1b75b05b73
Files:
arch/alpha/kernel/core_mcpcia.c
arch/alpha/kernel/sys_rawhide.c
include/asm-alpha/core_mcpcia.h
Determine correct hose configuration; RAWHIDE family can have
2 or 4 hoses, so make sure non-existent hoses are ignored.
arch/alpha/kernel/err_titan.c
Supply a needed #include <asm/irq_regs.h>
arch/alpha/kernel/module.c
Add some useful output to the relocation overflow messages.
arch/alpha/kernel/sys_noritake.c
Supply necessary noritake_end_irq() to correct interrupt handling.
This fixes a problem first noted by hangs during boot probing with
a DE500-BA TULIP NIC present.
arch/alpha/kernel/sys_sio.c
Correct saving of original PIRQ register (PCI IRQ routing);
change default PIRQ setting to leave PCI IRQs 9 and 14 free to
be used for sound (Multia) and IDE (any), respectively.
include/asm-alpha/io.h
Supply the "isa_virt_to_bus" routine.
Signed-off-by: Jay Estabrook <jay.estabrook@hp.com>
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
381 lines
11 KiB
C
381 lines
11 KiB
C
#ifndef __ALPHA_MCPCIA__H__
|
|
#define __ALPHA_MCPCIA__H__
|
|
|
|
/* Define to experiment with fitting everything into one 128MB HAE window.
|
|
One window per bus, that is. */
|
|
#define MCPCIA_ONE_HAE_WINDOW 1
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <asm/compiler.h>
|
|
|
|
/*
|
|
* MCPCIA is the internal name for a core logic chipset which provides
|
|
* PCI access for the RAWHIDE family of systems.
|
|
*
|
|
* This file is based on:
|
|
*
|
|
* RAWHIDE System Programmer's Manual
|
|
* 16-May-96
|
|
* Rev. 1.4
|
|
*
|
|
*/
|
|
|
|
/*------------------------------------------------------------------------**
|
|
** **
|
|
** I/O procedures **
|
|
** **
|
|
** inport[b|w|t|l], outport[b|w|t|l] 8:16:24:32 IO xfers **
|
|
** inportbxt: 8 bits only **
|
|
** inport: alias of inportw **
|
|
** outport: alias of outportw **
|
|
** **
|
|
** inmem[b|w|t|l], outmem[b|w|t|l] 8:16:24:32 ISA memory xfers **
|
|
** inmembxt: 8 bits only **
|
|
** inmem: alias of inmemw **
|
|
** outmem: alias of outmemw **
|
|
** **
|
|
**------------------------------------------------------------------------*/
|
|
|
|
|
|
/* MCPCIA ADDRESS BIT DEFINITIONS
|
|
*
|
|
* 3333 3333 3322 2222 2222 1111 1111 11
|
|
* 9876 5432 1098 7654 3210 9876 5432 1098 7654 3210
|
|
* ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
|
|
* 1 000
|
|
* ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
|
|
* | |\|
|
|
* | Byte Enable --+ |
|
|
* | Transfer Length --+
|
|
* +-- IO space, not cached
|
|
*
|
|
* Byte Transfer
|
|
* Enable Length Transfer Byte Address
|
|
* adr<6:5> adr<4:3> Length Enable Adder
|
|
* ---------------------------------------------
|
|
* 00 00 Byte 1110 0x000
|
|
* 01 00 Byte 1101 0x020
|
|
* 10 00 Byte 1011 0x040
|
|
* 11 00 Byte 0111 0x060
|
|
*
|
|
* 00 01 Word 1100 0x008
|
|
* 01 01 Word 1001 0x028 <= Not supported in this code.
|
|
* 10 01 Word 0011 0x048
|
|
*
|
|
* 00 10 Tribyte 1000 0x010
|
|
* 01 10 Tribyte 0001 0x030
|
|
*
|
|
* 10 11 Longword 0000 0x058
|
|
*
|
|
* Note that byte enables are asserted low.
|
|
*
|
|
*/
|
|
|
|
#define MCPCIA_MAX_HOSES 4
|
|
|
|
#define MCPCIA_MID(m) ((unsigned long)(m) << 33)
|
|
|
|
/* Dodge has PCI0 and PCI1 at MID 4 and 5 respectively.
|
|
Durango adds PCI2 and PCI3 at MID 6 and 7 respectively. */
|
|
#define MCPCIA_HOSE2MID(h) ((h) + 4)
|
|
|
|
#define MCPCIA_MEM_MASK 0x07ffffff /* SPARSE Mem region mask is 27 bits */
|
|
|
|
/*
|
|
* Memory spaces:
|
|
*/
|
|
#define MCPCIA_SPARSE(m) (IDENT_ADDR + 0xf000000000UL + MCPCIA_MID(m))
|
|
#define MCPCIA_DENSE(m) (IDENT_ADDR + 0xf100000000UL + MCPCIA_MID(m))
|
|
#define MCPCIA_IO(m) (IDENT_ADDR + 0xf180000000UL + MCPCIA_MID(m))
|
|
#define MCPCIA_CONF(m) (IDENT_ADDR + 0xf1c0000000UL + MCPCIA_MID(m))
|
|
#define MCPCIA_CSR(m) (IDENT_ADDR + 0xf1e0000000UL + MCPCIA_MID(m))
|
|
#define MCPCIA_IO_IACK(m) (IDENT_ADDR + 0xf1f0000000UL + MCPCIA_MID(m))
|
|
#define MCPCIA_DENSE_IO(m) (IDENT_ADDR + 0xe1fc000000UL + MCPCIA_MID(m))
|
|
#define MCPCIA_DENSE_CONF(m) (IDENT_ADDR + 0xe1fe000000UL + MCPCIA_MID(m))
|
|
|
|
/*
|
|
* General Registers
|
|
*/
|
|
#define MCPCIA_REV(m) (MCPCIA_CSR(m) + 0x000)
|
|
#define MCPCIA_WHOAMI(m) (MCPCIA_CSR(m) + 0x040)
|
|
#define MCPCIA_PCI_LAT(m) (MCPCIA_CSR(m) + 0x080)
|
|
#define MCPCIA_CAP_CTRL(m) (MCPCIA_CSR(m) + 0x100)
|
|
#define MCPCIA_HAE_MEM(m) (MCPCIA_CSR(m) + 0x400)
|
|
#define MCPCIA_HAE_IO(m) (MCPCIA_CSR(m) + 0x440)
|
|
#define _MCPCIA_IACK_SC(m) (MCPCIA_CSR(m) + 0x480)
|
|
#define MCPCIA_HAE_DENSE(m) (MCPCIA_CSR(m) + 0x4C0)
|
|
|
|
/*
|
|
* Interrupt Control registers
|
|
*/
|
|
#define MCPCIA_INT_CTL(m) (MCPCIA_CSR(m) + 0x500)
|
|
#define MCPCIA_INT_REQ(m) (MCPCIA_CSR(m) + 0x540)
|
|
#define MCPCIA_INT_TARG(m) (MCPCIA_CSR(m) + 0x580)
|
|
#define MCPCIA_INT_ADR(m) (MCPCIA_CSR(m) + 0x5C0)
|
|
#define MCPCIA_INT_ADR_EXT(m) (MCPCIA_CSR(m) + 0x600)
|
|
#define MCPCIA_INT_MASK0(m) (MCPCIA_CSR(m) + 0x640)
|
|
#define MCPCIA_INT_MASK1(m) (MCPCIA_CSR(m) + 0x680)
|
|
#define MCPCIA_INT_ACK0(m) (MCPCIA_CSR(m) + 0x10003f00)
|
|
#define MCPCIA_INT_ACK1(m) (MCPCIA_CSR(m) + 0x10003f40)
|
|
|
|
/*
|
|
* Performance Monitor registers
|
|
*/
|
|
#define MCPCIA_PERF_MON(m) (MCPCIA_CSR(m) + 0x300)
|
|
#define MCPCIA_PERF_CONT(m) (MCPCIA_CSR(m) + 0x340)
|
|
|
|
/*
|
|
* Diagnostic Registers
|
|
*/
|
|
#define MCPCIA_CAP_DIAG(m) (MCPCIA_CSR(m) + 0x700)
|
|
#define MCPCIA_TOP_OF_MEM(m) (MCPCIA_CSR(m) + 0x7C0)
|
|
|
|
/*
|
|
* Error registers
|
|
*/
|
|
#define MCPCIA_MC_ERR0(m) (MCPCIA_CSR(m) + 0x800)
|
|
#define MCPCIA_MC_ERR1(m) (MCPCIA_CSR(m) + 0x840)
|
|
#define MCPCIA_CAP_ERR(m) (MCPCIA_CSR(m) + 0x880)
|
|
#define MCPCIA_PCI_ERR1(m) (MCPCIA_CSR(m) + 0x1040)
|
|
#define MCPCIA_MDPA_STAT(m) (MCPCIA_CSR(m) + 0x4000)
|
|
#define MCPCIA_MDPA_SYN(m) (MCPCIA_CSR(m) + 0x4040)
|
|
#define MCPCIA_MDPA_DIAG(m) (MCPCIA_CSR(m) + 0x4080)
|
|
#define MCPCIA_MDPB_STAT(m) (MCPCIA_CSR(m) + 0x8000)
|
|
#define MCPCIA_MDPB_SYN(m) (MCPCIA_CSR(m) + 0x8040)
|
|
#define MCPCIA_MDPB_DIAG(m) (MCPCIA_CSR(m) + 0x8080)
|
|
|
|
/*
|
|
* PCI Address Translation Registers.
|
|
*/
|
|
#define MCPCIA_SG_TBIA(m) (MCPCIA_CSR(m) + 0x1300)
|
|
#define MCPCIA_HBASE(m) (MCPCIA_CSR(m) + 0x1340)
|
|
|
|
#define MCPCIA_W0_BASE(m) (MCPCIA_CSR(m) + 0x1400)
|
|
#define MCPCIA_W0_MASK(m) (MCPCIA_CSR(m) + 0x1440)
|
|
#define MCPCIA_T0_BASE(m) (MCPCIA_CSR(m) + 0x1480)
|
|
|
|
#define MCPCIA_W1_BASE(m) (MCPCIA_CSR(m) + 0x1500)
|
|
#define MCPCIA_W1_MASK(m) (MCPCIA_CSR(m) + 0x1540)
|
|
#define MCPCIA_T1_BASE(m) (MCPCIA_CSR(m) + 0x1580)
|
|
|
|
#define MCPCIA_W2_BASE(m) (MCPCIA_CSR(m) + 0x1600)
|
|
#define MCPCIA_W2_MASK(m) (MCPCIA_CSR(m) + 0x1640)
|
|
#define MCPCIA_T2_BASE(m) (MCPCIA_CSR(m) + 0x1680)
|
|
|
|
#define MCPCIA_W3_BASE(m) (MCPCIA_CSR(m) + 0x1700)
|
|
#define MCPCIA_W3_MASK(m) (MCPCIA_CSR(m) + 0x1740)
|
|
#define MCPCIA_T3_BASE(m) (MCPCIA_CSR(m) + 0x1780)
|
|
|
|
/* Hack! Only words for bus 0. */
|
|
|
|
#ifndef MCPCIA_ONE_HAE_WINDOW
|
|
#define MCPCIA_HAE_ADDRESS MCPCIA_HAE_MEM(4)
|
|
#endif
|
|
#define MCPCIA_IACK_SC _MCPCIA_IACK_SC(4)
|
|
|
|
/*
|
|
* The canonical non-remaped I/O and MEM addresses have these values
|
|
* subtracted out. This is arranged so that folks manipulating ISA
|
|
* devices can use their familiar numbers and have them map to bus 0.
|
|
*/
|
|
|
|
#define MCPCIA_IO_BIAS MCPCIA_IO(4)
|
|
#define MCPCIA_MEM_BIAS MCPCIA_DENSE(4)
|
|
|
|
/* Offset between ram physical addresses and pci64 DAC bus addresses. */
|
|
#define MCPCIA_DAC_OFFSET (1UL << 40)
|
|
|
|
/*
|
|
* Data structure for handling MCPCIA machine checks:
|
|
*/
|
|
struct el_MCPCIA_uncorrected_frame_mcheck {
|
|
struct el_common header;
|
|
struct el_common_EV5_uncorrectable_mcheck procdata;
|
|
};
|
|
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
#ifndef __EXTERN_INLINE
|
|
#define __EXTERN_INLINE extern inline
|
|
#define __IO_EXTERN_INLINE
|
|
#endif
|
|
|
|
/*
|
|
* I/O functions:
|
|
*
|
|
* MCPCIA, the RAWHIDE family PCI/memory support chipset for the EV5 (21164)
|
|
* and EV56 (21164a) processors, can use either a sparse address mapping
|
|
* scheme, or the so-called byte-word PCI address space, to get at PCI memory
|
|
* and I/O.
|
|
*
|
|
* Unfortunately, we can't use BWIO with EV5, so for now, we always use SPARSE.
|
|
*/
|
|
|
|
/*
|
|
* Memory functions. 64-bit and 32-bit accesses are done through
|
|
* dense memory space, everything else through sparse space.
|
|
*
|
|
* For reading and writing 8 and 16 bit quantities we need to
|
|
* go through one of the three sparse address mapping regions
|
|
* and use the HAE_MEM CSR to provide some bits of the address.
|
|
* The following few routines use only sparse address region 1
|
|
* which gives 1Gbyte of accessible space which relates exactly
|
|
* to the amount of PCI memory mapping *into* system address space.
|
|
* See p 6-17 of the specification but it looks something like this:
|
|
*
|
|
* 21164 Address:
|
|
*
|
|
* 3 2 1
|
|
* 9876543210987654321098765432109876543210
|
|
* 1ZZZZ0.PCI.QW.Address............BBLL
|
|
*
|
|
* ZZ = SBZ
|
|
* BB = Byte offset
|
|
* LL = Transfer length
|
|
*
|
|
* PCI Address:
|
|
*
|
|
* 3 2 1
|
|
* 10987654321098765432109876543210
|
|
* HHH....PCI.QW.Address........ 00
|
|
*
|
|
* HHH = 31:29 HAE_MEM CSR
|
|
*
|
|
*/
|
|
|
|
#define vip volatile int __force *
|
|
#define vuip volatile unsigned int __force *
|
|
|
|
#ifdef MCPCIA_ONE_HAE_WINDOW
|
|
#define MCPCIA_FROB_MMIO \
|
|
if (__mcpcia_is_mmio(hose)) { \
|
|
set_hae(hose & 0xffffffff); \
|
|
hose = hose - MCPCIA_DENSE(4) + MCPCIA_SPARSE(4); \
|
|
}
|
|
#else
|
|
#define MCPCIA_FROB_MMIO \
|
|
if (__mcpcia_is_mmio(hose)) { \
|
|
hose = hose - MCPCIA_DENSE(4) + MCPCIA_SPARSE(4); \
|
|
}
|
|
#endif
|
|
|
|
static inline int __mcpcia_is_mmio(unsigned long addr)
|
|
{
|
|
return (addr & 0x80000000UL) == 0;
|
|
}
|
|
|
|
__EXTERN_INLINE unsigned int mcpcia_ioread8(void __iomem *xaddr)
|
|
{
|
|
unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
|
|
unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
|
|
unsigned long result;
|
|
|
|
MCPCIA_FROB_MMIO;
|
|
|
|
result = *(vip) ((addr << 5) + hose + 0x00);
|
|
return __kernel_extbl(result, addr & 3);
|
|
}
|
|
|
|
__EXTERN_INLINE void mcpcia_iowrite8(u8 b, void __iomem *xaddr)
|
|
{
|
|
unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
|
|
unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
|
|
unsigned long w;
|
|
|
|
MCPCIA_FROB_MMIO;
|
|
|
|
w = __kernel_insbl(b, addr & 3);
|
|
*(vuip) ((addr << 5) + hose + 0x00) = w;
|
|
}
|
|
|
|
__EXTERN_INLINE unsigned int mcpcia_ioread16(void __iomem *xaddr)
|
|
{
|
|
unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
|
|
unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
|
|
unsigned long result;
|
|
|
|
MCPCIA_FROB_MMIO;
|
|
|
|
result = *(vip) ((addr << 5) + hose + 0x08);
|
|
return __kernel_extwl(result, addr & 3);
|
|
}
|
|
|
|
__EXTERN_INLINE void mcpcia_iowrite16(u16 b, void __iomem *xaddr)
|
|
{
|
|
unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
|
|
unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
|
|
unsigned long w;
|
|
|
|
MCPCIA_FROB_MMIO;
|
|
|
|
w = __kernel_inswl(b, addr & 3);
|
|
*(vuip) ((addr << 5) + hose + 0x08) = w;
|
|
}
|
|
|
|
__EXTERN_INLINE unsigned int mcpcia_ioread32(void __iomem *xaddr)
|
|
{
|
|
unsigned long addr = (unsigned long)xaddr;
|
|
|
|
if (!__mcpcia_is_mmio(addr))
|
|
addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
|
|
|
|
return *(vuip)addr;
|
|
}
|
|
|
|
__EXTERN_INLINE void mcpcia_iowrite32(u32 b, void __iomem *xaddr)
|
|
{
|
|
unsigned long addr = (unsigned long)xaddr;
|
|
|
|
if (!__mcpcia_is_mmio(addr))
|
|
addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
|
|
|
|
*(vuip)addr = b;
|
|
}
|
|
|
|
|
|
__EXTERN_INLINE void __iomem *mcpcia_ioportmap(unsigned long addr)
|
|
{
|
|
return (void __iomem *)(addr + MCPCIA_IO_BIAS);
|
|
}
|
|
|
|
__EXTERN_INLINE void __iomem *mcpcia_ioremap(unsigned long addr,
|
|
unsigned long size)
|
|
{
|
|
return (void __iomem *)(addr + MCPCIA_MEM_BIAS);
|
|
}
|
|
|
|
__EXTERN_INLINE int mcpcia_is_ioaddr(unsigned long addr)
|
|
{
|
|
return addr >= MCPCIA_SPARSE(0);
|
|
}
|
|
|
|
__EXTERN_INLINE int mcpcia_is_mmio(const volatile void __iomem *xaddr)
|
|
{
|
|
unsigned long addr = (unsigned long) xaddr;
|
|
return __mcpcia_is_mmio(addr);
|
|
}
|
|
|
|
#undef MCPCIA_FROB_MMIO
|
|
|
|
#undef vip
|
|
#undef vuip
|
|
|
|
#undef __IO_PREFIX
|
|
#define __IO_PREFIX mcpcia
|
|
#define mcpcia_trivial_rw_bw 2
|
|
#define mcpcia_trivial_rw_lq 1
|
|
#define mcpcia_trivial_io_bw 0
|
|
#define mcpcia_trivial_io_lq 0
|
|
#define mcpcia_trivial_iounmap 1
|
|
#include <asm/io_trivial.h>
|
|
|
|
#ifdef __IO_EXTERN_INLINE
|
|
#undef __EXTERN_INLINE
|
|
#undef __IO_EXTERN_INLINE
|
|
#endif
|
|
|
|
#endif /* __KERNEL__ */
|
|
|
|
#endif /* __ALPHA_MCPCIA__H__ */
|