Blaster4385/linux-IllusionX
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux-IllusionX/arch/ppc/kernel/cpu_setup_6xx.S
Kumar Gala bbde630b55 [PATCH] ppc32: Added cputable entry for 7448 
Added cputable entry for 7448 as well adding it to checks for saving and
restoring of cpu state.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:00 -07:00

477 lines
11 KiB
ArmAsm
Raw Blame History

/*
* This file contains low level CPU setup functions.
* Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <linux/config.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/ppc_asm.h>
#include <asm/cputable.h>
#include <asm/ppc_asm.h>
#include <asm/offsets.h>
#include <asm/cache.h>
_GLOBAL(__setup_cpu_601)
blr
_GLOBAL(__setup_cpu_603)
b setup_common_caches
_GLOBAL(__setup_cpu_604)
mflr r4
bl setup_common_caches
bl setup_604_hid0
mtlr r4
blr
_GLOBAL(__setup_cpu_750)
mflr r4
bl __init_fpu_registers
bl setup_common_caches
bl setup_750_7400_hid0
mtlr r4
blr
_GLOBAL(__setup_cpu_750cx)
mflr r4
bl __init_fpu_registers
bl setup_common_caches
bl setup_750_7400_hid0
bl setup_750cx
mtlr r4
blr
_GLOBAL(__setup_cpu_750fx)
mflr r4
bl __init_fpu_registers
bl setup_common_caches
bl setup_750_7400_hid0
bl setup_750fx
mtlr r4
blr
_GLOBAL(__setup_cpu_7400)
mflr r4
bl __init_fpu_registers
bl setup_7400_workarounds
bl setup_common_caches
bl setup_750_7400_hid0
mtlr r4
blr
_GLOBAL(__setup_cpu_7410)
mflr r4
bl __init_fpu_registers
bl setup_7410_workarounds
bl setup_common_caches
bl setup_750_7400_hid0
li r3,0
mtspr SPRN_L2CR2,r3
mtlr r4
blr
_GLOBAL(__setup_cpu_745x)
mflr r4
bl setup_common_caches
bl setup_745x_specifics
mtlr r4
blr
/* Enable caches for 603's, 604, 750 & 7400 */
setup_common_caches:
mfspr r11,SPRN_HID0
andi. r0,r11,HID0_DCE
ori r11,r11,HID0_ICE|HID0_DCE
ori r8,r11,HID0_ICFI
bne 1f /* don't invalidate the D-cache */
ori r8,r8,HID0_DCI /* unless it wasn't enabled */
1: sync
mtspr SPRN_HID0,r8 /* enable and invalidate caches */
sync
mtspr SPRN_HID0,r11 /* enable caches */
sync
isync
blr
/* 604, 604e, 604ev, ...
* Enable superscalar execution & branch history table
*/
setup_604_hid0:
mfspr r11,SPRN_HID0
ori r11,r11,HID0_SIED|HID0_BHTE
ori r8,r11,HID0_BTCD
sync
mtspr SPRN_HID0,r8 /* flush branch target address cache */
sync /* on 604e/604r */
mtspr SPRN_HID0,r11
sync
isync
blr
/* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
* erratas we work around here.
* Moto MPC710CE.pdf describes them, those are errata
* #3, #4 and #5
* Note that we assume the firmware didn't choose to
* apply other workarounds (there are other ones documented
* in the .pdf). It appear that Apple firmware only works
* around #3 and with the same fix we use. We may want to
* check if the CPU is using 60x bus mode in which case
* the workaround for errata #4 is useless. Also, we may
* want to explicitely clear HID0_NOPDST as this is not
* needed once we have applied workaround #5 (though it's
* not set by Apple's firmware at least).
*/
setup_7400_workarounds:
mfpvr r3
rlwinm r3,r3,0,20,31
cmpwi 0,r3,0x0207
ble 1f
blr
setup_7410_workarounds:
mfpvr r3
rlwinm r3,r3,0,20,31
cmpwi 0,r3,0x0100
bnelr
1:
mfspr r11,SPRN_MSSSR0
/* Errata #3: Set L1OPQ_SIZE to 0x10 */
rlwinm r11,r11,0,9,6
oris r11,r11,0x0100
/* Errata #4: Set L2MQ_SIZE to 1 (check for MPX mode first ?) */
oris r11,r11,0x0002
/* Errata #5: Set DRLT_SIZE to 0x01 */
rlwinm r11,r11,0,5,2
oris r11,r11,0x0800
sync
mtspr SPRN_MSSSR0,r11
sync
isync
blr
/* 740/750/7400/7410
* Enable Store Gathering (SGE), Address Brodcast (ABE),
* Branch History Table (BHTE), Branch Target ICache (BTIC)
* Dynamic Power Management (DPM), Speculative (SPD)
* Clear Instruction cache throttling (ICTC)
*/
setup_750_7400_hid0:
mfspr r11,SPRN_HID0
ori r11,r11,HID0_SGE | HID0_ABE | HID0_BHTE | HID0_BTIC
oris r11,r11,HID0_DPM@h
BEGIN_FTR_SECTION
xori r11,r11,HID0_BTIC
END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
BEGIN_FTR_SECTION
xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */
END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
li r3,HID0_SPD
andc r11,r11,r3 /* clear SPD: enable speculative */
li r3,0
mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */
isync
mtspr SPRN_HID0,r11
sync
isync
blr
/* 750cx specific
* Looks like we have to disable NAP feature for some PLL settings...
* (waiting for confirmation)
*/
setup_750cx:
mfspr r10, SPRN_HID1
rlwinm r10,r10,4,28,31
cmpwi cr0,r10,7
cmpwi cr1,r10,9
cmpwi cr2,r10,11
cror 4*cr0+eq,4*cr0+eq,4*cr1+eq
cror 4*cr0+eq,4*cr0+eq,4*cr2+eq
bnelr
lwz r6,CPU_SPEC_FEATURES(r5)
li r7,CPU_FTR_CAN_NAP
andc r6,r6,r7
stw r6,CPU_SPEC_FEATURES(r5)
blr
/* 750fx specific
*/
setup_750fx:
blr
/* MPC 745x
* Enable Store Gathering (SGE), Branch Folding (FOLD)
* Branch History Table (BHTE), Branch Target ICache (BTIC)
* Dynamic Power Management (DPM), Speculative (SPD)
* Ensure our data cache instructions really operate.
* Timebase has to be running or we wouldn't have made it here,
* just ensure we don't disable it.
* Clear Instruction cache throttling (ICTC)
* Enable L2 HW prefetch
*/
setup_745x_specifics:
/* We check for the presence of an L3 cache setup by
* the firmware. If any, we disable NAP capability as
* it's known to be bogus on rev 2.1 and earlier
*/
mfspr r11,SPRN_L3CR
andis. r11,r11,L3CR_L3E@h
beq 1f
lwz r6,CPU_SPEC_FEATURES(r5)
andi. r0,r6,CPU_FTR_L3_DISABLE_NAP
beq 1f
li r7,CPU_FTR_CAN_NAP
andc r6,r6,r7
stw r6,CPU_SPEC_FEATURES(r5)
1:
mfspr r11,SPRN_HID0
/* All of the bits we have to set.....
*/
ori r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE
ori r11,r11,HID0_LRSTK | HID0_BTIC
oris r11,r11,HID0_DPM@h
BEGIN_FTR_SECTION
xori r11,r11,HID0_BTIC
END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
BEGIN_FTR_SECTION
xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */
END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
/* All of the bits we have to clear....
*/
li r3,HID0_SPD | HID0_NOPDST | HID0_NOPTI
andc r11,r11,r3 /* clear SPD: enable speculative */
li r3,0
mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */
isync
mtspr SPRN_HID0,r11
sync
isync
/* Enable L2 HW prefetch, if L2 is enabled
*/
mfspr r3,SPRN_L2CR
andis. r3,r3,L2CR_L2E@h
beqlr
mfspr r3,SPRN_MSSCR0
ori r3,r3,3
sync
mtspr SPRN_MSSCR0,r3
sync
isync
blr
/*
* Initialize the FPU registers. This is needed to work around an errata
* in some 750 cpus where using a not yet initialized FPU register after
* power on reset may hang the CPU
*/
_GLOBAL(__init_fpu_registers)
mfmsr r10
ori r11,r10,MSR_FP
mtmsr r11
isync
addis r9,r3,empty_zero_page@ha
addi r9,r9,empty_zero_page@l
REST_32FPRS(0,r9)
sync
mtmsr r10
isync
blr
/* Definitions for the table use to save CPU states */
#define CS_HID0 0
#define CS_HID1 4
#define CS_HID2 8
#define CS_MSSCR0 12
#define CS_MSSSR0 16
#define CS_ICTRL 20
#define CS_LDSTCR 24
#define CS_LDSTDB 28
#define CS_SIZE 32
.data
.balign L1_CACHE_LINE_SIZE
cpu_state_storage:
.space CS_SIZE
.balign L1_CACHE_LINE_SIZE,0
.text
/* Called in normal context to backup CPU 0 state. This
* does not include cache settings. This function is also
* called for machine sleep. This does not include the MMU
* setup, BATs, etc... but rather the "special" registers
* like HID0, HID1, MSSCR0, etc...
*/
_GLOBAL(__save_cpu_setup)
/* Some CR fields are volatile, we back it up all */
mfcr r7
/* Get storage ptr */
lis r5,cpu_state_storage@h
ori r5,r5,cpu_state_storage@l
/* Save HID0 (common to all CONFIG_6xx cpus) */
mfspr r3,SPRN_HID0
stw r3,CS_HID0(r5)
/* Now deal with CPU type dependent registers */
mfspr r3,SPRN_PVR
srwi r3,r3,16
cmplwi cr0,r3,0x8000 /* 7450 */
cmplwi cr1,r3,0x000c /* 7400 */
cmplwi cr2,r3,0x800c /* 7410 */
cmplwi cr3,r3,0x8001 /* 7455 */
cmplwi cr4,r3,0x8002 /* 7457 */
cmplwi cr5,r3,0x8003 /* 7447A */
cmplwi cr6,r3,0x7000 /* 750FX */
cmplwi cr7,r3,0x8004 /* 7448 */
/* cr1 is 7400 || 7410 */
cror 4*cr1+eq,4*cr1+eq,4*cr2+eq
/* cr0 is 74xx */
cror 4*cr0+eq,4*cr0+eq,4*cr3+eq
cror 4*cr0+eq,4*cr0+eq,4*cr4+eq
cror 4*cr0+eq,4*cr0+eq,4*cr1+eq
cror 4*cr0+eq,4*cr0+eq,4*cr5+eq
cror 4*cr0+eq,4*cr0+eq,4*cr7+eq
bne 1f
/* Backup 74xx specific regs */
mfspr r4,SPRN_MSSCR0
stw r4,CS_MSSCR0(r5)
mfspr r4,SPRN_MSSSR0
stw r4,CS_MSSSR0(r5)
beq cr1,1f
/* Backup 745x specific registers */
mfspr r4,SPRN_HID1
stw r4,CS_HID1(r5)
mfspr r4,SPRN_ICTRL
stw r4,CS_ICTRL(r5)
mfspr r4,SPRN_LDSTCR
stw r4,CS_LDSTCR(r5)
mfspr r4,SPRN_LDSTDB
stw r4,CS_LDSTDB(r5)
1:
bne cr6,1f
/* Backup 750FX specific registers */
mfspr r4,SPRN_HID1
stw r4,CS_HID1(r5)
/* If rev 2.x, backup HID2 */
mfspr r3,SPRN_PVR
andi. r3,r3,0xff00
cmpwi cr0,r3,0x0200
bne 1f
mfspr r4,SPRN_HID2
stw r4,CS_HID2(r5)
1:
mtcr r7
blr
/* Called with no MMU context (typically MSR:IR/DR off) to
* restore CPU state as backed up by the previous
* function. This does not include cache setting
*/
_GLOBAL(__restore_cpu_setup)
/* Some CR fields are volatile, we back it up all */
mfcr r7
/* Get storage ptr */
lis r5,(cpu_state_storage-KERNELBASE)@h
ori r5,r5,cpu_state_storage@l
/* Restore HID0 */
lwz r3,CS_HID0(r5)
sync
isync
mtspr SPRN_HID0,r3
sync
isync
/* Now deal with CPU type dependent registers */
mfspr r3,SPRN_PVR
srwi r3,r3,16
cmplwi cr0,r3,0x8000 /* 7450 */
cmplwi cr1,r3,0x000c /* 7400 */
cmplwi cr2,r3,0x800c /* 7410 */
cmplwi cr3,r3,0x8001 /* 7455 */
cmplwi cr4,r3,0x8002 /* 7457 */
cmplwi cr5,r3,0x8003 /* 7447A */
cmplwi cr6,r3,0x7000 /* 750FX */
cmplwi cr7,r3,0x8004 /* 7448 */
/* cr1 is 7400 || 7410 */
cror 4*cr1+eq,4*cr1+eq,4*cr2+eq
/* cr0 is 74xx */
cror 4*cr0+eq,4*cr0+eq,4*cr3+eq
cror 4*cr0+eq,4*cr0+eq,4*cr4+eq
cror 4*cr0+eq,4*cr0+eq,4*cr1+eq
cror 4*cr0+eq,4*cr0+eq,4*cr5+eq
cror 4*cr0+eq,4*cr0+eq,4*cr7+eq
bne 2f
/* Restore 74xx specific regs */
lwz r4,CS_MSSCR0(r5)
sync
mtspr SPRN_MSSCR0,r4
sync
isync
lwz r4,CS_MSSSR0(r5)
sync
mtspr SPRN_MSSSR0,r4
sync
isync
bne cr2,1f
/* Clear 7410 L2CR2 */
li r4,0
mtspr SPRN_L2CR2,r4
1: beq cr1,2f
/* Restore 745x specific registers */
lwz r4,CS_HID1(r5)
sync
mtspr SPRN_HID1,r4
isync
sync
lwz r4,CS_ICTRL(r5)
sync
mtspr SPRN_ICTRL,r4
isync
sync
lwz r4,CS_LDSTCR(r5)
sync
mtspr SPRN_LDSTCR,r4
isync
sync
lwz r4,CS_LDSTDB(r5)
sync
mtspr SPRN_LDSTDB,r4
isync
sync
2: bne cr6,1f
/* Restore 750FX specific registers
* that is restore HID2 on rev 2.x and PLL config & switch
* to PLL 0 on all
*/
/* If rev 2.x, restore HID2 with low voltage bit cleared */
mfspr r3,SPRN_PVR
andi. r3,r3,0xff00
cmpwi cr0,r3,0x0200
bne 4f
lwz r4,CS_HID2(r5)
rlwinm r4,r4,0,19,17
mtspr SPRN_HID2,r4
sync
4:
lwz r4,CS_HID1(r5)
rlwinm r5,r4,0,16,14
mtspr SPRN_HID1,r5
/* Wait for PLL to stabilize */
mftbl r5
3: mftbl r6
sub r6,r6,r5
cmplwi cr0,r6,10000
ble 3b
/* Setup final PLL */
mtspr SPRN_HID1,r4
1:
mtcr r7
blr
Reference in a new issue View git blame Copy permalink