On some Lunar Lake pre-production systems, not all the MSI thermal
vectors are valid. In that case instead of failing module load, continue
with partial thermal interrupt support.
pci_alloc_irq_vectors() can return less than expected maximum vectors.
In that case call devm_request_threaded_irq() only for current maximum
vectors.
Fixes: 7a9a8c5faf ("thermal: intel: int340x: Support MSI interrupt for Lunar Lake")
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Tested-by: Yijun Shen <Yijun.Shen@dell.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/20240723140228.865919-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On some pre-production Lunar Lake systems, there is a kernel
warning:
remove_proc_entry: removing non-empty directory 'irq/172'
WARNING: CPU: 0 PID: 501 at fs/proc/generic.c:717
remove_proc_entry+0x1b4/0x1e0
...
...
remove_proc_entry+0x1b4/0x1e0
report_bug+0x182/0x1b0
handle_bug+0x51/0xa0
exc_invalid_op+0x18/0x80
asm_exc_invalid_op+0x1b/0x20
remove_proc_entry+0x1b4/0x1e0
remove_proc_entry+0x1b4/0x1e0
unregister_irq_proc+0xf2/0x120
free_desc+0x41/0xe0
irq_domain_free_irqs+0x138/0x1c0
irq_free_descs+0x52/0x80
irq_domain_free_irqs+0x151/0x1c0
msi_domain_free_locked.part.0+0x17e/0x1c0
msi_domain_free_irqs_all_locked+0x74/0xc0
pci_msi_teardown_msi_irqs+0x50/0x60
pci_free_msi_irqs+0x12/0x40
pci_free_irq_vectors+0x58/0x70
On these systems, not all the MSI thermal vectors are valid. This causes
devm_request_threaded_irq() to fail for some vectors. As part of the
clean up on this error, pci_free_irq_vectors() is called without calling
devm_free_irq(). This causes the above warning.
Add a function proc_thermal_free_msi() to call devm_free_irq() for all
successfully registered IRQ handlers, then call pci_free_irq_vectors().
Call this function for MSI cleanup.
Fixes: 7a9a8c5faf ("thermal: intel: int340x: Support MSI interrupt for Lunar Lake")
Reported-by: Yijun Shen <Yijun.shen@dell.com>
Tested-by: Yijun Shen <Yijun.shen@dell.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/20240723140228.865919-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge updates of Intel thermal drivers for 6.11-rc1:
- Switch Intel thermal drivers to new Intel CPU model defines (Tony
Luck).
- Clean up the int3400 and int3403 drivers (Erick Archer and David Alan
Gilbert).
- Improve intel_pch_thermal kernel log messages printed during suspend
to idle (Zhang Rui).
- Make the intel_tcc_cooling driver use a model-specific bitmask for
TCC offset (Ricardo Neri).
- Add DLVR and MSI interrupt support for the Lunar Lake platform to the
int340x thermal driver (Srinivas Pandruvada).
- Enable workload type hints (WLT) support and power floor interrupt
support for the Lunar Lake platform in int340x ((Srinivas Pandruvada).
- Make the HFI thermal driver use package scope for HFI instances as
per the Intel SDM (Zhang Rui).
* thermal-intel:
thermal: intel: hfi: Give HFI instances package scope
thermal: intel: int340x: Enable WLT and power floor support for Lunar Lake
thermal: intel: int340x: Support MSI interrupt for Lunar Lake
thermal: intel: int340x: Remove unnecessary calls to free irq
thermal: intel: int340x: Add DLVR support for Lunar Lake
thermal: intel: int340x: Capability to map user space to firmware values
thermal: intel: int340x: Cleanup of DLVR sysfs on driver remove
thermal: intel: intel_tcc_cooling: Use a model-specific bitmask for TCC offset
thermal: intel: intel_tcc: Add model checks for temperature registers
thermal: intel: intel_pch: Improve cooling log
thermal: int3403: remove unused struct 'int3403_performance_state'
thermal: int3400: Use sizeof(*pointer) instead of sizeof(type)
thermal: intel: intel_soc_dts_thermal: Switch to new Intel CPU model defines
thermal: intel: intel_tcc_cooling: Switch to new Intel CPU model defines
Out of several drivers implementing the .set_trip_temp() thermal zone
operation, three don't actually use the trip ID argument passed to it,
two call __thermal_zone_get_trip() to get a struct thermal_trip
corresponding to the given trip ID, and the other use the trip ID as an
index into their own data structures with the assumption that it will
always match the ordering of entries in the trips table passed to the
core during thermal zone registration, which is fragile and not really
guaranteed.
Even though the trip IDs used by the core are in fact their indices in the
trips table passed to it by the thermal zone creator, that is purely a
matter of convenience and should not be relied on for correctness.
For this reason, modify trip_point_temp_store() to pass a (const) trip
pointer to .set_trip_temp() and adjust the drivers implementing it
accordingly.
This helps to simplify the drivers invoking __thermal_zone_get_trip()
from their .set_trip_temp() callback functions because they will not
need to do it now and the other drivers can store their internal
trip indices in the priv field in struct thermal_trip and their
.set_trip_temp() callback functions can get those indices from there.
The intel_quark_dts thermal driver can instead use the trip type to
determine the requisite trip index.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8392906.T7Z3S40VBb@rjwysocki.net
[ rjw: Add missing colon and 2 empty code lines ]
[ rjw: Add missing change in imx_thermal.c and adjust the changelog ]
[ rjw: Drop an unused local variable ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Intel Software Developer's Manual defines the scope of HFI (registers
and memory buffer) as a package. Use package scope(*) in the software
representation of an HFI instance.
Using die scope in HFI instances has the effect of creating multiple
conflicting instances for the same package: each instance allocates its
own memory buffer and configures the same package-level registers.
Specifically, only one of the allocated memory buffers can be set in the
MSR_IA32_HW_FEEDBACK_PTR register. CPUs get incorrect HFI data from the
table.
The problem does not affect current HFI-capable platforms because they
all have single-die processors.
(*) We used die scope for HFI instances because there had been
processors with packages enumerated as dies. None of those systems
supported HFI, though. If such a system emerged, it would need to
be quirked.
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://patch.msgid.link/20240703055445.125362-1-rui.zhang@intel.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some drivers will need to store integers in the priv field of struct
thermal_trip, so add conversion macros for doing this in a consistent
way and switch over the int340x_thermal driver that already does it and
uses custom conversion functions to using the new macros.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3297884.aeNJFYEL58@rjwysocki.net
The legacy PCI interrupt is no longer supported for processor thermal
device on Lunar Lake. The support is via MSI.
Add feature PROC_THERMAL_FEATURE_MSI_SUPPORT to support MSI feature per
generation. Define this feature for Lunar Lake processors.
There are 4 MSI sources:
0 - Package thermal
1 - DDR Thermal
2 - Power floor interrupt
3 - Workload type hint
On interrupt, check the source and call the corresponding handler.
Here don't need to call proc_thermal_check_wt_intr() and
proc_thermal_check_power_floor_intr() to check if the interrupt is for
those sources as there is a dedicated MSI interrupt.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20240619172109.497639-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support for DLVR (Digital Linear Voltage Regulator) for Lunar Lake.
There are no new sysfs attributes or difference in operation compared
to prior generations.
MMIO offset and bit positions are changed compared to Meteor Lake
processors. Also for two attributes dlvr_frequency_mhz and
dlvr_frequency_select, the value presented or accepted by the firmware
is not raw frequency value but an index.
For example:
RFI_FREQ_SELECT and RFI_FREQ
: 0 DLVR freq point 2227.2 MHz
: 1 DLVR freq point 2140 MHz
Hence create a mapping table for Lunar Lake to map user space values
to the firmware accepted values.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20240619124600.491168-4-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To ensure compatibility between user inputs and firmware requirements,
a conversion mechanism is necessary for certain attributes. For instance,
on some platforms, the DLVR frequency must be translated into a predefined
index before being communicated to the firmware. On Lunar Lake platform:
RFI_FREQ_SELECT and RFI_FREQ:
Index 0 corresponds to a DLVR frequency of 2227.2 MHz
Index 1 corresponds to a DLVR frequency of 2140 MHz
Introduce a feature that enables the conversion of values between user
space inputs and firmware-accepted formats. This feature would also
facilitate the reverse process, converting firmware values back into user
friendly display values.
To support this functionality, a model-specific mapping table will be
utilized. When available, this table will provide the necessary
translations between user space values and firmware values, ensuring
seamless communication and accurate settings.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20240619124600.491168-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When only DLVR enabled without DVFS, during driver remove,
proc_thermal_rfim_remove() is not called. Hence the DLVR sysfs is not
deleted.
On Lunar Lake DLVR is enabled without DVFS, hence this issue can be
reproduced.
Check also PROC_THERMAL_FEATURE_DLVR to call proc_thermal_rfim_remove().
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20240619124600.491168-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The TCC offset field in the register MSR_TEMPERATURE_TARGET is not
architectural. The TCC library provides a model-specific bitmask. Use it to
determine the maximum TCC offset.
Suggested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://patch.msgid.link/20240614211606.5896-3-ricardo.neri-calderon@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The register MSR_TEMPERATURE_TARGET is not architectural. Its fields may be
defined differently for each processor model. TCC_OFFSET is an example of
such case.
Despite being specified as architectural, the registers IA32_[PACKAGE]_
THERM_STATUS have become model-specific: in recent processors, the
digital temperature readout uses bits [23:16] whereas the Intel Software
Developer's manual specifies bits [22:16].
Create an array of processor models and their bitmasks for TCC_OFFSET and
the digital temperature readout fields. Do not include recent processors.
Instead, use the bitmasks of these recent processors as default.
Use these model-specific bitmasks when reading TCC_OFFSET or the
temperature sensors.
Initialize a model-specific data structure during subsys_initcall() to
have it ready when thermal drivers are loaded.
Expose the new interface intel_tcc_get_offset_mask(). The
intel_tcc_cooling driver will use it.
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://patch.msgid.link/20240614211606.5896-2-ricardo.neri-calderon@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On some systems the processor thermal device interrupt is shared with
other PCI devices. In this case return IRQ_NONE from the interrupt
handler when the interrupt is not for the processor thermal device.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: f0658708e8 ("thermal: int340x: processor_thermal: Use non MSI interrupts by default")
Cc: 6.7+ <stable@vger.kernel.org> # 6.7+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The intel_pch_thermal cooling mechanism currently only provides one of
the following final conclusions:
1. intel_pch_thermal 0000:00:12.0: CPU-PCH is cool [48C]
2. intel_pch_thermal 0000:00:12.0: CPU-PCH is cool [49C] after 30700 ms delay
3. intel_pch_thermal 0000:00:12.0: CPU-PCH is hot [60C] after 60000 ms delay. S0ix might fail
4. intel_pch_thermal 0000:00:12.0: Wakeup event detected, abort cooling
This does not provide sufficient context about what is happening,
especially for case 4.
Add one line log to indicate when PCH overheats and the cooling delay
has started.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
'int3403_performance_state' has never been used since the original
commit 4384b8fe16 ("Thermal: introduce int3403 thermal driver").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is preferred to use sizeof(*pointer) instead of sizeof(type)
due to the type of the variable can change and one needs not
change the former (unlike the latter). This patch has no effect
on runtime behavior.
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in here
are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally.
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3+hQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylfTwCfUyHWkDZuZ7ehdtjzfmcd4EKZBK8An3AAV99G
ox8PXMxuFTaUEdT/69FQ
=2sEo
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in
here are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Fix a typo in the description of device_get_child_node_count()
kernfs: mount: Remove unnecessary ‘NULL’ values from knparent
scsi: Use device_show_string() helper for sysfs attributes
platform/x86: Use device_show_string() helper for sysfs attributes
perf: Use device_show_string() helper for sysfs attributes
IB/qib: Use device_show_string() helper for sysfs attributes
hwmon: Use device_show_string() helper for sysfs attributes
driver core: Add device_show_string() helper for sysfs attributes
treewide: Use sysfs_bin_attr_simple_read() helper
sysfs: Add sysfs_bin_attr_simple_read() helper
module: don't ignore sysfs_create_link() failures
driver core: Remove unused platform_notify, platform_notify_remove
- Add EINJ CXL error types to actbl1.h (Ben Cheatham).
- Add support for RAS2 table to ACPICA (Shiju Jose).
- Fix various spelling mistakes in text files and code comments in
ACPICA (Colin Ian King).
- Fix spelling and typos in ACPICA (Saket Dumbre).
- Modify ACPI_OBJECT_COMMON_HEADER (lijun).
- Add RISC-V RINTC affinity structure support to ACPICA (Haibo Xu).
- Fix CXL 3.0 structure (RDPAS) in the CEDT table (Hojin Nam).
- Add missin increment of registered GPE count to ACPICA (Daniil
Tatianin).
- Mark new ACPICA release 20240322 (Saket Dumbre).
- Add support for the AEST V2 table to ACPICA (Ruidong Tian).
- Disable -Wstringop-truncation for some ACPICA code in the kernel to
avoid a compiler warning that is not very useful (Arnd Bergmann).
- Make the kernel indicate support for several ACPI features that are
in fact supported to the platform firmware through _OSC and fix the
Generic Initiator Affinity _OSC bit (Armin Wolf).
- Make the ACPI core set the owner value for ACPI drivers, drop the
owner setting from a number of drivers and eliminate the owner
field from struct acpi_driver (Krzysztof Kozlowski).
- Rearrange fields in several structures to effectively eliminate
computations from container_of() in some cases (Andy Shevchenko).
- Do some assorted cleanups of the ACPI device enumeration code (Andy
Shevchenko).
- Make the ACPI device enumeration code skip devices with _STA values
clearly identified by the specification as invalid (Rafael Wysocki).
- Rework the handling of the NHLT table to simplify and clarify it and
drop some obsolete pieces (Cezary Rojewski).
- Add ACPI IRQ override quirks for Asus Vivobook Pro N6506MV, TongFang
GXxHRXx and GMxHGxx, and XMG APEX 17 M23 (Guenter Schafranek, Tamim
Khan, Christoffer Sandberg).
- Add reference to UEFI DSD Guide to the documentation related to the
ACPI handling of device properties (Sakari Ailus).
- Fix SRAT lookup of CFMWS ranges with numa_fill_memblks(), remove
lefover architecture-dependent code from the ACPI NUMA handling code
and simplify it on top of that (Robert Richter).
- Add a num-cs device property to specify the number of chip selects
for Intel Braswell to the ACPI LPSS (Intel SoC) driver and remove a
nested CONFIG_PM #ifdef from it (Andy Shevchenko).
- Move three x86-specific ACPI files to the x86 directory (Andy
Shevchenko).
- Mark SMO8810 accel on Dell XPS 15 9550 as always present and add a
PNP_UART1_SKIP quirk for Lenovo Blade2 tablets (Hans de Goede).
- Move acpi_blacklisted() declaration to asm/acpi.h (Kuppuswamy
Sathyanarayanan).
- Add Lunar Lake support to the ACPI DPTF driver (Sumeet Pawnikar).
- Mark the einj_driver driver's remove callback as __exit because it
cannot get unbound via sysfs (Uwe Kleine-König).
- Fix a typo in the ACPI documentation regarding the layout of sysfs
subdirectory representing the ACPI namespace (John Watts).
- Make the ACPI pfrut utility print the update_cap field during
capability query (Chen Yu).
- Add HAS_IOPORT dependencies to PNP (Niklas Schnelle).
-----BEGIN PGP SIGNATURE-----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=UiEQ
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These are ACPICA updates coming from the 20240322 release upstream, an
ACPI DPTF driver update adding new platform support for it, some new
quirks and some assorted fixes and cleanups.
Specifics:
- Add EINJ CXL error types to actbl1.h (Ben Cheatham)
- Add support for RAS2 table to ACPICA (Shiju Jose)
- Fix various spelling mistakes in text files and code comments in
ACPICA (Colin Ian King)
- Fix spelling and typos in ACPICA (Saket Dumbre)
- Modify ACPI_OBJECT_COMMON_HEADER (lijun)
- Add RISC-V RINTC affinity structure support to ACPICA (Haibo Xu)
- Fix CXL 3.0 structure (RDPAS) in the CEDT table (Hojin Nam)
- Add missin increment of registered GPE count to ACPICA (Daniil
Tatianin)
- Mark new ACPICA release 20240322 (Saket Dumbre)
- Add support for the AEST V2 table to ACPICA (Ruidong Tian)
- Disable -Wstringop-truncation for some ACPICA code in the kernel to
avoid a compiler warning that is not very useful (Arnd Bergmann)
- Make the kernel indicate support for several ACPI features that are
in fact supported to the platform firmware through _OSC and fix the
Generic Initiator Affinity _OSC bit (Armin Wolf)
- Make the ACPI core set the owner value for ACPI drivers, drop the
owner setting from a number of drivers and eliminate the owner
field from struct acpi_driver (Krzysztof Kozlowski)
- Rearrange fields in several structures to effectively eliminate
computations from container_of() in some cases (Andy Shevchenko)
- Do some assorted cleanups of the ACPI device enumeration code (Andy
Shevchenko)
- Make the ACPI device enumeration code skip devices with _STA values
clearly identified by the specification as invalid (Rafael Wysocki)
- Rework the handling of the NHLT table to simplify and clarify it
and drop some obsolete pieces (Cezary Rojewski)
- Add ACPI IRQ override quirks for Asus Vivobook Pro N6506MV,
TongFang GXxHRXx and GMxHGxx, and XMG APEX 17 M23 (Guenter
Schafranek, Tamim Khan, Christoffer Sandberg)
- Add reference to UEFI DSD Guide to the documentation related to the
ACPI handling of device properties (Sakari Ailus)
- Fix SRAT lookup of CFMWS ranges with numa_fill_memblks(), remove
lefover architecture-dependent code from the ACPI NUMA handling
code and simplify it on top of that (Robert Richter)
- Add a num-cs device property to specify the number of chip selects
for Intel Braswell to the ACPI LPSS (Intel SoC) driver and remove a
nested CONFIG_PM #ifdef from it (Andy Shevchenko)
- Move three x86-specific ACPI files to the x86 directory (Andy
Shevchenko)
- Mark SMO8810 accel on Dell XPS 15 9550 as always present and add a
PNP_UART1_SKIP quirk for Lenovo Blade2 tablets (Hans de Goede)
- Move acpi_blacklisted() declaration to asm/acpi.h (Kuppuswamy
Sathyanarayanan)
- Add Lunar Lake support to the ACPI DPTF driver (Sumeet Pawnikar)
- Mark the einj_driver driver's remove callback as __exit because it
cannot get unbound via sysfs (Uwe Kleine-König)
- Fix a typo in the ACPI documentation regarding the layout of sysfs
subdirectory representing the ACPI namespace (John Watts)
- Make the ACPI pfrut utility print the update_cap field during
capability query (Chen Yu)
- Add HAS_IOPORT dependencies to PNP (Niklas Schnelle)"
* tag 'acpi-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
ACPI/NUMA: Squash acpi_numa_memory_affinity_init() into acpi_parse_memory_affinity()
ACPI/NUMA: Squash acpi_numa_slit_init() into acpi_parse_slit()
ACPI/NUMA: Remove architecture dependent remainings
x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks()
ACPI: video: Add backlight=native quirk for Lenovo Slim 7 16ARH7
ACPI: scan: Avoid enumerating devices with clearly invalid _STA values
ACPI: Move acpi_blacklisted() declaration to asm/acpi.h
ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MV
ACPICA: AEST: Add support for the AEST V2 table
ACPI: tools: pfrut: Print the update_cap field during capability query
ACPI: property: Add reference to UEFI DSD Guide
Documentation: firmware-guide: ACPI: Fix namespace typo
PNP: add HAS_IOPORT dependencies
ACPI: resource: Do IRQ override on TongFang GXxHRXx and GMxHGxx
ACPI: resource: Do IRQ override on GMxBGxx (XMG APEX 17 M23)
ACPICA: Update acpixf.h for new ACPICA release 20240322
ACPICA: events/evgpeinit: don't forget to increment registered GPE count
ACPICA: Fix CXL 3.0 structure (RDPAS) in the CEDT table
ACPICA: SRAT: Add dump and compiler support for RINTC affinity structure
ACPICA: SRAT: Add RISC-V RINTC affinity structure
...
The number of updated CPU capabilities per netlink event is hard-coded to
16. On systems with more than 16 CPUs (a common case), it takes more than
one thermal netlink event to relay all the new capabilities after an HFI
interrupt. This adds unnecessary overhead to both the kernel and user space
entities.
Increase the number of CPU capabilities updated per event to 64. Any system
with 64 CPUs or less can now update all the capabilities in a single
thermal netlink event.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When processing a hardware update, HFI generates as many thermal netlink
events as needed to relay all the updated CPU capabilities to user space.
The constant HFI_MAX_THERM_NOTIFY_COUNT is the number of CPU capabilities
updated per each of those events.
Give this constant a more descriptive name.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The delay between an HFI interrupt and its corresponding thermal netlink
event has so far been hard-coded to CONFIG_HZ jiffies (1 second). This
delay is too long for hardware that generates updates every tens of
milliseconds.
The HFI driver uses a delayed workqueue to send thermal netlink events. No
subsequent events will be sent if there is pending work.
As a result, much of the information of consecutive hardware updates will
be lost if the workqueue delay is too long. User space entities may act on
obsolete data. If the delay is too short, multiple events may overwhelm
listeners.
Set the delay to 100ms to strike a balance between too many and too few
events. Use milliseconds instead of jiffies to improve readability.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The name of the constant HFI_UPDATE_INTERVAL is misleading. It is not a
periodic interval at which HFI updates are processed. It is the delay in
the processing of an HFI update after the arrival of an HFI interrupt.
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Deduplicate ->read() callbacks of bin_attributes which are backed by a
simple buffer in memory:
Use the newly introduced sysfs_bin_attr_simple_read() helper instead,
either by referencing it directly or by declaring such bin_attributes
with BIN_ATTR_SIMPLE_RO() or BIN_ATTR_SIMPLE_ADMIN_RO().
Aside from a reduction of LoC, this shaves off a few bytes from vmlinux
(304 bytes on an x86_64 allyesconfig).
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Zhi Wang <zhiwang@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/92ee0a0e83a5a3f3474845db6c8575297698933a.1712410202.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add Lunar Lake ACPI IDs for DPTF devices.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
psvt->limit.string can only be 8 bytes so let's use the appropriate size
macro ACPI_LIMIT_STR_MAX_LEN.
Neither psvt->limit.string or psvt_user[i].limit.string requires the
NUL-padding behavior that strncpy() provides as they have both been
filled with NUL-bytes prior to the string operation.
| memset(&psvt->limit, 0, sizeof(u64));
and
| psvt_user = kzalloc(psvt_len, GFP_KERNEL);
Let's use `strscpy` [2] due to the fact that it guarantees
NUL-termination on the destination buffer without unnecessarily
NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings # [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Enable and disable hardware feedback interface (HFI) when user space
handler is present. For example, enable HFI, when intel-speed-select or
Intel Low Power daemon is running and subscribing to thermal netlink
events. When user space handlers exit or remove subscription for
thermal netlink events, disable HFI.
Summary of changes:
- Register a thermal genetlink notifier
- In the notifier, process THERMAL_NOTIFY_BIND and THERMAL_NOTIFY_UNBIND
reason codes to count number of thermal event group netlink multicast
clients. If thermal netlink group has any listener enable HFI on all
packages. If there are no listener disable HFI on all packages.
- When CPU is online, instead of blindly enabling HFI, check if
the thermal netlink group has any listener. This will make sure that
HFI is not enabled by default during boot time.
- Actual processing to enable/disable matches what is done in
suspend/resume callbacks. Create two functions hfi_enable_instance()
and hfi_disable_instance(), which can be called from the netlink
notifier callback and suspend/resume callbacks.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Store zone trips table and zone operations directly in struct
thermal_zone_device (Rafael Wysocki).
- Fix up flex array initialization during thermal zone device
registration (Nathan Chancellor).
- Rework writable trip points handling in the thermal core and
several drivers (Rafael Wysocki).
- Thermal core code cleanups (Dan Carpenter, Flavio Suligoi).
- Use thermal zone accessor functions in the int340x Intel thermal
driver (Rafael Wysocki).
- Add Lunar Lake-M PCI ID to the int340x Intel thermal driver (Srinivas
Pandruvada).
- Minor fixes for thermal governors (Rafael Wysocki, Di Shen).
- Trip point handling fixes for the iwlwifi wireless driver (Rafael
Wysocki).
- Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno).
-----BEGIN PGP SIGNATURE-----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=Is/Y
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These mostly change the thermal core in a few ways allowing thermal
drivers to be simplified, in particular in their removal and failing
probe handling parts that are notoriously prone to errors, and
propagate the changes to several drivers.
Apart from that, support for a new platform is added (Intel Lunar
Lake-M), some bugs are fixed and some code is cleaned up, as usual.
Specifics:
- Store zone trips table and zone operations directly in struct
thermal_zone_device (Rafael Wysocki)
- Fix up flex array initialization during thermal zone device
registration (Nathan Chancellor)
- Rework writable trip points handling in the thermal core and
several drivers (Rafael Wysocki)
- Thermal core code cleanups (Dan Carpenter, Flavio Suligoi)
- Use thermal zone accessor functions in the int340x Intel thermal
driver (Rafael Wysocki)
- Add Lunar Lake-M PCI ID to the int340x Intel thermal driver
(Srinivas Pandruvada)
- Minor fixes for thermal governors (Rafael Wysocki, Di Shen)
- Trip point handling fixes for the iwlwifi wireless driver (Rafael
Wysocki)
- Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno)"
* tag 'thermal-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
thermal: core: remove unnecessary check in trip_point_hyst_store()
thermal: intel: int340x_thermal: Use thermal zone accessor functions
thermal: core: Remove excess empty line from a comment
thermal: int340x: processor_thermal: Add Lunar Lake-M PCI ID
thermal: core: Eliminate writable trip points masks
thermal: of: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: imx: Set THERMAL_TRIP_FLAG_RW_TEMP directly
wifi: iwlwifi: mvm: Set THERMAL_TRIP_FLAG_RW_TEMP directly
mlxsw: core_thermal: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: intel: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: core: Drop the .set_trip_hyst() thermal zone operation
thermal: core: Add flags to struct thermal_trip
thermal: core: Move initial num_trips assignment before memcpy()
thermal: Get rid of CONFIG_THERMAL_WRITABLE_TRIPS
thermal: intel: Adjust ops handling during thermal zone registration
thermal: ACPI: Constify acpi_thermal_zone_ops
thermal: core: Store zone ops in struct thermal_zone_device
thermal: intel: Discard trip tables after zone registration
thermal: ACPI: Discard trips table after zone registration
thermal: core: Store zone trips table in struct thermal_zone_device
...
- Allow the Energy Model to be updated dynamically (Lukasz Luba).
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V).
- Fix and clean up system suspend statistics collection (Rafael
Wysocki).
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki).
- Fix PCI hibernation support description (Yiwei Lin).
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy).
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah).
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li).
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus).
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat).
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin).
- Enable preferred core support in the amd-pstate cpufreq driver (Meng
Li).
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li).
- Allow intel_pstate to assign model-specific values to strings used in
the EPP sysfs interface and make it do so on Meteor Lake (Srinivas
Pandruvada).
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby).
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar).
- Change default transition delay in cpufreq to 2ms (Qais Yousef).
- Remove references to 10ms minimum sampling rate from comments in the
cpufreq code (Pierre Gondois).
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef).
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar).
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova).
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan).
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois).
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle).
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng).
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang).
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui).
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano).
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li).
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda).
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil).
- Fix a couple of warnings in the OPP core code related to W=1
builds (Viresh Kumar).
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar).
- Extend dev_pm_opp_data with turbo support (Sibi Sankar).
- dt-bindings: drop maxItems from inner items (David Heidelberg).
-----BEGIN PGP SIGNATURE-----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=UePT
-----END PGP SIGNATURE-----
Merge tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"From the functional perspective, the most significant change here is
the addition of support for Energy Models that can be updated
dynamically at run time.
There is also the addition of LZ4 compression support for hibernation,
the new preferred core support in amd-pstate, new platforms support in
the Intel RAPL driver, new model-specific EPP handling in intel_pstate
and more.
Apart from that, the cpufreq default transition delay is reduced from
10 ms to 2 ms (along with some related adjustments), the system
suspend statistics code undergoes a significant rework and there is a
usual bunch of fixes and code cleanups all over.
Specifics:
- Allow the Energy Model to be updated dynamically (Lukasz Luba)
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V)
- Fix and clean up system suspend statistics collection (Rafael
Wysocki)
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki)
- Fix PCI hibernation support description (Yiwei Lin)
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy)
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah)
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li)
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus)
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat)
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin)
- Enable preferred core support in the amd-pstate cpufreq driver
(Meng Li)
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li)
- Allow intel_pstate to assign model-specific values to strings used
in the EPP sysfs interface and make it do so on Meteor Lake
(Srinivas Pandruvada)
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby)
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar)
- Change default transition delay in cpufreq to 2ms (Qais Yousef)
- Remove references to 10ms minimum sampling rate from comments in
the cpufreq code (Pierre Gondois)
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef)
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova)
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois)
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle)
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng)
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang)
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano)
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda)
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)
- Fix a couple of warnings in the OPP core code related to W=1 builds
(Viresh Kumar)
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar)
- Extend dev_pm_opp_data with turbo support (Sibi Sankar)
- dt-bindings: drop maxItems from inner items (David Heidelberg)"
* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
dt-bindings: opp: drop maxItems from inner items
OPP: debugfs: Fix warning around icc_get_name()
OPP: debugfs: Fix warning with W=1 builds
cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
OPP: Extend dev_pm_opp_data with turbo support
Fix cpupower-frequency-info.1 man page typo
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
PM: sleep: wakeirq: fix wake irq warning in system suspend
powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
cpufreq: Don't unregister cpufreq cooling on CPU hotplug
PM: suspend: Set mem_sleep_current during kernel command line setup
cpufreq: Honour transition_latency over transition_delay_us
cpufreq: Limit resolving a frequency to policy min/max
Documentation: PM: Fix runtime_pm.rst markdown syntax
cpufreq: amd-pstate: adjust min/max limit perf
cpufreq: Remove references to 10ms min sampling rate
cpufreq: intel_pstate: Update default EPPs for Meteor Lake
...
Make int340x_thermal use the dedicated accessor functions for the
thermal zone device object address and the thermal zone type string.
This is requisite for future thermal core improvements.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Add Lunar Lake-M PCI ID for processor thermal device.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
All of the thermal_zone_device_register_with_trips() callers pass zero
writable trip points masks to it, so drop the mask argument from that
function and update all of its callers accordingly.
This also removes the artificial trip points per zone limit of 32,
related to using writable trip points masks.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Some Intel thermal drivers need/want the temperature of their trip
points to be set by user space via sysfs and so they pass nonzero
writable trip masks during thermal zone registration for this purpose.
It is now possible to achieve the same result by setting the
THERMAL_TRIP_FLAG_RW_TEMP trip flag directly, so modify the drivers
in question to do that instead of using a nonzero writable trips mask.
No intentional functional impact.
Note that this change is requisite for dropping the mask argument from
thermal_zone_device_register_with_trips() going forward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The only difference made by CONFIG_THERMAL_WRITABLE_TRIPS is whether or
not the writable trips mask passed during thermal zone registration
will take any effect, but whoever passes a non-zero writable trips mask
to thermal_zone_device_register_with_trips() can be forgiven thinking
that it will always work.
Moreover, some thermal drivers expect user space to set trip temperature
values, so they select CONFIG_THERMAL_WRITABLE_TRIPS, possibly overriding
a manual choice to unset it and going against the design purportedly
allowing system integrators to decide on the writability of trip points
for the given kernel build. It is also set in one platform's defconfig.
Forthermore, CONFIG_THERMAL_WRITABLE_TRIPS only affects trip temperature,
because trip hysteresis is writable as long as the thermal zone provides
a callback to update it, regardless of the CONFIG_THERMAL_WRITABLE_TRIPS
value.
The above means that the symbol in question is used inconsistently and
its purpose is at least moot, so remove it and always take the writable
trip mask passed to thermal_zone_device_register_with_trips() into
account.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Because thermal zone operations are now stored directly in struct
thermal_zone_device, thermal zone creators can discard the operations
structure after the zone registration is complete, or it can be made
read-only.
Accordingly, make int340x_thermal_zone_add() use a local variable to
represent thermal zone operations, so it is freed automatically upon the
function exit, and make the other Intel thermal drivers use const zone
operations structures.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Because the thermal core creates and uses its own copy of the trips
table passed to thermal_zone_device_register_with_trips(), it is not
necessary to hold on to a local copy of it any more after the given
thermal zone has been registered.
Accordingly, modify Intel thermal drivers to discard the trips tables
passed to thermal_zone_device_register_with_trips() after thermal zone
registration, for example by storing them in local variables which are
automatically discarded when the zone registration is complete.
Also make some additional code simplifications unlocked by the above
changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The RAPL framework uses CPU hotplug locking to protect the rapl_packages
list and rp->lead_cpu to guarantee that
1. the RAPL package device is not unprobed and freed
2. the cached rp->lead_cpu is always valid
for operations like powercap sysfs accesses.
Current RAPL APIs assume being called from CPU hotplug callbacks which
hold the CPU hotplug lock, but TPMI RAPL driver invokes the APIs in the
driver's .probe() function without acquiring the CPU hotplug lock.
Fix the problem by providing both locked and lockless versions of RAPL
APIs.
Fixes: 9eef7f9da9 ("powercap: intel_rapl: Introduce RAPL TPMI interface driver")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CPU temperature can be negative in some cases. Thus the negative CPU
temperature should not be considered as a failure.
Fix intel_tcc_get_temp() and its users to support negative CPU
temperature.
Fixes: a3c1f066e1 ("thermal/intel: Introduce Intel TCC library")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Cc: 6.3+ <stable@vger.kernel.org> # 6.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After conversion of this driver to use powercap idle_inject core, this
driver doesn't use target_mwait value. So remove dead code.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Add debugfs-based diagnostics support to the thermal core (Daniel
Lezcano, Dan Carpenter).
- Fix a power allocator thermal governor issue preventing it from
resetting cooling devices sometimes (Di Shen).
- Simplify the thermal netlink API and clean up related code (Rafael J.
Wysocki).
- Make the Intel HFI driver support hibernation and deep suspend
properly (Ricardo Neri).
-----BEGIN PGP SIGNATURE-----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=TPzj
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These add support for debugfs-based diagnostics to the thermal core,
simplify the thermal netlink API, fix system-wide PM support in the
Intel HFI driver and clean up some code.
Specifics:
- Add debugfs-based diagnostics support to the thermal core (Daniel
Lezcano, Dan Carpenter)
- Fix a power allocator thermal governor issue preventing it from
resetting cooling devices sometimes (Di Shen)
- Simplify the thermal netlink API and clean up related code (Rafael
J. Wysocki)
- Make the Intel HFI driver support hibernation and deep suspend
properly (Ricardo Neri)"
* tag 'thermal-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/debugfs: Unlock on error path in thermal_debug_tz_trip_up()
thermal: intel: hfi: Add syscore callbacks for system-wide PM
thermal: gov_power_allocator: avoid inability to reset a cdev
thermal: helpers: Rearrange thermal_cdev_set_cur_state()
thermal: netlink: Rework notify API for cooling devices
thermal: core: Use kstrdup_const() during cooling device registration
thermal/debugfs: Add thermal debugfs information for mitigation episodes
thermal/debugfs: Add thermal cooling device debugfs information
thermal: netlink: Pass thermal zone pointer to notify routines
thermal: netlink: Drop thermal_notify_tz_trip_add/delete()
thermal: netlink: Pass pointers to thermal_notify_tz_trip_up/down()
thermal: netlink: Pass pointers to thermal_notify_tz_trip_change()
The kernel allocates a memory buffer and provides its location to the
hardware, which uses it to update the HFI table. This allocation occurs
during boot and remains constant throughout runtime.
When resuming from hibernation, the restore kernel allocates a second
memory buffer and reprograms the HFI hardware with the new location as
part of a normal boot. The location of the second memory buffer may
differ from the one allocated by the image kernel.
When the restore kernel transfers control to the image kernel, its HFI
buffer becomes invalid, potentially leading to memory corruption if the
hardware writes to it (the hardware continues to use the buffer from the
restore kernel).
It is also possible that the hardware "forgets" the address of the memory
buffer when resuming from "deep" suspend. Memory corruption may also occur
in such a scenario.
To prevent the described memory corruption, disable HFI when preparing to
suspend or hibernate. Enable it when resuming.
Add syscore callbacks to handle the package of the boot CPU (packages of
non-boot CPUs are handled via CPU offline). Syscore ops always run on the
boot CPU. Additionally, HFI only needs to be disabled during "deep" suspend
and hibernation. Syscore ops only run in these cases.
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
[ rjw: Comment adjustment, subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Add dynamic thresholds for trip point crossing detection to prevent
trip point crossing notifications from being sent at incorrect times
or not at all in some cases (Rafael J. Wysocki).
- Fix synchronization issues related to the resume of thermal zones
during a system-wide resume and allow thermal zones to be resumed
concurrently (Rafael J. Wysocki).
- Modify the thermal zone unregistration to wait for the given zone to
go away completely before returning to the caller and rework the
sysfs interface for trip points on top of that (Rafael J. Wysocki).
- Fix a possible NULL pointer dereference in thermal zone registration
error path (Rafael J. Wysocki).
- Clean up the IPA thermal governor and modify it (with the help of a
new governor callback) to avoid allocating and freeing memory every
time its throttling callback is invoked (Lukasz Luba).
- Make the IPA thermal governor handle thermal instance weight changes
via sysfs correctly (Lukasz Luba).
- Update the thermal netlink code to avoid sending messages if there
are no recipients (Stanislaw Gruszka).
- Convert Mediatek Thermal to the json-schema (Rafał Miłecki).
- Fix thermal DT bindings issue on Loongson (Binbin Zhou).
- Fix returning NULL instead of -ENODEV during thermal probe on
Loogsoon (Binbin Zhou).
- Add thermal DT binding for tsens on the SM8650 platform (Neil
Armstrong).
- Add reboot on the critical trip point crossing option feature (Fabio
Estevam).
- Use DEFINE_SIMPLE_DEV_PM_OPS do define PM functions for thermal
suspend/resume on AmLogic (Uwe Kleine-König)
- Add D1/T113s THS controller support to the Sun8i thermal control
driver (Maxim Kiselev)
- Fix example in the thermal DT binding for QCom SPMI (Johan Hovold).
- Fix compilation warning in the tmon utility (Florian Eckert).
- Add support for interrupt-based thermal configuration on Exynos along
with a set of related cleanups (Mateusz Majewski).
- Make the Intel HFI thermal driver enable an HFI instance (eg. processor
package) from its first online CPU and disable it when the last CPU in
it goes offline (Ricardo Neri).
- Fix a kernel-doc warning and a spello in the cpuidle_cooling thermal
driver (Randy Dunlap).
- Move the .get_temp() thermal zone callback presence check to the
thermal zone registration code (Daniel Lezcano).
- Use the for_each_trip() macro for trip points table walks in a few
places in the thermal core (Rafael J. Wysocki).
- Make all trip point updates (via sysfs as well as from the platform
firmware) trigger trip change notifications (Rafael J. Wysocki).
- Drop redundant code from the thermal core and make one function in
it take a const pointer argument (Rafael J. Wysocki).
-----BEGIN PGP SIGNATURE-----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=QVyh
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add support for the D1/T113s THS controller to the sun8i driver
and a DT-based mechanism for platforms to indicate a preference to
reboot (instead of shutting down) on crossing a critical trip point,
fix issues, make other improvements (in the IPA governor, the Intel
HFI driver, the exynos driver and the thermal netlink interface among
other places) and clean up code.
One long-standing issue addressed here is that trip point crossing
notifications sent to user space might be unreliable due to the
incorrect handling of trip point hysteresis in the thermal core:
multiple notifications might be sent for the same event or there might
be events without any notification at all.
Specifics:
- Add dynamic thresholds for trip point crossing detection to prevent
trip point crossing notifications from being sent at incorrect
times or not at all in some cases (Rafael J. Wysocki)
- Fix synchronization issues related to the resume of thermal zones
during a system-wide resume and allow thermal zones to be resumed
concurrently (Rafael J. Wysocki)
- Modify the thermal zone unregistration to wait for the given zone
to go away completely before returning to the caller and rework the
sysfs interface for trip points on top of that (Rafael J. Wysocki)
- Fix a possible NULL pointer dereference in thermal zone
registration error path (Rafael J. Wysocki)
- Clean up the IPA thermal governor and modify it (with the help of a
new governor callback) to avoid allocating and freeing memory every
time its throttling callback is invoked (Lukasz Luba)
- Make the IPA thermal governor handle thermal instance weight
changes via sysfs correctly (Lukasz Luba)
- Update the thermal netlink code to avoid sending messages if there
are no recipients (Stanislaw Gruszka)
- Convert Mediatek Thermal to the json-schema (Rafał Miłecki)
- Fix thermal DT bindings issue on Loongson (Binbin Zhou)
- Fix returning NULL instead of -ENODEV during thermal probe on
Loogsoon (Binbin Zhou)
- Add thermal DT binding for tsens on the SM8650 platform (Neil
Armstrong)
- Add reboot on the critical trip point crossing option feature
(Fabio Estevam)
- Use DEFINE_SIMPLE_DEV_PM_OPS do define PM functions for thermal
suspend/resume on AmLogic (Uwe Kleine-König)
- Add D1/T113s THS controller support to the Sun8i thermal control
driver (Maxim Kiselev)
- Fix example in the thermal DT binding for QCom SPMI (Johan Hovold)
- Fix compilation warning in the tmon utility (Florian Eckert)
- Add support for interrupt-based thermal configuration on Exynos
along with a set of related cleanups (Mateusz Majewski)
- Make the Intel HFI thermal driver enable an HFI instance (eg.
processor package) from its first online CPU and disable it when
the last CPU in it goes offline (Ricardo Neri)
- Fix a kernel-doc warning and a spello in the cpuidle_cooling
thermal driver (Randy Dunlap)
- Move the .get_temp() thermal zone callback presence check to the
thermal zone registration code (Daniel Lezcano)
- Use the for_each_trip() macro for trip points table walks in a few
places in the thermal core (Rafael J. Wysocki)
- Make all trip point updates (via sysfs as well as from the platform
firmware) trigger trip change notifications (Rafael J. Wysocki)
- Drop redundant code from the thermal core and make one function in
it take a const pointer argument (Rafael J. Wysocki)"
* tag 'thermal-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
thermal: trip: Constify thermal zone argument of thermal_zone_trip_id()
thermal: intel: hfi: Disable an HFI instance when all its CPUs go offline
thermal: intel: hfi: Enable an HFI instance from its first online CPU
thermal: intel: hfi: Refactor enabling code into helper functions
thermal/drivers/exynos: Use set_trips ops
thermal/drivers/exynos: Use BIT wherever possible
thermal/drivers/exynos: Split initialization of TMU and the thermal zone
thermal/drivers/exynos: Stop using the threshold mechanism on Exynos 4210
thermal/drivers/exynos: Simplify regulator (de)initialization
thermal/drivers/exynos: Handle devm_regulator_get_optional return value correctly
thermal/drivers/exynos: Wwitch from workqueue-driven interrupt handling to threaded interrupts
thermal/drivers/exynos: Drop id field
thermal/drivers/exynos: Remove an unnecessary field description
tools/thermal/tmon: Fix compilation warning for wrong format
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names
thermal/drivers/sun8i: Add D1/T113s THS controller support
dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
thermal: amlogic: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
thermal: amlogic: Make amlogic_thermal_disable() return void
...
