linux-IllusionX/drivers/char/ppdev.c
Linus Torvalds 0da522107e compat_ioctl: remove most of fs/compat_ioctl.c
As part of the cleanup of some remaining y2038 issues, I came to
 fs/compat_ioctl.c, which still has a couple of commands that need support
 for time64_t.
 
 In completely unrelated work, I spent time on cleaning up parts of this
 file in the past, moving things out into drivers instead.
 
 After Al Viro reviewed an earlier version of this series and did a lot
 more of that cleanup, I decided to try to completely eliminate the rest
 of it and move it all into drivers.
 
 This series incorporates some of Al's work and many patches of my own,
 but in the end stops short of actually removing the last part, which is
 the scsi ioctl handlers. I have patches for those as well, but they need
 more testing or possibly a rewrite.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdsHCdAAoJEJpsee/mABjZtYkP/1JGl3jFv3Iq/5BCdPkaePP1
 RtMJRNfURgK3GeuHUui330PvVjI/pLWXU/VXMK2MPTASpJLzYz3uCaZrpVWEMpDZ
 +ImzGmgJkITlW1uWU3zOcQhOxTyb1hCZ0Ci+2xn9QAmyOL7prXoXCXDWv3h6iyiF
 lwG+nW+HNtyx41YG+9bRfKNoG0ZJ+nkJ70BV6u0acQHXWn7Xuupa9YUmBL87hxAL
 6dlJfLTJg6q8QSv/Q6LxslfWk2Ti8OOJZOwtFM5R8Bgl0iUcvshiRCKfv/3t9jXD
 dJNvF1uq8z+gracWK49Qsfq5dnZ2ZxHFUo9u0NjbCrxNvWH/sdvhbaUBuJI75seH
 VIznCkdxFhrqitJJ8KmxANxG08u+9zSKjSlxG2SmlA4qFx/AoStoHwQXcogJscNb
 YIXYKmWBvwPzYu09QFAXdHFPmZvp/3HhMWU6o92lvDhsDwzkSGt3XKhCJea4DCaT
 m+oCcoACqSWhMwdbJOEFofSub4bY43s5iaYuKes+c8O261/Dwg6v/pgIVez9mxXm
 TBnvCsotq5m8wbwzv99eFqGeJH8zpDHrXxEtRR5KQqMqjLq/OQVaEzmpHZTEuK7n
 e/V/PAKo2/V63g4k6GApQXDxnjwT+m0aWToWoeEzPYXS6KmtWC91r4bWtslu3rdl
 bN65armTm7bFFR32Avnu
 =lgCl
 -----END PGP SIGNATURE-----

Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground

Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
 "As part of the cleanup of some remaining y2038 issues, I came to
  fs/compat_ioctl.c, which still has a couple of commands that need
  support for time64_t.

  In completely unrelated work, I spent time on cleaning up parts of
  this file in the past, moving things out into drivers instead.

  After Al Viro reviewed an earlier version of this series and did a lot
  more of that cleanup, I decided to try to completely eliminate the
  rest of it and move it all into drivers.

  This series incorporates some of Al's work and many patches of my own,
  but in the end stops short of actually removing the last part, which
  is the scsi ioctl handlers. I have patches for those as well, but they
  need more testing or possibly a rewrite"

* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
  scsi: sd: enable compat ioctls for sed-opal
  pktcdvd: add compat_ioctl handler
  compat_ioctl: move SG_GET_REQUEST_TABLE handling
  compat_ioctl: ppp: move simple commands into ppp_generic.c
  compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
  compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
  compat_ioctl: unify copy-in of ppp filters
  tty: handle compat PPP ioctls
  compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
  compat_ioctl: handle SIOCOUTQNSD
  af_unix: add compat_ioctl support
  compat_ioctl: reimplement SG_IO handling
  compat_ioctl: move WDIOC handling into wdt drivers
  fs: compat_ioctl: move FITRIM emulation into file systems
  gfs2: add compat_ioctl support
  compat_ioctl: remove unused convert_in_user macro
  compat_ioctl: remove last RAID handling code
  compat_ioctl: remove /dev/raw ioctl translation
  compat_ioctl: remove PCI ioctl translation
  compat_ioctl: remove joystick ioctl translation
  ...
2019-12-01 13:46:15 -08:00

882 lines
20 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* linux/drivers/char/ppdev.c
*
* This is the code behind /dev/parport* -- it allows a user-space
* application to use the parport subsystem.
*
* Copyright (C) 1998-2000, 2002 Tim Waugh <tim@cyberelk.net>
*
* A /dev/parportx device node represents an arbitrary device
* on port 'x'. The following operations are possible:
*
* open do nothing, set up default IEEE 1284 protocol to be COMPAT
* close release port and unregister device (if necessary)
* ioctl
* EXCL register device exclusively (may fail)
* CLAIM (register device first time) parport_claim_or_block
* RELEASE parport_release
* SETMODE set the IEEE 1284 protocol to use for read/write
* SETPHASE set the IEEE 1284 phase of a particular mode. Not to be
* confused with ioctl(fd, SETPHASER, &stun). ;-)
* DATADIR data_forward / data_reverse
* WDATA write_data
* RDATA read_data
* WCONTROL write_control
* RCONTROL read_control
* FCONTROL frob_control
* RSTATUS read_status
* NEGOT parport_negotiate
* YIELD parport_yield_blocking
* WCTLONIRQ on interrupt, set control lines
* CLRIRQ clear (and return) interrupt count
* SETTIME sets device timeout (struct timeval)
* GETTIME gets device timeout (struct timeval)
* GETMODES gets hardware supported modes (unsigned int)
* GETMODE gets the current IEEE1284 mode
* GETPHASE gets the current IEEE1284 phase
* GETFLAGS gets current (user-visible) flags
* SETFLAGS sets current (user-visible) flags
* read/write read or write in current IEEE 1284 protocol
* select wait for interrupt (in readfds)
*
* Changes:
* Added SETTIME/GETTIME ioctl, Fred Barnes, 1999.
*
* Arnaldo Carvalho de Melo <acme@conectiva.com.br> 2000/08/25
* - On error, copy_from_user and copy_to_user do not return -EFAULT,
* They return the positive number of bytes *not* copied due to address
* space errors.
*
* Added GETMODES/GETMODE/GETPHASE ioctls, Fred Barnes <frmb2@ukc.ac.uk>, 03/01/2001.
* Added GETFLAGS/SETFLAGS ioctls, Fred Barnes, 04/2001
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched/signal.h>
#include <linux/device.h>
#include <linux/ioctl.h>
#include <linux/parport.h>
#include <linux/ctype.h>
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/major.h>
#include <linux/ppdev.h>
#include <linux/mutex.h>
#include <linux/uaccess.h>
#include <linux/compat.h>
#define PP_VERSION "ppdev: user-space parallel port driver"
#define CHRDEV "ppdev"
struct pp_struct {
struct pardevice *pdev;
wait_queue_head_t irq_wait;
atomic_t irqc;
unsigned int flags;
int irqresponse;
unsigned char irqctl;
struct ieee1284_info state;
struct ieee1284_info saved_state;
long default_inactivity;
int index;
};
/* should we use PARDEVICE_MAX here? */
static struct device *devices[PARPORT_MAX];
static DEFINE_IDA(ida_index);
/* pp_struct.flags bitfields */
#define PP_CLAIMED (1<<0)
#define PP_EXCL (1<<1)
/* Other constants */
#define PP_INTERRUPT_TIMEOUT (10 * HZ) /* 10s */
#define PP_BUFFER_SIZE 1024
#define PARDEVICE_MAX 8
static DEFINE_MUTEX(pp_do_mutex);
/* define fixed sized ioctl cmd for y2038 migration */
#define PPGETTIME32 _IOR(PP_IOCTL, 0x95, s32[2])
#define PPSETTIME32 _IOW(PP_IOCTL, 0x96, s32[2])
#define PPGETTIME64 _IOR(PP_IOCTL, 0x95, s64[2])
#define PPSETTIME64 _IOW(PP_IOCTL, 0x96, s64[2])
static inline void pp_enable_irq(struct pp_struct *pp)
{
struct parport *port = pp->pdev->port;
port->ops->enable_irq(port);
}
static ssize_t pp_read(struct file *file, char __user *buf, size_t count,
loff_t *ppos)
{
unsigned int minor = iminor(file_inode(file));
struct pp_struct *pp = file->private_data;
char *kbuffer;
ssize_t bytes_read = 0;
struct parport *pport;
int mode;
if (!(pp->flags & PP_CLAIMED)) {
/* Don't have the port claimed */
pr_debug(CHRDEV "%x: claim the port first\n", minor);
return -EINVAL;
}
/* Trivial case. */
if (count == 0)
return 0;
kbuffer = kmalloc(min_t(size_t, count, PP_BUFFER_SIZE), GFP_KERNEL);
if (!kbuffer)
return -ENOMEM;
pport = pp->pdev->port;
mode = pport->ieee1284.mode & ~(IEEE1284_DEVICEID | IEEE1284_ADDR);
parport_set_timeout(pp->pdev,
(file->f_flags & O_NONBLOCK) ?
PARPORT_INACTIVITY_O_NONBLOCK :
pp->default_inactivity);
while (bytes_read == 0) {
ssize_t need = min_t(unsigned long, count, PP_BUFFER_SIZE);
if (mode == IEEE1284_MODE_EPP) {
/* various specials for EPP mode */
int flags = 0;
size_t (*fn)(struct parport *, void *, size_t, int);
if (pp->flags & PP_W91284PIC)
flags |= PARPORT_W91284PIC;
if (pp->flags & PP_FASTREAD)
flags |= PARPORT_EPP_FAST;
if (pport->ieee1284.mode & IEEE1284_ADDR)
fn = pport->ops->epp_read_addr;
else
fn = pport->ops->epp_read_data;
bytes_read = (*fn)(pport, kbuffer, need, flags);
} else {
bytes_read = parport_read(pport, kbuffer, need);
}
if (bytes_read != 0)
break;
if (file->f_flags & O_NONBLOCK) {
bytes_read = -EAGAIN;
break;
}
if (signal_pending(current)) {
bytes_read = -ERESTARTSYS;
break;
}
cond_resched();
}
parport_set_timeout(pp->pdev, pp->default_inactivity);
if (bytes_read > 0 && copy_to_user(buf, kbuffer, bytes_read))
bytes_read = -EFAULT;
kfree(kbuffer);
pp_enable_irq(pp);
return bytes_read;
}
static ssize_t pp_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
unsigned int minor = iminor(file_inode(file));
struct pp_struct *pp = file->private_data;
char *kbuffer;
ssize_t bytes_written = 0;
ssize_t wrote;
int mode;
struct parport *pport;
if (!(pp->flags & PP_CLAIMED)) {
/* Don't have the port claimed */
pr_debug(CHRDEV "%x: claim the port first\n", minor);
return -EINVAL;
}
kbuffer = kmalloc(min_t(size_t, count, PP_BUFFER_SIZE), GFP_KERNEL);
if (!kbuffer)
return -ENOMEM;
pport = pp->pdev->port;
mode = pport->ieee1284.mode & ~(IEEE1284_DEVICEID | IEEE1284_ADDR);
parport_set_timeout(pp->pdev,
(file->f_flags & O_NONBLOCK) ?
PARPORT_INACTIVITY_O_NONBLOCK :
pp->default_inactivity);
while (bytes_written < count) {
ssize_t n = min_t(unsigned long, count - bytes_written, PP_BUFFER_SIZE);
if (copy_from_user(kbuffer, buf + bytes_written, n)) {
bytes_written = -EFAULT;
break;
}
if ((pp->flags & PP_FASTWRITE) && (mode == IEEE1284_MODE_EPP)) {
/* do a fast EPP write */
if (pport->ieee1284.mode & IEEE1284_ADDR) {
wrote = pport->ops->epp_write_addr(pport,
kbuffer, n, PARPORT_EPP_FAST);
} else {
wrote = pport->ops->epp_write_data(pport,
kbuffer, n, PARPORT_EPP_FAST);
}
} else {
wrote = parport_write(pp->pdev->port, kbuffer, n);
}
if (wrote <= 0) {
if (!bytes_written)
bytes_written = wrote;
break;
}
bytes_written += wrote;
if (file->f_flags & O_NONBLOCK) {
if (!bytes_written)
bytes_written = -EAGAIN;
break;
}
if (signal_pending(current))
break;
cond_resched();
}
parport_set_timeout(pp->pdev, pp->default_inactivity);
kfree(kbuffer);
pp_enable_irq(pp);
return bytes_written;
}
static void pp_irq(void *private)
{
struct pp_struct *pp = private;
if (pp->irqresponse) {
parport_write_control(pp->pdev->port, pp->irqctl);
pp->irqresponse = 0;
}
atomic_inc(&pp->irqc);
wake_up_interruptible(&pp->irq_wait);
}
static int register_device(int minor, struct pp_struct *pp)
{
struct parport *port;
struct pardevice *pdev = NULL;
char *name;
struct pardev_cb ppdev_cb;
int rc = 0, index;
name = kasprintf(GFP_KERNEL, CHRDEV "%x", minor);
if (name == NULL)
return -ENOMEM;
port = parport_find_number(minor);
if (!port) {
pr_warn("%s: no associated port!\n", name);
rc = -ENXIO;
goto err;
}
index = ida_simple_get(&ida_index, 0, 0, GFP_KERNEL);
memset(&ppdev_cb, 0, sizeof(ppdev_cb));
ppdev_cb.irq_func = pp_irq;
ppdev_cb.flags = (pp->flags & PP_EXCL) ? PARPORT_FLAG_EXCL : 0;
ppdev_cb.private = pp;
pdev = parport_register_dev_model(port, name, &ppdev_cb, index);
parport_put_port(port);
if (!pdev) {
pr_warn("%s: failed to register device!\n", name);
rc = -ENXIO;
ida_simple_remove(&ida_index, index);
goto err;
}
pp->pdev = pdev;
pp->index = index;
dev_dbg(&pdev->dev, "registered pardevice\n");
err:
kfree(name);
return rc;
}
static enum ieee1284_phase init_phase(int mode)
{
switch (mode & ~(IEEE1284_DEVICEID
| IEEE1284_ADDR)) {
case IEEE1284_MODE_NIBBLE:
case IEEE1284_MODE_BYTE:
return IEEE1284_PH_REV_IDLE;
}
return IEEE1284_PH_FWD_IDLE;
}
static int pp_set_timeout(struct pardevice *pdev, long tv_sec, int tv_usec)
{
long to_jiffies;
if ((tv_sec < 0) || (tv_usec < 0))
return -EINVAL;
to_jiffies = usecs_to_jiffies(tv_usec);
to_jiffies += tv_sec * HZ;
if (to_jiffies <= 0)
return -EINVAL;
pdev->timeout = to_jiffies;
return 0;
}
static int pp_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
unsigned int minor = iminor(file_inode(file));
struct pp_struct *pp = file->private_data;
struct parport *port;
void __user *argp = (void __user *)arg;
/* First handle the cases that don't take arguments. */
switch (cmd) {
case PPCLAIM:
{
struct ieee1284_info *info;
int ret;
if (pp->flags & PP_CLAIMED) {
dev_dbg(&pp->pdev->dev, "you've already got it!\n");
return -EINVAL;
}
/* Deferred device registration. */
if (!pp->pdev) {
int err = register_device(minor, pp);
if (err)
return err;
}
ret = parport_claim_or_block(pp->pdev);
if (ret < 0)
return ret;
pp->flags |= PP_CLAIMED;
/* For interrupt-reporting to work, we need to be
* informed of each interrupt. */
pp_enable_irq(pp);
/* We may need to fix up the state machine. */
info = &pp->pdev->port->ieee1284;
pp->saved_state.mode = info->mode;
pp->saved_state.phase = info->phase;
info->mode = pp->state.mode;
info->phase = pp->state.phase;
pp->default_inactivity = parport_set_timeout(pp->pdev, 0);
parport_set_timeout(pp->pdev, pp->default_inactivity);
return 0;
}
case PPEXCL:
if (pp->pdev) {
dev_dbg(&pp->pdev->dev,
"too late for PPEXCL; already registered\n");
if (pp->flags & PP_EXCL)
/* But it's not really an error. */
return 0;
/* There's no chance of making the driver happy. */
return -EINVAL;
}
/* Just remember to register the device exclusively
* when we finally do the registration. */
pp->flags |= PP_EXCL;
return 0;
case PPSETMODE:
{
int mode;
if (copy_from_user(&mode, argp, sizeof(mode)))
return -EFAULT;
/* FIXME: validate mode */
pp->state.mode = mode;
pp->state.phase = init_phase(mode);
if (pp->flags & PP_CLAIMED) {
pp->pdev->port->ieee1284.mode = mode;
pp->pdev->port->ieee1284.phase = pp->state.phase;
}
return 0;
}
case PPGETMODE:
{
int mode;
if (pp->flags & PP_CLAIMED)
mode = pp->pdev->port->ieee1284.mode;
else
mode = pp->state.mode;
if (copy_to_user(argp, &mode, sizeof(mode)))
return -EFAULT;
return 0;
}
case PPSETPHASE:
{
int phase;
if (copy_from_user(&phase, argp, sizeof(phase)))
return -EFAULT;
/* FIXME: validate phase */
pp->state.phase = phase;
if (pp->flags & PP_CLAIMED)
pp->pdev->port->ieee1284.phase = phase;
return 0;
}
case PPGETPHASE:
{
int phase;
if (pp->flags & PP_CLAIMED)
phase = pp->pdev->port->ieee1284.phase;
else
phase = pp->state.phase;
if (copy_to_user(argp, &phase, sizeof(phase)))
return -EFAULT;
return 0;
}
case PPGETMODES:
{
unsigned int modes;
port = parport_find_number(minor);
if (!port)
return -ENODEV;
modes = port->modes;
parport_put_port(port);
if (copy_to_user(argp, &modes, sizeof(modes)))
return -EFAULT;
return 0;
}
case PPSETFLAGS:
{
int uflags;
if (copy_from_user(&uflags, argp, sizeof(uflags)))
return -EFAULT;
pp->flags &= ~PP_FLAGMASK;
pp->flags |= (uflags & PP_FLAGMASK);
return 0;
}
case PPGETFLAGS:
{
int uflags;
uflags = pp->flags & PP_FLAGMASK;
if (copy_to_user(argp, &uflags, sizeof(uflags)))
return -EFAULT;
return 0;
}
} /* end switch() */
/* Everything else requires the port to be claimed, so check
* that now. */
if ((pp->flags & PP_CLAIMED) == 0) {
pr_debug(CHRDEV "%x: claim the port first\n", minor);
return -EINVAL;
}
port = pp->pdev->port;
switch (cmd) {
struct ieee1284_info *info;
unsigned char reg;
unsigned char mask;
int mode;
s32 time32[2];
s64 time64[2];
struct timespec64 ts;
int ret;
case PPRSTATUS:
reg = parport_read_status(port);
if (copy_to_user(argp, &reg, sizeof(reg)))
return -EFAULT;
return 0;
case PPRDATA:
reg = parport_read_data(port);
if (copy_to_user(argp, &reg, sizeof(reg)))
return -EFAULT;
return 0;
case PPRCONTROL:
reg = parport_read_control(port);
if (copy_to_user(argp, &reg, sizeof(reg)))
return -EFAULT;
return 0;
case PPYIELD:
parport_yield_blocking(pp->pdev);
return 0;
case PPRELEASE:
/* Save the state machine's state. */
info = &pp->pdev->port->ieee1284;
pp->state.mode = info->mode;
pp->state.phase = info->phase;
info->mode = pp->saved_state.mode;
info->phase = pp->saved_state.phase;
parport_release(pp->pdev);
pp->flags &= ~PP_CLAIMED;
return 0;
case PPWCONTROL:
if (copy_from_user(&reg, argp, sizeof(reg)))
return -EFAULT;
parport_write_control(port, reg);
return 0;
case PPWDATA:
if (copy_from_user(&reg, argp, sizeof(reg)))
return -EFAULT;
parport_write_data(port, reg);
return 0;
case PPFCONTROL:
if (copy_from_user(&mask, argp,
sizeof(mask)))
return -EFAULT;
if (copy_from_user(&reg, 1 + (unsigned char __user *) arg,
sizeof(reg)))
return -EFAULT;
parport_frob_control(port, mask, reg);
return 0;
case PPDATADIR:
if (copy_from_user(&mode, argp, sizeof(mode)))
return -EFAULT;
if (mode)
port->ops->data_reverse(port);
else
port->ops->data_forward(port);
return 0;
case PPNEGOT:
if (copy_from_user(&mode, argp, sizeof(mode)))
return -EFAULT;
switch ((ret = parport_negotiate(port, mode))) {
case 0: break;
case -1: /* handshake failed, peripheral not IEEE 1284 */
ret = -EIO;
break;
case 1: /* handshake succeeded, peripheral rejected mode */
ret = -ENXIO;
break;
}
pp_enable_irq(pp);
return ret;
case PPWCTLONIRQ:
if (copy_from_user(&reg, argp, sizeof(reg)))
return -EFAULT;
/* Remember what to set the control lines to, for next
* time we get an interrupt. */
pp->irqctl = reg;
pp->irqresponse = 1;
return 0;
case PPCLRIRQ:
ret = atomic_read(&pp->irqc);
if (copy_to_user(argp, &ret, sizeof(ret)))
return -EFAULT;
atomic_sub(ret, &pp->irqc);
return 0;
case PPSETTIME32:
if (copy_from_user(time32, argp, sizeof(time32)))
return -EFAULT;
if ((time32[0] < 0) || (time32[1] < 0))
return -EINVAL;
return pp_set_timeout(pp->pdev, time32[0], time32[1]);
case PPSETTIME64:
if (copy_from_user(time64, argp, sizeof(time64)))
return -EFAULT;
if ((time64[0] < 0) || (time64[1] < 0))
return -EINVAL;
if (IS_ENABLED(CONFIG_SPARC64) && !in_compat_syscall())
time64[1] >>= 32;
return pp_set_timeout(pp->pdev, time64[0], time64[1]);
case PPGETTIME32:
jiffies_to_timespec64(pp->pdev->timeout, &ts);
time32[0] = ts.tv_sec;
time32[1] = ts.tv_nsec / NSEC_PER_USEC;
if (copy_to_user(argp, time32, sizeof(time32)))
return -EFAULT;
return 0;
case PPGETTIME64:
jiffies_to_timespec64(pp->pdev->timeout, &ts);
time64[0] = ts.tv_sec;
time64[1] = ts.tv_nsec / NSEC_PER_USEC;
if (IS_ENABLED(CONFIG_SPARC64) && !in_compat_syscall())
time64[1] <<= 32;
if (copy_to_user(argp, time64, sizeof(time64)))
return -EFAULT;
return 0;
default:
dev_dbg(&pp->pdev->dev, "What? (cmd=0x%x)\n", cmd);
return -EINVAL;
}
/* Keep the compiler happy */
return 0;
}
static long pp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long ret;
mutex_lock(&pp_do_mutex);
ret = pp_do_ioctl(file, cmd, arg);
mutex_unlock(&pp_do_mutex);
return ret;
}
static int pp_open(struct inode *inode, struct file *file)
{
unsigned int minor = iminor(inode);
struct pp_struct *pp;
if (minor >= PARPORT_MAX)
return -ENXIO;
pp = kmalloc(sizeof(struct pp_struct), GFP_KERNEL);
if (!pp)
return -ENOMEM;
pp->state.mode = IEEE1284_MODE_COMPAT;
pp->state.phase = init_phase(pp->state.mode);
pp->flags = 0;
pp->irqresponse = 0;
atomic_set(&pp->irqc, 0);
init_waitqueue_head(&pp->irq_wait);
/* Defer the actual device registration until the first claim.
* That way, we know whether or not the driver wants to have
* exclusive access to the port (PPEXCL).
*/
pp->pdev = NULL;
file->private_data = pp;
return 0;
}
static int pp_release(struct inode *inode, struct file *file)
{
unsigned int minor = iminor(inode);
struct pp_struct *pp = file->private_data;
int compat_negot;
compat_negot = 0;
if (!(pp->flags & PP_CLAIMED) && pp->pdev &&
(pp->state.mode != IEEE1284_MODE_COMPAT)) {
struct ieee1284_info *info;
/* parport released, but not in compatibility mode */
parport_claim_or_block(pp->pdev);
pp->flags |= PP_CLAIMED;
info = &pp->pdev->port->ieee1284;
pp->saved_state.mode = info->mode;
pp->saved_state.phase = info->phase;
info->mode = pp->state.mode;
info->phase = pp->state.phase;
compat_negot = 1;
} else if ((pp->flags & PP_CLAIMED) && pp->pdev &&
(pp->pdev->port->ieee1284.mode != IEEE1284_MODE_COMPAT)) {
compat_negot = 2;
}
if (compat_negot) {
parport_negotiate(pp->pdev->port, IEEE1284_MODE_COMPAT);
dev_dbg(&pp->pdev->dev,
"negotiated back to compatibility mode because user-space forgot\n");
}
if ((pp->flags & PP_CLAIMED) && pp->pdev) {
struct ieee1284_info *info;
info = &pp->pdev->port->ieee1284;
pp->state.mode = info->mode;
pp->state.phase = info->phase;
info->mode = pp->saved_state.mode;
info->phase = pp->saved_state.phase;
parport_release(pp->pdev);
if (compat_negot != 1) {
pr_debug(CHRDEV "%x: released pardevice "
"because user-space forgot\n", minor);
}
}
if (pp->pdev) {
parport_unregister_device(pp->pdev);
ida_simple_remove(&ida_index, pp->index);
pp->pdev = NULL;
pr_debug(CHRDEV "%x: unregistered pardevice\n", minor);
}
kfree(pp);
return 0;
}
/* No kernel lock held - fine */
static __poll_t pp_poll(struct file *file, poll_table *wait)
{
struct pp_struct *pp = file->private_data;
__poll_t mask = 0;
poll_wait(file, &pp->irq_wait, wait);
if (atomic_read(&pp->irqc))
mask |= EPOLLIN | EPOLLRDNORM;
return mask;
}
static struct class *ppdev_class;
static const struct file_operations pp_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = pp_read,
.write = pp_write,
.poll = pp_poll,
.unlocked_ioctl = pp_ioctl,
.compat_ioctl = compat_ptr_ioctl,
.open = pp_open,
.release = pp_release,
};
static void pp_attach(struct parport *port)
{
struct device *ret;
if (devices[port->number])
return;
ret = device_create(ppdev_class, port->dev,
MKDEV(PP_MAJOR, port->number), NULL,
"parport%d", port->number);
if (IS_ERR(ret)) {
pr_err("Failed to create device parport%d\n",
port->number);
return;
}
devices[port->number] = ret;
}
static void pp_detach(struct parport *port)
{
if (!devices[port->number])
return;
device_destroy(ppdev_class, MKDEV(PP_MAJOR, port->number));
devices[port->number] = NULL;
}
static int pp_probe(struct pardevice *par_dev)
{
struct device_driver *drv = par_dev->dev.driver;
int len = strlen(drv->name);
if (strncmp(par_dev->name, drv->name, len))
return -ENODEV;
return 0;
}
static struct parport_driver pp_driver = {
.name = CHRDEV,
.probe = pp_probe,
.match_port = pp_attach,
.detach = pp_detach,
.devmodel = true,
};
static int __init ppdev_init(void)
{
int err = 0;
if (register_chrdev(PP_MAJOR, CHRDEV, &pp_fops)) {
pr_warn(CHRDEV ": unable to get major %d\n", PP_MAJOR);
return -EIO;
}
ppdev_class = class_create(THIS_MODULE, CHRDEV);
if (IS_ERR(ppdev_class)) {
err = PTR_ERR(ppdev_class);
goto out_chrdev;
}
err = parport_register_driver(&pp_driver);
if (err < 0) {
pr_warn(CHRDEV ": unable to register with parport\n");
goto out_class;
}
pr_info(PP_VERSION "\n");
goto out;
out_class:
class_destroy(ppdev_class);
out_chrdev:
unregister_chrdev(PP_MAJOR, CHRDEV);
out:
return err;
}
static void __exit ppdev_cleanup(void)
{
/* Clean up all parport stuff */
parport_unregister_driver(&pp_driver);
class_destroy(ppdev_class);
unregister_chrdev(PP_MAJOR, CHRDEV);
}
module_init(ppdev_init);
module_exit(ppdev_cleanup);
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(PP_MAJOR);