
|
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
|
|
VESA. If you have PCI, say Y, otherwise N.
|
|
|
|
The PCI-HOWTO, available from
|
|
<http://www.tldp.org/docs.html#howto>, contains valuable
|
|
information about which PCI hardware does work under Linux and which
|
|
doesn't.
|
|
|
|
config PCI_DOMAINS
|
|
bool
|
|
default y
|
|
|
|
config ALPHA_CORE_AGP
|
|
bool
|
|
depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL
|
|
default y
|
|
|
|
config ALPHA_NONAME
|
|
bool
|
|
depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
|
|
default y
|
|
help
|
|
The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
|
|
UDB). This design was produced by Digital's Technical OEM (TOEM)
|
|
group. It uses the 21066 processor running at 166MHz or 233MHz. It
|
|
is a baby-AT size, and runs from a standard PC power supply. It has
|
|
5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
|
|
2 versions, with either PS/2 or large DIN connectors for the
|
|
keyboard.
|
|
|
|
config ALPHA_EV4
|
|
bool
|
|
depends on ALPHA_JENSEN || (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
|
|
default y if !ALPHA_LYNX
|
|
|
|
config ALPHA_LCA
|
|
bool
|
|
depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
|
|
default y
|
|
|
|
config ALPHA_APECS
|
|
bool
|
|
depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
|
|
default y
|
|
|
|
config ALPHA_EB64P
|
|
bool
|
|
depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
|
|
default y
|
|
help
|
|
Uses 21064 or 21064A and APECs. Has ISA and PCI expansion (3 ISA,
|
|
2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
|
|
ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
|
|
(NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
|
|
SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM. PC-AT size.
|
|
Runs from standard PC power supply.
|
|
|
|
config ALPHA_EV5
|
|
bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX
|
|
default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
|
|
|
|
config ALPHA_EV4
|
|
bool
|
|
default y if ALPHA_LYNX && !ALPHA_EV5
|
|
|
|
config ALPHA_CIA
|
|
bool
|
|
depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
|
|
default y
|
|
|
|
config ALPHA_EV56
|
|
bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR
|
|
default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA
|
|
|
|
config ALPHA_EV56
|
|
prompt "EV56 CPU (speed >= 333MHz)?"
|
|
depends on ALPHA_NORITAKE && ALPHA_PRIMO
|
|
|
|
config ALPHA_EV56
|
|
prompt "EV56 CPU (speed >= 400MHz)?"
|
|
depends on ALPHA_RAWHIDE
|
|
|
|
config ALPHA_PRIMO
|
|
bool "EV5 CPU daughtercard (model 5/xxx)?"
|
|
depends on ALPHA_NORITAKE || ALPHA_MIKASA
|
|
help
|
|
Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
|
|
|
|
config ALPHA_GAMMA
|
|
bool "EV5 CPU(s) (model 5/xxx)?"
|
|
depends on ALPHA_SABLE
|
|
help
|
|
Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
|
|
|
|
config ALPHA_GAMMA
|
|
bool
|
|
depends on ALPHA_LYNX
|
|
default y
|
|
|
|
config ALPHA_T2
|
|
bool
|
|
depends on ALPHA_SABLE || ALPHA_LYNX
|
|
default y
|
|
|
|
config ALPHA_PYXIS
|
|
bool
|
|
depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN
|
|
default y
|
|
|
|
config ALPHA_EV6
|
|
bool
|
|
depends on ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER || ALPHA_MARVEL
|
|
default y
|
|
|
|
config ALPHA_TSUNAMI
|
|
bool
|
|
depends on ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER
|
|
default y
|
|
|
|
config ALPHA_EV67
|
|
bool "EV67 (or later) CPU (speed > 600MHz)?" if ALPHA_DP264 || ALPHA_EIGER
|
|
default y if ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
|
|
help
|
|
Is this a machine based on the EV67 core? If in doubt, select N here
|
|
and the machine will be treated as an EV6.
|
|
|
|
config ALPHA_EV7
|
|
bool
|
|
depends on ALPHA_MARVEL
|
|
default y
|
|
|
|
config ALPHA_MCPCIA
|
|
bool
|
|
depends on ALPHA_RAWHIDE
|
|
default y
|
|
|
|
config ALPHA_POLARIS
|
|
bool
|
|
depends on ALPHA_RX164
|
|
default y
|
|
|
|
config ALPHA_IRONGATE
|
|
bool
|
|
depends on ALPHA_NAUTILUS
|
|
default y
|
|
|
|
config ALPHA_AVANTI
|
|
bool
|
|
depends on ALPHA_XL || ALPHA_AVANTI_CH
|
|
default y
|
|
help
|
|
Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
|
|
Alphas. Info at
|
|
<http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
|
|
|
|
config ALPHA_BROKEN_IRQ_MASK
|
|
bool
|
|
depends on ALPHA_GENERIC || ALPHA_PC164
|
|
default y
|
|
|
|
config ALPHA_SRM
|
|
bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
|
|
default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
|
|
---help---
|
|
There are two different types of booting firmware on Alphas: SRM,
|
|
which is command line driven, and ARC, which uses menus and arrow
|
|
keys. Details about the Linux/Alpha booting process are contained in
|
|
the Linux/Alpha FAQ, accessible on the WWW from
|
|
<http://www.alphalinux.org/>.
|
|
|
|
The usual way to load Linux on an Alpha machine is to use MILO
|
|
(a bootloader that lets you pass command line parameters to the
|
|
kernel just like lilo does for the x86 architecture) which can be
|
|
loaded either from ARC or can be installed directly as a permanent
|
|
firmware replacement from floppy (which requires changing a certain
|
|
jumper on the motherboard). If you want to do either of these, say N
|
|
here. If MILO doesn't work on your system (true for Jensen
|
|
motherboards), you can bypass it altogether and boot Linux directly
|
|
from an SRM console; say Y here in order to do that. Note that you
|
|
won't be able to boot from an IDE disk using SRM.
|
|
|
|
If unsure, say N.
|
|
|
|
config EISA
|
|
bool
|
|
depends on ALPHA_GENERIC || ALPHA_JENSEN || ALPHA_ALCOR || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_RAWHIDE
|
|
default y
|
|
|
|
config SMP
|
|
bool "Symmetric multi-processing support"
|
|
depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
|
|
---help---
|
|
This enables support for systems with more than one CPU. If you have
|
|
a system with only one CPU, like most personal computers, say N. If
|
|
you have a system with more than one CPU, say Y.
|
|
|
|
If you say N here, the kernel will run on single and multiprocessor
|
|
machines, but will use only one CPU of a multiprocessor machine. If
|
|
you say Y here, the kernel will run on many, but not all,
|
|
singleprocessor machines. On a singleprocessor machine, the kernel
|
|
will run faster if you say N here.
|
|
|
|
See also the <file:Documentation/smp.txt>, and the SMP-HOWTO
|
|
available at <http://www.tldp.org/docs.html#howto>.
|
|
|
|
If you don't know what to do here, say N.
|
|
|
|
config HAVE_DEC_LOCK
|
|
bool
|
|
depends on SMP
|
|
default y
|
|
|
|
config NR_CPUS
|
|
int "Maximum number of CPUs (2-64)"
|
|
range 2 64
|
|
depends on SMP
|
|
default "64"
|
|
|
|
config DISCONTIGMEM
|
|
bool "Discontiguous Memory Support (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
help
|
|
Say Y to upport efficient handling of discontiguous physical memory,
|
|
for architectures which are either NUMA (Non-Uniform Memory Access)
|
|
or have huge holes in the physical address space for other reasons.
|
|
See <file:Documentation/vm/numa> for more.
|
|
|
|
config NUMA
|
|
bool "NUMA Support (EXPERIMENTAL)"
|
|
depends on DISCONTIGMEM
|
|
help
|
|
Say Y to compile the kernel to support NUMA (Non-Uniform Memory
|
|
Access). This option is for configuring high-end multiprocessor
|
|
server machines. If in doubt, say N.
|
|
|
|
# LARGE_VMALLOC is racy, if you *really* need it then fix it first
|
|
config ALPHA_LARGE_VMALLOC
|
|
bool
|
|
---help---
|
|
Process creation and other aspects of virtual memory management can
|
|
be streamlined if we restrict the kernel to one PGD for all vmalloc
|
|
allocations. This equates to about 8GB.
|
|
|
|
Under normal circumstances, this is so far and above what is needed
|
|
as to be laughable. However, there are certain applications (such
|
|
as benchmark-grade in-kernel web serving) that can make use of as
|
|
much vmalloc space as is available.
|
|
|
|
Say N unless you know you need gobs and gobs of vmalloc space.
|
|
|
|
config VERBOSE_MCHECK
|
|
bool "Verbose Machine Checks"
|
|
|
|
config VERBOSE_MCHECK_ON
|
|
int "Verbose Printing Mode (0=off, 1=on, 2=all)"
|
|
depends on VERBOSE_MCHECK
|
|
default 1
|
|
---help---
|
|
This option allows the default printing mode to be set, and then
|
|
possibly overridden by a boot command argument.
|
|
|
|
For example, if one wanted the option of printing verbose
|
|
machine checks, but wanted the default to be as if verbose
|
|
machine check printing was turned off, then one would choose
|
|
the printing mode to be 0. Then, upon reboot, one could add
|
|
the boot command line "verbose_mcheck=1" to get the normal
|
|
verbose machine check printing, or "verbose_mcheck=2" to get
|
|
the maximum information available.
|
|
|
|
Take the default (1) unless you want more control or more info.
|
|
|
|
source "drivers/pci/Kconfig"
|
|
source "drivers/eisa/Kconfig"
|
|
|
|
source "drivers/pcmcia/Kconfig"
|
|
|
|
config SRM_ENV
|
|
tristate "SRM environment through procfs"
|
|
depends on PROC_FS
|
|
---help---
|
|
If you enable this option, a subdirectory inside /proc called
|
|
/proc/srm_environment will give you access to the all important
|
|
SRM environment variables (those which have a name) and also
|
|
to all others (by their internal number).
|
|
|
|
SRM is something like a BIOS for Alpha machines. There are some
|
|
other such BIOSes, like AlphaBIOS, which this driver cannot
|
|
support (hey, that's not SRM!).
|
|
|
|
Despite the fact that this driver doesn't work on all Alphas (but
|
|
only on those which have SRM as their firmware), it's save to
|
|
build it even if your particular machine doesn't know about SRM
|
|
(or if you intend to compile a generic kernel). It will simply
|
|
not create those subdirectory in /proc (and give you some warning,
|
|
of course).
|
|
|
|
This driver is also available as a module and will be called
|
|
srm_env then.
|
|
|
|
source "fs/Kconfig.binfmt"
|
|
|
|
endmenu
|
|
|
|
source "drivers/Kconfig"
|
|
|
|
source "fs/Kconfig"
|
|
|
|
source "arch/alpha/oprofile/Kconfig"
|
|
|
|
source "arch/alpha/Kconfig.debug"
|
|
|
|
source "security/Kconfig"
|
|
|
|
source "crypto/Kconfig"
|
|
|
|
source "lib/Kconfig"
|
|
|