linux-IllusionX/drivers/scsi
Ranjan Kumar a2b38291f7 scsi: mpi3mr: Validate SAS port assignments
commit b9e63d6c7c0e94a99e1af7c9c0c7fad13a2f2453 upstream.

A sanity check on phy_mask was added in commit 3668651def ("scsi:
mpi3mr: Sanitise num_phys"). This causes warning messages when more than
64 phys are detected and devices connected to phys greater than 64 are
dropped.

The phy_mask bitmap is only needed for controller phys and not required
for expander phys. Controller phys can go up to a maximum of 64 and
therefore u64 is good enough to contain phy_mask bitmap.

To suppress those warnings and allow devices to be discovered as before
the offending commit, restrict the phy_mask setting and lowest phy
setting only to the controller phys.

Fixes: 3668651def ("scsi: mpi3mr: Sanitise num_phys")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410051943.Mp9o5DlF-lkp@intel.com/
Reported-by: Alexander Motin <mav@ixsystems.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20241008074353.200379-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-22 15:51:25 +02:00
..
aacraid
aic7xxx
aic94xx
arcmsr
arm
be2iscsi
bfa
bnx2fc
bnx2i
csiostor
cxgbi
cxlflash
device_handler
elx
esas2r
fcoe
fnic scsi: fnic: Move flush_work initialization out of if block 2024-10-17 15:26:58 +02:00
hisi_sas
ibmvscsi
ibmvscsi_tgt
isci
libfc
libsas
lpfc scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING 2024-10-17 15:26:41 +02:00
megaraid
mpi3mr scsi: mpi3mr: Validate SAS port assignments 2024-10-22 15:51:25 +02:00
mpt3sas
mvsas
pcmcia
pm8001
qedf
qedi
qla2xxx
qla4xxx
smartpqi
snic
sym53c8xx_2
.gitignore
3w-9xxx.c
3w-9xxx.h
3w-sas.c
3w-sas.h
3w-xxxx.c
3w-xxxx.h
53c700.c
53c700.h
53c700.scr
53c700_d.h_shipped
a100u2w.c
a100u2w.h
a2091.c
a2091.h
a3000.c
a3000.h
a4000t.c
advansys.c
aha152x.c
aha152x.h
aha1542.c
aha1542.h
aha1740.c
aha1740.h
am53c974.c
atari_scsi.c
atp870u.c
atp870u.h
BusLogic.c
BusLogic.h
bvme6000_scsi.c
ch.c
constants.c
dc395x.c
dc395x.h
dmx3191d.c
esp_scsi.c
esp_scsi.h
fdomain.c
fdomain.h
fdomain_isa.c
fdomain_pci.c
FlashPoint.c
g_NCR5380.c
gvp11.c
gvp11.h
hosts.c
hpsa.c
hpsa.h
hpsa_cmd.h
hptiop.c
hptiop.h
imm.c
imm.h
initio.c
initio.h
ipr.c
ipr.h
ips.c
ips.h
iscsi_boot_sysfs.c
iscsi_tcp.c
iscsi_tcp.h
jazz_esp.c
Kconfig
lasi700.c
libiscsi.c
libiscsi_tcp.c
mac53c94.c
mac53c94.h
mac_esp.c
mac_scsi.c
Makefile
megaraid.c
megaraid.h
mesh.c
mesh.h
mvme16x_scsi.c
mvme147.c
mvme147.h
mvumi.c
mvumi.h
myrb.c
myrb.h
myrs.c
myrs.h
ncr53c8xx.c
ncr53c8xx.h
NCR5380.c
NCR5380.h
nsp32.c
nsp32.h
nsp32_debug.c
nsp32_io.h
pmcraid.c
pmcraid.h
ppa.c
ppa.h
ps3rom.c
qla1280.c
qla1280.h
qlogicfas.c
qlogicfas408.c
qlogicfas408.h
qlogicpti.c
qlogicpti.h
raid_class.c
script_asm.pl
scsi.c
scsi_bsg.c
scsi_common.c
scsi_debug.c
scsi_debugfs.c
scsi_debugfs.h
scsi_devinfo.c
scsi_dh.c
scsi_error.c
scsi_ioctl.c
scsi_lib.c
scsi_lib_dma.c
scsi_lib_test.c
scsi_logging.c
scsi_logging.h
scsi_netlink.c
scsi_pm.c
scsi_priv.h
scsi_proc.c
scsi_proto_test.c
scsi_sas_internal.h
scsi_scan.c
scsi_sysctl.c
scsi_sysfs.c
scsi_trace.c
scsi_transport_api.h
scsi_transport_fc.c
scsi_transport_iscsi.c
scsi_transport_sas.c
scsi_transport_spi.c
scsi_transport_srp.c
scsicam.c
sd.c
sd.h
sd_dif.c
sd_trace.h
sd_zbc.c
sense_codes.h
ses.c
sg.c
sgiwd93.c
sim710.c
sni_53c710.c
sr.c
sr.h
sr_ioctl.c
sr_vendor.c
st.c
st.h
st_options.h
stex.c
storvsc_drv.c
sun3_scsi.c
sun3_scsi_vme.c
sun3x_esp.c
sun_esp.c
virtio_scsi.c
vmw_pvscsi.c
vmw_pvscsi.h
wd33c93.c scsi: wd33c93: Don't use stale scsi_pointer value 2024-10-17 15:26:58 +02:00
wd33c93.h
wd719x.c
wd719x.h
xen-scsifront.c
zalon.c
zorro7xx.c
zorro_esp.c