Staging tree pull request for 3.5-rc1

Here is the big staging tree pull request for the 3.5-rc1 merge window. Loads of changes here, and we just narrowly added more lines than we added: 622 files changed, 28356 insertions(+), 26059 deletions(-) But, good news is that there is a number of subsystems that moved out of the staging tree, to their respective "real" portions of the kernel. Code that moved out was: - iio core code - mei driver - vme core and bridge drivers There was one broken network driver that moved into staging as a step before it is removed from the tree (pc300), and there was a few new drivers added to the tree: - new iio drivers - gdm72xx wimax USB driver - ipack subsystem and 2 drivers All of the movements around have acks from the various subsystem maintainers, and all of this has been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) iEYEABECAAYFAk+7q8MACgkQMUfUDdst+ymjogCguo8fANFVlPWeZGeoBTL+aQfQ yTkAoLE0codmh+2SvhulYgyU1Wh6ZDK2 =nJ2F -----END PGP SIGNATURE----- Merge tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree changes from Greg Kroah-Hartman: "Here is the big staging tree pull request for the 3.5-rc1 merge window. Loads of changes here, and we just narrowly added more lines than we added: 622 files changed, 28356 insertions(+), 26059 deletions(-) But, good news is that there is a number of subsystems that moved out of the staging tree, to their respective "real" portions of the kernel. Code that moved out was: - iio core code - mei driver - vme core and bridge drivers There was one broken network driver that moved into staging as a step before it is removed from the tree (pc300), and there was a few new drivers added to the tree: - new iio drivers - gdm72xx wimax USB driver - ipack subsystem and 2 drivers All of the movements around have acks from the various subsystem maintainers, and all of this has been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed up various trivial conflicts, along with a non-trivial one found in -next and pointed out by Olof Johanssen: a clean - but incorrect - merge of the arch/arm/boot/dts/at91sam9g20.dtsi file. Fix up manually as per Stephen Rothwell. * tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (536 commits) Staging: bcm: Remove two unused variables from Adapter.h Staging: bcm: Removes the volatile type definition from Adapter.h Staging: bcm: Rename all "INT" to "int" in Adapter.h Staging: bcm: Fix warning: __packed vs. __attribute__((packed)) in Adapter.h Staging: bcm: Correctly format all comments in Adapter.h Staging: bcm: Fix all whitespace issues in Adapter.h Staging: bcm: Properly format braces in Adapter.h Staging: ipack/bridges/tpci200: remove unneeded casts Staging: ipack/bridges/tpci200: remove TPCI200_SHORTNAME constant Staging: ipack: remove board_name and bus_name fields from struct ipack_device Staging: ipack: improve the register of a bus and a device in the bus. staging: comedi: cleanup all the comedi_driver 'detach' functions staging: comedi: remove all 'default N' in Kconfig staging: line6/config.h: Delete unused header staging: gdm72xx depends on NET staging: gdm72xx: Set up parent link in sysfs for gdm72xx devices staging: drm/omap: initial dmabuf/prime import support staging: drm/omap: dmabuf/prime mmap support pstore/ram: Add ECC support pstore/ram: Switch to persistent_ram routines ...
2012-05-22 16:34:21 -07:00 · 2012-05-22 16:34:21 -07:00 · fb09bafda6
commit fb09bafda6
parent 94b5aff4c6 c3c6cc91b0
611 changed files with 27851 additions and 25644 deletions
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio
+++ b/drivers/staging/iio/Documentation/sysfs-bus-iio
@ -108,7 +108,7 @@ Description:
 		physically equivalent inputs when non differential readings are
 		separately available. In differential only parts, then all that
 		is required is a consistent labeling.  Units after application
-		of scale and offset are nanofarads..
+		of scale and offset are nanofarads.

 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_raw
@ -119,7 +119,7 @@ KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Raw (unscaled no bias removal etc) temperature measurement.
-		It an axis is specified it generally means that the temperature
+		If an axis is specified it generally means that the temperature
 		sensor is associated with one part of a compound device (e.g.
 		a gyroscope axis). Units after application of scale and offset
 		are milli degrees Celsuis.
@ -232,7 +232,7 @@ Description:
 		If known for a device, scale to be applied to <type>Y[_name]_raw
 		post addition of <type>[Y][_name]_offset in order to obtain the
 		measured value in <type> units as specified in
-		<type>[Y][_name]_raw documentation..  If shared across all in
+		<type>[Y][_name]_raw documentation.  If shared across all in
 		channels then Y and <x|y|z> are not present and the value is
 		called <type>[Y][_name]_scale. The peak modifier means this
 		value is applied to <type>Y[_name]_peak_raw values.
@ -243,6 +243,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@ -258,6 +260,8 @@ What		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
 What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale
 What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
 What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
+what		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale
+what		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@ -276,6 +280,13 @@ Description:
 		If a discrete set of scale values are available, they
 		are listed in this attribute.

+What		/sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware applied gain factor. If shared across all channels,
+		<type>_hardwaregain is used.
+
 What:		/sys/.../in_accel_filter_low_pass_3db_frequency
 What:		/sys/.../in_magn_filter_low_pass_3db_frequency
 What:		/sys/.../in_anglvel_filter_low_pass_3db_frequency
@ -453,10 +464,14 @@ What:		/sys/.../events/in_magn_z_raw_thresh_rising_value
 What:		/sys/.../events/in_magn_z_raw_thresh_falling_value
 What:		/sys/.../events/in_voltageY_supply_raw_thresh_rising_value
 What:		/sys/.../events/in_voltageY_supply_raw_thresh_falling_value
+What:		/sys/.../events/in_voltageY_raw_thresh_rising_value
 What:		/sys/.../events/in_voltageY_raw_thresh_falling_value
-What:		/sys/.../events/in_voltageY_raw_thresh_falling_value
-What:		/sys/.../events/in_tempY_raw_thresh_falling_value
+What:		/sys/.../events/in_tempY_raw_thresh_rising_value
 What:		/sys/.../events/in_tempY_raw_thresh_falling_value
+What:		/sys/.../events/in_illuminance0_thresh_falling_value
+what:		/sys/.../events/in_illuminance0_thresh_rising_value
+what:		/sys/.../events/in_proximity0_thresh_falling_value
+what:		/sys/.../events/in_proximity0_thresh_rising_value
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@ -490,9 +505,9 @@ What:		/sys/.../events/in_magn_z_raw_roc_rising_value
 What:		/sys/.../events/in_magn_z_raw_roc_falling_value
 What:		/sys/.../events/in_voltageY_supply_raw_roc_rising_value
 What:		/sys/.../events/in_voltageY_supply_raw_roc_falling_value
+What:		/sys/.../events/in_voltageY_raw_roc_rising_value
 What:		/sys/.../events/in_voltageY_raw_roc_falling_value
-What:		/sys/.../events/in_voltageY_raw_roc_falling_value
-What:		/sys/.../events/in_tempY_raw_roc_falling_value
+What:		/sys/.../events/in_tempY_raw_roc_rising_value
 What:		/sys/.../events/in_tempY_raw_roc_falling_value
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
@ -556,6 +571,8 @@ What:		/sys/.../events/in_tempY_thresh_falling_period
 What:		/sys/.../events/in_tempY_roc_rising_period
 What:		/sys/.../events/in_tempY_roc_falling_period
 What:		/sys/.../events/in_accel_x&y&z_mag_falling_period
+What:		/sys/.../events/in_intensity0_thresh_period
+What:		/sys/.../events/in_proximity0_thresh_period
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@ -718,24 +735,3 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		This attribute is used to read the amount of quadrature error
 		present in the device at a given time.
-
-What:		/sys/.../iio:deviceX/ac_excitation_en
-KernelVersion:	3.1.0
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This attribute, if available, is used to enable the AC
-		excitation mode found on some converters. In ac excitation mode,
-		the polarity of the excitation voltage is reversed on
-		alternate cycles, to eliminate DC errors.
-
-What:		/sys/.../iio:deviceX/bridge_switch_en
-KernelVersion:	3.1.0
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This attribute, if available, is used to close or open the
-		bridge power down switch found on some converters.
-		In bridge applications, such as strain gauges and load cells,
-		the bridge itself consumes the majority of the current in the
-		system. To minimize the current consumption of the system,
-		the bridge can be disconnected (when it is not being used
-		using the bridge_switch_en attribute.
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@ -1,3 +1,3 @@
 obj-m := DocBook/ accounting/ auxdisplay/ connector/ \
 	filesystems/ filesystems/configfs/ ia64/ laptops/ networking/ \
-	pcmcia/ spi/ timers/ watchdog/src/
+	pcmcia/ spi/ timers/ watchdog/src/ misc-devices/mei/
--- a/Documentation/devicetree/bindings/arm/atmel-adc.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt
@ -0,0 +1,65 @@
+* AT91's Analog to Digital Converter (ADC)
+
+Required properties:
+  - compatible: Should be "atmel,at91sam9260-adc"
+  - reg: Should contain ADC registers location and length
+  - interrupts: Should contain the IRQ line for the ADC
+  - atmel,adc-channel-base: Offset of the first channel data register
+  - atmel,adc-channels-used: Bitmask of the channels muxed and enable for this
+    device
+  - atmel,adc-drdy-mask: Mask of the DRDY interruption in the ADC
+  - atmel,adc-num-channels: Number of channels available in the ADC
+  - atmel,adc-startup-time: Startup Time of the ADC in microseconds as
+    defined in the datasheet
+  - atmel,adc-status-register: Offset of the Interrupt Status Register
+  - atmel,adc-trigger-register: Offset of the Trigger Register
+  - atmel,adc-vref: Reference voltage in millivolts for the conversions
+
+Optional properties:
+  - atmel,adc-use-external: Boolean to enable of external triggers
+ 
+Optional trigger Nodes:
+  - Required properties:
+    * trigger-name: Name of the trigger exposed to the user
+    * trigger-value: Value to put in the Trigger register
+      to activate this trigger
+  - Optional properties:
+    * trigger-external: Is the trigger an external trigger?
+
+Examples:
+adc0: adc@fffb0000 {
+	compatible = "atmel,at91sam9260-adc";
+	reg = <0xfffb0000 0x100>;
+	interrupts = <20 4>;
+	atmel,adc-channel-base = <0x30>;
+	atmel,adc-channels-used = <0xff>;
+	atmel,adc-drdy-mask = <0x10000>;
+	atmel,adc-num-channels = <8>;
+	atmel,adc-startup-time = <40>;
+	atmel,adc-status-register = <0x1c>;
+	atmel,adc-trigger-register = <0x08>;
+	atmel,adc-use-external;
+	atmel,adc-vref = <3300>;
+
+	trigger@0 {
+		trigger-name = "external-rising";
+		trigger-value = <0x1>;
+		trigger-external;
+	};
+	trigger@1 {
+		trigger-name = "external-falling";
+		trigger-value = <0x2>;
+		trigger-external;
+	};
+
+	trigger@2 {
+		trigger-name = "external-any";
+		trigger-value = <0x3>;
+		trigger-external;
+	};
+
+	trigger@3 {
+		trigger-name = "continuous";
+		trigger-value = <0x6>;
+	};
+};
--- a/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt
+++ b/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt
@ -0,0 +1,16 @@
+* NXP LPC32xx SoC ADC controller
+
+Required properties:
+- compatible: must be "nxp,lpc3220-adc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: The ADC interrupt
+
+Example:
+
+	adc@40048000 {
+		compatible = "nxp,lpc3220-adc";
+		reg = <0x40048000 0x1000>;
+		interrupt-parent = <&mic>;
+		interrupts = <39 0>;
+	};
--- a/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
+++ b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
@ -0,0 +1,26 @@
+* ST SPEAr ADC device driver
+
+Required properties:
+- compatible: Should be "st,spear600-adc"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the ADC interrupt
+- sampling-frequency: Default sampling frequency
+
+Optional properties:
+- vref-external: External voltage reference in milli-volts. If omitted
+  the internal voltage reference will be used.
+- average-samples: Number of samples to generate an average value. If
+  omitted, single data conversion will be used.
+
+Examples:
+
+	adc: adc@d8200000 {
+		compatible = "st,spear600-adc";
+		reg = <0xd8200000 0x1000>;
+		interrupt-parent = <&vic1>;
+		interrupts = <6>;
+		sampling-frequency = <5000000>;
+		vref-external = <2500>;	/* 2.5V VRef */
+	};
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@ -120,6 +120,7 @@ Code  Seq#(hex)	Include File		Comments
 'G'	00-0F	linux/gigaset_dev.h	conflict!
 'H'	00-7F	linux/hiddev.h		conflict!
 'H'	00-0F	linux/hidraw.h		conflict!
+'H'	01	linux/mei.h		conflict!
 'H'	00-0F	sound/asound.h		conflict!
 'H'	20-40	sound/asound_fm.h	conflict!
 'H'	80-8F	sound/sfnt_info.h	conflict!
--- a/Documentation/misc-devices/mei/.gitignore
+++ b/Documentation/misc-devices/mei/.gitignore
@ -0,0 +1 @@
+mei-amt-version
--- a/Documentation/misc-devices/mei/Makefile
+++ b/Documentation/misc-devices/mei/Makefile
@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := mei-amt-version
+HOSTCFLAGS_mei-amt-version.o += -I$(objtree)/usr/include
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
--- a/Documentation/misc-devices/mei/TODO
+++ b/Documentation/misc-devices/mei/TODO
@ -0,0 +1,2 @@
+TODO:
+	- Cleanup and split the timer function
--- a/Documentation/misc-devices/mei/mei-amt-version.c
+++ b/Documentation/misc-devices/mei/mei-amt-version.c
@ -74,7 +74,7 @@
 #include <stdint.h>
 #include <stdbool.h>
 #include <bits/wordsize.h>
-#include "mei.h"
+#include <linux/mei.h>

 /*****************************************************************************
 * Intel Management Engine Interface
--- a/Documentation/misc-devices/mei/mei.txt
+++ b/Documentation/misc-devices/mei/mei.txt
--- a/Documentation/ramoops.txt
+++ b/Documentation/ramoops.txt
@ -3,7 +3,7 @@ Ramoops oops/panic logger

 Sergiu Iordache <sergiu@chromium.org>

-Updated: 8 August 2011
+Updated: 17 November 2011

 0. Introduction

@ -30,6 +30,11 @@ variable while setting 0 in that variable dumps only the panics.
 The module uses a counter to record multiple dumps but the counter gets reset
 on restart (i.e. new dumps after the restart will overwrite old ones).

+Ramoops also supports software ECC protection of persistent memory regions.
+This might be useful when a hardware reset was used to bring the machine back
+to life (i.e. a watchdog triggered). In such cases, RAM may be somewhat
+corrupt, but usually it is restorable.
+
 2. Setting the parameters

 Setting the ramoops parameters can be done in 2 different manners:
@ -38,7 +43,7 @@ Setting the ramoops parameters can be done in 2 different manners:
 2. Use a platform device and set the platform data. The parameters can then
 be set through that platform data. An example of doing that is:

-#include <linux/ramoops.h>
+#include <linux/pstore_ram.h>
 [...]

 static struct ramoops_platform_data ramoops_data = {
@ -46,6 +51,7 @@ static struct ramoops_platform_data ramoops_data = {
        .mem_address            = <...>,
        .record_size            = <...>,
        .dump_oops              = <...>,
+        .ecc                    = <...>,
 };

 static struct platform_device ramoops_dev = {
@ -71,6 +77,6 @@ timestamp and a new line. The dump then continues with the actual data.

 4. Reading the data

-The dump data can be read from memory (through /dev/mem or other means).
-Getting the module parameters, which are needed in order to parse the data, can
-be done through /sys/module/ramoops/parameters/* .
+The dump data can be read from the pstore filesystem. The format for these
+files is "dmesg-ramoops-N", where N is the record number in memory. To delete
+a stored record from RAM, simply unlink the respective pstore file.
--- a/drivers/staging/vme/vme_api.txt
+++ b/drivers/staging/vme/vme_api.txt
--- a/21
+++ b/21
@ -3406,6 +3406,7 @@ IIO SUBSYSTEM AND DRIVERS
 M:	Jonathan Cameron <jic23@cam.ac.uk>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
+F:	drivers/iio/
 F:	drivers/staging/iio/

 IKANOS/ADI EAGLE ADSL USB DRIVER
@ -3625,6 +3626,14 @@ S:	Supported
 W:	http://wireless.kernel.org/en/users/Drivers/iwmc3200wifi
 F:	drivers/net/wireless/iwmc3200wifi/

+INTEL MANAGEMENT ENGINE (mei)
+M:	Tomas Winkler <tomas.winkler@intel.com>
+L:	linux-kernel@vger.kernel.org
+S:	Supported
+F:	include/linux/mei.h
+F:	drivers/misc/mei/*
+F:	Documentation/mei/*
+
 IOC3 ETHERNET DRIVER
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-mips@linux-mips.org
@ -7350,6 +7359,18 @@ S:	Maintained
 F:	drivers/vlynq/vlynq.c
 F:	include/linux/vlynq.h

+VME SUBSYSTEM
+M:	Martyn Welch <martyn.welch@ge.com>
+M:	Manohar Vanga <manohar.vanga@cern.ch>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+L:	devel@driverdev.osuosl.org
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git
+F:	Documentation/vme_api.txt
+F:	drivers/staging/vme/
+F:	drivers/vme/
+F:	include/linux/vme*
+
 VMWARE VMXNET3 ETHERNET DRIVER
 M:	Shreyas Bhatewara <sbhatewara@vmware.com>
 M:	"VMware, Inc." <pv-drivers@vmware.com>
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@ -199,6 +199,43 @@
 				interrupts = <25 4>;
 				status = "disabled";
 			};
+
+			adc0: adc@fffb0000 {
+				compatible = "atmel,at91sam9260-adc";
+				reg = <0xfffb0000 0x100>;
+				interrupts = <20 4>;
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0xff>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-num-channels = <8>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-channel-base = <0x30>;
+				atmel,adc-drdy-mask = <0x10000>;
+				atmel,adc-status-register = <0x1c>;
+				atmel,adc-trigger-register = <0x08>;
+
+				trigger@0 {
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+				};
+				trigger@1 {
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+				};
+
+				trigger@2 {
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+				};
+
+				trigger@3 {
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+				};
+			};
 		};

 		nand0: nand@40000000 {
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@ -190,6 +190,44 @@
 				interrupts = <27 4>;
 				status = "disabled";
 			};
+
+			adc0: adc@f804c000 {
+				compatible = "atmel,at91sam9260-adc";
+				reg = <0xf804c000 0x100>;
+				interrupts = <19 4>;
+				atmel,adc-use-external;
+				atmel,adc-channels-used = <0xffff>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-num-channels = <12>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-channel-base = <0x50>;
+				atmel,adc-drdy-mask = <0x1000000>;
+				atmel,adc-status-register = <0x30>;
+				atmel,adc-trigger-register = <0xc0>;
+
+				trigger@0 {
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+				};
+
+				trigger@1 {
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+				};
+
+				trigger@2 {
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+				};
+
+				trigger@3 {
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+				};
+			};
 		};

 		nand0: nand@40000000 {
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@ -55,6 +55,13 @@ static struct clk adc_clk = {
 	.pmc_mask	= 1 << AT91SAM9260_ID_ADC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+
+static struct clk adc_op_clk = {
+	.name		= "adc_op_clk",
+	.type		= CLK_TYPE_PERIPHERAL,
+	.rate_hz	= 5000000,
+};
+
 static struct clk usart0_clk = {
 	.name		= "usart0_clk",
 	.pmc_mask	= 1 << AT91SAM9260_ID_US0,
@ -166,6 +173,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&pioB_clk,
 	&pioC_clk,
 	&adc_clk,
+	&adc_op_clk,
 	&usart0_clk,
 	&usart1_clk,
 	&usart2_clk,
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@ -17,12 +17,15 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>

+#include <linux/platform_data/at91_adc.h>
+
 #include <mach/board.h>
 #include <mach/cpu.h>
 #include <mach/at91sam9260.h>
 #include <mach/at91sam9260_matrix.h>
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/at91_adc.h>

 #include "generic.h"

@ -1340,6 +1343,93 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 void __init at91_add_device_cf(struct at91_cf_data * data) {}
 #endif

+/* --------------------------------------------------------------------
+ *  ADCs
+ * -------------------------------------------------------------------- */
+
+#if IS_ENABLED(CONFIG_AT91_ADC)
+static struct at91_adc_data adc_data;
+
+static struct resource adc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_ADC,
+		.end	= AT91SAM9260_BASE_ADC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_ADC,
+		.end	= AT91SAM9260_ID_ADC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_adc_device = {
+	.name		= "at91_adc",
+	.id		= -1,
+	.dev		= {
+				.platform_data		= &adc_data,
+	},
+	.resource	= adc_resources,
+	.num_resources	= ARRAY_SIZE(adc_resources),
+};
+
+static struct at91_adc_trigger at91_adc_triggers[] = {
+	[0] = {
+		.name = "timer-counter-0",
+		.value = AT91_ADC_TRGSEL_TC0 | AT91_ADC_TRGEN,
+	},
+	[1] = {
+		.name = "timer-counter-1",
+		.value = AT91_ADC_TRGSEL_TC1 | AT91_ADC_TRGEN,
+	},
+	[2] = {
+		.name = "timer-counter-2",
+		.value = AT91_ADC_TRGSEL_TC2 | AT91_ADC_TRGEN,
+	},
+	[3] = {
+		.name = "external",
+		.value = AT91_ADC_TRGSEL_EXTERNAL | AT91_ADC_TRGEN,
+		.is_external = true,
+	},
+};
+
+static struct at91_adc_reg_desc at91_adc_register_g20 = {
+	.channel_base = AT91_ADC_CHR(0),
+	.drdy_mask = AT91_ADC_DRDY,
+	.status_register = AT91_ADC_SR,
+	.trigger_register = AT91_ADC_MR,
+};
+
+void __init at91_add_device_adc(struct at91_adc_data *data)
+{
+	if (!data)
+		return;
+
+	if (test_bit(0, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PC0, 0);
+	if (test_bit(1, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PC1, 0);
+	if (test_bit(2, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PC2, 0);
+	if (test_bit(3, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PC3, 0);
+
+	if (data->use_external_triggers)
+		at91_set_A_periph(AT91_PIN_PA22, 0);
+
+	data->num_channels = 4;
+	data->startup_time = 10;
+	data->registers = &at91_adc_register_g20;
+	data->trigger_number = 4;
+	data->trigger_list = at91_adc_triggers;
+
+	adc_data = *data;
+	platform_device_register(&at91_adc_device);
+}
+#else
+void __init at91_add_device_adc(struct at91_adc_data *data) {}
+#endif
+
 /* -------------------------------------------------------------------- */
 /*
 * These devices are always present and don't need any board-specific
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@ -176,6 +176,12 @@ static struct clk vdec_clk = {
 	.type		= CLK_TYPE_PERIPHERAL,
 };

+static struct clk adc_op_clk = {
+	.name		= "adc_op_clk",
+	.type		= CLK_TYPE_PERIPHERAL,
+	.rate_hz	= 13200000,
+};
+
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
 	&pioB_clk,
@ -204,6 +210,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&isi_clk,
 	&udphs_clk,
 	&mmc1_clk,
+	&adc_op_clk,
 	// irq0
 };

@ -242,6 +249,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_ID("pioC", &pioC_clk),
 	CLKDEV_CON_ID("pioD", &pioDE_clk),
 	CLKDEV_CON_ID("pioE", &pioDE_clk),
+	/* Fake adc clock */
+	CLKDEV_CON_ID("adc_clk", &tsc_clk),
 };

 static struct clk_lookup usart_clocks_lookups[] = {
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@ -19,9 +19,12 @@
 #include <linux/i2c-gpio.h>
 #include <linux/atmel-mci.h>

+#include <linux/platform_data/at91_adc.h>
+
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>

+#include <mach/at91_adc.h>
 #include <mach/board.h>
 #include <mach/at91sam9g45.h>
 #include <mach/at91sam9g45_matrix.h>
@ -1181,6 +1184,104 @@ void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
 #endif


+/* --------------------------------------------------------------------
+ *  ADC
+ * -------------------------------------------------------------------- */
+
+#if IS_ENABLED(CONFIG_AT91_ADC)
+static struct at91_adc_data adc_data;
+
+static struct resource adc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TSC,
+		.end	= AT91SAM9G45_BASE_TSC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TSC,
+		.end	= AT91SAM9G45_ID_TSC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device at91_adc_device = {
+	.name		= "at91_adc",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &adc_data,
+	},
+	.resource	= adc_resources,
+	.num_resources	= ARRAY_SIZE(adc_resources),
+};
+
+static struct at91_adc_trigger at91_adc_triggers[] = {
+	[0] = {
+		.name = "external-rising",
+		.value = 1,
+		.is_external = true,
+	},
+	[1] = {
+		.name = "external-falling",
+		.value = 2,
+		.is_external = true,
+	},
+	[2] = {
+		.name = "external-any",
+		.value = 3,
+		.is_external = true,
+	},
+	[3] = {
+		.name = "continuous",
+		.value = 6,
+		.is_external = false,
+	},
+};
+
+static struct at91_adc_reg_desc at91_adc_register_g45 = {
+	.channel_base = AT91_ADC_CHR(0),
+	.drdy_mask = AT91_ADC_DRDY,
+	.status_register = AT91_ADC_SR,
+	.trigger_register = 0x08,
+};
+
+void __init at91_add_device_adc(struct at91_adc_data *data)
+{
+	if (!data)
+		return;
+
+	if (test_bit(0, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD20, 0);
+	if (test_bit(1, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD21, 0);
+	if (test_bit(2, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD22, 0);
+	if (test_bit(3, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD23, 0);
+	if (test_bit(4, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD24, 0);
+	if (test_bit(5, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD25, 0);
+	if (test_bit(6, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD26, 0);
+	if (test_bit(7, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD27, 0);
+
+	if (data->use_external_triggers)
+		at91_set_A_periph(AT91_PIN_PD28, 0);
+
+	data->num_channels = 8;
+	data->startup_time = 40;
+	data->registers = &at91_adc_register_g45;
+	data->trigger_number = 4;
+	data->trigger_list = at91_adc_triggers;
+
+	adc_data = *data;
+	platform_device_register(&at91_adc_device);
+}
+#else
+void __init at91_add_device_adc(struct at91_adc_data *data) {}
+#endif
+
 /* --------------------------------------------------------------------
 *  RTT
 * -------------------------------------------------------------------- */
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@ -120,6 +120,11 @@ static struct clk adc_clk = {
 	.pmc_mask	= 1 << AT91SAM9X5_ID_ADC,
 	.type	= CLK_TYPE_PERIPHERAL,
 };
+static struct clk adc_op_clk = {
+	.name		= "adc_op_clk",
+	.type		= CLK_TYPE_PERIPHERAL,
+	.rate_hz	= 5000000,
+};
 static struct clk dma0_clk = {
 	.name		= "dma0_clk",
 	.pmc_mask	= 1 << AT91SAM9X5_ID_DMA0,
@ -205,6 +210,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&tcb0_clk,
 	&pwm_clk,
 	&adc_clk,
+	&adc_op_clk,
 	&dma0_clk,
 	&dma1_clk,
 	&uhphs_clk,
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@ -32,6 +32,8 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/consumer.h>

+#include <linux/platform_data/at91_adc.h>
+
 #include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@ -304,6 +306,16 @@ static void __init ek_add_device_buttons(void)
 static void __init ek_add_device_buttons(void) {}
 #endif

+/*
+ * ADCs
+ */
+
+static struct at91_adc_data ek_adc_data = {
+	.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3),
+	.use_external_triggers = true,
+	.vref = 3300,
+};
+
 #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
 static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
 	REGULATOR_SUPPLY("AVDD", "0-001b"),
@ -389,6 +401,8 @@ static void __init ek_board_init(void)
 	ek_add_device_gpio_leds();
 	/* Push Buttons */
 	ek_add_device_buttons();
+	/* ADCs */
+	at91_add_device_adc(&ek_adc_data);
 	/* PCK0 provides MCLK to the WM8731 */
 	at91_set_B_periph(AT91_PIN_PC1, 0);
 	/* SSC (for WM8731) */
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@ -27,6 +27,8 @@
 #include <linux/atmel-mci.h>
 #include <linux/delay.h>

+#include <linux/platform_data/at91_adc.h>
+
 #include <mach/hardware.h>
 #include <video/atmel_lcdc.h>
 #include <media/soc_camera.h>
@ -305,6 +307,14 @@ static struct at91_tsadcc_data ek_tsadcc_data = {
 	.ts_sample_hold_time	= 0x0a,
 };

+/*
+ * ADCs
+ */
+static struct at91_adc_data ek_adc_data = {
+	.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7),
+	.use_external_triggers = true,
+	.vref = 3300,
+};

 /*
 * GPIO Buttons
@ -476,6 +486,8 @@ static void __init ek_board_init(void)
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Touch Screen */
 	at91_add_device_tsadcc(&ek_tsadcc_data);
+	/* ADC */
+	at91_add_device_adc(&ek_adc_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
 	/* AC97 */
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@ -144,4 +144,8 @@ source "drivers/extcon/Kconfig"

 source "drivers/memory/Kconfig"

+source "drivers/iio/Kconfig"
+
+source "drivers/vme/Kconfig"
+
 endmenu
--- a/drivers/Makefile
+++ b/drivers/Makefile
@ -136,3 +136,5 @@ obj-$(CONFIG_HYPERV)		+= hv/
 obj-$(CONFIG_PM_DEVFREQ)	+= devfreq/
 obj-$(CONFIG_EXTCON)		+= extcon/
 obj-$(CONFIG_MEMORY)		+= memory/
+obj-$(CONFIG_IIO)		+= iio/
+obj-$(CONFIG_VME_BUS)		+= vme/
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@ -585,14 +585,6 @@ config DEVPORT

 source "drivers/s390/char/Kconfig"

-config RAMOOPS
-	tristate "Log panic/oops to a RAM buffer"
-	depends on HAS_IOMEM
-	default n
-	help
-	  This enables panic and oops messages to be logged to a circular
-	  buffer in RAM where it can be read back at some later point.
-
 config MSM_SMD_PKT
 	bool "Enable device interface for some SMD packet ports"
 	default n
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@ -58,7 +58,6 @@ obj-$(CONFIG_HANGCHECK_TIMER)	+= hangcheck-timer.o
 obj-$(CONFIG_TCG_TPM)		+= tpm/

 obj-$(CONFIG_PS3_FLASH)		+= ps3flash.o
-obj-$(CONFIG_RAMOOPS)		+= ramoops.o

 obj-$(CONFIG_JS_RTC)		+= js-rtc.o
 js-rtc-y = rtc.o
--- a/drivers/char/ramoops.c
+++ b/drivers/char/ramoops.c
@ -1,250 +0,0 @@
-/*
- * RAM Oops/Panic logger
- *
- * Copyright (C) 2010 Marco Stornelli <marco.stornelli@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/kmsg_dump.h>
-#include <linux/time.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/ramoops.h>
-
-#define RAMOOPS_KERNMSG_HDR "===="
-#define MIN_MEM_SIZE 4096UL
-
-static ulong record_size = MIN_MEM_SIZE;
-module_param(record_size, ulong, 0400);
-MODULE_PARM_DESC(record_size,
-		"size of each dump done on oops/panic");
-
-static ulong mem_address;
-module_param(mem_address, ulong, 0400);
-MODULE_PARM_DESC(mem_address,
-		"start of reserved RAM used to store oops/panic logs");
-
-static ulong mem_size;
-module_param(mem_size, ulong, 0400);
-MODULE_PARM_DESC(mem_size,
-		"size of reserved RAM used to store oops/panic logs");
-
-static int dump_oops = 1;
-module_param(dump_oops, int, 0600);
-MODULE_PARM_DESC(dump_oops,
-		"set to 1 to dump oopses, 0 to only dump panics (default 1)");
-
-static struct ramoops_context {
-	struct kmsg_dumper dump;
-	void *virt_addr;
-	phys_addr_t phys_addr;
-	unsigned long size;
-	unsigned long record_size;
-	int dump_oops;
-	int count;
-	int max_count;
-} oops_cxt;
-
-static struct platform_device *dummy;
-static struct ramoops_platform_data *dummy_data;
-
-static void ramoops_do_dump(struct kmsg_dumper *dumper,
-		enum kmsg_dump_reason reason, const char *s1, unsigned long l1,
-		const char *s2, unsigned long l2)
-{
-	struct ramoops_context *cxt = container_of(dumper,
-			struct ramoops_context, dump);
-	unsigned long s1_start, s2_start;
-	unsigned long l1_cpy, l2_cpy;
-	int res, hdr_size;
-	char *buf, *buf_orig;
-	struct timeval timestamp;
-
-	if (reason != KMSG_DUMP_OOPS &&
-	    reason != KMSG_DUMP_PANIC)
-		return;
-
-	/* Only dump oopses if dump_oops is set */
-	if (reason == KMSG_DUMP_OOPS && !cxt->dump_oops)
-		return;
-
-	buf = cxt->virt_addr + (cxt->count * cxt->record_size);
-	buf_orig = buf;
-
-	memset(buf, '\0', cxt->record_size);
-	res = sprintf(buf, "%s", RAMOOPS_KERNMSG_HDR);
-	buf += res;
-	do_gettimeofday(&timestamp);
-	res = sprintf(buf, "%lu.%lu\n", (long)timestamp.tv_sec, (long)timestamp.tv_usec);
-	buf += res;
-
-	hdr_size = buf - buf_orig;
-	l2_cpy = min(l2, cxt->record_size - hdr_size);
-	l1_cpy = min(l1, cxt->record_size - hdr_size - l2_cpy);
-
-	s2_start = l2 - l2_cpy;
-	s1_start = l1 - l1_cpy;
-
-	memcpy(buf, s1 + s1_start, l1_cpy);
-	memcpy(buf + l1_cpy, s2 + s2_start, l2_cpy);
-
-	cxt->count = (cxt->count + 1) % cxt->max_count;
-}
-
-static int __init ramoops_probe(struct platform_device *pdev)
-{
-	struct ramoops_platform_data *pdata = pdev->dev.platform_data;
-	struct ramoops_context *cxt = &oops_cxt;
-	int err = -EINVAL;
-
-	if (!pdata->mem_size || !pdata->record_size) {
-		pr_err("The memory size and the record size must be "
-			"non-zero\n");
-		goto fail3;
-	}
-
-	pdata->mem_size = rounddown_pow_of_two(pdata->mem_size);
-	pdata->record_size = rounddown_pow_of_two(pdata->record_size);
-
-	/* Check for the minimum memory size */
-	if (pdata->mem_size < MIN_MEM_SIZE &&
-			pdata->record_size < MIN_MEM_SIZE) {
-		pr_err("memory size too small, minium is %lu\n", MIN_MEM_SIZE);
-		goto fail3;
-	}
-
-	if (pdata->mem_size < pdata->record_size) {
-		pr_err("The memory size must be larger than the "
-			"records size\n");
-		goto fail3;
-	}
-
-	cxt->max_count = pdata->mem_size / pdata->record_size;
-	cxt->count = 0;
-	cxt->size = pdata->mem_size;
-	cxt->phys_addr = pdata->mem_address;
-	cxt->record_size = pdata->record_size;
-	cxt->dump_oops = pdata->dump_oops;
-
-	if (!request_mem_region(cxt->phys_addr, cxt->size, "ramoops")) {
-		pr_err("request mem region failed\n");
-		err = -EINVAL;
-		goto fail3;
-	}
-
-	cxt->virt_addr = ioremap(cxt->phys_addr,  cxt->size);
-	if (!cxt->virt_addr) {
-		pr_err("ioremap failed\n");
-		goto fail2;
-	}
-
-	cxt->dump.dump = ramoops_do_dump;
-	err = kmsg_dump_register(&cxt->dump);
-	if (err) {
-		pr_err("registering kmsg dumper failed\n");
-		goto fail1;
-	}
-
-	/*
-	 * Update the module parameter variables as well so they are visible
-	 * through /sys/module/ramoops/parameters/
-	 */
-	mem_size = pdata->mem_size;
-	mem_address = pdata->mem_address;
-	record_size = pdata->record_size;
-	dump_oops = pdata->dump_oops;
-
-	return 0;
-
-fail1:
-	iounmap(cxt->virt_addr);
-fail2:
-	release_mem_region(cxt->phys_addr, cxt->size);
-fail3:
-	return err;
-}
-
-static int __exit ramoops_remove(struct platform_device *pdev)
-{
-	struct ramoops_context *cxt = &oops_cxt;
-
-	if (kmsg_dump_unregister(&cxt->dump) < 0)
-		pr_warn("could not unregister kmsg_dumper\n");
-
-	iounmap(cxt->virt_addr);
-	release_mem_region(cxt->phys_addr, cxt->size);
-	return 0;
-}
-
-static struct platform_driver ramoops_driver = {
-	.remove		= __exit_p(ramoops_remove),
-	.driver		= {
-		.name	= "ramoops",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init ramoops_init(void)
-{
-	int ret;
-	ret = platform_driver_probe(&ramoops_driver, ramoops_probe);
-	if (ret == -ENODEV) {
-		/*
-		 * If we didn't find a platform device, we use module parameters
-		 * building platform data on the fly.
-		 */
-		pr_info("platform device not found, using module parameters\n");
-		dummy_data = kzalloc(sizeof(struct ramoops_platform_data),
-				     GFP_KERNEL);
-		if (!dummy_data)
-			return -ENOMEM;
-		dummy_data->mem_size = mem_size;
-		dummy_data->mem_address = mem_address;
-		dummy_data->record_size = record_size;
-		dummy_data->dump_oops = dump_oops;
-		dummy = platform_create_bundle(&ramoops_driver, ramoops_probe,
-			NULL, 0, dummy_data,
-			sizeof(struct ramoops_platform_data));
-
-		if (IS_ERR(dummy))
-			ret = PTR_ERR(dummy);
-		else
-			ret = 0;
-	}
-
-	return ret;
-}
-
-static void __exit ramoops_exit(void)
-{
-	platform_driver_unregister(&ramoops_driver);
-	kfree(dummy_data);
-}
-
-module_init(ramoops_init);
-module_exit(ramoops_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marco Stornelli <marco.stornelli@gmail.com>");
-MODULE_DESCRIPTION("RAM Oops/Panic logger/driver");
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@ -0,0 +1,54 @@
+#
+# Industrial I/O subsytem configuration
+#
+
+menuconfig IIO
+	tristate "Industrial I/O support"
+	depends on GENERIC_HARDIRQS
+	help
+	  The industrial I/O subsystem provides a unified framework for
+	  drivers for many different types of embedded sensors using a
+	  number of different physical interfaces (i2c, spi, etc). See
+	  Documentation/iio for more information.
+
+if IIO
+
+config IIO_BUFFER
+	bool "Enable buffer support within IIO"
+	help
+	  Provide core support for various buffer based data
+	  acquisition methods.
+
+if IIO_BUFFER
+
+config IIO_KFIFO_BUF
+	select IIO_TRIGGER
+	tristate "Industrial I/O buffering based on kfifo"
+	help
+	  A simple fifo based on kfifo.  Use this if you want a fifo
+	  rather than a ring buffer. Note that this currently provides
+	  no buffer events so it is up to userspace to work out how
+	  often to read from the buffer.
+
+endif # IIO_BUFFER
+
+config IIO_TRIGGER
+	boolean "Enable triggered sampling support"
+	help
+	  Provides IIO core support for triggers.  Currently these
+	  are used to initialize capture of samples to push into
+	  ring buffers.  The triggers are effectively a 'capture
+	  data now' interrupt.
+
+config IIO_CONSUMERS_PER_TRIGGER
+       int "Maximum number of consumers per trigger"
+       depends on IIO_TRIGGER
+       default "2"
+       help
+	This value controls the maximum number of consumers that a
+	given trigger may handle. Default is 2.
+
+source "drivers/iio/adc/Kconfig"
+source "drivers/iio/amplifiers/Kconfig"
+
+endif # IIO
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@ -0,0 +1,13 @@
+#
+# Makefile for the industrial I/O core.
+#
+
+obj-$(CONFIG_IIO) += industrialio.o
+industrialio-y := industrialio-core.o industrialio-event.o inkern.o
+industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o
+industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o
+
+obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
+
+obj-y += adc/
+obj-y += amplifiers/
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@ -0,0 +1,16 @@
+#
+# ADC drivers
+#
+menu "Analog to digital converters"
+
+config AT91_ADC
+	tristate "Atmel AT91 ADC"
+	depends on ARCH_AT91
+	select IIO_BUFFER
+	select IIO_KFIFO_BUF
+	select IIO_TRIGGER
+	select SYSFS
+	help
+	  Say yes here to build support for Atmel AT91 ADC.
+
+endmenu
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@ -0,0 +1,5 @@
+#
+# Makefile for IIO ADC drivers
+#
+
+obj-$(CONFIG_AT91_ADC) += at91_adc.o
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@ -0,0 +1,802 @@
+/*
+ * Driver for the ADC present in the Atmel AT91 evaluation boards.
+ *
+ * Copyright 2011 Free Electrons
+ *
+ * Licensed under the GPLv2 or later.
+ */
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+
+#include <linux/platform_data/at91_adc.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+
+#include <mach/at91_adc.h>
+
+#define AT91_ADC_CHAN(st, ch) \
+	(st->registers->channel_base + (ch * 4))
+#define at91_adc_readl(st, reg) \
+	(readl_relaxed(st->reg_base + reg))
+#define at91_adc_writel(st, reg, val) \
+	(writel_relaxed(val, st->reg_base + reg))
+
+struct at91_adc_state {
+	struct clk		*adc_clk;
+	u16			*buffer;
+	unsigned long		channels_mask;
+	struct clk		*clk;
+	bool			done;
+	int			irq;
+	bool			irq_enabled;
+	u16			last_value;
+	struct mutex		lock;
+	u8			num_channels;
+	void __iomem		*reg_base;
+	struct at91_adc_reg_desc *registers;
+	u8			startup_time;
+	struct iio_trigger	**trig;
+	struct at91_adc_trigger	*trigger_list;
+	u32			trigger_number;
+	bool			use_external;
+	u32			vref_mv;
+	wait_queue_head_t	wq_data_avail;
+};
+
+static irqreturn_t at91_adc_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *idev = pf->indio_dev;
+	struct at91_adc_state *st = iio_priv(idev);
+	struct iio_buffer *buffer = idev->buffer;
+	int i, j = 0;
+
+	for (i = 0; i < idev->masklength; i++) {
+		if (!test_bit(i, idev->active_scan_mask))
+			continue;
+		st->buffer[j] = at91_adc_readl(st, AT91_ADC_CHAN(st, i));
+		j++;
+	}
+
+	if (idev->scan_timestamp) {
+		s64 *timestamp = (s64 *)((u8 *)st->buffer +
+					ALIGN(j, sizeof(s64)));
+		*timestamp = pf->timestamp;
+	}
+
+	buffer->access->store_to(buffer, (u8 *)st->buffer, pf->timestamp);
+
+	iio_trigger_notify_done(idev->trig);
+	st->irq_enabled = true;
+
+	/* Needed to ACK the DRDY interruption */
+	at91_adc_readl(st, AT91_ADC_LCDR);
+
+	enable_irq(st->irq);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t at91_adc_eoc_trigger(int irq, void *private)
+{
+	struct iio_dev *idev = private;
+	struct at91_adc_state *st = iio_priv(idev);
+	u32 status = at91_adc_readl(st, st->registers->status_register);
+
+	if (!(status & st->registers->drdy_mask))
+		return IRQ_HANDLED;
+
+	if (iio_buffer_enabled(idev)) {
+		disable_irq_nosync(irq);
+		st->irq_enabled = false;
+		iio_trigger_poll(idev->trig, iio_get_time_ns());
+	} else {
+		st->last_value = at91_adc_readl(st, AT91_ADC_LCDR);
+		st->done = true;
+		wake_up_interruptible(&st->wq_data_avail);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int at91_adc_channel_init(struct iio_dev *idev)
+{
+	struct at91_adc_state *st = iio_priv(idev);
+	struct iio_chan_spec *chan_array, *timestamp;
+	int bit, idx = 0;
+
+	idev->num_channels = bitmap_weight(&st->channels_mask,
+					   st->num_channels) + 1;
+
+	chan_array = devm_kzalloc(&idev->dev,
+				  ((idev->num_channels + 1) *
+					sizeof(struct iio_chan_spec)),
+				  GFP_KERNEL);
+
+	if (!chan_array)
+		return -ENOMEM;
+
+	for_each_set_bit(bit, &st->channels_mask, st->num_channels) {
+		struct iio_chan_spec *chan = chan_array + idx;
+
+		chan->type = IIO_VOLTAGE;
+		chan->indexed = 1;
+		chan->channel = bit;
+		chan->scan_index = idx;
+		chan->scan_type.sign = 'u';
+		chan->scan_type.realbits = 10;
+		chan->scan_type.storagebits = 16;
+		chan->info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |
+			IIO_CHAN_INFO_RAW_SEPARATE_BIT;
+		idx++;
+	}
+	timestamp = chan_array + idx;
+
+	timestamp->type = IIO_TIMESTAMP;
+	timestamp->channel = -1;
+	timestamp->scan_index = idx;
+	timestamp->scan_type.sign = 's';
+	timestamp->scan_type.realbits = 64;
+	timestamp->scan_type.storagebits = 64;
+
+	idev->channels = chan_array;
+	return idev->num_channels;
+}
+
+static u8 at91_adc_get_trigger_value_by_name(struct iio_dev *idev,
+					     struct at91_adc_trigger *triggers,
+					     const char *trigger_name)
+{
+	struct at91_adc_state *st = iio_priv(idev);
+	u8 value = 0;
+	int i;
+
+	for (i = 0; i < st->trigger_number; i++) {
+		char *name = kasprintf(GFP_KERNEL,
+				"%s-dev%d-%s",
+				idev->name,
+				idev->id,
+				triggers[i].name);
+		if (!name)
+			return -ENOMEM;
+
+		if (strcmp(trigger_name, name) == 0) {
+			value = triggers[i].value;
+			kfree(name);
+			break;
+		}
+
+		kfree(name);
+	}
+
+	return value;
+}
+
+static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
+{
+	struct iio_dev *idev = trig->private_data;
+	struct at91_adc_state *st = iio_priv(idev);
+	struct iio_buffer *buffer = idev->buffer;
+	struct at91_adc_reg_desc *reg = st->registers;
+	u32 status = at91_adc_readl(st, reg->trigger_register);
+	u8 value;
+	u8 bit;
+
+	value = at91_adc_get_trigger_value_by_name(idev,
+						   st->trigger_list,
+						   idev->trig->name);
+	if (value == 0)
+		return -EINVAL;
+
+	if (state) {
+		st->buffer = kmalloc(idev->scan_bytes, GFP_KERNEL);
+		if (st->buffer == NULL)
+			return -ENOMEM;
+
+		at91_adc_writel(st, reg->trigger_register,
+				status | value);
+
+		for_each_set_bit(bit, buffer->scan_mask,
+				 st->num_channels) {
+			struct iio_chan_spec const *chan = idev->channels + bit;
+			at91_adc_writel(st, AT91_ADC_CHER,
+					AT91_ADC_CH(chan->channel));
+		}
+
+		at91_adc_writel(st, AT91_ADC_IER, reg->drdy_mask);
+
+	} else {
+		at91_adc_writel(st, AT91_ADC_IDR, reg->drdy_mask);
+
+		at91_adc_writel(st, reg->trigger_register,
+				status & ~value);
+
+		for_each_set_bit(bit, buffer->scan_mask,
+				 st->num_channels) {
+			struct iio_chan_spec const *chan = idev->channels + bit;
+			at91_adc_writel(st, AT91_ADC_CHDR,
+					AT91_ADC_CH(chan->channel));
+		}
+		kfree(st->buffer);
+	}
+
+	return 0;
+}
+
+static const struct iio_trigger_ops at91_adc_trigger_ops = {
+	.owner = THIS_MODULE,
+	.set_trigger_state = &at91_adc_configure_trigger,
+};
+
+static struct iio_trigger *at91_adc_allocate_trigger(struct iio_dev *idev,
+						     struct at91_adc_trigger *trigger)
+{
+	struct iio_trigger *trig;
+	int ret;
+
+	trig = iio_trigger_alloc("%s-dev%d-%s", idev->name,
+				 idev->id, trigger->name);
+	if (trig == NULL)
+		return NULL;
+
+	trig->dev.parent = idev->dev.parent;
+	trig->private_data = idev;
+	trig->ops = &at91_adc_trigger_ops;
+
+	ret = iio_trigger_register(trig);
+	if (ret)
+		return NULL;
+
+	return trig;
+}
+
+static int at91_adc_trigger_init(struct iio_dev *idev)
+{
+	struct at91_adc_state *st = iio_priv(idev);
+	int i, ret;
+
+	st->trig = devm_kzalloc(&idev->dev,
+				st->trigger_number * sizeof(st->trig),
+				GFP_KERNEL);
+
+	if (st->trig == NULL) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+
+	for (i = 0; i < st->trigger_number; i++) {
+		if (st->trigger_list[i].is_external && !(st->use_external))
+			continue;
+
+		st->trig[i] = at91_adc_allocate_trigger(idev,
+							st->trigger_list + i);
+		if (st->trig[i] == NULL) {
+			dev_err(&idev->dev,
+				"Could not allocate trigger %d\n", i);
+			ret = -ENOMEM;
+			goto error_trigger;
+		}
+	}
+
+	return 0;
+
+error_trigger:
+	for (i--; i >= 0; i--) {
+		iio_trigger_unregister(st->trig[i]);
+		iio_trigger_free(st->trig[i]);
+	}
+error_ret:
+	return ret;
+}
+
+static void at91_adc_trigger_remove(struct iio_dev *idev)
+{
+	struct at91_adc_state *st = iio_priv(idev);
+	int i;
+
+	for (i = 0; i < st->trigger_number; i++) {
+		iio_trigger_unregister(st->trig[i]);
+		iio_trigger_free(st->trig[i]);
+	}
+}
+
+static const struct iio_buffer_setup_ops at91_adc_buffer_ops = {
+	.preenable = &iio_sw_buffer_preenable,
+	.postenable = &iio_triggered_buffer_postenable,
+	.predisable = &iio_triggered_buffer_predisable,
+};
+
+static int at91_adc_buffer_init(struct iio_dev *idev)
+{
+	int ret;
+
+	idev->buffer = iio_kfifo_allocate(idev);
+	if (!idev->buffer) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+
+	idev->pollfunc = iio_alloc_pollfunc(&iio_pollfunc_store_time,
+					    &at91_adc_trigger_handler,
+					    IRQF_ONESHOT,
+					    idev,
+					    "%s-consumer%d",
+					    idev->name,
+					    idev->id);
+	if (idev->pollfunc == NULL) {
+		ret = -ENOMEM;
+		goto error_pollfunc;
+	}
+
+	idev->setup_ops = &at91_adc_buffer_ops;
+	idev->modes |= INDIO_BUFFER_TRIGGERED;
+
+	ret = iio_buffer_register(idev,
+				  idev->channels,
+				  idev->num_channels);
+	if (ret)
+		goto error_register;
+
+	return 0;
+
+error_register:
+	iio_dealloc_pollfunc(idev->pollfunc);
+error_pollfunc:
+	iio_kfifo_free(idev->buffer);
+error_ret:
+	return ret;
+}
+
+static void at91_adc_buffer_remove(struct iio_dev *idev)
+{
+	iio_buffer_unregister(idev);
+	iio_dealloc_pollfunc(idev->pollfunc);
+	iio_kfifo_free(idev->buffer);
+}
+
+static int at91_adc_read_raw(struct iio_dev *idev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	struct at91_adc_state *st = iio_priv(idev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&st->lock);
+
+		at91_adc_writel(st, AT91_ADC_CHER,
+				AT91_ADC_CH(chan->channel));
+		at91_adc_writel(st, AT91_ADC_IER, st->registers->drdy_mask);
+		at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_START);
+
+		ret = wait_event_interruptible_timeout(st->wq_data_avail,
+						       st->done,
+						       msecs_to_jiffies(1000));
+		if (ret == 0)
+			return -ETIMEDOUT;
+		else if (ret < 0)
+			return ret;
+
+		*val = st->last_value;
+
+		at91_adc_writel(st, AT91_ADC_CHDR,
+				AT91_ADC_CH(chan->channel));
+		at91_adc_writel(st, AT91_ADC_IDR, st->registers->drdy_mask);
+
+		st->last_value = 0;
+		st->done = false;
+		mutex_unlock(&st->lock);
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = (st->vref_mv * 1000) >> chan->scan_type.realbits;
+		*val2 = 0;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		break;
+	}
+	return -EINVAL;
+}
+
+static int at91_adc_probe_dt(struct at91_adc_state *st,
+			     struct platform_device *pdev)
+{
+	struct iio_dev *idev = iio_priv_to_dev(st);
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *trig_node;
+	int i = 0, ret;
+	u32 prop;
+
+	if (!node)
+		return -EINVAL;
+
+	st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers");
+
+	if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) {
+		dev_err(&idev->dev, "Missing adc-channels-used property in the DT.\n");
+		ret = -EINVAL;
+		goto error_ret;
+	}
+	st->channels_mask = prop;
+
+	if (of_property_read_u32(node, "atmel,adc-num-channels", &prop)) {
+		dev_err(&idev->dev, "Missing adc-num-channels property in the DT.\n");
+		ret = -EINVAL;
+		goto error_ret;
+	}
+	st->num_channels = prop;
+
+	if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) {
+		dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n");
+		ret = -EINVAL;
+		goto error_ret;
+	}
+	st->startup_time = prop;
+
+
+	if (of_property_read_u32(node, "atmel,adc-vref", &prop)) {
+		dev_err(&idev->dev, "Missing adc-vref property in the DT.\n");
+		ret = -EINVAL;
+		goto error_ret;
+	}
+	st->vref_mv = prop;
+
+	st->registers = devm_kzalloc(&idev->dev,
+				     sizeof(struct at91_adc_reg_desc),
+				     GFP_KERNEL);
+	if (!st->registers) {
+		dev_err(&idev->dev, "Could not allocate register memory.\n");
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+
+	if (of_property_read_u32(node, "atmel,adc-channel-base", &prop)) {
+		dev_err(&idev->dev, "Missing adc-channel-base property in the DT.\n");
+		ret = -EINVAL;
+		goto error_ret;
+	}
+	st->registers->channel_base = prop;
+
+	if (of_property_read_u32(node, "atmel,adc-drdy-mask", &prop)) {
+		dev_err(&idev->dev, "Missing adc-drdy-mask property in the DT.\n");
+		ret = -EINVAL;
+		goto error_ret;
+	}
+	st->registers->drdy_mask = prop;
+
+	if (of_property_read_u32(node, "atmel,adc-status-register", &prop)) {
+		dev_err(&idev->dev, "Missing adc-status-register property in the DT.\n");
+		ret = -EINVAL;
+		goto error_ret;
+	}
+	st->registers->status_register = prop;
+
+	if (of_property_read_u32(node, "atmel,adc-trigger-register", &prop)) {
+		dev_err(&idev->dev, "Missing adc-trigger-register property in the DT.\n");
+		ret = -EINVAL;
+		goto error_ret;
+	}
+	st->registers->trigger_register = prop;
+
+	st->trigger_number = of_get_child_count(node);
+	st->trigger_list = devm_kzalloc(&idev->dev, st->trigger_number *
+					sizeof(struct at91_adc_trigger),
+					GFP_KERNEL);
+	if (!st->trigger_list) {
+		dev_err(&idev->dev, "Could not allocate trigger list memory.\n");
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+
+	for_each_child_of_node(node, trig_node) {
+		struct at91_adc_trigger *trig = st->trigger_list + i;
+		const char *name;
+
+		if (of_property_read_string(trig_node, "trigger-name", &name)) {
+			dev_err(&idev->dev, "Missing trigger-name property in the DT.\n");
+			ret = -EINVAL;
+			goto error_ret;
+		}
+	        trig->name = name;
+
+		if (of_property_read_u32(trig_node, "trigger-value", &prop)) {
+			dev_err(&idev->dev, "Missing trigger-value property in the DT.\n");
+			ret = -EINVAL;
+			goto error_ret;
+		}
+	        trig->value = prop;
+		trig->is_external = of_property_read_bool(trig_node, "trigger-external");
+		i++;
+	}
+
+	return 0;
+
+error_ret:
+	return ret;
+}
+
+static int at91_adc_probe_pdata(struct at91_adc_state *st,
+				struct platform_device *pdev)
+{
+	struct at91_adc_data *pdata = pdev->dev.platform_data;
+
+	if (!pdata)
+		return -EINVAL;
+
+	st->use_external = pdata->use_external_triggers;
+	st->vref_mv = pdata->vref;
+	st->channels_mask = pdata->channels_used;
+	st->num_channels = pdata->num_channels;
+	st->startup_time = pdata->startup_time;
+	st->trigger_number = pdata->trigger_number;
+	st->trigger_list = pdata->trigger_list;
+	st->registers = pdata->registers;
+
+	return 0;
+}
+
+static const struct iio_info at91_adc_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = &at91_adc_read_raw,
+};
+
+static int __devinit at91_adc_probe(struct platform_device *pdev)
+{
+	unsigned int prsc, mstrclk, ticks, adc_clk;
+	int ret;
+	struct iio_dev *idev;
+	struct at91_adc_state *st;
+	struct resource *res;
+
+	idev = iio_device_alloc(sizeof(struct at91_adc_state));
+	if (idev == NULL) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+
+	st = iio_priv(idev);
+
+	if (pdev->dev.of_node)
+		ret = at91_adc_probe_dt(st, pdev);
+	else
+		ret = at91_adc_probe_pdata(st, pdev);
+
+	if (ret) {
+		dev_err(&pdev->dev, "No platform data available.\n");
+		ret = -EINVAL;
+		goto error_free_device;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "No resource defined\n");
+		ret = -ENXIO;
+		goto error_ret;
+	}
+
+	platform_set_drvdata(pdev, idev);
+
+	idev->dev.parent = &pdev->dev;
+	idev->name = dev_name(&pdev->dev);
+	idev->modes = INDIO_DIRECT_MODE;
+	idev->info = &at91_adc_info;
+
+	st->irq = platform_get_irq(pdev, 0);
+	if (st->irq < 0) {
+		dev_err(&pdev->dev, "No IRQ ID is designated\n");
+		ret = -ENODEV;
+		goto error_free_device;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res),
+				"AT91 adc registers")) {
+		dev_err(&pdev->dev, "Resources are unavailable.\n");
+		ret = -EBUSY;
+		goto error_free_device;
+	}
+
+	st->reg_base = ioremap(res->start, resource_size(res));
+	if (!st->reg_base) {
+		dev_err(&pdev->dev, "Failed to map registers.\n");
+		ret = -ENOMEM;
+		goto error_release_mem;
+	}
+
+	/*
+	 * Disable all IRQs before setting up the handler
+	 */
+	at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_SWRST);
+	at91_adc_writel(st, AT91_ADC_IDR, 0xFFFFFFFF);
+	ret = request_irq(st->irq,
+			  at91_adc_eoc_trigger,
+			  0,
+			  pdev->dev.driver->name,
+			  idev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to allocate IRQ.\n");
+		goto error_unmap_reg;
+	}
+
+	st->clk = clk_get(&pdev->dev, "adc_clk");
+	if (IS_ERR(st->clk)) {
+		dev_err(&pdev->dev, "Failed to get the clock.\n");
+		ret = PTR_ERR(st->clk);
+		goto error_free_irq;
+	}
+
+	ret = clk_prepare(st->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not prepare the clock.\n");
+		goto error_free_clk;
+	}
+
+	ret = clk_enable(st->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not enable the clock.\n");
+		goto error_unprepare_clk;
+	}
+
+	st->adc_clk = clk_get(&pdev->dev, "adc_op_clk");
+	if (IS_ERR(st->adc_clk)) {
+		dev_err(&pdev->dev, "Failed to get the ADC clock.\n");
+		ret = PTR_ERR(st->clk);
+		goto error_disable_clk;
+	}
+
+	ret = clk_prepare(st->adc_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not prepare the ADC clock.\n");
+		goto error_free_adc_clk;
+	}
+
+	ret = clk_enable(st->adc_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not enable the ADC clock.\n");
+		goto error_unprepare_adc_clk;
+	}
+
+	/*
+	 * Prescaler rate computation using the formula from the Atmel's
+	 * datasheet : ADC Clock = MCK / ((Prescaler + 1) * 2), ADC Clock being
+	 * specified by the electrical characteristics of the board.
+	 */
+	mstrclk = clk_get_rate(st->clk);
+	adc_clk = clk_get_rate(st->adc_clk);
+	prsc = (mstrclk / (2 * adc_clk)) - 1;
+
+	if (!st->startup_time) {
+		dev_err(&pdev->dev, "No startup time available.\n");
+		ret = -EINVAL;
+		goto error_disable_adc_clk;
+	}
+
+	/*
+	 * Number of ticks needed to cover the startup time of the ADC as
+	 * defined in the electrical characteristics of the board, divided by 8.
+	 * The formula thus is : Startup Time = (ticks + 1) * 8 / ADC Clock
+	 */
+	ticks = round_up((st->startup_time * adc_clk /
+			  1000000) - 1, 8) / 8;
+	at91_adc_writel(st, AT91_ADC_MR,
+			(AT91_ADC_PRESCAL_(prsc) & AT91_ADC_PRESCAL) |
+			(AT91_ADC_STARTUP_(ticks) & AT91_ADC_STARTUP));
+
+	/* Setup the ADC channels available on the board */
+	ret = at91_adc_channel_init(idev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Couldn't initialize the channels.\n");
+		goto error_disable_adc_clk;
+	}
+
+	init_waitqueue_head(&st->wq_data_avail);
+	mutex_init(&st->lock);
+
+	ret = at91_adc_buffer_init(idev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Couldn't initialize the buffer.\n");
+		goto error_disable_adc_clk;
+	}
+
+	ret = at91_adc_trigger_init(idev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Couldn't setup the triggers.\n");
+		goto error_unregister_buffer;
+	}
+
+	ret = iio_device_register(idev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Couldn't register the device.\n");
+		goto error_remove_triggers;
+	}
+
+	return 0;
+
+error_remove_triggers:
+	at91_adc_trigger_remove(idev);
+error_unregister_buffer:
+	at91_adc_buffer_remove(idev);
+error_disable_adc_clk:
+	clk_disable(st->adc_clk);
+error_unprepare_adc_clk:
+	clk_unprepare(st->adc_clk);
+error_free_adc_clk:
+	clk_put(st->adc_clk);
+error_disable_clk:
+	clk_disable(st->clk);
+error_unprepare_clk:
+	clk_unprepare(st->clk);
+error_free_clk:
+	clk_put(st->clk);
+error_free_irq:
+	free_irq(st->irq, idev);
+error_unmap_reg:
+	iounmap(st->reg_base);
+error_release_mem:
+	release_mem_region(res->start, resource_size(res));
+error_free_device:
+	iio_device_free(idev);
+error_ret:
+	return ret;
+}
+
+static int __devexit at91_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *idev = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct at91_adc_state *st = iio_priv(idev);
+
+	iio_device_unregister(idev);
+	at91_adc_trigger_remove(idev);
+	at91_adc_buffer_remove(idev);
+	clk_disable_unprepare(st->adc_clk);
+	clk_put(st->adc_clk);
+	clk_disable(st->clk);
+	clk_unprepare(st->clk);
+	clk_put(st->clk);
+	free_irq(st->irq, idev);
+	iounmap(st->reg_base);
+	release_mem_region(res->start, resource_size(res));
+	iio_device_free(idev);
+
+	return 0;
+}
+
+static const struct of_device_id at91_adc_dt_ids[] = {
+	{ .compatible = "atmel,at91sam9260-adc" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, at91_adc_dt_ids);
+
+static struct platform_driver at91_adc_driver = {
+	.probe = at91_adc_probe,
+	.remove = __devexit_p(at91_adc_remove),
+	.driver = {
+		   .name = "at91_adc",
+		   .of_match_table = of_match_ptr(at91_adc_dt_ids),
+	},
+};
+
+module_platform_driver(at91_adc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Atmel AT91 ADC Driver");
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
--- a/drivers/iio/amplifiers/Kconfig
+++ b/drivers/iio/amplifiers/Kconfig
@ -0,0 +1,17 @@
+#
+# Gain Amplifiers, etc.
+#
+menu "Amplifiers"
+
+config AD8366
+	tristate "Analog Devices AD8366 VGA"
+	depends on SPI
+	select BITREVERSE
+	help
+	  Say yes here to build support for Analog Devices AD8366
+	  SPI Dual-Digital Variable Gain Amplifier (VGA).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad8366.
+
+endmenu
--- a/drivers/iio/amplifiers/Makefile
+++ b/drivers/iio/amplifiers/Makefile
@ -0,0 +1,5 @@
+#
+# Makefile iio/amplifiers
+#
+
+obj-$(CONFIG_AD8366) += ad8366.o
--- a/drivers/iio/amplifiers/ad8366.c
+++ b/drivers/iio/amplifiers/ad8366.c
@ -0,0 +1,222 @@
+/*
+ * AD8366 SPI Dual-Digital Variable Gain Amplifier (VGA)
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/bitrev.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+struct ad8366_state {
+	struct spi_device	*spi;
+	struct regulator	*reg;
+	unsigned char		ch[2];
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	unsigned char		data[2] ____cacheline_aligned;
+};
+
+static int ad8366_write(struct iio_dev *indio_dev,
+			unsigned char ch_a, char unsigned ch_b)
+{
+	struct ad8366_state *st = iio_priv(indio_dev);
+	int ret;
+
+	ch_a = bitrev8(ch_a & 0x3F);
+	ch_b = bitrev8(ch_b & 0x3F);
+
+	st->data[0] = ch_b >> 4;
+	st->data[1] = (ch_b << 4) | (ch_a >> 2);
+
+	ret = spi_write(st->spi, st->data, ARRAY_SIZE(st->data));
+	if (ret < 0)
+		dev_err(&indio_dev->dev, "write failed (%d)", ret);
+
+	return ret;
+}
+
+static int ad8366_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val,
+			   int *val2,
+			   long m)
+{
+	struct ad8366_state *st = iio_priv(indio_dev);
+	int ret;
+	unsigned code;
+
+	mutex_lock(&indio_dev->mlock);
+	switch (m) {
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		code = st->ch[chan->channel];
+
+		/* Values in dB */
+		code = code * 253 + 4500;
+		*val = code / 1000;
+		*val2 = (code % 1000) * 1000;
+
+		ret = IIO_VAL_INT_PLUS_MICRO_DB;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+};
+
+static int ad8366_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val,
+			    int val2,
+			    long mask)
+{
+	struct ad8366_state *st = iio_priv(indio_dev);
+	unsigned code;
+	int ret;
+
+	if (val < 0 || val2 < 0)
+		return -EINVAL;
+
+	/* Values in dB */
+	code = (((u8)val * 1000) + ((u32)val2 / 1000));
+
+	if (code > 20500 || code < 4500)
+		return -EINVAL;
+
+	code = (code - 4500) / 253;
+
+	mutex_lock(&indio_dev->mlock);
+	switch (mask) {
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		st->ch[chan->channel] = code;
+		ret = ad8366_write(indio_dev, st->ch[0], st->ch[1]);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
+static const struct iio_info ad8366_info = {
+	.read_raw = &ad8366_read_raw,
+	.write_raw = &ad8366_write_raw,
+	.driver_module = THIS_MODULE,
+};
+
+#define AD8366_CHAN(_channel) {				\
+	.type = IIO_VOLTAGE,				\
+	.output = 1,					\
+	.indexed = 1,					\
+	.channel = _channel,				\
+	.info_mask = IIO_CHAN_INFO_HARDWAREGAIN_SEPARATE_BIT,\
+}
+
+static const struct iio_chan_spec ad8366_channels[] = {
+	AD8366_CHAN(0),
+	AD8366_CHAN(1),
+};
+
+static int __devinit ad8366_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct ad8366_state *st;
+	int ret;
+
+	indio_dev = iio_device_alloc(sizeof(*st));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	st->reg = regulator_get(&spi->dev, "vcc");
+	if (!IS_ERR(st->reg)) {
+		ret = regulator_enable(st->reg);
+		if (ret)
+			goto error_put_reg;
+	}
+
+	spi_set_drvdata(spi, indio_dev);
+	st->spi = spi;
+
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->info = &ad8366_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = ad8366_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ad8366_channels);
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_disable_reg;
+
+	ad8366_write(indio_dev, 0 , 0);
+
+	return 0;
+
+error_disable_reg:
+	if (!IS_ERR(st->reg))
+		regulator_disable(st->reg);
+error_put_reg:
+	if (!IS_ERR(st->reg))
+		regulator_put(st->reg);
+
+	iio_device_free(indio_dev);
+
+	return ret;
+}
+
+static int __devexit ad8366_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ad8366_state *st = iio_priv(indio_dev);
+	struct regulator *reg = st->reg;
+
+	iio_device_unregister(indio_dev);
+
+	if (!IS_ERR(reg)) {
+		regulator_disable(reg);
+		regulator_put(reg);
+	}
+
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static const struct spi_device_id ad8366_id[] = {
+	{"ad8366", 0},
+	{}
+};
+
+static struct spi_driver ad8366_driver = {
+	.driver = {
+		.name	= KBUILD_MODNAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ad8366_probe,
+	.remove		= __devexit_p(ad8366_remove),
+	.id_table	= ad8366_id,
+};
+
+module_spi_driver(ad8366_driver);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("Analog Devices AD8366 VGA");
+MODULE_LICENSE("GPL v2");
--- a/drivers/staging/iio/iio_core.h
+++ b/drivers/staging/iio/iio_core.h
@ -12,6 +12,12 @@

 #ifndef _IIO_CORE_H_
 #define _IIO_CORE_H_
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+struct iio_chan_spec;
+struct iio_dev;
+

 int __iio_add_chan_devattr(const char *postfix,
 			   struct iio_chan_spec const *chan,
--- a/drivers/staging/iio/iio_core_trigger.h
+++ b/drivers/staging/iio/iio_core_trigger.h
--- a/drivers/staging/iio/industrialio-buffer.c
+++ b/drivers/staging/iio/industrialio-buffer.c
@ -21,10 +21,10 @@
 #include <linux/slab.h>
 #include <linux/poll.h>

-#include "iio.h"
+#include <linux/iio/iio.h>
 #include "iio_core.h"
-#include "sysfs.h"
-#include "buffer.h"
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>

 static const char * const iio_endian_prefix[] = {
 	[IIO_BE] = "be",
@ -105,7 +105,7 @@ static ssize_t iio_scan_el_show(struct device *dev,
 				char *buf)
 {
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);

 	ret = test_bit(to_iio_dev_attr(attr)->address,
 		       indio_dev->buffer->scan_mask);
@ -124,13 +124,15 @@ static ssize_t iio_scan_el_store(struct device *dev,
 				 const char *buf,
 				 size_t len)
 {
-	int ret = 0;
+	int ret;
 	bool state;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_buffer *buffer = indio_dev->buffer;
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);

-	state = !(buf[0] == '0');
+	ret = strtobool(buf, &state);
+	if (ret < 0)
+		return ret;
 	mutex_lock(&indio_dev->mlock);
 	if (iio_buffer_enabled(indio_dev)) {
 		ret = -EBUSY;
@ -160,7 +162,7 @@ static ssize_t iio_scan_el_ts_show(struct device *dev,
 				   struct device_attribute *attr,
 				   char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	return sprintf(buf, "%d\n", indio_dev->buffer->scan_timestamp);
 }

@ -169,17 +171,21 @@ static ssize_t iio_scan_el_ts_store(struct device *dev,
 				    const char *buf,
 				    size_t len)
 {
-	int ret = 0;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	int ret;
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	bool state;

-	state = !(buf[0] == '0');
+	ret = strtobool(buf, &state);
+	if (ret < 0)
+		return ret;
+
 	mutex_lock(&indio_dev->mlock);
 	if (iio_buffer_enabled(indio_dev)) {
 		ret = -EBUSY;
 		goto error_ret;
 	}
 	indio_dev->buffer->scan_timestamp = state;
+	indio_dev->scan_timestamp = state;
 error_ret:
 	mutex_unlock(&indio_dev->mlock);

@ -291,7 +297,7 @@ int iio_buffer_register(struct iio_dev *indio_dev,
 				goto error_cleanup_dynamic;
 			attrcount += ret;
 			if (channels[i].type == IIO_TIMESTAMP)
-				buffer->scan_index_timestamp =
+				indio_dev->scan_index_timestamp =
 					channels[i].scan_index;
 		}
 		if (indio_dev->masklength && buffer->scan_mask == NULL) {
@ -346,7 +352,7 @@ ssize_t iio_buffer_read_length(struct device *dev,
 			       struct device_attribute *attr,
 			       char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_buffer *buffer = indio_dev->buffer;

 	if (buffer->access->get_length)
@ -364,7 +370,7 @@ ssize_t iio_buffer_write_length(struct device *dev,
 {
 	int ret;
 	ulong val;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_buffer *buffer = indio_dev->buffer;

 	ret = strict_strtoul(buf, 10, &val);
@ -397,7 +403,7 @@ ssize_t iio_buffer_store_enable(struct device *dev,
 	int ret;
 	bool requested_state, current_state;
 	int previous_mode;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_buffer *buffer = indio_dev->buffer;

 	mutex_lock(&indio_dev->mlock);
@ -483,7 +489,7 @@ ssize_t iio_buffer_show_enable(struct device *dev,
 			       struct device_attribute *attr,
 			       char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	return sprintf(buf, "%d\n", iio_buffer_enabled(indio_dev));
 }
 EXPORT_SYMBOL(iio_buffer_show_enable);
@ -503,30 +509,41 @@ static const unsigned long *iio_scan_mask_match(const unsigned long *av_masks,
 	return NULL;
 }

-int iio_sw_buffer_preenable(struct iio_dev *indio_dev)
+static int iio_compute_scan_bytes(struct iio_dev *indio_dev, const long *mask,
+				  bool timestamp)
 {
-	struct iio_buffer *buffer = indio_dev->buffer;
 	const struct iio_chan_spec *ch;
 	unsigned bytes = 0;
 	int length, i;
+
+	/* How much space will the demuxed element take? */
+	for_each_set_bit(i, mask,
+			 indio_dev->masklength) {
+		ch = iio_find_channel_from_si(indio_dev, i);
+		length = ch->scan_type.storagebits / 8;
+		bytes = ALIGN(bytes, length);
+		bytes += length;
+	}
+	if (timestamp) {
+		ch = iio_find_channel_from_si(indio_dev,
+					      indio_dev->scan_index_timestamp);
+		length = ch->scan_type.storagebits / 8;
+		bytes = ALIGN(bytes, length);
+		bytes += length;
+	}
+	return bytes;
+}
+
+int iio_sw_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct iio_buffer *buffer = indio_dev->buffer;
 	dev_dbg(&indio_dev->dev, "%s\n", __func__);

 	/* How much space will the demuxed element take? */
-	for_each_set_bit(i, buffer->scan_mask,
-			 indio_dev->masklength) {
-		ch = iio_find_channel_from_si(indio_dev, i);
-		length = ch->scan_type.storagebits/8;
-		bytes = ALIGN(bytes, length);
-		bytes += length;
-	}
-	if (buffer->scan_timestamp) {
-		ch = iio_find_channel_from_si(indio_dev,
-					      buffer->scan_index_timestamp);
-		length = ch->scan_type.storagebits/8;
-		bytes = ALIGN(bytes, length);
-		bytes += length;
-	}
-	buffer->access->set_bytes_per_datum(buffer, bytes);
+	indio_dev->scan_bytes =
+		iio_compute_scan_bytes(indio_dev, buffer->scan_mask,
+				       buffer->scan_timestamp);
+	buffer->access->set_bytes_per_datum(buffer, indio_dev->scan_bytes);

 	/* What scan mask do we actually have ?*/
 	if (indio_dev->available_scan_masks)
@ -638,19 +655,25 @@ int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data,
 }
 EXPORT_SYMBOL_GPL(iio_push_to_buffer);

+static void iio_buffer_demux_free(struct iio_buffer *buffer)
+{
+	struct iio_demux_table *p, *q;
+	list_for_each_entry_safe(p, q, &buffer->demux_list, l) {
+		list_del(&p->l);
+		kfree(p);
+	}
+}
+
 int iio_update_demux(struct iio_dev *indio_dev)
 {
 	const struct iio_chan_spec *ch;
 	struct iio_buffer *buffer = indio_dev->buffer;
 	int ret, in_ind = -1, out_ind, length;
 	unsigned in_loc = 0, out_loc = 0;
-	struct iio_demux_table *p, *q;
+	struct iio_demux_table *p;

 	/* Clear out any old demux */
-	list_for_each_entry_safe(p, q, &buffer->demux_list, l) {
-		list_del(&p->l);
-		kfree(p);
-	}
+	iio_buffer_demux_free(buffer);
 	kfree(buffer->demux_bounce);
 	buffer->demux_bounce = NULL;

@ -704,7 +727,7 @@ int iio_update_demux(struct iio_dev *indio_dev)
 			goto error_clear_mux_table;
 		}
 		ch = iio_find_channel_from_si(indio_dev,
-			buffer->scan_index_timestamp);
+			indio_dev->scan_index_timestamp);
 		length = ch->scan_type.storagebits/8;
 		if (out_loc % length)
 			out_loc += length - out_loc % length;
@ -725,10 +748,8 @@ int iio_update_demux(struct iio_dev *indio_dev)
 	return 0;

 error_clear_mux_table:
-	list_for_each_entry_safe(p, q, &buffer->demux_list, l) {
-		list_del(&p->l);
-		kfree(p);
-	}
+	iio_buffer_demux_free(buffer);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(iio_update_demux);
--- a/drivers/staging/iio/industrialio-core.c
+++ b/drivers/staging/iio/industrialio-core.c
@ -23,11 +23,11 @@
 #include <linux/slab.h>
 #include <linux/anon_inodes.h>
 #include <linux/debugfs.h>
-#include "iio.h"
+#include <linux/iio/iio.h>
 #include "iio_core.h"
 #include "iio_core_trigger.h"
-#include "sysfs.h"
-#include "events.h"
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>

 /* IDA to assign each registered device a unique id*/
 static DEFINE_IDA(iio_ida);
@ -42,11 +42,6 @@ EXPORT_SYMBOL(iio_bus_type);

 static struct dentry *iio_debugfs_dentry;

-static const char * const iio_data_type_name[] = {
-	[IIO_RAW] = "raw",
-	[IIO_PROCESSED] = "input",
-};
-
 static const char * const iio_direction[] = {
 	[0] = "in",
 	[1] = "out",
@ -68,6 +63,7 @@ static const char * const iio_chan_type_name_spec[] = {
 	[IIO_ANGL] = "angl",
 	[IIO_TIMESTAMP] = "timestamp",
 	[IIO_CAPACITANCE] = "capacitance",
+	[IIO_ALTVOLTAGE] = "altvoltage",
 };

 static const char * const iio_modifier_names[] = {
@ -80,6 +76,8 @@ static const char * const iio_modifier_names[] = {

 /* relies on pairs of these shared then separate */
 static const char * const iio_chan_info_postfix[] = {
+	[IIO_CHAN_INFO_RAW] = "raw",
+	[IIO_CHAN_INFO_PROCESSED] = "input",
 	[IIO_CHAN_INFO_SCALE] = "scale",
 	[IIO_CHAN_INFO_OFFSET] = "offset",
 	[IIO_CHAN_INFO_CALIBSCALE] = "calibscale",
@ -90,6 +88,10 @@ static const char * const iio_chan_info_postfix[] = {
 	[IIO_CHAN_INFO_AVERAGE_RAW] = "mean_raw",
 	[IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY]
 	= "filter_low_pass_3db_frequency",
+	[IIO_CHAN_INFO_SAMP_FREQ] = "sampling_frequency",
+	[IIO_CHAN_INFO_FREQUENCY] = "frequency",
+	[IIO_CHAN_INFO_PHASE] = "phase",
+	[IIO_CHAN_INFO_HARDWAREGAIN] = "hardwaregain",
 };

 const struct iio_chan_spec
@ -151,14 +153,6 @@ static void __exit iio_exit(void)
 }

 #if defined(CONFIG_DEBUG_FS)
-static int iio_debugfs_open(struct inode *inode, struct file *file)
-{
-	if (inode->i_private)
-		file->private_data = inode->i_private;
-
-	return 0;
-}
-
 static ssize_t iio_debugfs_read_reg(struct file *file, char __user *userbuf,
 			      size_t count, loff_t *ppos)
 {
@ -217,7 +211,7 @@ static ssize_t iio_debugfs_write_reg(struct file *file,
 }

 static const struct file_operations iio_debugfs_reg_fops = {
-	.open = iio_debugfs_open,
+	.open = simple_open,
 	.read = iio_debugfs_read_reg,
 	.write = iio_debugfs_write_reg,
 };
@ -234,15 +228,12 @@ static int iio_device_register_debugfs(struct iio_dev *indio_dev)
 	if (indio_dev->info->debugfs_reg_access == NULL)
 		return 0;

-	if (IS_ERR(iio_debugfs_dentry))
+	if (!iio_debugfs_dentry)
 		return 0;

 	indio_dev->debugfs_dentry =
 		debugfs_create_dir(dev_name(&indio_dev->dev),
 				   iio_debugfs_dentry);
-	if (IS_ERR(indio_dev->debugfs_dentry))
-		return PTR_ERR(indio_dev->debugfs_dentry);
-
 	if (indio_dev->debugfs_dentry == NULL) {
 		dev_warn(indio_dev->dev.parent,
 			 "Failed to create debugfs directory\n");
@ -274,13 +265,13 @@ static ssize_t iio_read_channel_ext_info(struct device *dev,
 				     struct device_attribute *attr,
 				     char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	const struct iio_chan_spec_ext_info *ext_info;

 	ext_info = &this_attr->c->ext_info[this_attr->address];

-	return ext_info->read(indio_dev, this_attr->c, buf);
+	return ext_info->read(indio_dev, ext_info->private, this_attr->c, buf);
 }

 static ssize_t iio_write_channel_ext_info(struct device *dev,
@ -288,42 +279,50 @@ static ssize_t iio_write_channel_ext_info(struct device *dev,
 				     const char *buf,
 					 size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	const struct iio_chan_spec_ext_info *ext_info;

 	ext_info = &this_attr->c->ext_info[this_attr->address];

-	return ext_info->write(indio_dev, this_attr->c, buf, len);
+	return ext_info->write(indio_dev, ext_info->private,
+			       this_attr->c, buf, len);
 }

 static ssize_t iio_read_channel_info(struct device *dev,
 				     struct device_attribute *attr,
 				     char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int val, val2;
+	bool scale_db = false;
 	int ret = indio_dev->info->read_raw(indio_dev, this_attr->c,
 					    &val, &val2, this_attr->address);

 	if (ret < 0)
 		return ret;

-	if (ret == IIO_VAL_INT)
+	switch (ret) {
+	case IIO_VAL_INT:
 		return sprintf(buf, "%d\n", val);
-	else if (ret == IIO_VAL_INT_PLUS_MICRO) {
+	case IIO_VAL_INT_PLUS_MICRO_DB:
+		scale_db = true;
+	case IIO_VAL_INT_PLUS_MICRO:
 		if (val2 < 0)
-			return sprintf(buf, "-%d.%06u\n", val, -val2);
+			return sprintf(buf, "-%d.%06u%s\n", val, -val2,
+				scale_db ? " dB" : "");
 		else
-			return sprintf(buf, "%d.%06u\n", val, val2);
-	} else if (ret == IIO_VAL_INT_PLUS_NANO) {
+			return sprintf(buf, "%d.%06u%s\n", val, val2,
+				scale_db ? " dB" : "");
+	case IIO_VAL_INT_PLUS_NANO:
 		if (val2 < 0)
 			return sprintf(buf, "-%d.%09u\n", val, -val2);
 		else
 			return sprintf(buf, "%d.%09u\n", val, val2);
-	} else
+	default:
 		return 0;
+	}
 }

 static ssize_t iio_write_channel_info(struct device *dev,
@ -331,7 +330,7 @@ static ssize_t iio_write_channel_info(struct device *dev,
 				      const char *buf,
 				      size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret, integer = 0, fract = 0, fract_mult = 100000;
 	bool integer_part = true, negative = false;
@ -575,25 +574,12 @@ error_ret:
 static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
 					struct iio_chan_spec const *chan)
 {
-	int ret, i, attrcount = 0;
+	int ret, attrcount = 0;
+	int i;
 	const struct iio_chan_spec_ext_info *ext_info;

 	if (chan->channel < 0)
 		return 0;
-
-	ret = __iio_add_chan_devattr(iio_data_type_name[chan->processed_val],
-				     chan,
-				     &iio_read_channel_info,
-				     (chan->output ?
-				      &iio_write_channel_info : NULL),
-				     0,
-				     0,
-				     &indio_dev->dev,
-				     &indio_dev->channel_attr_list);
-	if (ret)
-		goto error_ret;
-	attrcount++;
-
 	for_each_set_bit(i, &chan->info_mask, sizeof(long)*8) {
 		ret = __iio_add_chan_devattr(iio_chan_info_postfix[i/2],
 					     chan,
@ -652,7 +638,7 @@ static ssize_t iio_show_dev_name(struct device *dev,
 				 struct device_attribute *attr,
 				 char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	return sprintf(buf, "%s\n", indio_dev->name);
 }

@ -738,7 +724,7 @@ static void iio_device_unregister_sysfs(struct iio_dev *indio_dev)

 static void iio_dev_release(struct device *device)
 {
-	struct iio_dev *indio_dev = container_of(device, struct iio_dev, dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(device);
 	cdev_del(&indio_dev->chrdev);
 	if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
 		iio_device_unregister_trigger_consumer(indio_dev);
@ -752,7 +738,7 @@ static struct device_type iio_dev_type = {
 	.release = iio_dev_release,
 };

-struct iio_dev *iio_allocate_device(int sizeof_priv)
+struct iio_dev *iio_device_alloc(int sizeof_priv)
 {
 	struct iio_dev *dev;
 	size_t alloc_size;
@ -788,16 +774,16 @@ struct iio_dev *iio_allocate_device(int sizeof_priv)

 	return dev;
 }
-EXPORT_SYMBOL(iio_allocate_device);
+EXPORT_SYMBOL(iio_device_alloc);

-void iio_free_device(struct iio_dev *dev)
+void iio_device_free(struct iio_dev *dev)
 {
 	if (dev) {
 		ida_simple_remove(&iio_ida, dev->id);
 		kfree(dev);
 	}
 }
-EXPORT_SYMBOL(iio_free_device);
+EXPORT_SYMBOL(iio_device_free);

 /**
 * iio_chrdev_open() - chrdev file open for buffer access and ioctls
--- a/drivers/staging/iio/industrialio-event.c
+++ b/drivers/staging/iio/industrialio-event.c
@ -20,10 +20,10 @@
 #include <linux/slab.h>
 #include <linux/uaccess.h>
 #include <linux/wait.h>
-#include "iio.h"
+#include <linux/iio/iio.h>
 #include "iio_core.h"
-#include "sysfs.h"
-#include "events.h"
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>

 /**
 * struct iio_event_interface - chrdev interface for an event line
@ -186,7 +186,7 @@ static ssize_t iio_ev_state_store(struct device *dev,
 				  const char *buf,
 				  size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
 	bool val;
@ -205,7 +205,7 @@ static ssize_t iio_ev_state_show(struct device *dev,
 				 struct device_attribute *attr,
 				 char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int val = indio_dev->info->read_event_config(indio_dev,
 						     this_attr->address);
@ -220,7 +220,7 @@ static ssize_t iio_ev_value_show(struct device *dev,
 				 struct device_attribute *attr,
 				 char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int val, ret;

@ -237,7 +237,7 @@ static ssize_t iio_ev_value_store(struct device *dev,
 				  const char *buf,
 				  size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	unsigned long val;
 	int ret;
--- a/drivers/staging/iio/industrialio-trigger.c
+++ b/drivers/staging/iio/industrialio-trigger.c
@ -15,11 +15,11 @@
 #include <linux/list.h>
 #include <linux/slab.h>

-#include "iio.h"
-#include "trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "iio_core.h"
 #include "iio_core_trigger.h"
-#include "trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>

 /* RFC - Question of approach
 * Make the common case (single sensor single trigger)
@ -310,7 +310,7 @@ static ssize_t iio_trigger_read_current(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);

 	if (indio_dev->trig)
 		return sprintf(buf, "%s\n", indio_dev->trig->name);
@ -329,7 +329,7 @@ static ssize_t iio_trigger_write_current(struct device *dev,
 					 const char *buf,
 					 size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_trigger *oldtrig = indio_dev->trig;
 	struct iio_trigger *trig;
 	int ret;
@ -360,9 +360,9 @@ static ssize_t iio_trigger_write_current(struct device *dev,
 	indio_dev->trig = trig;

 	if (oldtrig && indio_dev->trig != oldtrig)
-		iio_put_trigger(oldtrig);
+		iio_trigger_put(oldtrig);
 	if (indio_dev->trig)
-		iio_get_trigger(indio_dev->trig);
+		iio_trigger_get(indio_dev->trig);

 	return len;
 }
@ -426,7 +426,7 @@ static void iio_trig_subirqunmask(struct irq_data *d)
 	trig->subirqs[d->irq - trig->subirq_base].enabled = true;
 }

-struct iio_trigger *iio_allocate_trigger(const char *fmt, ...)
+struct iio_trigger *iio_trigger_alloc(const char *fmt, ...)
 {
 	va_list vargs;
 	struct iio_trigger *trig;
@ -472,14 +472,14 @@ struct iio_trigger *iio_allocate_trigger(const char *fmt, ...)
 	}
 	return trig;
 }
-EXPORT_SYMBOL(iio_allocate_trigger);
+EXPORT_SYMBOL(iio_trigger_alloc);

-void iio_free_trigger(struct iio_trigger *trig)
+void iio_trigger_free(struct iio_trigger *trig)
 {
 	if (trig)
 		put_device(&trig->dev);
 }
-EXPORT_SYMBOL(iio_free_trigger);
+EXPORT_SYMBOL(iio_trigger_free);

 void iio_device_register_trigger_consumer(struct iio_dev *indio_dev)
 {
@ -491,7 +491,7 @@ void iio_device_unregister_trigger_consumer(struct iio_dev *indio_dev)
 {
 	/* Clean up and associated but not attached triggers references */
 	if (indio_dev->trig)
-		iio_put_trigger(indio_dev->trig);
+		iio_trigger_put(indio_dev->trig);
 }

 int iio_triggered_buffer_postenable(struct iio_dev *indio_dev)
--- a/drivers/staging/iio/inkern.c
+++ b/drivers/staging/iio/inkern.c
@ -11,11 +11,11 @@
 #include <linux/slab.h>
 #include <linux/mutex.h>

-#include "iio.h"
+#include <linux/iio/iio.h>
 #include "iio_core.h"
-#include "machine.h"
-#include "driver.h"
-#include "consumer.h"
+#include <linux/iio/machine.h>
+#include <linux/iio/driver.h>
+#include <linux/iio/consumer.h>

 struct iio_map_internal {
 	struct iio_dev *indio_dev;
--- a/drivers/staging/iio/kfifo_buf.c
+++ b/drivers/staging/iio/kfifo_buf.c
@ -5,8 +5,7 @@
 #include <linux/workqueue.h>
 #include <linux/kfifo.h>
 #include <linux/mutex.h>
-
-#include "kfifo_buf.h"
+#include <linux/iio/kfifo_buf.h>

 struct iio_kfifo {
 	struct iio_buffer buffer;
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@ -516,4 +516,5 @@ source "drivers/misc/ti-st/Kconfig"
 source "drivers/misc/lis3lv02d/Kconfig"
 source "drivers/misc/carma/Kconfig"
 source "drivers/misc/altera-stapl/Kconfig"
+source "drivers/misc/mei/Kconfig"
 endmenu
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@ -50,3 +50,4 @@ obj-y				+= lis3lv02d/
 obj-y				+= carma/
 obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
 obj-$(CONFIG_ALTERA_STAPL)	+=altera-stapl/
+obj-$(CONFIG_INTEL_MEI)		+= mei/
--- a/drivers/staging/mei/Kconfig
+++ b/drivers/staging/mei/Kconfig
--- a/drivers/staging/mei/Makefile
+++ b/drivers/staging/mei/Makefile
--- a/drivers/staging/mei/hw.h
+++ b/drivers/staging/mei/hw.h
--- a/drivers/staging/mei/init.c
+++ b/drivers/staging/mei/init.c
@ -22,7 +22,7 @@
 #include "mei_dev.h"
 #include "hw.h"
 #include "interface.h"
-#include "mei.h"
+#include <linux/mei.h>

 const uuid_le mei_amthi_guid  = UUID_LE(0x12f80028, 0xb4b7, 0x4b2d, 0xac,
 						0xa8, 0x46, 0xe0, 0xff, 0x65,
@ -200,7 +200,7 @@ int mei_hw_init(struct mei_device *dev)
 		if (!(dev->me_hw_state & ME_RDY_HRA))
 			dev_dbg(&dev->pdev->dev, "ME turn off ME_RDY.\n");

-		printk(KERN_ERR "mei: link layer initialization failed.\n");
+		dev_err(&dev->pdev->dev, "link layer initialization failed.\n");
 		ret = -ENODEV;
 		goto out;
 	}
--- a/drivers/staging/mei/interface.c
+++ b/drivers/staging/mei/interface.c
@ -16,7 +16,7 @@

 #include <linux/pci.h>
 #include "mei_dev.h"
-#include "mei.h"
+#include <linux/mei.h>
 #include "interface.h"


--- a/drivers/staging/mei/interface.h
+++ b/drivers/staging/mei/interface.h
@ -19,7 +19,7 @@
 #ifndef _MEI_INTERFACE_H_
 #define _MEI_INTERFACE_H_

-#include "mei.h"
+#include <linux/mei.h>
 #include "mei_dev.h"


@ -51,8 +51,7 @@ int mei_flow_ctrl_creds(struct mei_device *dev, struct mei_cl *cl);

 int mei_wd_send(struct mei_device *dev);
 int mei_wd_stop(struct mei_device *dev, bool preserve);
-bool mei_wd_host_init(struct mei_device *dev);
-void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout);
+int mei_wd_host_init(struct mei_device *dev);
 /*
 * mei_watchdog_register  - Registering watchdog interface
 *   once we got connection to the WD Client
--- a/drivers/staging/mei/interrupt.c
+++ b/drivers/staging/mei/interrupt.c
@ -22,7 +22,7 @@
 #include <linux/jiffies.h>

 #include "mei_dev.h"
-#include "mei.h"
+#include <linux/mei.h>
 #include "hw.h"
 #include "interface.h"

--- a/drivers/staging/mei/iorw.c
+++ b/drivers/staging/mei/iorw.c
@ -35,7 +35,7 @@

 #include "mei_dev.h"
 #include "hw.h"
-#include "mei.h"
+#include <linux/mei.h>
 #include "interface.h"


--- a/drivers/staging/mei/main.c
+++ b/drivers/staging/mei/main.c
@ -14,6 +14,8 @@
 *
 */

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
@ -36,19 +38,10 @@
 #include <linux/miscdevice.h>

 #include "mei_dev.h"
-#include "mei.h"
+#include <linux/mei.h>
 #include "interface.h"

-
-#define MEI_READ_TIMEOUT 45
-#define MEI_DRIVER_NAME	"mei"
-#define MEI_DEV_NAME "mei"
-
-/*
- *  mei driver strings
- */
-static char mei_driver_name[] = MEI_DRIVER_NAME;
-static const char mei_driver_string[] = "Intel(R) Management Engine Interface";
+static const char mei_driver_name[] = "mei";

 /* The device pointer */
 /* Currently this driver works as long as there is only a single AMT device. */
@ -931,7 +924,7 @@ static const struct file_operations mei_fops = {
 * Misc Device Struct
 */
 static struct miscdevice  mei_misc_device = {
-		.name = MEI_DRIVER_NAME,
+		.name = "mei",
 		.fops = &mei_fops,
 		.minor = MISC_DYNAMIC_MINOR,
 };
@ -958,7 +951,7 @@ static int __devinit mei_probe(struct pci_dev *pdev,
 	/* enable pci dev */
 	err = pci_enable_device(pdev);
 	if (err) {
-		printk(KERN_ERR "mei: Failed to enable pci device.\n");
+		dev_err(&pdev->dev, "failed to enable pci device.\n");
 		goto end;
 	}
 	/* set PCI host mastering  */
@ -966,7 +959,7 @@ static int __devinit mei_probe(struct pci_dev *pdev,
 	/* pci request regions for mei driver */
 	err = pci_request_regions(pdev, mei_driver_name);
 	if (err) {
-		printk(KERN_ERR "mei: Failed to get pci regions.\n");
+		dev_err(&pdev->dev, "failed to get pci regions.\n");
 		goto disable_device;
 	}
 	/* allocates and initializes the mei dev structure */
@ -978,7 +971,7 @@ static int __devinit mei_probe(struct pci_dev *pdev,
 	/* mapping  IO device memory */
 	dev->mem_addr = pci_iomap(pdev, 0, 0);
 	if (!dev->mem_addr) {
-		printk(KERN_ERR "mei: mapping I/O device memory failure.\n");
+		dev_err(&pdev->dev, "mapping I/O device memory failure.\n");
 		err = -ENOMEM;
 		goto free_device;
 	}
@ -997,13 +990,13 @@ static int __devinit mei_probe(struct pci_dev *pdev,
 			IRQF_SHARED, mei_driver_name, dev);

 	if (err) {
-		printk(KERN_ERR "mei: request_threaded_irq failure. irq = %d\n",
+		dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n",
 		       pdev->irq);
 		goto unmap_memory;
 	}
 	INIT_DELAYED_WORK(&dev->timer_work, mei_timer);
 	if (mei_hw_init(dev)) {
-		printk(KERN_ERR "mei: Init hw failure.\n");
+		dev_err(&pdev->dev, "init hw failure.\n");
 		err = -ENODEV;
 		goto release_irq;
 	}
@ -1020,7 +1013,7 @@ static int __devinit mei_probe(struct pci_dev *pdev,

 	mutex_unlock(&mei_mutex);

-	pr_debug("mei: Driver initialization successful.\n");
+	pr_debug("initialization successful.\n");

 	return 0;

@ -1041,7 +1034,7 @@ disable_device:
 	pci_disable_device(pdev);
 end:
 	mutex_unlock(&mei_mutex);
-	printk(KERN_ERR "mei: Driver initialization failed.\n");
+	dev_err(&pdev->dev, "initialization failed.\n");
 	return err;
 }

@ -1160,8 +1153,8 @@ static int mei_pci_resume(struct device *device)
 			IRQF_SHARED, mei_driver_name, dev);

 	if (err) {
-		printk(KERN_ERR "mei: Request_irq failure. irq = %d\n",
-		       pdev->irq);
+		dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n",
+				pdev->irq);
 		return err;
 	}

@ -1204,11 +1197,11 @@ static int __init mei_init_module(void)
 {
 	int ret;

-	pr_debug("mei: %s\n", mei_driver_string);
+	pr_debug("loading.\n");
 	/* init pci module */
 	ret = pci_register_driver(&mei_driver);
 	if (ret < 0)
-		printk(KERN_ERR "mei: Error registering driver.\n");
+		pr_err("error registering driver.\n");

 	return ret;
 }
@ -1226,7 +1219,7 @@ static void __exit mei_exit_module(void)
 	misc_deregister(&mei_misc_device);
 	pci_unregister_driver(&mei_driver);

-	pr_debug("mei: Driver unloaded successfully.\n");
+	pr_debug("unloaded successfully.\n");
 }

 module_exit(mei_exit_module);
--- a/drivers/staging/mei/mei_dev.h
+++ b/drivers/staging/mei/mei_dev.h
@ -19,7 +19,7 @@

 #include <linux/types.h>
 #include <linux/watchdog.h>
-#include "mei.h"
+#include <linux/mei.h>
 #include "hw.h"

 /*
--- a/drivers/staging/mei/wd.c
+++ b/drivers/staging/mei/wd.c
@ -24,7 +24,7 @@
 #include "mei_dev.h"
 #include "hw.h"
 #include "interface.h"
-#include "mei.h"
+#include <linux/mei.h>

 static const u8 mei_start_wd_params[] = { 0x02, 0x12, 0x13, 0x10 };
 static const u8 mei_stop_wd_params[] = { 0x02, 0x02, 0x14, 0x10 };
@ -45,23 +45,22 @@ const uuid_le mei_wd_guid = UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, 0x89,
 						0x9D, 0xA9, 0x15, 0x14, 0xCB,
 						0x32, 0xAB);

-void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout)
+static void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout)
 {
-	dev_dbg(&dev->pdev->dev, "timeout=%d.\n", timeout);
+	dev_dbg(&dev->pdev->dev, "wd: set timeout=%d.\n", timeout);
 	memcpy(dev->wd_data, mei_start_wd_params, MEI_WD_PARAMS_SIZE);
-	memcpy(dev->wd_data + MEI_WD_PARAMS_SIZE,
-			&timeout, sizeof(u16));
+	memcpy(dev->wd_data + MEI_WD_PARAMS_SIZE, &timeout, sizeof(u16));
 }

 /**
 * host_init_wd - mei initialization wd.
 *
 * @dev: the device structure
+ * returns -ENENT if wd client cannot be found
+ *         -EIO if write has failed
 */
-bool mei_wd_host_init(struct mei_device *dev)
+int mei_wd_host_init(struct mei_device *dev)
 {
-	bool ret = false;
-
 	mei_cl_init(&dev->wd_cl, dev);

 	/* look for WD client and connect to it */
@ -72,25 +71,21 @@ bool mei_wd_host_init(struct mei_device *dev)
 	mei_find_me_client_update_filext(dev, &dev->wd_cl,
 				&mei_wd_guid, MEI_WD_HOST_CLIENT_ID);

-	dev_dbg(&dev->pdev->dev, "check wd_cl\n");
-	if (MEI_FILE_CONNECTING == dev->wd_cl.state) {
-		if (mei_connect(dev, &dev->wd_cl)) {
-			dev_dbg(&dev->pdev->dev, "Failed to connect to WD client\n");
-			dev->wd_cl.state = MEI_FILE_DISCONNECTED;
-			dev->wd_cl.host_client_id = 0;
-			ret = false;
-			goto end;
-		} else {
-			dev->wd_cl.timer_count = CONNECT_TIMEOUT;
-		}
-	} else {
-		dev_dbg(&dev->pdev->dev, "Failed to find WD client\n");
-		ret = false;
-		goto end;
+	dev_dbg(&dev->pdev->dev, "wd: check client\n");
+	if (MEI_FILE_CONNECTING != dev->wd_cl.state) {
+		dev_info(&dev->pdev->dev, "wd: failed to find the client\n");
+		return -ENOENT;
 	}

-end:
-	return ret;
+	if (mei_connect(dev, &dev->wd_cl)) {
+		dev_err(&dev->pdev->dev, "wd: failed to connect to the client\n");
+		dev->wd_cl.state = MEI_FILE_DISCONNECTED;
+		dev->wd_cl.host_client_id = 0;
+		return -EIO;
+	}
+	dev->wd_cl.timer_count = CONNECT_TIMEOUT;
+
+	return 0;
 }

 /**
@ -159,7 +154,7 @@ int mei_wd_stop(struct mei_device *dev, bool preserve)
 			if (ret)
 				goto out;
 		} else {
-			dev_dbg(&dev->pdev->dev, "send stop WD failed\n");
+			dev_err(&dev->pdev->dev, "wd: send stop failed\n");
 		}

 		dev->wd_pending = false;
@ -173,13 +168,13 @@ int mei_wd_stop(struct mei_device *dev, bool preserve)
 					dev->wd_stopped, 10 * HZ);
 	mutex_lock(&dev->device_lock);
 	if (dev->wd_stopped) {
-		dev_dbg(&dev->pdev->dev, "stop wd complete ret=%d.\n", ret);
+		dev_dbg(&dev->pdev->dev, "wd: stop completed ret=%d.\n", ret);
 		ret = 0;
 	} else {
 		if (!ret)
 			ret = -ETIMEDOUT;
 		dev_warn(&dev->pdev->dev,
-			"stop wd failed to complete ret=%d.\n", ret);
+			"wd: stop failed to complete ret=%d.\n", ret);
 	}

 	if (preserve)
@ -208,13 +203,15 @@ static int mei_wd_ops_start(struct watchdog_device *wd_dev)
 	mutex_lock(&dev->device_lock);

 	if (dev->mei_state != MEI_ENABLED) {
-		dev_dbg(&dev->pdev->dev, "mei_state != MEI_ENABLED  mei_state= %d\n",
-		    dev->mei_state);
+		dev_dbg(&dev->pdev->dev,
+			"wd: mei_state != MEI_ENABLED  mei_state = %d\n",
+			dev->mei_state);
 		goto end_unlock;
 	}

 	if (dev->wd_cl.state != MEI_FILE_CONNECTED)	{
-		dev_dbg(&dev->pdev->dev, "MEI Driver is not connected to Watchdog Client\n");
+		dev_dbg(&dev->pdev->dev,
+			"MEI Driver is not connected to Watchdog Client\n");
 		goto end_unlock;
 	}

@ -267,7 +264,7 @@ static int mei_wd_ops_ping(struct watchdog_device *wd_dev)
 	mutex_lock(&dev->device_lock);

 	if (dev->wd_cl.state != MEI_FILE_CONNECTED) {
-		dev_dbg(&dev->pdev->dev, "wd is not connected.\n");
+		dev_err(&dev->pdev->dev, "wd: not connected.\n");
 		ret = -ENODEV;
 		goto end;
 	}
@ -277,16 +274,17 @@ static int mei_wd_ops_ping(struct watchdog_device *wd_dev)
 		mei_flow_ctrl_creds(dev, &dev->wd_cl) > 0) {

 		dev->mei_host_buffer_is_empty = false;
-		dev_dbg(&dev->pdev->dev, "sending watchdog ping\n");
+		dev_dbg(&dev->pdev->dev, "wd: sending ping\n");

 		if (mei_wd_send(dev)) {
-			dev_dbg(&dev->pdev->dev, "wd send failed.\n");
+			dev_err(&dev->pdev->dev, "wd: send failed.\n");
 			ret = -EIO;
 			goto end;
 		}

 		if (mei_flow_ctrl_reduce(dev, &dev->wd_cl)) {
-			dev_dbg(&dev->pdev->dev, "mei_flow_ctrl_reduce() failed.\n");
+			dev_err(&dev->pdev->dev,
+				"wd: mei_flow_ctrl_reduce() failed.\n");
 			ret = -EIO;
 			goto end;
 		}
@ -346,7 +344,7 @@ static const struct watchdog_info wd_info = {
 		.options = WDIOF_KEEPALIVEPING,
 };

-struct watchdog_device amt_wd_dev = {
+static struct watchdog_device amt_wd_dev = {
 		.info = &wd_info,
 		.ops = &wd_ops,
 		.timeout = AMT_WD_DEFAULT_TIMEOUT,
@ -362,10 +360,12 @@ void  mei_watchdog_register(struct mei_device *dev)
 	dev->wd_due_counter = !!dev->wd_timeout;

 	if (watchdog_register_device(&amt_wd_dev)) {
-		dev_err(&dev->pdev->dev, "unable to register watchdog device.\n");
+		dev_err(&dev->pdev->dev,
+			"wd: unable to register watchdog device.\n");
 		dev->wd_interface_reg = false;
 	} else {
-		dev_dbg(&dev->pdev->dev, "successfully register watchdog interface.\n");
+		dev_dbg(&dev->pdev->dev,
+			"wd: successfully register watchdog interface.\n");
 		dev->wd_interface_reg = true;
 	}
 }
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@ -203,37 +203,6 @@ config WANXL_BUILD_FIRMWARE

 	  You should never need this option, say N.

-config PC300
-	tristate "Cyclades-PC300 support (RS-232/V.35, X.21, T1/E1 boards)"
-	depends on HDLC && PCI && BROKEN
-	---help---
-	  This driver is broken because of struct tty_driver change.
-
-	  Driver for the Cyclades-PC300 synchronous communication boards.
-
-	  These boards provide synchronous serial interfaces to your
-	  Linux box (interfaces currently available are RS-232/V.35, X.21 and
-	  T1/E1). If you wish to support Multilink PPP, please select the
-	  option later and read the file README.mlppp provided by PC300
-	  package.
-
-	  To compile this as a module, choose M here: the module
-	  will be called pc300.
-
-	  If unsure, say N.
-
-config PC300_MLPPP
-	bool "Cyclades-PC300 MLPPP support"
-	depends on PC300 && PPP_MULTILINK && PPP_SYNC_TTY && HDLC_PPP
-	help
-	  Multilink PPP over the PC300 synchronous communication boards.
-
-comment "Cyclades-PC300 MLPPP support is disabled."
-	depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
-
-comment "Refer to the file README.mlppp, provided by PC300 package."
-	depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
-
 config PC300TOO
 	tristate "Cyclades PC300 RSV/X21 alternative support"
 	depends on HDLC && PCI
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@ -17,10 +17,6 @@ obj-$(CONFIG_HDLC_FR)		+= hdlc_fr.o
 obj-$(CONFIG_HDLC_PPP)		+= hdlc_ppp.o
 obj-$(CONFIG_HDLC_X25)		+= hdlc_x25.o

-pc300-y				:= pc300_drv.o
-pc300-$(CONFIG_PC300_MLPPP)	+= pc300_tty.o
-pc300-objs			:= $(pc300-y)
-
 obj-$(CONFIG_HOSTESS_SV11)	+= z85230.o	hostess_sv11.o
 obj-$(CONFIG_SEALEVEL_4021)	+= z85230.o	sealevel.o
 obj-$(CONFIG_COSA)		+= cosa.o
@ -35,7 +31,6 @@ obj-$(CONFIG_SDLA)		+= sdla.o
 obj-$(CONFIG_CYCLADES_SYNC)	+= cycx_drv.o cyclomx.o
 obj-$(CONFIG_LAPBETHER)		+= lapbether.o
 obj-$(CONFIG_SBNI)		+= sbni.o
-obj-$(CONFIG_PC300)		+= pc300.o
 obj-$(CONFIG_N2)		+= n2.o
 obj-$(CONFIG_C101)		+= c101.o
 obj-$(CONFIG_WANXL)		+= wanxl.o
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@ -24,8 +24,6 @@ menuconfig STAGING

 if STAGING

-source "drivers/staging/serial/Kconfig"
-
 source "drivers/staging/et131x/Kconfig"

 source "drivers/staging/slicoss/Kconfig"
@ -72,8 +70,6 @@ source "drivers/staging/vt6655/Kconfig"

 source "drivers/staging/vt6656/Kconfig"

-source "drivers/staging/vme/Kconfig"
-
 source "drivers/staging/sep/Kconfig"

 source "drivers/staging/iio/Kconfig"
@ -114,12 +110,12 @@ source "drivers/staging/cptm1217/Kconfig"

 source "drivers/staging/ste_rmi4/Kconfig"

-source "drivers/staging/mei/Kconfig"
-
 source "drivers/staging/nvec/Kconfig"

 source "drivers/staging/media/Kconfig"

+source "drivers/staging/net/Kconfig"
+
 source "drivers/staging/omapdrm/Kconfig"

 source "drivers/staging/android/Kconfig"
@ -132,4 +128,8 @@ source "drivers/staging/ozwpan/Kconfig"

 source "drivers/staging/ccg/Kconfig"

+source "drivers/staging/ipack/Kconfig"
+
+source "drivers/staging/gdm72xx/Kconfig"
+
 endif # STAGING
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@ -3,8 +3,8 @@
 # fix for build system bug...
 obj-$(CONFIG_STAGING)		+= staging.o

-obj-y				+= serial/
 obj-y				+= media/
+obj-y				+= net/
 obj-$(CONFIG_ET131X)		+= et131x/
 obj-$(CONFIG_SLICOSS)		+= slicoss/
 obj-$(CONFIG_USBIP_CORE)	+= usbip/
@ -29,6 +29,7 @@ obj-$(CONFIG_OCTEON_ETHERNET)	+= octeon/
 obj-$(CONFIG_VT6655)		+= vt6655/
 obj-$(CONFIG_VT6656)		+= vt6656/
 obj-$(CONFIG_VME_BUS)		+= vme/
+obj-$(CONFIG_IPACK_BUS)		+= ipack/
 obj-$(CONFIG_DX_SEP)            += sep/
 obj-$(CONFIG_IIO)		+= iio/
 obj-$(CONFIG_ZRAM)		+= zram/
@ -49,7 +50,6 @@ obj-$(CONFIG_FT1000)		+= ft1000/
 obj-$(CONFIG_SPEAKUP)		+= speakup/
 obj-$(CONFIG_TOUCHSCREEN_CLEARPAD_TM1217)	+= cptm1217/
 obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4)	+= ste_rmi4/
-obj-$(CONFIG_INTEL_MEI)		+= mei/
 obj-$(CONFIG_MFD_NVEC)		+= nvec/
 obj-$(CONFIG_DRM_OMAP)		+= omapdrm/
 obj-$(CONFIG_ANDROID)		+= android/
@ -57,3 +57,4 @@ obj-$(CONFIG_PHONE)		+= telephony/
 obj-$(CONFIG_RAMSTER)		+= ramster/
 obj-$(CONFIG_USB_WPAN_HCD)	+= ozwpan/
 obj-$(CONFIG_USB_G_CCG)		+= ccg/
+obj-$(CONFIG_WIMAX_GDM72XX)	+= gdm72xx/
--- a/drivers/staging/android/Kconfig
+++ b/drivers/staging/android/Kconfig
@ -25,17 +25,9 @@ config ANDROID_LOGGER
 	tristate "Android log driver"
 	default n

-config ANDROID_PERSISTENT_RAM
-	bool
-	depends on HAVE_MEMBLOCK
-	select REED_SOLOMON
-	select REED_SOLOMON_ENC8
-	select REED_SOLOMON_DEC8
-
 config ANDROID_RAM_CONSOLE
 	bool "Android RAM buffer console"
-	depends on !S390 && !UML && HAVE_MEMBLOCK
-	select ANDROID_PERSISTENT_RAM
+	depends on !S390 && !UML && HAVE_MEMBLOCK && PSTORE_RAM=y
 	default n

 config ANDROID_TIMED_OUTPUT
@ -53,31 +45,15 @@ config ANDROID_LOW_MEMORY_KILLER
 	---help---
 	  Register processes to be killed when memory is low

-config ANDROID_INTF_ALARM
+config ANDROID_INTF_ALARM_DEV
 	bool "Android alarm driver"
 	depends on RTC_CLASS
 	default n
 	help
 	  Provides non-wakeup and rtc backed wakeup alarms based on rtc or
 	  elapsed realtime, and a non-wakeup alarm on the monotonic clock.
-	  Also provides an interface to set the wall time which must be used
-	  for elapsed realtime to work.
+	  Also exports the alarm interface to user-space.

-config ANDROID_INTF_ALARM_DEV
-	bool "Android alarm device"
-	depends on ANDROID_INTF_ALARM
-	default y
-	help
-	  Exports the alarm interface to user-space.
-
-config ANDROID_ALARM_OLDDRV_COMPAT
-	bool "Android Alarm compatability with old drivers"
-	depends on ANDROID_INTF_ALARM
-	default n
-	help
-	  Provides preprocessor alias to aid compatability with
-	  older out-of-tree drivers that use the Android Alarm
-	  in-kernel API. This will be removed eventually.
 endif # if ANDROID

 endmenu
--- a/drivers/staging/android/Makefile
+++ b/drivers/staging/android/Makefile
@ -1,10 +1,8 @@
 obj-$(CONFIG_ANDROID_BINDER_IPC)	+= binder.o
 obj-$(CONFIG_ASHMEM)			+= ashmem.o
 obj-$(CONFIG_ANDROID_LOGGER)		+= logger.o
-obj-$(CONFIG_ANDROID_PERSISTENT_RAM)	+= persistent_ram.o
 obj-$(CONFIG_ANDROID_RAM_CONSOLE)	+= ram_console.o
 obj-$(CONFIG_ANDROID_TIMED_OUTPUT)	+= timed_output.o
 obj-$(CONFIG_ANDROID_TIMED_GPIO)	+= timed_gpio.o
 obj-$(CONFIG_ANDROID_LOW_MEMORY_KILLER)	+= lowmemorykiller.o
-obj-$(CONFIG_ANDROID_INTF_ALARM)	+= alarm.o
 obj-$(CONFIG_ANDROID_INTF_ALARM_DEV)	+= alarm-dev.o
--- a/drivers/staging/android/alarm-dev.c
+++ b/drivers/staging/android/alarm-dev.c
@ -22,19 +22,9 @@
 #include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/uaccess.h>
+#include <linux/alarmtimer.h>
 #include "android_alarm.h"

-/* XXX - Hack out wakelocks, while they are out of tree */
-struct wake_lock {
-	int i;
-};
-#define wake_lock(x)
-#define wake_lock_timeout(x, y)
-#define wake_unlock(x)
-#define WAKE_LOCK_SUSPEND 0
-#define wake_lock_init(x, y, z) ((x)->i = 1)
-#define wake_lock_destroy(x)
-
 #define ANDROID_ALARM_PRINT_INFO (1U << 0)
 #define ANDROID_ALARM_PRINT_IO (1U << 1)
 #define ANDROID_ALARM_PRINT_INT (1U << 2)
@ -54,19 +44,65 @@ module_param_named(debug_mask, debug_mask, int, S_IRUGO | S_IWUSR | S_IWGRP);
 	ANDROID_ALARM_RTC_WAKEUP_MASK | \
 	ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP_MASK)

-/* support old usespace code */
+/* support old userspace code */
 #define ANDROID_ALARM_SET_OLD               _IOW('a', 2, time_t) /* set alarm */
 #define ANDROID_ALARM_SET_AND_WAIT_OLD      _IOW('a', 3, time_t)

 static int alarm_opened;
 static DEFINE_SPINLOCK(alarm_slock);
-static struct wake_lock alarm_wake_lock;
+static struct wakeup_source alarm_wake_lock;
 static DECLARE_WAIT_QUEUE_HEAD(alarm_wait_queue);
 static uint32_t alarm_pending;
 static uint32_t alarm_enabled;
 static uint32_t wait_pending;

-static struct android_alarm alarms[ANDROID_ALARM_TYPE_COUNT];
+struct devalarm {
+	union {
+		struct hrtimer hrt;
+		struct alarm alrm;
+	} u;
+	enum android_alarm_type type;
+};
+
+static struct devalarm alarms[ANDROID_ALARM_TYPE_COUNT];
+
+
+static int is_wakeup(enum android_alarm_type type)
+{
+	if (type == ANDROID_ALARM_RTC_WAKEUP ||
+			type == ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP)
+		return 1;
+	return 0;
+}
+
+
+static void devalarm_start(struct devalarm *alrm, ktime_t exp)
+{
+	if (is_wakeup(alrm->type))
+		alarm_start(&alrm->u.alrm, exp);
+	else
+		hrtimer_start(&alrm->u.hrt, exp, HRTIMER_MODE_ABS);
+}
+
+
+static int devalarm_try_to_cancel(struct devalarm *alrm)
+{
+	int ret;
+	if (is_wakeup(alrm->type))
+		ret = alarm_try_to_cancel(&alrm->u.alrm);
+	else
+		ret = hrtimer_try_to_cancel(&alrm->u.hrt);
+	return ret;
+}
+
+static void devalarm_cancel(struct devalarm *alrm)
+{
+	if (is_wakeup(alrm->type))
+		alarm_cancel(&alrm->u.alrm);
+	else
+		hrtimer_cancel(&alrm->u.hrt);
+}
+

 static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
@ -75,6 +111,8 @@ static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	struct timespec new_alarm_time;
 	struct timespec new_rtc_time;
 	struct timespec tmp_time;
+	struct rtc_time new_rtc_tm;
+	struct rtc_device *rtc_dev;
 	enum android_alarm_type alarm_type = ANDROID_ALARM_IOCTL_TO_TYPE(cmd);
 	uint32_t alarm_type_mask = 1U << alarm_type;

@ -101,11 +139,11 @@ static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case ANDROID_ALARM_CLEAR(0):
 		spin_lock_irqsave(&alarm_slock, flags);
 		pr_alarm(IO, "alarm %d clear\n", alarm_type);
-		android_alarm_try_to_cancel(&alarms[alarm_type]);
+		devalarm_try_to_cancel(&alarms[alarm_type]);
 		if (alarm_pending) {
 			alarm_pending &= ~alarm_type_mask;
 			if (!alarm_pending && !wait_pending)
-				wake_unlock(&alarm_wake_lock);
+				__pm_relax(&alarm_wake_lock);
 		}
 		alarm_enabled &= ~alarm_type_mask;
 		spin_unlock_irqrestore(&alarm_slock, flags);
@ -132,8 +170,7 @@ from_old_alarm_set:
 		pr_alarm(IO, "alarm %d set %ld.%09ld\n", alarm_type,
 			new_alarm_time.tv_sec, new_alarm_time.tv_nsec);
 		alarm_enabled |= alarm_type_mask;
-		android_alarm_start_range(&alarms[alarm_type],
-			timespec_to_ktime(new_alarm_time),
+		devalarm_start(&alarms[alarm_type],
 			timespec_to_ktime(new_alarm_time));
 		spin_unlock_irqrestore(&alarm_slock, flags);
 		if (ANDROID_ALARM_BASE_CMD(cmd) != ANDROID_ALARM_SET_AND_WAIT(0)
@ -144,7 +181,7 @@ from_old_alarm_set:
 		spin_lock_irqsave(&alarm_slock, flags);
 		pr_alarm(IO, "alarm wait\n");
 		if (!alarm_pending && wait_pending) {
-			wake_unlock(&alarm_wake_lock);
+			__pm_relax(&alarm_wake_lock);
 			wait_pending = 0;
 		}
 		spin_unlock_irqrestore(&alarm_slock, flags);
@ -163,7 +200,13 @@ from_old_alarm_set:
 			rv = -EFAULT;
 			goto err1;
 		}
-		rv = android_alarm_set_rtc(new_rtc_time);
+		rtc_time_to_tm(new_rtc_time.tv_sec, &new_rtc_tm);
+		rtc_dev = alarmtimer_get_rtcdev();
+		rv = do_settimeofday(&new_rtc_time);
+		if (rv < 0)
+			goto err1;
+		if (rtc_dev)
+			rv = rtc_set_time(rtc_dev, &new_rtc_tm);
 		spin_lock_irqsave(&alarm_slock, flags);
 		alarm_pending |= ANDROID_ALARM_TIME_CHANGE_MASK;
 		wake_up(&alarm_wait_queue);
@ -179,8 +222,7 @@ from_old_alarm_set:
 			break;
 		case ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP:
 		case ANDROID_ALARM_ELAPSED_REALTIME:
-			tmp_time =
-				ktime_to_timespec(alarm_get_elapsed_realtime());
+			get_monotonic_boottime(&tmp_time);
 			break;
 		case ANDROID_ALARM_TYPE_COUNT:
 		case ANDROID_ALARM_SYSTEMTIME:
@ -224,14 +266,14 @@ static int alarm_release(struct inode *inode, struct file *file)
 				alarm_enabled &= ~alarm_type_mask;
 			}
 			spin_unlock_irqrestore(&alarm_slock, flags);
-			android_alarm_cancel(&alarms[i]);
+			devalarm_cancel(&alarms[i]);
 			spin_lock_irqsave(&alarm_slock, flags);
 		}
 		if (alarm_pending | wait_pending) {
 			if (alarm_pending)
 				pr_alarm(INFO, "alarm_release: clear "
 					"pending alarms %x\n", alarm_pending);
-			wake_unlock(&alarm_wake_lock);
+			__pm_relax(&alarm_wake_lock);
 			wait_pending = 0;
 			alarm_pending = 0;
 		}
@ -241,15 +283,15 @@ static int alarm_release(struct inode *inode, struct file *file)
 	return 0;
 }

-static void alarm_triggered(struct android_alarm *alarm)
+static void devalarm_triggered(struct devalarm *alarm)
 {
 	unsigned long flags;
 	uint32_t alarm_type_mask = 1U << alarm->type;

-	pr_alarm(INT, "alarm_triggered type %d\n", alarm->type);
+	pr_alarm(INT, "devalarm_triggered type %d\n", alarm->type);
 	spin_lock_irqsave(&alarm_slock, flags);
 	if (alarm_enabled & alarm_type_mask) {
-		wake_lock_timeout(&alarm_wake_lock, 5 * HZ);
+		__pm_wakeup_event(&alarm_wake_lock, 5000); /* 5secs */
 		alarm_enabled &= ~alarm_type_mask;
 		alarm_pending |= alarm_type_mask;
 		wake_up(&alarm_wait_queue);
@ -257,6 +299,25 @@ static void alarm_triggered(struct android_alarm *alarm)
 	spin_unlock_irqrestore(&alarm_slock, flags);
 }

+
+static enum hrtimer_restart devalarm_hrthandler(struct hrtimer *hrt)
+{
+	struct devalarm *devalrm = container_of(hrt, struct devalarm, u.hrt);
+
+	devalarm_triggered(devalrm);
+	return HRTIMER_NORESTART;
+}
+
+static enum alarmtimer_restart devalarm_alarmhandler(struct alarm *alrm,
+							ktime_t now)
+{
+	struct devalarm *devalrm = container_of(alrm, struct devalarm, u.alrm);
+
+	devalarm_triggered(devalrm);
+	return ALARMTIMER_NORESTART;
+}
+
+
 static const struct file_operations alarm_fops = {
 	.owner = THIS_MODULE,
 	.unlocked_ioctl = alarm_ioctl,
@ -279,17 +340,31 @@ static int __init alarm_dev_init(void)
 	if (err)
 		return err;

-	for (i = 0; i < ANDROID_ALARM_TYPE_COUNT; i++)
-		android_alarm_init(&alarms[i], i, alarm_triggered);
-	wake_lock_init(&alarm_wake_lock, WAKE_LOCK_SUSPEND, "alarm");
+	alarm_init(&alarms[ANDROID_ALARM_RTC_WAKEUP].u.alrm,
+			ALARM_REALTIME, devalarm_alarmhandler);
+	hrtimer_init(&alarms[ANDROID_ALARM_RTC].u.hrt,
+			CLOCK_REALTIME, HRTIMER_MODE_ABS);
+	alarm_init(&alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP].u.alrm,
+			ALARM_BOOTTIME, devalarm_alarmhandler);
+	hrtimer_init(&alarms[ANDROID_ALARM_ELAPSED_REALTIME].u.hrt,
+			CLOCK_BOOTTIME, HRTIMER_MODE_ABS);
+	hrtimer_init(&alarms[ANDROID_ALARM_SYSTEMTIME].u.hrt,
+			CLOCK_MONOTONIC, HRTIMER_MODE_ABS);

+	for (i = 0; i < ANDROID_ALARM_TYPE_COUNT; i++) {
+		alarms[i].type = i;
+		if (!is_wakeup(i))
+			alarms[i].u.hrt.function = devalarm_hrthandler;
+	}
+
+	wakeup_source_init(&alarm_wake_lock, "alarm");
 	return 0;
 }

 static void  __exit alarm_dev_exit(void)
 {
 	misc_deregister(&alarm_device);
-	wake_lock_destroy(&alarm_wake_lock);
+	wakeup_source_trash(&alarm_wake_lock);
 }

 module_init(alarm_dev_init);
--- a/drivers/staging/android/alarm.c
+++ b/drivers/staging/android/alarm.c
@ -1,601 +0,0 @@
-/* drivers/rtc/alarm.c
- *
- * Copyright (C) 2007-2009 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/time.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/miscdevice.h>
-#include <linux/platform_device.h>
-#include <linux/rtc.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include "android_alarm.h"
-
-/* XXX - Hack out wakelocks, while they are out of tree */
-struct wake_lock {
-	int i;
-};
-#define wake_lock(x)
-#define wake_lock_timeout(x, y)
-#define wake_unlock(x)
-#define WAKE_LOCK_SUSPEND 0
-#define wake_lock_init(x, y, z) ((x)->i = 1)
-#define wake_lock_destroy(x)
-
-#define ANDROID_ALARM_PRINT_ERROR (1U << 0)
-#define ANDROID_ALARM_PRINT_INIT_STATUS (1U << 1)
-#define ANDROID_ALARM_PRINT_TSET (1U << 2)
-#define ANDROID_ALARM_PRINT_CALL (1U << 3)
-#define ANDROID_ALARM_PRINT_SUSPEND (1U << 4)
-#define ANDROID_ALARM_PRINT_INT (1U << 5)
-#define ANDROID_ALARM_PRINT_FLOW (1U << 6)
-
-static int debug_mask = ANDROID_ALARM_PRINT_ERROR | \
-			ANDROID_ALARM_PRINT_INIT_STATUS;
-module_param_named(debug_mask, debug_mask, int, S_IRUGO | S_IWUSR | S_IWGRP);
-
-#define pr_alarm(debug_level_mask, args...) \
-	do { \
-		if (debug_mask & ANDROID_ALARM_PRINT_##debug_level_mask) { \
-			pr_info(args); \
-		} \
-	} while (0)
-
-#define ANDROID_ALARM_WAKEUP_MASK ( \
-	ANDROID_ALARM_RTC_WAKEUP_MASK | \
-	ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP_MASK)
-
-/* support old usespace code */
-#define ANDROID_ALARM_SET_OLD               _IOW('a', 2, time_t) /* set alarm */
-#define ANDROID_ALARM_SET_AND_WAIT_OLD      _IOW('a', 3, time_t)
-
-struct alarm_queue {
-	struct rb_root alarms;
-	struct rb_node *first;
-	struct hrtimer timer;
-	ktime_t delta;
-	bool stopped;
-	ktime_t stopped_time;
-};
-
-static struct rtc_device *alarm_rtc_dev;
-static DEFINE_SPINLOCK(alarm_slock);
-static DEFINE_MUTEX(alarm_setrtc_mutex);
-static struct wake_lock alarm_rtc_wake_lock;
-static struct platform_device *alarm_platform_dev;
-struct alarm_queue alarms[ANDROID_ALARM_TYPE_COUNT];
-static bool suspended;
-
-static void update_timer_locked(struct alarm_queue *base, bool head_removed)
-{
-	struct android_alarm *alarm;
-	bool is_wakeup = base == &alarms[ANDROID_ALARM_RTC_WAKEUP] ||
-			base == &alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP];
-
-	if (base->stopped) {
-		pr_alarm(FLOW, "changed alarm while setting the wall time\n");
-		return;
-	}
-
-	if (is_wakeup && !suspended && head_removed)
-		wake_unlock(&alarm_rtc_wake_lock);
-
-	if (!base->first)
-		return;
-
-	alarm = container_of(base->first, struct android_alarm, node);
-
-	pr_alarm(FLOW, "selected alarm, type %d, func %pF at %lld\n",
-		alarm->type, alarm->function, ktime_to_ns(alarm->expires));
-
-	if (is_wakeup && suspended) {
-		pr_alarm(FLOW, "changed alarm while suspened\n");
-		wake_lock_timeout(&alarm_rtc_wake_lock, 1 * HZ);
-		return;
-	}
-
-	hrtimer_try_to_cancel(&base->timer);
-	base->timer.node.expires = ktime_add(base->delta, alarm->expires);
-	base->timer._softexpires = ktime_add(base->delta, alarm->softexpires);
-	hrtimer_start_expires(&base->timer, HRTIMER_MODE_ABS);
-}
-
-static void alarm_enqueue_locked(struct android_alarm *alarm)
-{
-	struct alarm_queue *base = &alarms[alarm->type];
-	struct rb_node **link = &base->alarms.rb_node;
-	struct rb_node *parent = NULL;
-	struct android_alarm *entry;
-	int leftmost = 1;
-	bool was_first = false;
-
-	pr_alarm(FLOW, "added alarm, type %d, func %pF at %lld\n",
-		alarm->type, alarm->function, ktime_to_ns(alarm->expires));
-
-	if (base->first == &alarm->node) {
-		base->first = rb_next(&alarm->node);
-		was_first = true;
-	}
-	if (!RB_EMPTY_NODE(&alarm->node)) {
-		rb_erase(&alarm->node, &base->alarms);
-		RB_CLEAR_NODE(&alarm->node);
-	}
-
-	while (*link) {
-		parent = *link;
-		entry = rb_entry(parent, struct android_alarm, node);
-		/*
-		* We dont care about collisions. Nodes with
-		* the same expiry time stay together.
-		*/
-		if (alarm->expires.tv64 < entry->expires.tv64) {
-			link = &(*link)->rb_left;
-		} else {
-			link = &(*link)->rb_right;
-			leftmost = 0;
-		}
-	}
-	if (leftmost)
-		base->first = &alarm->node;
-	if (leftmost || was_first)
-		update_timer_locked(base, was_first);
-
-	rb_link_node(&alarm->node, parent, link);
-	rb_insert_color(&alarm->node, &base->alarms);
-}
-
-/**
- * android_alarm_init - initialize an alarm
- * @alarm:	the alarm to be initialized
- * @type:	the alarm type to be used
- * @function:	alarm callback function
- */
-void android_alarm_init(struct android_alarm *alarm,
-	enum android_alarm_type type, void (*function)(struct android_alarm *))
-{
-	RB_CLEAR_NODE(&alarm->node);
-	alarm->type = type;
-	alarm->function = function;
-
-	pr_alarm(FLOW, "created alarm, type %d, func %pF\n", type, function);
-}
-
-
-/**
- * android_alarm_start_range - (re)start an alarm
- * @alarm:	the alarm to be added
- * @start:	earliest expiry time
- * @end:	expiry time
- */
-void android_alarm_start_range(struct android_alarm *alarm, ktime_t start,
-								ktime_t end)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&alarm_slock, flags);
-	alarm->softexpires = start;
-	alarm->expires = end;
-	alarm_enqueue_locked(alarm);
-	spin_unlock_irqrestore(&alarm_slock, flags);
-}
-
-/**
- * android_alarm_try_to_cancel - try to deactivate an alarm
- * @alarm:	alarm to stop
- *
- * Returns:
- *  0 when the alarm was not active
- *  1 when the alarm was active
- * -1 when the alarm may currently be excuting the callback function and
- *    cannot be stopped (it may also be inactive)
- */
-int android_alarm_try_to_cancel(struct android_alarm *alarm)
-{
-	struct alarm_queue *base = &alarms[alarm->type];
-	unsigned long flags;
-	bool first = false;
-	int ret = 0;
-
-	spin_lock_irqsave(&alarm_slock, flags);
-	if (!RB_EMPTY_NODE(&alarm->node)) {
-		pr_alarm(FLOW, "canceled alarm, type %d, func %pF at %lld\n",
-			alarm->type, alarm->function,
-			ktime_to_ns(alarm->expires));
-		ret = 1;
-		if (base->first == &alarm->node) {
-			base->first = rb_next(&alarm->node);
-			first = true;
-		}
-		rb_erase(&alarm->node, &base->alarms);
-		RB_CLEAR_NODE(&alarm->node);
-		if (first)
-			update_timer_locked(base, true);
-	} else
-		pr_alarm(FLOW, "tried to cancel alarm, type %d, func %pF\n",
-			alarm->type, alarm->function);
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	if (!ret && hrtimer_callback_running(&base->timer))
-		ret = -1;
-	return ret;
-}
-
-/**
- * android_alarm_cancel - cancel an alarm and wait for the handler to finish.
- * @alarm:	the alarm to be cancelled
- *
- * Returns:
- *  0 when the alarm was not active
- *  1 when the alarm was active
- */
-int android_alarm_cancel(struct android_alarm *alarm)
-{
-	for (;;) {
-		int ret = android_alarm_try_to_cancel(alarm);
-		if (ret >= 0)
-			return ret;
-		cpu_relax();
-	}
-}
-
-/**
- * alarm_set_rtc - set the kernel and rtc walltime
- * @new_time:	timespec value containing the new time
- */
-int android_alarm_set_rtc(struct timespec new_time)
-{
-	int i;
-	int ret;
-	unsigned long flags;
-	struct rtc_time rtc_new_rtc_time;
-	struct timespec tmp_time;
-
-	rtc_time_to_tm(new_time.tv_sec, &rtc_new_rtc_time);
-
-	pr_alarm(TSET, "set rtc %ld %ld - rtc %02d:%02d:%02d %02d/%02d/%04d\n",
-		new_time.tv_sec, new_time.tv_nsec,
-		rtc_new_rtc_time.tm_hour, rtc_new_rtc_time.tm_min,
-		rtc_new_rtc_time.tm_sec, rtc_new_rtc_time.tm_mon + 1,
-		rtc_new_rtc_time.tm_mday,
-		rtc_new_rtc_time.tm_year + 1900);
-
-	mutex_lock(&alarm_setrtc_mutex);
-	spin_lock_irqsave(&alarm_slock, flags);
-	wake_lock(&alarm_rtc_wake_lock);
-	getnstimeofday(&tmp_time);
-	for (i = 0; i < ANDROID_ALARM_SYSTEMTIME; i++) {
-		hrtimer_try_to_cancel(&alarms[i].timer);
-		alarms[i].stopped = true;
-		alarms[i].stopped_time = timespec_to_ktime(tmp_time);
-	}
-	alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP].delta =
-		alarms[ANDROID_ALARM_ELAPSED_REALTIME].delta =
-		ktime_sub(alarms[ANDROID_ALARM_ELAPSED_REALTIME].delta,
-			timespec_to_ktime(timespec_sub(tmp_time, new_time)));
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	ret = do_settimeofday(&new_time);
-	spin_lock_irqsave(&alarm_slock, flags);
-	for (i = 0; i < ANDROID_ALARM_SYSTEMTIME; i++) {
-		alarms[i].stopped = false;
-		update_timer_locked(&alarms[i], false);
-	}
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	if (ret < 0) {
-		pr_alarm(ERROR, "alarm_set_rtc: Failed to set time\n");
-		goto err;
-	}
-	if (!alarm_rtc_dev) {
-		pr_alarm(ERROR,
-			"alarm_set_rtc: no RTC, time will be lost on reboot\n");
-		goto err;
-	}
-	ret = rtc_set_time(alarm_rtc_dev, &rtc_new_rtc_time);
-	if (ret < 0)
-		pr_alarm(ERROR, "alarm_set_rtc: "
-			"Failed to set RTC, time will be lost on reboot\n");
-err:
-	wake_unlock(&alarm_rtc_wake_lock);
-	mutex_unlock(&alarm_setrtc_mutex);
-	return ret;
-}
-
-/**
- * alarm_get_elapsed_realtime - get the elapsed real time in ktime_t format
- *
- * returns the time in ktime_t format
- */
-ktime_t alarm_get_elapsed_realtime(void)
-{
-	ktime_t now;
-	unsigned long flags;
-	struct alarm_queue *base = &alarms[ANDROID_ALARM_ELAPSED_REALTIME];
-
-	spin_lock_irqsave(&alarm_slock, flags);
-	now = base->stopped ? base->stopped_time : ktime_get_real();
-	now = ktime_sub(now, base->delta);
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	return now;
-}
-
-static enum hrtimer_restart alarm_timer_triggered(struct hrtimer *timer)
-{
-	struct alarm_queue *base;
-	struct android_alarm *alarm;
-	unsigned long flags;
-	ktime_t now;
-
-	spin_lock_irqsave(&alarm_slock, flags);
-
-	base = container_of(timer, struct alarm_queue, timer);
-	now = base->stopped ? base->stopped_time : hrtimer_cb_get_time(timer);
-	now = ktime_sub(now, base->delta);
-
-	pr_alarm(INT, "alarm_timer_triggered type %ld at %lld\n",
-		base - alarms, ktime_to_ns(now));
-
-	while (base->first) {
-		alarm = container_of(base->first, struct android_alarm, node);
-		if (alarm->softexpires.tv64 > now.tv64) {
-			pr_alarm(FLOW, "don't call alarm, %pF, %lld (s %lld)\n",
-				alarm->function, ktime_to_ns(alarm->expires),
-				ktime_to_ns(alarm->softexpires));
-			break;
-		}
-		base->first = rb_next(&alarm->node);
-		rb_erase(&alarm->node, &base->alarms);
-		RB_CLEAR_NODE(&alarm->node);
-		pr_alarm(CALL, "call alarm, type %d, func %pF, %lld (s %lld)\n",
-			alarm->type, alarm->function,
-			ktime_to_ns(alarm->expires),
-			ktime_to_ns(alarm->softexpires));
-		spin_unlock_irqrestore(&alarm_slock, flags);
-		alarm->function(alarm);
-		spin_lock_irqsave(&alarm_slock, flags);
-	}
-	if (!base->first)
-		pr_alarm(FLOW, "no more alarms of type %ld\n", base - alarms);
-	update_timer_locked(base, true);
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	return HRTIMER_NORESTART;
-}
-
-static void alarm_triggered_func(void *p)
-{
-	struct rtc_device *rtc = alarm_rtc_dev;
-	if (!(rtc->irq_data & RTC_AF))
-		return;
-	pr_alarm(INT, "rtc alarm triggered\n");
-	wake_lock_timeout(&alarm_rtc_wake_lock, 1 * HZ);
-}
-
-static int alarm_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	int                 err = 0;
-	unsigned long       flags;
-	struct rtc_wkalrm   rtc_alarm;
-	struct rtc_time     rtc_current_rtc_time;
-	unsigned long       rtc_current_time;
-	unsigned long       rtc_alarm_time;
-	struct timespec     rtc_delta;
-	struct timespec     wall_time;
-	struct alarm_queue *wakeup_queue = NULL;
-	struct alarm_queue *tmp_queue = NULL;
-
-	pr_alarm(SUSPEND, "alarm_suspend(%p, %d)\n", pdev, state.event);
-
-	spin_lock_irqsave(&alarm_slock, flags);
-	suspended = true;
-	spin_unlock_irqrestore(&alarm_slock, flags);
-
-	hrtimer_cancel(&alarms[ANDROID_ALARM_RTC_WAKEUP].timer);
-	hrtimer_cancel(&alarms[
-			ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP].timer);
-
-	tmp_queue = &alarms[ANDROID_ALARM_RTC_WAKEUP];
-	if (tmp_queue->first)
-		wakeup_queue = tmp_queue;
-	tmp_queue = &alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP];
-	if (tmp_queue->first && (!wakeup_queue ||
-				hrtimer_get_expires(&tmp_queue->timer).tv64 <
-				hrtimer_get_expires(&wakeup_queue->timer).tv64))
-		wakeup_queue = tmp_queue;
-	if (wakeup_queue) {
-		rtc_read_time(alarm_rtc_dev, &rtc_current_rtc_time);
-		getnstimeofday(&wall_time);
-		rtc_tm_to_time(&rtc_current_rtc_time, &rtc_current_time);
-		set_normalized_timespec(&rtc_delta,
-					wall_time.tv_sec - rtc_current_time,
-					wall_time.tv_nsec);
-
-		rtc_alarm_time = timespec_sub(ktime_to_timespec(
-			hrtimer_get_expires(&wakeup_queue->timer)),
-			rtc_delta).tv_sec;
-
-		rtc_time_to_tm(rtc_alarm_time, &rtc_alarm.time);
-		rtc_alarm.enabled = 1;
-		rtc_set_alarm(alarm_rtc_dev, &rtc_alarm);
-		rtc_read_time(alarm_rtc_dev, &rtc_current_rtc_time);
-		rtc_tm_to_time(&rtc_current_rtc_time, &rtc_current_time);
-		pr_alarm(SUSPEND,
-			"rtc alarm set at %ld, now %ld, rtc delta %ld.%09ld\n",
-			rtc_alarm_time, rtc_current_time,
-			rtc_delta.tv_sec, rtc_delta.tv_nsec);
-		if (rtc_current_time + 1 >= rtc_alarm_time) {
-			pr_alarm(SUSPEND, "alarm about to go off\n");
-			memset(&rtc_alarm, 0, sizeof(rtc_alarm));
-			rtc_alarm.enabled = 0;
-			rtc_set_alarm(alarm_rtc_dev, &rtc_alarm);
-
-			spin_lock_irqsave(&alarm_slock, flags);
-			suspended = false;
-			wake_lock_timeout(&alarm_rtc_wake_lock, 2 * HZ);
-			update_timer_locked(&alarms[ANDROID_ALARM_RTC_WAKEUP],
-									false);
-			update_timer_locked(&alarms[
-				ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP], false);
-			err = -EBUSY;
-			spin_unlock_irqrestore(&alarm_slock, flags);
-		}
-	}
-	return err;
-}
-
-static int alarm_resume(struct platform_device *pdev)
-{
-	struct rtc_wkalrm alarm;
-	unsigned long       flags;
-
-	pr_alarm(SUSPEND, "alarm_resume(%p)\n", pdev);
-
-	memset(&alarm, 0, sizeof(alarm));
-	alarm.enabled = 0;
-	rtc_set_alarm(alarm_rtc_dev, &alarm);
-
-	spin_lock_irqsave(&alarm_slock, flags);
-	suspended = false;
-	update_timer_locked(&alarms[ANDROID_ALARM_RTC_WAKEUP], false);
-	update_timer_locked(&alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP],
-									false);
-	spin_unlock_irqrestore(&alarm_slock, flags);
-
-	return 0;
-}
-
-static struct rtc_task alarm_rtc_task = {
-	.func = alarm_triggered_func
-};
-
-static int rtc_alarm_add_device(struct device *dev,
-				struct class_interface *class_intf)
-{
-	int err;
-	struct rtc_device *rtc = to_rtc_device(dev);
-
-	mutex_lock(&alarm_setrtc_mutex);
-
-	if (alarm_rtc_dev) {
-		err = -EBUSY;
-		goto err1;
-	}
-
-	alarm_platform_dev =
-		platform_device_register_simple("alarm", -1, NULL, 0);
-	if (IS_ERR(alarm_platform_dev)) {
-		err = PTR_ERR(alarm_platform_dev);
-		goto err2;
-	}
-	err = rtc_irq_register(rtc, &alarm_rtc_task);
-	if (err)
-		goto err3;
-	alarm_rtc_dev = rtc;
-	pr_alarm(INIT_STATUS, "using rtc device, %s, for alarms", rtc->name);
-	mutex_unlock(&alarm_setrtc_mutex);
-
-	return 0;
-
-err3:
-	platform_device_unregister(alarm_platform_dev);
-err2:
-err1:
-	mutex_unlock(&alarm_setrtc_mutex);
-	return err;
-}
-
-static void rtc_alarm_remove_device(struct device *dev,
-				    struct class_interface *class_intf)
-{
-	if (dev == &alarm_rtc_dev->dev) {
-		pr_alarm(INIT_STATUS, "lost rtc device for alarms");
-		rtc_irq_unregister(alarm_rtc_dev, &alarm_rtc_task);
-		platform_device_unregister(alarm_platform_dev);
-		alarm_rtc_dev = NULL;
-	}
-}
-
-static struct class_interface rtc_alarm_interface = {
-	.add_dev = &rtc_alarm_add_device,
-	.remove_dev = &rtc_alarm_remove_device,
-};
-
-static struct platform_driver alarm_driver = {
-	.suspend = alarm_suspend,
-	.resume = alarm_resume,
-	.driver = {
-		.name = "alarm"
-	}
-};
-
-static int __init alarm_late_init(void)
-{
-	unsigned long   flags;
-	struct timespec tmp_time, system_time;
-
-	/* this needs to run after the rtc is read at boot */
-	spin_lock_irqsave(&alarm_slock, flags);
-	/* We read the current rtc and system time so we can later calulate
-	 * elasped realtime to be (boot_systemtime + rtc - boot_rtc) ==
-	 * (rtc - (boot_rtc - boot_systemtime))
-	 */
-	getnstimeofday(&tmp_time);
-	ktime_get_ts(&system_time);
-	alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP].delta =
-		alarms[ANDROID_ALARM_ELAPSED_REALTIME].delta =
-			timespec_to_ktime(timespec_sub(tmp_time, system_time));
-
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	return 0;
-}
-
-static int __init alarm_driver_init(void)
-{
-	int err;
-	int i;
-
-	for (i = 0; i < ANDROID_ALARM_SYSTEMTIME; i++) {
-		hrtimer_init(&alarms[i].timer,
-				CLOCK_REALTIME, HRTIMER_MODE_ABS);
-		alarms[i].timer.function = alarm_timer_triggered;
-	}
-	hrtimer_init(&alarms[ANDROID_ALARM_SYSTEMTIME].timer,
-		     CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
-	alarms[ANDROID_ALARM_SYSTEMTIME].timer.function = alarm_timer_triggered;
-	err = platform_driver_register(&alarm_driver);
-	if (err < 0)
-		goto err1;
-	wake_lock_init(&alarm_rtc_wake_lock, WAKE_LOCK_SUSPEND, "alarm_rtc");
-	rtc_alarm_interface.class = rtc_class;
-	err = class_interface_register(&rtc_alarm_interface);
-	if (err < 0)
-		goto err2;
-
-	return 0;
-
-err2:
-	wake_lock_destroy(&alarm_rtc_wake_lock);
-	platform_driver_unregister(&alarm_driver);
-err1:
-	return err;
-}
-
-static void  __exit alarm_exit(void)
-{
-	class_interface_unregister(&rtc_alarm_interface);
-	wake_lock_destroy(&alarm_rtc_wake_lock);
-	platform_driver_unregister(&alarm_driver);
-}
-
-late_initcall(alarm_late_init);
-module_init(alarm_driver_init);
-module_exit(alarm_exit);
-
--- a/drivers/staging/android/android_alarm.h
+++ b/drivers/staging/android/android_alarm.h
@ -33,65 +33,6 @@ enum android_alarm_type {
 	/* ANDROID_ALARM_TIME_CHANGE = 16 */
 };

-#ifdef __KERNEL__
-
-#include <linux/ktime.h>
-#include <linux/rbtree.h>
-
-/*
- * The alarm interface is similar to the hrtimer interface but adds support
- * for wakeup from suspend. It also adds an elapsed realtime clock that can
- * be used for periodic timers that need to keep runing while the system is
- * suspended and not be disrupted when the wall time is set.
- */
-
-/**
- * struct alarm - the basic alarm structure
- * @node:	red black tree node for time ordered insertion
- * @type:	alarm type. rtc/elapsed-realtime/systemtime, wakeup/non-wakeup.
- * @softexpires: the absolute earliest expiry time of the alarm.
- * @expires:	the absolute expiry time.
- * @function:	alarm expiry callback function
- *
- * The alarm structure must be initialized by alarm_init()
- *
- */
-
-struct android_alarm {
-	struct rb_node		node;
-	enum android_alarm_type type;
-	ktime_t			softexpires;
-	ktime_t			expires;
-	void			(*function)(struct android_alarm *);
-};
-
-void android_alarm_init(struct android_alarm *alarm,
-	enum android_alarm_type type, void (*function)(struct android_alarm *));
-void android_alarm_start_range(struct android_alarm *alarm, ktime_t start,
-								ktime_t end);
-int android_alarm_try_to_cancel(struct android_alarm *alarm);
-int android_alarm_cancel(struct android_alarm *alarm);
-ktime_t alarm_get_elapsed_realtime(void);
-
-/* set rtc while preserving elapsed realtime */
-int android_alarm_set_rtc(const struct timespec ts);
-
-#ifdef CONFIG_ANDROID_ALARM_OLDDRV_COMPAT
-/*
- * Some older drivers depend on the old API,
- * so provide compatability macros for now.
- */
-#define alarm android_alarm
-#define alarm_init(x, y, z) android_alarm_init(x, y, z)
-#define alarm_start_range(x, y, z) android_alarm_start_range(x, y, z)
-#define alarm_try_to_cancel(x) android_alarm_try_to_cancel(x)
-#define alarm_cancel(x) android_alarm_cancel(x)
-#define alarm_set_rtc(x) android_alarm_set_rtc(x)
-#endif
-
-
-#endif
-
 enum android_alarm_return_flags {
 	ANDROID_ALARM_RTC_WAKEUP_MASK = 1U << ANDROID_ALARM_RTC_WAKEUP,
 	ANDROID_ALARM_RTC_MASK = 1U << ANDROID_ALARM_RTC,
--- a/drivers/staging/android/binder.h
+++ b/drivers/staging/android/binder.h
@ -53,17 +53,17 @@ struct flat_binder_object {

 	/* 8 bytes of data. */
 	union {
-		void		*binder;	/* local object */
+		void __user	*binder;	/* local object */
 		signed long	handle;		/* remote object */
 	};

 	/* extra data associated with local object */
-	void			*cookie;
+	void __user		*cookie;
 };

 /*
 * On 64-bit platforms where user code may run in 32-bits the driver must
- * translate the buffer (and local binder) addresses apropriately.
+ * translate the buffer (and local binder) addresses appropriately.
 */

 struct binder_write_read {
@ -139,9 +139,9 @@ struct binder_transaction_data {
 	union {
 		struct {
 			/* transaction data */
-			const void	*buffer;
+			const void __user	*buffer;
 			/* offsets from buffer to flat_binder_object structs */
-			const void	*offsets;
+			const void __user	*offsets;
 		} ptr;
 		uint8_t	buf[8];
 	} data;
--- a/drivers/staging/android/logger.c
+++ b/drivers/staging/android/logger.c
@ -25,6 +25,7 @@
 #include <linux/poll.h>
 #include <linux/slab.h>
 #include <linux/time.h>
+#include <linux/vmalloc.h>
 #include "logger.h"

 #include <asm/ioctls.h>
@ -45,8 +46,12 @@ struct logger_log {
 	size_t			w_off;	/* current write head offset */
 	size_t			head;	/* new readers start here */
 	size_t			size;	/* size of the log */
+	struct list_head	logs;	/* list of log channels (myself)*/
 };

+static LIST_HEAD(log_list);
+
+
 /*
 * struct logger_reader - a logging device open for reading
 *
@ -60,9 +65,9 @@ struct logger_reader {
 };

 /* logger_offset - returns index 'n' into the log via (optimized) modulus */
-size_t logger_offset(struct logger_log *log, size_t n)
+static size_t logger_offset(struct logger_log *log, size_t n)
 {
-	return n & (log->size-1);
+	return n & (log->size - 1);
 }


@ -348,7 +353,7 @@ static ssize_t do_write_log_from_user(struct logger_log *log,
 * writev(), and aio_write(). Writes are our fast path, and we try to optimize
 * them above all else.
 */
-ssize_t logger_aio_write(struct kiocb *iocb, const struct iovec *iov,
+static ssize_t logger_aio_write(struct kiocb *iocb, const struct iovec *iov,
 			 unsigned long nr_segs, loff_t ppos)
 {
 	struct logger_log *log = file_get_log(iocb->ki_filp);
@ -408,7 +413,15 @@ ssize_t logger_aio_write(struct kiocb *iocb, const struct iovec *iov,
 	return ret;
 }

-static struct logger_log *get_log_from_minor(int);
+static struct logger_log *get_log_from_minor(int minor)
+{
+	struct logger_log *log;
+
+	list_for_each_entry(log, &log_list, logs)
+		if (log->misc.minor == minor)
+			return log;
+	return NULL;
+}

 /*
 * logger_open - the log's open() file operation
@ -565,80 +578,84 @@ static const struct file_operations logger_fops = {
 };

 /*
- * Defines a log structure with name 'NAME' and a size of 'SIZE' bytes, which
- * must be a power of two, greater than LOGGER_ENTRY_MAX_LEN, and less than
- * LONG_MAX minus LOGGER_ENTRY_MAX_LEN.
+ * Log size must be a power of two, greater than LOGGER_ENTRY_MAX_LEN,
+ * and less than LONG_MAX minus LOGGER_ENTRY_MAX_LEN.
 */
-#define DEFINE_LOGGER_DEVICE(VAR, NAME, SIZE) \
-static unsigned char _buf_ ## VAR[SIZE]; \
-static struct logger_log VAR = { \
-	.buffer = _buf_ ## VAR, \
-	.misc = { \
-		.minor = MISC_DYNAMIC_MINOR, \
-		.name = NAME, \
-		.fops = &logger_fops, \
-		.parent = NULL, \
-	}, \
-	.wq = __WAIT_QUEUE_HEAD_INITIALIZER(VAR .wq), \
-	.readers = LIST_HEAD_INIT(VAR .readers), \
-	.mutex = __MUTEX_INITIALIZER(VAR .mutex), \
-	.w_off = 0, \
-	.head = 0, \
-	.size = SIZE, \
-};
-
-DEFINE_LOGGER_DEVICE(log_main, LOGGER_LOG_MAIN, 256*1024)
-DEFINE_LOGGER_DEVICE(log_events, LOGGER_LOG_EVENTS, 256*1024)
-DEFINE_LOGGER_DEVICE(log_radio, LOGGER_LOG_RADIO, 256*1024)
-DEFINE_LOGGER_DEVICE(log_system, LOGGER_LOG_SYSTEM, 256*1024)
-
-static struct logger_log *get_log_from_minor(int minor)
+static int __init create_log(char *log_name, int size)
 {
-	if (log_main.misc.minor == minor)
-		return &log_main;
-	if (log_events.misc.minor == minor)
-		return &log_events;
-	if (log_radio.misc.minor == minor)
-		return &log_radio;
-	if (log_system.misc.minor == minor)
-		return &log_system;
-	return NULL;
-}
+	int ret = 0;
+	struct logger_log *log;
+	unsigned char *buffer;

-static int __init init_log(struct logger_log *log)
-{
-	int ret;
+	buffer = vmalloc(size);
+	if (buffer == NULL)
+		return -ENOMEM;

+	log = kzalloc(sizeof(struct logger_log), GFP_KERNEL);
+	if (log == NULL) {
+		ret = -ENOMEM;
+		goto out_free_buffer;
+	}
+	log->buffer = buffer;
+
+	log->misc.minor = MISC_DYNAMIC_MINOR;
+	log->misc.name = kstrdup(log_name, GFP_KERNEL);
+	if (log->misc.name == NULL) {
+		ret = -ENOMEM;
+		goto out_free_log;
+	}
+
+	log->misc.fops = &logger_fops;
+	log->misc.parent = NULL;
+
+	init_waitqueue_head(&log->wq);
+	INIT_LIST_HEAD(&log->readers);
+	mutex_init(&log->mutex);
+	log->w_off = 0;
+	log->head = 0;
+	log->size = size;
+
+	INIT_LIST_HEAD(&log->logs);
+	list_add_tail(&log->logs, &log_list);
+
+	/* finally, initialize the misc device for this log */
 	ret = misc_register(&log->misc);
 	if (unlikely(ret)) {
 		printk(KERN_ERR "logger: failed to register misc "
 		       "device for log '%s'!\n", log->misc.name);
-		return ret;
+		goto out_free_log;
 	}

 	printk(KERN_INFO "logger: created %luK log '%s'\n",
 	       (unsigned long) log->size >> 10, log->misc.name);

 	return 0;
+
+out_free_log:
+	kfree(log);
+
+out_free_buffer:
+	vfree(buffer);
+	return ret;
 }

 static int __init logger_init(void)
 {
 	int ret;

-	ret = init_log(&log_main);
+	ret = create_log(LOGGER_LOG_MAIN, 256*1024);
 	if (unlikely(ret))
 		goto out;

-	ret = init_log(&log_events);
+	ret = create_log(LOGGER_LOG_EVENTS, 256*1024);
 	if (unlikely(ret))
 		goto out;

-	ret = init_log(&log_radio);
+	ret = create_log(LOGGER_LOG_RADIO, 256*1024);
 	if (unlikely(ret))
 		goto out;

-	ret = init_log(&log_system);
+	ret = create_log(LOGGER_LOG_SYSTEM, 256*1024);
 	if (unlikely(ret))
 		goto out;

--- a/drivers/staging/android/ram_console.c
+++ b/drivers/staging/android/ram_console.c
@ -21,7 +21,7 @@
 #include <linux/string.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
-#include "persistent_ram.h"
+#include <linux/pstore_ram.h>
 #include "ram_console.h"

 static struct persistent_ram_zone *ram_console_zone;
--- a/drivers/staging/android/timed_output.c
+++ b/drivers/staging/android/timed_output.c
@ -99,6 +99,7 @@ EXPORT_SYMBOL_GPL(timed_output_dev_register);

 void timed_output_dev_unregister(struct timed_output_dev *tdev)
 {
+	tdev->enable(tdev, 0);
 	device_remove_file(tdev->dev, &dev_attr_enable);
 	device_destroy(timed_output_class, MKDEV(0, tdev->index));
 	dev_set_drvdata(tdev->dev, NULL);
--- a/drivers/staging/bcm/Adapter.h
+++ b/drivers/staging/bcm/Adapter.h
--- a/drivers/staging/bcm/DDRInit.c
+++ b/drivers/staging/bcm/DDRInit.c
@ -1115,20 +1115,20 @@ int download_ddr_settings(PMINI_ADAPTER Adapter)
 	    {
 	        case DDR_80_MHZ:
 				psDDRSetting = asT3LP_DDRSetting80MHz;
-                RegCount = (sizeof(asT3LP_DDRSetting80MHz)/sizeof(DDR_SET_NODE));
+                RegCount = ARRAY_SIZE(asT3LP_DDRSetting80MHz);
 				RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
                psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
 			break;
 		    case DDR_100_MHZ:
 				psDDRSetting = asT3LP_DDRSetting100MHz;
-			    RegCount = (sizeof(asT3LP_DDRSetting100MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3LP_DDRSetting100MHz);
 				RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
                psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
 			    break;
 		     case DDR_133_MHZ:
 				bOverrideSelfRefresh = TRUE;
 				psDDRSetting = asT3LP_DDRSetting133MHz;
-			    RegCount = (sizeof(asT3LP_DDRSetting133MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3LP_DDRSetting133MHz);
 				RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
 		        psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
 				break;
@ -1146,20 +1146,20 @@ int download_ddr_settings(PMINI_ADAPTER Adapter)
 	    {
 	        case DDR_80_MHZ:
 				psDDRSetting = asT3LPB_DDRSetting80MHz;
-                RegCount=(sizeof(asT3LPB_DDRSetting80MHz)/sizeof(DDR_SET_NODE));
+                RegCount=ARRAY_SIZE(asT3LPB_DDRSetting80MHz);
 				RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
                psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
 			break;
 		    case DDR_100_MHZ:
 				psDDRSetting = asT3LPB_DDRSetting100MHz;
-			    RegCount = (sizeof(asT3LPB_DDRSetting100MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3LPB_DDRSetting100MHz);
 				RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
                psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
 			    break;
 		     case DDR_133_MHZ:
 				bOverrideSelfRefresh = TRUE;
 				psDDRSetting = asT3LPB_DDRSetting133MHz;
-			    RegCount = (sizeof(asT3LPB_DDRSetting133MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3LPB_DDRSetting133MHz);
 				RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
 		        psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
 				break;
@ -1167,7 +1167,7 @@ int download_ddr_settings(PMINI_ADAPTER Adapter)
 			case DDR_160_MHZ:
 					bOverrideSelfRefresh = TRUE;
 					psDDRSetting = asT3LPB_DDRSetting160MHz;
-					RegCount = sizeof(asT3LPB_DDRSetting160MHz)/sizeof(DDR_SET_NODE);
+					RegCount = ARRAY_SIZE(asT3LPB_DDRSetting160MHz);
 					RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ;
 					psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ;

@ -1181,19 +1181,19 @@ int download_ddr_settings(PMINI_ADAPTER Adapter)
 	    {
 	        case DDR_80_MHZ:
 				psDDRSetting = asT3_DDRSetting80MHz;
-                RegCount = (sizeof(asT3_DDRSetting80MHz)/sizeof(DDR_SET_NODE));
+                RegCount = ARRAY_SIZE(asT3_DDRSetting80MHz);
 				RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
                psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
 			break;
 		    case DDR_100_MHZ:
 				psDDRSetting = asT3_DDRSetting100MHz;
-			    RegCount = (sizeof(asT3_DDRSetting100MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3_DDRSetting100MHz);
 				RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
                psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
 			    break;
 		     case DDR_133_MHZ:
 				psDDRSetting = asT3_DDRSetting133MHz;
-			    RegCount = (sizeof(asT3_DDRSetting133MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3_DDRSetting133MHz);
 				RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
 		        psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
 				break;
@ -1207,20 +1207,20 @@ int download_ddr_settings(PMINI_ADAPTER Adapter)
 		    {
 		        case DDR_80_MHZ:
 					psDDRSetting = asT3B_DDRSetting80MHz;
-                    RegCount = (sizeof(asT3B_DDRSetting80MHz)/sizeof(DDR_SET_NODE));
+                    RegCount = ARRAY_SIZE(asT3B_DDRSetting80MHz);
                    RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
                    psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
 			        break;
 		        case DDR_100_MHZ:
 					psDDRSetting = asT3B_DDRSetting100MHz;
-			        RegCount = (sizeof(asT3B_DDRSetting100MHz)/sizeof(DDR_SET_NODE));
+			        RegCount = ARRAY_SIZE(asT3B_DDRSetting100MHz);
                    RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
                    psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
 			        break;
 		        case DDR_133_MHZ:
 					bOverrideSelfRefresh = TRUE;
 					psDDRSetting = asT3B_DDRSetting133MHz;
-			        RegCount = (sizeof(asT3B_DDRSetting133MHz)/sizeof(DDR_SET_NODE));
+			        RegCount = ARRAY_SIZE(asT3B_DDRSetting133MHz);
 	                RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
 		            psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
 					break;
--- a/drivers/staging/bcm/IPv6Protocol.c
+++ b/drivers/staging/bcm/IPv6Protocol.c
@ -1,51 +1,52 @@
 #include "headers.h"

-static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Header *pstIpv6Header);
-static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Header *pstIpv6Header);
+static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,
+	IPV6Header *pstIpv6Header);
+static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,
+	IPV6Header *pstIpv6Header);
 static VOID DumpIpv6Header(IPV6Header *pstIpv6Header);

-static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader,BOOLEAN *bParseDone,USHORT *pusPayloadLength)
+static UCHAR *GetNextIPV6ChainedHeader(UCHAR **ppucPayload,
+	UCHAR *pucNextHeader, BOOLEAN *bParseDone, USHORT *pusPayloadLength)
 {
 	UCHAR *pucRetHeaderPtr = NULL;
 	UCHAR *pucPayloadPtr = NULL;
 	USHORT  usNextHeaderOffset = 0 ;
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);

-	if((NULL == ppucPayload) || (*pusPayloadLength == 0) || (*bParseDone))
-	{
+	if ((ppucPayload == NULL) || (*pusPayloadLength == 0) ||
+		(*bParseDone)) {
 		*bParseDone = TRUE;
 		return NULL;
-
 	}

 	pucRetHeaderPtr = *ppucPayload;
 	pucPayloadPtr = *ppucPayload;

-	if(!pucRetHeaderPtr || !pucPayloadPtr)
-	{
+	if (!pucRetHeaderPtr || !pucPayloadPtr) {
 		*bParseDone = TRUE;
 		return NULL;
 	}

-	//Get the Nextt Header Type
+	/* Get the Nextt Header Type */
 	*bParseDone = FALSE;


-
-	switch(*pucNextHeader)
-	{
+	switch (*pucNextHeader) {
 	case IPV6HDR_TYPE_HOPBYHOP:
 		{

-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 HopByHop Header");
-			usNextHeaderOffset+=sizeof(IPV6HopByHopOptionsHeader);
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 HopByHop Header");
+			usNextHeaderOffset += sizeof(IPV6HopByHopOptionsHeader);
 		}
 		break;

 	case IPV6HDR_TYPE_ROUTING:
 		{
 			IPV6RoutingHeader *pstIpv6RoutingHeader;
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Routing Header");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 Routing Header");
 			pstIpv6RoutingHeader = (IPV6RoutingHeader *)pucPayloadPtr;
 			usNextHeaderOffset += sizeof(IPV6RoutingHeader);
 			usNextHeaderOffset += pstIpv6RoutingHeader->ucNumAddresses * IPV6_ADDRESS_SIZEINBYTES;
@ -54,8 +55,10 @@ static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader
 		break;
 	case IPV6HDR_TYPE_FRAGMENTATION:
 		{
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Fragmentation Header");
-			usNextHeaderOffset+= sizeof(IPV6FragmentHeader);
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL,
+					"\nIPv6 Fragmentation Header");
+			usNextHeaderOffset += sizeof(IPV6FragmentHeader);

 		}
 		break;
@ -63,9 +66,11 @@ static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader
 		{
 			IPV6DestOptionsHeader *pstIpv6DestOptsHdr = (IPV6DestOptionsHeader *)pucPayloadPtr;
 			int nTotalOptions = pstIpv6DestOptsHdr->ucHdrExtLen;
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 DestOpts Header Header");
-			usNextHeaderOffset+= sizeof(IPV6DestOptionsHeader);
-			usNextHeaderOffset+= nTotalOptions * IPV6_DESTOPTS_HDR_OPTIONSIZE ;
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL,
+					"\nIPv6 DestOpts Header Header");
+			usNextHeaderOffset += sizeof(IPV6DestOptionsHeader);
+			usNextHeaderOffset += nTotalOptions * IPV6_DESTOPTS_HDR_OPTIONSIZE ;

 		}
 		break;
@ -73,36 +78,43 @@ static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader
 		{
 			IPV6AuthenticationHeader *pstIpv6AuthHdr = (IPV6AuthenticationHeader *)pucPayloadPtr;
 			int nHdrLen = pstIpv6AuthHdr->ucLength;
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Authentication Header");
-			usNextHeaderOffset+= nHdrLen * 4;
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL,
+					"\nIPv6 Authentication Header");
+			usNextHeaderOffset += nHdrLen * 4;
 		}
 		break;
 	case IPV6HDR_TYPE_ENCRYPTEDSECURITYPAYLOAD:
 		{
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Encrypted Security Payload Header");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL,
+					"\nIPv6 Encrypted Security Payload Header");
 			*bParseDone = TRUE;

 		}
 		break;
 	case IPV6_ICMP_HDR_TYPE:
 		{
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, " ICMP Header");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nICMP Header");
 			*bParseDone = TRUE;
 		}
 		break;
 	case TCP_HEADER_TYPE:
 		{
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, " \nTCP Header");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nTCP Header");
 			*bParseDone = TRUE;
 		}
 		break;
 	case UDP_HEADER_TYPE:
 		{
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, " \nUDP Header");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nUDP Header");
 			*bParseDone = TRUE;
 		}
 		break;
-	default :
+	default:
 		{
 			*bParseDone = TRUE;

@ -112,53 +124,49 @@ static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader

 	}

-	if(*bParseDone == FALSE)
-	{
-		if(*pusPayloadLength <= usNextHeaderOffset)
-		{
+	if (*bParseDone == FALSE) {
+		if (*pusPayloadLength <= usNextHeaderOffset) {
 			*bParseDone = TRUE;
-		}
-		else
-		{
+		} else {
 			*pucNextHeader = *pucPayloadPtr;
-			pucPayloadPtr+=usNextHeaderOffset;
-			(*pusPayloadLength)-=usNextHeaderOffset;
+			pucPayloadPtr += usNextHeaderOffset;
+			(*pusPayloadLength) -= usNextHeaderOffset;
 		}

 	}

-
-
 	*ppucPayload = pucPayloadPtr;
 	return pucRetHeaderPtr;
 }


-static UCHAR GetIpv6ProtocolPorts(UCHAR *pucPayload,USHORT *pusSrcPort,USHORT *pusDestPort,USHORT usPayloadLength,UCHAR ucNextHeader)
+static UCHAR GetIpv6ProtocolPorts(UCHAR *pucPayload, USHORT *pusSrcPort,
+	USHORT *pusDestPort, USHORT usPayloadLength, UCHAR ucNextHeader)
 {
 	UCHAR *pIpv6HdrScanContext = pucPayload;
 	BOOLEAN bDone = FALSE;
-	UCHAR ucHeaderType =0;
+	UCHAR ucHeaderType = 0;
 	UCHAR *pucNextHeader = NULL;
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);

-	if( !pucPayload || (usPayloadLength == 0))
-	{
+	if (!pucPayload || (usPayloadLength == 0))
 		return 0;
-	}

 	*pusSrcPort = *pusDestPort = 0;
 	ucHeaderType = ucNextHeader;
-	while(!bDone)
-	{
-		pucNextHeader = GetNextIPV6ChainedHeader(&pIpv6HdrScanContext,&ucHeaderType,&bDone,&usPayloadLength);
-		if(bDone)
-		{
-			if((ucHeaderType==TCP_HEADER_TYPE) || (ucHeaderType == UDP_HEADER_TYPE))
-			{
-				 *pusSrcPort=*((PUSHORT)(pucNextHeader));
-				 *pusDestPort=*((PUSHORT)(pucNextHeader+2));
-				 BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, " \nProtocol Ports - Src Port :0x%x Dest Port : 0x%x",ntohs(*pusSrcPort),ntohs(*pusDestPort));
+	while (!bDone) {
+		pucNextHeader = GetNextIPV6ChainedHeader(&pIpv6HdrScanContext,
+					&ucHeaderType, &bDone, &usPayloadLength);
+		if (bDone) {
+			if ((ucHeaderType == TCP_HEADER_TYPE) ||
+				(ucHeaderType == UDP_HEADER_TYPE)) {
+				*pusSrcPort = *((PUSHORT)(pucNextHeader));
+				*pusDestPort = *((PUSHORT)(pucNextHeader+2));
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+						DBG_LVL_ALL,
+						"\nProtocol Ports - Src Port :0x%x Dest Port : 0x%x",
+						ntohs(*pusSrcPort),
+						ntohs(*pusDestPort));
 			}
 			break;

@ -168,92 +176,111 @@ static UCHAR GetIpv6ProtocolPorts(UCHAR *pucPayload,USHORT *pusSrcPort,USHORT *p
 }


-
-USHORT	IpVersion6(PMINI_ADAPTER Adapter, /**< Pointer to the driver control structure */
-					PVOID pcIpHeader, /**<Pointer to the IP Hdr of the packet*/
-					S_CLASSIFIER_RULE *pstClassifierRule )
+/*
+ * Arg 1 PMINI_ADAPTER Adapter is a pointer ot the driver contorl structure
+ * Arg 2 PVOID pcIpHeader is a pointer to the IP header of the packet
+ */
+USHORT	IpVersion6(PMINI_ADAPTER Adapter, PVOID pcIpHeader,
+					S_CLASSIFIER_RULE *pstClassifierRule)
 {
 	USHORT	ushDestPort = 0;
 	USHORT	ushSrcPort = 0;
-	UCHAR   ucNextProtocolAboveIP =0;
+	UCHAR   ucNextProtocolAboveIP = 0;
 	IPV6Header *pstIpv6Header = NULL;
 	BOOLEAN bClassificationSucceed = FALSE;

-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "IpVersion6 ==========>\n");
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+			DBG_LVL_ALL, "IpVersion6 ==========>\n");

 	pstIpv6Header = (IPV6Header *)pcIpHeader;

 	DumpIpv6Header(pstIpv6Header);

-	//Try to get the next higher layer protocol and the Ports Nos if TCP or UDP
+	/*
+	 * Try to get the next higher layer protocol
+	 * and the Ports Nos if TCP or UDP
+	 */
 	ucNextProtocolAboveIP = GetIpv6ProtocolPorts((UCHAR *)(pcIpHeader + sizeof(IPV6Header)),
 							&ushSrcPort,
 							&ushDestPort,
 							pstIpv6Header->usPayloadLength,
 							pstIpv6Header->ucNextHeader);

-	do
-	{
-		if(0 == pstClassifierRule->ucDirection)
-		{
-			//cannot be processed for classification.
-		   // it is a down link connection
+	do {
+		if (pstClassifierRule->ucDirection == 0) {
+			/*
+			 * cannot be processed for classification.
+			 * it is a down link connection
+			 */
 			break;
 		}

-		if(!pstClassifierRule->bIpv6Protocol)
-		{
-			//We are looking for Ipv6 Classifiers . Lets ignore this classifier and try the next one.
+		if (!pstClassifierRule->bIpv6Protocol) {
+			/*
+			 * We are looking for Ipv6 Classifiers
+			 * Lets ignore this classifier and try the next one
+			 */
 			break;
 		}

-		bClassificationSucceed=MatchSrcIpv6Address(pstClassifierRule,pstIpv6Header);
-        if(!bClassificationSucceed)
-            break;
+		bClassificationSucceed = MatchSrcIpv6Address(pstClassifierRule,
+								pstIpv6Header);
+		if (!bClassificationSucceed)
+			break;

-        bClassificationSucceed=MatchDestIpv6Address(pstClassifierRule,pstIpv6Header);
-        if(!bClassificationSucceed)
-            break;
+		bClassificationSucceed = MatchDestIpv6Address(pstClassifierRule,
+								pstIpv6Header);
+		if (!bClassificationSucceed)
+			break;

-		//Match the protocol type.For IPv6 the next protocol at end of Chain of IPv6 prot headers
-		bClassificationSucceed=MatchProtocol(pstClassifierRule,ucNextProtocolAboveIP);
-        if(!bClassificationSucceed)
-            break;
-        BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Protocol Matched");
+		/*
+		 * Match the protocol type.
+		 * For IPv6 the next protocol at end of
+		 * Chain of IPv6 prot headers
+		 */
+		bClassificationSucceed = MatchProtocol(pstClassifierRule,
+							ucNextProtocolAboveIP);
+		if (!bClassificationSucceed)
+			break;

-		if((ucNextProtocolAboveIP == TCP_HEADER_TYPE) || (ucNextProtocolAboveIP == UDP_HEADER_TYPE))
-		{
-			//Match Src Port
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Source Port:%x\n",ntohs(ushSrcPort));
-			bClassificationSucceed=MatchSrcPort(pstClassifierRule,ntohs(ushSrcPort));
-			if(!bClassificationSucceed)
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+				DBG_LVL_ALL, "\nIPv6 Protocol Matched");
+
+		if ((ucNextProtocolAboveIP == TCP_HEADER_TYPE) ||
+			(ucNextProtocolAboveIP == UDP_HEADER_TYPE)) {
+			/* Match Src Port */
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 Source Port:%x\n",
+					ntohs(ushSrcPort));
+			bClassificationSucceed = MatchSrcPort(pstClassifierRule,
+							ntohs(ushSrcPort));
+			if (!bClassificationSucceed)
 				break;

-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Src Port Matched");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 Src Port Matched");

-			//Match Dest Port
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Destination Port:%x\n",ntohs(ushDestPort));
-			bClassificationSucceed=MatchDestPort(pstClassifierRule,ntohs(ushDestPort));
-			if(!bClassificationSucceed)
+			/* Match Dest Port */
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 Destination Port:%x\n",
+					ntohs(ushDestPort));
+			bClassificationSucceed = MatchDestPort(pstClassifierRule,
+							ntohs(ushDestPort));
+			if (!bClassificationSucceed)
 				break;
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Dest Port Matched");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 Dest Port Matched");
 		}
-	}while(0);
+	} while (0);

-	if(TRUE==bClassificationSucceed)
-	{
+	if (bClassificationSucceed == TRUE) {
 		INT iMatchedSFQueueIndex = 0;
-		iMatchedSFQueueIndex = SearchSfid(Adapter,pstClassifierRule->ulSFID);
-		if(iMatchedSFQueueIndex >= NO_OF_QUEUES)
-		{
+		iMatchedSFQueueIndex = SearchSfid(Adapter, pstClassifierRule->ulSFID);
+		if (iMatchedSFQueueIndex >= NO_OF_QUEUES) {
 			bClassificationSucceed = FALSE;
-		}
-		else
-		{
-			if(FALSE == Adapter->PackInfo[iMatchedSFQueueIndex].bActive)
-			{
+		} else {
+			if (Adapter->PackInfo[iMatchedSFQueueIndex].bActive == FALSE)
 				bClassificationSucceed = FALSE;
-			}
 		}
 	}

@ -261,52 +288,55 @@ USHORT	IpVersion6(PMINI_ADAPTER Adapter, /**< Pointer to the driver control stru
 }


-static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Header *pstIpv6Header)
+static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,
+	IPV6Header *pstIpv6Header)
 {
-	UINT uiLoopIndex=0;
-	UINT  uiIpv6AddIndex=0;
-	UINT  uiIpv6AddrNoLongWords = 4;
+	UINT uiLoopIndex = 0;
+	UINT uiIpv6AddIndex = 0;
+	UINT uiIpv6AddrNoLongWords = 4;
 	ULONG aulSrcIP[4];
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
 	/*
-	//This is the no. of Src Addresses ie Range of IP Addresses contained
-	//in the classifier rule for which we need to match
-	*/
+	 * This is the no. of Src Addresses ie Range of IP Addresses contained
+	 * in the classifier rule for which we need to match
+	 */
 	UINT  uiCountIPSrcAddresses = (UINT)pstClassifierRule->ucIPSourceAddressLength;


-	if(0 == uiCountIPSrcAddresses)
+	if (uiCountIPSrcAddresses == 0)
 		return TRUE;


-	//First Convert the Ip Address in the packet to Host Endian order
-	for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++)
-	{
-		aulSrcIP[uiIpv6AddIndex]=ntohl(pstIpv6Header->ulSrcIpAddress[uiIpv6AddIndex]);
-	}
+	/* First Convert the Ip Address in the packet to Host Endian order */
+	for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++)
+		aulSrcIP[uiIpv6AddIndex] = ntohl(pstIpv6Header->ulSrcIpAddress[uiIpv6AddIndex]);

-	for(uiLoopIndex=0;uiLoopIndex<uiCountIPSrcAddresses;uiLoopIndex+=uiIpv6AddrNoLongWords)
-	{
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Received Packet : \n ");
+	for (uiLoopIndex = 0; uiLoopIndex < uiCountIPSrcAddresses; uiLoopIndex += uiIpv6AddrNoLongWords) {
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Src Ipv6 Address In Received Packet :\n ");
 		DumpIpv6Address(aulSrcIP);
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Mask In Classifier Rule: \n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Src Ipv6 Mask In Classifier Rule:\n");
 		DumpIpv6Address(&pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex]);
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Classifier Rule : \n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Src Ipv6 Address In Classifier Rule :\n");
 		DumpIpv6Address(&pstClassifierRule->stSrcIpAddress.ulIpv6Addr[uiLoopIndex]);

-		for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++)
-		{
-			if((pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulSrcIP[uiIpv6AddIndex])
-				!= pstClassifierRule->stSrcIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex])
-			{
-				//Match failed for current Ipv6 Address.Try next Ipv6 Address
+		for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++) {
+			if ((pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulSrcIP[uiIpv6AddIndex])
+				!= pstClassifierRule->stSrcIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex]) {
+				/*
+				 * Match failed for current Ipv6 Address
+				 * Try next Ipv6 Address
+				 */
 				break;
 			}

-			if(uiIpv6AddIndex ==  uiIpv6AddrNoLongWords-1)
-			{
-				//Match Found
-				BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Ipv6 Src Ip Address Matched\n");
+			if (uiIpv6AddIndex ==  uiIpv6AddrNoLongWords-1) {
+				/* Match Found */
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+						DBG_LVL_ALL,
+						"Ipv6 Src Ip Address Matched\n");
 				return TRUE;
 			}
 		}
@ -314,52 +344,56 @@ static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Head
 	return FALSE;
 }

-static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Header *pstIpv6Header)
+static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,
+	IPV6Header *pstIpv6Header)
 {
-	UINT uiLoopIndex=0;
-	UINT  uiIpv6AddIndex=0;
-	UINT  uiIpv6AddrNoLongWords = 4;
+	UINT uiLoopIndex = 0;
+	UINT uiIpv6AddIndex = 0;
+	UINT uiIpv6AddrNoLongWords = 4;
 	ULONG aulDestIP[4];
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
 	/*
-	//This is the no. of Destination Addresses ie Range of IP Addresses contained
-	//in the classifier rule for which we need to match
-	*/
+	 * This is the no. of Destination Addresses
+	 * ie Range of IP Addresses contained in the classifier rule
+	 * for which we need to match
+	 */
 	UINT  uiCountIPDestinationAddresses = (UINT)pstClassifierRule->ucIPDestinationAddressLength;


-	if(0 == uiCountIPDestinationAddresses)
+	if (uiCountIPDestinationAddresses == 0)
 		return TRUE;


-	//First Convert the Ip Address in the packet to Host Endian order
-	for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++)
-	{
-		aulDestIP[uiIpv6AddIndex]=ntohl(pstIpv6Header->ulDestIpAddress[uiIpv6AddIndex]);
-	}
+	/* First Convert the Ip Address in the packet to Host Endian order */
+	for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++)
+		aulDestIP[uiIpv6AddIndex] = ntohl(pstIpv6Header->ulDestIpAddress[uiIpv6AddIndex]);

-	for(uiLoopIndex=0;uiLoopIndex<uiCountIPDestinationAddresses;uiLoopIndex+=uiIpv6AddrNoLongWords)
-	{
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Address In Received Packet : \n ");
+	for (uiLoopIndex = 0; uiLoopIndex < uiCountIPDestinationAddresses; uiLoopIndex += uiIpv6AddrNoLongWords) {
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Destination Ipv6 Address In Received Packet :\n ");
 		DumpIpv6Address(aulDestIP);
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Mask In Classifier Rule: \n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Destination Ipv6 Mask In Classifier Rule :\n");
 		DumpIpv6Address(&pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex]);
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Address In Classifier Rule : \n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Destination Ipv6 Address In Classifier Rule :\n");
 		DumpIpv6Address(&pstClassifierRule->stDestIpAddress.ulIpv6Addr[uiLoopIndex]);

-		for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++)
-		{
-			if((pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulDestIP[uiIpv6AddIndex])
-				!= pstClassifierRule->stDestIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex])
-			{
-				//Match failed for current Ipv6 Address.Try next Ipv6 Address
+		for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++) {
+			if ((pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulDestIP[uiIpv6AddIndex])
+				!= pstClassifierRule->stDestIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex]) {
+				/*
+				 * Match failed for current Ipv6 Address.
+				 * Try next Ipv6 Address
+				 */
 				break;
 			}

-			if(uiIpv6AddIndex ==  uiIpv6AddrNoLongWords-1)
-			{
-				//Match Found
-				BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Ipv6 Destination Ip Address Matched\n");
+			if (uiIpv6AddIndex ==  uiIpv6AddrNoLongWords-1) {
+				/* Match Found */
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+						DBG_LVL_ALL,
+						"Ipv6 Destination Ip Address Matched\n");
 				return TRUE;
 			}
 		}
@ -371,11 +405,11 @@ static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Hea
 VOID DumpIpv6Address(ULONG *puIpv6Address)
 {
 	UINT uiIpv6AddrNoLongWords = 4;
-	UINT  uiIpv6AddIndex=0;
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
-	for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++)
-	{
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, ":%lx",puIpv6Address[uiIpv6AddIndex]);
+	UINT uiIpv6AddIndex = 0;
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++) {
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				":%lx", puIpv6Address[uiIpv6AddIndex]);
 	}

 }
@ -383,22 +417,35 @@ VOID DumpIpv6Address(ULONG *puIpv6Address)
 static VOID DumpIpv6Header(IPV6Header *pstIpv6Header)
 {
 	UCHAR ucVersion;
-	UCHAR  ucPrio ;
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "----Ipv6 Header---");
+	UCHAR ucPrio;
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"----Ipv6 Header---");
 	ucVersion = pstIpv6Header->ucVersionPrio & 0xf0;
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Version : %x \n",ucVersion);
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Version : %x\n", ucVersion);
 	ucPrio = pstIpv6Header->ucVersionPrio & 0x0f;
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Priority : %x \n",ucPrio);
-	//BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Flow Label : %x \n",(pstIpv6Header->ucVersionPrio &0xf0);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Payload Length : %x \n",ntohs(pstIpv6Header->usPayloadLength));
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Next Header : %x \n",pstIpv6Header->ucNextHeader);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Hop Limit : %x \n",pstIpv6Header->ucHopLimit);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Src Address :\n");
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Priority : %x\n", ucPrio);
+	/*
+	 * BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+	 * "Flow Label : %x\n",(pstIpv6Header->ucVersionPrio &0xf0);
+	 */
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Payload Length : %x\n",
+			ntohs(pstIpv6Header->usPayloadLength));
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Next Header : %x\n", pstIpv6Header->ucNextHeader);
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Hop Limit : %x\n", pstIpv6Header->ucHopLimit);
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Src Address :\n");
 	DumpIpv6Address(pstIpv6Header->ulSrcIpAddress);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Dest Address :\n");
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Dest Address :\n");
 	DumpIpv6Address(pstIpv6Header->ulDestIpAddress);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "----Ipv6 Header End---");
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"----Ipv6 Header End---");


 }
--- a/drivers/staging/bcm/Misc.c
+++ b/drivers/staging/bcm/Misc.c
@ -835,7 +835,7 @@ int reset_card_proc(PMINI_ADAPTER ps_adapter)
 	Bcm_kill_all_URBs(psIntfAdapter);
 	/* Reset the UMA-B Device */
 	if (ps_adapter->chip_id >= T3LPB) {
-		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Reseting UMA-B\n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Resetting UMA-B\n");
 		retval = usb_reset_device(psIntfAdapter->udev);
 		psIntfAdapter->psAdapter->StopAllXaction = FALSE;

--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
--- a/drivers/staging/comedi/comedi.h
+++ b/drivers/staging/comedi/comedi.h
@ -465,7 +465,7 @@
 /* only relevant to kernel modules. */

 #define COMEDI_CB_EOS		1	/* end of scan */
-#define COMEDI_CB_EOA		2	/* end of acquisition */
+#define COMEDI_CB_EOA		2	/* end of acquisition/output */
 #define COMEDI_CB_BLOCK		4	/* data has arrived:
 					 * wakes up read() / write() */
 #define COMEDI_CB_EOBUF		8	/* DEPRECATED: end of buffer */
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@ -58,14 +58,35 @@ MODULE_LICENSE("GPL");
 #ifdef CONFIG_COMEDI_DEBUG
 int comedi_debug;
 EXPORT_SYMBOL(comedi_debug);
-module_param(comedi_debug, int, 0644);
+module_param(comedi_debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(comedi_debug,
+		 "enable comedi core and driver debugging if non-zero (default 0)"
+		);
 #endif

 bool comedi_autoconfig = 1;
-module_param(comedi_autoconfig, bool, 0444);
+module_param(comedi_autoconfig, bool, S_IRUGO);
+MODULE_PARM_DESC(comedi_autoconfig,
+		 "enable drivers to auto-configure comedi devices (default 1)");

 static int comedi_num_legacy_minors;
-module_param(comedi_num_legacy_minors, int, 0444);
+module_param(comedi_num_legacy_minors, int, S_IRUGO);
+MODULE_PARM_DESC(comedi_num_legacy_minors,
+		 "number of comedi minor devices to reserve for non-auto-configured devices (default 0)"
+		);
+
+unsigned int comedi_default_buf_size_kb = CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB;
+module_param(comedi_default_buf_size_kb, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(comedi_default_buf_size_kb,
+		 "default asynchronous buffer size in KiB (default "
+		 __MODULE_STRING(CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB) ")");
+
+unsigned int comedi_default_buf_maxsize_kb
+	= CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB;
+module_param(comedi_default_buf_maxsize_kb, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(comedi_default_buf_maxsize_kb,
+		 "default maximum size of asynchronous buffer in KiB (default "
+		 __MODULE_STRING(CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB) ")");

 static DEFINE_SPINLOCK(comedi_file_info_table_lock);
 static struct comedi_device_file_info
@ -108,15 +129,283 @@ static int do_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
 static int comedi_fasync(int fd, struct file *file, int on);

 static int is_device_busy(struct comedi_device *dev);
+
 static int resize_async_buffer(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_async *async, unsigned new_size);
+			       struct comedi_async *async, unsigned new_size)
+{
+	int retval;

-/* declarations for sysfs attribute files */
-static struct device_attribute dev_attr_max_read_buffer_kb;
-static struct device_attribute dev_attr_read_buffer_kb;
-static struct device_attribute dev_attr_max_write_buffer_kb;
-static struct device_attribute dev_attr_write_buffer_kb;
+	if (new_size > async->max_bufsize)
+		return -EPERM;
+
+	if (s->busy) {
+		DPRINTK("subdevice is busy, cannot resize buffer\n");
+		return -EBUSY;
+	}
+	if (async->mmap_count) {
+		DPRINTK("subdevice is mmapped, cannot resize buffer\n");
+		return -EBUSY;
+	}
+
+	if (!async->prealloc_buf)
+		return -EINVAL;
+
+	/* make sure buffer is an integral number of pages
+	 * (we round up) */
+	new_size = (new_size + PAGE_SIZE - 1) & PAGE_MASK;
+
+	retval = comedi_buf_alloc(dev, s, new_size);
+	if (retval < 0)
+		return retval;
+
+	if (s->buf_change) {
+		retval = s->buf_change(dev, s, new_size);
+		if (retval < 0)
+			return retval;
+	}
+
+	DPRINTK("comedi%i subd %d buffer resized to %i bytes\n",
+		dev->minor, (int)(s - dev->subdevices), async->prealloc_bufsz);
+	return 0;
+}
+
+/* sysfs attribute files */
+
+static const unsigned bytes_per_kibi = 1024;
+
+static ssize_t show_max_read_buffer_kb(struct device *dev,
+				       struct device_attribute *attr, char *buf)
+{
+	ssize_t retval;
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned max_buffer_size_kb = 0;
+	struct comedi_subdevice *const read_subdevice =
+	    comedi_get_read_subdevice(info);
+
+	mutex_lock(&info->device->mutex);
+	if (read_subdevice &&
+	    (read_subdevice->subdev_flags & SDF_CMD_READ) &&
+	    read_subdevice->async) {
+		max_buffer_size_kb = read_subdevice->async->max_bufsize /
+		    bytes_per_kibi;
+	}
+	retval = snprintf(buf, PAGE_SIZE, "%i\n", max_buffer_size_kb);
+	mutex_unlock(&info->device->mutex);
+
+	return retval;
+}
+
+static ssize_t store_max_read_buffer_kb(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned int new_max_size_kb;
+	unsigned int new_max_size;
+	int ret;
+	struct comedi_subdevice *const read_subdevice =
+	    comedi_get_read_subdevice(info);
+
+	ret = kstrtouint(buf, 10, &new_max_size_kb);
+	if (ret)
+		return ret;
+	if (new_max_size_kb > (UINT_MAX / bytes_per_kibi))
+		return -EINVAL;
+	new_max_size = new_max_size_kb * bytes_per_kibi;
+
+	mutex_lock(&info->device->mutex);
+	if (read_subdevice == NULL ||
+	    (read_subdevice->subdev_flags & SDF_CMD_READ) == 0 ||
+	    read_subdevice->async == NULL) {
+		mutex_unlock(&info->device->mutex);
+		return -EINVAL;
+	}
+	read_subdevice->async->max_bufsize = new_max_size;
+	mutex_unlock(&info->device->mutex);
+
+	return count;
+}
+
+static ssize_t show_read_buffer_kb(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	ssize_t retval;
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned buffer_size_kb = 0;
+	struct comedi_subdevice *const read_subdevice =
+	    comedi_get_read_subdevice(info);
+
+	mutex_lock(&info->device->mutex);
+	if (read_subdevice &&
+	    (read_subdevice->subdev_flags & SDF_CMD_READ) &&
+	    read_subdevice->async) {
+		buffer_size_kb = read_subdevice->async->prealloc_bufsz /
+		    bytes_per_kibi;
+	}
+	retval = snprintf(buf, PAGE_SIZE, "%i\n", buffer_size_kb);
+	mutex_unlock(&info->device->mutex);
+
+	return retval;
+}
+
+static ssize_t store_read_buffer_kb(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned int new_size_kb;
+	unsigned int new_size;
+	int retval;
+	int ret;
+	struct comedi_subdevice *const read_subdevice =
+	    comedi_get_read_subdevice(info);
+
+	ret = kstrtouint(buf, 10, &new_size_kb);
+	if (ret)
+		return ret;
+	if (new_size_kb > (UINT_MAX / bytes_per_kibi))
+		return -EINVAL;
+	new_size = new_size_kb * bytes_per_kibi;
+
+	mutex_lock(&info->device->mutex);
+	if (read_subdevice == NULL ||
+	    (read_subdevice->subdev_flags & SDF_CMD_READ) == 0 ||
+	    read_subdevice->async == NULL) {
+		mutex_unlock(&info->device->mutex);
+		return -EINVAL;
+	}
+	retval = resize_async_buffer(info->device, read_subdevice,
+				     read_subdevice->async, new_size);
+	mutex_unlock(&info->device->mutex);
+
+	if (retval < 0)
+		return retval;
+	return count;
+}
+
+static ssize_t show_max_write_buffer_kb(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	ssize_t retval;
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned max_buffer_size_kb = 0;
+	struct comedi_subdevice *const write_subdevice =
+	    comedi_get_write_subdevice(info);
+
+	mutex_lock(&info->device->mutex);
+	if (write_subdevice &&
+	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) &&
+	    write_subdevice->async) {
+		max_buffer_size_kb = write_subdevice->async->max_bufsize /
+		    bytes_per_kibi;
+	}
+	retval = snprintf(buf, PAGE_SIZE, "%i\n", max_buffer_size_kb);
+	mutex_unlock(&info->device->mutex);
+
+	return retval;
+}
+
+static ssize_t store_max_write_buffer_kb(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned int new_max_size_kb;
+	unsigned int new_max_size;
+	int ret;
+	struct comedi_subdevice *const write_subdevice =
+	    comedi_get_write_subdevice(info);
+
+	ret = kstrtouint(buf, 10, &new_max_size_kb);
+	if (ret)
+		return ret;
+	if (new_max_size_kb > (UINT_MAX / bytes_per_kibi))
+		return -EINVAL;
+	new_max_size = new_max_size_kb * bytes_per_kibi;
+
+	mutex_lock(&info->device->mutex);
+	if (write_subdevice == NULL ||
+	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) == 0 ||
+	    write_subdevice->async == NULL) {
+		mutex_unlock(&info->device->mutex);
+		return -EINVAL;
+	}
+	write_subdevice->async->max_bufsize = new_max_size;
+	mutex_unlock(&info->device->mutex);
+
+	return count;
+}
+
+static ssize_t show_write_buffer_kb(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	ssize_t retval;
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned buffer_size_kb = 0;
+	struct comedi_subdevice *const write_subdevice =
+	    comedi_get_write_subdevice(info);
+
+	mutex_lock(&info->device->mutex);
+	if (write_subdevice &&
+	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) &&
+	    write_subdevice->async) {
+		buffer_size_kb = write_subdevice->async->prealloc_bufsz /
+		    bytes_per_kibi;
+	}
+	retval = snprintf(buf, PAGE_SIZE, "%i\n", buffer_size_kb);
+	mutex_unlock(&info->device->mutex);
+
+	return retval;
+}
+
+static ssize_t store_write_buffer_kb(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned int new_size_kb;
+	unsigned int new_size;
+	int retval;
+	int ret;
+	struct comedi_subdevice *const write_subdevice =
+	    comedi_get_write_subdevice(info);
+
+	ret = kstrtouint(buf, 10, &new_size_kb);
+	if (ret)
+		return ret;
+	if (new_size_kb > (UINT_MAX / bytes_per_kibi))
+		return -EINVAL;
+	new_size = ((uint64_t) new_size_kb) * bytes_per_kibi;
+
+	mutex_lock(&info->device->mutex);
+	if (write_subdevice == NULL ||
+	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) == 0 ||
+	    write_subdevice->async == NULL) {
+		mutex_unlock(&info->device->mutex);
+		return -EINVAL;
+	}
+	retval = resize_async_buffer(info->device, write_subdevice,
+				     write_subdevice->async, new_size);
+	mutex_unlock(&info->device->mutex);
+
+	if (retval < 0)
+		return retval;
+	return count;
+}
+
+static struct device_attribute comedi_dev_attrs[] = {
+	__ATTR(max_read_buffer_kb, S_IRUGO | S_IWUSR,
+		show_max_read_buffer_kb, store_max_read_buffer_kb),
+	__ATTR(read_buffer_kb, S_IRUGO | S_IWUSR | S_IWGRP,
+		show_read_buffer_kb, store_read_buffer_kb),
+	__ATTR(max_write_buffer_kb, S_IRUGO | S_IWUSR,
+		show_max_write_buffer_kb, store_max_write_buffer_kb),
+	__ATTR(write_buffer_kb, S_IRUGO | S_IWUSR | S_IWGRP,
+		show_write_buffer_kb, store_write_buffer_kb),
+	__ATTR_NULL
+};

 static long comedi_unlocked_ioctl(struct file *file, unsigned int cmd,
 				  unsigned long arg)
@ -280,7 +569,7 @@ static int do_devconfig_ioctl(struct comedi_device *dev,
 	if (ret == 0) {
 		if (!try_module_get(dev->driver->module)) {
 			comedi_device_detach(dev);
-			return -ENOSYS;
+			ret = -ENOSYS;
 		}
 	}

@ -1545,7 +1834,7 @@ done:
 	return retval;
 }

-static unsigned int comedi_poll(struct file *file, poll_table * wait)
+static unsigned int comedi_poll(struct file *file, poll_table *wait)
 {
 	unsigned int mask = 0;
 	const unsigned minor = iminor(file->f_dentry->d_inode);
@ -2054,6 +2343,8 @@ static int __init comedi_init(void)
 		return PTR_ERR(comedi_class);
 	}

+	comedi_class->dev_attrs = comedi_dev_attrs;
+
 	/* XXX requires /proc interface */
 	comedi_proc_init();

@ -2192,11 +2483,9 @@ static void comedi_device_cleanup(struct comedi_device *dev)

 int comedi_alloc_board_minor(struct device *hardware_device)
 {
-	unsigned long flags;
 	struct comedi_device_file_info *info;
 	struct device *csdev;
 	unsigned i;
-	int retval;

 	info = kzalloc(sizeof(struct comedi_device_file_info), GFP_KERNEL);
 	if (info == NULL)
@ -2206,15 +2495,16 @@ int comedi_alloc_board_minor(struct device *hardware_device)
 		kfree(info);
 		return -ENOMEM;
 	}
+	info->hardware_device = hardware_device;
 	comedi_device_init(info->device);
-	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock(&comedi_file_info_table_lock);
 	for (i = 0; i < COMEDI_NUM_BOARD_MINORS; ++i) {
 		if (comedi_file_info_table[i] == NULL) {
 			comedi_file_info_table[i] = info;
 			break;
 		}
 	}
-	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock(&comedi_file_info_table_lock);
 	if (i == COMEDI_NUM_BOARD_MINORS) {
 		comedi_device_cleanup(info->device);
 		kfree(info->device);
@ -2230,55 +2520,19 @@ int comedi_alloc_board_minor(struct device *hardware_device)
 	if (!IS_ERR(csdev))
 		info->device->class_dev = csdev;
 	dev_set_drvdata(csdev, info);
-	retval = device_create_file(csdev, &dev_attr_max_read_buffer_kb);
-	if (retval) {
-		printk(KERN_ERR
-		       "comedi: "
-		       "failed to create sysfs attribute file \"%s\".\n",
-		       dev_attr_max_read_buffer_kb.attr.name);
-		comedi_free_board_minor(i);
-		return retval;
-	}
-	retval = device_create_file(csdev, &dev_attr_read_buffer_kb);
-	if (retval) {
-		printk(KERN_ERR
-		       "comedi: "
-		       "failed to create sysfs attribute file \"%s\".\n",
-		       dev_attr_read_buffer_kb.attr.name);
-		comedi_free_board_minor(i);
-		return retval;
-	}
-	retval = device_create_file(csdev, &dev_attr_max_write_buffer_kb);
-	if (retval) {
-		printk(KERN_ERR
-		       "comedi: "
-		       "failed to create sysfs attribute file \"%s\".\n",
-		       dev_attr_max_write_buffer_kb.attr.name);
-		comedi_free_board_minor(i);
-		return retval;
-	}
-	retval = device_create_file(csdev, &dev_attr_write_buffer_kb);
-	if (retval) {
-		printk(KERN_ERR
-		       "comedi: "
-		       "failed to create sysfs attribute file \"%s\".\n",
-		       dev_attr_write_buffer_kb.attr.name);
-		comedi_free_board_minor(i);
-		return retval;
-	}
+
 	return i;
 }

 void comedi_free_board_minor(unsigned minor)
 {
-	unsigned long flags;
 	struct comedi_device_file_info *info;

 	BUG_ON(minor >= COMEDI_NUM_BOARD_MINORS);
-	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock(&comedi_file_info_table_lock);
 	info = comedi_file_info_table[minor];
 	comedi_file_info_table[minor] = NULL;
-	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock(&comedi_file_info_table_lock);

 	if (info) {
 		struct comedi_device *dev = info->device;
@ -2294,14 +2548,29 @@ void comedi_free_board_minor(unsigned minor)
 	}
 }

+int comedi_find_board_minor(struct device *hardware_device)
+{
+	int minor;
+	struct comedi_device_file_info *info;
+
+	for (minor = 0; minor < COMEDI_NUM_BOARD_MINORS; minor++) {
+		spin_lock(&comedi_file_info_table_lock);
+		info = comedi_file_info_table[minor];
+		if (info && info->hardware_device == hardware_device) {
+			spin_unlock(&comedi_file_info_table_lock);
+			return minor;
+		}
+		spin_unlock(&comedi_file_info_table_lock);
+	}
+	return -ENODEV;
+}
+
 int comedi_alloc_subdevice_minor(struct comedi_device *dev,
 				 struct comedi_subdevice *s)
 {
-	unsigned long flags;
 	struct comedi_device_file_info *info;
 	struct device *csdev;
 	unsigned i;
-	int retval;

 	info = kmalloc(sizeof(struct comedi_device_file_info), GFP_KERNEL);
 	if (info == NULL)
@ -2309,14 +2578,14 @@ int comedi_alloc_subdevice_minor(struct comedi_device *dev,
 	info->device = dev;
 	info->read_subdevice = s;
 	info->write_subdevice = s;
-	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock(&comedi_file_info_table_lock);
 	for (i = COMEDI_FIRST_SUBDEVICE_MINOR; i < COMEDI_NUM_MINORS; ++i) {
 		if (comedi_file_info_table[i] == NULL) {
 			comedi_file_info_table[i] = info;
 			break;
 		}
 	}
-	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock(&comedi_file_info_table_lock);
 	if (i == COMEDI_NUM_MINORS) {
 		kfree(info);
 		printk(KERN_ERR
@ -2331,48 +2600,12 @@ int comedi_alloc_subdevice_minor(struct comedi_device *dev,
 	if (!IS_ERR(csdev))
 		s->class_dev = csdev;
 	dev_set_drvdata(csdev, info);
-	retval = device_create_file(csdev, &dev_attr_max_read_buffer_kb);
-	if (retval) {
-		printk(KERN_ERR
-		       "comedi: "
-		       "failed to create sysfs attribute file \"%s\".\n",
-		       dev_attr_max_read_buffer_kb.attr.name);
-		comedi_free_subdevice_minor(s);
-		return retval;
-	}
-	retval = device_create_file(csdev, &dev_attr_read_buffer_kb);
-	if (retval) {
-		printk(KERN_ERR
-		       "comedi: "
-		       "failed to create sysfs attribute file \"%s\".\n",
-		       dev_attr_read_buffer_kb.attr.name);
-		comedi_free_subdevice_minor(s);
-		return retval;
-	}
-	retval = device_create_file(csdev, &dev_attr_max_write_buffer_kb);
-	if (retval) {
-		printk(KERN_ERR
-		       "comedi: "
-		       "failed to create sysfs attribute file \"%s\".\n",
-		       dev_attr_max_write_buffer_kb.attr.name);
-		comedi_free_subdevice_minor(s);
-		return retval;
-	}
-	retval = device_create_file(csdev, &dev_attr_write_buffer_kb);
-	if (retval) {
-		printk(KERN_ERR
-		       "comedi: "
-		       "failed to create sysfs attribute file \"%s\".\n",
-		       dev_attr_write_buffer_kb.attr.name);
-		comedi_free_subdevice_minor(s);
-		return retval;
-	}
+
 	return i;
 }

 void comedi_free_subdevice_minor(struct comedi_subdevice *s)
 {
-	unsigned long flags;
 	struct comedi_device_file_info *info;

 	if (s == NULL)
@ -2383,10 +2616,10 @@ void comedi_free_subdevice_minor(struct comedi_subdevice *s)
 	BUG_ON(s->minor >= COMEDI_NUM_MINORS);
 	BUG_ON(s->minor < COMEDI_FIRST_SUBDEVICE_MINOR);

-	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock(&comedi_file_info_table_lock);
 	info = comedi_file_info_table[s->minor];
 	comedi_file_info_table[s->minor] = NULL;
-	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock(&comedi_file_info_table_lock);

 	if (s->class_dev) {
 		device_destroy(comedi_class, MKDEV(COMEDI_MAJOR, s->minor));
@ -2397,310 +2630,12 @@ void comedi_free_subdevice_minor(struct comedi_subdevice *s)

 struct comedi_device_file_info *comedi_get_device_file_info(unsigned minor)
 {
-	unsigned long flags;
 	struct comedi_device_file_info *info;

 	BUG_ON(minor >= COMEDI_NUM_MINORS);
-	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock(&comedi_file_info_table_lock);
 	info = comedi_file_info_table[minor];
-	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock(&comedi_file_info_table_lock);
 	return info;
 }
 EXPORT_SYMBOL_GPL(comedi_get_device_file_info);
-
-static int resize_async_buffer(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_async *async, unsigned new_size)
-{
-	int retval;
-
-	if (new_size > async->max_bufsize)
-		return -EPERM;
-
-	if (s->busy) {
-		DPRINTK("subdevice is busy, cannot resize buffer\n");
-		return -EBUSY;
-	}
-	if (async->mmap_count) {
-		DPRINTK("subdevice is mmapped, cannot resize buffer\n");
-		return -EBUSY;
-	}
-
-	if (!async->prealloc_buf)
-		return -EINVAL;
-
-	/* make sure buffer is an integral number of pages
-	 * (we round up) */
-	new_size = (new_size + PAGE_SIZE - 1) & PAGE_MASK;
-
-	retval = comedi_buf_alloc(dev, s, new_size);
-	if (retval < 0)
-		return retval;
-
-	if (s->buf_change) {
-		retval = s->buf_change(dev, s, new_size);
-		if (retval < 0)
-			return retval;
-	}
-
-	DPRINTK("comedi%i subd %d buffer resized to %i bytes\n",
-		dev->minor, (int)(s - dev->subdevices), async->prealloc_bufsz);
-	return 0;
-}
-
-/* sysfs attribute files */
-
-static const unsigned bytes_per_kibi = 1024;
-
-static ssize_t show_max_read_buffer_kb(struct device *dev,
-				       struct device_attribute *attr, char *buf)
-{
-	ssize_t retval;
-	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned max_buffer_size_kb = 0;
-	struct comedi_subdevice *const read_subdevice =
-	    comedi_get_read_subdevice(info);
-
-	mutex_lock(&info->device->mutex);
-	if (read_subdevice &&
-	    (read_subdevice->subdev_flags & SDF_CMD_READ) &&
-	    read_subdevice->async) {
-		max_buffer_size_kb = read_subdevice->async->max_bufsize /
-		    bytes_per_kibi;
-	}
-	retval = snprintf(buf, PAGE_SIZE, "%i\n", max_buffer_size_kb);
-	mutex_unlock(&info->device->mutex);
-
-	return retval;
-}
-
-static ssize_t store_max_read_buffer_kb(struct device *dev,
-					struct device_attribute *attr,
-					const char *buf, size_t count)
-{
-	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned int new_max_size_kb;
-	unsigned int new_max_size;
-	int ret;
-	struct comedi_subdevice *const read_subdevice =
-	    comedi_get_read_subdevice(info);
-
-	ret = kstrtouint(buf, 10, &new_max_size_kb);
-	if (ret)
-		return ret;
-	if (new_max_size_kb > (UINT_MAX / bytes_per_kibi))
-		return -EINVAL;
-	new_max_size = new_max_size_kb * bytes_per_kibi;
-
-	mutex_lock(&info->device->mutex);
-	if (read_subdevice == NULL ||
-	    (read_subdevice->subdev_flags & SDF_CMD_READ) == 0 ||
-	    read_subdevice->async == NULL) {
-		mutex_unlock(&info->device->mutex);
-		return -EINVAL;
-	}
-	read_subdevice->async->max_bufsize = new_max_size;
-	mutex_unlock(&info->device->mutex);
-
-	return count;
-}
-
-static struct device_attribute dev_attr_max_read_buffer_kb = {
-	.attr = {
-		 .name = "max_read_buffer_kb",
-		 .mode = S_IRUGO | S_IWUSR},
-	.show = &show_max_read_buffer_kb,
-	.store = &store_max_read_buffer_kb
-};
-
-static ssize_t show_read_buffer_kb(struct device *dev,
-				   struct device_attribute *attr, char *buf)
-{
-	ssize_t retval;
-	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned buffer_size_kb = 0;
-	struct comedi_subdevice *const read_subdevice =
-	    comedi_get_read_subdevice(info);
-
-	mutex_lock(&info->device->mutex);
-	if (read_subdevice &&
-	    (read_subdevice->subdev_flags & SDF_CMD_READ) &&
-	    read_subdevice->async) {
-		buffer_size_kb = read_subdevice->async->prealloc_bufsz /
-		    bytes_per_kibi;
-	}
-	retval = snprintf(buf, PAGE_SIZE, "%i\n", buffer_size_kb);
-	mutex_unlock(&info->device->mutex);
-
-	return retval;
-}
-
-static ssize_t store_read_buffer_kb(struct device *dev,
-				    struct device_attribute *attr,
-				    const char *buf, size_t count)
-{
-	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned int new_size_kb;
-	unsigned int new_size;
-	int retval;
-	int ret;
-	struct comedi_subdevice *const read_subdevice =
-	    comedi_get_read_subdevice(info);
-
-	ret = kstrtouint(buf, 10, &new_size_kb);
-	if (ret)
-		return ret;
-	if (new_size_kb > (UINT_MAX / bytes_per_kibi))
-		return -EINVAL;
-	new_size = new_size_kb * bytes_per_kibi;
-
-	mutex_lock(&info->device->mutex);
-	if (read_subdevice == NULL ||
-	    (read_subdevice->subdev_flags & SDF_CMD_READ) == 0 ||
-	    read_subdevice->async == NULL) {
-		mutex_unlock(&info->device->mutex);
-		return -EINVAL;
-	}
-	retval = resize_async_buffer(info->device, read_subdevice,
-				     read_subdevice->async, new_size);
-	mutex_unlock(&info->device->mutex);
-
-	if (retval < 0)
-		return retval;
-	return count;
-}
-
-static struct device_attribute dev_attr_read_buffer_kb = {
-	.attr = {
-		 .name = "read_buffer_kb",
-		 .mode = S_IRUGO | S_IWUSR | S_IWGRP},
-	.show = &show_read_buffer_kb,
-	.store = &store_read_buffer_kb
-};
-
-static ssize_t show_max_write_buffer_kb(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
-{
-	ssize_t retval;
-	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned max_buffer_size_kb = 0;
-	struct comedi_subdevice *const write_subdevice =
-	    comedi_get_write_subdevice(info);
-
-	mutex_lock(&info->device->mutex);
-	if (write_subdevice &&
-	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) &&
-	    write_subdevice->async) {
-		max_buffer_size_kb = write_subdevice->async->max_bufsize /
-		    bytes_per_kibi;
-	}
-	retval = snprintf(buf, PAGE_SIZE, "%i\n", max_buffer_size_kb);
-	mutex_unlock(&info->device->mutex);
-
-	return retval;
-}
-
-static ssize_t store_max_write_buffer_kb(struct device *dev,
-					 struct device_attribute *attr,
-					 const char *buf, size_t count)
-{
-	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned int new_max_size_kb;
-	unsigned int new_max_size;
-	int ret;
-	struct comedi_subdevice *const write_subdevice =
-	    comedi_get_write_subdevice(info);
-
-	ret = kstrtouint(buf, 10, &new_max_size_kb);
-	if (ret)
-		return ret;
-	if (new_max_size_kb > (UINT_MAX / bytes_per_kibi))
-		return -EINVAL;
-	new_max_size = new_max_size_kb * bytes_per_kibi;
-
-	mutex_lock(&info->device->mutex);
-	if (write_subdevice == NULL ||
-	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) == 0 ||
-	    write_subdevice->async == NULL) {
-		mutex_unlock(&info->device->mutex);
-		return -EINVAL;
-	}
-	write_subdevice->async->max_bufsize = new_max_size;
-	mutex_unlock(&info->device->mutex);
-
-	return count;
-}
-
-static struct device_attribute dev_attr_max_write_buffer_kb = {
-	.attr = {
-		 .name = "max_write_buffer_kb",
-		 .mode = S_IRUGO | S_IWUSR},
-	.show = &show_max_write_buffer_kb,
-	.store = &store_max_write_buffer_kb
-};
-
-static ssize_t show_write_buffer_kb(struct device *dev,
-				    struct device_attribute *attr, char *buf)
-{
-	ssize_t retval;
-	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned buffer_size_kb = 0;
-	struct comedi_subdevice *const write_subdevice =
-	    comedi_get_write_subdevice(info);
-
-	mutex_lock(&info->device->mutex);
-	if (write_subdevice &&
-	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) &&
-	    write_subdevice->async) {
-		buffer_size_kb = write_subdevice->async->prealloc_bufsz /
-		    bytes_per_kibi;
-	}
-	retval = snprintf(buf, PAGE_SIZE, "%i\n", buffer_size_kb);
-	mutex_unlock(&info->device->mutex);
-
-	return retval;
-}
-
-static ssize_t store_write_buffer_kb(struct device *dev,
-				     struct device_attribute *attr,
-				     const char *buf, size_t count)
-{
-	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned int new_size_kb;
-	unsigned int new_size;
-	int retval;
-	int ret;
-	struct comedi_subdevice *const write_subdevice =
-	    comedi_get_write_subdevice(info);
-
-	ret = kstrtouint(buf, 10, &new_size_kb);
-	if (ret)
-		return ret;
-	if (new_size_kb > (UINT_MAX / bytes_per_kibi))
-		return -EINVAL;
-	new_size = ((uint64_t) new_size_kb) * bytes_per_kibi;
-
-	mutex_lock(&info->device->mutex);
-	if (write_subdevice == NULL ||
-	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) == 0 ||
-	    write_subdevice->async == NULL) {
-		mutex_unlock(&info->device->mutex);
-		return -EINVAL;
-	}
-	retval = resize_async_buffer(info->device, write_subdevice,
-				     write_subdevice->async, new_size);
-	mutex_unlock(&info->device->mutex);
-
-	if (retval < 0)
-		return retval;
-	return count;
-}
-
-static struct device_attribute dev_attr_write_buffer_kb = {
-	.attr = {
-		 .name = "write_buffer_kb",
-		 .mode = S_IRUGO | S_IWUSR | S_IWGRP},
-	.show = &show_write_buffer_kb,
-	.store = &store_write_buffer_kb
-};
--- a/drivers/staging/comedi/comedidev.h
+++ b/drivers/staging/comedi/comedidev.h
@ -180,13 +180,18 @@ struct comedi_async {
 			unsigned int x);
 };

+struct pci_dev;
+struct usb_interface;
+
 struct comedi_driver {
 	struct comedi_driver *next;

 	const char *driver_name;
 	struct module *module;
 	int (*attach) (struct comedi_device *, struct comedi_devconfig *);
-	int (*detach) (struct comedi_device *);
+	void (*detach) (struct comedi_device *);
+	int (*attach_pci) (struct comedi_device *, struct pci_dev *);
+	int (*attach_usb) (struct comedi_device *, struct usb_interface *);

 	/* number of elements in board_name and board_id arrays */
 	unsigned int num_names;
@ -230,10 +235,16 @@ struct comedi_device {
 	void (*close) (struct comedi_device *dev);
 };

+static inline const void *comedi_board(struct comedi_device *dev)
+{
+	return dev->board_ptr;
+}
+
 struct comedi_device_file_info {
 	struct comedi_device *device;
 	struct comedi_subdevice *read_subdevice;
 	struct comedi_subdevice *write_subdevice;
+	struct device *hardware_device;
 };

 #ifdef CONFIG_COMEDI_DEBUG
@ -287,6 +298,56 @@ int comedi_device_attach(struct comedi_device *dev,
 int comedi_driver_register(struct comedi_driver *);
 int comedi_driver_unregister(struct comedi_driver *);

+/**
+ * module_comedi_driver() - Helper macro for registering a comedi driver
+ * @__comedi_driver: comedi_driver struct
+ *
+ * Helper macro for comedi drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only use
+ * this macro once, and calling it replaces module_init() and module_exit().
+ */
+#define module_comedi_driver(__comedi_driver) \
+	module_driver(__comedi_driver, comedi_driver_register, \
+			comedi_driver_unregister)
+
+struct pci_driver;
+
+int comedi_pci_driver_register(struct comedi_driver *, struct pci_driver *);
+void comedi_pci_driver_unregister(struct comedi_driver *, struct pci_driver *);
+
+/**
+ * module_comedi_pci_driver() - Helper macro for registering a comedi PCI driver
+ * @__comedi_driver: comedi_driver struct
+ * @__pci_driver: pci_driver struct
+ *
+ * Helper macro for comedi PCI drivers which do not do anything special
+ * in module init/exit. This eliminates a lot of boilerplate. Each
+ * module may only use this macro once, and calling it replaces
+ * module_init() and module_exit()
+ */
+#define module_comedi_pci_driver(__comedi_driver, __pci_driver) \
+	module_driver(__comedi_driver, comedi_pci_driver_register, \
+			comedi_pci_driver_unregister, &(__pci_driver))
+
+struct usb_driver;
+
+int comedi_usb_driver_register(struct comedi_driver *, struct usb_driver *);
+void comedi_usb_driver_unregister(struct comedi_driver *, struct usb_driver *);
+
+/**
+ * module_comedi_usb_driver() - Helper macro for registering a comedi USB driver
+ * @__comedi_driver: comedi_driver struct
+ * @__usb_driver: usb_driver struct
+ *
+ * Helper macro for comedi USB drivers which do not do anything special
+ * in module init/exit. This eliminates a lot of boilerplate. Each
+ * module may only use this macro once, and calling it replaces
+ * module_init() and module_exit()
+ */
+#define module_comedi_usb_driver(__comedi_driver, __usb_driver) \
+	module_driver(__comedi_driver, comedi_usb_driver_register, \
+			comedi_usb_driver_unregister, &(__usb_driver))
+
 void init_polling(void);
 void cleanup_polling(void);
 void start_polling(struct comedi_device *);
@ -456,11 +517,12 @@ static inline void *comedi_aux_data(int options[], int n)
 int comedi_alloc_subdevice_minor(struct comedi_device *dev,
 				 struct comedi_subdevice *s);
 void comedi_free_subdevice_minor(struct comedi_subdevice *s);
-int comedi_pci_auto_config(struct pci_dev *pcidev, const char *board_name);
+int comedi_pci_auto_config(struct pci_dev *pcidev,
+			   struct comedi_driver *driver);
 void comedi_pci_auto_unconfig(struct pci_dev *pcidev);
-struct usb_device;		/* forward declaration */
-int comedi_usb_auto_config(struct usb_device *usbdev, const char *board_name);
-void comedi_usb_auto_unconfig(struct usb_device *usbdev);
+int comedi_usb_auto_config(struct usb_interface *intf,
+			   struct comedi_driver *driver);
+void comedi_usb_auto_unconfig(struct usb_interface *intf);

 #ifdef CONFIG_COMEDI_PCI_DRIVERS
 #define CONFIG_COMEDI_PCI
--- a/drivers/staging/comedi/drivers.c
+++ b/drivers/staging/comedi/drivers.c
@ -106,6 +106,26 @@ void comedi_device_detach(struct comedi_device *dev)
 	__comedi_device_detach(dev);
 }

+/* do a little post-config cleanup */
+/* called with module refcount incremented, decrements it */
+static int comedi_device_postconfig(struct comedi_device *dev)
+{
+	int ret = postconfig(dev);
+	module_put(dev->driver->module);
+	if (ret < 0) {
+		__comedi_device_detach(dev);
+		return ret;
+	}
+	if (!dev->board_name) {
+		printk(KERN_WARNING "BUG: dev->board_name=<%p>\n",
+		       dev->board_name);
+		dev->board_name = "BUG";
+	}
+	smp_wmb();
+	dev->attached = 1;
+	return 0;
+}
+
 int comedi_device_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_driver *driv;
@ -121,59 +141,36 @@ int comedi_device_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		}
 		if (driv->num_names) {
 			dev->board_ptr = comedi_recognize(driv, it->board_name);
-			if (dev->board_ptr == NULL) {
-				module_put(driv->module);
-				continue;
-			}
-		} else {
-			if (strcmp(driv->driver_name, it->board_name)) {
-				module_put(driv->module);
-				continue;
-			}
-		}
-		/* initialize dev->driver here so
-		 * comedi_error() can be called from attach */
-		dev->driver = driv;
-		ret = driv->attach(dev, it);
-		if (ret < 0) {
-			module_put(dev->driver->module);
-			__comedi_device_detach(dev);
-			return ret;
-		}
-		goto attached;
-	}
-
-	/*  recognize has failed if we get here */
-	/*  report valid board names before returning error */
-	for (driv = comedi_drivers; driv; driv = driv->next) {
-		if (!try_module_get(driv->module)) {
-			printk(KERN_INFO
-			       "comedi: failed to increment module count\n");
-			continue;
-		}
-		comedi_report_boards(driv);
+			if (dev->board_ptr)
+				break;
+		} else if (strcmp(driv->driver_name, it->board_name))
+			break;
 		module_put(driv->module);
 	}
-	return -EIO;
-
-attached:
-	/* do a little post-config cleanup */
-	ret = postconfig(dev);
-	module_put(dev->driver->module);
+	if (driv == NULL) {
+		/*  recognize has failed if we get here */
+		/*  report valid board names before returning error */
+		for (driv = comedi_drivers; driv; driv = driv->next) {
+			if (!try_module_get(driv->module)) {
+				printk(KERN_INFO
+				       "comedi: failed to increment module count\n");
+				continue;
+			}
+			comedi_report_boards(driv);
+			module_put(driv->module);
+		}
+		return -EIO;
+	}
+	/* initialize dev->driver here so
+	 * comedi_error() can be called from attach */
+	dev->driver = driv;
+	ret = driv->attach(dev, it);
 	if (ret < 0) {
+		module_put(dev->driver->module);
 		__comedi_device_detach(dev);
 		return ret;
 	}
-
-	if (!dev->board_name) {
-		printk(KERN_WARNING "BUG: dev->board_name=<%p>\n",
-		       dev->board_name);
-		dev->board_name = "BUG";
-	}
-	smp_wmb();
-	dev->attached = 1;
-
-	return 0;
+	return comedi_device_postconfig(dev);
 }

 int comedi_driver_register(struct comedi_driver *driver)
@ -242,6 +239,8 @@ static int postconfig(struct comedi_device *dev)
 			s->len_chanlist = 1;

 		if (s->do_cmd) {
+			unsigned int buf_size;
+
 			BUG_ON((s->subdev_flags & (SDF_CMD_READ |
 						   SDF_CMD_WRITE)) == 0);
 			BUG_ON(!s->do_cmdtest);
@ -257,19 +256,20 @@ static int postconfig(struct comedi_device *dev)
 			async->subdevice = s;
 			s->async = async;

-#define DEFAULT_BUF_MAXSIZE (64*1024)
-#define DEFAULT_BUF_SIZE (64*1024)
-
-			async->max_bufsize = DEFAULT_BUF_MAXSIZE;
+			async->max_bufsize =
+				comedi_default_buf_maxsize_kb * 1024;
+			buf_size = comedi_default_buf_size_kb * 1024;
+			if (buf_size > async->max_bufsize)
+				buf_size = async->max_bufsize;

 			async->prealloc_buf = NULL;
 			async->prealloc_bufsz = 0;
-			if (comedi_buf_alloc(dev, s, DEFAULT_BUF_SIZE) < 0) {
+			if (comedi_buf_alloc(dev, s, buf_size) < 0) {
 				printk(KERN_INFO "Buffer allocation failed\n");
 				return -ENOMEM;
 			}
 			if (s->buf_change) {
-				ret = s->buf_change(dev, s, DEFAULT_BUF_SIZE);
+				ret = s->buf_change(dev, s, buf_size);
 				if (ret < 0)
 					return ret;
 			}
@ -814,67 +814,102 @@ void comedi_reset_async_buf(struct comedi_async *async)
 	async->events = 0;
 }

-static int comedi_auto_config(struct device *hardware_device,
-			      const char *board_name, const int *options,
-			      unsigned num_options)
+static int
+comedi_auto_config_helper(struct device *hardware_device,
+			  struct comedi_driver *driver,
+			  int (*attach_wrapper) (struct comedi_device *,
+						 void *), void *context)
 {
-	struct comedi_devconfig it;
 	int minor;
 	struct comedi_device_file_info *dev_file_info;
-	int retval;
-	unsigned *private_data = NULL;
+	struct comedi_device *comedi_dev;
+	int ret;

-	if (!comedi_autoconfig) {
-		dev_set_drvdata(hardware_device, NULL);
+	if (!comedi_autoconfig)
 		return 0;
-	}

 	minor = comedi_alloc_board_minor(hardware_device);
 	if (minor < 0)
 		return minor;

-	private_data = kmalloc(sizeof(unsigned), GFP_KERNEL);
-	if (private_data == NULL) {
-		retval = -ENOMEM;
-		goto cleanup;
-	}
-	*private_data = minor;
-	dev_set_drvdata(hardware_device, private_data);
-
 	dev_file_info = comedi_get_device_file_info(minor);
+	comedi_dev = dev_file_info->device;
+
+	mutex_lock(&comedi_dev->mutex);
+	if (comedi_dev->attached)
+		ret = -EBUSY;
+	else if (!try_module_get(driver->module)) {
+		printk(KERN_INFO "comedi: failed to increment module count\n");
+		ret = -EIO;
+	} else {
+		/* set comedi_dev->driver here for attach wrapper */
+		comedi_dev->driver = driver;
+		ret = (*attach_wrapper)(comedi_dev, context);
+		if (ret < 0) {
+			module_put(driver->module);
+			__comedi_device_detach(comedi_dev);
+		} else {
+			ret = comedi_device_postconfig(comedi_dev);
+		}
+	}
+	mutex_unlock(&comedi_dev->mutex);
+
+	if (ret < 0)
+		comedi_free_board_minor(minor);
+	return ret;
+}
+
+static int comedi_auto_config_wrapper(struct comedi_device *dev, void *context)
+{
+	struct comedi_devconfig *it = context;
+	struct comedi_driver *driv = dev->driver;
+
+	if (driv->num_names) {
+		/* look for generic board entry matching driver name, which
+		 * has already been copied to it->board_name */
+		dev->board_ptr = comedi_recognize(driv, it->board_name);
+		if (dev->board_ptr == NULL) {
+			printk(KERN_WARNING
+			       "comedi: auto config failed to find board entry"
+			       " '%s' for driver '%s'\n", it->board_name,
+			       driv->driver_name);
+			comedi_report_boards(driv);
+			return -EINVAL;
+		}
+	}
+	return driv->attach(dev, it);
+}
+
+static int comedi_auto_config(struct device *hardware_device,
+			      struct comedi_driver *driver, const int *options,
+			      unsigned num_options)
+{
+	struct comedi_devconfig it;

 	memset(&it, 0, sizeof(it));
-	strncpy(it.board_name, board_name, COMEDI_NAMELEN);
+	strncpy(it.board_name, driver->driver_name, COMEDI_NAMELEN);
 	it.board_name[COMEDI_NAMELEN - 1] = '\0';
 	BUG_ON(num_options > COMEDI_NDEVCONFOPTS);
 	memcpy(it.options, options, num_options * sizeof(int));
-
-	mutex_lock(&dev_file_info->device->mutex);
-	retval = comedi_device_attach(dev_file_info->device, &it);
-	mutex_unlock(&dev_file_info->device->mutex);
-
-cleanup:
-	if (retval < 0) {
-		kfree(private_data);
-		comedi_free_board_minor(minor);
-	}
-	return retval;
+	return comedi_auto_config_helper(hardware_device, driver,
+					 comedi_auto_config_wrapper, &it);
 }

 static void comedi_auto_unconfig(struct device *hardware_device)
 {
-	unsigned *minor = (unsigned *)dev_get_drvdata(hardware_device);
-	if (minor == NULL)
+	int minor;
+
+	if (hardware_device == NULL)
 		return;
-
-	BUG_ON(*minor >= COMEDI_NUM_BOARD_MINORS);
-
-	comedi_free_board_minor(*minor);
-	dev_set_drvdata(hardware_device, NULL);
-	kfree(minor);
+	minor = comedi_find_board_minor(hardware_device);
+	if (minor < 0)
+		return;
+	BUG_ON(minor >= COMEDI_NUM_BOARD_MINORS);
+	comedi_free_board_minor(minor);
 }

-int comedi_pci_auto_config(struct pci_dev *pcidev, const char *board_name)
+static int comedi_old_pci_auto_config(struct pci_dev *pcidev,
+				      struct comedi_driver *driver)
 {
 	int options[2];

@ -883,9 +918,30 @@ int comedi_pci_auto_config(struct pci_dev *pcidev, const char *board_name)
 	/*  pci slot */
 	options[1] = PCI_SLOT(pcidev->devfn);

-	return comedi_auto_config(&pcidev->dev, board_name,
+	return comedi_auto_config(&pcidev->dev, driver,
 				  options, ARRAY_SIZE(options));
 }
+
+static int comedi_pci_attach_wrapper(struct comedi_device *dev, void *pcidev)
+{
+	return dev->driver->attach_pci(dev, pcidev);
+}
+
+static int comedi_new_pci_auto_config(struct pci_dev *pcidev,
+				      struct comedi_driver *driver)
+{
+	return comedi_auto_config_helper(&pcidev->dev, driver,
+					 comedi_pci_attach_wrapper, pcidev);
+}
+
+int comedi_pci_auto_config(struct pci_dev *pcidev, struct comedi_driver *driver)
+{
+
+	if (driver->attach_pci)
+		return comedi_new_pci_auto_config(pcidev, driver);
+	else
+		return comedi_old_pci_auto_config(pcidev, driver);
+}
 EXPORT_SYMBOL_GPL(comedi_pci_auto_config);

 void comedi_pci_auto_unconfig(struct pci_dev *pcidev)
@ -894,16 +950,96 @@ void comedi_pci_auto_unconfig(struct pci_dev *pcidev)
 }
 EXPORT_SYMBOL_GPL(comedi_pci_auto_unconfig);

-int comedi_usb_auto_config(struct usb_device *usbdev, const char *board_name)
+int comedi_pci_driver_register(struct comedi_driver *comedi_driver,
+		struct pci_driver *pci_driver)
 {
-	BUG_ON(usbdev == NULL);
-	return comedi_auto_config(&usbdev->dev, board_name, NULL, 0);
+	int ret;
+
+	ret = comedi_driver_register(comedi_driver);
+	if (ret < 0)
+		return ret;
+
+	/* FIXME: Remove this test after auditing all comedi pci drivers */
+	if (!pci_driver->name)
+		pci_driver->name = comedi_driver->driver_name;
+
+	ret = pci_register_driver(pci_driver);
+	if (ret < 0) {
+		comedi_driver_unregister(comedi_driver);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(comedi_pci_driver_register);
+
+void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver,
+		struct pci_driver *pci_driver)
+{
+	pci_unregister_driver(pci_driver);
+	comedi_driver_unregister(comedi_driver);
+}
+EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister);
+
+static int comedi_old_usb_auto_config(struct usb_interface *intf,
+				      struct comedi_driver *driver)
+{
+	return comedi_auto_config(&intf->dev, driver, NULL, 0);
+}
+
+static int comedi_usb_attach_wrapper(struct comedi_device *dev, void *intf)
+{
+	return dev->driver->attach_usb(dev, intf);
+}
+
+static int comedi_new_usb_auto_config(struct usb_interface *intf,
+				      struct comedi_driver *driver)
+{
+	return comedi_auto_config_helper(&intf->dev, driver,
+					 comedi_usb_attach_wrapper, intf);
+}
+
+int comedi_usb_auto_config(struct usb_interface *intf,
+			   struct comedi_driver *driver)
+{
+	BUG_ON(intf == NULL);
+	if (driver->attach_usb)
+		return comedi_new_usb_auto_config(intf, driver);
+	else
+		return comedi_old_usb_auto_config(intf, driver);
 }
 EXPORT_SYMBOL_GPL(comedi_usb_auto_config);

-void comedi_usb_auto_unconfig(struct usb_device *usbdev)
+void comedi_usb_auto_unconfig(struct usb_interface *intf)
 {
-	BUG_ON(usbdev == NULL);
-	comedi_auto_unconfig(&usbdev->dev);
+	BUG_ON(intf == NULL);
+	comedi_auto_unconfig(&intf->dev);
 }
 EXPORT_SYMBOL_GPL(comedi_usb_auto_unconfig);
+
+int comedi_usb_driver_register(struct comedi_driver *comedi_driver,
+		struct usb_driver *usb_driver)
+{
+	int ret;
+
+	ret = comedi_driver_register(comedi_driver);
+	if (ret < 0)
+		return ret;
+
+	ret = usb_register(usb_driver);
+	if (ret < 0) {
+		comedi_driver_unregister(comedi_driver);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(comedi_usb_driver_register);
+
+void comedi_usb_driver_unregister(struct comedi_driver *comedi_driver,
+		struct usb_driver *usb_driver)
+{
+	usb_deregister(usb_driver);
+	comedi_driver_unregister(comedi_driver);
+}
+EXPORT_SYMBOL_GPL(comedi_usb_driver_unregister);
--- a/drivers/staging/comedi/drivers/8255.c
+++ b/drivers/staging/comedi/drivers/8255.c
@ -107,31 +107,6 @@ struct subdev_8255_struct {
 #define CALLBACK_FUNC	(((struct subdev_8255_struct *)s->private)->cb_func)
 #define subdevpriv	((struct subdev_8255_struct *)s->private)

-static int dev_8255_attach(struct comedi_device *dev,
-			   struct comedi_devconfig *it);
-static int dev_8255_detach(struct comedi_device *dev);
-static struct comedi_driver driver_8255 = {
-	.driver_name = "8255",
-	.module = THIS_MODULE,
-	.attach = dev_8255_attach,
-	.detach = dev_8255_detach,
-};
-
-static int __init driver_8255_init_module(void)
-{
-	return comedi_driver_register(&driver_8255);
-}
-
-static void __exit driver_8255_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_8255);
-}
-
-module_init(driver_8255_init_module);
-module_exit(driver_8255_cleanup_module);
-
-static void do_config(struct comedi_device *dev, struct comedi_subdevice *s);
-
 void subdev_8255_interrupt(struct comedi_device *dev,
 			   struct comedi_subdevice *s)
 {
@ -185,6 +160,23 @@ static int subdev_8255_insn(struct comedi_device *dev,
 	return 2;
 }

+static void do_config(struct comedi_device *dev, struct comedi_subdevice *s)
+{
+	int config;
+
+	config = CR_CW;
+	/* 1 in io_bits indicates output, 1 in config indicates input */
+	if (!(s->io_bits & 0x0000ff))
+		config |= CR_A_IO;
+	if (!(s->io_bits & 0x00ff00))
+		config |= CR_B_IO;
+	if (!(s->io_bits & 0x0f0000))
+		config |= CR_C_LO_IO;
+	if (!(s->io_bits & 0xf00000))
+		config |= CR_C_HI_IO;
+	CALLBACK_FUNC(1, _8255_CR, config, CALLBACK_ARG);
+}
+
 static int subdev_8255_insn_config(struct comedi_device *dev,
 				   struct comedi_subdevice *s,
 				   struct comedi_insn *insn, unsigned int *data)
@ -222,23 +214,6 @@ static int subdev_8255_insn_config(struct comedi_device *dev,
 	return 1;
 }

-static void do_config(struct comedi_device *dev, struct comedi_subdevice *s)
-{
-	int config;
-
-	config = CR_CW;
-	/* 1 in io_bits indicates output, 1 in config indicates input */
-	if (!(s->io_bits & 0x0000ff))
-		config |= CR_A_IO;
-	if (!(s->io_bits & 0x00ff00))
-		config |= CR_B_IO;
-	if (!(s->io_bits & 0x0f0000))
-		config |= CR_C_LO_IO;
-	if (!(s->io_bits & 0xf00000))
-		config |= CR_C_HI_IO;
-	CALLBACK_FUNC(1, _8255_CR, config, CALLBACK_ARG);
-}
-
 static int subdev_8255_cmdtest(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
 			       struct comedi_cmd *cmd)
@ -442,14 +417,12 @@ static int dev_8255_attach(struct comedi_device *dev,
 	return 0;
 }

-static int dev_8255_detach(struct comedi_device *dev)
+static void dev_8255_detach(struct comedi_device *dev)
 {
 	int i;
 	unsigned long iobase;
 	struct comedi_subdevice *s;

-	printk(KERN_INFO "comedi%d: 8255: remove\n", dev->minor);
-
 	for (i = 0; i < dev->n_subdevices; i++) {
 		s = dev->subdevices + i;
 		if (s->type != COMEDI_SUBD_UNUSED) {
@ -458,10 +431,16 @@ static int dev_8255_detach(struct comedi_device *dev)
 		}
 		subdev_8255_cleanup(dev, s);
 	}
-
-	return 0;
 }

+static struct comedi_driver dev_8255_driver = {
+	.driver_name	= "8255",
+	.module		= THIS_MODULE,
+	.attach		= dev_8255_attach,
+	.detach		= dev_8255_detach,
+};
+module_comedi_driver(dev_8255_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
--- a/drivers/staging/comedi/drivers/acl7225b.c
+++ b/drivers/staging/comedi/drivers/acl7225b.c
@ -22,46 +22,13 @@ Devices: [Adlink] ACL-7225b (acl7225b), [ICP] P16R16DIO (p16r16dio)
 #define ACL7225_DI_LO  2	/* Digital input low byte (DI0-DI7) */
 #define ACL7225_DI_HI  3	/* Digital input high byte (DI8-DI15) */

-static int acl7225b_attach(struct comedi_device *dev,
-			   struct comedi_devconfig *it);
-static int acl7225b_detach(struct comedi_device *dev);
-
 struct boardtype {
 	const char *name;	/*  driver name */
 	int io_range;		/*  len of I/O space */
 };

-static const struct boardtype boardtypes[] = {
-	{"acl7225b", ACL7225_SIZE,},
-	{"p16r16dio", P16R16DIO_SIZE,},
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct boardtype))
 #define this_board ((const struct boardtype *)dev->board_ptr)

-static struct comedi_driver driver_acl7225b = {
-	.driver_name = "acl7225b",
-	.module = THIS_MODULE,
-	.attach = acl7225b_attach,
-	.detach = acl7225b_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct boardtype),
-};
-
-static int __init driver_acl7225b_init_module(void)
-{
-	return comedi_driver_register(&driver_acl7225b);
-}
-
-static void __exit driver_acl7225b_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_acl7225b);
-}
-
-module_init(driver_acl7225b_init_module);
-module_exit(driver_acl7225b_cleanup_module);
-
 static int acl7225b_do_insn(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data)
@ -152,16 +119,28 @@ static int acl7225b_attach(struct comedi_device *dev,
 	return 0;
 }

-static int acl7225b_detach(struct comedi_device *dev)
+static void acl7225b_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: acl7225b: remove\n", dev->minor);
-
 	if (dev->iobase)
 		release_region(dev->iobase, this_board->io_range);
-
-	return 0;
 }

+static const struct boardtype boardtypes[] = {
+	{ "acl7225b", ACL7225_SIZE, },
+	{ "p16r16dio", P16R16DIO_SIZE, },
+};
+
+static struct comedi_driver acl7225b_driver = {
+	.driver_name	= "acl7225b",
+	.module		= THIS_MODULE,
+	.attach		= acl7225b_attach,
+	.detach		= acl7225b_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct boardtype),
+};
+module_comedi_driver(acl7225b_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.h
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.h
@ -94,111 +94,72 @@ struct addi_board {
 	unsigned int ui_MinDelaytimeNs;	/*  Minimum Delay in Nano secs */

 	/* interrupt and reset */
-	void (*v_hwdrv_Interrupt)(int irq, void *d);
-	int (*i_hwdrv_Reset)(struct comedi_device *dev);
+	void (*interrupt)(int irq, void *d);
+	int (*reset)(struct comedi_device *);

 	/* Subdevice functions */

 	/* ANALOG INPUT */
-	int (*i_hwdrv_InsnConfigAnalogInput)(struct comedi_device *dev,
-					     struct comedi_subdevice *s,
-					     struct comedi_insn *insn,
-					     unsigned int *data);
-	int (*i_hwdrv_InsnReadAnalogInput)(struct comedi_device *dev,
-					    struct comedi_subdevice *s,
-					    struct comedi_insn *insn,
-					    unsigned int *data);
-	int (*i_hwdrv_InsnWriteAnalogInput)(struct comedi_device *dev,
-					    struct comedi_subdevice *s,
-					    struct comedi_insn *insn,
-					    unsigned int *data);
-	int (*i_hwdrv_InsnBitsAnalogInput)(struct comedi_device *dev,
-					   struct comedi_subdevice *s,
-					   struct comedi_insn *insn,
-					   unsigned int *data);
-	int (*i_hwdrv_CommandTestAnalogInput)(struct comedi_device *dev,
-					      struct comedi_subdevice *s,
-					      struct comedi_cmd *cmd);
-	int (*i_hwdrv_CommandAnalogInput)(struct comedi_device *dev,
-					  struct comedi_subdevice *s);
-	int (*i_hwdrv_CancelAnalogInput)(struct comedi_device *dev,
-					 struct comedi_subdevice *s);
+	int (*ai_config)(struct comedi_device *, struct comedi_subdevice *,
+			 struct comedi_insn *, unsigned int *);
+	int (*ai_read)(struct comedi_device *, struct comedi_subdevice *,
+		       struct comedi_insn *, unsigned int *);
+	int (*ai_write)(struct comedi_device *, struct comedi_subdevice *,
+			struct comedi_insn *, unsigned int *);
+	int (*ai_bits)(struct comedi_device *, struct comedi_subdevice *,
+		       struct comedi_insn *, unsigned int *);
+	int (*ai_cmdtest)(struct comedi_device *, struct comedi_subdevice *,
+			  struct comedi_cmd *);
+	int (*ai_cmd)(struct comedi_device *, struct comedi_subdevice *);
+	int (*ai_cancel)(struct comedi_device *, struct comedi_subdevice *);

 	/* Analog Output */
-	int (*i_hwdrv_InsnConfigAnalogOutput)(struct comedi_device *dev,
-					      struct comedi_subdevice *s,
-					      struct comedi_insn *insn,
-					      unsigned int *data);
-	int (*i_hwdrv_InsnWriteAnalogOutput)(struct comedi_device *dev,
-					     struct comedi_subdevice *s,
-					     struct comedi_insn *insn,
-					     unsigned int *data);
-	int (*i_hwdrv_InsnBitsAnalogOutput)(struct comedi_device *dev,
-					    struct comedi_subdevice *s,
-					    struct comedi_insn *insn,
-					    unsigned int *data);
+	int (*ao_config)(struct comedi_device *, struct comedi_subdevice *,
+			 struct comedi_insn *, unsigned int *);
+	int (*ao_write)(struct comedi_device *, struct comedi_subdevice *,
+			struct comedi_insn *, unsigned int *);
+	int (*ao_bits)(struct comedi_device *, struct comedi_subdevice *,
+		       struct comedi_insn *, unsigned int *);

 	/* Digital Input */
-	int (*i_hwdrv_InsnConfigDigitalInput) (struct comedi_device *dev,
-					       struct comedi_subdevice *s,
-					       struct comedi_insn *insn,
-					       unsigned int *data);
-	int (*i_hwdrv_InsnReadDigitalInput) (struct comedi_device *dev,
-					     struct comedi_subdevice *s,
-					     struct comedi_insn *insn,
-					     unsigned int *data);
-	int (*i_hwdrv_InsnWriteDigitalInput) (struct comedi_device *dev,
-					      struct comedi_subdevice *s,
-					      struct comedi_insn *insn,
-					      unsigned int *data);
-	int (*i_hwdrv_InsnBitsDigitalInput) (struct comedi_device *dev,
-					     struct comedi_subdevice *s,
-					     struct comedi_insn *insn,
-					     unsigned int *data);
+	int (*di_config)(struct comedi_device *, struct comedi_subdevice *,
+			 struct comedi_insn *, unsigned int *);
+	int (*di_read)(struct comedi_device *, struct comedi_subdevice *,
+		       struct comedi_insn *, unsigned int *);
+	int (*di_write)(struct comedi_device *, struct comedi_subdevice *,
+			struct comedi_insn *, unsigned int *);
+	int (*di_bits)(struct comedi_device *, struct comedi_subdevice *,
+		       struct comedi_insn *, unsigned int *);

 	/* Digital Output */
-	int (*i_hwdrv_InsnConfigDigitalOutput)(struct comedi_device *dev,
-					       struct comedi_subdevice *s,
-					       struct comedi_insn *insn,
-					       unsigned int *data);
-	int (*i_hwdrv_InsnWriteDigitalOutput)(struct comedi_device *dev,
-					      struct comedi_subdevice *s,
-					      struct comedi_insn *insn,
-					      unsigned int *data);
-	int (*i_hwdrv_InsnBitsDigitalOutput)(struct comedi_device *dev,
-					     struct comedi_subdevice *s,
-					     struct comedi_insn *insn,
-					     unsigned int *data);
-	int (*i_hwdrv_InsnReadDigitalOutput)(struct comedi_device *dev,
-					     struct comedi_subdevice *s,
-					     struct comedi_insn *insn,
-					     unsigned int *data);
+	int (*do_config)(struct comedi_device *, struct comedi_subdevice *,
+			 struct comedi_insn *, unsigned int *);
+	int (*do_write)(struct comedi_device *, struct comedi_subdevice *,
+			struct comedi_insn *, unsigned int *);
+	int (*do_bits)(struct comedi_device *, struct comedi_subdevice *,
+		       struct comedi_insn *, unsigned int *);
+	int (*do_read)(struct comedi_device *, struct comedi_subdevice *,
+		       struct comedi_insn *, unsigned int *);

 	/* TIMER */
-	int (*i_hwdrv_InsnConfigTimer)(struct comedi_device *dev,
-				       struct comedi_subdevice *s,
-				       struct comedi_insn *insn, unsigned int *data);
-	int (*i_hwdrv_InsnWriteTimer)(struct comedi_device *dev,
-				      struct comedi_subdevice *s, struct comedi_insn *insn,
-				      unsigned int *data);
-	int (*i_hwdrv_InsnReadTimer)(struct comedi_device *dev, struct comedi_subdevice *s,
-				     struct comedi_insn *insn, unsigned int *data);
-	int (*i_hwdrv_InsnBitsTimer)(struct comedi_device *dev, struct comedi_subdevice *s,
-				     struct comedi_insn *insn, unsigned int *data);
+	int (*timer_config)(struct comedi_device *, struct comedi_subdevice *,
+			    struct comedi_insn *, unsigned int *);
+	int (*timer_write)(struct comedi_device *, struct comedi_subdevice *,
+			   struct comedi_insn *, unsigned int *);
+	int (*timer_read)(struct comedi_device *, struct comedi_subdevice *,
+			  struct comedi_insn *, unsigned int *);
+	int (*timer_bits)(struct comedi_device *, struct comedi_subdevice *,
+			  struct comedi_insn *, unsigned int *);

 	/* TTL IO */
-	int (*i_hwdr_ConfigInitTTLIO)(struct comedi_device *dev,
-				      struct comedi_subdevice *s, struct comedi_insn *insn,
-				      unsigned int *data);
-	int (*i_hwdr_ReadTTLIOBits)(struct comedi_device *dev, struct comedi_subdevice *s,
-				    struct comedi_insn *insn, unsigned int *data);
-	int (*i_hwdr_ReadTTLIOAllPortValue)(struct comedi_device *dev,
-					    struct comedi_subdevice *s,
-					    struct comedi_insn *insn,
-					    unsigned int *data);
-	int (*i_hwdr_WriteTTLIOChlOnOff)(struct comedi_device *dev,
-					 struct comedi_subdevice *s,
-					 struct comedi_insn *insn, unsigned int *data);
+	int (*ttl_config)(struct comedi_device *, struct comedi_subdevice *,
+			  struct comedi_insn *, unsigned int *);
+	int (*ttl_bits)(struct comedi_device *, struct comedi_subdevice *,
+			struct comedi_insn *, unsigned int *);
+	int (*ttl_read)(struct comedi_device *, struct comedi_subdevice *,
+			struct comedi_insn *, unsigned int *);
+	int (*ttl_write)(struct comedi_device *, struct comedi_subdevice *,
+			 struct comedi_insn *, unsigned int *);
 };

 /* MODULE INFO STRUCTURE */
@ -455,7 +416,7 @@ static unsigned short pci_list_builded;	/* set to 1 when list of card is known *

 /* Function declarations */
 static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int i_ADDI_Detach(struct comedi_device *dev);
+static void i_ADDI_Detach(struct comedi_device *dev);
 static int i_ADDI_Reset(struct comedi_device *dev);

 static irqreturn_t v_ADDI_Interrupt(int irq, void *d);
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@ -156,7 +156,7 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device *dev, struct comedi_subd
 	} else
 		us_ConvertTiming = (unsigned short) (devpriv->ui_EocEosConversionTime / 1000);	/*  nano to useconds */

-	/*  this_board->i_hwdrv_InsnReadAnalogInput(dev,us_ConvertTiming,insn->n,&insn->chanspec,data,insn->unused[0]); */
+	/*  this_board->ai_read(dev,us_ConvertTiming,insn->n,&insn->chanspec,data,insn->unused[0]); */

 	/*  Clear software registers */
 	devpriv->b_TimerSelectMode = 0;
@ -670,7 +670,7 @@ int i_APCI3120_CommandAnalogInput(struct comedi_device *dev, struct comedi_subde
 			/*  mode 1 */

 			devpriv->ui_AiTimer0 = cmd->convert_arg;	/*  timer constant in nano seconds */
-			/* return this_board->i_hwdrv_CommandAnalogInput(1,dev,s); */
+			/* return this_board->ai_cmd(1,dev,s); */
 			return i_APCI3120_CyclicAnalogInput(1, dev, s);
 		}

@ -680,7 +680,7 @@ int i_APCI3120_CommandAnalogInput(struct comedi_device *dev, struct comedi_subde
 		/*  mode 2 */
 		devpriv->ui_AiTimer1 = cmd->scan_begin_arg;
 		devpriv->ui_AiTimer0 = cmd->convert_arg;	/*  variable changed timer2 to timer0 */
-		/* return this_board->i_hwdrv_CommandAnalogInput(2,dev,s); */
+		/* return this_board->ai_cmd(2,dev,s); */
 		return i_APCI3120_CyclicAnalogInput(2, dev, s);
 	}
 	return -1;
@ -1922,7 +1922,7 @@ int i_APCI3120_InsnConfigTimer(struct comedi_device *dev, struct comedi_subdevic

 	ui_Timervalue2 = data[1] / 1000;	/*  convert nano seconds  to u seconds */

-	/* this_board->i_hwdrv_InsnConfigTimer(dev, ui_Timervalue2,(unsigned char)data[0]); */
+	/* this_board->timer_config(dev, ui_Timervalue2,(unsigned char)data[0]); */
 	us_TmpValue = (unsigned short) inw(devpriv->iobase + APCI3120_RD_STATUS);

 /*
@ -2092,7 +2092,7 @@ int i_APCI3120_InsnWriteTimer(struct comedi_device *dev, struct comedi_subdevice
 			ui_Timervalue2 = 0;
 	}

-	/* this_board->i_hwdrv_InsnWriteTimer(dev,data[0],ui_Timervalue2); */
+	/* this_board->timer_write(dev,data[0],ui_Timervalue2); */

 	switch (data[0]) {
 	case APCI3120_START:
@ -2260,7 +2260,7 @@ int i_APCI3120_InsnReadTimer(struct comedi_device *dev, struct comedi_subdevice
 		comedi_error(dev, "\nread:timer2  not configured ");
 	}

-	/* this_board->i_hwdrv_InsnReadTimer(dev,data); */
+	/* this_board->timer_read(dev,data); */
 	if (devpriv->b_Timer2Mode == APCI3120_TIMER) {

 		/* Read the LOW unsigned short of Timer 2 register */
@ -2331,7 +2331,7 @@ int i_APCI3120_InsnReadDigitalInput(struct comedi_device *dev,

 	ui_Chan = CR_CHAN(insn->chanspec);	/*  channel specified */

-	/* this_board->i_hwdrv_InsnReadDigitalInput(dev,ui_Chan,data); */
+	/* this_board->di_read(dev,ui_Chan,data); */
 	if (ui_Chan <= 3) {
 		ui_TmpValue = (unsigned int) inw(devpriv->iobase + APCI3120_RD_STATUS);

@ -2379,7 +2379,7 @@ int i_APCI3120_InsnBitsDigitalInput(struct comedi_device *dev, struct comedi_sub
 	*****/

 	*data = (ui_TmpValue >> 8) & 0xf;
-	/* this_board->i_hwdrv_InsnBitsDigitalInput(dev,data); */
+	/* this_board->di_bits(dev,data); */
 	return insn->n;
 }

@ -2595,7 +2595,7 @@ int i_APCI3120_InsnWriteAnalogOutput(struct comedi_device *dev,
 	ui_Range = CR_RANGE(insn->chanspec);
 	ui_Channel = CR_CHAN(insn->chanspec);

-	/* this_board->i_hwdrv_InsnWriteAnalogOutput(dev, ui_Range, ui_Channel,data[0]); */
+	/* this_board->ao_write(dev, ui_Range, ui_Channel,data[0]); */
 	if (ui_Range) {		/*  if 1 then unipolar */

 		if (data[0] != 0)
--- a/drivers/staging/comedi/drivers/adl_pci6208.c
+++ b/drivers/staging/comedi/drivers/adl_pci6208.c
@ -54,8 +54,6 @@ References:
 #include "../comedidev.h"
 #include "comedi_pci.h"

-#define PCI6208_DRIVER_NAME	"adl_pci6208"
-
 /* Board descriptions */
 struct pci6208_board {
 	const char *name;
@ -85,17 +83,6 @@ static const struct pci6208_board pci6208_boards[] = {
 	 }
 };

-/* This is used by modprobe to translate PCI IDs to drivers.  Should
- * only be used for PCI and ISA-PnP devices */
-static DEFINE_PCI_DEVICE_TABLE(pci6208_pci_table) = {
-	/* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
-	/* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, 0x6208) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci6208_pci_table);
-
 /* Will be initialized in pci6208_find device(). */
 #define thisboard ((const struct pci6208_board *)dev->board_ptr)

@ -107,157 +94,6 @@ struct pci6208_private {

 #define devpriv ((struct pci6208_private *)dev->private)

-static int pci6208_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pci6208_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver_pci6208 = {
-	.driver_name = PCI6208_DRIVER_NAME,
-	.module = THIS_MODULE,
-	.attach = pci6208_attach,
-	.detach = pci6208_detach,
-};
-
-static int __devinit driver_pci6208_pci_probe(struct pci_dev *dev,
-					      const struct pci_device_id *ent)
-{
-	return comedi_pci_auto_config(dev, driver_pci6208.driver_name);
-}
-
-static void __devexit driver_pci6208_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver driver_pci6208_pci_driver = {
-	.id_table = pci6208_pci_table,
-	.probe = &driver_pci6208_pci_probe,
-	.remove = __devexit_p(&driver_pci6208_pci_remove)
-};
-
-static int __init driver_pci6208_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_pci6208);
-	if (retval < 0)
-		return retval;
-
-	driver_pci6208_pci_driver.name = (char *)driver_pci6208.driver_name;
-	return pci_register_driver(&driver_pci6208_pci_driver);
-}
-
-static void __exit driver_pci6208_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_pci6208_pci_driver);
-	comedi_driver_unregister(&driver_pci6208);
-}
-
-module_init(driver_pci6208_init_module);
-module_exit(driver_pci6208_cleanup_module);
-
-static int pci6208_find_device(struct comedi_device *dev, int bus, int slot);
-static int
-pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
-		  int dev_minor);
-
-/*read/write functions*/
-static int pci6208_ao_winsn(struct comedi_device *dev,
-			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data);
-static int pci6208_ao_rinsn(struct comedi_device *dev,
-			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data);
-/* static int pci6208_dio_insn_bits (struct comedi_device *dev,
- *					struct comedi_subdevice *s, */
-/* struct comedi_insn *insn,unsigned int *data); */
-/* static int pci6208_dio_insn_config(struct comedi_device *dev,
- *					struct comedi_subdevice *s, */
-/* struct comedi_insn *insn,unsigned int *data); */
-
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
-static int pci6208_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	int retval;
-	unsigned long io_base;
-
-	printk(KERN_INFO "comedi%d: pci6208: ", dev->minor);
-
-	retval = alloc_private(dev, sizeof(struct pci6208_private));
-	if (retval < 0)
-		return retval;
-
-	retval = pci6208_find_device(dev, it->options[0], it->options[1]);
-	if (retval < 0)
-		return retval;
-
-	retval = pci6208_pci_setup(devpriv->pci_dev, &io_base, dev->minor);
-	if (retval < 0)
-		return retval;
-
-	dev->iobase = io_base;
-	dev->board_name = thisboard->name;
-
-/*
- * Allocate the subdevice structures.  alloc_subdevice() is a
- * convenient macro defined in comedidev.h.
- */
-	if (alloc_subdevices(dev, 2) < 0)
-		return -ENOMEM;
-
-	s = dev->subdevices + 0;
-	/* analog output subdevice */
-	s->type = COMEDI_SUBD_AO;
-	s->subdev_flags = SDF_WRITABLE;	/* anything else to add here?? */
-	s->n_chan = thisboard->ao_chans;
-	s->maxdata = 0xffff;	/* 16-bit DAC */
-	s->range_table = &range_bipolar10;	/* this needs to be checked. */
-	s->insn_write = pci6208_ao_winsn;
-	s->insn_read = pci6208_ao_rinsn;
-
-	/* s=dev->subdevices+1; */
-	/* digital i/o subdevice */
-	/* s->type=COMEDI_SUBD_DIO; */
-	/* s->subdev_flags=SDF_READABLE|SDF_WRITABLE; */
-	/* s->n_chan=16; */
-	/* s->maxdata=1; */
-	/* s->range_table=&range_digital; */
-	/* s->insn_bits = pci6208_dio_insn_bits; */
-	/* s->insn_config = pci6208_dio_insn_config; */
-
-	printk(KERN_INFO "attached\n");
-
-	return 1;
-}
-
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int pci6208_detach(struct comedi_device *dev)
-{
-	printk(KERN_INFO "comedi%d: pci6208: remove\n", dev->minor);
-
-	if (devpriv && devpriv->pci_dev) {
-		if (dev->iobase)
-			comedi_pci_disable(devpriv->pci_dev);
-		pci_dev_put(devpriv->pci_dev);
-	}
-
-	return 0;
-}
-
 static int pci6208_ao_winsn(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data)
@ -410,7 +246,7 @@ pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
 	unsigned long io_base, io_range, lcr_io_base, lcr_io_range;

 	/*  Enable PCI device and request regions */
-	if (comedi_pci_enable(pci_dev, PCI6208_DRIVER_NAME) < 0) {
+	if (comedi_pci_enable(pci_dev, "adl_pci6208") < 0) {
 		printk(KERN_ERR "comedi%d: Failed to enable PCI device "
 			"and request regions\n",
 			dev_minor);
@ -442,6 +278,103 @@ pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
 	return 0;
 }

+static int pci6208_attach(struct comedi_device *dev,
+			  struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+	int retval;
+	unsigned long io_base;
+
+	printk(KERN_INFO "comedi%d: pci6208: ", dev->minor);
+
+	retval = alloc_private(dev, sizeof(struct pci6208_private));
+	if (retval < 0)
+		return retval;
+
+	retval = pci6208_find_device(dev, it->options[0], it->options[1]);
+	if (retval < 0)
+		return retval;
+
+	retval = pci6208_pci_setup(devpriv->pci_dev, &io_base, dev->minor);
+	if (retval < 0)
+		return retval;
+
+	dev->iobase = io_base;
+	dev->board_name = thisboard->name;
+
+	if (alloc_subdevices(dev, 2) < 0)
+		return -ENOMEM;
+
+	s = dev->subdevices + 0;
+	/* analog output subdevice */
+	s->type = COMEDI_SUBD_AO;
+	s->subdev_flags = SDF_WRITABLE;	/* anything else to add here?? */
+	s->n_chan = thisboard->ao_chans;
+	s->maxdata = 0xffff;	/* 16-bit DAC */
+	s->range_table = &range_bipolar10;	/* this needs to be checked. */
+	s->insn_write = pci6208_ao_winsn;
+	s->insn_read = pci6208_ao_rinsn;
+
+	/* s=dev->subdevices+1; */
+	/* digital i/o subdevice */
+	/* s->type=COMEDI_SUBD_DIO; */
+	/* s->subdev_flags=SDF_READABLE|SDF_WRITABLE; */
+	/* s->n_chan=16; */
+	/* s->maxdata=1; */
+	/* s->range_table=&range_digital; */
+	/* s->insn_bits = pci6208_dio_insn_bits; */
+	/* s->insn_config = pci6208_dio_insn_config; */
+
+	printk(KERN_INFO "attached\n");
+
+	return 1;
+}
+
+static void pci6208_detach(struct comedi_device *dev)
+{
+	if (devpriv && devpriv->pci_dev) {
+		if (dev->iobase)
+			comedi_pci_disable(devpriv->pci_dev);
+		pci_dev_put(devpriv->pci_dev);
+	}
+}
+
+static struct comedi_driver adl_pci6208_driver = {
+	.driver_name	= "adl_pci6208",
+	.module		= THIS_MODULE,
+	.attach		= pci6208_attach,
+	.detach		= pci6208_detach,
+};
+
+static int __devinit adl_pci6208_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &adl_pci6208_driver);
+}
+
+static void __devexit adl_pci6208_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+/* This is used by modprobe to translate PCI IDs to drivers.  Should
+ * only be used for PCI and ISA-PnP devices */
+static DEFINE_PCI_DEVICE_TABLE(adl_pci6208_pci_table) = {
+	/* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
+	/* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, 0x6208) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, adl_pci6208_pci_table);
+
+static struct pci_driver adl_pci6208_pci_driver = {
+	.name		= "adl_pci6208",
+	.id_table	= adl_pci6208_pci_table,
+	.probe		= adl_pci6208_pci_probe,
+	.remove		= __devexit_p(adl_pci6208_pci_remove),
+};
+module_comedi_pci_driver(adl_pci6208_driver, adl_pci6208_pci_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
--- a/drivers/staging/comedi/drivers/adl_pci7230.c
+++ b/drivers/staging/comedi/drivers/adl_pci7230.c
@ -43,13 +43,6 @@ Configuration Options:

 #define PCI_DEVICE_ID_PCI7230 0x7230

-static DEFINE_PCI_DEVICE_TABLE(adl_pci7230_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7230) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, adl_pci7230_pci_table);
-
 struct adl_pci7230_private {
 	int data;
 	struct pci_dev *pci_dev;
@ -57,27 +50,36 @@ struct adl_pci7230_private {

 #define devpriv ((struct adl_pci7230_private *)dev->private)

-static int adl_pci7230_attach(struct comedi_device *dev,
-	struct comedi_devconfig *it);
-static int adl_pci7230_detach(struct comedi_device *dev);
-static struct comedi_driver driver_adl_pci7230 = {
-	.driver_name = "adl_pci7230",
-	.module = THIS_MODULE,
-	.attach = adl_pci7230_attach,
-	.detach = adl_pci7230_detach,
-};
+static int adl_pci7230_do_insn_bits(struct comedi_device *dev,
+	struct comedi_subdevice *s,
+	struct comedi_insn *insn,
+	unsigned int *data)
+{
+	if (insn->n != 2)
+		return -EINVAL;

-/* Digital IO */
+	if (data[0]) {
+		s->state &= ~data[0];
+		s->state |= (data[0] & data[1]);
+
+		outl((s->state  << 16) & 0xffffffff, dev->iobase + PCI7230_DO);
+	}
+
+	return 2;
+}

 static int adl_pci7230_di_insn_bits(struct comedi_device *dev,
 	struct comedi_subdevice *s,
 	struct comedi_insn *insn,
-	unsigned int *data);
+	unsigned int *data)
+{
+	if (insn->n != 2)
+		return -EINVAL;

-static int adl_pci7230_do_insn_bits(struct comedi_device *dev,
-	struct comedi_subdevice *s,
-	struct comedi_insn *insn,
-	unsigned int *data);
+	data[1] = inl(dev->iobase + PCI7230_DI) & 0xffffffff;
+
+	return 2;
+}

 static int adl_pci7230_attach(struct comedi_device *dev,
 	struct comedi_devconfig *it)
@ -148,89 +150,46 @@ static int adl_pci7230_attach(struct comedi_device *dev,
 	return 1;
 }

-static int adl_pci7230_detach(struct comedi_device *dev)
+static void adl_pci7230_detach(struct comedi_device *dev)
 {
-	printk(KERN_DEBUG "comedi%d: pci7230: remove\n", dev->minor);
-
 	if (devpriv && devpriv->pci_dev) {
 		if (dev->iobase)
 			comedi_pci_disable(devpriv->pci_dev);
 		pci_dev_put(devpriv->pci_dev);
 	}
-
-	return 0;
 }

-static int adl_pci7230_do_insn_bits(struct comedi_device *dev,
-	struct comedi_subdevice *s,
-	struct comedi_insn *insn,
-	unsigned int *data)
+static struct comedi_driver adl_pci7230_driver = {
+	.driver_name	= "adl_pci7230",
+	.module		= THIS_MODULE,
+	.attach		= adl_pci7230_attach,
+	.detach		= adl_pci7230_detach,
+};
+
+static int __devinit adl_pci7230_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
 {
-	if (insn->n != 2)
-		return -EINVAL;
-
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
-
-		outl((s->state  << 16) & 0xffffffff, dev->iobase + PCI7230_DO);
-	}
-
-	return 2;
+	return comedi_pci_auto_config(dev, &adl_pci7230_driver);
 }

-static int adl_pci7230_di_insn_bits(struct comedi_device *dev,
-	struct comedi_subdevice *s,
-	struct comedi_insn *insn,
-	unsigned int *data)
-{
-	if (insn->n != 2)
-		return -EINVAL;
-
-	data[1] = inl(dev->iobase + PCI7230_DI) & 0xffffffff;
-
-	return 2;
-}
-
-static int __devinit driver_adl_pci7230_pci_probe(struct pci_dev *dev,
-						  const struct pci_device_id
-						  *ent)
-{
-	return comedi_pci_auto_config(dev, driver_adl_pci7230.driver_name);
-}
-
-static void __devexit driver_adl_pci7230_pci_remove(struct pci_dev *dev)
+static void __devexit adl_pci7230_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }

-static struct pci_driver driver_adl_pci7230_pci_driver = {
-	.id_table = adl_pci7230_pci_table,
-	.probe = &driver_adl_pci7230_pci_probe,
-	.remove = __devexit_p(&driver_adl_pci7230_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(adl_pci7230_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7230) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, adl_pci7230_pci_table);

-static int __init driver_adl_pci7230_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_adl_pci7230);
-	if (retval < 0)
-		return retval;
-
-	driver_adl_pci7230_pci_driver.name =
-	    (char *)driver_adl_pci7230.driver_name;
-	return pci_register_driver(&driver_adl_pci7230_pci_driver);
-}
-
-static void __exit driver_adl_pci7230_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_adl_pci7230_pci_driver);
-	comedi_driver_unregister(&driver_adl_pci7230);
-}
-
-module_init(driver_adl_pci7230_init_module);
-module_exit(driver_adl_pci7230_cleanup_module);
+static struct pci_driver adl_pci7230_pci_driver = {
+	.name		= "adl_pci7230",
+	.id_table	= adl_pci7230_pci_table,
+	.probe		= adl_pci7230_pci_probe,
+	.remove		= __devexit_p(adl_pci7230_pci_remove),
+};
+module_comedi_pci_driver(adl_pci7230_driver, adl_pci7230_pci_driver);

 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
--- a/drivers/staging/comedi/drivers/adl_pci7296.c
+++ b/drivers/staging/comedi/drivers/adl_pci7296.c
@ -48,13 +48,6 @@ Configuration Options:

 #define PCI_DEVICE_ID_PCI7296 0x7296

-static DEFINE_PCI_DEVICE_TABLE(adl_pci7296_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7296) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, adl_pci7296_pci_table);
-
 struct adl_pci7296_private {
 	int data;
 	struct pci_dev *pci_dev;
@ -62,16 +55,6 @@ struct adl_pci7296_private {

 #define devpriv ((struct adl_pci7296_private *)dev->private)

-static int adl_pci7296_attach(struct comedi_device *dev,
-			      struct comedi_devconfig *it);
-static int adl_pci7296_detach(struct comedi_device *dev);
-static struct comedi_driver driver_adl_pci7296 = {
-	.driver_name = "adl_pci7296",
-	.module = THIS_MODULE,
-	.attach = adl_pci7296_attach,
-	.detach = adl_pci7296_detach,
-};
-
 static int adl_pci7296_attach(struct comedi_device *dev,
 			      struct comedi_devconfig *it)
 {
@ -151,66 +134,52 @@ static int adl_pci7296_attach(struct comedi_device *dev,
 	return -EIO;
 }

-static int adl_pci7296_detach(struct comedi_device *dev)
+static void adl_pci7296_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: pci7432: remove\n", dev->minor);
-
 	if (devpriv && devpriv->pci_dev) {
 		if (dev->iobase)
 			comedi_pci_disable(devpriv->pci_dev);
 		pci_dev_put(devpriv->pci_dev);
 	}
-	/*  detach four 8255 digital io subdevices */
 	if (dev->subdevices) {
 		subdev_8255_cleanup(dev, dev->subdevices + 0);
 		subdev_8255_cleanup(dev, dev->subdevices + 1);
 		subdev_8255_cleanup(dev, dev->subdevices + 2);
 		subdev_8255_cleanup(dev, dev->subdevices + 3);
-
 	}
-
-	return 0;
 }

-static int __devinit driver_adl_pci7296_pci_probe(struct pci_dev *dev,
-						  const struct pci_device_id
-						  *ent)
+static struct comedi_driver adl_pci7296_driver = {
+	.driver_name	= "adl_pci7296",
+	.module		= THIS_MODULE,
+	.attach		= adl_pci7296_attach,
+	.detach		= adl_pci7296_detach,
+};
+
+static int __devinit adl_pci7296_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_adl_pci7296.driver_name);
+	return comedi_pci_auto_config(dev, &adl_pci7296_driver);
 }

-static void __devexit driver_adl_pci7296_pci_remove(struct pci_dev *dev)
+static void __devexit adl_pci7296_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }

-static struct pci_driver driver_adl_pci7296_pci_driver = {
-	.id_table = adl_pci7296_pci_table,
-	.probe = &driver_adl_pci7296_pci_probe,
-	.remove = __devexit_p(&driver_adl_pci7296_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(adl_pci7296_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7296) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, adl_pci7296_pci_table);

-static int __init driver_adl_pci7296_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_adl_pci7296);
-	if (retval < 0)
-		return retval;
-
-	driver_adl_pci7296_pci_driver.name =
-	    (char *)driver_adl_pci7296.driver_name;
-	return pci_register_driver(&driver_adl_pci7296_pci_driver);
-}
-
-static void __exit driver_adl_pci7296_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_adl_pci7296_pci_driver);
-	comedi_driver_unregister(&driver_adl_pci7296);
-}
-
-module_init(driver_adl_pci7296_init_module);
-module_exit(driver_adl_pci7296_cleanup_module);
+static struct pci_driver adl_pci7296_pci_driver = {
+	.name		= "adl_pci7296",
+	.id_table	= adl_pci7296_pci_table,
+	.probe		= adl_pci7296_pci_probe,
+	.remove		= __devexit_p(adl_pci7296_pci_remove),
+};
+module_comedi_pci_driver(adl_pci7296_driver, adl_pci7296_pci_driver);

 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
--- a/drivers/staging/comedi/drivers/adl_pci7432.c
+++ b/drivers/staging/comedi/drivers/adl_pci7432.c
@ -43,13 +43,6 @@ Configuration Options:

 #define PCI_DEVICE_ID_PCI7432 0x7432

-static DEFINE_PCI_DEVICE_TABLE(adl_pci7432_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7432) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, adl_pci7432_pci_table);
-
 struct adl_pci7432_private {
 	int data;
 	struct pci_dev *pci_dev;
@ -57,29 +50,44 @@ struct adl_pci7432_private {

 #define devpriv ((struct adl_pci7432_private *)dev->private)

-static int adl_pci7432_attach(struct comedi_device *dev,
-			      struct comedi_devconfig *it);
-static int adl_pci7432_detach(struct comedi_device *dev);
-static struct comedi_driver driver_adl_pci7432 = {
-	.driver_name = "adl_pci7432",
-	.module = THIS_MODULE,
-	.attach = adl_pci7432_attach,
-	.detach = adl_pci7432_detach,
-};
+static int adl_pci7432_do_insn_bits(struct comedi_device *dev,
+				    struct comedi_subdevice *s,
+				    struct comedi_insn *insn,
+				    unsigned int *data)
+{
+	printk(KERN_DEBUG "comedi: pci7432_do_insn_bits called\n");
+	printk(KERN_DEBUG "comedi: data0: %8x data1: %8x\n", data[0], data[1]);

-/* Digital IO */
+	if (insn->n != 2)
+		return -EINVAL;
+
+	if (data[0]) {
+		s->state &= ~data[0];
+		s->state |= (data[0] & data[1]);
+
+		printk(KERN_DEBUG "comedi: out: %8x on iobase %4lx\n", s->state,
+		       dev->iobase + PCI7432_DO);
+		outl(s->state & 0xffffffff, dev->iobase + PCI7432_DO);
+	}
+	return 2;
+}

 static int adl_pci7432_di_insn_bits(struct comedi_device *dev,
 				    struct comedi_subdevice *s,
 				    struct comedi_insn *insn,
-				    unsigned int *data);
+				    unsigned int *data)
+{
+	printk(KERN_DEBUG "comedi: pci7432_di_insn_bits called\n");
+	printk(KERN_DEBUG "comedi: data0: %8x data1: %8x\n", data[0], data[1]);

-static int adl_pci7432_do_insn_bits(struct comedi_device *dev,
-				    struct comedi_subdevice *s,
-				    struct comedi_insn *insn,
-				    unsigned int *data);
+	if (insn->n != 2)
+		return -EINVAL;

-/*            */
+	data[1] = inl(dev->iobase + PCI7432_DI) & 0xffffffff;
+	printk(KERN_DEBUG "comedi: data1 %8x\n", data[1]);
+
+	return 2;
+}

 static int adl_pci7432_attach(struct comedi_device *dev,
 			      struct comedi_devconfig *it)
@ -153,97 +161,46 @@ static int adl_pci7432_attach(struct comedi_device *dev,
 	return -EIO;
 }

-static int adl_pci7432_detach(struct comedi_device *dev)
+static void adl_pci7432_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: pci7432: remove\n", dev->minor);
-
 	if (devpriv && devpriv->pci_dev) {
 		if (dev->iobase)
 			comedi_pci_disable(devpriv->pci_dev);
 		pci_dev_put(devpriv->pci_dev);
 	}
-
-	return 0;
 }

-static int adl_pci7432_do_insn_bits(struct comedi_device *dev,
-				    struct comedi_subdevice *s,
-				    struct comedi_insn *insn,
-				    unsigned int *data)
+static struct comedi_driver adl_pci7432_driver = {
+	.driver_name	= "adl_pci7432",
+	.module		= THIS_MODULE,
+	.attach		= adl_pci7432_attach,
+	.detach		= adl_pci7432_detach,
+};
+
+static int __devinit adl_pci7432_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
 {
-	printk(KERN_DEBUG "comedi: pci7432_do_insn_bits called\n");
-	printk(KERN_DEBUG "comedi: data0: %8x data1: %8x\n", data[0], data[1]);
-
-	if (insn->n != 2)
-		return -EINVAL;
-
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
-
-		printk(KERN_DEBUG "comedi: out: %8x on iobase %4lx\n", s->state,
-		       dev->iobase + PCI7432_DO);
-		outl(s->state & 0xffffffff, dev->iobase + PCI7432_DO);
-	}
-	return 2;
+	return comedi_pci_auto_config(dev, &adl_pci7432_driver);
 }

-static int adl_pci7432_di_insn_bits(struct comedi_device *dev,
-				    struct comedi_subdevice *s,
-				    struct comedi_insn *insn,
-				    unsigned int *data)
-{
-	printk(KERN_DEBUG "comedi: pci7432_di_insn_bits called\n");
-	printk(KERN_DEBUG "comedi: data0: %8x data1: %8x\n", data[0], data[1]);
-
-	if (insn->n != 2)
-		return -EINVAL;
-
-	data[1] = inl(dev->iobase + PCI7432_DI) & 0xffffffff;
-	printk(KERN_DEBUG "comedi: data1 %8x\n", data[1]);
-
-	return 2;
-}
-
-static int __devinit driver_adl_pci7432_pci_probe(struct pci_dev *dev,
-						  const struct pci_device_id
-						  *ent)
-{
-	return comedi_pci_auto_config(dev, driver_adl_pci7432.driver_name);
-}
-
-static void __devexit driver_adl_pci7432_pci_remove(struct pci_dev *dev)
+static void __devexit adl_pci7432_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }

-static struct pci_driver driver_adl_pci7432_pci_driver = {
-	.id_table = adl_pci7432_pci_table,
-	.probe = &driver_adl_pci7432_pci_probe,
-	.remove = __devexit_p(&driver_adl_pci7432_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(adl_pci7432_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7432) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, adl_pci7432_pci_table);

-static int __init driver_adl_pci7432_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_adl_pci7432);
-	if (retval < 0)
-		return retval;
-
-	driver_adl_pci7432_pci_driver.name =
-	    (char *)driver_adl_pci7432.driver_name;
-	return pci_register_driver(&driver_adl_pci7432_pci_driver);
-}
-
-static void __exit driver_adl_pci7432_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_adl_pci7432_pci_driver);
-	comedi_driver_unregister(&driver_adl_pci7432);
-}
-
-module_init(driver_adl_pci7432_init_module);
-module_exit(driver_adl_pci7432_cleanup_module);
+static struct pci_driver adl_pci7432_pci_driver = {
+	.name		= "adl_pci7432",
+	.id_table	= adl_pci7432_pci_table,
+	.probe		= adl_pci7432_pci_probe,
+	.remove		= __devexit_p(adl_pci7432_pci_remove),
+};
+module_comedi_pci_driver(adl_pci7432_driver, adl_pci7432_pci_driver);

 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
--- a/drivers/staging/comedi/drivers/adl_pci8164.c
+++ b/drivers/staging/comedi/drivers/adl_pci8164.c
@ -56,13 +56,6 @@ Configuration Options:

 #define PCI_DEVICE_ID_PCI8164 0x8164

-static DEFINE_PCI_DEVICE_TABLE(adl_pci8164_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI8164) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, adl_pci8164_pci_table);
-
 struct adl_pci8164_private {
 	int data;
 	struct pci_dev *pci_dev;
@ -70,159 +63,6 @@ struct adl_pci8164_private {

 #define devpriv ((struct adl_pci8164_private *)dev->private)

-static int adl_pci8164_attach(struct comedi_device *dev,
-			      struct comedi_devconfig *it);
-static int adl_pci8164_detach(struct comedi_device *dev);
-static struct comedi_driver driver_adl_pci8164 = {
-	.driver_name = "adl_pci8164",
-	.module = THIS_MODULE,
-	.attach = adl_pci8164_attach,
-	.detach = adl_pci8164_detach,
-};
-
-static int adl_pci8164_insn_read_msts(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_read_ssts(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_read_buf0(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_read_buf1(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_write_cmd(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_write_otp(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_write_buf0(struct comedi_device *dev,
-				       struct comedi_subdevice *s,
-				       struct comedi_insn *insn,
-				       unsigned int *data);
-
-static int adl_pci8164_insn_write_buf1(struct comedi_device *dev,
-				       struct comedi_subdevice *s,
-				       struct comedi_insn *insn,
-				       unsigned int *data);
-
-static int adl_pci8164_attach(struct comedi_device *dev,
-			      struct comedi_devconfig *it)
-{
-	struct pci_dev *pcidev = NULL;
-	struct comedi_subdevice *s;
-	int bus, slot;
-
-	printk(KERN_INFO "comedi: attempt to attach...\n");
-	printk(KERN_INFO "comedi%d: adl_pci8164\n", dev->minor);
-
-	dev->board_name = "pci8164";
-	bus = it->options[0];
-	slot = it->options[1];
-
-	if (alloc_private(dev, sizeof(struct adl_pci8164_private)) < 0)
-		return -ENOMEM;
-
-	if (alloc_subdevices(dev, 4) < 0)
-		return -ENOMEM;
-
-	for_each_pci_dev(pcidev) {
-		if (pcidev->vendor == PCI_VENDOR_ID_ADLINK &&
-		    pcidev->device == PCI_DEVICE_ID_PCI8164) {
-			if (bus || slot) {
-				/* requested particular bus/slot */
-				if (pcidev->bus->number != bus
-					|| PCI_SLOT(pcidev->devfn) != slot)
-					continue;
-			}
-			devpriv->pci_dev = pcidev;
-			if (comedi_pci_enable(pcidev, "adl_pci8164") < 0) {
-				printk(KERN_ERR "comedi%d: Failed to enable "
-				"PCI device and request regions\n", dev->minor);
-				return -EIO;
-			}
-			dev->iobase = pci_resource_start(pcidev, 2);
-			printk(KERN_DEBUG "comedi: base addr %4lx\n",
-				   dev->iobase);
-
-			s = dev->subdevices + 0;
-			s->type = COMEDI_SUBD_PROC;
-			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-			s->n_chan = 4;
-			s->maxdata = 0xffff;
-			s->len_chanlist = 4;
-			/* s->range_table = &range_axis; */
-			s->insn_read = adl_pci8164_insn_read_msts;
-			s->insn_write = adl_pci8164_insn_write_cmd;
-
-			s = dev->subdevices + 1;
-			s->type = COMEDI_SUBD_PROC;
-			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-			s->n_chan = 4;
-			s->maxdata = 0xffff;
-			s->len_chanlist = 4;
-			/* s->range_table = &range_axis; */
-			s->insn_read = adl_pci8164_insn_read_ssts;
-			s->insn_write = adl_pci8164_insn_write_otp;
-
-			s = dev->subdevices + 2;
-			s->type = COMEDI_SUBD_PROC;
-			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-			s->n_chan = 4;
-			s->maxdata = 0xffff;
-			s->len_chanlist = 4;
-			/* s->range_table = &range_axis; */
-			s->insn_read = adl_pci8164_insn_read_buf0;
-			s->insn_write = adl_pci8164_insn_write_buf0;
-
-			s = dev->subdevices + 3;
-			s->type = COMEDI_SUBD_PROC;
-			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-			s->n_chan = 4;
-			s->maxdata = 0xffff;
-			s->len_chanlist = 4;
-			/* s->range_table = &range_axis; */
-			s->insn_read = adl_pci8164_insn_read_buf1;
-			s->insn_write = adl_pci8164_insn_write_buf1;
-
-			printk(KERN_INFO "comedi: attached\n");
-
-			return 1;
-		}
-	}
-
-	printk(KERN_ERR "comedi%d: no supported board found!"
-		   "(req. bus/slot : %d/%d)\n", dev->minor, bus, slot);
-	return -EIO;
-}
-
-static int adl_pci8164_detach(struct comedi_device *dev)
-{
-	printk(KERN_INFO "comedi%d: pci8164: remove\n", dev->minor);
-
-	if (devpriv && devpriv->pci_dev) {
-		if (dev->iobase)
-			comedi_pci_disable(devpriv->pci_dev);
-		pci_dev_put(devpriv->pci_dev);
-	}
-
-	return 0;
-}
-
 /*
 all the read commands are the same except for the addition a constant
 * const to the data for inw()
@ -384,45 +224,136 @@ static int adl_pci8164_insn_write_buf1(struct comedi_device *dev,
 	return 2;
 }

-static int __devinit driver_adl_pci8164_pci_probe(struct pci_dev *dev,
-						  const struct pci_device_id
-						  *ent)
+static int adl_pci8164_attach(struct comedi_device *dev,
+			      struct comedi_devconfig *it)
 {
-	return comedi_pci_auto_config(dev, driver_adl_pci8164.driver_name);
+	struct pci_dev *pcidev = NULL;
+	struct comedi_subdevice *s;
+	int bus, slot;
+
+	printk(KERN_INFO "comedi: attempt to attach...\n");
+	printk(KERN_INFO "comedi%d: adl_pci8164\n", dev->minor);
+
+	dev->board_name = "pci8164";
+	bus = it->options[0];
+	slot = it->options[1];
+
+	if (alloc_private(dev, sizeof(struct adl_pci8164_private)) < 0)
+		return -ENOMEM;
+
+	if (alloc_subdevices(dev, 4) < 0)
+		return -ENOMEM;
+
+	for_each_pci_dev(pcidev) {
+		if (pcidev->vendor == PCI_VENDOR_ID_ADLINK &&
+		    pcidev->device == PCI_DEVICE_ID_PCI8164) {
+			if (bus || slot) {
+				/* requested particular bus/slot */
+				if (pcidev->bus->number != bus
+					|| PCI_SLOT(pcidev->devfn) != slot)
+					continue;
+			}
+			devpriv->pci_dev = pcidev;
+			if (comedi_pci_enable(pcidev, "adl_pci8164") < 0) {
+				printk(KERN_ERR "comedi%d: Failed to enable "
+				"PCI device and request regions\n", dev->minor);
+				return -EIO;
+			}
+			dev->iobase = pci_resource_start(pcidev, 2);
+			printk(KERN_DEBUG "comedi: base addr %4lx\n",
+				   dev->iobase);
+
+			s = dev->subdevices + 0;
+			s->type = COMEDI_SUBD_PROC;
+			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+			s->n_chan = 4;
+			s->maxdata = 0xffff;
+			s->len_chanlist = 4;
+			/* s->range_table = &range_axis; */
+			s->insn_read = adl_pci8164_insn_read_msts;
+			s->insn_write = adl_pci8164_insn_write_cmd;
+
+			s = dev->subdevices + 1;
+			s->type = COMEDI_SUBD_PROC;
+			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+			s->n_chan = 4;
+			s->maxdata = 0xffff;
+			s->len_chanlist = 4;
+			/* s->range_table = &range_axis; */
+			s->insn_read = adl_pci8164_insn_read_ssts;
+			s->insn_write = adl_pci8164_insn_write_otp;
+
+			s = dev->subdevices + 2;
+			s->type = COMEDI_SUBD_PROC;
+			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+			s->n_chan = 4;
+			s->maxdata = 0xffff;
+			s->len_chanlist = 4;
+			/* s->range_table = &range_axis; */
+			s->insn_read = adl_pci8164_insn_read_buf0;
+			s->insn_write = adl_pci8164_insn_write_buf0;
+
+			s = dev->subdevices + 3;
+			s->type = COMEDI_SUBD_PROC;
+			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+			s->n_chan = 4;
+			s->maxdata = 0xffff;
+			s->len_chanlist = 4;
+			/* s->range_table = &range_axis; */
+			s->insn_read = adl_pci8164_insn_read_buf1;
+			s->insn_write = adl_pci8164_insn_write_buf1;
+
+			printk(KERN_INFO "comedi: attached\n");
+
+			return 1;
+		}
+	}
+
+	printk(KERN_ERR "comedi%d: no supported board found!"
+		   "(req. bus/slot : %d/%d)\n", dev->minor, bus, slot);
+	return -EIO;
 }

-static void __devexit driver_adl_pci8164_pci_remove(struct pci_dev *dev)
+static void adl_pci8164_detach(struct comedi_device *dev)
+{
+	if (devpriv && devpriv->pci_dev) {
+		if (dev->iobase)
+			comedi_pci_disable(devpriv->pci_dev);
+		pci_dev_put(devpriv->pci_dev);
+	}
+}
+
+static struct comedi_driver adl_pci8164_driver = {
+	.driver_name	= "adl_pci8164",
+	.module		= THIS_MODULE,
+	.attach		= adl_pci8164_attach,
+	.detach		= adl_pci8164_detach,
+};
+
+static int __devinit adl_pci8164_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &adl_pci8164_driver);
+}
+
+static void __devexit adl_pci8164_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }

-static struct pci_driver driver_adl_pci8164_pci_driver = {
-	.id_table = adl_pci8164_pci_table,
-	.probe = &driver_adl_pci8164_pci_probe,
-	.remove = __devexit_p(&driver_adl_pci8164_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(adl_pci8164_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI8164) },
+	{0}
 };
+MODULE_DEVICE_TABLE(pci, adl_pci8164_pci_table);

-static int __init driver_adl_pci8164_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_adl_pci8164);
-	if (retval < 0)
-		return retval;
-
-	driver_adl_pci8164_pci_driver.name =
-	    (char *)driver_adl_pci8164.driver_name;
-	return pci_register_driver(&driver_adl_pci8164_pci_driver);
-}
-
-static void __exit driver_adl_pci8164_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_adl_pci8164_pci_driver);
-	comedi_driver_unregister(&driver_adl_pci8164);
-}
-
-module_init(driver_adl_pci8164_init_module);
-module_exit(driver_adl_pci8164_cleanup_module);
+static struct pci_driver adl_pci8164_pci_driver = {
+	.name		= "adl_pci8164",
+	.id_table	= adl_pci8164_pci_table,
+	.probe		= adl_pci8164_pci_probe,
+	.remove		= __devexit_p(adl_pci8164_pci_remove),
+};
+module_comedi_pci_driver(adl_pci8164_driver, adl_pci8164_pci_driver);

 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
--- a/drivers/staging/comedi/drivers/adl_pci9111.c
+++ b/drivers/staging/comedi/drivers/adl_pci9111.c
@ -289,16 +289,6 @@ TODO:
 			PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_2); \
 	} while (0)

-/*  Function prototypes */
-
-static int pci9111_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pci9111_detach(struct comedi_device *dev);
-static void pci9111_ai_munge(struct comedi_device *dev,
-			     struct comedi_subdevice *s, void *data,
-			     unsigned int num_bytes,
-			     unsigned int start_chan_index);
-
 static const struct comedi_lrange pci9111_hr_ai_range = {
 	5,
 	{
@ -310,14 +300,6 @@ static const struct comedi_lrange pci9111_hr_ai_range = {
 	 }
 };

-static DEFINE_PCI_DEVICE_TABLE(pci9111_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HR_DEVICE_ID) },
-	/* { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID) }, */
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci9111_pci_table);
-
 /*  */
 /*  Board specification structure */
 /*  */
@ -354,51 +336,6 @@ static const struct pci9111_board pci9111_boards[] = {
 #define pci9111_board_nbr \
 	(sizeof(pci9111_boards)/sizeof(struct pci9111_board))

-static struct comedi_driver pci9111_driver = {
-	.driver_name = PCI9111_DRIVER_NAME,
-	.module = THIS_MODULE,
-	.attach = pci9111_attach,
-	.detach = pci9111_detach,
-};
-
-static int __devinit pci9111_driver_pci_probe(struct pci_dev *dev,
-					      const struct pci_device_id *ent)
-{
-	return comedi_pci_auto_config(dev, pci9111_driver.driver_name);
-}
-
-static void __devexit pci9111_driver_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver pci9111_driver_pci_driver = {
-	.id_table = pci9111_pci_table,
-	.probe = &pci9111_driver_pci_probe,
-	.remove = __devexit_p(&pci9111_driver_pci_remove)
-};
-
-static int __init pci9111_driver_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&pci9111_driver);
-	if (retval < 0)
-		return retval;
-
-	pci9111_driver_pci_driver.name = (char *)pci9111_driver.driver_name;
-	return pci_register_driver(&pci9111_driver_pci_driver);
-}
-
-static void __exit pci9111_driver_cleanup_module(void)
-{
-	pci_unregister_driver(&pci9111_driver_pci_driver);
-	comedi_driver_unregister(&pci9111_driver);
-}
-
-module_init(pci9111_driver_init_module);
-module_exit(pci9111_driver_cleanup_module);
-
 /*  Private data structure */

 struct pci9111_private_data {
@ -1445,31 +1382,54 @@ found:
 	return 0;
 }

-/*  Detach */
-
-static int pci9111_detach(struct comedi_device *dev)
+static void pci9111_detach(struct comedi_device *dev)
 {
-	/*  Reset device */
-
 	if (dev->private != NULL) {
 		if (dev_private->is_valid)
 			pci9111_reset(dev);
-
 	}
-	/*  Release previously allocated irq */
-
 	if (dev->irq != 0)
 		free_irq(dev->irq, dev);
-
 	if (dev_private != NULL && dev_private->pci_device != NULL) {
 		if (dev->iobase)
 			comedi_pci_disable(dev_private->pci_device);
 		pci_dev_put(dev_private->pci_device);
 	}
-
-	return 0;
 }

+static struct comedi_driver adl_pci9111_driver = {
+	.driver_name	= "adl_pci9111",
+	.module		= THIS_MODULE,
+	.attach		= pci9111_attach,
+	.detach		= pci9111_detach,
+};
+
+static int __devinit pci9111_pci_probe(struct pci_dev *dev,
+				       const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &adl_pci9111_driver);
+}
+
+static void __devexit pci9111_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(pci9111_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HR_DEVICE_ID) },
+	/* { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID) }, */
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, pci9111_pci_table);
+
+static struct pci_driver adl_pci9111_pci_driver = {
+	.name		= "adl_pci9111",
+	.id_table	= pci9111_pci_table,
+	.probe		= pci9111_pci_probe,
+	.remove		= __devexit_p(pci9111_pci_remove),
+};
+module_comedi_pci_driver(adl_pci9111_driver, adl_pci9111_pci_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@ -221,10 +221,6 @@ static const struct comedi_lrange range_pci9118hg = { 8, {
 					 * of BIP/UNI ranges
 					 */

-static int pci9118_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pci9118_detach(struct comedi_device *dev);
-
 struct boardtype {
 	const char *name;		/* board name */
 	int vendor_id;			/* PCI vendor a device ID of card */
@ -252,81 +248,6 @@ struct boardtype {

 };

-static DEFINE_PCI_DEVICE_TABLE(pci9118_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_AMCC, 0x80d9) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci9118_pci_table);
-
-static const struct boardtype boardtypes[] = {
-	{"pci9118dg", PCI_VENDOR_ID_AMCC, 0x80d9,
-	 AMCC_OP_REG_SIZE, IORANGE_9118,
-	 16, 8, 256, PCI9118_CHANLEN, 2, 0x0fff, 0x0fff,
-	 &range_pci9118dg_hr, &range_bipolar10,
-	 3000, 12, 512},
-	{"pci9118hg", PCI_VENDOR_ID_AMCC, 0x80d9,
-	 AMCC_OP_REG_SIZE, IORANGE_9118,
-	 16, 8, 256, PCI9118_CHANLEN, 2, 0x0fff, 0x0fff,
-	 &range_pci9118hg, &range_bipolar10,
-	 3000, 12, 512},
-	{"pci9118hr", PCI_VENDOR_ID_AMCC, 0x80d9,
-	 AMCC_OP_REG_SIZE, IORANGE_9118,
-	 16, 8, 256, PCI9118_CHANLEN, 2, 0xffff, 0x0fff,
-	 &range_pci9118dg_hr, &range_bipolar10,
-	 10000, 40, 512},
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct boardtype))
-
-static struct comedi_driver driver_pci9118 = {
-	.driver_name = "adl_pci9118",
-	.module = THIS_MODULE,
-	.attach = pci9118_attach,
-	.detach = pci9118_detach,
-	.num_names = n_boardtypes,
-	.board_name = &boardtypes[0].name,
-	.offset = sizeof(struct boardtype),
-};
-
-static int __devinit driver_pci9118_pci_probe(struct pci_dev *dev,
-					      const struct pci_device_id *ent)
-{
-	return comedi_pci_auto_config(dev, driver_pci9118.driver_name);
-}
-
-static void __devexit driver_pci9118_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver driver_pci9118_pci_driver = {
-	.id_table = pci9118_pci_table,
-	.probe = &driver_pci9118_pci_probe,
-	.remove = __devexit_p(&driver_pci9118_pci_remove)
-};
-
-static int __init driver_pci9118_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_pci9118);
-	if (retval < 0)
-		return retval;
-
-	driver_pci9118_pci_driver.name = (char *)driver_pci9118.driver_name;
-	return pci_register_driver(&driver_pci9118_pci_driver);
-}
-
-static void __exit driver_pci9118_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_pci9118_pci_driver);
-	comedi_driver_unregister(&driver_pci9118);
-}
-
-module_init(driver_pci9118_init_module);
-module_exit(driver_pci9118_cleanup_module);
-
 struct pci9118_private {
 	unsigned long iobase_a;	/* base+size for AMCC chip */
 	unsigned int master;	/* master capable */
@ -2190,9 +2111,6 @@ static int pci9118_reset(struct comedi_device *dev)
 	return 0;
 }

-/*
-==============================================================================
-*/
 static int pci9118_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it)
 {
@ -2435,10 +2353,7 @@ static int pci9118_attach(struct comedi_device *dev,
 	return 0;
 }

-/*
-==============================================================================
-*/
-static int pci9118_detach(struct comedi_device *dev)
+static void pci9118_detach(struct comedi_device *dev)
 {
 	if (dev->private) {
 		if (devpriv->valid)
@ -2458,13 +2373,100 @@ static int pci9118_detach(struct comedi_device *dev)
 			free_pages((unsigned long)devpriv->dmabuf_virt[1],
 				   devpriv->dmabuf_pages[1]);
 	}
-
-	return 0;
 }

-/*
-==============================================================================
-*/
+static const struct boardtype boardtypes[] = {
+	{
+		.name		= "pci9118dg",
+		.vendor_id	= PCI_VENDOR_ID_AMCC,
+		.device_id	= 0x80d9,
+		.iorange_amcc	= AMCC_OP_REG_SIZE,
+		.iorange_9118	= IORANGE_9118,
+		.n_aichan	= 16,
+		.n_aichand	= 8,
+		.mux_aichan	= 256,
+		.n_aichanlist	= PCI9118_CHANLEN,
+		.n_aochan	= 2,
+		.ai_maxdata	= 0x0fff,
+		.ao_maxdata	= 0x0fff,
+		.rangelist_ai	= &range_pci9118dg_hr,
+		.rangelist_ao	= &range_bipolar10,
+		.ai_ns_min	= 3000,
+		.ai_pacer_min	= 12,
+		.half_fifo_size	= 512,
+	}, {
+		.name		= "pci9118hg",
+		.vendor_id	= PCI_VENDOR_ID_AMCC,
+		.device_id	= 0x80d9,
+		.iorange_amcc	= AMCC_OP_REG_SIZE,
+		.iorange_9118	= IORANGE_9118,
+		.n_aichan	= 16,
+		.n_aichand	= 8,
+		.mux_aichan	= 256,
+		.n_aichanlist	= PCI9118_CHANLEN,
+		.n_aochan	= 2,
+		.ai_maxdata	= 0x0fff,
+		.ao_maxdata	= 0x0fff,
+		.rangelist_ai	= &range_pci9118hg,
+		.rangelist_ao	= &range_bipolar10,
+		.ai_ns_min	= 3000,
+		.ai_pacer_min	= 12,
+		.half_fifo_size	= 512,
+	}, {
+		.name		= "pci9118hr",
+		.vendor_id	= PCI_VENDOR_ID_AMCC,
+		.device_id	= 0x80d9,
+		.iorange_amcc	= AMCC_OP_REG_SIZE,
+		.iorange_9118	= IORANGE_9118,
+		.n_aichan	= 16,
+		.n_aichand	= 8,
+		.mux_aichan	= 256,
+		.n_aichanlist	= PCI9118_CHANLEN,
+		.n_aochan	= 2,
+		.ai_maxdata	= 0xffff,
+		.ao_maxdata	= 0x0fff,
+		.rangelist_ai	= &range_pci9118dg_hr,
+		.rangelist_ao	= &range_bipolar10,
+		.ai_ns_min	= 10000,
+		.ai_pacer_min	= 40,
+		.half_fifo_size	= 512,
+	},
+};
+
+static struct comedi_driver adl_pci9118_driver = {
+	.driver_name	= "adl_pci9118",
+	.module		= THIS_MODULE,
+	.attach		= pci9118_attach,
+	.detach		= pci9118_detach,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.board_name	= &boardtypes[0].name,
+	.offset		= sizeof(struct boardtype),
+};
+
+static int __devinit adl_pci9118_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &adl_pci9118_driver);
+}
+
+static void __devexit adl_pci9118_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(adl_pci9118_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMCC, 0x80d9) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, adl_pci9118_pci_table);
+
+static struct pci_driver adl_pci9118_pci_driver = {
+	.name		= "adl_pci9118",
+	.id_table	= adl_pci9118_pci_table,
+	.probe		= adl_pci9118_pci_probe,
+	.remove		= __devexit_p(adl_pci9118_pci_remove),
+};
+module_comedi_pci_driver(adl_pci9118_driver, adl_pci9118_pci_driver);

 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
--- a/drivers/staging/comedi/drivers/adq12b.c
+++ b/drivers/staging/comedi/drivers/adq12b.c
@ -125,24 +125,6 @@ struct adq12b_board {
 	int do_chans;
 };

-static const struct adq12b_board adq12b_boards[] = {
-	{
-	 .name = "adq12b",
-	 .ai_se_chans = 16,
-	 .ai_diff_chans = 8,
-	 .ai_bits = 12,
-	 .di_chans = 5,
-	 .do_chans = 8}
-/* potentially, more adq-based deviced will be added */
-/*,
-	.name = "adq12b",
-	.ai_chans = 16,  // this is just for reference, hardcoded again later
-	.ai_bits = 12,
-	.di_chans = 8,
-	.do_chans = 5
-	}*/
-};
-
 #define thisboard ((const struct adq12b_board *)dev->board_ptr)

 struct adq12b_private {
@ -156,41 +138,88 @@ struct adq12b_private {
 #define devpriv ((struct adq12b_private *)dev->private)

 /*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
+ * "instructions" read/write data in "one-shot" or "software-triggered"
+ * mode.
 */
-static int adq12b_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int adq12b_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver_adq12b = {
-	.driver_name = "adq12b",
-	.module = THIS_MODULE,
-	.attach = adq12b_attach,
-	.detach = adq12b_detach,
-	.board_name = &adq12b_boards[0].name,
-	.offset = sizeof(struct adq12b_board),
-	.num_names = ARRAY_SIZE(adq12b_boards),
-};

 static int adq12b_ai_rinsn(struct comedi_device *dev,
 			   struct comedi_subdevice *s, struct comedi_insn *insn,
-			   unsigned int *data);
+			   unsigned int *data)
+{
+	int n, i;
+	int range, channel;
+	unsigned char hi, lo, status;
+
+	/* change channel and range only if it is different from the previous */
+	range = CR_RANGE(insn->chanspec);
+	channel = CR_CHAN(insn->chanspec);
+	if (channel != devpriv->last_channel || range != devpriv->last_range) {
+		outb((range << 4) | channel, dev->iobase + ADQ12B_CTREG);
+		udelay(50);	/* wait for the mux to settle */
+	}
+
+	/* trigger conversion */
+	status = inb(dev->iobase + ADQ12B_ADLOW);
+
+	/* convert n samples */
+	for (n = 0; n < insn->n; n++) {
+
+		/* wait for end of conversion */
+		i = 0;
+		do {
+			/* udelay(1); */
+			status = inb(dev->iobase + ADQ12B_STINR);
+			status = status & ADQ12B_EOC;
+		} while (status == 0 && ++i < TIMEOUT);
+		/* } while (++i < 10); */
+
+		/* read data */
+		hi = inb(dev->iobase + ADQ12B_ADHIG);
+		lo = inb(dev->iobase + ADQ12B_ADLOW);
+
+		/* printk("debug: chan=%d range=%d status=%d hi=%d lo=%d\n",
+		       channel, range, status,  hi, lo); */
+		data[n] = (hi << 8) | lo;
+
+	}
+
+	/* return the number of samples read/written */
+	return n;
+}
+
 static int adq12b_di_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
+			       struct comedi_insn *insn, unsigned int *data)
+{
+
+	/* only bits 0-4 have information about digital inputs */
+	data[1] = (inb(dev->iobase + ADQ12B_STINR) & (0x1f));
+
+	return 2;
+}
+
 static int adq12b_do_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
+			       struct comedi_insn *insn, unsigned int *data)
+{
+	int channel;
+
+	for (channel = 0; channel < 8; channel++)
+		if (((data[0] >> channel) & 0x01) != 0)
+			outb((((data[1] >> channel) & 0x01) << 3) | channel,
+			     dev->iobase + ADQ12B_OUTBR);
+
+	/* store information to retrieve when asked for reading */
+	if (data[0]) {
+		devpriv->digital_state &= ~data[0];
+		devpriv->digital_state |= (data[0] & data[1]);
+	}
+
+	data[1] = devpriv->digital_state;
+
+	return 2;
+}

-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
 static int adq12b_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
@ -295,125 +324,34 @@ static int adq12b_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }

-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int adq12b_detach(struct comedi_device *dev)
+static void adq12b_detach(struct comedi_device *dev)
 {
 	if (dev->iobase)
 		release_region(dev->iobase, ADQ12B_SIZE);
-
 	kfree(devpriv);
-
-	printk(KERN_INFO "comedi%d: adq12b: removed\n", dev->minor);
-
-	return 0;
 }

-/*
- * "instructions" read/write data in "one-shot" or "software-triggered"
- * mode.
- */
+static const struct adq12b_board adq12b_boards[] = {
+	{
+		.name		= "adq12b",
+		.ai_se_chans	= 16,
+		.ai_diff_chans	= 8,
+		.ai_bits	= 12,
+		.di_chans	= 5,
+		.do_chans	= 8,
+	},
+};

-static int adq12b_ai_rinsn(struct comedi_device *dev,
-			   struct comedi_subdevice *s, struct comedi_insn *insn,
-			   unsigned int *data)
-{
-	int n, i;
-	int range, channel;
-	unsigned char hi, lo, status;
-
-	/* change channel and range only if it is different from the previous */
-	range = CR_RANGE(insn->chanspec);
-	channel = CR_CHAN(insn->chanspec);
-	if (channel != devpriv->last_channel || range != devpriv->last_range) {
-		outb((range << 4) | channel, dev->iobase + ADQ12B_CTREG);
-		udelay(50);	/* wait for the mux to settle */
-	}
-
-	/* trigger conversion */
-	status = inb(dev->iobase + ADQ12B_ADLOW);
-
-	/* convert n samples */
-	for (n = 0; n < insn->n; n++) {
-
-		/* wait for end of conversion */
-		i = 0;
-		do {
-			/* udelay(1); */
-			status = inb(dev->iobase + ADQ12B_STINR);
-			status = status & ADQ12B_EOC;
-		} while (status == 0 && ++i < TIMEOUT);
-		/* } while (++i < 10); */
-
-		/* read data */
-		hi = inb(dev->iobase + ADQ12B_ADHIG);
-		lo = inb(dev->iobase + ADQ12B_ADLOW);
-
-		/* printk("debug: chan=%d range=%d status=%d hi=%d lo=%d\n",
-		       channel, range, status,  hi, lo); */
-		data[n] = (hi << 8) | lo;
-
-	}
-
-	/* return the number of samples read/written */
-	return n;
-}
-
-static int adq12b_di_insn_bits(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
-{
-
-	/* only bits 0-4 have information about digital inputs */
-	data[1] = (inb(dev->iobase + ADQ12B_STINR) & (0x1f));
-
-	return 2;
-}
-
-static int adq12b_do_insn_bits(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
-{
-	int channel;
-
-	for (channel = 0; channel < 8; channel++)
-		if (((data[0] >> channel) & 0x01) != 0)
-			outb((((data[1] >> channel) & 0x01) << 3) | channel,
-			     dev->iobase + ADQ12B_OUTBR);
-
-	/* store information to retrieve when asked for reading */
-	if (data[0]) {
-		devpriv->digital_state &= ~data[0];
-		devpriv->digital_state |= (data[0] & data[1]);
-	}
-
-	data[1] = devpriv->digital_state;
-
-	return 2;
-}
-
-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
-static int __init driver_adq12b_init_module(void)
-{
-	return comedi_driver_register(&driver_adq12b);
-}
-
-static void __exit driver_adq12b_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_adq12b);
-}
-
-module_init(driver_adq12b_init_module);
-module_exit(driver_adq12b_cleanup_module);
+static struct comedi_driver adq12b_driver = {
+	.driver_name	= "adq12b",
+	.module		= THIS_MODULE,
+	.attach		= adq12b_attach,
+	.detach		= adq12b_detach,
+	.board_name	= &adq12b_boards[0].name,
+	.offset		= sizeof(struct adq12b_board),
+	.num_names	= ARRAY_SIZE(adq12b_boards),
+};
+module_comedi_driver(adq12b_driver);

 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@ -191,10 +191,6 @@ static const struct comedi_lrange range_pci171x_da = { 2, {
 							   }
 };

-static int pci1710_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pci1710_detach(struct comedi_device *dev);
-
 struct boardtype {
 	const char *name;	/*  board name */
 	int device_id;
@ -216,17 +212,6 @@ struct boardtype {
 	unsigned int fifo_half_size;	/*  size of FIFO/2 */
 };

-static DEFINE_PCI_DEVICE_TABLE(pci1710_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1710) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1711) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1713) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1720) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1731) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci1710_pci_table);
-
 static const struct boardtype boardtypes[] = {
 	{"pci1710", 0x1710,
 	 IORANGE_171x, 1, TYPE_PCI171X,
@ -264,18 +249,6 @@ static const struct boardtype boardtypes[] = {
 	{.name = DRV_NAME},
 };

-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct boardtype))
-
-static struct comedi_driver driver_pci1710 = {
-	.driver_name = DRV_NAME,
-	.module = THIS_MODULE,
-	.attach = pci1710_attach,
-	.detach = pci1710_detach,
-	.num_names = n_boardtypes,
-	.board_name = &boardtypes[0].name,
-	.offset = sizeof(struct boardtype),
-};
-
 struct pci1710_private {
 	struct pci_dev *pcidev;	/*  ptr to PCI device */
 	char valid;		/*  card is usable */
@ -676,7 +649,9 @@ static void interrupt_pci1710_every_sample(void *d)
 			     s->async->buf_int_count, s->async->buf_int_ptr,
 			     s->async->buf_user_count, s->async->buf_user_ptr);
 			DPRINTK("adv_pci1710 EDBG: EOS2\n");
-			if ((!devpriv->neverending_ai) && (devpriv->ai_act_scan >= devpriv->ai_scans)) {	/*  all data sampled */
+			if ((!devpriv->neverending_ai) &&
+			    (devpriv->ai_act_scan >= devpriv->ai_scans)) {
+				/*  all data sampled */
 				pci171x_ai_cancel(dev, s);
 				s->async->events |= COMEDI_CB_EOA;
 				comedi_event(dev, s);
@ -804,8 +779,8 @@ static irqreturn_t interrupt_service_pci1710(int irq, void *d)
 		irq);
 	if (!dev->attached)	/*  is device attached? */
 		return IRQ_NONE;	/*  no, exit */
-
-	if (!(inw(dev->iobase + PCI171x_STATUS) & Status_IRQ))	/*  is this interrupt from our board? */
+	/*  is this interrupt from our board? */
+	if (!(inw(dev->iobase + PCI171x_STATUS) & Status_IRQ))
 		return IRQ_NONE;	/*  no, exit */

 	DPRINTK("adv_pci1710 EDBG: interrupt_service_pci1710() ST: %4x\n",
@ -814,7 +789,7 @@ static irqreturn_t interrupt_service_pci1710(int irq, void *d)
 	if (devpriv->ai_et) {	/*  Switch from initial TRIG_EXT to TRIG_xxx. */
 		devpriv->ai_et = 0;
 		devpriv->CntrlReg &= Control_CNT0;
-		devpriv->CntrlReg |= Control_SW;	/*  set software trigger */
+		devpriv->CntrlReg |= Control_SW; /* set software trigger */
 		outw(devpriv->CntrlReg, dev->iobase + PCI171x_CONTROL);
 		devpriv->CntrlReg = devpriv->ai_et_CntrlReg;
 		outb(0, dev->iobase + PCI171x_CLRFIFO);
@ -865,7 +840,8 @@ static int pci171x_ai_docmd_and_mode(int mode, struct comedi_device *dev,
 	devpriv->neverending_ai = 0;

 	devpriv->CntrlReg &= Control_CNT0;
-	if ((devpriv->ai_flags & TRIG_WAKE_EOS)) {	/*  don't we want wake up every scan?            devpriv->ai_eos=1; */
+	/*  don't we want wake up every scan?  devpriv->ai_eos=1; */
+	if ((devpriv->ai_flags & TRIG_WAKE_EOS)) {
 		devpriv->ai_eos = 1;
 	} else {
 		devpriv->CntrlReg |= Control_ONEFH;
@ -982,13 +958,13 @@ static int pci171x_ai_cmdtest(struct comedi_device *dev,
 #ifdef PCI171X_EXTDEBUG
 		pci171x_cmdtest_out(1, cmd);
 #endif
-		DPRINTK
-		    ("adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=1\n",
-		     err);
+		DPRINTK(
+		"adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=1\n",
+		err);
 		return 1;
 	}

-	/* step 2: make sure trigger sources are unique and mutually compatible */
+	/* step2: make sure trigger srcs are unique and mutually compatible */

 	if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) {
 		cmd->start_src = TRIG_NOW;
@ -1015,9 +991,9 @@ static int pci171x_ai_cmdtest(struct comedi_device *dev,
 #ifdef PCI171X_EXTDEBUG
 		pci171x_cmdtest_out(2, cmd);
 #endif
-		DPRINTK
-		    ("adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=2\n",
-		     err);
+		DPRINTK(
+		"adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=2\n",
+		err);
 		return 2;
 	}

@ -1065,9 +1041,9 @@ static int pci171x_ai_cmdtest(struct comedi_device *dev,
 #ifdef PCI171X_EXTDEBUG
 		pci171x_cmdtest_out(3, cmd);
 #endif
-		DPRINTK
-		    ("adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=3\n",
-		     err);
+		DPRINTK(
+		"adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=3\n",
+		err);
 		return 3;
 	}

@ -1160,48 +1136,41 @@ static int check_channel_list(struct comedi_device *dev,
 		return 0;
 	}

-	if (n_chan > 1) {
-		chansegment[0] = chanlist[0];	/*  first channel is every time ok */
-		for (i = 1, seglen = 1; i < n_chan; i++, seglen++) {	/*  build part of chanlist */
-			/*  printk("%d. %d %d\n",i,CR_CHAN(chanlist[i]),CR_RANGE(chanlist[i])); */
-			if (chanlist[0] == chanlist[i])
-				break;	/*  we detect loop, this must by finish */
-			if (CR_CHAN(chanlist[i]) & 1)	/*  odd channel cann't by differencial */
-				if (CR_AREF(chanlist[i]) == AREF_DIFF) {
-					comedi_error(dev,
-						     "Odd channel can't be differential input!\n");
-					return 0;
-				}
-			nowmustbechan =
-			    (CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan;
-			if (CR_AREF(chansegment[i - 1]) == AREF_DIFF)
-				nowmustbechan = (nowmustbechan + 1) % s->n_chan;
-			if (nowmustbechan != CR_CHAN(chanlist[i])) {	/*  channel list isn't continuous :-( */
-				printk
-				    ("channel list must be continuous! chanlist[%i]=%d but must be %d or %d!\n",
-				     i, CR_CHAN(chanlist[i]), nowmustbechan,
-				     CR_CHAN(chanlist[0]));
-				return 0;
-			}
-			chansegment[i] = chanlist[i];	/*  well, this is next correct channel in list */
-		}
+	if (n_chan == 1)
+		return 1; /* seglen=1 */

-		for (i = 0, segpos = 0; i < n_chan; i++) {	/*  check whole chanlist */
-			/* printk("%d %d=%d %d\n",CR_CHAN(chansegment[i%seglen]),CR_RANGE(chansegment[i%seglen]),CR_CHAN(chanlist[i]),CR_RANGE(chanlist[i])); */
-			if (chanlist[i] != chansegment[i % seglen]) {
-				printk
-				    ("bad channel, reference or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n",
-				     i, CR_CHAN(chansegment[i]),
-				     CR_RANGE(chansegment[i]),
-				     CR_AREF(chansegment[i]),
-				     CR_CHAN(chanlist[i % seglen]),
-				     CR_RANGE(chanlist[i % seglen]),
-				     CR_AREF(chansegment[i % seglen]));
-				return 0;	/*  chan/gain list is strange */
-			}
+	chansegment[0] = chanlist[0]; /*  first channel is every time ok */
+	for (i = 1, seglen = 1; i < n_chan; i++, seglen++) {
+		if (chanlist[0] == chanlist[i])
+			break;	/*  we detected a loop, stop */
+		if ((CR_CHAN(chanlist[i]) & 1) &&
+		    (CR_AREF(chanlist[i]) == AREF_DIFF)) {
+			comedi_error(dev, "Odd channel cannot be differential input!\n");
+			return 0;
+		}
+		nowmustbechan = (CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan;
+		if (CR_AREF(chansegment[i - 1]) == AREF_DIFF)
+			nowmustbechan = (nowmustbechan + 1) % s->n_chan;
+		if (nowmustbechan != CR_CHAN(chanlist[i])) {
+			printk("channel list must be continuous! chanlist[%i]=%d but must be %d or %d!\n",
+			       i, CR_CHAN(chanlist[i]), nowmustbechan,
+			       CR_CHAN(chanlist[0]));
+			return 0;
+		}
+		chansegment[i] = chanlist[i]; /* next correct channel in list */
+	}
+
+	for (i = 0, segpos = 0; i < n_chan; i++) {
+		if (chanlist[i] != chansegment[i % seglen]) {
+			printk("bad channel, reference or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n",
+			       i, CR_CHAN(chansegment[i]),
+			       CR_RANGE(chansegment[i]),
+			       CR_AREF(chansegment[i]),
+			       CR_CHAN(chanlist[i % seglen]),
+			       CR_RANGE(chanlist[i % seglen]),
+			       CR_AREF(chansegment[i % seglen]));
+			return 0;
 		}
-	} else {
-		seglen = 1;
 	}
 	return seglen;
 }
@ -1221,14 +1190,14 @@ static void setup_channel_list(struct comedi_device *dev,
 	DPRINTK("SegLen: %d\n", seglen);
 	for (i = 0; i < seglen; i++) {	/*  store range list to card */
 		chanprog = muxonechan[CR_CHAN(chanlist[i])];
-		outw(chanprog, dev->iobase + PCI171x_MUX);	/* select channel */
+		outw(chanprog, dev->iobase + PCI171x_MUX); /* select channel */
 		range = this_board->rangecode_ai[CR_RANGE(chanlist[i])];
 		if (CR_AREF(chanlist[i]) == AREF_DIFF)
 			range |= 0x0020;
-		outw(range, dev->iobase + PCI171x_RANGE);	/* select gain */
+		outw(range, dev->iobase + PCI171x_RANGE); /* select gain */
 #ifdef PCI171x_PARANOIDCHECK
 		devpriv->act_chanlist[i] =
-		    (CR_CHAN(chanlist[i]) << 12) & 0xf000;
+			(CR_CHAN(chanlist[i]) << 12) & 0xf000;
 #endif
 		DPRINTK("GS: %2d. [%4x]=%4x %4x\n", i, chanprog, range,
 			devpriv->act_chanlist[i]);
@ -1236,13 +1205,14 @@ static void setup_channel_list(struct comedi_device *dev,
 #ifdef PCI171x_PARANOIDCHECK
 	for ( ; i < n_chan; i++) { /* store remainder of channel list */
 		devpriv->act_chanlist[i] =
-		    (CR_CHAN(chanlist[i]) << 12) & 0xf000;
+			(CR_CHAN(chanlist[i]) << 12) & 0xf000;
 	}
 #endif

 	devpriv->ai_et_MuxVal =
-	    CR_CHAN(chanlist[0]) | (CR_CHAN(chanlist[seglen - 1]) << 8);
-	outw(devpriv->ai_et_MuxVal, dev->iobase + PCI171x_MUX);	/* select channel interval to scan */
+		CR_CHAN(chanlist[0]) | (CR_CHAN(chanlist[seglen - 1]) << 8);
+	/* select channel interval to scan */
+	outw(devpriv->ai_et_MuxVal, dev->iobase + PCI171x_MUX);
 	DPRINTK("MUX: %4x L%4x.H%4x\n",
 		CR_CHAN(chanlist[0]) | (CR_CHAN(chanlist[seglen - 1]) << 8),
 		CR_CHAN(chanlist[0]), CR_CHAN(chanlist[seglen - 1]));
@ -1365,9 +1335,6 @@ static int pci1710_reset(struct comedi_device *dev)
 	DPRINTK("adv_pci1710 EDBG: END: pci1710_reset(...)\n");
 }

-/*
-==============================================================================
-*/
 static int pci1710_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it)
 {
@ -1398,13 +1365,13 @@ static int pci1710_attach(struct comedi_device *dev,
 	while (NULL != (pcidev = pci_get_device(PCI_VENDOR_ID_ADVANTECH,
 						PCI_ANY_ID, pcidev))) {
 		if (strcmp(this_board->name, DRV_NAME) == 0) {
-			for (i = 0; i < n_boardtypes; ++i) {
+			for (i = 0; i < ARRAY_SIZE(boardtypes); ++i) {
 				if (pcidev->device == boardtypes[i].device_id) {
 					board_index = i;
 					break;
 				}
 			}
-			if (i == n_boardtypes)
+			if (i == ARRAY_SIZE(boardtypes))
 				continue;
 		} else {
 			if (pcidev->device != boardtypes[board_index].device_id)
@ -1584,12 +1551,8 @@ static int pci1710_attach(struct comedi_device *dev,
 	return 0;
 }

-/*
-==============================================================================
-*/
-static int pci1710_detach(struct comedi_device *dev)
+static void pci1710_detach(struct comedi_device *dev)
 {
-
 	if (dev->private) {
 		if (devpriv->valid)
 			pci1710_reset(dev);
@ -1598,57 +1561,49 @@ static int pci1710_detach(struct comedi_device *dev)
 		if (devpriv->pcidev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pcidev);
-
 			pci_dev_put(devpriv->pcidev);
 		}
 	}
-
-	return 0;
 }

-/*
-==============================================================================
-*/
-static int __devinit driver_pci1710_pci_probe(struct pci_dev *dev,
-					      const struct pci_device_id *ent)
+static struct comedi_driver adv_pci1710_driver = {
+	.driver_name	= "adv_pci1710",
+	.module		= THIS_MODULE,
+	.attach		= pci1710_attach,
+	.detach		= pci1710_detach,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.board_name	= &boardtypes[0].name,
+	.offset		= sizeof(struct boardtype),
+};
+
+static int __devinit adv_pci1710_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_pci1710.driver_name);
+	return comedi_pci_auto_config(dev, &adv_pci1710_driver);
 }

-static void __devexit driver_pci1710_pci_remove(struct pci_dev *dev)
+static void __devexit adv_pci1710_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }

-static struct pci_driver driver_pci1710_pci_driver = {
-	.id_table = pci1710_pci_table,
-	.probe = &driver_pci1710_pci_probe,
-	.remove = __devexit_p(&driver_pci1710_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(adv_pci1710_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1710) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1711) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1713) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1720) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1731) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, adv_pci1710_pci_table);

-static int __init driver_pci1710_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_pci1710);
-	if (retval < 0)
-		return retval;
-
-	driver_pci1710_pci_driver.name = (char *)driver_pci1710.driver_name;
-	return pci_register_driver(&driver_pci1710_pci_driver);
-}
-
-static void __exit driver_pci1710_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_pci1710_pci_driver);
-	comedi_driver_unregister(&driver_pci1710);
-}
-
-module_init(driver_pci1710_init_module);
-module_exit(driver_pci1710_cleanup_module);
-/*
-==============================================================================
-*/
+static struct pci_driver adv_pci1710_pci_driver = {
+	.name		= "adv_pci1710",
+	.id_table	= adv_pci1710_pci_table,
+	.probe		= adv_pci1710_pci_probe,
+	.remove		= __devexit_p(adv_pci1710_pci_remove),
+};
+module_comedi_pci_driver(adv_pci1710_driver, adv_pci1710_pci_driver);

 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
--- a/drivers/staging/comedi/drivers/adv_pci1723.c
+++ b/drivers/staging/comedi/drivers/adv_pci1723.c
@ -150,36 +150,6 @@ static const struct pci1723_board boardtypes[] = {
 	 },
 };

-/*
- * This is used by modprobe to translate PCI IDs to drivers.
- * Should only be used for PCI and ISA-PnP devices
- */
-static DEFINE_PCI_DEVICE_TABLE(pci1723_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1723) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci1723_pci_table);
-
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int pci1723_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pci1723_detach(struct comedi_device *dev);
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pci1723_board))
-
-static struct comedi_driver driver_pci1723 = {
-	.driver_name = "adv_pci1723",
-	.module = THIS_MODULE,
-	.attach = pci1723_attach,
-	.detach = pci1723_detach,
-};
-
 /* This structure is for data unique to this hardware driver. */
 struct pci1723_private {
 	int valid;		/* card is usable; */
@ -319,10 +289,6 @@ static int pci1723_dio_insn_bits(struct comedi_device *dev,
 	return 2;
 }

-/*
- * Attach is called by the Comedi core to configure the driver
- * for a pci1723 board.
- */
 static int pci1723_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it)
 {
@ -465,73 +431,50 @@ static int pci1723_attach(struct comedi_device *dev,
 	return 0;
 }

-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int pci1723_detach(struct comedi_device *dev)
+static void pci1723_detach(struct comedi_device *dev)
 {
-	printk(KERN_ERR "comedi%d: pci1723: remove\n", dev->minor);
-
 	if (dev->private) {
 		if (devpriv->valid)
 			pci1723_reset(dev);
-
 		if (devpriv->pcidev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pcidev);
 			pci_dev_put(devpriv->pcidev);
 		}
 	}
-
-	return 0;
 }

-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
-static int __devinit driver_pci1723_pci_probe(struct pci_dev *dev,
-					      const struct pci_device_id *ent)
+static struct comedi_driver adv_pci1723_driver = {
+	.driver_name	= "adv_pci1723",
+	.module		= THIS_MODULE,
+	.attach		= pci1723_attach,
+	.detach		= pci1723_detach,
+};
+
+static int __devinit adv_pci1723_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_pci1723.driver_name);
+	return comedi_pci_auto_config(dev, &adv_pci1723_driver);
 }

-static void __devexit driver_pci1723_pci_remove(struct pci_dev *dev)
+static void __devexit adv_pci1723_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }

-static struct pci_driver driver_pci1723_pci_driver = {
-	.id_table = pci1723_pci_table,
-	.probe = &driver_pci1723_pci_probe,
-	.remove = __devexit_p(&driver_pci1723_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(adv_pci1723_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1723) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, adv_pci1723_pci_table);

-static int __init driver_pci1723_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_pci1723);
-	if (retval < 0)
-		return retval;
-
-	driver_pci1723_pci_driver.name = (char *)driver_pci1723.driver_name;
-	return pci_register_driver(&driver_pci1723_pci_driver);
-}
-
-static void __exit driver_pci1723_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_pci1723_pci_driver);
-	comedi_driver_unregister(&driver_pci1723);
-}
-
-module_init(driver_pci1723_init_module);
-module_exit(driver_pci1723_cleanup_module);
+static struct pci_driver adv_pci1723_pci_driver = {
+	.name		= "adv_pci1723",
+	.id_table	= adv_pci1723_pci_table,
+	.probe		= adv_pci1723_pci_probe,
+	.remove		= __devexit_p(adv_pci1723_pci_remove),
+};
+module_comedi_pci_driver(adv_pci1723_driver, adv_pci1723_pci_driver);

 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
--- a/drivers/staging/comedi/drivers/adv_pci_dio.c
+++ b/drivers/staging/comedi/drivers/adv_pci_dio.c
@ -237,10 +237,6 @@ enum hw_io_access {

 #define OMBCMD_RETRY	0x03	/* 3 times try request before error */

-static int pci_dio_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pci_dio_detach(struct comedi_device *dev);
-
 struct diosubd_data {
 	int chans;		/*  num of chans */
 	int addr;		/*  PCI address ofset */
@ -263,26 +259,6 @@ struct dio_boardtype {
 	enum hw_io_access io_access;
 };

-static DEFINE_PCI_DEVICE_TABLE(pci_dio_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1730) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1733) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1734) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1735) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1736) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1739) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1750) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1751) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1752) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1753) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1754) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1756) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1760) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1762) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci_dio_pci_table);
-
 static const struct dio_boardtype boardtypes[] = {
 	{"pci1730", PCI_VENDOR_ID_ADVANTECH, 0x1730, PCIDIO_MAINREG,
 	 TYPE_PCI1730,
@ -406,15 +382,6 @@ static const struct dio_boardtype boardtypes[] = {
 	 IO_16b}
 };

-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct dio_boardtype))
-
-static struct comedi_driver driver_pci_dio = {
-	.driver_name = "adv_pci_dio",
-	.module = THIS_MODULE,
-	.attach = pci_dio_attach,
-	.detach = pci_dio_detach
-};
-
 struct pci_dio_private {
 	struct pci_dio_private *prev;	/*  previous private struct */
 	struct pci_dio_private *next;	/*  next private struct */
@ -1116,9 +1083,6 @@ static int CheckAndAllocCard(struct comedi_device *dev,
 	return 1;
 }

-/*
-==============================================================================
-*/
 static int pci_dio_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it)
 {
@ -1134,7 +1098,7 @@ static int pci_dio_attach(struct comedi_device *dev,

 	for_each_pci_dev(pcidev) {
 		/*  loop through cards supported by this driver */
-		for (i = 0; i < n_boardtypes; ++i) {
+		for (i = 0; i < ARRAY_SIZE(boardtypes); ++i) {
 			if (boardtypes[i].vendor_id != pcidev->vendor)
 				continue;
 			if (boardtypes[i].device_id != pcidev->device)
@ -1162,7 +1126,7 @@ static int pci_dio_attach(struct comedi_device *dev,
 		return -EIO;
 	}

-	if (comedi_pci_enable(pcidev, driver_pci_dio.driver_name)) {
+	if (comedi_pci_enable(pcidev, dev->driver->driver_name)) {
 		dev_err(dev->hw_dev, "Error: Can't enable PCI device and request regions!\n");
 		return -EIO;
 	}
@ -1246,10 +1210,7 @@ static int pci_dio_attach(struct comedi_device *dev,
 	return 0;
 }

-/*
-==============================================================================
-*/
-static int pci_dio_detach(struct comedi_device *dev)
+static void pci_dio_detach(struct comedi_device *dev)
 {
 	int i, j;
 	struct comedi_subdevice *s;
@ -1258,20 +1219,14 @@ static int pci_dio_detach(struct comedi_device *dev)
 	if (dev->private) {
 		if (devpriv->valid)
 			pci_dio_reset(dev);
-
-
-		/* This shows the silliness of using this kind of
-		 * scheme for numbering subdevices.  Don't do it.  --ds */
 		subdev = 0;
 		for (i = 0; i < MAX_DI_SUBDEVS; i++) {
 			if (this_board->sdi[i].chans)
 				subdev++;
-
 		}
 		for (i = 0; i < MAX_DO_SUBDEVS; i++) {
 			if (this_board->sdo[i].chans)
 				subdev++;
-
 		}
 		for (i = 0; i < MAX_DIO_SUBDEVG; i++) {
 			for (j = 0; j < this_board->sdio[i].regs; j++) {
@ -1280,82 +1235,73 @@ static int pci_dio_detach(struct comedi_device *dev)
 				subdev++;
 			}
 		}
-
 		if (this_board->boardid.chans)
 			subdev++;
-
 		for (i = 0; i < MAX_8254_SUBDEVS; i++)
 			if (this_board->s8254[i].chans)
 				subdev++;
-
 		for (i = 0; i < dev->n_subdevices; i++) {
 			s = dev->subdevices + i;
 			s->private = NULL;
 		}
-
 		if (devpriv->pcidev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pcidev);
-
 			pci_dev_put(devpriv->pcidev);
 		}
-
 		if (devpriv->prev)
 			devpriv->prev->next = devpriv->next;
 		else
 			pci_priv = devpriv->next;
-
 		if (devpriv->next)
 			devpriv->next->prev = devpriv->prev;
-
 	}
-
-	return 0;
 }

-/*
-==============================================================================
-*/
-static int __devinit driver_pci_dio_pci_probe(struct pci_dev *dev,
-					      const struct pci_device_id *ent)
+static struct comedi_driver adv_pci_dio_driver = {
+	.driver_name	= "adv_pci_dio",
+	.module		= THIS_MODULE,
+	.attach		= pci_dio_attach,
+	.detach		= pci_dio_detach
+};
+
+static int __devinit adv_pci_dio_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_pci_dio.driver_name);
+	return comedi_pci_auto_config(dev, &adv_pci_dio_driver);
 }

-static void __devexit driver_pci_dio_pci_remove(struct pci_dev *dev)
+static void __devexit adv_pci_dio_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }

-static struct pci_driver driver_pci_dio_pci_driver = {
-	.id_table = pci_dio_pci_table,
-	.probe = &driver_pci_dio_pci_probe,
-	.remove = __devexit_p(&driver_pci_dio_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(adv_pci_dio_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1730) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1733) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1734) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1735) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1736) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1739) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1750) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1751) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1752) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1753) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1754) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1756) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1760) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1762) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, adv_pci_dio_pci_table);

-static int __init driver_pci_dio_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_pci_dio);
-	if (retval < 0)
-		return retval;
-
-	driver_pci_dio_pci_driver.name = (char *)driver_pci_dio.driver_name;
-	return pci_register_driver(&driver_pci_dio_pci_driver);
-}
-
-static void __exit driver_pci_dio_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_pci_dio_pci_driver);
-	comedi_driver_unregister(&driver_pci_dio);
-}
-
-module_init(driver_pci_dio_init_module);
-module_exit(driver_pci_dio_cleanup_module);
-/*
-==============================================================================
-*/
+static struct pci_driver adv_pci_dio_pci_driver = {
+	.name		= "adv_pci_dio",
+	.id_table	= adv_pci_dio_pci_table,
+	.probe		= adv_pci_dio_pci_probe,
+	.remove		= __devexit_p(adv_pci_dio_pci_remove),
+};
+module_comedi_pci_driver(adv_pci_dio_driver, adv_pci_dio_pci_driver);

 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
--- a/drivers/staging/comedi/drivers/aio_aio12_8.c
+++ b/drivers/staging/comedi/drivers/aio_aio12_8.c
@ -209,36 +209,23 @@ static int aio_aio12_8_attach(struct comedi_device *dev,
 	return 0;
 }

-static int aio_aio12_8_detach(struct comedi_device *dev)
+static void aio_aio12_8_detach(struct comedi_device *dev)
 {
 	subdev_8255_cleanup(dev, &dev->subdevices[2]);
 	if (dev->iobase)
 		release_region(dev->iobase, 24);
-	return 0;
 }

-static struct comedi_driver driver_aio_aio12_8 = {
-	.driver_name = "aio_aio12_8",
-	.module = THIS_MODULE,
-	.attach = aio_aio12_8_attach,
-	.detach = aio_aio12_8_detach,
-	.board_name = &board_types[0].name,
-	.num_names = 1,
-	.offset = sizeof(struct aio12_8_boardtype),
+static struct comedi_driver aio_aio12_8_driver = {
+	.driver_name	= "aio_aio12_8",
+	.module		= THIS_MODULE,
+	.attach		= aio_aio12_8_attach,
+	.detach		= aio_aio12_8_detach,
+	.board_name	= &board_types[0].name,
+	.num_names	= ARRAY_SIZE(board_types),
+	.offset		= sizeof(struct aio12_8_boardtype),
 };
-
-static int __init driver_aio_aio12_8_init_module(void)
-{
-	return comedi_driver_register(&driver_aio_aio12_8);
-}
-
-static void __exit driver_aio_aio12_8_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_aio_aio12_8);
-}
-
-module_init(driver_aio_aio12_8_init_module);
-module_exit(driver_aio_aio12_8_cleanup_module);
+module_comedi_driver(aio_aio12_8_driver);

 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
--- a/drivers/staging/comedi/drivers/aio_iiro_16.c
+++ b/drivers/staging/comedi/drivers/aio_iiro_16.c
@ -67,30 +67,41 @@ struct aio_iiro_16_private {

 #define	devpriv	((struct aio_iiro_16_private *) dev->private)

-static int aio_iiro_16_attach(struct comedi_device *dev,
-			      struct comedi_devconfig *it);
+static int aio_iiro_16_dio_insn_bits_write(struct comedi_device *dev,
+					   struct comedi_subdevice *s,
+					   struct comedi_insn *insn,
+					   unsigned int *data)
+{
+	if (insn->n != 2)
+		return -EINVAL;

-static int aio_iiro_16_detach(struct comedi_device *dev);
+	if (data[0]) {
+		s->state &= ~data[0];
+		s->state |= data[0] & data[1];
+		outb(s->state & 0xff, dev->iobase + AIO_IIRO_16_RELAY_0_7);
+		outb((s->state >> 8) & 0xff,
+		     dev->iobase + AIO_IIRO_16_RELAY_8_15);
+	}

-static struct comedi_driver driver_aio_iiro_16 = {
-	.driver_name = "aio_iiro_16",
-	.module = THIS_MODULE,
-	.attach = aio_iiro_16_attach,
-	.detach = aio_iiro_16_detach,
-	.board_name = &aio_iiro_16_boards[0].name,
-	.offset = sizeof(struct aio_iiro_16_board),
-	.num_names = ARRAY_SIZE(aio_iiro_16_boards),
-};
+	data[1] = s->state;
+
+	return 2;
+}

 static int aio_iiro_16_dio_insn_bits_read(struct comedi_device *dev,
 					  struct comedi_subdevice *s,
 					  struct comedi_insn *insn,
-					  unsigned int *data);
+					  unsigned int *data)
+{
+	if (insn->n != 2)
+		return -EINVAL;

-static int aio_iiro_16_dio_insn_bits_write(struct comedi_device *dev,
-					   struct comedi_subdevice *s,
-					   struct comedi_insn *insn,
-					   unsigned int *data);
+	data[1] = 0;
+	data[1] |= inb(dev->iobase + AIO_IIRO_16_INPUT_0_7);
+	data[1] |= inb(dev->iobase + AIO_IIRO_16_INPUT_8_15) << 8;
+
+	return 2;
+}

 static int aio_iiro_16_attach(struct comedi_device *dev,
 			      struct comedi_devconfig *it)
@ -138,64 +149,22 @@ static int aio_iiro_16_attach(struct comedi_device *dev,
 	return 1;
 }

-static int aio_iiro_16_detach(struct comedi_device *dev)
+static void aio_iiro_16_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: aio_iiro_16: remove\n", dev->minor);
-
 	if (dev->iobase)
 		release_region(dev->iobase, AIO_IIRO_16_SIZE);
-
-	return 0;
 }

-static int aio_iiro_16_dio_insn_bits_write(struct comedi_device *dev,
-					   struct comedi_subdevice *s,
-					   struct comedi_insn *insn,
-					   unsigned int *data)
-{
-	if (insn->n != 2)
-		return -EINVAL;
-
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= data[0] & data[1];
-		outb(s->state & 0xff, dev->iobase + AIO_IIRO_16_RELAY_0_7);
-		outb((s->state >> 8) & 0xff,
-		     dev->iobase + AIO_IIRO_16_RELAY_8_15);
-	}
-
-	data[1] = s->state;
-
-	return 2;
-}
-
-static int aio_iiro_16_dio_insn_bits_read(struct comedi_device *dev,
-					  struct comedi_subdevice *s,
-					  struct comedi_insn *insn,
-					  unsigned int *data)
-{
-	if (insn->n != 2)
-		return -EINVAL;
-
-	data[1] = 0;
-	data[1] |= inb(dev->iobase + AIO_IIRO_16_INPUT_0_7);
-	data[1] |= inb(dev->iobase + AIO_IIRO_16_INPUT_8_15) << 8;
-
-	return 2;
-}
-
-static int __init driver_aio_iiro_16_init_module(void)
-{
-	return comedi_driver_register(&driver_aio_iiro_16);
-}
-
-static void __exit driver_aio_iiro_16_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_aio_iiro_16);
-}
-
-module_init(driver_aio_iiro_16_init_module);
-module_exit(driver_aio_iiro_16_cleanup_module);
+static struct comedi_driver aio_iiro_16_driver = {
+	.driver_name	= "aio_iiro_16",
+	.module		= THIS_MODULE,
+	.attach		= aio_iiro_16_attach,
+	.detach		= aio_iiro_16_detach,
+	.board_name	= &aio_iiro_16_boards[0].name,
+	.offset		= sizeof(struct aio_iiro_16_board),
+	.num_names	= ARRAY_SIZE(aio_iiro_16_boards),
+};
+module_comedi_driver(aio_iiro_16_driver);

 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
--- a/drivers/staging/comedi/drivers/amplc_dio200.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200.c
@ -217,6 +217,14 @@ order they appear in the channel list.

 #define DIO200_DRIVER_NAME	"amplc_dio200"

+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA_MODULE
+#define CONFIG_COMEDI_AMPLC_DIO200_ISA
+#endif
+
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI_MODULE
+#define CONFIG_COMEDI_AMPLC_DIO200_PCI
+#endif
+
 /* PCI IDs */
 #define PCI_VENDOR_ID_AMPLICON 0x14dc
 #define PCI_DEVICE_ID_AMPLICON_PCI272 0x000a
@ -274,10 +282,14 @@ enum dio200_model {
 };

 enum dio200_layout {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	pc212_layout,
 	pc214_layout,
+#endif
 	pc215_layout,
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	pc218_layout,
+#endif
 	pc272_layout
 };

@ -290,6 +302,7 @@ struct dio200_board {
 };

 static const struct dio200_board dio200_boards[] = {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	{
 	 .name = "pc212e",
 	 .bustype = isa_bustype,
@ -308,15 +321,6 @@ static const struct dio200_board dio200_boards[] = {
 	 .model = pc215e_model,
 	 .layout = pc215_layout,
 	 },
-#ifdef CONFIG_COMEDI_PCI
-	{
-	 .name = "pci215",
-	 .devid = PCI_DEVICE_ID_AMPLICON_PCI215,
-	 .bustype = pci_bustype,
-	 .model = pci215_model,
-	 .layout = pc215_layout,
-	 },
-#endif
 	{
 	 .name = "pc218e",
 	 .bustype = isa_bustype,
@ -329,7 +333,15 @@ static const struct dio200_board dio200_boards[] = {
 	 .model = pc272e_model,
 	 .layout = pc272_layout,
 	 },
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
+	{
+	 .name = "pci215",
+	 .devid = PCI_DEVICE_ID_AMPLICON_PCI215,
+	 .bustype = pci_bustype,
+	 .model = pci215_model,
+	 .layout = pc215_layout,
+	 },
 	{
 	 .name = "pci272",
 	 .devid = PCI_DEVICE_ID_AMPLICON_PCI272,
@ -337,8 +349,6 @@ static const struct dio200_board dio200_boards[] = {
 	 .model = pci272_model,
 	 .layout = pc272_layout,
 	 },
-#endif
-#ifdef CONFIG_COMEDI_PCI
 	{
 	 .name = DIO200_DRIVER_NAME,
 	 .devid = PCI_DEVICE_ID_INVALID,
@ -367,6 +377,7 @@ struct dio200_layout_struct {
 };

 static const struct dio200_layout_struct dio200_layouts[] = {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	[pc212_layout] = {
 			  .n_subdevs = 6,
 			  .sdtype = {sd_8255, sd_8254, sd_8254, sd_8254,
@ -385,6 +396,7 @@ static const struct dio200_layout_struct dio200_layouts[] = {
 			  .has_int_sce = 0,
 			  .has_clk_gat_sce = 0,
 			  },
+#endif
 	[pc215_layout] = {
 			  .n_subdevs = 5,
 			  .sdtype = {sd_8255, sd_8255, sd_8254,
@ -394,6 +406,7 @@ static const struct dio200_layout_struct dio200_layouts[] = {
 			  .has_int_sce = 1,
 			  .has_clk_gat_sce = 1,
 			  },
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	[pc218_layout] = {
 			  .n_subdevs = 7,
 			  .sdtype = {sd_8254, sd_8254, sd_8255, sd_8254,
@ -405,6 +418,7 @@ static const struct dio200_layout_struct dio200_layouts[] = {
 			  .has_int_sce = 1,
 			  .has_clk_gat_sce = 1,
 			  },
+#endif
 	[pc272_layout] = {
 			  .n_subdevs = 4,
 			  .sdtype = {sd_8255, sd_8255, sd_8255,
@ -419,7 +433,7 @@ static const struct dio200_layout_struct dio200_layouts[] = {
 * PCI driver table.
 */

-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 static DEFINE_PCI_DEVICE_TABLE(dio200_pci_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI215) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI272) },
@ -427,7 +441,7 @@ static DEFINE_PCI_DEVICE_TABLE(dio200_pci_table) = {
 };

 MODULE_DEVICE_TABLE(pci, dio200_pci_table);
-#endif /* CONFIG_COMEDI_PCI */
+#endif /* CONFIG_COMEDI_AMPLC_DIO200_PCI */

 /*
 * Useful for shorthand access to the particular board structure
@ -441,7 +455,7 @@ MODULE_DEVICE_TABLE(pci, dio200_pci_table);
   feel free to suggest moving the variable to the struct comedi_device struct.
 */
 struct dio200_private {
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 	struct pci_dev *pci_dev;	/* PCI device */
 #endif
 	int intr_sd;
@ -479,7 +493,7 @@ struct dio200_subdev_intr {
 */
 static int dio200_attach(struct comedi_device *dev,
 			 struct comedi_devconfig *it);
-static int dio200_detach(struct comedi_device *dev);
+static void dio200_detach(struct comedi_device *dev);
 static struct comedi_driver driver_amplc_dio200 = {
 	.driver_name = DIO200_DRIVER_NAME,
 	.module = THIS_MODULE,
@ -490,12 +504,12 @@ static struct comedi_driver driver_amplc_dio200 = {
 	.num_names = ARRAY_SIZE(dio200_boards),
 };

-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 static int __devinit driver_amplc_dio200_pci_probe(struct pci_dev *dev,
 						   const struct pci_device_id
 						   *ent)
 {
-	return comedi_pci_auto_config(dev, driver_amplc_dio200.driver_name);
+	return comedi_pci_auto_config(dev, &driver_amplc_dio200);
 }

 static void __devexit driver_amplc_dio200_pci_remove(struct pci_dev *dev)
@ -549,7 +563,7 @@ module_exit(driver_amplc_dio200_cleanup_module);
 * This function looks for a PCI device matching the requested board name,
 * bus and slot.
 */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 static int
 dio200_find_pci(struct comedi_device *dev, int bus, int slot,
 		struct pci_dev **pci_dev_p)
@ -611,6 +625,7 @@ dio200_find_pci(struct comedi_device *dev, int bus, int slot,
 * This function checks and requests an I/O region, reporting an error
 * if there is a conflict.
 */
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 static int
 dio200_request_region(unsigned minor, unsigned long from, unsigned long extent)
 {
@ -621,6 +636,7 @@ dio200_request_region(unsigned minor, unsigned long from, unsigned long extent)
 	}
 	return 0;
 }
+#endif

 /*
 * 'insn_bits' function for an 'INTERRUPT' subdevice.
@ -1332,7 +1348,7 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	struct comedi_subdevice *s;
 	unsigned long iobase = 0;
 	unsigned int irq = 0;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 	struct pci_dev *pci_dev = NULL;
 	int bus = 0, slot = 0;
 #endif
@ -1354,12 +1370,14 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)

 	/* Process options. */
 	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	case isa_bustype:
 		iobase = it->options[0];
 		irq = it->options[1];
 		share_irq = 0;
 		break;
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 	case pci_bustype:
 		bus = it->options[0];
 		slot = it->options[1];
@ -1382,7 +1400,7 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	devpriv->intr_sd = -1;

 	/* Enable device and reserve I/O spaces. */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 	if (pci_dev) {
 		ret = comedi_pci_enable(pci_dev, DIO200_DRIVER_NAME);
 		if (ret < 0) {
@ -1396,9 +1414,11 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	} else
 #endif
 	{
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 		ret = dio200_request_region(dev->minor, iobase, DIO200_IO_SIZE);
 		if (ret < 0)
 			return ret;
+#endif
 	}
 	dev->iobase = iobase;

@ -1474,12 +1494,19 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	}

 	printk(KERN_INFO "comedi%d: %s ", dev->minor, dev->board_name);
-	if (thisboard->bustype == isa_bustype) {
+	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
+	case isa_bustype:
 		printk("(base %#lx) ", iobase);
-	} else {
-#ifdef CONFIG_COMEDI_PCI
-		printk("(pci %s) ", pci_name(pci_dev));
+		break;
 #endif
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
+	case pci_bustype:
+		printk("(pci %s) ", pci_name(pci_dev));
+		break;
+#endif
+	default:
+		break;
 	}
 	if (irq)
 		printk("(irq %u%s) ", irq, (dev->irq ? "" : " UNAVAILABLE"));
@ -1491,22 +1518,11 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 1;
 }

-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int dio200_detach(struct comedi_device *dev)
+static void dio200_detach(struct comedi_device *dev)
 {
 	const struct dio200_layout_struct *layout;
 	unsigned n;

-	printk(KERN_DEBUG "comedi%d: %s: detach\n", dev->minor,
-	       DIO200_DRIVER_NAME);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
 	if (dev->subdevices) {
@ -1529,7 +1545,7 @@ static int dio200_detach(struct comedi_device *dev)
 		}
 	}
 	if (devpriv) {
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 		if (devpriv->pci_dev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pci_dev);
@ -1537,15 +1553,12 @@ static int dio200_detach(struct comedi_device *dev)
 		} else
 #endif
 		{
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 			if (dev->iobase)
 				release_region(dev->iobase, DIO200_IO_SIZE);
+#endif
 		}
 	}
-	if (dev->board_name)
-		printk(KERN_INFO "comedi%d: %s removed\n",
-		       dev->minor, dev->board_name);
-
-	return 0;
 }

 MODULE_AUTHOR("Comedi http://www.comedi.org");
--- a/drivers/staging/comedi/drivers/amplc_pc236.c
+++ b/drivers/staging/comedi/drivers/amplc_pc236.c
@ -63,6 +63,14 @@ unused.

 #define PC236_DRIVER_NAME	"amplc_pc236"

+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA_MODULE
+#define CONFIG_COMEDI_AMPLC_PC236_ISA
+#endif
+
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI_MODULE
+#define CONFIG_COMEDI_AMPLC_PC236_PCI
+#endif
+
 /* PCI236 PCI configuration register information */
 #define PCI_VENDOR_ID_AMPLICON 0x14dc
 #define PCI_DEVICE_ID_AMPLICON_PCI236 0x0009
@ -106,13 +114,15 @@ struct pc236_board {
 	enum pc236_model model;
 };
 static const struct pc236_board pc236_boards[] = {
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 	{
 	 .name = "pc36at",
 	 .fancy_name = "PC36AT",
 	 .bustype = isa_bustype,
 	 .model = pc36at_model,
 	 },
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	{
 	 .name = "pci236",
 	 .fancy_name = "PCI236",
@ -120,8 +130,6 @@ static const struct pc236_board pc236_boards[] = {
 	 .bustype = pci_bustype,
 	 .model = pci236_model,
 	 },
-#endif
-#ifdef CONFIG_COMEDI_PCI
 	{
 	 .name = PC236_DRIVER_NAME,
 	 .fancy_name = PC236_DRIVER_NAME,
@ -132,14 +140,14 @@ static const struct pc236_board pc236_boards[] = {
 #endif
 };

-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 static DEFINE_PCI_DEVICE_TABLE(pc236_pci_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI236) },
 	{0}
 };

 MODULE_DEVICE_TABLE(pci, pc236_pci_table);
-#endif /* CONFIG_COMEDI_PCI */
+#endif /* CONFIG_COMEDI_AMPLC_PC236_PCI */

 /*
 * Useful for shorthand access to the particular board structure
@ -151,7 +159,7 @@ MODULE_DEVICE_TABLE(pci, pc236_pci_table);
   feel free to suggest moving the variable to the struct comedi_device struct.
 */
 struct pc236_private {
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	/* PCI device */
 	struct pci_dev *pci_dev;
 	unsigned long lcr_iobase; /* PLX PCI9052 config registers in PCIBAR1 */
@ -168,7 +176,7 @@ struct pc236_private {
 * the device code.
 */
 static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int pc236_detach(struct comedi_device *dev);
+static void pc236_detach(struct comedi_device *dev);
 static struct comedi_driver driver_amplc_pc236 = {
 	.driver_name = PC236_DRIVER_NAME,
 	.module = THIS_MODULE,
@ -179,12 +187,12 @@ static struct comedi_driver driver_amplc_pc236 = {
 	.num_names = ARRAY_SIZE(pc236_boards),
 };

-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 static int __devinit driver_amplc_pc236_pci_probe(struct pci_dev *dev,
 						  const struct pci_device_id
 						  *ent)
 {
-	return comedi_pci_auto_config(dev, driver_amplc_pc236.driver_name);
+	return comedi_pci_auto_config(dev, &driver_amplc_pc236);
 }

 static void __devexit driver_amplc_pc236_pci_remove(struct pci_dev *dev)
@ -234,8 +242,10 @@ module_init(driver_amplc_pc236_init_module);
 module_exit(driver_amplc_pc236_cleanup_module);
 #endif

+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 static int pc236_request_region(unsigned minor, unsigned long from,
 				unsigned long extent);
+#endif
 static void pc236_intr_disable(struct comedi_device *dev);
 static void pc236_intr_enable(struct comedi_device *dev);
 static int pc236_intr_check(struct comedi_device *dev);
@ -255,7 +265,7 @@ static irqreturn_t pc236_interrupt(int irq, void *d);
 * This function looks for a PCI device matching the requested board name,
 * bus and slot.
 */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 static int
 pc236_find_pci(struct comedi_device *dev, int bus, int slot,
 	       struct pci_dev **pci_dev_p)
@ -324,7 +334,7 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	struct comedi_subdevice *s;
 	unsigned long iobase = 0;
 	unsigned int irq = 0;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	struct pci_dev *pci_dev = NULL;
 	int bus = 0, slot = 0;
 #endif
@ -345,12 +355,14 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	}
 	/* Process options. */
 	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 	case isa_bustype:
 		iobase = it->options[0];
 		irq = it->options[1];
 		share_irq = 0;
 		break;
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	case pci_bustype:
 		bus = it->options[0];
 		slot = it->options[1];
@ -361,7 +373,7 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			return ret;
 		devpriv->pci_dev = pci_dev;
 		break;
-#endif /* CONFIG_COMEDI_PCI */
+#endif
 	default:
 		printk(KERN_ERR
 		       "comedi%d: %s: BUG! cannot determine board type!\n",
@ -376,7 +388,7 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	dev->board_name = thisboard->name;

 	/* Enable device and reserve I/O spaces. */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	if (pci_dev) {

 		ret = comedi_pci_enable(pci_dev, PC236_DRIVER_NAME);
@ -392,9 +404,11 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	} else
 #endif
 	{
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 		ret = pc236_request_region(dev->minor, iobase, PC236_IO_SIZE);
 		if (ret < 0)
 			return ret;
+#endif
 	}
 	dev->iobase = iobase;

@ -439,12 +453,19 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		}
 	}
 	printk(KERN_INFO "comedi%d: %s ", dev->minor, dev->board_name);
-	if (thisboard->bustype == isa_bustype) {
+	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
+	case isa_bustype:
 		printk("(base %#lx) ", iobase);
-	} else {
-#ifdef CONFIG_COMEDI_PCI
-		printk("(pci %s) ", pci_name(pci_dev));
+		break;
 #endif
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
+	case pci_bustype:
+		printk("(pci %s) ", pci_name(pci_dev));
+		break;
+#endif
+	default:
+		break;
 	}
 	if (irq)
 		printk("(irq %u%s) ", irq, (dev->irq ? "" : " UNAVAILABLE"));
@ -456,27 +477,16 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 1;
 }

-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int pc236_detach(struct comedi_device *dev)
+static void pc236_detach(struct comedi_device *dev)
 {
-	printk(KERN_DEBUG "comedi%d: %s: detach\n", dev->minor,
-	       PC236_DRIVER_NAME);
 	if (devpriv)
 		pc236_intr_disable(dev);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
 	if (dev->subdevices)
 		subdev_8255_cleanup(dev, dev->subdevices + 0);
 	if (devpriv) {
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 		if (devpriv->pci_dev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pci_dev);
@ -484,21 +494,19 @@ static int pc236_detach(struct comedi_device *dev)
 		} else
 #endif
 		{
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 			if (dev->iobase)
 				release_region(dev->iobase, PC236_IO_SIZE);
+#endif
 		}
 	}
-	if (dev->board_name) {
-		printk(KERN_INFO "comedi%d: %s removed\n",
-		       dev->minor, dev->board_name);
-	}
-	return 0;
 }

 /*
 * This function checks and requests an I/O region, reporting an error
 * if there is a conflict.
 */
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 static int pc236_request_region(unsigned minor, unsigned long from,
 				unsigned long extent)
 {
@ -509,6 +517,7 @@ static int pc236_request_region(unsigned minor, unsigned long from,
 	}
 	return 0;
 }
+#endif

 /*
 * This function is called to mark the interrupt as disabled (no command
@ -521,7 +530,7 @@ static void pc236_intr_disable(struct comedi_device *dev)

 	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->enable_irq = 0;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	if (devpriv->lcr_iobase)
 		outl(PCI236_INTR_DISABLE, devpriv->lcr_iobase + PLX9052_INTCSR);
 #endif
@ -539,7 +548,7 @@ static void pc236_intr_enable(struct comedi_device *dev)

 	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->enable_irq = 1;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	if (devpriv->lcr_iobase)
 		outl(PCI236_INTR_ENABLE, devpriv->lcr_iobase + PLX9052_INTCSR);
 #endif
@ -561,7 +570,7 @@ static int pc236_intr_check(struct comedi_device *dev)
 	spin_lock_irqsave(&dev->spinlock, flags);
 	if (devpriv->enable_irq) {
 		retval = 1;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 		if (devpriv->lcr_iobase) {
 			if ((inl(devpriv->lcr_iobase + PLX9052_INTCSR)
 			     & PLX9052_INTCSR_LI1STAT_MASK)
--- a/drivers/staging/comedi/drivers/amplc_pc263.c
+++ b/drivers/staging/comedi/drivers/amplc_pc263.c
@ -50,6 +50,14 @@ The state of the outputs can be read.

 #define PC263_DRIVER_NAME	"amplc_pc263"

+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA_MODULE
+#define CONFIG_COMEDI_AMPLC_PC263_ISA
+#endif
+
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI_MODULE
+#define CONFIG_COMEDI_AMPLC_PC263_PCI
+#endif
+
 /* PCI263 PCI configuration register information */
 #define PCI_VENDOR_ID_AMPLICON 0x14dc
 #define PCI_DEVICE_ID_AMPLICON_PCI263 0x000c
@ -73,13 +81,15 @@ struct pc263_board {
 	enum pc263_model model;
 };
 static const struct pc263_board pc263_boards[] = {
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 	{
 	 .name = "pc263",
 	 .fancy_name = "PC263",
 	 .bustype = isa_bustype,
 	 .model = pc263_model,
 	 },
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	{
 	 .name = "pci263",
 	 .fancy_name = "PCI263",
@ -87,8 +97,6 @@ static const struct pc263_board pc263_boards[] = {
 	 .bustype = pci_bustype,
 	 .model = pci263_model,
 	 },
-#endif
-#ifdef CONFIG_COMEDI_PCI
 	{
 	 .name = PC263_DRIVER_NAME,
 	 .fancy_name = PC263_DRIVER_NAME,
@ -99,14 +107,14 @@ static const struct pc263_board pc263_boards[] = {
 #endif
 };

-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 static DEFINE_PCI_DEVICE_TABLE(pc263_pci_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI263) },
 	{0}
 };

 MODULE_DEVICE_TABLE(pci, pc263_pci_table);
-#endif /* CONFIG_COMEDI_PCI */
+#endif /* CONFIG_COMEDI_AMPLC_PC263_PCI */

 /*
 * Useful for shorthand access to the particular board structure
@ -117,14 +125,14 @@ MODULE_DEVICE_TABLE(pci, pc263_pci_table);
   several hardware drivers keep similar information in this structure,
   feel free to suggest moving the variable to the struct comedi_device struct.
 */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 struct pc263_private {
 	/* PCI device. */
 	struct pci_dev *pci_dev;
 };

 #define devpriv ((struct pc263_private *)dev->private)
-#endif /* CONFIG_COMEDI_PCI */
+#endif /* CONFIG_COMEDI_AMPLC_PC263_PCI */

 /*
 * The struct comedi_driver structure tells the Comedi core module
@ -133,7 +141,7 @@ struct pc263_private {
 * the device code.
 */
 static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int pc263_detach(struct comedi_device *dev);
+static void pc263_detach(struct comedi_device *dev);
 static struct comedi_driver driver_amplc_pc263 = {
 	.driver_name = PC263_DRIVER_NAME,
 	.module = THIS_MODULE,
@ -144,8 +152,10 @@ static struct comedi_driver driver_amplc_pc263 = {
 	.num_names = ARRAY_SIZE(pc263_boards),
 };

+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 static int pc263_request_region(unsigned minor, unsigned long from,
 				unsigned long extent);
+#endif
 static int pc263_dio_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
 			       struct comedi_insn *insn, unsigned int *data);
@ -157,7 +167,7 @@ static int pc263_dio_insn_config(struct comedi_device *dev,
 * This function looks for a PCI device matching the requested board name,
 * bus and slot.
 */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 static int
 pc263_find_pci(struct comedi_device *dev, int bus, int slot,
 	       struct pci_dev **pci_dev_p)
@ -225,7 +235,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase = 0;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	struct pci_dev *pci_dev = NULL;
 	int bus = 0, slot = 0;
 #endif
@ -237,7 +247,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 * Allocate the private structure area.  alloc_private() is a
 * convenient macro defined in comedidev.h.
 */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	ret = alloc_private(dev, sizeof(struct pc263_private));
 	if (ret < 0) {
 		printk(KERN_ERR "comedi%d: error! out of memory!\n",
@ -247,10 +257,12 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 #endif
 	/* Process options. */
 	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 	case isa_bustype:
 		iobase = it->options[0];
 		break;
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	case pci_bustype:
 		bus = it->options[0];
 		slot = it->options[1];
@ -260,7 +272,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			return ret;
 		devpriv->pci_dev = pci_dev;
 		break;
-#endif /* CONFIG_COMEDI_PCI */
+#endif
 	default:
 		printk(KERN_ERR
 		       "comedi%d: %s: BUG! cannot determine board type!\n",
@ -275,7 +287,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	dev->board_name = thisboard->name;

 	/* Enable device and reserve I/O spaces. */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	if (pci_dev) {
 		ret = comedi_pci_enable(pci_dev, PC263_DRIVER_NAME);
 		if (ret < 0) {
@ -289,9 +301,11 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	} else
 #endif
 	{
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 		ret = pc263_request_region(dev->minor, iobase, PC263_IO_SIZE);
 		if (ret < 0)
 			return ret;
+#endif
 	}
 	dev->iobase = iobase;

@ -322,12 +336,18 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	s->state = s->state | (inb(dev->iobase) << 8);

 	printk(KERN_INFO "comedi%d: %s ", dev->minor, dev->board_name);
-	if (thisboard->bustype == isa_bustype) {
+	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
+	case isa_bustype:
 		printk("(base %#lx) ", iobase);
-	} else {
-#ifdef CONFIG_COMEDI_PCI
-		printk("(pci %s) ", pci_name(pci_dev));
+		break;
 #endif
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
+		printk("(pci %s) ", pci_name(pci_dev));
+		break;
+#endif
+	default:
+		break;
 	}

 	printk("attached\n");
@ -335,23 +355,13 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 1;
 }

-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int pc263_detach(struct comedi_device *dev)
+static void pc263_detach(struct comedi_device *dev)
 {
-	printk(KERN_DEBUG "comedi%d: %s: detach\n", dev->minor,
-	       PC263_DRIVER_NAME);
-
-#ifdef CONFIG_COMEDI_PCI
-	if (devpriv) {
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
+	if (devpriv)
 #endif
-#ifdef CONFIG_COMEDI_PCI
+	{
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 		if (devpriv->pci_dev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pci_dev);
@ -359,21 +369,19 @@ static int pc263_detach(struct comedi_device *dev)
 		} else
 #endif
 		{
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 			if (dev->iobase)
 				release_region(dev->iobase, PC263_IO_SIZE);
+#endif
 		}
 	}
-	if (dev->board_name) {
-		printk(KERN_INFO "comedi%d: %s removed\n",
-		       dev->minor, dev->board_name);
-	}
-	return 0;
 }

 /*
 * This function checks and requests an I/O region, reporting an error
 * if there is a conflict.
 */
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 static int pc263_request_region(unsigned minor, unsigned long from,
 				unsigned long extent)
 {
@ -384,6 +392,7 @@ static int pc263_request_region(unsigned minor, unsigned long from,
 	}
 	return 0;
 }
+#endif

 /* DIO devices are slightly special.  Although it is possible to
 * implement the insn_read/insn_write interface, it is much more
@ -429,12 +438,12 @@ static int pc263_dio_insn_config(struct comedi_device *dev,
 * A convenient macro that defines init_module() and cleanup_module(),
 * as necessary.
 */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 static int __devinit driver_amplc_pc263_pci_probe(struct pci_dev *dev,
 						  const struct pci_device_id
 						  *ent)
 {
-	return comedi_pci_auto_config(dev, driver_amplc_pc263.driver_name);
+	return comedi_pci_auto_config(dev, &driver_amplc_pc263);
 }

 static void __devexit driver_amplc_pc263_pci_remove(struct pci_dev *dev)
--- a/Show more
+++ b/Show more