Commit graph

246 commits

Author SHA1 Message Date
Clemens Ladisch
aa4790a628 hwmon: (k10temp) add support for AMD Family 12h/14h CPUs
Add the PCI ID to support the internal temperature sensor of the
AMD "Llano" and "Brazos" processor families.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@kernel.org # ca86828: x86, AMD, PCI: Add AMD northbridge PCI device
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-18 06:14:24 -08:00
Clemens Ladisch
2c6315da6a hwmon: (jc42) do not allow writing to locked registers
On systems where the temperature sensor is actually used, the BIOS is
likely to have locked the alarm registers.  In that case, all writes
through the corresponding sysfs files would be silently ignored.

To prevent this, detect the locks and make the affected sysfs files
read-only.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-16 08:18:33 -08:00
Clemens Ladisch
d5622f5b6c hwmon: (jc42) more helpful documentation
The documentation lists standard numbers and chip names in excruciating
detail, but that's all it does.  To help mere mortals in deciding
whether to enable this driver, mention what this sensor is for and in
which systems it might be found.

Also add a link to the actual JC 42.4 specification.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-16 08:18:32 -08:00
Guenter Roeck
c7bf71c517 hwmon: (lm93) Add support for LM94
This patch adds basic support for LM94 to the LM93 driver. LM94 specific
sensors and features are not supported.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-01-18 12:22:54 -08:00
Juerg Haefliger
d4b94e1fa6 hwmon: (dme1737) Add support for in7 for SCH5127
Add support for the 1.5V voltage monitoring input (in7) of the
SMSC SCH5127 chip.

Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:13 +01:00
Jean Delvare
3ea1bd58b9 hwmon: (w83627hf) Document W83627THF voltage pin mapping
I had to look it up for one user, so we might as well store it in the
driver documentation.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-12 21:55:11 +01:00
Jean Delvare
a516dc3e9b hwmon: (w83793) Implement the standard intrusion detection interface
We have a standard intrusion detection interface now, drivers should
implement it. I've left the old interface in place for the time being,
with a deprecation warning, it will be removed later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-12 21:55:10 +01:00
Jean Delvare
0de2b24480 hwmon: (adm9240) Implement the standard intrusion detection interface
We have a standard intrusion detection interface now, drivers should
implement it. I've left the old interface in place for the time being,
with a deprecation warning, it will be removed later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-12 21:55:09 +01:00
Steven Hardy
5d84291da3 hwmon: (ads7828) Update email contact details
Trivial patch updating my email contact details due to change of
employer, and because I no longer have access to the previously used
domain.

Unfortunately I also no longer have access to any ads7828 hardware, but
am happy to support/maintain the driver if others are able to test
changes.

Signed-off-by: Steve Hardy <shardy@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:08 +01:00
Roland Stigge
6099469805 hwmon: Support for Dallas Semiconductor DS620
Driver for Dallas Semiconductor DS620 temperature sensor and thermostat

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-09 09:10:10 -08:00
Urs Fleisch
430400b863 hwmon: driver for Sensirion SHT21 humidity and temperature sensor
Signed-off-by: Urs Fleisch <urs.fleisch@sensirion.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:56:28 -08:00
Guenter Roeck
c6c2c1636e hwmon: Add humidity attribute to sysfs ABI
The humidity attribute is already supported by the sht15 driver, and another
driver supporting it is about to be added. Make it official.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-01-08 10:56:27 -08:00
Guenter Roeck
581693b51e hwmon: sysfs ABI updates
Add attributes supported by various PMBus devices to hwmon sysfs ABI.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:49 -08:00
Hans J. Koch
f99e0e98f9 Documentation: change email address for Hans Koch
My old mail address doesn't exist anymore. This changes all occurrences
to my new address.

Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-18 15:00:46 -08:00
Jean Delvare
44c1bcd4bc hwmon: (it87) Add support for the IT8721F/IT8758E
Add support for the IT8721F/IT8758E. These new chips differ from the
older IT87xxF chips in the following ways:
* ADC LSB is 12 mV instead of 16 mV.
* PWM values are 8-bit instead of 7-bit.
There are other minor changes we don't have to care about in the
driver.

Another change is that we will handle internal voltage scaling in the
driver instead of delegating the work to user-space.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:51 +02:00
Jean Delvare
f6c61cff8b hwmon: (lm85) Add support for ADT7468 high-frequency PWM mode
The ADT7468 supports a high-frequency PWM output mode where all PWM
outputs are driven by a 22.5 kHz clock. Add support for this mode, and
document it, as it may surprise the user that setting one PWM output
frequency also affects the other PWM outputs.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:50 +02:00
Jean Delvare
c36364dbf3 hwmon: (lm85) Document the ADT7468 as supported
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:50 +02:00
Jean Delvare
6dfee85397 hwmon: (pcf8591) Don't attempt to detect devices
The PCF8591 can't be detected, don't even try. There are plenty of
other means to instantiate i2c devices these days.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
2010-10-28 20:31:50 +02:00
Jean Delvare
c4f99a2b8f hwmon: (lm90) Add support for the W83L771W/G
I was wondering if that chip ever existed publicly... Apparently yes,
so add support for it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:44 +02:00
Guenter Roeck
06e1c0a216 hwmon: (lm90) Add support for max6695 and max6696
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
6948708dd0 hwmon: (lm90) Add support for extra features of max6659
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
13c84951a3 hwmon: (lm90) Add explicit support for max6659
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
28e7438faa hwmon: Add tempX_emergency attribute to sysfs ABI
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:42 +02:00
Guenter Roeck
e5f5c99a39 hwmon: LTC4261 Hardware monitoring driver
This driver adds support for Linear Technology LTC4261 I2C Negative
Voltage Hot Swap Controller.

Reviewed-by: Ira W. Snyder <iws@ovro.caltech.edu>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25 14:11:20 -07:00
Guenter Roeck
a51b9944a1 hwmon: (adm1031) Replace update_rate sysfs attribute with update_interval
The attribute reflects an interval, not a rate.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-17 17:24:14 +02:00
Andrew Morton
f2e41e9103 revert "hwmon: f71882fg: add support for the Fintek F71808E"
Revert commit 7721fea3d0 ("hwmon:
f71882fg: add support for the Fintek F71808E").

Hans said:

: A second review after I've received a data sheet for this device from
: Fintek has turned up a few bugs.
:
: Unfortunately Giel (nor I) have time to fix this in time for the 2.6.36
: cycle.  Therefor I would like to see this patch reverted as not having any
: support for the hwmon function of this superio chip is better then having
: unreliable support.

Cc: Giel van Schijndel <me@mortis.eu>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-20 09:34:55 -07:00
Jean Delvare
008e5f3350 hwmon: (pc87427) Add temperature monitoring support
Add support for the 6 temperature monitoring channels of the PC87427.
Note that the sensors resolution can vary, and I couldn't find a way
to figure it out, so we might have to compensate in user-space.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-08-14 21:08:59 +02:00
Jean Delvare
328716bc16 hwmon: (pc87427) Add support for manual fan speed control
Add initial support for PWM outputs of the PC87427 Super-I/O chip.
Only mode change and manual fan speed control are supported. Automatic
mode configuration isn't supported, and won't be until at least one
board is known, which makes uses of the PWM outputs.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-08-14 21:08:58 +02:00
Guenter Roeck
c39aedafb2 hwmon: (w83627ehf) Add support for W83667HG-B
Add support for W83667HG-B (very similar to the W83667HG).

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14 21:08:55 +02:00
Steve Glendinning
9df7305b5a hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller
SMSC's EMC2103 family of temperature/fan controllers have 1
onboard and up to 3 external temperature sensors, and allow
closed-loop control of one fan.  This patch adds support for
them.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14 21:08:54 +02:00
Jean Delvare
5a9c2cd881 hwmon: Remove in[0-*]_fault from sysfs-interface
Fault files are for hardware failures that can be reported. So far
we've seen chips reporting such failures for temperature sensors and
fans, but not for voltages. Remove in[0-*]_fault for now. It can be
added back later if really needed, but I doubt it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-08-14 21:08:54 +02:00
Guenter Roeck
e04a715e4e hwmon: Add 4 current alarm/beep attributes to sysfs-interface
Add currX_alarm, currX_min_alarm, currX_max_alarm and currX_beep
attributes to the hwmon sysfs API.

currX_min_alarm and currX_max_alarm are already supported by the LTC4215
and LTC4245 drivers. currX_alarm is supported by the LTC4261 driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14 21:08:53 +02:00
Guenter Roeck
f46fc8cd38 hwmon: Add 3 critical limit attributes to sysfs-interface
Added _lcrit and _crit to voltage attributes. 
Added _lcrit to temperature attributes.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14 21:08:52 +02:00
Ira W. Snyder
5950ec8d3e hwmon: (ltc4245) Expose all GPIO pins as analog voltages
Add support for exposing all GPIO pins as analog voltages. Though this is
not an ideal use of the chip, some hardware engineers may decide that the
LTC4245 meets their design requirements when studying the datasheet.

The GPIO pins are sampled in round-robin fashion, meaning that a slow
reader will see stale data. A userspace application can detect this,
because it will get -EAGAIN when reading from a sysfs file which contains
stale data.

Users can choose to use this feature on a per-chip basis by using either
platform data or the OF device tree (where applicable).

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14 21:08:49 +02:00
Giel van Schijndel
7721fea3d0 hwmon: f71882fg: add support for the Fintek F71808E
Allow device probing to recognise the Fintek F71808E.

Sysfs interface:
 * Fan/pwm control is the same as for F71889FG
 * Temperature and voltage sensor handling is largely the same as for
   the F71889FG
  - Has one temperature sensor less (doesn't have temp3)
  - Misses one voltage sensor (doesn't have V6, thus in6_input refers to
    what in7_input refers for F71889FG)

For the purpose of the sysfs interface fxxxx_in_temp_attr[] is split up
such that it can largely be reused.

Signed-off-by: Giel van Schijndel <me@mortis.eu>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:10 -07:00
Chen Gong
f3cffe4d1a hwmon: coretemp: documentation update and cleanup
Update coretemp supported CPU TjMax lists and some cleanup work.

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:10 -07:00
Guenter Roeck
4453d7364d hwmon: add support for JEDEC JC 42.4 compliant temperature sensors
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:10 -07:00
Guenter Roeck
920fa1ffce hwmon: driver for SMM665 Six-Channel Active DC Output Controller/Monitor
This driver adds support for the monitoring features of the Summit
Microelectronics SMM665 Six-Channel Active DC Output Controller/Monitor.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:10 -07:00
Linus Torvalds
a5e11599da Merge branch 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hwmon: Package Level Thermal/Power: pkgtemp documentation
  x86, hwmon: Package Level Thermal/Power: power limit
  x86, hwmon: Package Level Thermal/Power: thermal throttling handler
  x86, hwmon: Package Level Thermal/Power: pkgtemp hwmon driver
2010-08-06 10:02:58 -07:00
Justin P. Mattock
0ea6e61122 Documentation: update broken web addresses.
Below you will find an updated version from the original series bunching all patches into one big patch
updating broken web addresses that are located in Documentation/*
Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult,
the best way to deal with these is to use web.archive.org to locate these addresses that are outdated.
Now there are also some addresses pointing to .spec files some are located, but some(after searching
on the companies site)where still no where to be found. In this case I just changed the address
to the company site this way the users can contact the company and they can locate them for the users.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Cc: Paulo Marques <pmarques@grupopie.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Michael Neuling <mikey@neuling.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-04 15:21:40 +02:00
Fenghua Yu
a3159864f2 x86, hwmon: Package Level Thermal/Power: pkgtemp documentation
Document for package level thermal hwmon driver.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
LKML-Reference: <1280448826-12004-6-git-send-email-fenghua.yu@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-08-03 15:58:56 -07:00
Pavel Machek
a2531293db update email address
pavel@suse.cz no longer works, replace it with working address.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-19 10:56:54 +02:00
Ira W. Snyder
df16dd53c5 hwmon: (ltc4245) Read only one GPIO pin
Read only one of the GPIO pins as an analog voltage. The ADC can be
switched to a different GPIO pin at runtime, but this is not supported.

Previously, this driver would report the analog voltage of the currently
selected GPIO pin as all three GPIO voltages: in9_input, in10_input and
in11_input.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
2010-05-27 19:59:02 +02:00
Juerg Haefliger
ea694431f9 hwmon: (dme1737) Add SCH5127 support
Add support for the hardware monitoring capabilities of the SCH5127
chip to the dme1737 driver.

Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Jeff Rickman <jrickman@myamigos.us>
2010-05-27 19:59:01 +02:00
Jean Delvare
cff37c9e82 hwmon: (tmp102) Various fixes
Fixes from my driver review:
http://lists.lm-sensors.org/pipermail/lm-sensors/2010-March/028051.html

Only the small changes are in there, more important changes will come
later separately as time permits.

* Drop the remnants of the now gone detect function
* The TMP102 has no known compatible chip
* Include the right header files
* Clarify why byte swapping of register values is needed
* Strip resolution info bit from temperature register value
* Set cache lifetime to 1/3 second
* Don't arbitrarily reject limit values; clamp as needed
* Make limit writing unconditional
* Don't check for transaction types the driver doesn't use
* Properly check for error when setting configuration
* Report error on failed probe
* Make the driver load automatically where needed
* Various other minor fixes

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Steven King <sfking@fdwdc.com>
2010-05-27 19:58:57 +02:00
Steven King
beb1b6bbf2 hwmon: Driver for TI TMP102 temperature sensor
Driver for the TI TMP102.

The TI TMP102 is similar to the LM75.  It differs from the LM75 by
having a 16-bit conf register and the temp registers have a minimum
resolution of 12 bits; the extended conf register can select 13-bit
resolution (which this driver does) and also change the update rate
(which this driver currently doesn't use).

[JD: Fix tmp102_exit tag, must be __exit, not __init.]

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-27 19:58:56 +02:00
Ira W. Snyder
d2b847d489 hwmon: Add description of the update_rate sysfs attribute
The update_rate attribute can be used by drivers to let userspace choose
the update rate of the chip, if it is configurable.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-27 19:58:45 +02:00
Matthew Garrett
10f2ed31aa hwmon: (lm63) Add basic support for LM64
The LM64 appears to be an LM63 with added GPIO lines. Add support for the
hwmon functionality - GPIO can be added at some later stage if someone
has a need for them.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-27 19:58:38 +02:00
Francis Galiegue
a33f32244d Documentation/: it's -> its where appropriate
Fix obvious cases of "it's" being used when "its" was meant.

Signed-off-by: Francis Galiegue <fgaliegue@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-23 02:09:52 +02:00
Jiri Kosina
318ae2edc3 Merge branch 'for-next' into for-linus
Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c
2010-03-08 16:55:37 +01:00