4c6338f866
Use sizeof(*priv) instead of sizeof(struct stm32_rng_private), the former makes renaming of struct stm32_rng_private easier if necessary, as it removes one site where such rename has to happen. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Uwe Kleine-König <ukleinek@kernel.org> Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
575 lines
15 KiB
C
575 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (c) 2015, Daniel Thompson
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/hw_random.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define RNG_CR 0x00
|
|
#define RNG_CR_RNGEN BIT(2)
|
|
#define RNG_CR_CED BIT(5)
|
|
#define RNG_CR_CONFIG1 GENMASK(11, 8)
|
|
#define RNG_CR_NISTC BIT(12)
|
|
#define RNG_CR_CONFIG2 GENMASK(15, 13)
|
|
#define RNG_CR_CLKDIV_SHIFT 16
|
|
#define RNG_CR_CLKDIV GENMASK(19, 16)
|
|
#define RNG_CR_CONFIG3 GENMASK(25, 20)
|
|
#define RNG_CR_CONDRST BIT(30)
|
|
#define RNG_CR_CONFLOCK BIT(31)
|
|
#define RNG_CR_ENTROPY_SRC_MASK (RNG_CR_CONFIG1 | RNG_CR_NISTC | RNG_CR_CONFIG2 | RNG_CR_CONFIG3)
|
|
#define RNG_CR_CONFIG_MASK (RNG_CR_ENTROPY_SRC_MASK | RNG_CR_CED | RNG_CR_CLKDIV)
|
|
|
|
#define RNG_SR 0x04
|
|
#define RNG_SR_DRDY BIT(0)
|
|
#define RNG_SR_CECS BIT(1)
|
|
#define RNG_SR_SECS BIT(2)
|
|
#define RNG_SR_CEIS BIT(5)
|
|
#define RNG_SR_SEIS BIT(6)
|
|
|
|
#define RNG_DR 0x08
|
|
|
|
#define RNG_NSCR 0x0C
|
|
#define RNG_NSCR_MASK GENMASK(17, 0)
|
|
|
|
#define RNG_HTCR 0x10
|
|
|
|
#define RNG_NB_RECOVER_TRIES 3
|
|
|
|
struct stm32_rng_data {
|
|
uint max_clock_rate;
|
|
u32 cr;
|
|
u32 nscr;
|
|
u32 htcr;
|
|
bool has_cond_reset;
|
|
};
|
|
|
|
/**
|
|
* struct stm32_rng_config - RNG configuration data
|
|
*
|
|
* @cr: RNG configuration. 0 means default hardware RNG configuration
|
|
* @nscr: Noise sources control configuration.
|
|
* @htcr: Health tests configuration.
|
|
*/
|
|
struct stm32_rng_config {
|
|
u32 cr;
|
|
u32 nscr;
|
|
u32 htcr;
|
|
};
|
|
|
|
struct stm32_rng_private {
|
|
struct hwrng rng;
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
struct reset_control *rst;
|
|
struct stm32_rng_config pm_conf;
|
|
const struct stm32_rng_data *data;
|
|
bool ced;
|
|
bool lock_conf;
|
|
};
|
|
|
|
/*
|
|
* Extracts from the STM32 RNG specification when RNG supports CONDRST.
|
|
*
|
|
* When a noise source (or seed) error occurs, the RNG stops generating
|
|
* random numbers and sets to “1” both SEIS and SECS bits to indicate
|
|
* that a seed error occurred. (...)
|
|
*
|
|
* 1. Software reset by writing CONDRST at 1 and at 0 (see bitfield
|
|
* description for details). This step is needed only if SECS is set.
|
|
* Indeed, when SEIS is set and SECS is cleared it means RNG performed
|
|
* the reset automatically (auto-reset).
|
|
* 2. If SECS was set in step 1 (no auto-reset) wait for CONDRST
|
|
* to be cleared in the RNG_CR register, then confirm that SEIS is
|
|
* cleared in the RNG_SR register. Otherwise just clear SEIS bit in
|
|
* the RNG_SR register.
|
|
* 3. If SECS was set in step 1 (no auto-reset) wait for SECS to be
|
|
* cleared by RNG. The random number generation is now back to normal.
|
|
*/
|
|
static int stm32_rng_conceal_seed_error_cond_reset(struct stm32_rng_private *priv)
|
|
{
|
|
struct device *dev = priv->dev;
|
|
u32 sr = readl_relaxed(priv->base + RNG_SR);
|
|
u32 cr = readl_relaxed(priv->base + RNG_CR);
|
|
int err;
|
|
|
|
if (sr & RNG_SR_SECS) {
|
|
/* Conceal by resetting the subsystem (step 1.) */
|
|
writel_relaxed(cr | RNG_CR_CONDRST, priv->base + RNG_CR);
|
|
writel_relaxed(cr & ~RNG_CR_CONDRST, priv->base + RNG_CR);
|
|
} else {
|
|
/* RNG auto-reset (step 2.) */
|
|
writel_relaxed(sr & ~RNG_SR_SEIS, priv->base + RNG_SR);
|
|
goto end;
|
|
}
|
|
|
|
err = readl_relaxed_poll_timeout_atomic(priv->base + RNG_CR, cr, !(cr & RNG_CR_CONDRST), 10,
|
|
100000);
|
|
if (err) {
|
|
dev_err(dev, "%s: timeout %x\n", __func__, sr);
|
|
return err;
|
|
}
|
|
|
|
/* Check SEIS is cleared (step 2.) */
|
|
if (readl_relaxed(priv->base + RNG_SR) & RNG_SR_SEIS)
|
|
return -EINVAL;
|
|
|
|
err = readl_relaxed_poll_timeout_atomic(priv->base + RNG_SR, sr, !(sr & RNG_SR_SECS), 10,
|
|
100000);
|
|
if (err) {
|
|
dev_err(dev, "%s: timeout %x\n", __func__, sr);
|
|
return err;
|
|
}
|
|
|
|
end:
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Extracts from the STM32 RNG specification, when CONDRST is not supported
|
|
*
|
|
* When a noise source (or seed) error occurs, the RNG stops generating
|
|
* random numbers and sets to “1” both SEIS and SECS bits to indicate
|
|
* that a seed error occurred. (...)
|
|
*
|
|
* The following sequence shall be used to fully recover from a seed
|
|
* error after the RNG initialization:
|
|
* 1. Clear the SEIS bit by writing it to “0”.
|
|
* 2. Read out 12 words from the RNG_DR register, and discard each of
|
|
* them in order to clean the pipeline.
|
|
* 3. Confirm that SEIS is still cleared. Random number generation is
|
|
* back to normal.
|
|
*/
|
|
static int stm32_rng_conceal_seed_error_sw_reset(struct stm32_rng_private *priv)
|
|
{
|
|
unsigned int i = 0;
|
|
u32 sr = readl_relaxed(priv->base + RNG_SR);
|
|
|
|
writel_relaxed(sr & ~RNG_SR_SEIS, priv->base + RNG_SR);
|
|
|
|
for (i = 12; i != 0; i--)
|
|
(void)readl_relaxed(priv->base + RNG_DR);
|
|
|
|
if (readl_relaxed(priv->base + RNG_SR) & RNG_SR_SEIS)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_rng_conceal_seed_error(struct hwrng *rng)
|
|
{
|
|
struct stm32_rng_private *priv = container_of(rng, struct stm32_rng_private, rng);
|
|
|
|
dev_dbg(priv->dev, "Concealing seed error\n");
|
|
|
|
if (priv->data->has_cond_reset)
|
|
return stm32_rng_conceal_seed_error_cond_reset(priv);
|
|
else
|
|
return stm32_rng_conceal_seed_error_sw_reset(priv);
|
|
};
|
|
|
|
|
|
static int stm32_rng_read(struct hwrng *rng, void *data, size_t max, bool wait)
|
|
{
|
|
struct stm32_rng_private *priv = container_of(rng, struct stm32_rng_private, rng);
|
|
unsigned int i = 0;
|
|
int retval = 0, err = 0;
|
|
u32 sr;
|
|
|
|
retval = pm_runtime_resume_and_get(priv->dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
if (readl_relaxed(priv->base + RNG_SR) & RNG_SR_SEIS)
|
|
stm32_rng_conceal_seed_error(rng);
|
|
|
|
while (max >= sizeof(u32)) {
|
|
sr = readl_relaxed(priv->base + RNG_SR);
|
|
/*
|
|
* Manage timeout which is based on timer and take
|
|
* care of initial delay time when enabling the RNG.
|
|
*/
|
|
if (!sr && wait) {
|
|
err = readl_relaxed_poll_timeout_atomic(priv->base
|
|
+ RNG_SR,
|
|
sr, sr,
|
|
10, 50000);
|
|
if (err) {
|
|
dev_err(priv->dev, "%s: timeout %x!\n", __func__, sr);
|
|
break;
|
|
}
|
|
} else if (!sr) {
|
|
/* The FIFO is being filled up */
|
|
break;
|
|
}
|
|
|
|
if (sr != RNG_SR_DRDY) {
|
|
if (sr & RNG_SR_SEIS) {
|
|
err = stm32_rng_conceal_seed_error(rng);
|
|
i++;
|
|
if (err && i > RNG_NB_RECOVER_TRIES) {
|
|
dev_err(priv->dev, "Couldn't recover from seed error\n");
|
|
retval = -ENOTRECOVERABLE;
|
|
goto exit_rpm;
|
|
}
|
|
|
|
continue;
|
|
}
|
|
|
|
if (WARN_ONCE((sr & RNG_SR_CEIS), "RNG clock too slow - %x\n", sr))
|
|
writel_relaxed(0, priv->base + RNG_SR);
|
|
}
|
|
|
|
/* Late seed error case: DR being 0 is an error status */
|
|
*(u32 *)data = readl_relaxed(priv->base + RNG_DR);
|
|
if (!*(u32 *)data) {
|
|
err = stm32_rng_conceal_seed_error(rng);
|
|
i++;
|
|
if (err && i > RNG_NB_RECOVER_TRIES) {
|
|
dev_err(priv->dev, "Couldn't recover from seed error");
|
|
retval = -ENOTRECOVERABLE;
|
|
goto exit_rpm;
|
|
}
|
|
|
|
continue;
|
|
}
|
|
|
|
i = 0;
|
|
retval += sizeof(u32);
|
|
data += sizeof(u32);
|
|
max -= sizeof(u32);
|
|
}
|
|
|
|
exit_rpm:
|
|
pm_runtime_mark_last_busy(priv->dev);
|
|
pm_runtime_put_sync_autosuspend(priv->dev);
|
|
|
|
return retval || !wait ? retval : -EIO;
|
|
}
|
|
|
|
static uint stm32_rng_clock_freq_restrain(struct hwrng *rng)
|
|
{
|
|
struct stm32_rng_private *priv =
|
|
container_of(rng, struct stm32_rng_private, rng);
|
|
unsigned long clock_rate = 0;
|
|
uint clock_div = 0;
|
|
|
|
clock_rate = clk_get_rate(priv->clk);
|
|
|
|
/*
|
|
* Get the exponent to apply on the CLKDIV field in RNG_CR register
|
|
* No need to handle the case when clock-div > 0xF as it is physically
|
|
* impossible
|
|
*/
|
|
while ((clock_rate >> clock_div) > priv->data->max_clock_rate)
|
|
clock_div++;
|
|
|
|
pr_debug("RNG clk rate : %lu\n", clk_get_rate(priv->clk) >> clock_div);
|
|
|
|
return clock_div;
|
|
}
|
|
|
|
static int stm32_rng_init(struct hwrng *rng)
|
|
{
|
|
struct stm32_rng_private *priv =
|
|
container_of(rng, struct stm32_rng_private, rng);
|
|
int err;
|
|
u32 reg;
|
|
|
|
err = clk_prepare_enable(priv->clk);
|
|
if (err)
|
|
return err;
|
|
|
|
/* clear error indicators */
|
|
writel_relaxed(0, priv->base + RNG_SR);
|
|
|
|
reg = readl_relaxed(priv->base + RNG_CR);
|
|
|
|
/*
|
|
* Keep default RNG configuration if none was specified.
|
|
* 0 is an invalid value as it disables all entropy sources.
|
|
*/
|
|
if (priv->data->has_cond_reset && priv->data->cr) {
|
|
uint clock_div = stm32_rng_clock_freq_restrain(rng);
|
|
|
|
reg &= ~RNG_CR_CONFIG_MASK;
|
|
reg |= RNG_CR_CONDRST | (priv->data->cr & RNG_CR_ENTROPY_SRC_MASK) |
|
|
(clock_div << RNG_CR_CLKDIV_SHIFT);
|
|
if (priv->ced)
|
|
reg &= ~RNG_CR_CED;
|
|
else
|
|
reg |= RNG_CR_CED;
|
|
writel_relaxed(reg, priv->base + RNG_CR);
|
|
|
|
/* Health tests and noise control registers */
|
|
writel_relaxed(priv->data->htcr, priv->base + RNG_HTCR);
|
|
writel_relaxed(priv->data->nscr & RNG_NSCR_MASK, priv->base + RNG_NSCR);
|
|
|
|
reg &= ~RNG_CR_CONDRST;
|
|
reg |= RNG_CR_RNGEN;
|
|
if (priv->lock_conf)
|
|
reg |= RNG_CR_CONFLOCK;
|
|
|
|
writel_relaxed(reg, priv->base + RNG_CR);
|
|
|
|
err = readl_relaxed_poll_timeout_atomic(priv->base + RNG_CR, reg,
|
|
(!(reg & RNG_CR_CONDRST)),
|
|
10, 50000);
|
|
if (err) {
|
|
clk_disable_unprepare(priv->clk);
|
|
dev_err(priv->dev, "%s: timeout %x!\n", __func__, reg);
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
/* Handle all RNG versions by checking if conditional reset should be set */
|
|
if (priv->data->has_cond_reset)
|
|
reg |= RNG_CR_CONDRST;
|
|
|
|
if (priv->ced)
|
|
reg &= ~RNG_CR_CED;
|
|
else
|
|
reg |= RNG_CR_CED;
|
|
|
|
writel_relaxed(reg, priv->base + RNG_CR);
|
|
|
|
if (priv->data->has_cond_reset)
|
|
reg &= ~RNG_CR_CONDRST;
|
|
|
|
reg |= RNG_CR_RNGEN;
|
|
|
|
writel_relaxed(reg, priv->base + RNG_CR);
|
|
}
|
|
|
|
err = readl_relaxed_poll_timeout_atomic(priv->base + RNG_SR, reg,
|
|
reg & RNG_SR_DRDY,
|
|
10, 100000);
|
|
if (err || (reg & ~RNG_SR_DRDY)) {
|
|
clk_disable_unprepare(priv->clk);
|
|
dev_err(priv->dev, "%s: timeout:%x SR: %x!\n", __func__, err, reg);
|
|
return -EINVAL;
|
|
}
|
|
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void stm32_rng_remove(struct platform_device *ofdev)
|
|
{
|
|
pm_runtime_disable(&ofdev->dev);
|
|
}
|
|
|
|
static int __maybe_unused stm32_rng_runtime_suspend(struct device *dev)
|
|
{
|
|
struct stm32_rng_private *priv = dev_get_drvdata(dev);
|
|
u32 reg;
|
|
|
|
reg = readl_relaxed(priv->base + RNG_CR);
|
|
reg &= ~RNG_CR_RNGEN;
|
|
writel_relaxed(reg, priv->base + RNG_CR);
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused stm32_rng_suspend(struct device *dev)
|
|
{
|
|
struct stm32_rng_private *priv = dev_get_drvdata(dev);
|
|
int err;
|
|
|
|
err = clk_prepare_enable(priv->clk);
|
|
if (err)
|
|
return err;
|
|
|
|
if (priv->data->has_cond_reset) {
|
|
priv->pm_conf.nscr = readl_relaxed(priv->base + RNG_NSCR);
|
|
priv->pm_conf.htcr = readl_relaxed(priv->base + RNG_HTCR);
|
|
}
|
|
|
|
/* Do not save that RNG is enabled as it will be handled at resume */
|
|
priv->pm_conf.cr = readl_relaxed(priv->base + RNG_CR) & ~RNG_CR_RNGEN;
|
|
|
|
writel_relaxed(priv->pm_conf.cr, priv->base + RNG_CR);
|
|
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused stm32_rng_runtime_resume(struct device *dev)
|
|
{
|
|
struct stm32_rng_private *priv = dev_get_drvdata(dev);
|
|
int err;
|
|
u32 reg;
|
|
|
|
err = clk_prepare_enable(priv->clk);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Clean error indications */
|
|
writel_relaxed(0, priv->base + RNG_SR);
|
|
|
|
reg = readl_relaxed(priv->base + RNG_CR);
|
|
reg |= RNG_CR_RNGEN;
|
|
writel_relaxed(reg, priv->base + RNG_CR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused stm32_rng_resume(struct device *dev)
|
|
{
|
|
struct stm32_rng_private *priv = dev_get_drvdata(dev);
|
|
int err;
|
|
u32 reg;
|
|
|
|
err = clk_prepare_enable(priv->clk);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Clean error indications */
|
|
writel_relaxed(0, priv->base + RNG_SR);
|
|
|
|
if (priv->data->has_cond_reset) {
|
|
/*
|
|
* Correct configuration in bits [29:4] must be set in the same
|
|
* access that set RNG_CR_CONDRST bit. Else config setting is
|
|
* not taken into account. CONFIGLOCK bit must also be unset but
|
|
* it is not handled at the moment.
|
|
*/
|
|
writel_relaxed(priv->pm_conf.cr | RNG_CR_CONDRST, priv->base + RNG_CR);
|
|
|
|
writel_relaxed(priv->pm_conf.nscr, priv->base + RNG_NSCR);
|
|
writel_relaxed(priv->pm_conf.htcr, priv->base + RNG_HTCR);
|
|
|
|
reg = readl_relaxed(priv->base + RNG_CR);
|
|
reg |= RNG_CR_RNGEN;
|
|
reg &= ~RNG_CR_CONDRST;
|
|
writel_relaxed(reg, priv->base + RNG_CR);
|
|
|
|
err = readl_relaxed_poll_timeout_atomic(priv->base + RNG_CR, reg,
|
|
reg & ~RNG_CR_CONDRST, 10, 100000);
|
|
|
|
if (err) {
|
|
clk_disable_unprepare(priv->clk);
|
|
dev_err(priv->dev, "%s: timeout:%x CR: %x!\n", __func__, err, reg);
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
reg = priv->pm_conf.cr;
|
|
reg |= RNG_CR_RNGEN;
|
|
writel_relaxed(reg, priv->base + RNG_CR);
|
|
}
|
|
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops __maybe_unused stm32_rng_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(stm32_rng_runtime_suspend,
|
|
stm32_rng_runtime_resume, NULL)
|
|
SET_SYSTEM_SLEEP_PM_OPS(stm32_rng_suspend,
|
|
stm32_rng_resume)
|
|
};
|
|
|
|
static const struct stm32_rng_data stm32mp13_rng_data = {
|
|
.has_cond_reset = true,
|
|
.max_clock_rate = 48000000,
|
|
.cr = 0x00F00D00,
|
|
.nscr = 0x2B5BB,
|
|
.htcr = 0x969D,
|
|
};
|
|
|
|
static const struct stm32_rng_data stm32_rng_data = {
|
|
.has_cond_reset = false,
|
|
.max_clock_rate = 3000000,
|
|
};
|
|
|
|
static const struct of_device_id stm32_rng_match[] = {
|
|
{
|
|
.compatible = "st,stm32mp13-rng",
|
|
.data = &stm32mp13_rng_data,
|
|
},
|
|
{
|
|
.compatible = "st,stm32-rng",
|
|
.data = &stm32_rng_data,
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, stm32_rng_match);
|
|
|
|
static int stm32_rng_probe(struct platform_device *ofdev)
|
|
{
|
|
struct device *dev = &ofdev->dev;
|
|
struct device_node *np = ofdev->dev.of_node;
|
|
struct stm32_rng_private *priv;
|
|
struct resource *res;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->base = devm_platform_get_and_ioremap_resource(ofdev, 0, &res);
|
|
if (IS_ERR(priv->base))
|
|
return PTR_ERR(priv->base);
|
|
|
|
priv->clk = devm_clk_get(&ofdev->dev, NULL);
|
|
if (IS_ERR(priv->clk))
|
|
return PTR_ERR(priv->clk);
|
|
|
|
priv->rst = devm_reset_control_get(&ofdev->dev, NULL);
|
|
if (!IS_ERR(priv->rst)) {
|
|
reset_control_assert(priv->rst);
|
|
udelay(2);
|
|
reset_control_deassert(priv->rst);
|
|
}
|
|
|
|
priv->ced = of_property_read_bool(np, "clock-error-detect");
|
|
priv->lock_conf = of_property_read_bool(np, "st,rng-lock-conf");
|
|
priv->dev = dev;
|
|
|
|
priv->data = of_device_get_match_data(dev);
|
|
if (!priv->data)
|
|
return -ENODEV;
|
|
|
|
dev_set_drvdata(dev, priv);
|
|
|
|
priv->rng.name = dev_driver_string(dev);
|
|
priv->rng.init = stm32_rng_init;
|
|
priv->rng.read = stm32_rng_read;
|
|
priv->rng.quality = 900;
|
|
|
|
pm_runtime_set_autosuspend_delay(dev, 100);
|
|
pm_runtime_use_autosuspend(dev);
|
|
pm_runtime_enable(dev);
|
|
|
|
return devm_hwrng_register(dev, &priv->rng);
|
|
}
|
|
|
|
static struct platform_driver stm32_rng_driver = {
|
|
.driver = {
|
|
.name = "stm32-rng",
|
|
.pm = pm_ptr(&stm32_rng_pm_ops),
|
|
.of_match_table = stm32_rng_match,
|
|
},
|
|
.probe = stm32_rng_probe,
|
|
.remove_new = stm32_rng_remove,
|
|
};
|
|
|
|
module_platform_driver(stm32_rng_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Daniel Thompson <daniel.thompson@linaro.org>");
|
|
MODULE_DESCRIPTION("STMicroelectronics STM32 RNG device driver");
|