1394f03221
This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
183 lines
2.9 KiB
ArmAsm
183 lines
2.9 KiB
ArmAsm
/****************************************************
|
|
* LED1 ---- PF6 LED2 ---- PF7 *
|
|
* LED3 ---- PF8 LED4 ---- PF9 *
|
|
* LED5 ---- PF10 LED6 ---- PF11 *
|
|
****************************************************/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <asm/blackfin.h>
|
|
|
|
/* All functions in this file save the registers they uses.
|
|
So there is no need to save any registers before calling them. */
|
|
|
|
.text;
|
|
|
|
/* Initialize LEDs. */
|
|
|
|
ENTRY(_led_init)
|
|
LINK 12;
|
|
[--SP] = P0;
|
|
[--SP] = R0;
|
|
[--SP] = R1;
|
|
[--SP] = R2;
|
|
R1 = PF6|PF7|PF8|PF9|PF10|PF11 (Z);
|
|
R2 = ~R1;
|
|
|
|
P0.H = hi(PORTF_FER);
|
|
P0.L = lo(PORTF_FER);
|
|
R0 = W[P0](Z);
|
|
SSYNC;
|
|
R0 = R0 & R2;
|
|
W[P0] = R0.L;
|
|
SSYNC;
|
|
|
|
P0.H = hi(PORTFIO_DIR);
|
|
P0.L = lo(PORTFIO_DIR);
|
|
R0 = W[P0](Z);
|
|
SSYNC;
|
|
R0 = R0 | R1;
|
|
W[P0] = R0.L;
|
|
SSYNC;
|
|
|
|
P0.H = hi(PORTFIO_INEN);
|
|
P0.L = lo(PORTFIO_INEN);
|
|
R0 = W[P0](Z);
|
|
SSYNC;
|
|
R0 = R0 & R2;
|
|
W[P0] = R0.L;
|
|
SSYNC;
|
|
|
|
R2 = [SP++];
|
|
R1 = [SP++];
|
|
R0 = [SP++];
|
|
P0 = [SP++];
|
|
UNLINK;
|
|
RTS;
|
|
.size _led_init, .-_led_init
|
|
|
|
/* Set one LED on. Leave other LEDs unchanged.
|
|
It expects the LED number passed through R0. */
|
|
|
|
ENTRY(_led_on)
|
|
LINK 12;
|
|
[--SP] = P0;
|
|
[--SP] = R1;
|
|
CALL _led_init;
|
|
R1 = 1;
|
|
R0 += 5;
|
|
R1 <<= R0;
|
|
P0.H = hi(PORTFIO);
|
|
P0.L = lo(PORTFIO);
|
|
R0 = W[P0](Z);
|
|
SSYNC;
|
|
R0 = R0 | R1;
|
|
W[P0] = R0.L;
|
|
SSYNC;
|
|
R1 = [SP++];
|
|
P0 = [SP++];
|
|
UNLINK;
|
|
RTS;
|
|
.size _led_on, .-_led_on
|
|
|
|
/* Set one LED off. Leave other LEDs unchanged. */
|
|
|
|
ENTRY(_led_off)
|
|
LINK 12;
|
|
[--SP] = P0;
|
|
[--SP] = R1;
|
|
CALL _led_init;
|
|
R1 = 1;
|
|
R0 += 5;
|
|
R1 <<= R0;
|
|
R1 = ~R1;
|
|
P0.H = hi(PORTFIO);
|
|
P0.L = lo(PORTFIO);
|
|
R0 = W[P0](Z);
|
|
SSYNC;
|
|
R0 = R0 & R1;
|
|
W[P0] = R0.L;
|
|
SSYNC;
|
|
R1 = [SP++];
|
|
P0 = [SP++];
|
|
UNLINK;
|
|
RTS;
|
|
.size _led_off, .-_led_off
|
|
|
|
/* Toggle one LED. Leave other LEDs unchanged. */
|
|
|
|
ENTRY(_led_toggle)
|
|
LINK 12;
|
|
[--SP] = P0;
|
|
[--SP] = R1;
|
|
CALL _led_init;
|
|
R1 = 1;
|
|
R0 += 5;
|
|
R1 <<= R0;
|
|
P0.H = hi(PORTFIO);
|
|
P0.L = lo(PORTFIO);
|
|
R0 = W[P0](Z);
|
|
SSYNC;
|
|
R0 = R0 ^ R1;
|
|
W[P0] = R0.L;
|
|
SSYNC;
|
|
R1 = [SP++];
|
|
P0 = [SP++];
|
|
UNLINK;
|
|
RTS;
|
|
.size _led_toggle, .-_led_toggle
|
|
|
|
/* Display the number using LEDs in binary format. */
|
|
|
|
ENTRY(_led_disp_num)
|
|
LINK 12;
|
|
[--SP] = P0;
|
|
[--SP] = R1;
|
|
[--SP] = R2;
|
|
CALL _led_init;
|
|
R1 = 0x3f(X);
|
|
R0 = R0 & R1;
|
|
R2 = 6(X);
|
|
R0 <<= R2;
|
|
R1 <<= R2;
|
|
P0.H = hi(PORTFIO);
|
|
P0.L = lo(PORTFIO);
|
|
R2 = W[P0](Z);
|
|
SSYNC;
|
|
R1 = ~R1;
|
|
R2 = R2 & R1;
|
|
R2 = R2 | R0;
|
|
W[P0] = R2.L;
|
|
SSYNC;
|
|
R2 = [SP++];
|
|
R1 = [SP++];
|
|
P0 = [SP++];
|
|
UNLINK;
|
|
RTS;
|
|
.size _led_disp_num, .-_led_disp_num
|
|
|
|
/* Toggle the number using LEDs in binary format. */
|
|
|
|
ENTRY(_led_toggle_num)
|
|
LINK 12;
|
|
[--SP] = P0;
|
|
[--SP] = R1;
|
|
[--SP] = R2;
|
|
CALL _led_init;
|
|
R1 = 0x3f(X);
|
|
R0 = R0 & R1;
|
|
R1 = 6(X);
|
|
R0 <<= R1;
|
|
P0.H = hi(PORTFIO);
|
|
P0.L = lo(PORTFIO);
|
|
R1 = W[P0](Z);
|
|
SSYNC;
|
|
R1 = R1 ^ R0;
|
|
W[P0] = R1.L;
|
|
SSYNC;
|
|
R2 = [SP++];
|
|
R1 = [SP++];
|
|
P0 = [SP++];
|
|
UNLINK;
|
|
RTS;
|
|
.size _led_toggle_num, .-_led_toggle_num
|
|
|