diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt index f7570c240ce8..76ab3e1fe374 100644 --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt @@ -153,7 +153,7 @@ Date: Jan 2020 KernelVersion: 5.5 Contact: Mika Westerberg Description: This attribute reports number of RX lanes the device is - using simultaneusly through its upstream port. + using simultaneously through its upstream port. What: /sys/bus/thunderbolt/devices/.../tx_speed Date: Jan 2020 @@ -167,7 +167,7 @@ Date: Jan 2020 KernelVersion: 5.5 Contact: Mika Westerberg Description: This attribute reports number of TX lanes the device is - using simultaneusly through its upstream port. + using simultaneously through its upstream port. What: /sys/bus/thunderbolt/devices/.../vendor Date: Sep 2017 diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt index c9e392c64a7c..70c813b0755f 100644 --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt @@ -15,10 +15,10 @@ Required properties: - fsl,anatop: phandle for anatop register, it is only for imx6 SoC series Optional properties: -- fsl,tx-cal-45-dn-ohms: Integer [30-55]. Resistance (in ohms) of switchable +- fsl,tx-cal-45-dn-ohms: Integer [35-54]. Resistance (in ohms) of switchable high-speed trimming resistor connected in parallel with the 45 ohm resistor that terminates the DN output signal. Default: 45 -- fsl,tx-cal-45-dp-ohms: Integer [30-55]. Resistance (in ohms) of switchable +- fsl,tx-cal-45-dp-ohms: Integer [35-54]. Resistance (in ohms) of switchable high-speed trimming resistor connected in parallel with the 45 ohm resistor that terminates the DP output signal. Default: 45 - fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml index ee436308e5dc..0e72c08e6566 100644 --- a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml +++ b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml @@ -23,6 +23,8 @@ properties: connector: type: object $ref: ../connector/usb-connector.yaml + unevaluatedProperties: false + description: Properties for usb c connector. diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml index 8b019ac05bbe..a86bcd95100e 100644 --- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml @@ -67,6 +67,7 @@ properties: vhub-strings: type: object + additionalProperties: false properties: '#address-cells': @@ -78,6 +79,7 @@ properties: patternProperties: '^string@[0-9a-f]+$': type: object + additionalProperties: false description: string descriptors of the specific language properties: diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index 1bfbc6ef16eb..dc4988c0009c 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -32,6 +32,7 @@ properties: - enum: - rockchip,px30-usb - rockchip,rk3036-usb + - rockchip,rk3128-usb - rockchip,rk3188-usb - rockchip,rk3228-usb - rockchip,rk3288-usb diff --git a/Documentation/devicetree/bindings/usb/faraday,fotg210.txt b/Documentation/devicetree/bindings/usb/faraday,fotg210.txt deleted file mode 100644 index 06a2286e2054..000000000000 --- a/Documentation/devicetree/bindings/usb/faraday,fotg210.txt +++ /dev/null @@ -1,35 +0,0 @@ -Faraday FOTG Host controller - -This OTG-capable USB host controller is found in Cortina Systems -Gemini and other SoC products. - -Required properties: -- compatible: should be one of: - "faraday,fotg210" - "cortina,gemini-usb", "faraday,fotg210" -- reg: should contain one register range i.e. start and length -- interrupts: description of the interrupt line - -Optional properties: -- clocks: should contain the IP block clock -- clock-names: should be "PCLK" for the IP block clock - -Required properties for "cortina,gemini-usb" compatible: -- syscon: a phandle to the system controller to access PHY registers - -Optional properties for "cortina,gemini-usb" compatible: -- cortina,gemini-mini-b: boolean property that indicates that a Mini-B - OTG connector is in use -- wakeup-source: see power/wakeup-source.txt - -Example for Gemini: - -usb@68000000 { - compatible = "cortina,gemini-usb", "faraday,fotg210"; - reg = <0x68000000 0x1000>; - interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cc 12>; - clock-names = "PCLK"; - syscon = <&syscon>; - wakeup-source; -}; diff --git a/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml b/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml new file mode 100644 index 000000000000..c69bbfbcf733 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2022 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/faraday,fotg210.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Faraday Technology FOTG210 HS OTG USB 2.0 controller Bindings + +maintainers: + - Linus Walleij + +allOf: + - $ref: usb-drd.yaml# + - $ref: usb-hcd.yaml# + +properties: + compatible: + oneOf: + - const: faraday,fotg210 + - items: + - const: cortina,gemini-usb + - const: faraday,fotg210 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: PCLK + + resets: + maxItems: 1 + + syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: a phandle to the global Gemini system controller on + Gemini systems + + dr_mode: true + + phys: + maxItems: 1 + + phy-names: + const: usb2-phy + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + usb0: usb@68000000 { + compatible = "cortina,gemini-usb", "faraday,fotg210"; + reg = <0x68000000 0x1000>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_USB0>; + clocks = <&syscon GEMINI_CLK_GATE_USB0>; + clock-names = "PCLK"; + syscon = <&syscon>; + dr_mode = "host"; + }; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml b/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml new file mode 100644 index 000000000000..72f56cc88457 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/mediatek,mt6370-tcpc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediatTek MT6370 Type-C Port Switch and Power Delivery controller + +maintainers: + - ChiYuan Huang + +description: | + MediaTek MT6370 is a multi-functional device. + It integrates charger, ADC, flash, RGB indicators, + regulators (DSV/VIBLDO), and TypeC Port Switch with Power Delivery controller. + This document only describes MT6370 Type-C Port Switch and + Power Delivery controller. + +properties: + compatible: + enum: + - mediatek,mt6370-tcpc + + interrupts: + maxItems: 1 + + connector: + type: object + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false + +additionalProperties: false + +required: + - compatible + - interrupts diff --git a/Documentation/devicetree/bindings/usb/npcm7xx-usb.txt b/Documentation/devicetree/bindings/usb/npcm7xx-usb.txt index 5a0f1f14fbfa..352a0a1e2f76 100644 --- a/Documentation/devicetree/bindings/usb/npcm7xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/npcm7xx-usb.txt @@ -5,7 +5,9 @@ EHCI: ----- Required properties: -- compatible: "nuvoton,npcm750-ehci" +- compatible: should be one of + "nuvoton,npcm750-ehci" + "nuvoton,npcm845-ehci" - interrupts: Should contain the EHCI interrupt - reg: Physical address and length of the register set for the device diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index cd2f7cb6745a..a6e6abb4dfa9 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -26,6 +26,7 @@ properties: - qcom,sc7280-dwc3 - qcom,sc8280xp-dwc3 - qcom,sdm660-dwc3 + - qcom,sdm670-dwc3 - qcom,sdm845-dwc3 - qcom,sdx55-dwc3 - qcom,sdx65-dwc3 @@ -175,6 +176,7 @@ allOf: - qcom,msm8998-dwc3 - qcom,sc7180-dwc3 - qcom,sc7280-dwc3 + - qcom,sdm670-dwc3 - qcom,sdm845-dwc3 - qcom,sdx55-dwc3 - qcom,sm6350-dwc3 @@ -294,6 +296,7 @@ allOf: compatible: contains: enum: + - qcom,sm6115-dwc3 - qcom,sm6125-dwc3 - qcom,sm8150-dwc3 - qcom,sm8250-dwc3 @@ -344,11 +347,11 @@ allOf: - qcom,msm8994-dwc3 - qcom,qcs404-dwc3 - qcom,sc7180-dwc3 + - qcom,sdm670-dwc3 - qcom,sdm845-dwc3 - qcom,sdx55-dwc3 - qcom,sdx65-dwc3 - qcom,sm4250-dwc3 - - qcom,sm6115-dwc3 - qcom,sm6125-dwc3 - qcom,sm6350-dwc3 - qcom,sm8150-dwc3 @@ -380,6 +383,7 @@ allOf: - qcom,msm8953-dwc3 - qcom,msm8996-dwc3 - qcom,msm8998-dwc3 + - qcom,sm6115-dwc3 then: properties: interrupts: diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml index 9fcf54b10b07..55dfd121b555 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml @@ -11,27 +11,55 @@ maintainers: properties: compatible: - items: - - enum: - - renesas,r8a774a1-usb3-peri # RZ/G2M - - renesas,r8a774b1-usb3-peri # RZ/G2N - - renesas,r8a774c0-usb3-peri # RZ/G2E - - renesas,r8a774e1-usb3-peri # RZ/G2H - - renesas,r8a7795-usb3-peri # R-Car H3 - - renesas,r8a7796-usb3-peri # R-Car M3-W - - renesas,r8a77961-usb3-peri # R-Car M3-W+ - - renesas,r8a77965-usb3-peri # R-Car M3-N - - renesas,r8a77990-usb3-peri # R-Car E3 - - const: renesas,rcar-gen3-usb3-peri + oneOf: + - items: + - enum: + - renesas,r8a774a1-usb3-peri # RZ/G2M + - renesas,r8a774b1-usb3-peri # RZ/G2N + - renesas,r8a774c0-usb3-peri # RZ/G2E + - renesas,r8a774e1-usb3-peri # RZ/G2H + - renesas,r8a7795-usb3-peri # R-Car H3 + - renesas,r8a7796-usb3-peri # R-Car M3-W + - renesas,r8a77961-usb3-peri # R-Car M3-W+ + - renesas,r8a77965-usb3-peri # R-Car M3-N + - renesas,r8a77990-usb3-peri # R-Car E3 + - const: renesas,rcar-gen3-usb3-peri + + - items: + - enum: + - renesas,r9a09g011-usb3-peri # RZ/V2M + - const: renesas,rzv2m-usb3-peri reg: maxItems: 1 interrupts: - maxItems: 1 + minItems: 1 + items: + - description: Combined interrupt for DMA, SYS and ERR + - description: Dual Role Device (DRD) + - description: Battery Charging + - description: Global Purpose Input + + interrupt-names: + minItems: 1 + items: + - const: all_p + - const: drd + - const: bc + - const: gpi clocks: - maxItems: 1 + minItems: 1 + items: + - description: Main clock + - description: Register access clock + + clock-names: + minItems: 1 + items: + - const: aclk + - const: reg phys: maxItems: 1 @@ -43,7 +71,15 @@ properties: maxItems: 1 resets: - maxItems: 1 + minItems: 1 + items: + - description: Peripheral reset + - description: DRD reset + + reset-names: + items: + - const: aresetn_p + - const: drd_reset usb-role-switch: $ref: /schemas/types.yaml#/definitions/flag @@ -78,6 +114,39 @@ required: - interrupts - clocks +allOf: + - if: + properties: + compatible: + contains: + enum: + - renesas,rzv2m-usb3-peri + then: + properties: + clocks: + minItems: 2 + clock-names: + minItems: 2 + interrupts: + minItems: 4 + interrupt-names: + minItems: 4 + resets: + minItems: 2 + required: + - clock-names + - interrupt-names + - resets + - reset-names + else: + properties: + clocks: + maxItems: 1 + interrupts: + maxItems: 1 + resets: + maxItems: 1 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml new file mode 100644 index 000000000000..1999f614c89b --- /dev/null +++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/richtek,rt1711h.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Richtek RT1711H Type-C Port Switch and Power Delivery controller + +maintainers: + - Gene Chen + +description: | + The RT1711H is a USB Type-C controller that complies with the latest + USB Type-C and PD standards. It does the USB Type-C detection including attach + and orientation. It integrates the physical layer of the USB BMC power + delivery protocol to allow up to 100W of power. The BMC PD block enables full + support for alternative interfaces of the Type-C specification. + +properties: + compatible: + enum: + - richtek,rt1711h + - richtek,rt1715 + description: + RT1711H support PD20, RT1715 support PD30 except Fast Role Swap. + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + wakeup-source: + type: boolean + + connector: + type: object + $ref: /schemas/connector/usb-connector.yaml# + description: + Properties for usb c connector. + +additionalProperties: false + +required: + - compatible + - reg + - connector + - interrupts + +examples: + - | + #include + #include + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + rt1711h@4e { + compatible = "richtek,rt1711h"; + reg = <0x4e>; + interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_hs>; + }; + }; + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&usb_ss>; + }; + }; + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dp_aux>; + }; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 1779d08ba1c0..6d78048c4613 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -234,6 +234,18 @@ properties: avoid -EPROTO errors with usbhid on some devices (Hikey 970). type: boolean + snps,gfladj-refclk-lpm-sel-quirk: + description: + When set, run the SOF/ITP counter based on ref_clk. + type: boolean + + snps,resume-hs-terminations: + description: + Fix the issue of HS terminations CRC error on resume by enabling this + quirk. When set, all the termsel, xcvrsel, opmode becomes 0 during end + of resume. This option is to support certain legacy ULPI PHYs. + type: boolean + snps,is-utmi-l1-suspend: description: True when DWC3 asserts output signal utmi_l1_suspend_n, false when diff --git a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml index b5a8c9814dd3..b8974807b666 100644 --- a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml +++ b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml @@ -33,6 +33,7 @@ properties: connector: type: object $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false properties: compatible: @@ -74,9 +75,14 @@ examples: data-role = "dual"; typec-power-opmode = "default"; - port { - typec_con_ep: endpoint { - remote-endpoint = <&usbotg_hs_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + typec_con_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; }; }; }; diff --git a/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml b/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml index c2b2243c7892..5aa4ffd67119 100644 --- a/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml +++ b/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml @@ -28,6 +28,7 @@ properties: connector: type: object $ref: ../connector/usb-connector.yaml# + unevaluatedProperties: false description: The managed USB Type-C connector. Since WUSB3801 does not support Power Delivery, the node should have the "pd-disable" property. diff --git a/Documentation/usb/usbip_protocol.rst b/Documentation/usb/usbip_protocol.rst index 0b8541fda4d8..adc158967cc6 100644 --- a/Documentation/usb/usbip_protocol.rst +++ b/Documentation/usb/usbip_protocol.rst @@ -340,13 +340,12 @@ USBIP_CMD_SUBMIT: | 0 | 20 | usbip_header_basic, 'command' shall be 0x00000001 | +-----------+--------+---------------------------------------------------+ | 0x14 | 4 | transfer_flags: possible values depend on the | -| | | URB transfer_flags (refer to URB doc in | -| | | Documentation/driver-api/usb/URB.rst) | -| | | but with URB_NO_TRANSFER_DMA_MAP masked. Refer to | -| | | function usbip_pack_cmd_submit and function | -| | | tweak_transfer_flags in drivers/usb/usbip/ | -| | | usbip_common.c. The following fields may also ref | -| | | to function usbip_pack_cmd_submit and URB doc | +| | | USBIP_URB transfer_flags. | +| | | Refer to include/uapi/linux/usbip.h and | +| | | Documentation/driver-api/usb/URB.rst. | +| | | Refer to usbip_pack_cmd_submit() and | +| | | tweak_transfer_flags() in drivers/usb/usbip/ | +| | | usbip_common.c. | +-----------+--------+---------------------------------------------------+ | 0x18 | 4 | transfer_buffer_length: | | | | use URB transfer_buffer_length | diff --git a/MAINTAINERS b/MAINTAINERS index 5beeea4fff5d..04b7e12ef719 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5921,10 +5921,9 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git F: drivers/usb/dwc2/ DESIGNWARE USB3 DRD IP DRIVER -M: Felipe Balbi +M: Thinh Nguyen L: linux-usb@vger.kernel.org S: Maintained -T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git F: drivers/usb/dwc3/ DEVANTECH SRF ULTRASONIC RANGER IIO DRIVER diff --git a/arch/arm/mach-s3c/mach-gta02.c b/arch/arm/mach-s3c/mach-gta02.c index abfdce765525..d50a81d85ae1 100644 --- a/arch/arm/mach-s3c/mach-gta02.c +++ b/arch/arm/mach-s3c/mach-gta02.c @@ -421,7 +421,14 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = { /* Get PMU to set USB current limit accordingly. */ static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = { .vbus_draw = gta02_udc_vbus_draw, - .pullup_pin = GTA02_GPIO_USB_PULLUP, +}; + +static struct gpiod_lookup_table gta02_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOB", 9, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; /* USB */ @@ -555,6 +562,7 @@ static void __init gta02_machine_init(void) s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE); + gpiod_add_lookup_table(>a02_udc_gpio_table); gpiod_add_lookup_table(>a02_audio_gpio_table); gpiod_add_lookup_table(>a02_mmc_gpio_table); platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices)); diff --git a/arch/arm/mach-s3c/mach-h1940.c b/arch/arm/mach-s3c/mach-h1940.c index 032b18837855..83ac6cfdb1d8 100644 --- a/arch/arm/mach-s3c/mach-h1940.c +++ b/arch/arm/mach-s3c/mach-h1940.c @@ -167,9 +167,15 @@ static struct gpio_chip h1940_latch_gpiochip = { }; static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = { - .vbus_pin = S3C2410_GPG(5), - .vbus_pin_inverted = 1, - .pullup_pin = H1940_LATCH_USB_DP, +}; + +static struct gpiod_lookup_table h1940_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("H1940_LATCH", 7, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = { @@ -725,6 +731,7 @@ static void __init h1940_init(void) u32 tmp; s3c24xx_fb_set_platdata(&h1940_fb_info); + gpiod_add_lookup_table(&h1940_udc_gpio_table); gpiod_add_lookup_table(&h1940_mmc_gpio_table); gpiod_add_lookup_table(&h1940_audio_gpio_table); gpiod_add_lookup_table(&h1940_bat_gpio_table); diff --git a/arch/arm/mach-s3c/mach-jive.c b/arch/arm/mach-s3c/mach-jive.c index e32773175944..16859bb3bb13 100644 --- a/arch/arm/mach-s3c/mach-jive.c +++ b/arch/arm/mach-s3c/mach-jive.c @@ -493,7 +493,14 @@ static struct platform_device *jive_devices[] __initdata = { }; static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = { - .vbus_pin = S3C2410_GPG(1), /* detect is on GPG1 */ +}; + +static struct gpiod_lookup_table jive_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH), + { }, + }, }; /* Jive power management device */ @@ -669,6 +676,7 @@ static void __init jive_machine_init(void) pm_power_off = jive_power_off; + gpiod_add_lookup_table(&jive_udc_gpio_table); gpiod_add_lookup_table(&jive_lcdspi_gpiod_table); gpiod_add_lookup_table(&jive_wm8750_gpiod_table); platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices)); diff --git a/arch/arm/mach-s3c/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c index a6d17ffcdba1..283be70ca622 100644 --- a/arch/arm/mach-s3c/mach-mini2440.c +++ b/arch/arm/mach-s3c/mach-mini2440.c @@ -93,9 +93,15 @@ static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = { /* USB device UDC support */ static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = { - .pullup_pin = S3C2410_GPC(5), }; +static struct gpiod_lookup_table mini2440_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOC", 5, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, +}; /* LCD timing and setup */ @@ -755,6 +761,7 @@ static void __init mini2440_init(void) s3c24xx_fb_set_platdata(&mini2440_fb_info); } + gpiod_add_lookup_table(&mini2440_udc_gpio_table); s3c24xx_udc_set_platdata(&mini2440_udc_cfg); gpiod_add_lookup_table(&mini2440_mmc_gpio_table); s3c24xx_mci_set_platdata(&mini2440_mmc_cfg); diff --git a/arch/arm/mach-s3c/mach-n30.c b/arch/arm/mach-s3c/mach-n30.c index 75f5dc6351a1..90122fc6b2aa 100644 --- a/arch/arm/mach-s3c/mach-n30.c +++ b/arch/arm/mach-s3c/mach-n30.c @@ -84,9 +84,15 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = { }; static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = { - .vbus_pin = S3C2410_GPG(1), - .vbus_pin_inverted = 0, - .pullup_pin = S3C2410_GPB(3), +}; + +static struct gpiod_lookup_table n30_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("GPIOB", 3, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct gpio_keys_button n30_buttons[] = { @@ -595,6 +601,7 @@ static void __init n30_init(void) WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power")); s3c24xx_fb_set_platdata(&n30_fb_info); + gpiod_add_lookup_table(&n30_udc_gpio_table); s3c24xx_udc_set_platdata(&n30_udc_cfg); gpiod_add_lookup_table(&n30_mci_gpio_table); s3c24xx_mci_set_platdata(&n30_mci_cfg); diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c index 7a3e7c0a6484..d8c49e562660 100644 --- a/arch/arm/mach-s3c/mach-rx1950.c +++ b/arch/arm/mach-s3c/mach-rx1950.c @@ -643,9 +643,15 @@ static struct s3c2410_platform_nand rx1950_nand_info = { }; static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = { - .vbus_pin = S3C2410_GPG(5), - .vbus_pin_inverted = 1, - .pullup_pin = S3C2410_GPJ(5), +}; + +static struct gpiod_lookup_table rx1950_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("GPIOJ", 5, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = { @@ -847,6 +853,7 @@ static void __init rx1950_init_machine(void) gpio_direction_output(S3C2410_GPJ(6), 0); pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup)); + gpiod_add_lookup_table(&rx1950_udc_gpio_table); gpiod_add_lookup_table(&rx1950_audio_gpio_table); gpiod_add_lookup_table(&rx1950_bat_gpio_table); /* Configure the I2S pins (GPE0...GPE4) in correct mode */ diff --git a/arch/arm/mach-s3c/mach-smdk2413.c b/arch/arm/mach-s3c/mach-smdk2413.c index f1f0ec174579..2b4e20aaa346 100644 --- a/arch/arm/mach-s3c/mach-smdk2413.c +++ b/arch/arm/mach-s3c/mach-smdk2413.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include #include @@ -74,9 +74,15 @@ static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = { static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = { - .pullup_pin = S3C2410_GPF(2), }; +static struct gpiod_lookup_table smdk2413_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOF", 2, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, +}; static struct platform_device *smdk2413_devices[] __initdata = { &s3c_device_ohci, @@ -115,7 +121,7 @@ static void __init smdk2413_machine_init(void) S3C2410_MISCCR_USBSUSPND0 | S3C2410_MISCCR_USBSUSPND1, 0x0); - + gpiod_add_lookup_table(&smdk2413_udc_gpio_table); s3c24xx_udc_set_platdata(&smdk2413_udc_cfg); s3c_i2c0_set_platdata(NULL); /* Configure the I2S pins (GPE0...GPE4) in correct mode */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 53493dc7d976..bb916a0948a8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -1299,7 +1299,7 @@ interrupts = ; phys = <&usb3_phy0>, <&usb3_phy0>; phy-names = "usb2-phy", "usb3-phy"; - snps,dis-u2-freeclk-exists-quirk; + snps,gfladj-refclk-lpm-sel-quirk; }; }; @@ -1341,7 +1341,7 @@ interrupts = ; phys = <&usb3_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-phy"; - snps,dis-u2-freeclk-exists-quirk; + snps,gfladj-refclk-lpm-sel-quirk; }; }; diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c index e012b21c4fd7..790787f0eba8 100644 --- a/drivers/media/usb/b2c2/flexcop-usb.c +++ b/drivers/media/usb/b2c2/flexcop-usb.c @@ -425,12 +425,14 @@ static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb) static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb) { - u16 frame_size = le16_to_cpu( - fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize); - int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * - frame_size, i, j, ret; + struct usb_host_interface *alt = fc_usb->uintf->cur_altsetting; + u16 frame_size; + int bufsize, i, j, ret; int buffer_offset = 0; + frame_size = usb_endpoint_maxp(&alt->endpoint[0].desc); + bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size; + deb_ts("creating %d iso-urbs with %d frames each of %d bytes size = %d.\n", B2C2_USB_NUM_ISO_URB, B2C2_USB_FRAMES_PER_ISO, frame_size, bufsize); @@ -501,17 +503,21 @@ urb_error: static int flexcop_usb_init(struct flexcop_usb *fc_usb) { - /* use the alternate setting with the larges buffer */ - int ret = usb_set_interface(fc_usb->udev, 0, 1); + struct usb_host_interface *alt; + int ret; + /* use the alternate setting with the largest buffer */ + ret = usb_set_interface(fc_usb->udev, 0, 1); if (ret) { err("set interface failed."); return ret; } - if (fc_usb->uintf->cur_altsetting->desc.bNumEndpoints < 1) + alt = fc_usb->uintf->cur_altsetting; + + if (alt->desc.bNumEndpoints < 1) return -ENODEV; - if (!usb_endpoint_is_isoc_in(&fc_usb->uintf->cur_altsetting->endpoint[0].desc)) + if (!usb_endpoint_is_isoc_in(&alt->endpoint[0].desc)) return -ENODEV; switch (fc_usb->udev->speed) { diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c index 97f312020516..c95a2229f4fa 100644 --- a/drivers/media/usb/uvc/uvc_ctrl.c +++ b/drivers/media/usb/uvc/uvc_ctrl.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "uvcvideo.h" diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c index 744051b52e12..215fb483efb0 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -20,6 +20,7 @@ #include #include +#include #include "uvcvideo.h" @@ -34,198 +35,6 @@ static unsigned int uvc_quirks_param = -1; unsigned int uvc_dbg_param; unsigned int uvc_timeout_param = UVC_CTRL_STREAMING_TIMEOUT; -/* ------------------------------------------------------------------------ - * Video formats - */ - -static struct uvc_format_desc uvc_fmts[] = { - { - .name = "YUV 4:2:2 (YUYV)", - .guid = UVC_GUID_FORMAT_YUY2, - .fcc = V4L2_PIX_FMT_YUYV, - }, - { - .name = "YUV 4:2:2 (YUYV)", - .guid = UVC_GUID_FORMAT_YUY2_ISIGHT, - .fcc = V4L2_PIX_FMT_YUYV, - }, - { - .name = "YUV 4:2:0 (NV12)", - .guid = UVC_GUID_FORMAT_NV12, - .fcc = V4L2_PIX_FMT_NV12, - }, - { - .name = "MJPEG", - .guid = UVC_GUID_FORMAT_MJPEG, - .fcc = V4L2_PIX_FMT_MJPEG, - }, - { - .name = "YVU 4:2:0 (YV12)", - .guid = UVC_GUID_FORMAT_YV12, - .fcc = V4L2_PIX_FMT_YVU420, - }, - { - .name = "YUV 4:2:0 (I420)", - .guid = UVC_GUID_FORMAT_I420, - .fcc = V4L2_PIX_FMT_YUV420, - }, - { - .name = "YUV 4:2:0 (M420)", - .guid = UVC_GUID_FORMAT_M420, - .fcc = V4L2_PIX_FMT_M420, - }, - { - .name = "YUV 4:2:2 (UYVY)", - .guid = UVC_GUID_FORMAT_UYVY, - .fcc = V4L2_PIX_FMT_UYVY, - }, - { - .name = "Greyscale 8-bit (Y800)", - .guid = UVC_GUID_FORMAT_Y800, - .fcc = V4L2_PIX_FMT_GREY, - }, - { - .name = "Greyscale 8-bit (Y8 )", - .guid = UVC_GUID_FORMAT_Y8, - .fcc = V4L2_PIX_FMT_GREY, - }, - { - .name = "Greyscale 8-bit (D3DFMT_L8)", - .guid = UVC_GUID_FORMAT_D3DFMT_L8, - .fcc = V4L2_PIX_FMT_GREY, - }, - { - .name = "IR 8-bit (L8_IR)", - .guid = UVC_GUID_FORMAT_KSMEDIA_L8_IR, - .fcc = V4L2_PIX_FMT_GREY, - }, - { - .name = "Greyscale 10-bit (Y10 )", - .guid = UVC_GUID_FORMAT_Y10, - .fcc = V4L2_PIX_FMT_Y10, - }, - { - .name = "Greyscale 12-bit (Y12 )", - .guid = UVC_GUID_FORMAT_Y12, - .fcc = V4L2_PIX_FMT_Y12, - }, - { - .name = "Greyscale 16-bit (Y16 )", - .guid = UVC_GUID_FORMAT_Y16, - .fcc = V4L2_PIX_FMT_Y16, - }, - { - .name = "BGGR Bayer (BY8 )", - .guid = UVC_GUID_FORMAT_BY8, - .fcc = V4L2_PIX_FMT_SBGGR8, - }, - { - .name = "BGGR Bayer (BA81)", - .guid = UVC_GUID_FORMAT_BA81, - .fcc = V4L2_PIX_FMT_SBGGR8, - }, - { - .name = "GBRG Bayer (GBRG)", - .guid = UVC_GUID_FORMAT_GBRG, - .fcc = V4L2_PIX_FMT_SGBRG8, - }, - { - .name = "GRBG Bayer (GRBG)", - .guid = UVC_GUID_FORMAT_GRBG, - .fcc = V4L2_PIX_FMT_SGRBG8, - }, - { - .name = "RGGB Bayer (RGGB)", - .guid = UVC_GUID_FORMAT_RGGB, - .fcc = V4L2_PIX_FMT_SRGGB8, - }, - { - .name = "RGB565", - .guid = UVC_GUID_FORMAT_RGBP, - .fcc = V4L2_PIX_FMT_RGB565, - }, - { - .name = "BGR 8:8:8 (BGR3)", - .guid = UVC_GUID_FORMAT_BGR3, - .fcc = V4L2_PIX_FMT_BGR24, - }, - { - .name = "H.264", - .guid = UVC_GUID_FORMAT_H264, - .fcc = V4L2_PIX_FMT_H264, - }, - { - .name = "H.265", - .guid = UVC_GUID_FORMAT_H265, - .fcc = V4L2_PIX_FMT_HEVC, - }, - { - .name = "Greyscale 8 L/R (Y8I)", - .guid = UVC_GUID_FORMAT_Y8I, - .fcc = V4L2_PIX_FMT_Y8I, - }, - { - .name = "Greyscale 12 L/R (Y12I)", - .guid = UVC_GUID_FORMAT_Y12I, - .fcc = V4L2_PIX_FMT_Y12I, - }, - { - .name = "Depth data 16-bit (Z16)", - .guid = UVC_GUID_FORMAT_Z16, - .fcc = V4L2_PIX_FMT_Z16, - }, - { - .name = "Bayer 10-bit (SRGGB10P)", - .guid = UVC_GUID_FORMAT_RW10, - .fcc = V4L2_PIX_FMT_SRGGB10P, - }, - { - .name = "Bayer 16-bit (SBGGR16)", - .guid = UVC_GUID_FORMAT_BG16, - .fcc = V4L2_PIX_FMT_SBGGR16, - }, - { - .name = "Bayer 16-bit (SGBRG16)", - .guid = UVC_GUID_FORMAT_GB16, - .fcc = V4L2_PIX_FMT_SGBRG16, - }, - { - .name = "Bayer 16-bit (SRGGB16)", - .guid = UVC_GUID_FORMAT_RG16, - .fcc = V4L2_PIX_FMT_SRGGB16, - }, - { - .name = "Bayer 16-bit (SGRBG16)", - .guid = UVC_GUID_FORMAT_GR16, - .fcc = V4L2_PIX_FMT_SGRBG16, - }, - { - .name = "Depth data 16-bit (Z16)", - .guid = UVC_GUID_FORMAT_INVZ, - .fcc = V4L2_PIX_FMT_Z16, - }, - { - .name = "Greyscale 10-bit (Y10 )", - .guid = UVC_GUID_FORMAT_INVI, - .fcc = V4L2_PIX_FMT_Y10, - }, - { - .name = "IR:Depth 26-bit (INZI)", - .guid = UVC_GUID_FORMAT_INZI, - .fcc = V4L2_PIX_FMT_INZI, - }, - { - .name = "4-bit Depth Confidence (Packed)", - .guid = UVC_GUID_FORMAT_CNF4, - .fcc = V4L2_PIX_FMT_CNF4, - }, - { - .name = "HEVC", - .guid = UVC_GUID_FORMAT_HEVC, - .fcc = V4L2_PIX_FMT_HEVC, - }, -}; - /* ------------------------------------------------------------------------ * Utility functions */ @@ -245,19 +54,6 @@ struct usb_host_endpoint *uvc_find_endpoint(struct usb_host_interface *alts, return NULL; } -static struct uvc_format_desc *uvc_format_by_guid(const u8 guid[16]) -{ - unsigned int len = ARRAY_SIZE(uvc_fmts); - unsigned int i; - - for (i = 0; i < len; ++i) { - if (memcmp(guid, uvc_fmts[i].guid, 16) == 0) - return &uvc_fmts[i]; - } - - return NULL; -} - static enum v4l2_colorspace uvc_colorspace(const u8 primaries) { static const enum v4l2_colorspace colorprimaries[] = { @@ -329,90 +125,6 @@ static enum v4l2_ycbcr_encoding uvc_ycbcr_enc(const u8 matrix_coefficients) return V4L2_YCBCR_ENC_DEFAULT; /* Reserved */ } -/* - * Simplify a fraction using a simple continued fraction decomposition. The - * idea here is to convert fractions such as 333333/10000000 to 1/30 using - * 32 bit arithmetic only. The algorithm is not perfect and relies upon two - * arbitrary parameters to remove non-significative terms from the simple - * continued fraction decomposition. Using 8 and 333 for n_terms and threshold - * respectively seems to give nice results. - */ -void uvc_simplify_fraction(u32 *numerator, u32 *denominator, - unsigned int n_terms, unsigned int threshold) -{ - u32 *an; - u32 x, y, r; - unsigned int i, n; - - an = kmalloc_array(n_terms, sizeof(*an), GFP_KERNEL); - if (an == NULL) - return; - - /* - * Convert the fraction to a simple continued fraction. See - * https://en.wikipedia.org/wiki/Continued_fraction - * Stop if the current term is bigger than or equal to the given - * threshold. - */ - x = *numerator; - y = *denominator; - - for (n = 0; n < n_terms && y != 0; ++n) { - an[n] = x / y; - if (an[n] >= threshold) { - if (n < 2) - n++; - break; - } - - r = x - an[n] * y; - x = y; - y = r; - } - - /* Expand the simple continued fraction back to an integer fraction. */ - x = 0; - y = 1; - - for (i = n; i > 0; --i) { - r = y; - y = an[i-1] * y + x; - x = r; - } - - *numerator = y; - *denominator = x; - kfree(an); -} - -/* - * Convert a fraction to a frame interval in 100ns multiples. The idea here is - * to compute numerator / denominator * 10000000 using 32 bit fixed point - * arithmetic only. - */ -u32 uvc_fraction_to_interval(u32 numerator, u32 denominator) -{ - u32 multiplier; - - /* Saturate the result if the operation would overflow. */ - if (denominator == 0 || - numerator/denominator >= ((u32)-1)/10000000) - return (u32)-1; - - /* - * Divide both the denominator and the multiplier by two until - * numerator * multiplier doesn't overflow. If anyone knows a better - * algorithm please let me know. - */ - multiplier = 10000000; - while (numerator > ((u32)-1)/multiplier) { - multiplier /= 2; - denominator /= 2; - } - - return denominator ? numerator * multiplier / denominator : 0; -} - /* ------------------------------------------------------------------------ * Terminal and unit management */ diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c index 4cc3fa6b8c98..f4d4c33b6dfb 100644 --- a/drivers/media/usb/uvc/uvc_v4l2.c +++ b/drivers/media/usb/uvc/uvc_v4l2.c @@ -386,7 +386,7 @@ static int uvc_v4l2_get_streamparm(struct uvc_streaming *stream, mutex_unlock(&stream->mutex); denominator = 10000000; - uvc_simplify_fraction(&numerator, &denominator, 8, 333); + v4l2_simplify_fraction(&numerator, &denominator, 8, 333); memset(parm, 0, sizeof(*parm)); parm->type = stream->type; @@ -427,7 +427,7 @@ static int uvc_v4l2_set_streamparm(struct uvc_streaming *stream, else timeperframe = parm->parm.output.timeperframe; - interval = uvc_fraction_to_interval(timeperframe.numerator, + interval = v4l2_fraction_to_interval(timeperframe.numerator, timeperframe.denominator); uvc_dbg(stream->dev, FORMAT, "Setting frame interval to %u/%u (%u)\n", timeperframe.numerator, timeperframe.denominator, interval); @@ -481,7 +481,7 @@ static int uvc_v4l2_set_streamparm(struct uvc_streaming *stream, /* Return the actual frame period. */ timeperframe.numerator = probe.dwFrameInterval; timeperframe.denominator = 10000000; - uvc_simplify_fraction(&timeperframe.numerator, + v4l2_simplify_fraction(&timeperframe.numerator, &timeperframe.denominator, 8, 333); if (parm->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { @@ -1275,7 +1275,7 @@ static int uvc_ioctl_enum_frameintervals(struct file *file, void *fh, fival->discrete.numerator = frame->dwFrameInterval[index]; fival->discrete.denominator = 10000000; - uvc_simplify_fraction(&fival->discrete.numerator, + v4l2_simplify_fraction(&fival->discrete.numerator, &fival->discrete.denominator, 8, 333); } else { fival->type = V4L2_FRMIVAL_TYPE_STEPWISE; @@ -1285,11 +1285,11 @@ static int uvc_ioctl_enum_frameintervals(struct file *file, void *fh, fival->stepwise.max.denominator = 10000000; fival->stepwise.step.numerator = frame->dwFrameInterval[2]; fival->stepwise.step.denominator = 10000000; - uvc_simplify_fraction(&fival->stepwise.min.numerator, + v4l2_simplify_fraction(&fival->stepwise.min.numerator, &fival->stepwise.min.denominator, 8, 333); - uvc_simplify_fraction(&fival->stepwise.max.numerator, + v4l2_simplify_fraction(&fival->stepwise.max.numerator, &fival->stepwise.max.denominator, 8, 333); - uvc_simplify_fraction(&fival->stepwise.step.numerator, + v4l2_simplify_fraction(&fival->stepwise.step.numerator, &fival->stepwise.step.denominator, 8, 333); } diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h index 24c911aeebce..df93db259312 100644 --- a/drivers/media/usb/uvc/uvcvideo.h +++ b/drivers/media/usb/uvc/uvcvideo.h @@ -41,144 +41,6 @@ #define UVC_EXT_GPIO_UNIT 0x7ffe #define UVC_EXT_GPIO_UNIT_ID 0x100 -/* ------------------------------------------------------------------------ - * GUIDs - */ -#define UVC_GUID_UVC_CAMERA \ - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} -#define UVC_GUID_UVC_OUTPUT \ - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02} -#define UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT \ - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03} -#define UVC_GUID_UVC_PROCESSING \ - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01} -#define UVC_GUID_UVC_SELECTOR \ - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02} -#define UVC_GUID_EXT_GPIO_CONTROLLER \ - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03} - -#define UVC_GUID_FORMAT_MJPEG \ - { 'M', 'J', 'P', 'G', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_YUY2 \ - { 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_YUY2_ISIGHT \ - { 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0x00, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_NV12 \ - { 'N', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_YV12 \ - { 'Y', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_I420 \ - { 'I', '4', '2', '0', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_UYVY \ - { 'U', 'Y', 'V', 'Y', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_Y800 \ - { 'Y', '8', '0', '0', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_Y8 \ - { 'Y', '8', ' ', ' ', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_Y10 \ - { 'Y', '1', '0', ' ', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_Y12 \ - { 'Y', '1', '2', ' ', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_Y16 \ - { 'Y', '1', '6', ' ', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_BY8 \ - { 'B', 'Y', '8', ' ', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_BA81 \ - { 'B', 'A', '8', '1', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_GBRG \ - { 'G', 'B', 'R', 'G', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_GRBG \ - { 'G', 'R', 'B', 'G', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_RGGB \ - { 'R', 'G', 'G', 'B', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_BG16 \ - { 'B', 'G', '1', '6', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_GB16 \ - { 'G', 'B', '1', '6', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_RG16 \ - { 'R', 'G', '1', '6', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_GR16 \ - { 'G', 'R', '1', '6', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_RGBP \ - { 'R', 'G', 'B', 'P', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_BGR3 \ - { 0x7d, 0xeb, 0x36, 0xe4, 0x4f, 0x52, 0xce, 0x11, \ - 0x9f, 0x53, 0x00, 0x20, 0xaf, 0x0b, 0xa7, 0x70} -#define UVC_GUID_FORMAT_M420 \ - { 'M', '4', '2', '0', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} - -#define UVC_GUID_FORMAT_H264 \ - { 'H', '2', '6', '4', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_H265 \ - { 'H', '2', '6', '5', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_Y8I \ - { 'Y', '8', 'I', ' ', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_Y12I \ - { 'Y', '1', '2', 'I', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_Z16 \ - { 'Z', '1', '6', ' ', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_RW10 \ - { 'R', 'W', '1', '0', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_INVZ \ - { 'I', 'N', 'V', 'Z', 0x90, 0x2d, 0x58, 0x4a, \ - 0x92, 0x0b, 0x77, 0x3f, 0x1f, 0x2c, 0x55, 0x6b} -#define UVC_GUID_FORMAT_INZI \ - { 'I', 'N', 'Z', 'I', 0x66, 0x1a, 0x42, 0xa2, \ - 0x90, 0x65, 0xd0, 0x18, 0x14, 0xa8, 0xef, 0x8a} -#define UVC_GUID_FORMAT_INVI \ - { 'I', 'N', 'V', 'I', 0xdb, 0x57, 0x49, 0x5e, \ - 0x8e, 0x3f, 0xf4, 0x79, 0x53, 0x2b, 0x94, 0x6f} -#define UVC_GUID_FORMAT_CNF4 \ - { 'C', ' ', ' ', ' ', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} - -#define UVC_GUID_FORMAT_D3DFMT_L8 \ - {0x32, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} -#define UVC_GUID_FORMAT_KSMEDIA_L8_IR \ - {0x32, 0x00, 0x00, 0x00, 0x02, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} - -#define UVC_GUID_FORMAT_HEVC \ - { 'H', 'E', 'V', 'C', 0x00, 0x00, 0x10, 0x00, \ - 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} - - /* ------------------------------------------------------------------------ * Driver specific constants. */ @@ -283,12 +145,6 @@ struct uvc_control { struct uvc_fh *handle; /* File handle that last changed the control. */ }; -struct uvc_format_desc { - char *name; - u8 guid[16]; - u32 fcc; -}; - /* * The term 'entity' refers to both UVC units and UVC terminals. * @@ -911,9 +767,6 @@ int uvc_xu_ctrl_query(struct uvc_video_chain *chain, struct uvc_xu_control_query *xqry); /* Utility functions */ -void uvc_simplify_fraction(u32 *numerator, u32 *denominator, - unsigned int n_terms, unsigned int threshold); -u32 uvc_fraction_to_interval(u32 numerator, u32 denominator); struct usb_host_endpoint *uvc_find_endpoint(struct usb_host_interface *alts, u8 epaddr); u16 uvc_endpoint_max_bpi(struct usb_device *dev, struct usb_host_endpoint *ep); diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c index e0fbe6ba4b6c..40f56e044640 100644 --- a/drivers/media/v4l2-core/v4l2-common.c +++ b/drivers/media/v4l2-core/v4l2-common.c @@ -484,3 +484,89 @@ s64 v4l2_get_link_freq(struct v4l2_ctrl_handler *handler, unsigned int mul, return freq > 0 ? freq : -EINVAL; } EXPORT_SYMBOL_GPL(v4l2_get_link_freq); + +/* + * Simplify a fraction using a simple continued fraction decomposition. The + * idea here is to convert fractions such as 333333/10000000 to 1/30 using + * 32 bit arithmetic only. The algorithm is not perfect and relies upon two + * arbitrary parameters to remove non-significative terms from the simple + * continued fraction decomposition. Using 8 and 333 for n_terms and threshold + * respectively seems to give nice results. + */ +void v4l2_simplify_fraction(u32 *numerator, u32 *denominator, + unsigned int n_terms, unsigned int threshold) +{ + u32 *an; + u32 x, y, r; + unsigned int i, n; + + an = kmalloc_array(n_terms, sizeof(*an), GFP_KERNEL); + if (an == NULL) + return; + + /* + * Convert the fraction to a simple continued fraction. See + * https://en.wikipedia.org/wiki/Continued_fraction + * Stop if the current term is bigger than or equal to the given + * threshold. + */ + x = *numerator; + y = *denominator; + + for (n = 0; n < n_terms && y != 0; ++n) { + an[n] = x / y; + if (an[n] >= threshold) { + if (n < 2) + n++; + break; + } + + r = x - an[n] * y; + x = y; + y = r; + } + + /* Expand the simple continued fraction back to an integer fraction. */ + x = 0; + y = 1; + + for (i = n; i > 0; --i) { + r = y; + y = an[i-1] * y + x; + x = r; + } + + *numerator = y; + *denominator = x; + kfree(an); +} +EXPORT_SYMBOL_GPL(v4l2_simplify_fraction); + +/* + * Convert a fraction to a frame interval in 100ns multiples. The idea here is + * to compute numerator / denominator * 10000000 using 32 bit fixed point + * arithmetic only. + */ +u32 v4l2_fraction_to_interval(u32 numerator, u32 denominator) +{ + u32 multiplier; + + /* Saturate the result if the operation would overflow. */ + if (denominator == 0 || + numerator/denominator >= ((u32)-1)/10000000) + return (u32)-1; + + /* + * Divide both the denominator and the multiplier by two until + * numerator * multiplier doesn't overflow. If anyone knows a better + * algorithm please let me know. + */ + multiplier = 10000000; + while (numerator > ((u32)-1)/multiplier) { + multiplier /= 2; + denominator /= 2; + } + + return denominator ? numerator * multiplier / denominator : 0; +} +EXPORT_SYMBOL_GPL(v4l2_fraction_to_interval); diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c index f1643fb7d351..0996ede63387 100644 --- a/drivers/phy/tegra/xusb-tegra186.c +++ b/drivers/phy/tegra/xusb-tegra186.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (c) 2016-2020, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2016-2022, NVIDIA CORPORATION. All rights reserved. */ #include @@ -638,7 +638,7 @@ static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl) mutex_unlock(&padctl->lock); } -static void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy) +static void tegra186_utmi_pad_power_on(struct phy *phy) { struct tegra_xusb_lane *lane = phy_get_drvdata(phy); struct tegra_xusb_padctl *padctl = lane->pad->padctl; @@ -656,6 +656,8 @@ static void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy) return; } + dev_dbg(dev, "power on UTMI pad %u\n", index); + tegra186_utmi_bias_pad_power_on(padctl); udelay(2); @@ -669,7 +671,7 @@ static void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy) padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); } -static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy) +static void tegra186_utmi_pad_power_down(struct phy *phy) { struct tegra_xusb_lane *lane = phy_get_drvdata(phy); struct tegra_xusb_padctl *padctl = lane->pad->padctl; @@ -679,6 +681,8 @@ static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy) if (!phy) return; + dev_dbg(padctl->dev, "power down UTMI pad %u\n", index); + value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index)); value |= USB2_OTG_PD; padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index)); @@ -849,15 +853,14 @@ static int tegra186_utmi_phy_power_on(struct phy *phy) value |= RPD_CTRL(priv->calib.rpd_ctrl); padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); - /* TODO: pad power saving */ - tegra_phy_xusb_utmi_pad_power_on(phy); + tegra186_utmi_pad_power_on(phy); + return 0; } static int tegra186_utmi_phy_power_off(struct phy *phy) { - /* TODO: pad power saving */ - tegra_phy_xusb_utmi_pad_power_down(phy); + tegra186_utmi_pad_power_down(phy); return 0; } @@ -1483,6 +1486,8 @@ static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = { .suspend_noirq = tegra186_xusb_padctl_suspend_noirq, .resume_noirq = tegra186_xusb_padctl_resume_noirq, .vbus_override = tegra186_xusb_padctl_vbus_override, + .utmi_pad_power_on = tegra186_utmi_pad_power_on, + .utmi_pad_power_down = tegra186_utmi_pad_power_down, }; #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c index 82fff4d9f4e6..95091876c422 100644 --- a/drivers/phy/tegra/xusb.c +++ b/drivers/phy/tegra/xusb.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (c) 2014-2020, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2014-2022, NVIDIA CORPORATION. All rights reserved. */ #include @@ -1459,6 +1459,26 @@ int tegra_phy_xusb_utmi_port_reset(struct phy *phy) } EXPORT_SYMBOL_GPL(tegra_phy_xusb_utmi_port_reset); +void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy) +{ + struct tegra_xusb_lane *lane = phy_get_drvdata(phy); + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + + if (padctl->soc->ops->utmi_pad_power_on) + padctl->soc->ops->utmi_pad_power_on(phy); +} +EXPORT_SYMBOL_GPL(tegra_phy_xusb_utmi_pad_power_on); + +void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy) +{ + struct tegra_xusb_lane *lane = phy_get_drvdata(phy); + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + + if (padctl->soc->ops->utmi_pad_power_down) + padctl->soc->ops->utmi_pad_power_down(phy); +} +EXPORT_SYMBOL_GPL(tegra_phy_xusb_utmi_pad_power_down); + int tegra_xusb_padctl_get_usb3_companion(struct tegra_xusb_padctl *padctl, unsigned int port) { diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h index 034f7a2c28d6..8cfbbdbd6e0c 100644 --- a/drivers/phy/tegra/xusb.h +++ b/drivers/phy/tegra/xusb.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * Copyright (c) 2014-2020, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2014-2022, NVIDIA CORPORATION. All rights reserved. * Copyright (c) 2015, Google Inc. */ @@ -412,6 +412,8 @@ struct tegra_xusb_padctl_ops { unsigned int index, bool enable); int (*vbus_override)(struct tegra_xusb_padctl *padctl, bool set); int (*utmi_port_reset)(struct phy *phy); + void (*utmi_pad_power_on)(struct phy *phy); + void (*utmi_pad_power_down)(struct phy *phy); }; struct tegra_xusb_padctl_soc { diff --git a/drivers/thunderbolt/Kconfig b/drivers/thunderbolt/Kconfig index f12d0a3ee3e2..448fd2ec8f6e 100644 --- a/drivers/thunderbolt/Kconfig +++ b/drivers/thunderbolt/Kconfig @@ -27,6 +27,16 @@ config USB4_DEBUGFS_WRITE Only enable this if you know what you are doing! Never enable this for production systems or distro kernels. +config USB4_DEBUGFS_MARGINING + bool "Expose receiver lane margining operations under USB4 ports (DANGEROUS)" + depends on DEBUG_FS + depends on USB4_DEBUGFS_WRITE + help + Enables hardware and software based receiver lane margining support + under each USB4 port. Used for electrical quality and robustness + validation during manufacturing. Should not be enabled by distro + kernels. + config USB4_KUNIT_TEST bool "KUnit tests" if !KUNIT_ALL_TESTS depends on USB4 && KUNIT=y diff --git a/drivers/thunderbolt/debugfs.c b/drivers/thunderbolt/debugfs.c index c850b0ac098c..834bcad42e9f 100644 --- a/drivers/thunderbolt/debugfs.c +++ b/drivers/thunderbolt/debugfs.c @@ -12,6 +12,7 @@ #include #include "tb.h" +#include "sb_regs.h" #define PORT_CAP_PCIE_LEN 1 #define PORT_CAP_POWER_LEN 2 @@ -187,6 +188,828 @@ static ssize_t switch_regs_write(struct file *file, const char __user *user_buf, #define DEBUGFS_MODE 0400 #endif +#if IS_ENABLED(CONFIG_USB4_DEBUGFS_MARGINING) +/** + * struct tb_margining - Lane margining support + * @caps: Port lane margining capabilities + * @results: Last lane margining results + * @lanes: %0, %1 or %7 (all) + * @min_ber_level: Minimum supported BER level contour value + * @max_ber_level: Maximum supported BER level contour value + * @ber_level: Current BER level contour value + * @voltage_steps: Number of mandatory voltage steps + * @max_voltage_offset: Maximum mandatory voltage offset (in mV) + * @time_steps: Number of time margin steps + * @max_time_offset: Maximum time margin offset (in mUI) + * @software: %true if software margining is used instead of hardware + * @time: %true if time margining is used instead of voltage + * @right_high: %false if left/low margin test is performed, %true if + * right/high + */ +struct tb_margining { + u32 caps[2]; + u32 results[2]; + unsigned int lanes; + unsigned int min_ber_level; + unsigned int max_ber_level; + unsigned int ber_level; + unsigned int voltage_steps; + unsigned int max_voltage_offset; + unsigned int time_steps; + unsigned int max_time_offset; + bool software; + bool time; + bool right_high; +}; + +static bool supports_software(const struct usb4_port *usb4) +{ + return usb4->margining->caps[0] & USB4_MARGIN_CAP_0_MODES_SW; +} + +static bool supports_hardware(const struct usb4_port *usb4) +{ + return usb4->margining->caps[0] & USB4_MARGIN_CAP_0_MODES_HW; +} + +static bool both_lanes(const struct usb4_port *usb4) +{ + return usb4->margining->caps[0] & USB4_MARGIN_CAP_0_2_LANES; +} + +static unsigned int independent_voltage_margins(const struct usb4_port *usb4) +{ + return (usb4->margining->caps[0] & USB4_MARGIN_CAP_0_VOLTAGE_INDP_MASK) >> + USB4_MARGIN_CAP_0_VOLTAGE_INDP_SHIFT; +} + +static bool supports_time(const struct usb4_port *usb4) +{ + return usb4->margining->caps[0] & USB4_MARGIN_CAP_0_TIME; +} + +/* Only applicable if supports_time() returns true */ +static unsigned int independent_time_margins(const struct usb4_port *usb4) +{ + return (usb4->margining->caps[1] & USB4_MARGIN_CAP_1_TIME_INDP_MASK) >> + USB4_MARGIN_CAP_1_TIME_INDP_SHIFT; +} + +static ssize_t +margining_ber_level_write(struct file *file, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct tb_port *port = s->private; + struct usb4_port *usb4 = port->usb4; + struct tb *tb = port->sw->tb; + unsigned int val; + int ret = 0; + char *buf; + + if (mutex_lock_interruptible(&tb->lock)) + return -ERESTARTSYS; + + if (usb4->margining->software) { + ret = -EINVAL; + goto out_unlock; + } + + buf = validate_and_copy_from_user(user_buf, &count); + if (IS_ERR(buf)) { + ret = PTR_ERR(buf); + goto out_unlock; + } + + buf[count - 1] = '\0'; + + ret = kstrtouint(buf, 10, &val); + if (ret) + goto out_free; + + if (val < usb4->margining->min_ber_level || + val > usb4->margining->max_ber_level) { + ret = -EINVAL; + goto out_free; + } + + usb4->margining->ber_level = val; + +out_free: + free_page((unsigned long)buf); +out_unlock: + mutex_unlock(&tb->lock); + + return ret < 0 ? ret : count; +} + +static void ber_level_show(struct seq_file *s, unsigned int val) +{ + if (val % 2) + seq_printf(s, "3 * 1e%d (%u)\n", -12 + (val + 1) / 2, val); + else + seq_printf(s, "1e%d (%u)\n", -12 + val / 2, val); +} + +static int margining_ber_level_show(struct seq_file *s, void *not_used) +{ + struct tb_port *port = s->private; + struct usb4_port *usb4 = port->usb4; + + if (usb4->margining->software) + return -EINVAL; + ber_level_show(s, usb4->margining->ber_level); + return 0; +} +DEBUGFS_ATTR_RW(margining_ber_level); + +static int margining_caps_show(struct seq_file *s, void *not_used) +{ + struct tb_port *port = s->private; + struct usb4_port *usb4 = port->usb4; + struct tb *tb = port->sw->tb; + u32 cap0, cap1; + + if (mutex_lock_interruptible(&tb->lock)) + return -ERESTARTSYS; + + /* Dump the raw caps first */ + cap0 = usb4->margining->caps[0]; + seq_printf(s, "0x%08x\n", cap0); + cap1 = usb4->margining->caps[1]; + seq_printf(s, "0x%08x\n", cap1); + + seq_printf(s, "# software margining: %s\n", + supports_software(usb4) ? "yes" : "no"); + if (supports_hardware(usb4)) { + seq_puts(s, "# hardware margining: yes\n"); + seq_puts(s, "# minimum BER level contour: "); + ber_level_show(s, usb4->margining->min_ber_level); + seq_puts(s, "# maximum BER level contour: "); + ber_level_show(s, usb4->margining->max_ber_level); + } else { + seq_puts(s, "# hardware margining: no\n"); + } + + seq_printf(s, "# both lanes simultaneously: %s\n", + both_lanes(usb4) ? "yes" : "no"); + seq_printf(s, "# voltage margin steps: %u\n", + usb4->margining->voltage_steps); + seq_printf(s, "# maximum voltage offset: %u mV\n", + usb4->margining->max_voltage_offset); + + switch (independent_voltage_margins(usb4)) { + case USB4_MARGIN_CAP_0_VOLTAGE_MIN: + seq_puts(s, "# returns minimum between high and low voltage margins\n"); + break; + case USB4_MARGIN_CAP_0_VOLTAGE_HL: + seq_puts(s, "# returns high or low voltage margin\n"); + break; + case USB4_MARGIN_CAP_0_VOLTAGE_BOTH: + seq_puts(s, "# returns both high and low margins\n"); + break; + } + + if (supports_time(usb4)) { + seq_puts(s, "# time margining: yes\n"); + seq_printf(s, "# time margining is destructive: %s\n", + cap1 & USB4_MARGIN_CAP_1_TIME_DESTR ? "yes" : "no"); + + switch (independent_time_margins(usb4)) { + case USB4_MARGIN_CAP_1_TIME_MIN: + seq_puts(s, "# returns minimum between left and right time margins\n"); + break; + case USB4_MARGIN_CAP_1_TIME_LR: + seq_puts(s, "# returns left or right margin\n"); + break; + case USB4_MARGIN_CAP_1_TIME_BOTH: + seq_puts(s, "# returns both left and right margins\n"); + break; + } + + seq_printf(s, "# time margin steps: %u\n", + usb4->margining->time_steps); + seq_printf(s, "# maximum time offset: %u mUI\n", + usb4->margining->max_time_offset); + } else { + seq_puts(s, "# time margining: no\n"); + } + + mutex_unlock(&tb->lock); + return 0; +} +DEBUGFS_ATTR_RO(margining_caps); + +static ssize_t +margining_lanes_write(struct file *file, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct tb_port *port = s->private; + struct usb4_port *usb4 = port->usb4; + struct tb *tb = port->sw->tb; + int ret = 0; + char *buf; + + buf = validate_and_copy_from_user(user_buf, &count); + if (IS_ERR(buf)) + return PTR_ERR(buf); + + buf[count - 1] = '\0'; + + if (mutex_lock_interruptible(&tb->lock)) { + ret = -ERESTARTSYS; + goto out_free; + } + + if (!strcmp(buf, "0")) { + usb4->margining->lanes = 0; + } else if (!strcmp(buf, "1")) { + usb4->margining->lanes = 1; + } else if (!strcmp(buf, "all")) { + /* Needs to be supported */ + if (both_lanes(usb4)) + usb4->margining->lanes = 7; + else + ret = -EINVAL; + } else { + ret = -EINVAL; + } + + mutex_unlock(&tb->lock); + +out_free: + free_page((unsigned long)buf); + return ret < 0 ? ret : count; +} + +static int margining_lanes_show(struct seq_file *s, void *not_used) +{ + struct tb_port *port = s->private; + struct usb4_port *usb4 = port->usb4; + struct tb *tb = port->sw->tb; + unsigned int lanes; + + if (mutex_lock_interruptible(&tb->lock)) + return -ERESTARTSYS; + + lanes = usb4->margining->lanes; + if (both_lanes(usb4)) { + if (!lanes) + seq_puts(s, "[0] 1 all\n"); + else if (lanes == 1) + seq_puts(s, "0 [1] all\n"); + else + seq_puts(s, "0 1 [all]\n"); + } else { + if (!lanes) + seq_puts(s, "[0] 1\n"); + else + seq_puts(s, "0 [1]\n"); + } + + mutex_unlock(&tb->lock); + return 0; +} +DEBUGFS_ATTR_RW(margining_lanes); + +static ssize_t margining_mode_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct tb_port *port = s->private; + struct usb4_port *usb4 = port->usb4; + struct tb *tb = port->sw->tb; + int ret = 0; + char *buf; + + buf = validate_and_copy_from_user(user_buf, &count); + if (IS_ERR(buf)) + return PTR_ERR(buf); + + buf[count - 1] = '\0'; + + if (mutex_lock_interruptible(&tb->lock)) { + ret = -ERESTARTSYS; + goto out_free; + } + + if (!strcmp(buf, "software")) { + if (supports_software(usb4)) + usb4->margining->software = true; + else + ret = -EINVAL; + } else if (!strcmp(buf, "hardware")) { + if (supports_hardware(usb4)) + usb4->margining->software = false; + else + ret = -EINVAL; + } else { + ret = -EINVAL; + } + + mutex_unlock(&tb->lock); + +out_free: + free_page((unsigned long)buf); + return ret ? ret : count; +} + +static int margining_mode_show(struct seq_file *s, void *not_used) +{ + const struct tb_port *port = s->private; + const struct usb4_port *usb4 = port->usb4; + struct tb *tb = port->sw->tb; + const char *space = ""; + + if (mutex_lock_interruptible(&tb->lock)) + return -ERESTARTSYS; + + if (supports_software(usb4)) { + if (usb4->margining->software) + seq_puts(s, "[software]"); + else + seq_puts(s, "software"); + space = " "; + } + if (supports_hardware(usb4)) { + if (usb4->margining->software) + seq_printf(s, "%shardware", space); + else + seq_printf(s, "%s[hardware]", space); + } + + mutex_unlock(&tb->lock); + + seq_puts(s, "\n"); + return 0; +} +DEBUGFS_ATTR_RW(margining_mode); + +static int margining_run_write(void *data, u64 val) +{ + struct tb_port *port = data; + struct usb4_port *usb4 = port->usb4; + struct tb_switch *sw = port->sw; + struct tb_margining *margining; + struct tb *tb = sw->tb; + int ret; + + if (val != 1) + return -EINVAL; + + pm_runtime_get_sync(&sw->dev); + + if (mutex_lock_interruptible(&tb->lock)) { + ret = -ERESTARTSYS; + goto out_rpm_put; + } + + /* + * CL states may interfere with lane margining so inform the user know + * and bail out. + */ + if (tb_port_is_clx_enabled(port, TB_CL1 | TB_CL2)) { + tb_port_warn(port, + "CL states are enabled, Disable them with clx=0 and re-connect\n"); + ret = -EINVAL; + goto out_unlock; + } + + margining = usb4->margining; + + if (margining->software) { + tb_port_dbg(port, "running software %s lane margining for lanes %u\n", + margining->time ? "time" : "voltage", margining->lanes); + ret = usb4_port_sw_margin(port, margining->lanes, margining->time, + margining->right_high, + USB4_MARGIN_SW_COUNTER_CLEAR); + if (ret) + goto out_unlock; + + ret = usb4_port_sw_margin_errors(port, &margining->results[0]); + } else { + tb_port_dbg(port, "running hardware %s lane margining for lanes %u\n", + margining->time ? "time" : "voltage", margining->lanes); + /* Clear the results */ + margining->results[0] = 0; + margining->results[1] = 0; + ret = usb4_port_hw_margin(port, margining->lanes, + margining->ber_level, margining->time, + margining->right_high, margining->results); + } + +out_unlock: + mutex_unlock(&tb->lock); +out_rpm_put: + pm_runtime_mark_last_busy(&sw->dev); + pm_runtime_put_autosuspend(&sw->dev); + + return ret; +} +DEFINE_DEBUGFS_ATTRIBUTE(margining_run_fops, NULL, margining_run_write, + "%llu\n"); + +static ssize_t margining_results_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct tb_port *port = s->private; + struct usb4_port *usb4 = port->usb4; + struct tb *tb = port->sw->tb; + + if (mutex_lock_interruptible(&tb->lock)) + return -ERESTARTSYS; + + /* Just clear the results */ + usb4->margining->results[0] = 0; + usb4->margining->results[1] = 0; + + mutex_unlock(&tb->lock); + return count; +} + +static void voltage_margin_show(struct seq_file *s, + const struct tb_margining *margining, u8 val) +{ + unsigned int tmp, voltage; + + tmp = val & USB4_MARGIN_HW_RES_1_MARGIN_MASK; + voltage = tmp * margining->max_voltage_offset / margining->voltage_steps; + seq_printf(s, "%u mV (%u)", voltage, tmp); + if (val & USB4_MARGIN_HW_RES_1_EXCEEDS) + seq_puts(s, " exceeds maximum"); + seq_puts(s, "\n"); +} + +static void time_margin_show(struct seq_file *s, + const struct tb_margining *margining, u8 val) +{ + unsigned int tmp, interval; + + tmp = val & USB4_MARGIN_HW_RES_1_MARGIN_MASK; + interval = tmp * margining->max_time_offset / margining->time_steps; + seq_printf(s, "%u mUI (%u)", interval, tmp); + if (val & USB4_MARGIN_HW_RES_1_EXCEEDS) + seq_puts(s, " exceeds maximum"); + seq_puts(s, "\n"); +} + +static int margining_results_show(struct seq_file *s, void *not_used) +{ + struct tb_port *port = s->private; + struct usb4_port *usb4 = port->usb4; + struct tb_margining *margining; + struct tb *tb = port->sw->tb; + + if (mutex_lock_interruptible(&tb->lock)) + return -ERESTARTSYS; + + margining = usb4->margining; + /* Dump the raw results first */ + seq_printf(s, "0x%08x\n", margining->results[0]); + /* Only the hardware margining has two result dwords */ + if (!margining->software) { + unsigned int val; + + seq_printf(s, "0x%08x\n", margining->results[1]); + + if (margining->time) { + if (!margining->lanes || margining->lanes == 7) { + val = margining->results[1]; + seq_puts(s, "# lane 0 right time margin: "); + time_margin_show(s, margining, val); + val = margining->results[1] >> + USB4_MARGIN_HW_RES_1_L0_LL_MARGIN_SHIFT; + seq_puts(s, "# lane 0 left time margin: "); + time_margin_show(s, margining, val); + } + if (margining->lanes == 1 || margining->lanes == 7) { + val = margining->results[1] >> + USB4_MARGIN_HW_RES_1_L1_RH_MARGIN_SHIFT; + seq_puts(s, "# lane 1 right time margin: "); + time_margin_show(s, margining, val); + val = margining->results[1] >> + USB4_MARGIN_HW_RES_1_L1_LL_MARGIN_SHIFT; + seq_puts(s, "# lane 1 left time margin: "); + time_margin_show(s, margining, val); + } + } else { + if (!margining->lanes || margining->lanes == 7) { + val = margining->results[1]; + seq_puts(s, "# lane 0 high voltage margin: "); + voltage_margin_show(s, margining, val); + val = margining->results[1] >> + USB4_MARGIN_HW_RES_1_L0_LL_MARGIN_SHIFT; + seq_puts(s, "# lane 0 low voltage margin: "); + voltage_margin_show(s, margining, val); + } + if (margining->lanes == 1 || margining->lanes == 7) { + val = margining->results[1] >> + USB4_MARGIN_HW_RES_1_L1_RH_MARGIN_SHIFT; + seq_puts(s, "# lane 1 high voltage margin: "); + voltage_margin_show(s, margining, val); + val = margining->results[1] >> + USB4_MARGIN_HW_RES_1_L1_LL_MARGIN_SHIFT; + seq_puts(s, "# lane 1 low voltage margin: "); + voltage_margin_show(s, margining, val); + } + } + } + + mutex_unlock(&tb->lock); + return 0; +} +DEBUGFS_ATTR_RW(margining_results); + +static ssize_t margining_test_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct tb_port *port = s->private; + struct usb4_port *usb4 = port->usb4; + struct tb *tb = port->sw->tb; + int ret = 0; + char *buf; + + buf = validate_and_copy_from_user(user_buf, &count); + if (IS_ERR(buf)) + return PTR_ERR(buf); + + buf[count - 1] = '\0'; + + if (mutex_lock_interruptible(&tb->lock)) { + ret = -ERESTARTSYS; + goto out_free; + } + + if (!strcmp(buf, "time") && supports_time(usb4)) + usb4->margining->time = true; + else if (!strcmp(buf, "voltage")) + usb4->margining->time = false; + else + ret = -EINVAL; + + mutex_unlock(&tb->lock); + +out_free: + free_page((unsigned long)buf); + return ret ? ret : count; +} + +static int margining_test_show(struct seq_file *s, void *not_used) +{ + struct tb_port *port = s->private; + struct usb4_port *usb4 = port->usb4; + struct tb *tb = port->sw->tb; + + if (mutex_lock_interruptible(&tb->lock)) + return -ERESTARTSYS; + + if (supports_time(usb4)) { + if (usb4->margining->time) + seq_puts(s, "voltage [time]\n"); + else + seq_puts(s, "[voltage] time\n"); + } else { + seq_puts(s, "[voltage]\n"); + } + + mutex_unlock(&tb->lock); + return 0; +} +DEBUGFS_ATTR_RW(margining_test); + +static ssize_t margining_margin_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct tb_port *port = s->private; + struct usb4_port *usb4 = port->usb4; + struct tb *tb = port->sw->tb; + int ret = 0; + char *buf; + + buf = validate_and_copy_from_user(user_buf, &count); + if (IS_ERR(buf)) + return PTR_ERR(buf); + + buf[count - 1] = '\0'; + + if (mutex_lock_interruptible(&tb->lock)) { + ret = -ERESTARTSYS; + goto out_free; + } + + if (usb4->margining->time) { + if (!strcmp(buf, "left")) + usb4->margining->right_high = false; + else if (!strcmp(buf, "right")) + usb4->margining->right_high = true; + else + ret = -EINVAL; + } else { + if (!strcmp(buf, "low")) + usb4->margining->right_high = false; + else if (!strcmp(buf, "high")) + usb4->margining->right_high = true; + else + ret = -EINVAL; + } + + mutex_unlock(&tb->lock); + +out_free: + free_page((unsigned long)buf); + return ret ? ret : count; +} + +static int margining_margin_show(struct seq_file *s, void *not_used) +{ + struct tb_port *port = s->private; + struct usb4_port *usb4 = port->usb4; + struct tb *tb = port->sw->tb; + + if (mutex_lock_interruptible(&tb->lock)) + return -ERESTARTSYS; + + if (usb4->margining->time) { + if (usb4->margining->right_high) + seq_puts(s, "left [right]\n"); + else + seq_puts(s, "[left] right\n"); + } else { + if (usb4->margining->right_high) + seq_puts(s, "low [high]\n"); + else + seq_puts(s, "[low] high\n"); + } + + mutex_unlock(&tb->lock); + return 0; +} +DEBUGFS_ATTR_RW(margining_margin); + +static void margining_port_init(struct tb_port *port) +{ + struct tb_margining *margining; + struct dentry *dir, *parent; + struct usb4_port *usb4; + char dir_name[10]; + unsigned int val; + int ret; + + usb4 = port->usb4; + if (!usb4) + return; + + snprintf(dir_name, sizeof(dir_name), "port%d", port->port); + parent = debugfs_lookup(dir_name, port->sw->debugfs_dir); + + margining = kzalloc(sizeof(*margining), GFP_KERNEL); + if (!margining) + return; + + ret = usb4_port_margining_caps(port, margining->caps); + if (ret) { + kfree(margining); + return; + } + + usb4->margining = margining; + + /* Set the initial mode */ + if (supports_software(usb4)) + margining->software = true; + + val = (margining->caps[0] & USB4_MARGIN_CAP_0_VOLTAGE_STEPS_MASK) >> + USB4_MARGIN_CAP_0_VOLTAGE_STEPS_SHIFT; + margining->voltage_steps = val; + val = (margining->caps[0] & USB4_MARGIN_CAP_0_MAX_VOLTAGE_OFFSET_MASK) >> + USB4_MARGIN_CAP_0_MAX_VOLTAGE_OFFSET_SHIFT; + margining->max_voltage_offset = 74 + val * 2; + + if (supports_time(usb4)) { + val = (margining->caps[1] & USB4_MARGIN_CAP_1_TIME_STEPS_MASK) >> + USB4_MARGIN_CAP_1_TIME_STEPS_SHIFT; + margining->time_steps = val; + val = (margining->caps[1] & USB4_MARGIN_CAP_1_TIME_OFFSET_MASK) >> + USB4_MARGIN_CAP_1_TIME_OFFSET_SHIFT; + /* + * Store it as mUI (milli Unit Interval) because we want + * to keep it as integer. + */ + margining->max_time_offset = 200 + 10 * val; + } + + dir = debugfs_create_dir("margining", parent); + if (supports_hardware(usb4)) { + val = (margining->caps[1] & USB4_MARGIN_CAP_1_MIN_BER_MASK) >> + USB4_MARGIN_CAP_1_MIN_BER_SHIFT; + margining->min_ber_level = val; + val = (margining->caps[1] & USB4_MARGIN_CAP_1_MAX_BER_MASK) >> + USB4_MARGIN_CAP_1_MAX_BER_SHIFT; + margining->max_ber_level = val; + + /* Set the default to minimum */ + margining->ber_level = margining->min_ber_level; + + debugfs_create_file("ber_level_contour", 0400, dir, port, + &margining_ber_level_fops); + } + debugfs_create_file("caps", 0400, dir, port, &margining_caps_fops); + debugfs_create_file("lanes", 0600, dir, port, &margining_lanes_fops); + debugfs_create_file("mode", 0600, dir, port, &margining_mode_fops); + debugfs_create_file("run", 0600, dir, port, &margining_run_fops); + debugfs_create_file("results", 0600, dir, port, &margining_results_fops); + debugfs_create_file("test", 0600, dir, port, &margining_test_fops); + if (independent_voltage_margins(usb4) || + (supports_time(usb4) && independent_time_margins(usb4))) + debugfs_create_file("margin", 0600, dir, port, &margining_margin_fops); +} + +static void margining_port_remove(struct tb_port *port) +{ + struct dentry *parent; + char dir_name[10]; + + if (!port->usb4) + return; + + snprintf(dir_name, sizeof(dir_name), "port%d", port->port); + parent = debugfs_lookup(dir_name, port->sw->debugfs_dir); + debugfs_remove_recursive(debugfs_lookup("margining", parent)); + + kfree(port->usb4->margining); + port->usb4->margining = NULL; +} + +static void margining_switch_init(struct tb_switch *sw) +{ + struct tb_port *upstream, *downstream; + struct tb_switch *parent_sw; + u64 route = tb_route(sw); + + if (!route) + return; + + upstream = tb_upstream_port(sw); + parent_sw = tb_switch_parent(sw); + downstream = tb_port_at(route, parent_sw); + + margining_port_init(downstream); + margining_port_init(upstream); +} + +static void margining_switch_remove(struct tb_switch *sw) +{ + struct tb_switch *parent_sw; + struct tb_port *downstream; + u64 route = tb_route(sw); + + if (!route) + return; + + /* + * Upstream is removed with the router itself but we need to + * remove the downstream port margining directory. + */ + parent_sw = tb_switch_parent(sw); + downstream = tb_port_at(route, parent_sw); + margining_port_remove(downstream); +} + +static void margining_xdomain_init(struct tb_xdomain *xd) +{ + struct tb_switch *parent_sw; + struct tb_port *downstream; + + parent_sw = tb_xdomain_parent(xd); + downstream = tb_port_at(xd->route, parent_sw); + + margining_port_init(downstream); +} + +static void margining_xdomain_remove(struct tb_xdomain *xd) +{ + struct tb_switch *parent_sw; + struct tb_port *downstream; + + parent_sw = tb_xdomain_parent(xd); + downstream = tb_port_at(xd->route, parent_sw); + margining_port_remove(downstream); +} +#else +static inline void margining_switch_init(struct tb_switch *sw) { } +static inline void margining_switch_remove(struct tb_switch *sw) { } +static inline void margining_xdomain_init(struct tb_xdomain *xd) { } +static inline void margining_xdomain_remove(struct tb_xdomain *xd) { } +#endif + static int port_clear_all_counters(struct tb_port *port) { u32 *buf; @@ -689,6 +1512,8 @@ void tb_switch_debugfs_init(struct tb_switch *sw) debugfs_create_file("counters", 0600, debugfs_dir, port, &counters_fops); } + + margining_switch_init(sw); } /** @@ -699,9 +1524,20 @@ void tb_switch_debugfs_init(struct tb_switch *sw) */ void tb_switch_debugfs_remove(struct tb_switch *sw) { + margining_switch_remove(sw); debugfs_remove_recursive(sw->debugfs_dir); } +void tb_xdomain_debugfs_init(struct tb_xdomain *xd) +{ + margining_xdomain_init(xd); +} + +void tb_xdomain_debugfs_remove(struct tb_xdomain *xd) +{ + margining_xdomain_remove(xd); +} + /** * tb_service_debugfs_init() - Add debugfs directory for service * @svc: Thunderbolt service pointer diff --git a/drivers/thunderbolt/domain.c b/drivers/thunderbolt/domain.c index 99211f35a5cd..ec7b5f65804e 100644 --- a/drivers/thunderbolt/domain.c +++ b/drivers/thunderbolt/domain.c @@ -144,11 +144,9 @@ static ssize_t boot_acl_show(struct device *dev, struct device_attribute *attr, for (ret = 0, i = 0; i < tb->nboot_acl; i++) { if (!uuid_is_null(&uuids[i])) - ret += scnprintf(buf + ret, PAGE_SIZE - ret, "%pUb", - &uuids[i]); + ret += sysfs_emit_at(buf, ret, "%pUb", &uuids[i]); - ret += scnprintf(buf + ret, PAGE_SIZE - ret, "%s", - i < tb->nboot_acl - 1 ? "," : "\n"); + ret += sysfs_emit_at(buf, ret, "%s", i < tb->nboot_acl - 1 ? "," : "\n"); } out: @@ -247,7 +245,7 @@ static ssize_t deauthorization_show(struct device *dev, tb->security_level == TB_SECURITY_SECURE) deauthorization = !!tb->cm_ops->disapprove_switch; - return sprintf(buf, "%d\n", deauthorization); + return sysfs_emit(buf, "%d\n", deauthorization); } static DEVICE_ATTR_RO(deauthorization); @@ -270,7 +268,7 @@ static ssize_t security_show(struct device *dev, struct device_attribute *attr, if (tb->security_level < ARRAY_SIZE(tb_security_names)) name = tb_security_names[tb->security_level]; - return sprintf(buf, "%s\n", name); + return sysfs_emit(buf, "%s\n", name); } static DEVICE_ATTR_RO(security); diff --git a/drivers/thunderbolt/icm.c b/drivers/thunderbolt/icm.c index 572b5896caa3..86521ebb2579 100644 --- a/drivers/thunderbolt/icm.c +++ b/drivers/thunderbolt/icm.c @@ -2518,6 +2518,9 @@ struct tb *icm_probe(struct tb_nhi *nhi) case PCI_DEVICE_ID_INTEL_ADL_NHI1: case PCI_DEVICE_ID_INTEL_RPL_NHI0: case PCI_DEVICE_ID_INTEL_RPL_NHI1: + case PCI_DEVICE_ID_INTEL_MTL_M_NHI0: + case PCI_DEVICE_ID_INTEL_MTL_P_NHI0: + case PCI_DEVICE_ID_INTEL_MTL_P_NHI1: icm->is_supported = icm_tgl_is_supported; icm->driver_ready = icm_icl_driver_ready; icm->set_uuid = icm_icl_set_uuid; diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c index b5cd9673e15d..4dce2edd86ea 100644 --- a/drivers/thunderbolt/nhi.c +++ b/drivers/thunderbolt/nhi.c @@ -1184,6 +1184,7 @@ static void nhi_check_iommu(struct tb_nhi *nhi) static int nhi_init_msi(struct tb_nhi *nhi) { struct pci_dev *pdev = nhi->pdev; + struct device *dev = &pdev->dev; int res, irq, nvec; /* In case someone left them on. */ @@ -1214,10 +1215,8 @@ static int nhi_init_msi(struct tb_nhi *nhi) res = devm_request_irq(&pdev->dev, irq, nhi_msi, IRQF_NO_SUSPEND, "thunderbolt", nhi); - if (res) { - dev_err(&pdev->dev, "request_irq failed, aborting\n"); - return res; - } + if (res) + return dev_err_probe(dev, res, "request_irq failed, aborting\n"); } return 0; @@ -1258,26 +1257,21 @@ static struct tb *nhi_select_cm(struct tb_nhi *nhi) static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id) { + struct device *dev = &pdev->dev; struct tb_nhi *nhi; struct tb *tb; int res; - if (!nhi_imr_valid(pdev)) { - dev_warn(&pdev->dev, "firmware image not valid, aborting\n"); - return -ENODEV; - } + if (!nhi_imr_valid(pdev)) + return dev_err_probe(dev, -ENODEV, "firmware image not valid, aborting\n"); res = pcim_enable_device(pdev); - if (res) { - dev_err(&pdev->dev, "cannot enable PCI device, aborting\n"); - return res; - } + if (res) + return dev_err_probe(dev, res, "cannot enable PCI device, aborting\n"); res = pcim_iomap_regions(pdev, 1 << 0, "thunderbolt"); - if (res) { - dev_err(&pdev->dev, "cannot obtain PCI resources, aborting\n"); - return res; - } + if (res) + return dev_err_probe(dev, res, "cannot obtain PCI resources, aborting\n"); nhi = devm_kzalloc(&pdev->dev, sizeof(*nhi), GFP_KERNEL); if (!nhi) @@ -1288,7 +1282,7 @@ static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id) /* cannot fail - table is allocated in pcim_iomap_regions */ nhi->iobase = pcim_iomap_table(pdev)[0]; nhi->hop_count = ioread32(nhi->iobase + REG_HOP_COUNT) & 0x3ff; - dev_dbg(&pdev->dev, "total paths: %d\n", nhi->hop_count); + dev_dbg(dev, "total paths: %d\n", nhi->hop_count); nhi->tx_rings = devm_kcalloc(&pdev->dev, nhi->hop_count, sizeof(*nhi->tx_rings), GFP_KERNEL); @@ -1301,18 +1295,14 @@ static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id) nhi_check_iommu(nhi); res = nhi_init_msi(nhi); - if (res) { - dev_err(&pdev->dev, "cannot enable MSI, aborting\n"); - return res; - } + if (res) + return dev_err_probe(dev, res, "cannot enable MSI, aborting\n"); spin_lock_init(&nhi->lock); res = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); - if (res) { - dev_err(&pdev->dev, "failed to set DMA mask\n"); - return res; - } + if (res) + return dev_err_probe(dev, res, "failed to set DMA mask\n"); pci_set_master(pdev); @@ -1323,13 +1313,11 @@ static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id) } tb = nhi_select_cm(nhi); - if (!tb) { - dev_err(&nhi->pdev->dev, + if (!tb) + return dev_err_probe(dev, -ENODEV, "failed to determine connection manager, aborting\n"); - return -ENODEV; - } - dev_dbg(&nhi->pdev->dev, "NHI initialized, starting thunderbolt\n"); + dev_dbg(dev, "NHI initialized, starting thunderbolt\n"); res = tb_domain_add(tb); if (res) { @@ -1433,6 +1421,7 @@ static struct pci_device_id nhi_ids[] = { .driver_data = (kernel_ulong_t)&icl_nhi_ops }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICL_NHI1), .driver_data = (kernel_ulong_t)&icl_nhi_ops }, + /* Thunderbolt 4 */ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGL_NHI0), .driver_data = (kernel_ulong_t)&icl_nhi_ops }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGL_NHI1), @@ -1449,6 +1438,12 @@ static struct pci_device_id nhi_ids[] = { .driver_data = (kernel_ulong_t)&icl_nhi_ops }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_RPL_NHI1), .driver_data = (kernel_ulong_t)&icl_nhi_ops }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTL_M_NHI0), + .driver_data = (kernel_ulong_t)&icl_nhi_ops }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTL_P_NHI0), + .driver_data = (kernel_ulong_t)&icl_nhi_ops }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTL_P_NHI1), + .driver_data = (kernel_ulong_t)&icl_nhi_ops }, /* Any USB4 compliant host */ { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_USB4, ~0) }, diff --git a/drivers/thunderbolt/nhi.h b/drivers/thunderbolt/nhi.h index 01190d9ced16..b0718020c6f5 100644 --- a/drivers/thunderbolt/nhi.h +++ b/drivers/thunderbolt/nhi.h @@ -75,6 +75,9 @@ extern const struct tb_nhi_ops icl_nhi_ops; #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_BRIDGE 0x15ef #define PCI_DEVICE_ID_INTEL_ADL_NHI0 0x463e #define PCI_DEVICE_ID_INTEL_ADL_NHI1 0x466d +#define PCI_DEVICE_ID_INTEL_MTL_M_NHI0 0x7eb2 +#define PCI_DEVICE_ID_INTEL_MTL_P_NHI0 0x7ec2 +#define PCI_DEVICE_ID_INTEL_MTL_P_NHI1 0x7ec3 #define PCI_DEVICE_ID_INTEL_ICL_NHI1 0x8a0d #define PCI_DEVICE_ID_INTEL_ICL_NHI0 0x8a17 #define PCI_DEVICE_ID_INTEL_TGL_NHI0 0x9a1b diff --git a/drivers/thunderbolt/nvm.c b/drivers/thunderbolt/nvm.c index b3f310389378..3dd5f81bd629 100644 --- a/drivers/thunderbolt/nvm.c +++ b/drivers/thunderbolt/nvm.c @@ -12,19 +12,315 @@ #include "tb.h" +/* Intel specific NVM offsets */ +#define INTEL_NVM_DEVID 0x05 +#define INTEL_NVM_VERSION 0x08 +#define INTEL_NVM_CSS 0x10 +#define INTEL_NVM_FLASH_SIZE 0x45 + +/* ASMedia specific NVM offsets */ +#define ASMEDIA_NVM_DATE 0x1c +#define ASMEDIA_NVM_VERSION 0x28 + static DEFINE_IDA(nvm_ida); +/** + * struct tb_nvm_vendor_ops - Vendor specific NVM operations + * @read_version: Reads out NVM version from the flash + * @validate: Validates the NVM image before update (optional) + * @write_headers: Writes headers before the rest of the image (optional) + */ +struct tb_nvm_vendor_ops { + int (*read_version)(struct tb_nvm *nvm); + int (*validate)(struct tb_nvm *nvm); + int (*write_headers)(struct tb_nvm *nvm); +}; + +/** + * struct tb_nvm_vendor - Vendor to &struct tb_nvm_vendor_ops mapping + * @vendor: Vendor ID + * @vops: Vendor specific NVM operations + * + * Maps vendor ID to NVM vendor operations. If there is no mapping then + * NVM firmware upgrade is disabled for the device. + */ +struct tb_nvm_vendor { + u16 vendor; + const struct tb_nvm_vendor_ops *vops; +}; + +static int intel_switch_nvm_version(struct tb_nvm *nvm) +{ + struct tb_switch *sw = tb_to_switch(nvm->dev); + u32 val, nvm_size, hdr_size; + int ret; + + /* + * If the switch is in safe-mode the only accessible portion of + * the NVM is the non-active one where userspace is expected to + * write new functional NVM. + */ + if (sw->safe_mode) + return 0; + + ret = tb_switch_nvm_read(sw, INTEL_NVM_FLASH_SIZE, &val, sizeof(val)); + if (ret) + return ret; + + hdr_size = sw->generation < 3 ? SZ_8K : SZ_16K; + nvm_size = (SZ_1M << (val & 7)) / 8; + nvm_size = (nvm_size - hdr_size) / 2; + + ret = tb_switch_nvm_read(sw, INTEL_NVM_VERSION, &val, sizeof(val)); + if (ret) + return ret; + + nvm->major = (val >> 16) & 0xff; + nvm->minor = (val >> 8) & 0xff; + nvm->active_size = nvm_size; + + return 0; +} + +static int intel_switch_nvm_validate(struct tb_nvm *nvm) +{ + struct tb_switch *sw = tb_to_switch(nvm->dev); + unsigned int image_size, hdr_size; + u16 ds_size, device_id; + u8 *buf = nvm->buf; + + image_size = nvm->buf_data_size; + + /* + * FARB pointer must point inside the image and must at least + * contain parts of the digital section we will be reading here. + */ + hdr_size = (*(u32 *)buf) & 0xffffff; + if (hdr_size + INTEL_NVM_DEVID + 2 >= image_size) + return -EINVAL; + + /* Digital section start should be aligned to 4k page */ + if (!IS_ALIGNED(hdr_size, SZ_4K)) + return -EINVAL; + + /* + * Read digital section size and check that it also fits inside + * the image. + */ + ds_size = *(u16 *)(buf + hdr_size); + if (ds_size >= image_size) + return -EINVAL; + + if (sw->safe_mode) + return 0; + + /* + * Make sure the device ID in the image matches the one + * we read from the switch config space. + */ + device_id = *(u16 *)(buf + hdr_size + INTEL_NVM_DEVID); + if (device_id != sw->config.device_id) + return -EINVAL; + + /* Skip headers in the image */ + nvm->buf_data_start = buf + hdr_size; + nvm->buf_data_size = image_size - hdr_size; + + return 0; +} + +static int intel_switch_nvm_write_headers(struct tb_nvm *nvm) +{ + struct tb_switch *sw = tb_to_switch(nvm->dev); + + if (sw->generation < 3) { + int ret; + + /* Write CSS headers first */ + ret = dma_port_flash_write(sw->dma_port, + DMA_PORT_CSS_ADDRESS, nvm->buf + INTEL_NVM_CSS, + DMA_PORT_CSS_MAX_SIZE); + if (ret) + return ret; + } + + return 0; +} + +static const struct tb_nvm_vendor_ops intel_switch_nvm_ops = { + .read_version = intel_switch_nvm_version, + .validate = intel_switch_nvm_validate, + .write_headers = intel_switch_nvm_write_headers, +}; + +static int asmedia_switch_nvm_version(struct tb_nvm *nvm) +{ + struct tb_switch *sw = tb_to_switch(nvm->dev); + u32 val; + int ret; + + ret = tb_switch_nvm_read(sw, ASMEDIA_NVM_VERSION, &val, sizeof(val)); + if (ret) + return ret; + + nvm->major = (val << 16) & 0xff0000; + nvm->major |= val & 0x00ff00; + nvm->major |= (val >> 16) & 0x0000ff; + + ret = tb_switch_nvm_read(sw, ASMEDIA_NVM_DATE, &val, sizeof(val)); + if (ret) + return ret; + + nvm->minor = (val << 16) & 0xff0000; + nvm->minor |= val & 0x00ff00; + nvm->minor |= (val >> 16) & 0x0000ff; + + /* ASMedia NVM size is fixed to 512k */ + nvm->active_size = SZ_512K; + + return 0; +} + +static const struct tb_nvm_vendor_ops asmedia_switch_nvm_ops = { + .read_version = asmedia_switch_nvm_version, +}; + +/* Router vendor NVM support table */ +static const struct tb_nvm_vendor switch_nvm_vendors[] = { + { 0x174c, &asmedia_switch_nvm_ops }, + { PCI_VENDOR_ID_INTEL, &intel_switch_nvm_ops }, + { 0x8087, &intel_switch_nvm_ops }, +}; + +static int intel_retimer_nvm_version(struct tb_nvm *nvm) +{ + struct tb_retimer *rt = tb_to_retimer(nvm->dev); + u32 val, nvm_size; + int ret; + + ret = tb_retimer_nvm_read(rt, INTEL_NVM_VERSION, &val, sizeof(val)); + if (ret) + return ret; + + nvm->major = (val >> 16) & 0xff; + nvm->minor = (val >> 8) & 0xff; + + ret = tb_retimer_nvm_read(rt, INTEL_NVM_FLASH_SIZE, &val, sizeof(val)); + if (ret) + return ret; + + nvm_size = (SZ_1M << (val & 7)) / 8; + nvm_size = (nvm_size - SZ_16K) / 2; + nvm->active_size = nvm_size; + + return 0; +} + +static int intel_retimer_nvm_validate(struct tb_nvm *nvm) +{ + struct tb_retimer *rt = tb_to_retimer(nvm->dev); + unsigned int image_size, hdr_size; + u8 *buf = nvm->buf; + u16 ds_size, device; + + image_size = nvm->buf_data_size; + + /* + * FARB pointer must point inside the image and must at least + * contain parts of the digital section we will be reading here. + */ + hdr_size = (*(u32 *)buf) & 0xffffff; + if (hdr_size + INTEL_NVM_DEVID + 2 >= image_size) + return -EINVAL; + + /* Digital section start should be aligned to 4k page */ + if (!IS_ALIGNED(hdr_size, SZ_4K)) + return -EINVAL; + + /* + * Read digital section size and check that it also fits inside + * the image. + */ + ds_size = *(u16 *)(buf + hdr_size); + if (ds_size >= image_size) + return -EINVAL; + + /* + * Make sure the device ID in the image matches the retimer + * hardware. + */ + device = *(u16 *)(buf + hdr_size + INTEL_NVM_DEVID); + if (device != rt->device) + return -EINVAL; + + /* Skip headers in the image */ + nvm->buf_data_start = buf + hdr_size; + nvm->buf_data_size = image_size - hdr_size; + + return 0; +} + +static const struct tb_nvm_vendor_ops intel_retimer_nvm_ops = { + .read_version = intel_retimer_nvm_version, + .validate = intel_retimer_nvm_validate, +}; + +/* Retimer vendor NVM support table */ +static const struct tb_nvm_vendor retimer_nvm_vendors[] = { + { 0x8087, &intel_retimer_nvm_ops }, +}; + /** * tb_nvm_alloc() - Allocate new NVM structure * @dev: Device owning the NVM * * Allocates new NVM structure with unique @id and returns it. In case - * of error returns ERR_PTR(). + * of error returns ERR_PTR(). Specifically returns %-EOPNOTSUPP if the + * NVM format of the @dev is not known by the kernel. */ struct tb_nvm *tb_nvm_alloc(struct device *dev) { + const struct tb_nvm_vendor_ops *vops = NULL; struct tb_nvm *nvm; - int ret; + int ret, i; + + if (tb_is_switch(dev)) { + const struct tb_switch *sw = tb_to_switch(dev); + + for (i = 0; i < ARRAY_SIZE(switch_nvm_vendors); i++) { + const struct tb_nvm_vendor *v = &switch_nvm_vendors[i]; + + if (v->vendor == sw->config.vendor_id) { + vops = v->vops; + break; + } + } + + if (!vops) { + tb_sw_dbg(sw, "router NVM format of vendor %#x unknown\n", + sw->config.vendor_id); + return ERR_PTR(-EOPNOTSUPP); + } + } else if (tb_is_retimer(dev)) { + const struct tb_retimer *rt = tb_to_retimer(dev); + + for (i = 0; i < ARRAY_SIZE(retimer_nvm_vendors); i++) { + const struct tb_nvm_vendor *v = &retimer_nvm_vendors[i]; + + if (v->vendor == rt->vendor) { + vops = v->vops; + break; + } + } + + if (!vops) { + dev_dbg(dev, "retimer NVM format of vendor %#x unknown\n", + rt->vendor); + return ERR_PTR(-EOPNOTSUPP); + } + } else { + return ERR_PTR(-EOPNOTSUPP); + } nvm = kzalloc(sizeof(*nvm), GFP_KERNEL); if (!nvm) @@ -38,14 +334,85 @@ struct tb_nvm *tb_nvm_alloc(struct device *dev) nvm->id = ret; nvm->dev = dev; + nvm->vops = vops; return nvm; } +/** + * tb_nvm_read_version() - Read and populate NVM version + * @nvm: NVM structure + * + * Uses vendor specific means to read out and fill in the existing + * active NVM version. Returns %0 in case of success and negative errno + * otherwise. + */ +int tb_nvm_read_version(struct tb_nvm *nvm) +{ + const struct tb_nvm_vendor_ops *vops = nvm->vops; + + if (vops && vops->read_version) + return vops->read_version(nvm); + + return -EOPNOTSUPP; +} + +/** + * tb_nvm_validate() - Validate new NVM image + * @nvm: NVM structure + * + * Runs vendor specific validation over the new NVM image and if all + * checks pass returns %0. As side effect updates @nvm->buf_data_start + * and @nvm->buf_data_size fields to match the actual data to be written + * to the NVM. + * + * If the validation does not pass then returns negative errno. + */ +int tb_nvm_validate(struct tb_nvm *nvm) +{ + const struct tb_nvm_vendor_ops *vops = nvm->vops; + unsigned int image_size; + u8 *buf = nvm->buf; + + if (!buf) + return -EINVAL; + if (!vops) + return -EOPNOTSUPP; + + /* Just do basic image size checks */ + image_size = nvm->buf_data_size; + if (image_size < NVM_MIN_SIZE || image_size > NVM_MAX_SIZE) + return -EINVAL; + + /* + * Set the default data start in the buffer. The validate method + * below can change this if needed. + */ + nvm->buf_data_start = buf; + + return vops->validate ? vops->validate(nvm) : 0; +} + +/** + * tb_nvm_write_headers() - Write headers before the rest of the image + * @nvm: NVM structure + * + * If the vendor NVM format requires writing headers before the rest of + * the image, this function does that. Can be called even if the device + * does not need this. + * + * Returns %0 in case of success and negative errno otherwise. + */ +int tb_nvm_write_headers(struct tb_nvm *nvm) +{ + const struct tb_nvm_vendor_ops *vops = nvm->vops; + + return vops->write_headers ? vops->write_headers(nvm) : 0; +} + /** * tb_nvm_add_active() - Adds active NVMem device to NVM * @nvm: NVM structure - * @size: Size of the active NVM in bytes * @reg_read: Pointer to the function to read the NVM (passed directly to the * NVMem device) * @@ -54,7 +421,7 @@ struct tb_nvm *tb_nvm_alloc(struct device *dev) * needed. The first parameter passed to @reg_read is @nvm structure. * Returns %0 in success and negative errno otherwise. */ -int tb_nvm_add_active(struct tb_nvm *nvm, size_t size, nvmem_reg_read_t reg_read) +int tb_nvm_add_active(struct tb_nvm *nvm, nvmem_reg_read_t reg_read) { struct nvmem_config config; struct nvmem_device *nvmem; @@ -67,7 +434,7 @@ int tb_nvm_add_active(struct tb_nvm *nvm, size_t size, nvmem_reg_read_t reg_read config.id = nvm->id; config.stride = 4; config.word_size = 4; - config.size = size; + config.size = nvm->active_size; config.dev = nvm->dev; config.owner = THIS_MODULE; config.priv = nvm; @@ -109,17 +476,17 @@ int tb_nvm_write_buf(struct tb_nvm *nvm, unsigned int offset, void *val, /** * tb_nvm_add_non_active() - Adds non-active NVMem device to NVM * @nvm: NVM structure - * @size: Size of the non-active NVM in bytes * @reg_write: Pointer to the function to write the NVM (passed directly * to the NVMem device) * * Registers new non-active NVmem device for @nvm. The @reg_write is called * directly from NVMem so it must handle possible concurrent access if * needed. The first parameter passed to @reg_write is @nvm structure. + * The size of the NVMem device is set to %NVM_MAX_SIZE. + * * Returns %0 in success and negative errno otherwise. */ -int tb_nvm_add_non_active(struct tb_nvm *nvm, size_t size, - nvmem_reg_write_t reg_write) +int tb_nvm_add_non_active(struct tb_nvm *nvm, nvmem_reg_write_t reg_write) { struct nvmem_config config; struct nvmem_device *nvmem; @@ -132,7 +499,7 @@ int tb_nvm_add_non_active(struct tb_nvm *nvm, size_t size, config.id = nvm->id; config.stride = 4; config.word_size = 4; - config.size = size; + config.size = NVM_MAX_SIZE; config.dev = nvm->dev; config.owner = THIS_MODULE; config.priv = nvm; diff --git a/drivers/thunderbolt/retimer.c b/drivers/thunderbolt/retimer.c index 8c29bd556ae0..81252e31014a 100644 --- a/drivers/thunderbolt/retimer.c +++ b/drivers/thunderbolt/retimer.c @@ -16,8 +16,23 @@ #define TB_MAX_RETIMER_INDEX 6 -static int tb_retimer_nvm_read(void *priv, unsigned int offset, void *val, - size_t bytes) +/** + * tb_retimer_nvm_read() - Read contents of retimer NVM + * @rt: Retimer device + * @address: NVM address (in bytes) to start reading + * @buf: Data read from NVM is stored here + * @size: Number of bytes to read + * + * Reads retimer NVM and copies the contents to @buf. Returns %0 if the + * read was successful and negative errno in case of failure. + */ +int tb_retimer_nvm_read(struct tb_retimer *rt, unsigned int address, void *buf, + size_t size) +{ + return usb4_port_retimer_nvm_read(rt->port, rt->index, address, buf, size); +} + +static int nvm_read(void *priv, unsigned int offset, void *val, size_t bytes) { struct tb_nvm *nvm = priv; struct tb_retimer *rt = tb_to_retimer(nvm->dev); @@ -30,7 +45,7 @@ static int tb_retimer_nvm_read(void *priv, unsigned int offset, void *val, goto out; } - ret = usb4_port_retimer_nvm_read(rt->port, rt->index, offset, val, bytes); + ret = tb_retimer_nvm_read(rt, offset, val, bytes); mutex_unlock(&rt->tb->lock); out: @@ -40,8 +55,7 @@ out: return ret; } -static int tb_retimer_nvm_write(void *priv, unsigned int offset, void *val, - size_t bytes) +static int nvm_write(void *priv, unsigned int offset, void *val, size_t bytes) { struct tb_nvm *nvm = priv; struct tb_retimer *rt = tb_to_retimer(nvm->dev); @@ -59,34 +73,23 @@ static int tb_retimer_nvm_write(void *priv, unsigned int offset, void *val, static int tb_retimer_nvm_add(struct tb_retimer *rt) { struct tb_nvm *nvm; - u32 val, nvm_size; int ret; nvm = tb_nvm_alloc(&rt->dev); - if (IS_ERR(nvm)) - return PTR_ERR(nvm); + if (IS_ERR(nvm)) { + ret = PTR_ERR(nvm) == -EOPNOTSUPP ? 0 : PTR_ERR(nvm); + goto err_nvm; + } - ret = usb4_port_retimer_nvm_read(rt->port, rt->index, NVM_VERSION, &val, - sizeof(val)); + ret = tb_nvm_read_version(nvm); if (ret) goto err_nvm; - nvm->major = val >> 16; - nvm->minor = val >> 8; - - ret = usb4_port_retimer_nvm_read(rt->port, rt->index, NVM_FLASH_SIZE, - &val, sizeof(val)); + ret = tb_nvm_add_active(nvm, nvm_read); if (ret) goto err_nvm; - nvm_size = (SZ_1M << (val & 7)) / 8; - nvm_size = (nvm_size - SZ_16K) / 2; - - ret = tb_nvm_add_active(nvm, nvm_size, tb_retimer_nvm_read); - if (ret) - goto err_nvm; - - ret = tb_nvm_add_non_active(nvm, NVM_MAX_SIZE, tb_retimer_nvm_write); + ret = tb_nvm_add_non_active(nvm, nvm_write); if (ret) goto err_nvm; @@ -94,59 +97,33 @@ static int tb_retimer_nvm_add(struct tb_retimer *rt) return 0; err_nvm: - tb_nvm_free(nvm); + dev_dbg(&rt->dev, "NVM upgrade disabled\n"); + if (!IS_ERR(nvm)) + tb_nvm_free(nvm); + return ret; } static int tb_retimer_nvm_validate_and_write(struct tb_retimer *rt) { - unsigned int image_size, hdr_size; - const u8 *buf = rt->nvm->buf; - u16 ds_size, device; + unsigned int image_size; + const u8 *buf; int ret; + ret = tb_nvm_validate(rt->nvm); + if (ret) + return ret; + + buf = rt->nvm->buf_data_start; image_size = rt->nvm->buf_data_size; - if (image_size < NVM_MIN_SIZE || image_size > NVM_MAX_SIZE) - return -EINVAL; - - /* - * FARB pointer must point inside the image and must at least - * contain parts of the digital section we will be reading here. - */ - hdr_size = (*(u32 *)buf) & 0xffffff; - if (hdr_size + NVM_DEVID + 2 >= image_size) - return -EINVAL; - - /* Digital section start should be aligned to 4k page */ - if (!IS_ALIGNED(hdr_size, SZ_4K)) - return -EINVAL; - - /* - * Read digital section size and check that it also fits inside - * the image. - */ - ds_size = *(u16 *)(buf + hdr_size); - if (ds_size >= image_size) - return -EINVAL; - - /* - * Make sure the device ID in the image matches the retimer - * hardware. - */ - device = *(u16 *)(buf + hdr_size + NVM_DEVID); - if (device != rt->device) - return -EINVAL; - - /* Skip headers in the image */ - buf += hdr_size; - image_size -= hdr_size; ret = usb4_port_retimer_nvm_write(rt->port, rt->index, 0, buf, image_size); - if (!ret) - rt->nvm->flushed = true; + if (ret) + return ret; - return ret; + rt->nvm->flushed = true; + return 0; } static int tb_retimer_nvm_authenticate(struct tb_retimer *rt, bool auth_only) @@ -185,7 +162,7 @@ static ssize_t device_show(struct device *dev, struct device_attribute *attr, { struct tb_retimer *rt = tb_to_retimer(dev); - return sprintf(buf, "%#x\n", rt->device); + return sysfs_emit(buf, "%#x\n", rt->device); } static DEVICE_ATTR_RO(device); @@ -200,8 +177,10 @@ static ssize_t nvm_authenticate_show(struct device *dev, if (!rt->nvm) ret = -EAGAIN; + else if (rt->no_nvm_upgrade) + ret = -EOPNOTSUPP; else - ret = sprintf(buf, "%#x\n", rt->auth_status); + ret = sysfs_emit(buf, "%#x\n", rt->auth_status); mutex_unlock(&rt->tb->lock); @@ -276,7 +255,7 @@ static ssize_t nvm_version_show(struct device *dev, if (!rt->nvm) ret = -EAGAIN; else - ret = sprintf(buf, "%x.%x\n", rt->nvm->major, rt->nvm->minor); + ret = sysfs_emit(buf, "%x.%x\n", rt->nvm->major, rt->nvm->minor); mutex_unlock(&rt->tb->lock); return ret; @@ -288,7 +267,7 @@ static ssize_t vendor_show(struct device *dev, struct device_attribute *attr, { struct tb_retimer *rt = tb_to_retimer(dev); - return sprintf(buf, "%#x\n", rt->vendor); + return sysfs_emit(buf, "%#x\n", rt->vendor); } static DEVICE_ATTR_RO(vendor); diff --git a/drivers/thunderbolt/sb_regs.h b/drivers/thunderbolt/sb_regs.h index bda889ff3bda..5185cf3e4d97 100644 --- a/drivers/thunderbolt/sb_regs.h +++ b/drivers/thunderbolt/sb_regs.h @@ -26,10 +26,68 @@ enum usb4_sb_opcode { USB4_SB_OPCODE_NVM_BLOCK_WRITE = 0x574b4c42, /* "BLKW" */ USB4_SB_OPCODE_NVM_AUTH_WRITE = 0x48545541, /* "AUTH" */ USB4_SB_OPCODE_NVM_READ = 0x52524641, /* "AFRR" */ + USB4_SB_OPCODE_READ_LANE_MARGINING_CAP = 0x50434452, /* "RDCP" */ + USB4_SB_OPCODE_RUN_HW_LANE_MARGINING = 0x474d4852, /* "RHMG" */ + USB4_SB_OPCODE_RUN_SW_LANE_MARGINING = 0x474d5352, /* "RSMG" */ + USB4_SB_OPCODE_READ_SW_MARGIN_ERR = 0x57534452, /* "RDSW" */ }; #define USB4_SB_METADATA 0x09 #define USB4_SB_METADATA_NVM_AUTH_WRITE_MASK GENMASK(5, 0) #define USB4_SB_DATA 0x12 +/* USB4_SB_OPCODE_READ_LANE_MARGINING_CAP */ +#define USB4_MARGIN_CAP_0_MODES_HW BIT(0) +#define USB4_MARGIN_CAP_0_MODES_SW BIT(1) +#define USB4_MARGIN_CAP_0_2_LANES BIT(2) +#define USB4_MARGIN_CAP_0_VOLTAGE_INDP_MASK GENMASK(4, 3) +#define USB4_MARGIN_CAP_0_VOLTAGE_INDP_SHIFT 3 +#define USB4_MARGIN_CAP_0_VOLTAGE_MIN 0x0 +#define USB4_MARGIN_CAP_0_VOLTAGE_HL 0x1 +#define USB4_MARGIN_CAP_0_VOLTAGE_BOTH 0x2 +#define USB4_MARGIN_CAP_0_TIME BIT(5) +#define USB4_MARGIN_CAP_0_VOLTAGE_STEPS_MASK GENMASK(12, 6) +#define USB4_MARGIN_CAP_0_VOLTAGE_STEPS_SHIFT 6 +#define USB4_MARGIN_CAP_0_MAX_VOLTAGE_OFFSET_MASK GENMASK(18, 13) +#define USB4_MARGIN_CAP_0_MAX_VOLTAGE_OFFSET_SHIFT 13 +#define USB4_MARGIN_CAP_1_TIME_DESTR BIT(8) +#define USB4_MARGIN_CAP_1_TIME_INDP_MASK GENMASK(10, 9) +#define USB4_MARGIN_CAP_1_TIME_INDP_SHIFT 9 +#define USB4_MARGIN_CAP_1_TIME_MIN 0x0 +#define USB4_MARGIN_CAP_1_TIME_LR 0x1 +#define USB4_MARGIN_CAP_1_TIME_BOTH 0x2 +#define USB4_MARGIN_CAP_1_TIME_STEPS_MASK GENMASK(15, 11) +#define USB4_MARGIN_CAP_1_TIME_STEPS_SHIFT 11 +#define USB4_MARGIN_CAP_1_TIME_OFFSET_MASK GENMASK(20, 16) +#define USB4_MARGIN_CAP_1_TIME_OFFSET_SHIFT 16 +#define USB4_MARGIN_CAP_1_MIN_BER_MASK GENMASK(25, 21) +#define USB4_MARGIN_CAP_1_MIN_BER_SHIFT 21 +#define USB4_MARGIN_CAP_1_MAX_BER_MASK GENMASK(30, 26) +#define USB4_MARGIN_CAP_1_MAX_BER_SHIFT 26 +#define USB4_MARGIN_CAP_1_MAX_BER_SHIFT 26 + +/* USB4_SB_OPCODE_RUN_HW_LANE_MARGINING */ +#define USB4_MARGIN_HW_TIME BIT(3) +#define USB4_MARGIN_HW_RH BIT(4) +#define USB4_MARGIN_HW_BER_MASK GENMASK(9, 5) +#define USB4_MARGIN_HW_BER_SHIFT 5 + +/* Applicable to all margin values */ +#define USB4_MARGIN_HW_RES_1_MARGIN_MASK GENMASK(6, 0) +#define USB4_MARGIN_HW_RES_1_EXCEEDS BIT(7) +/* Different lane margin shifts */ +#define USB4_MARGIN_HW_RES_1_L0_LL_MARGIN_SHIFT 8 +#define USB4_MARGIN_HW_RES_1_L1_RH_MARGIN_SHIFT 16 +#define USB4_MARGIN_HW_RES_1_L1_LL_MARGIN_SHIFT 24 + +/* USB4_SB_OPCODE_RUN_SW_LANE_MARGINING */ +#define USB4_MARGIN_SW_TIME BIT(3) +#define USB4_MARGIN_SW_RH BIT(4) +#define USB4_MARGIN_SW_COUNTER_MASK GENMASK(14, 13) +#define USB4_MARGIN_SW_COUNTER_SHIFT 13 +#define USB4_MARGIN_SW_COUNTER_NOP 0x0 +#define USB4_MARGIN_SW_COUNTER_CLEAR 0x1 +#define USB4_MARGIN_SW_COUNTER_START 0x2 +#define USB4_MARGIN_SW_COUNTER_STOP 0x3 + #endif diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index 77d7f07ca075..60da5c23ccaf 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -19,8 +19,6 @@ /* Switch NVM support */ -#define NVM_CSS 0x10 - struct nvm_auth_status { struct list_head list; uuid_t uuid; @@ -102,70 +100,30 @@ static void nvm_clear_auth_status(const struct tb_switch *sw) static int nvm_validate_and_write(struct tb_switch *sw) { - unsigned int image_size, hdr_size; - const u8 *buf = sw->nvm->buf; - u16 ds_size; + unsigned int image_size; + const u8 *buf; int ret; - if (!buf) - return -EINVAL; + ret = tb_nvm_validate(sw->nvm); + if (ret) + return ret; + ret = tb_nvm_write_headers(sw->nvm); + if (ret) + return ret; + + buf = sw->nvm->buf_data_start; image_size = sw->nvm->buf_data_size; - if (image_size < NVM_MIN_SIZE || image_size > NVM_MAX_SIZE) - return -EINVAL; - - /* - * FARB pointer must point inside the image and must at least - * contain parts of the digital section we will be reading here. - */ - hdr_size = (*(u32 *)buf) & 0xffffff; - if (hdr_size + NVM_DEVID + 2 >= image_size) - return -EINVAL; - - /* Digital section start should be aligned to 4k page */ - if (!IS_ALIGNED(hdr_size, SZ_4K)) - return -EINVAL; - - /* - * Read digital section size and check that it also fits inside - * the image. - */ - ds_size = *(u16 *)(buf + hdr_size); - if (ds_size >= image_size) - return -EINVAL; - - if (!sw->safe_mode) { - u16 device_id; - - /* - * Make sure the device ID in the image matches the one - * we read from the switch config space. - */ - device_id = *(u16 *)(buf + hdr_size + NVM_DEVID); - if (device_id != sw->config.device_id) - return -EINVAL; - - if (sw->generation < 3) { - /* Write CSS headers first */ - ret = dma_port_flash_write(sw->dma_port, - DMA_PORT_CSS_ADDRESS, buf + NVM_CSS, - DMA_PORT_CSS_MAX_SIZE); - if (ret) - return ret; - } - - /* Skip headers in the image */ - buf += hdr_size; - image_size -= hdr_size; - } if (tb_switch_is_usb4(sw)) ret = usb4_switch_nvm_write(sw, 0, buf, image_size); else ret = dma_port_flash_write(sw->dma_port, 0, buf, image_size); - if (!ret) - sw->nvm->flushed = true; - return ret; + if (ret) + return ret; + + sw->nvm->flushed = true; + return 0; } static int nvm_authenticate_host_dma_port(struct tb_switch *sw) @@ -300,14 +258,6 @@ static inline bool nvm_upgradeable(struct tb_switch *sw) return nvm_readable(sw); } -static inline int nvm_read(struct tb_switch *sw, unsigned int address, - void *buf, size_t size) -{ - if (tb_switch_is_usb4(sw)) - return usb4_switch_nvm_read(sw, address, buf, size); - return dma_port_flash_read(sw->dma_port, address, buf, size); -} - static int nvm_authenticate(struct tb_switch *sw, bool auth_only) { int ret; @@ -335,8 +285,26 @@ static int nvm_authenticate(struct tb_switch *sw, bool auth_only) return ret; } -static int tb_switch_nvm_read(void *priv, unsigned int offset, void *val, - size_t bytes) +/** + * tb_switch_nvm_read() - Read router NVM + * @sw: Router whose NVM to read + * @address: Start address on the NVM + * @buf: Buffer where the read data is copied + * @size: Size of the buffer in bytes + * + * Reads from router NVM and returns the requested data in @buf. Locking + * is up to the caller. Returns %0 in success and negative errno in case + * of failure. + */ +int tb_switch_nvm_read(struct tb_switch *sw, unsigned int address, void *buf, + size_t size) +{ + if (tb_switch_is_usb4(sw)) + return usb4_switch_nvm_read(sw, address, buf, size); + return dma_port_flash_read(sw->dma_port, address, buf, size); +} + +static int nvm_read(void *priv, unsigned int offset, void *val, size_t bytes) { struct tb_nvm *nvm = priv; struct tb_switch *sw = tb_to_switch(nvm->dev); @@ -349,7 +317,7 @@ static int tb_switch_nvm_read(void *priv, unsigned int offset, void *val, goto out; } - ret = nvm_read(sw, offset, val, bytes); + ret = tb_switch_nvm_read(sw, offset, val, bytes); mutex_unlock(&sw->tb->lock); out: @@ -359,8 +327,7 @@ out: return ret; } -static int tb_switch_nvm_write(void *priv, unsigned int offset, void *val, - size_t bytes) +static int nvm_write(void *priv, unsigned int offset, void *val, size_t bytes) { struct tb_nvm *nvm = priv; struct tb_switch *sw = tb_to_switch(nvm->dev); @@ -384,28 +351,20 @@ static int tb_switch_nvm_write(void *priv, unsigned int offset, void *val, static int tb_switch_nvm_add(struct tb_switch *sw) { struct tb_nvm *nvm; - u32 val; int ret; if (!nvm_readable(sw)) return 0; - /* - * The NVM format of non-Intel hardware is not known so - * currently restrict NVM upgrade for Intel hardware. We may - * relax this in the future when we learn other NVM formats. - */ - if (sw->config.vendor_id != PCI_VENDOR_ID_INTEL && - sw->config.vendor_id != 0x8087) { - dev_info(&sw->dev, - "NVM format of vendor %#x is not known, disabling NVM upgrade\n", - sw->config.vendor_id); - return 0; + nvm = tb_nvm_alloc(&sw->dev); + if (IS_ERR(nvm)) { + ret = PTR_ERR(nvm) == -EOPNOTSUPP ? 0 : PTR_ERR(nvm); + goto err_nvm; } - nvm = tb_nvm_alloc(&sw->dev); - if (IS_ERR(nvm)) - return PTR_ERR(nvm); + ret = tb_nvm_read_version(nvm); + if (ret) + goto err_nvm; /* * If the switch is in safe-mode the only accessible portion of @@ -413,31 +372,13 @@ static int tb_switch_nvm_add(struct tb_switch *sw) * write new functional NVM. */ if (!sw->safe_mode) { - u32 nvm_size, hdr_size; - - ret = nvm_read(sw, NVM_FLASH_SIZE, &val, sizeof(val)); - if (ret) - goto err_nvm; - - hdr_size = sw->generation < 3 ? SZ_8K : SZ_16K; - nvm_size = (SZ_1M << (val & 7)) / 8; - nvm_size = (nvm_size - hdr_size) / 2; - - ret = nvm_read(sw, NVM_VERSION, &val, sizeof(val)); - if (ret) - goto err_nvm; - - nvm->major = val >> 16; - nvm->minor = val >> 8; - - ret = tb_nvm_add_active(nvm, nvm_size, tb_switch_nvm_read); + ret = tb_nvm_add_active(nvm, nvm_read); if (ret) goto err_nvm; } if (!sw->no_nvm_upgrade) { - ret = tb_nvm_add_non_active(nvm, NVM_MAX_SIZE, - tb_switch_nvm_write); + ret = tb_nvm_add_non_active(nvm, nvm_write); if (ret) goto err_nvm; } @@ -446,7 +387,11 @@ static int tb_switch_nvm_add(struct tb_switch *sw) return 0; err_nvm: - tb_nvm_free(nvm); + tb_sw_dbg(sw, "NVM upgrade disabled\n"); + sw->no_nvm_upgrade = true; + if (!IS_ERR(nvm)) + tb_nvm_free(nvm); + return ret; } @@ -1229,6 +1174,135 @@ int tb_port_update_credits(struct tb_port *port) return tb_port_do_update_credits(port->dual_link_port); } +static int __tb_port_pm_secondary_set(struct tb_port *port, bool secondary) +{ + u32 phy; + int ret; + + ret = tb_port_read(port, &phy, TB_CFG_PORT, + port->cap_phy + LANE_ADP_CS_1, 1); + if (ret) + return ret; + + if (secondary) + phy |= LANE_ADP_CS_1_PMS; + else + phy &= ~LANE_ADP_CS_1_PMS; + + return tb_port_write(port, &phy, TB_CFG_PORT, + port->cap_phy + LANE_ADP_CS_1, 1); +} + +static int tb_port_pm_secondary_enable(struct tb_port *port) +{ + return __tb_port_pm_secondary_set(port, true); +} + +static int tb_port_pm_secondary_disable(struct tb_port *port) +{ + return __tb_port_pm_secondary_set(port, false); +} + +/* Called for USB4 or Titan Ridge routers only */ +static bool tb_port_clx_supported(struct tb_port *port, unsigned int clx_mask) +{ + u32 val, mask = 0; + bool ret; + + /* Don't enable CLx in case of two single-lane links */ + if (!port->bonded && port->dual_link_port) + return false; + + /* Don't enable CLx in case of inter-domain link */ + if (port->xdomain) + return false; + + if (tb_switch_is_usb4(port->sw)) { + if (!usb4_port_clx_supported(port)) + return false; + } else if (!tb_lc_is_clx_supported(port)) { + return false; + } + + if (clx_mask & TB_CL1) { + /* CL0s and CL1 are enabled and supported together */ + mask |= LANE_ADP_CS_0_CL0S_SUPPORT | LANE_ADP_CS_0_CL1_SUPPORT; + } + if (clx_mask & TB_CL2) + mask |= LANE_ADP_CS_0_CL2_SUPPORT; + + ret = tb_port_read(port, &val, TB_CFG_PORT, + port->cap_phy + LANE_ADP_CS_0, 1); + if (ret) + return false; + + return !!(val & mask); +} + +static int __tb_port_clx_set(struct tb_port *port, enum tb_clx clx, bool enable) +{ + u32 phy, mask; + int ret; + + /* CL0s and CL1 are enabled and supported together */ + if (clx == TB_CL1) + mask = LANE_ADP_CS_1_CL0S_ENABLE | LANE_ADP_CS_1_CL1_ENABLE; + else + /* For now we support only CL0s and CL1. Not CL2 */ + return -EOPNOTSUPP; + + ret = tb_port_read(port, &phy, TB_CFG_PORT, + port->cap_phy + LANE_ADP_CS_1, 1); + if (ret) + return ret; + + if (enable) + phy |= mask; + else + phy &= ~mask; + + return tb_port_write(port, &phy, TB_CFG_PORT, + port->cap_phy + LANE_ADP_CS_1, 1); +} + +static int tb_port_clx_disable(struct tb_port *port, enum tb_clx clx) +{ + return __tb_port_clx_set(port, clx, false); +} + +static int tb_port_clx_enable(struct tb_port *port, enum tb_clx clx) +{ + return __tb_port_clx_set(port, clx, true); +} + +/** + * tb_port_is_clx_enabled() - Is given CL state enabled + * @port: USB4 port to check + * @clx_mask: Mask of CL states to check + * + * Returns true if any of the given CL states is enabled for @port. + */ +bool tb_port_is_clx_enabled(struct tb_port *port, unsigned int clx_mask) +{ + u32 val, mask = 0; + int ret; + + if (!tb_port_clx_supported(port, clx_mask)) + return false; + + if (clx_mask & TB_CL1) + mask |= LANE_ADP_CS_1_CL0S_ENABLE | LANE_ADP_CS_1_CL1_ENABLE; + if (clx_mask & TB_CL2) + mask |= LANE_ADP_CS_1_CL2_ENABLE; + + ret = tb_port_read(port, &val, TB_CFG_PORT, + port->cap_phy + LANE_ADP_CS_1, 1); + if (ret) + return false; + + return !!(val & mask); +} + static int tb_port_start_lane_initialization(struct tb_port *port) { int ret; @@ -1620,7 +1694,7 @@ static ssize_t authorized_show(struct device *dev, { struct tb_switch *sw = tb_to_switch(dev); - return sprintf(buf, "%u\n", sw->authorized); + return sysfs_emit(buf, "%u\n", sw->authorized); } static int disapprove_switch(struct device *dev, void *not_used) @@ -1730,7 +1804,7 @@ static ssize_t boot_show(struct device *dev, struct device_attribute *attr, { struct tb_switch *sw = tb_to_switch(dev); - return sprintf(buf, "%u\n", sw->boot); + return sysfs_emit(buf, "%u\n", sw->boot); } static DEVICE_ATTR_RO(boot); @@ -1739,7 +1813,7 @@ static ssize_t device_show(struct device *dev, struct device_attribute *attr, { struct tb_switch *sw = tb_to_switch(dev); - return sprintf(buf, "%#x\n", sw->device); + return sysfs_emit(buf, "%#x\n", sw->device); } static DEVICE_ATTR_RO(device); @@ -1748,7 +1822,7 @@ device_name_show(struct device *dev, struct device_attribute *attr, char *buf) { struct tb_switch *sw = tb_to_switch(dev); - return sprintf(buf, "%s\n", sw->device_name ? sw->device_name : ""); + return sysfs_emit(buf, "%s\n", sw->device_name ?: ""); } static DEVICE_ATTR_RO(device_name); @@ -1757,7 +1831,7 @@ generation_show(struct device *dev, struct device_attribute *attr, char *buf) { struct tb_switch *sw = tb_to_switch(dev); - return sprintf(buf, "%u\n", sw->generation); + return sysfs_emit(buf, "%u\n", sw->generation); } static DEVICE_ATTR_RO(generation); @@ -1771,9 +1845,9 @@ static ssize_t key_show(struct device *dev, struct device_attribute *attr, return restart_syscall(); if (sw->key) - ret = sprintf(buf, "%*phN\n", TB_SWITCH_KEY_SIZE, sw->key); + ret = sysfs_emit(buf, "%*phN\n", TB_SWITCH_KEY_SIZE, sw->key); else - ret = sprintf(buf, "\n"); + ret = sysfs_emit(buf, "\n"); mutex_unlock(&sw->tb->lock); return ret; @@ -1818,7 +1892,7 @@ static ssize_t speed_show(struct device *dev, struct device_attribute *attr, { struct tb_switch *sw = tb_to_switch(dev); - return sprintf(buf, "%u.0 Gb/s\n", sw->link_speed); + return sysfs_emit(buf, "%u.0 Gb/s\n", sw->link_speed); } /* @@ -1833,7 +1907,7 @@ static ssize_t lanes_show(struct device *dev, struct device_attribute *attr, { struct tb_switch *sw = tb_to_switch(dev); - return sprintf(buf, "%u\n", sw->link_width); + return sysfs_emit(buf, "%u\n", sw->link_width); } /* @@ -1850,7 +1924,7 @@ static ssize_t nvm_authenticate_show(struct device *dev, u32 status; nvm_get_auth_status(sw, &status); - return sprintf(buf, "%#x\n", status); + return sysfs_emit(buf, "%#x\n", status); } static ssize_t nvm_authenticate_sysfs(struct device *dev, const char *buf, @@ -1866,6 +1940,11 @@ static ssize_t nvm_authenticate_sysfs(struct device *dev, const char *buf, goto exit_rpm; } + if (sw->no_nvm_upgrade) { + ret = -EOPNOTSUPP; + goto exit_unlock; + } + /* If NVMem devices are not yet added */ if (!sw->nvm) { ret = -EAGAIN; @@ -1954,7 +2033,7 @@ static ssize_t nvm_version_show(struct device *dev, else if (!sw->nvm) ret = -EAGAIN; else - ret = sprintf(buf, "%x.%x\n", sw->nvm->major, sw->nvm->minor); + ret = sysfs_emit(buf, "%x.%x\n", sw->nvm->major, sw->nvm->minor); mutex_unlock(&sw->tb->lock); @@ -1967,7 +2046,7 @@ static ssize_t vendor_show(struct device *dev, struct device_attribute *attr, { struct tb_switch *sw = tb_to_switch(dev); - return sprintf(buf, "%#x\n", sw->vendor); + return sysfs_emit(buf, "%#x\n", sw->vendor); } static DEVICE_ATTR_RO(vendor); @@ -1976,7 +2055,7 @@ vendor_name_show(struct device *dev, struct device_attribute *attr, char *buf) { struct tb_switch *sw = tb_to_switch(dev); - return sprintf(buf, "%s\n", sw->vendor_name ? sw->vendor_name : ""); + return sysfs_emit(buf, "%s\n", sw->vendor_name ?: ""); } static DEVICE_ATTR_RO(vendor_name); @@ -1985,7 +2064,7 @@ static ssize_t unique_id_show(struct device *dev, struct device_attribute *attr, { struct tb_switch *sw = tb_to_switch(dev); - return sprintf(buf, "%pUb\n", sw->uuid); + return sysfs_emit(buf, "%pUb\n", sw->uuid); } static DEVICE_ATTR_RO(unique_id); @@ -2822,6 +2901,26 @@ static void tb_switch_credits_init(struct tb_switch *sw) tb_sw_info(sw, "failed to determine preferred buffer allocation, using defaults\n"); } +static int tb_switch_port_hotplug_enable(struct tb_switch *sw) +{ + struct tb_port *port; + + if (tb_switch_is_icm(sw)) + return 0; + + tb_switch_for_each_port(sw, port) { + int res; + + if (!port->cap_usb4) + continue; + + res = usb4_port_hotplug_enable(port); + if (res) + return res; + } + return 0; +} + /** * tb_switch_add() - Add a switch to the domain * @sw: Switch to add @@ -2891,6 +2990,10 @@ int tb_switch_add(struct tb_switch *sw) return ret; } + ret = tb_switch_port_hotplug_enable(sw); + if (ret) + return ret; + ret = device_add(&sw->dev); if (ret) { dev_err(&sw->dev, "failed to add device: %d\n", ret); @@ -3362,35 +3465,6 @@ struct tb_port *tb_switch_find_port(struct tb_switch *sw, return NULL; } -static int __tb_port_pm_secondary_set(struct tb_port *port, bool secondary) -{ - u32 phy; - int ret; - - ret = tb_port_read(port, &phy, TB_CFG_PORT, - port->cap_phy + LANE_ADP_CS_1, 1); - if (ret) - return ret; - - if (secondary) - phy |= LANE_ADP_CS_1_PMS; - else - phy &= ~LANE_ADP_CS_1_PMS; - - return tb_port_write(port, &phy, TB_CFG_PORT, - port->cap_phy + LANE_ADP_CS_1, 1); -} - -static int tb_port_pm_secondary_enable(struct tb_port *port) -{ - return __tb_port_pm_secondary_set(port, true); -} - -static int tb_port_pm_secondary_disable(struct tb_port *port) -{ - return __tb_port_pm_secondary_set(port, false); -} - static int tb_switch_pm_secondary_resolve(struct tb_switch *sw) { struct tb_switch *parent = tb_switch_parent(sw); @@ -3409,83 +3483,6 @@ static int tb_switch_pm_secondary_resolve(struct tb_switch *sw) return tb_port_pm_secondary_disable(down); } -/* Called for USB4 or Titan Ridge routers only */ -static bool tb_port_clx_supported(struct tb_port *port, enum tb_clx clx) -{ - u32 mask, val; - bool ret; - - /* Don't enable CLx in case of two single-lane links */ - if (!port->bonded && port->dual_link_port) - return false; - - /* Don't enable CLx in case of inter-domain link */ - if (port->xdomain) - return false; - - if (tb_switch_is_usb4(port->sw)) { - if (!usb4_port_clx_supported(port)) - return false; - } else if (!tb_lc_is_clx_supported(port)) { - return false; - } - - switch (clx) { - case TB_CL1: - /* CL0s and CL1 are enabled and supported together */ - mask = LANE_ADP_CS_0_CL0S_SUPPORT | LANE_ADP_CS_0_CL1_SUPPORT; - break; - - /* For now we support only CL0s and CL1. Not CL2 */ - case TB_CL2: - default: - return false; - } - - ret = tb_port_read(port, &val, TB_CFG_PORT, - port->cap_phy + LANE_ADP_CS_0, 1); - if (ret) - return false; - - return !!(val & mask); -} - -static int __tb_port_clx_set(struct tb_port *port, enum tb_clx clx, bool enable) -{ - u32 phy, mask; - int ret; - - /* CL0s and CL1 are enabled and supported together */ - if (clx == TB_CL1) - mask = LANE_ADP_CS_1_CL0S_ENABLE | LANE_ADP_CS_1_CL1_ENABLE; - else - /* For now we support only CL0s and CL1. Not CL2 */ - return -EOPNOTSUPP; - - ret = tb_port_read(port, &phy, TB_CFG_PORT, - port->cap_phy + LANE_ADP_CS_1, 1); - if (ret) - return ret; - - if (enable) - phy |= mask; - else - phy &= ~mask; - - return tb_port_write(port, &phy, TB_CFG_PORT, - port->cap_phy + LANE_ADP_CS_1, 1); -} - -static int tb_port_clx_disable(struct tb_port *port, enum tb_clx clx) -{ - return __tb_port_clx_set(port, clx, false); -} - -static int tb_port_clx_enable(struct tb_port *port, enum tb_clx clx) -{ - return __tb_port_clx_set(port, clx, true); -} - static int __tb_switch_enable_clx(struct tb_switch *sw, enum tb_clx clx) { struct tb_switch *parent = tb_switch_parent(sw); diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c index 9a277078338c..462845804427 100644 --- a/drivers/thunderbolt/tb.c +++ b/drivers/thunderbolt/tb.c @@ -105,6 +105,32 @@ static void tb_remove_dp_resources(struct tb_switch *sw) } } +static void tb_discover_dp_resource(struct tb *tb, struct tb_port *port) +{ + struct tb_cm *tcm = tb_priv(tb); + struct tb_port *p; + + list_for_each_entry(p, &tcm->dp_resources, list) { + if (p == port) + return; + } + + tb_port_dbg(port, "DP %s resource available discovered\n", + tb_port_is_dpin(port) ? "IN" : "OUT"); + list_add_tail(&port->list, &tcm->dp_resources); +} + +static void tb_discover_dp_resources(struct tb *tb) +{ + struct tb_cm *tcm = tb_priv(tb); + struct tb_tunnel *tunnel; + + list_for_each_entry(tunnel, &tcm->tunnel_list, list) { + if (tb_tunnel_is_dp(tunnel)) + tb_discover_dp_resource(tb, tunnel->dst_port); + } +} + static void tb_switch_discover_tunnels(struct tb_switch *sw, struct list_head *list, bool alloc_hopids) @@ -1416,8 +1442,11 @@ static int tb_start(struct tb *tb) * ICM firmware upgrade needs running firmware and in native * mode that is not available so disable firmware upgrade of the * root switch. + * + * However, USB4 routers support NVM firmware upgrade if they + * implement the necessary router operations. */ - tb->root_switch->no_nvm_upgrade = true; + tb->root_switch->no_nvm_upgrade = !tb_switch_is_usb4(tb->root_switch); /* All USB4 routers support runtime PM */ tb->root_switch->rpm = tb_switch_is_usb4(tb->root_switch); @@ -1446,6 +1475,8 @@ static int tb_start(struct tb *tb) tb_scan_switch(tb->root_switch); /* Find out tunnels created by the boot firmware */ tb_discover_tunnels(tb); + /* Add DP resources from the DP tunnels created by the boot firmware */ + tb_discover_dp_resources(tb); /* * If the boot firmware did not create USB 3.x tunnels create them * now for the whole topology. diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h index 0f067c06cba6..f9786976f5ec 100644 --- a/drivers/thunderbolt/tb.h +++ b/drivers/thunderbolt/tb.h @@ -23,11 +23,6 @@ #define NVM_MAX_SIZE SZ_512K #define NVM_DATA_DWORDS 16 -/* Intel specific NVM offsets */ -#define NVM_DEVID 0x05 -#define NVM_VERSION 0x08 -#define NVM_FLASH_SIZE 0x45 - /** * struct tb_nvm - Structure holding NVM information * @dev: Owner of the NVM @@ -35,28 +30,35 @@ * @minor: Minor version number of the active NVM portion * @id: Identifier used with both NVM portions * @active: Active portion NVMem device + * @active_size: Size in bytes of the active NVM * @non_active: Non-active portion NVMem device * @buf: Buffer where the NVM image is stored before it is written to * the actual NVM flash device + * @buf_data_start: Where the actual image starts after skipping + * possible headers * @buf_data_size: Number of bytes actually consumed by the new NVM * image * @authenticating: The device is authenticating the new NVM * @flushed: The image has been flushed to the storage area + * @vops: Router vendor specific NVM operations (optional) * * The user of this structure needs to handle serialization of possible * concurrent access. */ struct tb_nvm { struct device *dev; - u8 major; - u8 minor; + u32 major; + u32 minor; int id; struct nvmem_device *active; + size_t active_size; struct nvmem_device *non_active; void *buf; + void *buf_data_start; size_t buf_data_size; bool authenticating; bool flushed; + const struct tb_nvm_vendor_ops *vops; }; enum tb_nvm_write_ops { @@ -113,8 +115,8 @@ struct tb_switch_tmu { enum tb_clx { TB_CLX_DISABLE, /* CL0s and CL1 are enabled and supported together */ - TB_CL1, - TB_CL2, + TB_CL1 = BIT(0), + TB_CL2 = BIT(1), }; /** @@ -279,12 +281,16 @@ struct tb_port { * @can_offline: Does the port have necessary platform support to moved * it into offline mode and back * @offline: The port is currently in offline mode + * @margining: Pointer to margining structure if enabled */ struct usb4_port { struct device dev; struct tb_port *port; bool can_offline; bool offline; +#ifdef CONFIG_USB4_DEBUGFS_MARGINING + struct tb_margining *margining; +#endif }; /** @@ -296,6 +302,7 @@ struct usb4_port { * @device: Device ID of the retimer * @port: Pointer to the lane 0 adapter * @nvm: Pointer to the NVM if the retimer has one (%NULL otherwise) + * @no_nvm_upgrade: Prevent NVM upgrade of this retimer * @auth_status: Status of last NVM authentication */ struct tb_retimer { @@ -306,6 +313,7 @@ struct tb_retimer { u32 device; struct tb_port *port; struct tb_nvm *nvm; + bool no_nvm_upgrade; u32 auth_status; }; @@ -737,11 +745,13 @@ static inline void tb_domain_put(struct tb *tb) } struct tb_nvm *tb_nvm_alloc(struct device *dev); -int tb_nvm_add_active(struct tb_nvm *nvm, size_t size, nvmem_reg_read_t reg_read); +int tb_nvm_read_version(struct tb_nvm *nvm); +int tb_nvm_validate(struct tb_nvm *nvm); +int tb_nvm_write_headers(struct tb_nvm *nvm); +int tb_nvm_add_active(struct tb_nvm *nvm, nvmem_reg_read_t reg_read); int tb_nvm_write_buf(struct tb_nvm *nvm, unsigned int offset, void *val, size_t bytes); -int tb_nvm_add_non_active(struct tb_nvm *nvm, size_t size, - nvmem_reg_write_t reg_write); +int tb_nvm_add_non_active(struct tb_nvm *nvm, nvmem_reg_write_t reg_write); void tb_nvm_free(struct tb_nvm *nvm); void tb_nvm_exit(void); @@ -755,6 +765,8 @@ int tb_nvm_write_data(unsigned int address, const void *buf, size_t size, unsigned int retries, write_block_fn write_next_block, void *write_block_data); +int tb_switch_nvm_read(struct tb_switch *sw, unsigned int address, void *buf, + size_t size); struct tb_switch *tb_switch_alloc(struct tb *tb, struct device *parent, u64 route); struct tb_switch *tb_switch_alloc_safe_mode(struct tb *tb, @@ -1035,6 +1047,7 @@ void tb_port_lane_bonding_disable(struct tb_port *port); int tb_port_wait_for_link_width(struct tb_port *port, int width, int timeout_msec); int tb_port_update_credits(struct tb_port *port); +bool tb_port_is_clx_enabled(struct tb_port *port, enum tb_clx clx); int tb_switch_find_vse_cap(struct tb_switch *sw, enum tb_switch_vse_cap vsec); int tb_switch_find_cap(struct tb_switch *sw, enum tb_switch_cap cap); @@ -1132,6 +1145,13 @@ void tb_xdomain_remove(struct tb_xdomain *xd); struct tb_xdomain *tb_xdomain_find_by_link_depth(struct tb *tb, u8 link, u8 depth); +static inline struct tb_switch *tb_xdomain_parent(struct tb_xdomain *xd) +{ + return tb_to_switch(xd->dev.parent); +} + +int tb_retimer_nvm_read(struct tb_retimer *rt, unsigned int address, void *buf, + size_t size); int tb_retimer_scan(struct tb_port *port, bool add); void tb_retimer_remove_all(struct tb_port *port); @@ -1174,6 +1194,7 @@ int usb4_switch_add_ports(struct tb_switch *sw); void usb4_switch_remove_ports(struct tb_switch *sw); int usb4_port_unlock(struct tb_port *port); +int usb4_port_hotplug_enable(struct tb_port *port); int usb4_port_configure(struct tb_port *port); void usb4_port_unconfigure(struct tb_port *port); int usb4_port_configure_xdomain(struct tb_port *port, struct tb_xdomain *xd); @@ -1182,6 +1203,13 @@ int usb4_port_router_offline(struct tb_port *port); int usb4_port_router_online(struct tb_port *port); int usb4_port_enumerate_retimers(struct tb_port *port); bool usb4_port_clx_supported(struct tb_port *port); +int usb4_port_margining_caps(struct tb_port *port, u32 *caps); +int usb4_port_hw_margin(struct tb_port *port, unsigned int lanes, + unsigned int ber_level, bool timing, bool right_high, + u32 *results); +int usb4_port_sw_margin(struct tb_port *port, unsigned int lanes, bool timing, + bool right_high, u32 counter); +int usb4_port_sw_margin_errors(struct tb_port *port, u32 *errors); int usb4_port_retimer_set_inbound_sbtx(struct tb_port *port, u8 index); int usb4_port_retimer_read(struct tb_port *port, u8 index, u8 reg, void *buf, @@ -1264,6 +1292,8 @@ void tb_debugfs_init(void); void tb_debugfs_exit(void); void tb_switch_debugfs_init(struct tb_switch *sw); void tb_switch_debugfs_remove(struct tb_switch *sw); +void tb_xdomain_debugfs_init(struct tb_xdomain *xd); +void tb_xdomain_debugfs_remove(struct tb_xdomain *xd); void tb_service_debugfs_init(struct tb_service *svc); void tb_service_debugfs_remove(struct tb_service *svc); #else @@ -1271,6 +1301,8 @@ static inline void tb_debugfs_init(void) { } static inline void tb_debugfs_exit(void) { } static inline void tb_switch_debugfs_init(struct tb_switch *sw) { } static inline void tb_switch_debugfs_remove(struct tb_switch *sw) { } +static inline void tb_xdomain_debugfs_init(struct tb_xdomain *xd) { } +static inline void tb_xdomain_debugfs_remove(struct tb_xdomain *xd) { } static inline void tb_service_debugfs_init(struct tb_service *svc) { } static inline void tb_service_debugfs_remove(struct tb_service *svc) { } #endif diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h index 166054110388..86319dca0f8c 100644 --- a/drivers/thunderbolt/tb_regs.h +++ b/drivers/thunderbolt/tb_regs.h @@ -308,6 +308,7 @@ struct tb_regs_port_header { #define ADP_CS_5 0x05 #define ADP_CS_5_LCA_MASK GENMASK(28, 22) #define ADP_CS_5_LCA_SHIFT 22 +#define ADP_CS_5_DHP BIT(31) /* TMU adapter registers */ #define TMU_ADP_CS_3 0x03 @@ -324,6 +325,7 @@ struct tb_regs_port_header { #define LANE_ADP_CS_0_SUPPORTED_WIDTH_DUAL 0x2 #define LANE_ADP_CS_0_CL0S_SUPPORT BIT(26) #define LANE_ADP_CS_0_CL1_SUPPORT BIT(27) +#define LANE_ADP_CS_0_CL2_SUPPORT BIT(28) #define LANE_ADP_CS_1 0x01 #define LANE_ADP_CS_1_TARGET_SPEED_MASK GENMASK(3, 0) #define LANE_ADP_CS_1_TARGET_SPEED_GEN3 0xc @@ -333,6 +335,7 @@ struct tb_regs_port_header { #define LANE_ADP_CS_1_TARGET_WIDTH_DUAL 0x3 #define LANE_ADP_CS_1_CL0S_ENABLE BIT(10) #define LANE_ADP_CS_1_CL1_ENABLE BIT(11) +#define LANE_ADP_CS_1_CL2_ENABLE BIT(12) #define LANE_ADP_CS_1_LD BIT(14) #define LANE_ADP_CS_1_LB BIT(15) #define LANE_ADP_CS_1_CURRENT_SPEED_MASK GENMASK(19, 16) diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c index a386228a44ee..f986854aa207 100644 --- a/drivers/thunderbolt/usb4.c +++ b/drivers/thunderbolt/usb4.c @@ -1046,6 +1046,26 @@ int usb4_port_unlock(struct tb_port *port) return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_4, 1); } +/** + * usb4_port_hotplug_enable() - Enables hotplug for a port + * @port: USB4 port to operate on + * + * Enables hot plug events on a given port. This is only intended + * to be used on lane, DP-IN, and DP-OUT adapters. + */ +int usb4_port_hotplug_enable(struct tb_port *port) +{ + int ret; + u32 val; + + ret = tb_port_read(port, &val, TB_CFG_PORT, ADP_CS_5, 1); + if (ret) + return ret; + + val &= ~ADP_CS_5_DHP; + return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_5, 1); +} + static int usb4_port_set_configured(struct tb_port *port, bool configured) { int ret; @@ -1386,6 +1406,126 @@ bool usb4_port_clx_supported(struct tb_port *port) return !!(val & PORT_CS_18_CPS); } +/** + * usb4_port_margining_caps() - Read USB4 port marginig capabilities + * @port: USB4 port + * @caps: Array with at least two elements to hold the results + * + * Reads the USB4 port lane margining capabilities into @caps. + */ +int usb4_port_margining_caps(struct tb_port *port, u32 *caps) +{ + int ret; + + ret = usb4_port_sb_op(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_OPCODE_READ_LANE_MARGINING_CAP, 500); + if (ret) + return ret; + + return usb4_port_sb_read(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_DATA, caps, sizeof(*caps) * 2); +} + +/** + * usb4_port_hw_margin() - Run hardware lane margining on port + * @port: USB4 port + * @lanes: Which lanes to run (must match the port capabilities). Can be + * %0, %1 or %7. + * @ber_level: BER level contour value + * @timing: Perform timing margining instead of voltage + * @right_high: Use Right/high margin instead of left/low + * @results: Array with at least two elements to hold the results + * + * Runs hardware lane margining on USB4 port and returns the result in + * @results. + */ +int usb4_port_hw_margin(struct tb_port *port, unsigned int lanes, + unsigned int ber_level, bool timing, bool right_high, + u32 *results) +{ + u32 val; + int ret; + + val = lanes; + if (timing) + val |= USB4_MARGIN_HW_TIME; + if (right_high) + val |= USB4_MARGIN_HW_RH; + if (ber_level) + val |= (ber_level << USB4_MARGIN_HW_BER_SHIFT) & + USB4_MARGIN_HW_BER_MASK; + + ret = usb4_port_sb_write(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_METADATA, &val, sizeof(val)); + if (ret) + return ret; + + ret = usb4_port_sb_op(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_OPCODE_RUN_HW_LANE_MARGINING, 2500); + if (ret) + return ret; + + return usb4_port_sb_read(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_DATA, results, sizeof(*results) * 2); +} + +/** + * usb4_port_sw_margin() - Run software lane margining on port + * @port: USB4 port + * @lanes: Which lanes to run (must match the port capabilities). Can be + * %0, %1 or %7. + * @timing: Perform timing margining instead of voltage + * @right_high: Use Right/high margin instead of left/low + * @counter: What to do with the error counter + * + * Runs software lane margining on USB4 port. Read back the error + * counters by calling usb4_port_sw_margin_errors(). Returns %0 in + * success and negative errno otherwise. + */ +int usb4_port_sw_margin(struct tb_port *port, unsigned int lanes, bool timing, + bool right_high, u32 counter) +{ + u32 val; + int ret; + + val = lanes; + if (timing) + val |= USB4_MARGIN_SW_TIME; + if (right_high) + val |= USB4_MARGIN_SW_RH; + val |= (counter << USB4_MARGIN_SW_COUNTER_SHIFT) & + USB4_MARGIN_SW_COUNTER_MASK; + + ret = usb4_port_sb_write(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_METADATA, &val, sizeof(val)); + if (ret) + return ret; + + return usb4_port_sb_op(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_OPCODE_RUN_SW_LANE_MARGINING, 2500); +} + +/** + * usb4_port_sw_margin_errors() - Read the software margining error counters + * @port: USB4 port + * @errors: Error metadata is copied here. + * + * This reads back the software margining error counters from the port. + * Returns %0 in success and negative errno otherwise. + */ +int usb4_port_sw_margin_errors(struct tb_port *port, u32 *errors) +{ + int ret; + + ret = usb4_port_sb_op(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_OPCODE_READ_SW_MARGIN_ERR, 150); + if (ret) + return ret; + + return usb4_port_sb_read(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_METADATA, errors, sizeof(*errors)); +} + static inline int usb4_port_retimer_op(struct tb_port *port, u8 index, enum usb4_sb_opcode opcode, int timeout_msec) diff --git a/drivers/thunderbolt/xdomain.c b/drivers/thunderbolt/xdomain.c index c31c0d94d8b3..bbb248a2686f 100644 --- a/drivers/thunderbolt/xdomain.c +++ b/drivers/thunderbolt/xdomain.c @@ -877,7 +877,7 @@ static ssize_t key_show(struct device *dev, struct device_attribute *attr, * It should be null terminated but anything else is pretty much * allowed. */ - return sprintf(buf, "%*pE\n", (int)strlen(svc->key), svc->key); + return sysfs_emit(buf, "%*pE\n", (int)strlen(svc->key), svc->key); } static DEVICE_ATTR_RO(key); @@ -903,7 +903,7 @@ static ssize_t prtcid_show(struct device *dev, struct device_attribute *attr, { struct tb_service *svc = container_of(dev, struct tb_service, dev); - return sprintf(buf, "%u\n", svc->prtcid); + return sysfs_emit(buf, "%u\n", svc->prtcid); } static DEVICE_ATTR_RO(prtcid); @@ -912,7 +912,7 @@ static ssize_t prtcvers_show(struct device *dev, struct device_attribute *attr, { struct tb_service *svc = container_of(dev, struct tb_service, dev); - return sprintf(buf, "%u\n", svc->prtcvers); + return sysfs_emit(buf, "%u\n", svc->prtcvers); } static DEVICE_ATTR_RO(prtcvers); @@ -921,7 +921,7 @@ static ssize_t prtcrevs_show(struct device *dev, struct device_attribute *attr, { struct tb_service *svc = container_of(dev, struct tb_service, dev); - return sprintf(buf, "%u\n", svc->prtcrevs); + return sysfs_emit(buf, "%u\n", svc->prtcrevs); } static DEVICE_ATTR_RO(prtcrevs); @@ -930,7 +930,7 @@ static ssize_t prtcstns_show(struct device *dev, struct device_attribute *attr, { struct tb_service *svc = container_of(dev, struct tb_service, dev); - return sprintf(buf, "0x%08x\n", svc->prtcstns); + return sysfs_emit(buf, "0x%08x\n", svc->prtcstns); } static DEVICE_ATTR_RO(prtcstns); @@ -1131,11 +1131,6 @@ static int populate_properties(struct tb_xdomain *xd, return 0; } -static inline struct tb_switch *tb_xdomain_parent(struct tb_xdomain *xd) -{ - return tb_to_switch(xd->dev.parent); -} - static int tb_xdomain_update_link_attributes(struct tb_xdomain *xd) { bool change = false; @@ -1440,6 +1435,8 @@ static int tb_xdomain_get_properties(struct tb_xdomain *xd) if (xd->vendor_name && xd->device_name) dev_info(&xd->dev, "%s %s\n", xd->vendor_name, xd->device_name); + + tb_xdomain_debugfs_init(xd); } else { kobject_uevent(&xd->dev.kobj, KOBJ_CHANGE); } @@ -1664,7 +1661,7 @@ static ssize_t device_show(struct device *dev, struct device_attribute *attr, { struct tb_xdomain *xd = container_of(dev, struct tb_xdomain, dev); - return sprintf(buf, "%#x\n", xd->device); + return sysfs_emit(buf, "%#x\n", xd->device); } static DEVICE_ATTR_RO(device); @@ -1676,7 +1673,7 @@ device_name_show(struct device *dev, struct device_attribute *attr, char *buf) if (mutex_lock_interruptible(&xd->lock)) return -ERESTARTSYS; - ret = sprintf(buf, "%s\n", xd->device_name ? xd->device_name : ""); + ret = sysfs_emit(buf, "%s\n", xd->device_name ?: ""); mutex_unlock(&xd->lock); return ret; @@ -1688,7 +1685,7 @@ static ssize_t maxhopid_show(struct device *dev, struct device_attribute *attr, { struct tb_xdomain *xd = container_of(dev, struct tb_xdomain, dev); - return sprintf(buf, "%d\n", xd->remote_max_hopid); + return sysfs_emit(buf, "%d\n", xd->remote_max_hopid); } static DEVICE_ATTR_RO(maxhopid); @@ -1697,7 +1694,7 @@ static ssize_t vendor_show(struct device *dev, struct device_attribute *attr, { struct tb_xdomain *xd = container_of(dev, struct tb_xdomain, dev); - return sprintf(buf, "%#x\n", xd->vendor); + return sysfs_emit(buf, "%#x\n", xd->vendor); } static DEVICE_ATTR_RO(vendor); @@ -1709,7 +1706,7 @@ vendor_name_show(struct device *dev, struct device_attribute *attr, char *buf) if (mutex_lock_interruptible(&xd->lock)) return -ERESTARTSYS; - ret = sprintf(buf, "%s\n", xd->vendor_name ? xd->vendor_name : ""); + ret = sysfs_emit(buf, "%s\n", xd->vendor_name ?: ""); mutex_unlock(&xd->lock); return ret; @@ -1721,7 +1718,7 @@ static ssize_t unique_id_show(struct device *dev, struct device_attribute *attr, { struct tb_xdomain *xd = container_of(dev, struct tb_xdomain, dev); - return sprintf(buf, "%pUb\n", xd->remote_uuid); + return sysfs_emit(buf, "%pUb\n", xd->remote_uuid); } static DEVICE_ATTR_RO(unique_id); @@ -1730,7 +1727,7 @@ static ssize_t speed_show(struct device *dev, struct device_attribute *attr, { struct tb_xdomain *xd = container_of(dev, struct tb_xdomain, dev); - return sprintf(buf, "%u.0 Gb/s\n", xd->link_speed); + return sysfs_emit(buf, "%u.0 Gb/s\n", xd->link_speed); } static DEVICE_ATTR(rx_speed, 0444, speed_show, NULL); @@ -1741,7 +1738,7 @@ static ssize_t lanes_show(struct device *dev, struct device_attribute *attr, { struct tb_xdomain *xd = container_of(dev, struct tb_xdomain, dev); - return sprintf(buf, "%u\n", xd->link_width); + return sysfs_emit(buf, "%u\n", xd->link_width); } static DEVICE_ATTR(rx_lanes, 0444, lanes_show, NULL); @@ -1940,6 +1937,8 @@ static int unregister_service(struct device *dev, void *data) */ void tb_xdomain_remove(struct tb_xdomain *xd) { + tb_xdomain_debugfs_remove(xd); + stop_handshake(xd); device_for_each_child_reverse(&xd->dev, xd, unregister_service); diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index 362217189ef3..1cdb8758ae01 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -1026,7 +1026,7 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id, /* public fields */ instance->driver = driver; - strlcpy(instance->driver_name, driver->driver_name, + strscpy(instance->driver_name, driver->driver_name, sizeof(instance->driver_name)); instance->usb_dev = usb_dev; diff --git a/drivers/usb/cdns3/cdns3-plat.c b/drivers/usb/cdns3/cdns3-plat.c index dc068e940ed5..2bc5d094548b 100644 --- a/drivers/usb/cdns3/cdns3-plat.c +++ b/drivers/usb/cdns3/cdns3-plat.c @@ -110,8 +110,6 @@ static int cdns3_plat_probe(struct platform_device *pdev) cdns->wakeup_irq = platform_get_irq_byname_optional(pdev, "wakeup"); if (cdns->wakeup_irq == -EPROBE_DEFER) return cdns->wakeup_irq; - else if (cdns->wakeup_irq == 0) - return -EINVAL; if (cdns->wakeup_irq < 0) { dev_dbg(dev, "couldn't get wakeup irq\n"); diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 661818e8fed6..c815824a0b2d 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -34,26 +34,26 @@ config USB_CHIPIDEA_HOST ChipIdea driver. config USB_CHIPIDEA_PCI - tristate "Enable PCI glue driver" if EMBEDDED + tristate "Enable PCI glue driver" if EXPERT depends on USB_PCI depends on NOP_USB_XCEIV default USB_CHIPIDEA config USB_CHIPIDEA_MSM - tristate "Enable MSM hsusb glue driver" if EMBEDDED + tristate "Enable MSM hsusb glue driver" if EXPERT default USB_CHIPIDEA config USB_CHIPIDEA_IMX - tristate "Enable i.MX USB glue driver" if EMBEDDED + tristate "Enable i.MX USB glue driver" if EXPERT depends on OF default USB_CHIPIDEA config USB_CHIPIDEA_GENERIC - tristate "Enable generic USB2 glue driver" if EMBEDDED + tristate "Enable generic USB2 glue driver" if EXPERT default USB_CHIPIDEA config USB_CHIPIDEA_TEGRA - tristate "Enable Tegra USB glue driver" if EMBEDDED + tristate "Enable Tegra USB glue driver" if EXPERT depends on OF default USB_CHIPIDEA diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c index 89e1d82d739b..dc86b12060b5 100644 --- a/drivers/usb/chipidea/ci_hdrc_usb2.c +++ b/drivers/usb/chipidea/ci_hdrc_usb2.c @@ -30,6 +30,7 @@ static const struct ci_hdrc_platform_data ci_default_pdata = { static const struct ci_hdrc_platform_data ci_zynq_pdata = { .capoffset = DEF_CAPOFFSET, + .flags = CI_HDRC_PHY_VBUS_CONTROL, }; static const struct ci_hdrc_platform_data ci_zevio_pdata = { diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index bdc3885c0d49..bc3634a54c6b 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -63,6 +63,13 @@ static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable) priv->enabled = enable; } + if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL) { + if (enable) + usb_phy_vbus_on(ci->usb_phy); + else + usb_phy_vbus_off(ci->usb_phy); + } + if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) { /* * Marvell 28nm HSIC PHY requires forcing the port to HS mode. diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c index 61b157b9c662..ada78daba6df 100644 --- a/drivers/usb/chipidea/otg_fsm.c +++ b/drivers/usb/chipidea/otg_fsm.c @@ -471,6 +471,10 @@ static void ci_otg_drv_vbus(struct otg_fsm *fsm, int on) return; } } + + if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL) + usb_phy_vbus_on(ci->usb_phy); + /* Disable data pulse irq */ hw_write_otgsc(ci, OTGSC_DPIE, 0); @@ -480,6 +484,9 @@ static void ci_otg_drv_vbus(struct otg_fsm *fsm, int on) if (ci->platdata->reg_vbus) regulator_disable(ci->platdata->reg_vbus); + if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL) + usb_phy_vbus_off(ci->usb_phy); + fsm->a_bus_drop = 1; fsm->a_bus_req = 0; } diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index eebe782380fb..1f0951be15ab 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -958,7 +958,7 @@ static void wdm_wwan_rx(struct wdm_device *desc, int length) if (!skb) return; - memcpy(skb_put(skb, length), desc->inbuf, length); + skb_put_data(skb, desc->inbuf, length); wwan_port_rx(port, skb); /* inbuf has been copied, it is safe to check for outstanding data */ diff --git a/drivers/usb/common/debug.c b/drivers/usb/common/debug.c index 075f6b1b2a1a..f204cec8d380 100644 --- a/drivers/usb/common/debug.c +++ b/drivers/usb/common/debug.c @@ -208,30 +208,28 @@ static void usb_decode_set_isoch_delay(__u8 wValue, char *str, size_t size) snprintf(str, size, "Set Isochronous Delay(Delay = %d ns)", wValue); } -/** - * usb_decode_ctrl - Returns human readable representation of control request. - * @str: buffer to return a human-readable representation of control request. - * This buffer should have about 200 bytes. - * @size: size of str buffer. - * @bRequestType: matches the USB bmRequestType field - * @bRequest: matches the USB bRequest field - * @wValue: matches the USB wValue field (CPU byte order) - * @wIndex: matches the USB wIndex field (CPU byte order) - * @wLength: matches the USB wLength field (CPU byte order) - * - * Function returns decoded, formatted and human-readable description of - * control request packet. - * - * The usage scenario for this is for tracepoints, so function as a return - * use the same value as in parameters. This approach allows to use this - * function in TP_printk - * - * Important: wValue, wIndex, wLength parameters before invoking this function - * should be processed by le16_to_cpu macro. - */ -const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType, - __u8 bRequest, __u16 wValue, __u16 wIndex, - __u16 wLength) +static void usb_decode_ctrl_generic(char *str, size_t size, __u8 bRequestType, + __u8 bRequest, __u16 wValue, __u16 wIndex, + __u16 wLength) +{ + u8 recip = bRequestType & USB_RECIP_MASK; + u8 type = bRequestType & USB_TYPE_MASK; + + snprintf(str, size, + "Type=%s Recipient=%s Dir=%s bRequest=%u wValue=%u wIndex=%u wLength=%u", + (type == USB_TYPE_STANDARD) ? "Standard" : + (type == USB_TYPE_VENDOR) ? "Vendor" : + (type == USB_TYPE_CLASS) ? "Class" : "Unknown", + (recip == USB_RECIP_DEVICE) ? "Device" : + (recip == USB_RECIP_INTERFACE) ? "Interface" : + (recip == USB_RECIP_ENDPOINT) ? "Endpoint" : "Unknown", + (bRequestType & USB_DIR_IN) ? "IN" : "OUT", + bRequest, wValue, wIndex, wLength); +} + +static void usb_decode_ctrl_standard(char *str, size_t size, __u8 bRequestType, + __u8 bRequest, __u16 wValue, __u16 wIndex, + __u16 wLength) { switch (bRequest) { case USB_REQ_GET_STATUS: @@ -272,14 +270,48 @@ const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType, usb_decode_set_isoch_delay(wValue, str, size); break; default: - snprintf(str, size, "%02x %02x %02x %02x %02x %02x %02x %02x", - bRequestType, bRequest, - (u8)(cpu_to_le16(wValue) & 0xff), - (u8)(cpu_to_le16(wValue) >> 8), - (u8)(cpu_to_le16(wIndex) & 0xff), - (u8)(cpu_to_le16(wIndex) >> 8), - (u8)(cpu_to_le16(wLength) & 0xff), - (u8)(cpu_to_le16(wLength) >> 8)); + usb_decode_ctrl_generic(str, size, bRequestType, bRequest, + wValue, wIndex, wLength); + break; + } +} + +/** + * usb_decode_ctrl - Returns human readable representation of control request. + * @str: buffer to return a human-readable representation of control request. + * This buffer should have about 200 bytes. + * @size: size of str buffer. + * @bRequestType: matches the USB bmRequestType field + * @bRequest: matches the USB bRequest field + * @wValue: matches the USB wValue field (CPU byte order) + * @wIndex: matches the USB wIndex field (CPU byte order) + * @wLength: matches the USB wLength field (CPU byte order) + * + * Function returns decoded, formatted and human-readable description of + * control request packet. + * + * The usage scenario for this is for tracepoints, so function as a return + * use the same value as in parameters. This approach allows to use this + * function in TP_printk + * + * Important: wValue, wIndex, wLength parameters before invoking this function + * should be processed by le16_to_cpu macro. + */ +const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType, + __u8 bRequest, __u16 wValue, __u16 wIndex, + __u16 wLength) +{ + switch (bRequestType & USB_TYPE_MASK) { + case USB_TYPE_STANDARD: + usb_decode_ctrl_standard(str, size, bRequestType, bRequest, + wValue, wIndex, wLength); + break; + case USB_TYPE_VENDOR: + case USB_TYPE_CLASS: + default: + usb_decode_ctrl_generic(str, size, bRequestType, bRequest, + wValue, wIndex, wLength); + break; } return str; diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c index 0a4f441aff8f..d7c8461976ce 100644 --- a/drivers/usb/common/ulpi.c +++ b/drivers/usb/common/ulpi.c @@ -233,7 +233,7 @@ err: return 0; } -static int ulpi_regs_read(struct seq_file *seq, void *data) +static int ulpi_regs_show(struct seq_file *seq, void *data) { struct ulpi *ulpi = seq->private; @@ -269,21 +269,7 @@ static int ulpi_regs_read(struct seq_file *seq, void *data) return 0; } - -static int ulpi_regs_open(struct inode *inode, struct file *f) -{ - struct ulpi *ulpi = inode->i_private; - - return single_open(f, ulpi_regs_read, ulpi); -} - -static const struct file_operations ulpi_regs_ops = { - .owner = THIS_MODULE, - .open = ulpi_regs_open, - .release = single_release, - .read = seq_read, - .llseek = seq_lseek -}; +DEFINE_SHOW_ATTRIBUTE(ulpi_regs); #define ULPI_ROOT debugfs_lookup(KBUILD_MODNAME, NULL) @@ -316,7 +302,7 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi) } root = debugfs_create_dir(dev_name(dev), ULPI_ROOT); - debugfs_create_file("regs", 0444, root, ulpi, &ulpi_regs_ops); + debugfs_create_file("regs", 0444, root, ulpi, &ulpi_regs_fops); dev_dbg(&ulpi->dev, "registered ULPI PHY: vendor %04x, product %04x\n", ulpi->id.vendor, ulpi->id.product); diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c index b39c9f1c375d..e20874caba36 100644 --- a/drivers/usb/common/usb-conn-gpio.c +++ b/drivers/usb/common/usb-conn-gpio.c @@ -208,10 +208,8 @@ static int usb_conn_probe(struct platform_device *pdev) if (PTR_ERR(info->vbus) == -ENODEV) info->vbus = NULL; - if (IS_ERR(info->vbus)) { - ret = PTR_ERR(info->vbus); - return dev_err_probe(dev, ret, "failed to get vbus :%d\n", ret); - } + if (IS_ERR(info->vbus)) + return dev_err_probe(dev, PTR_ERR(info->vbus), "failed to get vbus\n"); info->role_sw = usb_role_switch_get(dev); if (IS_ERR(info->role_sw)) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index b5b85bf80329..837f3e57f580 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1434,7 +1434,7 @@ static int proc_getdriver(struct usb_dev_state *ps, void __user *arg) if (!intf || !intf->dev.driver) ret = -ENODATA; else { - strlcpy(gd.driver, intf->dev.driver->name, + strscpy(gd.driver, intf->dev.driver->name, sizeof(gd.driver)); ret = (copy_to_user(arg, &gd, sizeof(gd)) ? -EFAULT : 0); } diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 482dae72ef1c..9b77f49b3560 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -157,7 +157,6 @@ static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd, /** * usb_hcd_pci_probe - initialize PCI-based HCDs * @dev: USB Host Controller being probed - * @id: pci hotplug id connecting controller to HCD framework * @driver: USB HC driver handle * * Context: task context, might sleep @@ -170,8 +169,7 @@ static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd, * * Return: 0 if successful. */ -int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id, - const struct hc_driver *driver) +int usb_hcd_pci_probe(struct pci_dev *dev, const struct hc_driver *driver) { struct usb_hcd *hcd; int retval; @@ -180,9 +178,6 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id, if (usb_disabled()) return -ENODEV; - if (!id) - return -EINVAL; - if (!driver) return -EINVAL; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 94b305bbd621..faeaace0d197 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1474,7 +1474,7 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, urb->sg, urb->num_sgs, dir); - if (n <= 0) + if (!n) ret = -EAGAIN; else urb->transfer_flags |= URB_DMA_MAP_SG; @@ -2158,21 +2158,14 @@ static struct urb *request_single_step_set_feature_urb( { struct urb *urb; struct usb_hcd *hcd = bus_to_hcd(udev->bus); - struct usb_host_endpoint *ep; urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) return NULL; urb->pipe = usb_rcvctrlpipe(udev, 0); - ep = (usb_pipein(urb->pipe) ? udev->ep_in : udev->ep_out) - [usb_pipeendpoint(urb->pipe)]; - if (!ep) { - usb_free_urb(urb); - return NULL; - } - urb->ep = ep; + urb->ep = &udev->ep0; urb->dev = udev; urb->setup_packet = (void *)dr; urb->transfer_buffer = buf; diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f99a65a64588..0722d2131305 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -388,6 +388,15 @@ static const struct usb_device_id usb_quirk_list[] = { /* Kingston DataTraveler 3.0 */ { USB_DEVICE(0x0951, 0x1666), .driver_info = USB_QUIRK_NO_LPM }, + /* NVIDIA Jetson devices in Force Recovery mode */ + { USB_DEVICE(0x0955, 0x7018), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7019), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7418), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7721), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7c18), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7e19), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7f21), .driver_info = USB_QUIRK_RESET_RESUME }, + /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */ { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF }, @@ -437,6 +446,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1532, 0x0116), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Lenovo ThinkPad OneLink+ Dock twin hub controllers (VIA Labs VL812) */ + { USB_DEVICE(0x17ef, 0x1018), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x17ef, 0x1019), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Lenovo USB-C to Ethernet Adapter RTL8153-04 */ { USB_DEVICE(0x17ef, 0x720c), .driver_info = USB_QUIRK_NO_LPM }, diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index dc4fc72ab1b6..5635e4d7ec88 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -3,36 +3,6 @@ * core.c - DesignWare HS OTG Controller common routines * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 0683852e47e4..40cf2880d7e5 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -3,36 +3,6 @@ * core.h - DesignWare HS OTG Controller common declarations * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef __DWC2_CORE_H__ diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c index a5c52b237e72..158ede753854 100644 --- a/drivers/usb/dwc2/core_intr.c +++ b/drivers/usb/dwc2/core_intr.c @@ -3,36 +3,6 @@ * core_intr.c - DesignWare HS OTG Controller common interrupt handling * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index aaf7b9fc4d34..657f1f659ffa 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -3,36 +3,6 @@ * hcd.c - DesignWare HS OTG Controller host-mode routines * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h index ea02ee63ac6d..b7254d94fdc3 100644 --- a/drivers/usb/dwc2/hcd.h +++ b/drivers/usb/dwc2/hcd.h @@ -3,37 +3,8 @@ * hcd.h - DesignWare HS OTG Controller host-mode declarations * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ + #ifndef __DWC2_HCD_H__ #define __DWC2_HCD_H__ diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c index a858b5f9c1d6..6b4d825e97a2 100644 --- a/drivers/usb/dwc2/hcd_ddma.c +++ b/drivers/usb/dwc2/hcd_ddma.c @@ -3,36 +3,6 @@ * hcd_ddma.c - DesignWare HS OTG Controller descriptor DMA routines * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index d5f4ec1b73b1..c9740caa5974 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -3,36 +3,6 @@ * hcd_intr.c - DesignWare HS OTG Controller host-mode interrupt handling * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c index 24beff610cf2..0a1145592fc7 100644 --- a/drivers/usb/dwc2/hcd_queue.c +++ b/drivers/usb/dwc2/hcd_queue.c @@ -3,36 +3,6 @@ * hcd_queue.c - DesignWare HS OTG Controller host queuing routines * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h index 6b16fbf98bc6..13abdd5f6752 100644 --- a/drivers/usb/dwc2/hw.h +++ b/drivers/usb/dwc2/hw.h @@ -3,36 +3,6 @@ * hw.h - DesignWare HS OTG Controller hardware definitions * * Copyright 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef __DWC2_HW_H__ diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index fdb8a42fff86..8eab5f38b110 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -1,36 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * Copyright (C) 2004-2016 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c index a93559b4ecdb..b7306ed8be4c 100644 --- a/drivers/usb/dwc2/pci.c +++ b/drivers/usb/dwc2/pci.c @@ -3,36 +3,6 @@ * pci.c - DesignWare HS OTG Controller PCI driver * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index fd0ccf6f3ec5..ec4ace0107f5 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -3,36 +3,6 @@ * platform.c - DesignWare HS OTG Controller platform driver * * Copyright (C) Matthijs Kooijman - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index d0237b30c9be..ea51624461b5 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include @@ -86,7 +85,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) * mode. If the controller supports DRD but the dr_mode is not * specified or set to OTG, then set the mode to peripheral. */ - if (mode == USB_DR_MODE_OTG && !dwc->edev && + if (mode == USB_DR_MODE_OTG && (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) || !device_property_read_bool(dwc->dev, "usb-role-switch")) && !DWC3_VER_IS_PRIOR(DWC3, 330A)) @@ -408,6 +407,10 @@ static void dwc3_ref_clk_period(struct dwc3 *dwc) reg |= FIELD_PREP(DWC3_GFLADJ_REFCLK_FLADJ_MASK, fladj) | FIELD_PREP(DWC3_GFLADJ_240MHZDECR, decr >> 1) | FIELD_PREP(DWC3_GFLADJ_240MHZDECR_PLS1, decr & 1); + + if (dwc->gfladj_refclk_lpm_sel) + reg |= DWC3_GFLADJ_REFCLK_LPM_SEL; + dwc3_writel(dwc->regs, DWC3_GFLADJ, reg); } @@ -789,7 +792,7 @@ static int dwc3_phy_setup(struct dwc3 *dwc) else reg |= DWC3_GUSB2PHYCFG_ENBLSLPM; - if (dwc->dis_u2_freeclk_exists_quirk) + if (dwc->dis_u2_freeclk_exists_quirk || dwc->gfladj_refclk_lpm_sel) reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS; dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); @@ -1180,6 +1183,21 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GUCTL2, reg); } + /* + * When configured in HOST mode, after issuing U3/L2 exit controller + * fails to send proper CRC checksum in CRC5 feild. Because of this + * behaviour Transaction Error is generated, resulting in reset and + * re-enumeration of usb device attached. All the termsel, xcvrsel, + * opmode becomes 0 during end of resume. Enabling bit 10 of GUCTL1 + * will correct this problem. This option is to support certain + * legacy ULPI PHYs. + */ + if (dwc->resume_hs_terminations) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL1); + reg |= DWC3_GUCTL1_RESUME_OPMODE_HS_HOST; + dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); + } + if (!DWC3_VER_IS_PRIOR(DWC3, 250A)) { reg = dwc3_readl(dwc->regs, DWC3_GUCTL1); @@ -1523,8 +1541,12 @@ static void dwc3_get_properties(struct dwc3 *dwc) "snps,dis-del-phy-power-chg-quirk"); dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev, "snps,dis-tx-ipgap-linecheck-quirk"); + dwc->resume_hs_terminations = device_property_read_bool(dev, + "snps,resume-hs-terminations"); dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev, "snps,parkmode-disable-ss-quirk"); + dwc->gfladj_refclk_lpm_sel = device_property_read_bool(dev, + "snps,gfladj-refclk-lpm-sel-quirk"); dwc->tx_de_emphasis_quirk = device_property_read_bool(dev, "snps,tx_de_emphasis_quirk"); @@ -1668,46 +1690,6 @@ static void dwc3_check_params(struct dwc3 *dwc) } } -static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) -{ - struct device *dev = dwc->dev; - struct device_node *np_phy; - struct extcon_dev *edev = NULL; - const char *name; - - if (device_property_read_bool(dev, "extcon")) - return extcon_get_edev_by_phandle(dev, 0); - - /* - * Device tree platforms should get extcon via phandle. - * On ACPI platforms, we get the name from a device property. - * This device property is for kernel internal use only and - * is expected to be set by the glue code. - */ - if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) - return extcon_get_extcon_dev(name); - - /* - * Try to get an extcon device from the USB PHY controller's "port" - * node. Check if it has the "port" node first, to avoid printing the - * error message from underlying code, as it's a valid case: extcon - * device (and "port" node) may be missing in case of "usb-role-switch" - * or OTG mode. - */ - np_phy = of_parse_phandle(dev->of_node, "phys", 0); - if (of_graph_is_present(np_phy)) { - struct device_node *np_conn; - - np_conn = of_graph_get_remote_node(np_phy, -1, -1); - if (np_conn) - edev = extcon_find_edev_by_node(np_conn); - of_node_put(np_conn); - } - of_node_put(np_phy); - - return edev; -} - static int dwc3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -1753,8 +1735,10 @@ static int dwc3_probe(struct platform_device *pdev) dwc3_get_properties(dwc); dwc->reset = devm_reset_control_array_get_optional_shared(dev); - if (IS_ERR(dwc->reset)) - return PTR_ERR(dwc->reset); + if (IS_ERR(dwc->reset)) { + ret = PTR_ERR(dwc->reset); + goto put_usb_psy; + } if (dev->of_node) { /* @@ -1764,45 +1748,57 @@ static int dwc3_probe(struct platform_device *pdev) * check for them to retain backwards compatibility. */ dwc->bus_clk = devm_clk_get_optional(dev, "bus_early"); - if (IS_ERR(dwc->bus_clk)) - return dev_err_probe(dev, PTR_ERR(dwc->bus_clk), - "could not get bus clock\n"); + if (IS_ERR(dwc->bus_clk)) { + ret = dev_err_probe(dev, PTR_ERR(dwc->bus_clk), + "could not get bus clock\n"); + goto put_usb_psy; + } if (dwc->bus_clk == NULL) { dwc->bus_clk = devm_clk_get_optional(dev, "bus_clk"); - if (IS_ERR(dwc->bus_clk)) - return dev_err_probe(dev, PTR_ERR(dwc->bus_clk), - "could not get bus clock\n"); + if (IS_ERR(dwc->bus_clk)) { + ret = dev_err_probe(dev, PTR_ERR(dwc->bus_clk), + "could not get bus clock\n"); + goto put_usb_psy; + } } dwc->ref_clk = devm_clk_get_optional(dev, "ref"); - if (IS_ERR(dwc->ref_clk)) - return dev_err_probe(dev, PTR_ERR(dwc->ref_clk), - "could not get ref clock\n"); + if (IS_ERR(dwc->ref_clk)) { + ret = dev_err_probe(dev, PTR_ERR(dwc->ref_clk), + "could not get ref clock\n"); + goto put_usb_psy; + } if (dwc->ref_clk == NULL) { dwc->ref_clk = devm_clk_get_optional(dev, "ref_clk"); - if (IS_ERR(dwc->ref_clk)) - return dev_err_probe(dev, PTR_ERR(dwc->ref_clk), - "could not get ref clock\n"); + if (IS_ERR(dwc->ref_clk)) { + ret = dev_err_probe(dev, PTR_ERR(dwc->ref_clk), + "could not get ref clock\n"); + goto put_usb_psy; + } } dwc->susp_clk = devm_clk_get_optional(dev, "suspend"); - if (IS_ERR(dwc->susp_clk)) - return dev_err_probe(dev, PTR_ERR(dwc->susp_clk), - "could not get suspend clock\n"); + if (IS_ERR(dwc->susp_clk)) { + ret = dev_err_probe(dev, PTR_ERR(dwc->susp_clk), + "could not get suspend clock\n"); + goto put_usb_psy; + } if (dwc->susp_clk == NULL) { dwc->susp_clk = devm_clk_get_optional(dev, "suspend_clk"); - if (IS_ERR(dwc->susp_clk)) - return dev_err_probe(dev, PTR_ERR(dwc->susp_clk), - "could not get suspend clock\n"); + if (IS_ERR(dwc->susp_clk)) { + ret = dev_err_probe(dev, PTR_ERR(dwc->susp_clk), + "could not get suspend clock\n"); + goto put_usb_psy; + } } } ret = reset_control_deassert(dwc->reset); if (ret) - return ret; + goto put_usb_psy; ret = dwc3_clk_enable(dwc); if (ret) @@ -1844,13 +1840,6 @@ static int dwc3_probe(struct platform_device *pdev) goto err2; } - dwc->edev = dwc3_get_extcon(dwc); - if (IS_ERR(dwc->edev)) { - ret = PTR_ERR(dwc->edev); - dev_err_probe(dwc->dev, ret, "failed to get extcon\n"); - goto err3; - } - ret = dwc3_get_dr_mode(dwc); if (ret) goto err3; @@ -1909,7 +1898,7 @@ disable_clks: dwc3_clk_disable(dwc); assert_reset: reset_control_assert(dwc->reset); - +put_usb_psy: if (dwc->usb_psy) power_supply_put(dwc->usb_psy); @@ -1977,9 +1966,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) case DWC3_GCTL_PRTCAP_DEVICE: if (pm_runtime_suspended(dwc->dev)) break; - spin_lock_irqsave(&dwc->lock, flags); dwc3_gadget_suspend(dwc); - spin_unlock_irqrestore(&dwc->lock, flags); synchronize_irq(dwc->irq_gadget); dwc3_core_exit(dwc); break; @@ -2040,9 +2027,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) return ret; dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE); - spin_lock_irqsave(&dwc->lock, flags); dwc3_gadget_resume(dwc); - spin_unlock_irqrestore(&dwc->lock, flags); break; case DWC3_GCTL_PRTCAP_HOST: if (!PMSG_IS_AUTO(msg) && !device_may_wakeup(dwc->dev)) { diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 4fe4287dc934..8f9959ba9fd4 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -263,6 +263,7 @@ #define DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK BIT(26) #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24) #define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17) +#define DWC3_GUCTL1_RESUME_OPMODE_HS_HOST BIT(10) /* Global Status Register */ #define DWC3_GSTS_OTG_IP BIT(10) @@ -391,6 +392,7 @@ #define DWC3_GFLADJ_30MHZ_SDBND_SEL BIT(7) #define DWC3_GFLADJ_30MHZ_MASK 0x3f #define DWC3_GFLADJ_REFCLK_FLADJ_MASK GENMASK(21, 8) +#define DWC3_GFLADJ_REFCLK_LPM_SEL BIT(23) #define DWC3_GFLADJ_240MHZDECR GENMASK(30, 24) #define DWC3_GFLADJ_240MHZDECR_PLS1 BIT(31) @@ -1096,6 +1098,8 @@ struct dwc3_scratchpad_array { * change quirk. * @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate * check during HS transmit. + * @resume-hs-terminations: Set if we enable quirk for fixing improper crc + * generation after resume from suspend. * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed * instances in park mode. * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk @@ -1311,7 +1315,9 @@ struct dwc3 { unsigned dis_u2_freeclk_exists_quirk:1; unsigned dis_del_phy_power_chg_quirk:1; unsigned dis_tx_ipgap_linecheck_quirk:1; + unsigned resume_hs_terminations:1; unsigned parkmode_disable_ss_quirk:1; + unsigned gfladj_refclk_lpm_sel:1; unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2; @@ -1560,6 +1566,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd, int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd, u32 param); void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc); +void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep, int status); #else static inline int dwc3_gadget_init(struct dwc3 *dwc) { return 0; } diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h index d223c54115f4..48b44b88dc25 100644 --- a/drivers/usb/dwc3/debug.h +++ b/drivers/usb/dwc3/debug.h @@ -278,7 +278,7 @@ static inline const char *dwc3_ep_event_string(char *str, size_t size, break; case DWC3_DEPEVT_XFERINPROGRESS: scnprintf(str + len, size - len, - "Transfer In Progress [%d] (%c%c%c)", + "Transfer In Progress [%08x] (%c%c%c)", event->parameters, status & DEPEVT_STATUS_SHORT ? 'S' : 's', status & DEPEVT_STATUS_IOC ? 'I' : 'i', @@ -286,7 +286,7 @@ static inline const char *dwc3_ep_event_string(char *str, size_t size, break; case DWC3_DEPEVT_XFERNOTREADY: len += scnprintf(str + len, size - len, - "Transfer Not Ready [%d]%s", + "Transfer Not Ready [%08x]%s", event->parameters, status & DEPEVT_STATUS_TRANSFER_ACTIVE ? " (Active)" : " (Not Active)"); diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index 039bf241769a..8cad9e7d3368 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -8,6 +8,7 @@ */ #include +#include #include #include #include @@ -438,6 +439,51 @@ static int dwc3_drd_notifier(struct notifier_block *nb, return NOTIFY_DONE; } +static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) +{ + struct device *dev = dwc->dev; + struct device_node *np_phy; + struct extcon_dev *edev = NULL; + const char *name; + + if (device_property_read_bool(dev, "extcon")) + return extcon_get_edev_by_phandle(dev, 0); + + /* + * Device tree platforms should get extcon via phandle. + * On ACPI platforms, we get the name from a device property. + * This device property is for kernel internal use only and + * is expected to be set by the glue code. + */ + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) { + edev = extcon_get_extcon_dev(name); + if (!edev) + return ERR_PTR(-EPROBE_DEFER); + + return edev; + } + + /* + * Try to get an extcon device from the USB PHY controller's "port" + * node. Check if it has the "port" node first, to avoid printing the + * error message from underlying code, as it's a valid case: extcon + * device (and "port" node) may be missing in case of "usb-role-switch" + * or OTG mode. + */ + np_phy = of_parse_phandle(dev->of_node, "phys", 0); + if (of_graph_is_present(np_phy)) { + struct device_node *np_conn; + + np_conn = of_graph_get_remote_node(np_phy, -1, -1); + if (np_conn) + edev = extcon_find_edev_by_node(np_conn); + of_node_put(np_conn); + } + of_node_put(np_phy); + + return edev; +} + #if IS_ENABLED(CONFIG_USB_ROLE_SWITCH) #define ROLE_SWITCH 1 static int dwc3_usb_role_switch_set(struct usb_role_switch *sw, @@ -542,6 +588,10 @@ int dwc3_drd_init(struct dwc3 *dwc) device_property_read_bool(dwc->dev, "usb-role-switch")) return dwc3_setup_role_switch(dwc); + dwc->edev = dwc3_get_extcon(dwc); + if (IS_ERR(dwc->edev)) + return PTR_ERR(dwc->edev); + if (dwc->edev) { dwc->edev_nb.notifier_call = dwc3_drd_notifier; ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST, diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 4ee4ca09873a..fb14511b1e10 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -40,9 +40,10 @@ #define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee #define PCI_DEVICE_ID_INTEL_TGPH 0x43ee #define PCI_DEVICE_ID_INTEL_JSP 0x4dee -#define PCI_DEVICE_ID_INTEL_ADL 0x465e -#define PCI_DEVICE_ID_INTEL_ADLP 0x51ee -#define PCI_DEVICE_ID_INTEL_ADLM 0x54ee +#define PCI_DEVICE_ID_INTEL_ADL 0x460e +#define PCI_DEVICE_ID_INTEL_ADL_PCH 0x51ee +#define PCI_DEVICE_ID_INTEL_ADLN 0x465e +#define PCI_DEVICE_ID_INTEL_ADLN_PCH 0x54ee #define PCI_DEVICE_ID_INTEL_ADLS 0x7ae1 #define PCI_DEVICE_ID_INTEL_RPL 0x460e #define PCI_DEVICE_ID_INTEL_RPLS 0x7a61 @@ -448,10 +449,13 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADL), (kernel_ulong_t) &dwc3_pci_intel_swnode, }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLP), + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADL_PCH), (kernel_ulong_t) &dwc3_pci_intel_swnode, }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLM), + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLN), + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, + + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLN_PCH), (kernel_ulong_t) &dwc3_pci_intel_swnode, }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLS), diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index d3f3937d7005..7c40f3ffc054 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -243,6 +243,7 @@ static int dwc3_qcom_interconnect_disable(struct dwc3_qcom *qcom) */ static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom) { + enum usb_device_speed max_speed; struct device *dev = qcom->dev; int ret; @@ -252,7 +253,7 @@ static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom) qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr"); if (IS_ERR(qcom->icc_path_ddr)) { dev_err(dev, "failed to get usb-ddr path: %ld\n", - PTR_ERR(qcom->icc_path_ddr)); + PTR_ERR(qcom->icc_path_ddr)); return PTR_ERR(qcom->icc_path_ddr); } @@ -263,21 +264,20 @@ static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom) return PTR_ERR(qcom->icc_path_apps); } - if (usb_get_maximum_speed(&qcom->dwc3->dev) >= USB_SPEED_SUPER || - usb_get_maximum_speed(&qcom->dwc3->dev) == USB_SPEED_UNKNOWN) + max_speed = usb_get_maximum_speed(&qcom->dwc3->dev); + if (max_speed >= USB_SPEED_SUPER || max_speed == USB_SPEED_UNKNOWN) { ret = icc_set_bw(qcom->icc_path_ddr, - USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW); - else + USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW); + } else { ret = icc_set_bw(qcom->icc_path_ddr, - USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW); - + USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW); + } if (ret) { dev_err(dev, "failed to set bandwidth for usb-ddr path: %d\n", ret); return ret; } - ret = icc_set_bw(qcom->icc_path_apps, - APPS_USB_AVG_BW, APPS_USB_PEAK_BW); + ret = icc_set_bw(qcom->icc_path_apps, APPS_USB_AVG_BW, APPS_USB_PEAK_BW); if (ret) { dev_err(dev, "failed to set bandwidth for apps-usb path: %d\n", ret); return ret; @@ -1007,10 +1007,6 @@ static const struct dev_pm_ops dwc3_qcom_dev_pm_ops = { static const struct of_device_id dwc3_qcom_of_match[] = { { .compatible = "qcom,dwc3" }, - { .compatible = "qcom,msm8996-dwc3" }, - { .compatible = "qcom,msm8998-dwc3" }, - { .compatible = "qcom,sdm660-dwc3" }, - { .compatible = "qcom,sdm845-dwc3" }, { } }; MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match); diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c index 67b237c7a76a..8607d4c23283 100644 --- a/drivers/usb/dwc3/dwc3-xilinx.c +++ b/drivers/usb/dwc3/dwc3-xilinx.c @@ -47,6 +47,7 @@ struct dwc3_xlnx { struct device *dev; void __iomem *regs; int (*pltfm_init)(struct dwc3_xlnx *data); + struct phy *usb3_phy; }; static void dwc3_xlnx_mask_phy_rst(struct dwc3_xlnx *priv_data, bool mask) @@ -100,13 +101,12 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data) struct device *dev = priv_data->dev; struct reset_control *crst, *hibrst, *apbrst; struct gpio_desc *reset_gpio; - struct phy *usb3_phy; int ret = 0; u32 reg; - usb3_phy = devm_phy_optional_get(dev, "usb3-phy"); - if (IS_ERR(usb3_phy)) { - ret = PTR_ERR(usb3_phy); + priv_data->usb3_phy = devm_phy_optional_get(dev, "usb3-phy"); + if (IS_ERR(priv_data->usb3_phy)) { + ret = PTR_ERR(priv_data->usb3_phy); dev_err_probe(dev, ret, "failed to get USB3 PHY\n"); goto err; @@ -121,7 +121,7 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data) * in use but the usb3-phy entry is missing from the device tree. * Therefore, skip these operations in this case. */ - if (!usb3_phy) + if (!priv_data->usb3_phy) goto skip_usb3_phy; crst = devm_reset_control_get_exclusive(dev, "usb_crst"); @@ -166,9 +166,9 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data) goto err; } - ret = phy_init(usb3_phy); + ret = phy_init(priv_data->usb3_phy); if (ret < 0) { - phy_exit(usb3_phy); + phy_exit(priv_data->usb3_phy); goto err; } @@ -196,9 +196,9 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data) goto err; } - ret = phy_power_on(usb3_phy); + ret = phy_power_on(priv_data->usb3_phy); if (ret < 0) { - phy_exit(usb3_phy); + phy_exit(priv_data->usb3_phy); goto err; } @@ -322,7 +322,7 @@ static int dwc3_xlnx_remove(struct platform_device *pdev) return 0; } -static int __maybe_unused dwc3_xlnx_suspend_common(struct device *dev) +static int __maybe_unused dwc3_xlnx_runtime_suspend(struct device *dev) { struct dwc3_xlnx *priv_data = dev_get_drvdata(dev); @@ -331,7 +331,7 @@ static int __maybe_unused dwc3_xlnx_suspend_common(struct device *dev) return 0; } -static int __maybe_unused dwc3_xlnx_resume_common(struct device *dev) +static int __maybe_unused dwc3_xlnx_runtime_resume(struct device *dev) { struct dwc3_xlnx *priv_data = dev_get_drvdata(dev); @@ -346,8 +346,45 @@ static int __maybe_unused dwc3_xlnx_runtime_idle(struct device *dev) return 0; } -static UNIVERSAL_DEV_PM_OPS(dwc3_xlnx_dev_pm_ops, dwc3_xlnx_suspend_common, - dwc3_xlnx_resume_common, dwc3_xlnx_runtime_idle); +static int __maybe_unused dwc3_xlnx_suspend(struct device *dev) +{ + struct dwc3_xlnx *priv_data = dev_get_drvdata(dev); + + phy_exit(priv_data->usb3_phy); + + /* Disable the clocks */ + clk_bulk_disable(priv_data->num_clocks, priv_data->clks); + + return 0; +} + +static int __maybe_unused dwc3_xlnx_resume(struct device *dev) +{ + struct dwc3_xlnx *priv_data = dev_get_drvdata(dev); + int ret; + + ret = clk_bulk_enable(priv_data->num_clocks, priv_data->clks); + if (ret) + return ret; + + ret = phy_init(priv_data->usb3_phy); + if (ret < 0) + return ret; + + ret = phy_power_on(priv_data->usb3_phy); + if (ret < 0) { + phy_exit(priv_data->usb3_phy); + return ret; + } + + return 0; +} + +static const struct dev_pm_ops dwc3_xlnx_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(dwc3_xlnx_suspend, dwc3_xlnx_resume) + SET_RUNTIME_PM_OPS(dwc3_xlnx_runtime_suspend, + dwc3_xlnx_runtime_resume, dwc3_xlnx_runtime_idle) +}; static struct platform_driver dwc3_xlnx_driver = { .probe = dwc3_xlnx_probe, diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 197af63f8d05..61de693461da 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -197,7 +197,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, int ret; spin_lock_irqsave(&dwc->lock, flags); - if (!dep->endpoint.desc || !dwc->pullups_connected) { + if (!dep->endpoint.desc || !dwc->pullups_connected || !dwc->connected) { dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n", dep->name); ret = -ESHUTDOWN; @@ -293,7 +293,10 @@ void dwc3_ep0_out_start(struct dwc3 *dwc) continue; dwc3_ep->flags &= ~DWC3_EP_DELAY_STOP; - dwc3_stop_active_transfer(dwc3_ep, true, true); + if (dwc->connected) + dwc3_stop_active_transfer(dwc3_ep, true, true); + else + dwc3_remove_requests(dwc, dwc3_ep, -ESHUTDOWN); } } @@ -815,7 +818,7 @@ static void dwc3_ep0_inspect_setup(struct dwc3 *dwc, int ret = -EINVAL; u32 len; - if (!dwc->gadget_driver || !dwc->connected) + if (!dwc->gadget_driver || !dwc->softconnect || !dwc->connected) goto out; trace_dwc3_ctrl_req(ctrl); @@ -1118,6 +1121,8 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc, { switch (event->status) { case DEPEVT_STATUS_CONTROL_DATA: + if (!dwc->softconnect || !dwc->connected) + return; /* * We already have a DATA transfer in the controller's cache, * if we receive a XferNotReady(DATA) we will ignore it, unless diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index eca945feeec3..079cd333632e 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -366,7 +366,9 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd, dwc3_writel(dep->regs, DWC3_DEPCMD, cmd); - if (!(cmd & DWC3_DEPCMD_CMDACT)) { + if (!(cmd & DWC3_DEPCMD_CMDACT) || + (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_ENDTRANSFER && + !(cmd & DWC3_DEPCMD_CMDIOC))) { ret = 0; goto skip_status; } @@ -965,29 +967,33 @@ out: return 0; } -static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep) +void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep, int status) { struct dwc3_request *req; dwc3_stop_active_transfer(dep, true, false); + /* If endxfer is delayed, avoid unmapping requests */ + if (dep->flags & DWC3_EP_DELAY_STOP) + return; + /* - giveback all requests to gadget driver */ while (!list_empty(&dep->started_list)) { req = next_request(&dep->started_list); - dwc3_gadget_giveback(dep, req, -ESHUTDOWN); + dwc3_gadget_giveback(dep, req, status); } while (!list_empty(&dep->pending_list)) { req = next_request(&dep->pending_list); - dwc3_gadget_giveback(dep, req, -ESHUTDOWN); + dwc3_gadget_giveback(dep, req, status); } while (!list_empty(&dep->cancelled_list)) { req = next_request(&dep->cancelled_list); - dwc3_gadget_giveback(dep, req, -ESHUTDOWN); + dwc3_gadget_giveback(dep, req, status); } } @@ -1005,6 +1011,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) { struct dwc3 *dwc = dep->dwc; u32 reg; + u32 mask; trace_dwc3_gadget_ep_disable(dep); @@ -1022,11 +1029,19 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) dep->endpoint.desc = NULL; } - dwc3_remove_requests(dwc, dep); + dwc3_remove_requests(dwc, dep, -ECONNRESET); dep->stream_capable = false; dep->type = 0; - dep->flags &= DWC3_EP_TXFIFO_RESIZED; + mask = DWC3_EP_TXFIFO_RESIZED; + /* + * dwc3_remove_requests() can exit early if DWC3 EP delayed stop is + * set. Do not clear DEP flags, so that the end transfer command will + * be reattempted during the next SETUP stage. + */ + if (dep->flags & DWC3_EP_DELAY_STOP) + mask |= (DWC3_EP_DELAY_STOP | DWC3_EP_TRANSFER_STARTED); + dep->flags &= mask; return 0; } @@ -2340,7 +2355,7 @@ static void dwc3_stop_active_transfers(struct dwc3 *dwc) if (!dep) continue; - dwc3_remove_requests(dwc, dep); + dwc3_remove_requests(dwc, dep, -ESHUTDOWN); } } @@ -2440,7 +2455,7 @@ static void __dwc3_gadget_set_speed(struct dwc3 *dwc) static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend) { u32 reg; - u32 timeout = 500; + u32 timeout = 2000; if (pm_runtime_suspended(dwc->dev)) return 0; @@ -2473,6 +2488,7 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend) dwc3_gadget_dctl_write_safe(dwc, reg); do { + usleep_range(1000, 2000); reg = dwc3_readl(dwc->regs, DWC3_DSTS); reg &= DWC3_DSTS_DEVCTRLHLT; } while (--timeout && !(!is_on ^ !reg)); @@ -2501,6 +2517,9 @@ static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc) if (dwc->ep0state != EP0_SETUP_PHASE) { int ret; + if (dwc->delayed_status) + dwc3_ep0_send_delayed_status(dwc); + reinit_completion(&dwc->ep0_in_setup); spin_unlock_irqrestore(&dwc->lock, flags); @@ -2568,6 +2587,8 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) return 0; } + synchronize_irq(dwc->irq_gadget); + if (!is_on) { ret = dwc3_gadget_soft_disconnect(dwc); } else { @@ -2718,6 +2739,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); dep = dwc->eps[0]; + dep->flags = 0; ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); @@ -2725,6 +2747,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) } dep = dwc->eps[1]; + dep->flags = 0; ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); @@ -3568,7 +3591,7 @@ static void dwc3_gadget_endpoint_stream_event(struct dwc3_ep *dep, * streams are updated, and the device controller will not be * triggered to generate ERDY to move the next stream data. To * workaround this and maintain compatibility with various - * hosts, force to reinitate the stream until the host is ready + * hosts, force to reinitiate the stream until the host is ready * instead of waiting for the host to prime the endpoint. */ if (DWC3_VER_IS_WITHIN(DWC32, 100A, ANY)) { @@ -3596,11 +3619,12 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, dep = dwc->eps[epnum]; if (!(dep->flags & DWC3_EP_ENABLED)) { - if (!(dep->flags & DWC3_EP_TRANSFER_STARTED)) + if ((epnum > 1) && !(dep->flags & DWC3_EP_TRANSFER_STARTED)) return; /* Handle only EPCMDCMPLT when EP disabled */ - if (event->endpoint_event != DWC3_DEPEVT_EPCMDCMPLT) + if ((event->endpoint_event != DWC3_DEPEVT_EPCMDCMPLT) && + !(epnum <= 1 && event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE)) return; } @@ -3695,7 +3719,7 @@ void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, * timeout. Delay issuing the End Transfer command until the Setup TRB is * prepared. */ - if (dwc->ep0state != EP0_SETUP_PHASE && !dwc->delayed_status) { + if (dwc->ep0state != EP0_SETUP_PHASE) { dep->flags |= DWC3_EP_DELAY_STOP; return; } @@ -3763,13 +3787,24 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) reg &= ~DWC3_DCTL_INITU2ENA; dwc3_gadget_dctl_write_safe(dwc, reg); + dwc->connected = false; + dwc3_disconnect_gadget(dwc); dwc->gadget->speed = USB_SPEED_UNKNOWN; dwc->setup_packet_pending = false; usb_gadget_set_state(dwc->gadget, USB_STATE_NOTATTACHED); - dwc->connected = false; + if (dwc->ep0state != EP0_SETUP_PHASE) { + unsigned int dir; + + dir = !!dwc->ep0_expect_in; + if (dwc->ep0state == EP0_DATA_PHASE) + dwc3_ep0_end_control_data(dwc, dwc->eps[dir]); + else + dwc3_ep0_end_control_data(dwc, dwc->eps[!dir]); + dwc3_ep0_stall_and_restart(dwc); + } } static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) @@ -3867,6 +3902,9 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) u8 lanes = 1; u8 speed; + if (!dwc->softconnect) + return; + reg = dwc3_readl(dwc->regs, DWC3_DSTS); speed = reg & DWC3_DSTS_CONNECTSPD; dwc->speed = speed; @@ -4129,7 +4167,7 @@ static void dwc3_gadget_hibernation_interrupt(struct dwc3 *dwc, unsigned int is_ss = evtinfo & BIT(4); /* - * WORKAROUND: DWC3 revison 2.20a with hibernation support + * WORKAROUND: DWC3 revision 2.20a with hibernation support * have a known issue which can cause USB CV TD.9.23 to fail * randomly. * @@ -4507,12 +4545,17 @@ void dwc3_gadget_exit(struct dwc3 *dwc) int dwc3_gadget_suspend(struct dwc3 *dwc) { + unsigned long flags; + if (!dwc->gadget_driver) return 0; dwc3_gadget_run_stop(dwc, false, false); + + spin_lock_irqsave(&dwc->lock, flags); dwc3_disconnect_gadget(dwc); __dwc3_gadget_stop(dwc); + spin_unlock_irqrestore(&dwc->lock, flags); return 0; } diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h index cb998ba50fea..1975aec8d36d 100644 --- a/drivers/usb/dwc3/trace.h +++ b/drivers/usb/dwc3/trace.h @@ -241,7 +241,7 @@ DECLARE_EVENT_CLASS(dwc3_log_trb, __entry->enqueue = dep->trb_enqueue; __entry->dequeue = dep->trb_dequeue; ), - TP_printk("%s: trb %p (E%d:D%d) buf %08x%08x size %s%d ctrl %08x (%c%c%c%c:%c%c:%s)", + TP_printk("%s: trb %p (E%d:D%d) buf %08x%08x size %s%d ctrl %08x sofn %08x (%c%c%c%c:%c%c:%s)", __get_str(name), __entry->trb, __entry->enqueue, __entry->dequeue, __entry->bph, __entry->bpl, ({char *s; @@ -267,6 +267,7 @@ DECLARE_EVENT_CLASS(dwc3_log_trb, s = ""; } s; }), DWC3_TRB_SIZE_LENGTH(__entry->size), __entry->ctrl, + DWC3_TRB_CTRL_GET_SID_SOFN(__entry->ctrl), __entry->ctrl & DWC3_TRB_CTRL_HWO ? 'H' : 'h', __entry->ctrl & DWC3_TRB_CTRL_LST ? 'L' : 'l', __entry->ctrl & DWC3_TRB_CTRL_CHN ? 'C' : 'c', diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index e0fa4b186ec6..73dc10a77cde 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -2645,10 +2645,10 @@ static int __ffs_data_got_strings(struct ffs_data *ffs, unsigned i = 0; vla_group(d); vla_item(d, struct usb_gadget_strings *, stringtabs, - lang_count + 1); + size_add(lang_count, 1)); vla_item(d, struct usb_gadget_strings, stringtab, lang_count); vla_item(d, struct usb_string, strings, - lang_count*(needed_count+1)); + size_mul(lang_count, (needed_count + 1))); char *vlabuf = kmalloc(vla_group_size(d), GFP_KERNEL); @@ -3700,7 +3700,7 @@ int ffs_name_dev(struct ffs_dev *dev, const char *name) existing = _ffs_do_find_dev(name); if (!existing) - strlcpy(dev->name, name, ARRAY_SIZE(dev->name)); + strscpy(dev->name, name, ARRAY_SIZE(dev->name)); else if (existing != dev) ret = -EBUSY; diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c index 925e99f9775c..3abf7f586e2a 100644 --- a/drivers/usb/gadget/function/f_mass_storage.c +++ b/drivers/usb/gadget/function/f_mass_storage.c @@ -2662,11 +2662,16 @@ static ssize_t forced_eject_store(struct device *dev, } static DEVICE_ATTR_RW(nofua); -/* mode wil be set in fsg_lun_attr_is_visible() */ -static DEVICE_ATTR(ro, 0, ro_show, ro_store); -static DEVICE_ATTR(file, 0, file_show, file_store); static DEVICE_ATTR_WO(forced_eject); +/* + * Mode of the ro and file attribute files will be overridden in + * fsg_lun_dev_is_visible() depending on if this is a cdrom, or if it is a + * removable device. + */ +static DEVICE_ATTR_RW(ro); +static DEVICE_ATTR_RW(file); + /****************************** FSG COMMON ******************************/ static void fsg_lun_release(struct device *dev) diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index dc8f078f918c..c36bcfa0e9b4 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -450,39 +450,35 @@ struct ndp_parser_opts { unsigned next_ndp_index; }; -#define INIT_NDP16_OPTS { \ - .nth_sign = USB_CDC_NCM_NTH16_SIGN, \ - .ndp_sign = USB_CDC_NCM_NDP16_NOCRC_SIGN, \ - .nth_size = sizeof(struct usb_cdc_ncm_nth16), \ - .ndp_size = sizeof(struct usb_cdc_ncm_ndp16), \ - .dpe_size = sizeof(struct usb_cdc_ncm_dpe16), \ - .ndplen_align = 4, \ - .dgram_item_len = 1, \ - .block_length = 1, \ - .ndp_index = 1, \ - .reserved1 = 0, \ - .reserved2 = 0, \ - .next_ndp_index = 1, \ - } +static const struct ndp_parser_opts ndp16_opts = { + .nth_sign = USB_CDC_NCM_NTH16_SIGN, + .ndp_sign = USB_CDC_NCM_NDP16_NOCRC_SIGN, + .nth_size = sizeof(struct usb_cdc_ncm_nth16), + .ndp_size = sizeof(struct usb_cdc_ncm_ndp16), + .dpe_size = sizeof(struct usb_cdc_ncm_dpe16), + .ndplen_align = 4, + .dgram_item_len = 1, + .block_length = 1, + .ndp_index = 1, + .reserved1 = 0, + .reserved2 = 0, + .next_ndp_index = 1, +}; - -#define INIT_NDP32_OPTS { \ - .nth_sign = USB_CDC_NCM_NTH32_SIGN, \ - .ndp_sign = USB_CDC_NCM_NDP32_NOCRC_SIGN, \ - .nth_size = sizeof(struct usb_cdc_ncm_nth32), \ - .ndp_size = sizeof(struct usb_cdc_ncm_ndp32), \ - .dpe_size = sizeof(struct usb_cdc_ncm_dpe32), \ - .ndplen_align = 8, \ - .dgram_item_len = 2, \ - .block_length = 2, \ - .ndp_index = 2, \ - .reserved1 = 1, \ - .reserved2 = 2, \ - .next_ndp_index = 2, \ - } - -static const struct ndp_parser_opts ndp16_opts = INIT_NDP16_OPTS; -static const struct ndp_parser_opts ndp32_opts = INIT_NDP32_OPTS; +static const struct ndp_parser_opts ndp32_opts = { + .nth_sign = USB_CDC_NCM_NTH32_SIGN, + .ndp_sign = USB_CDC_NCM_NDP32_NOCRC_SIGN, + .nth_size = sizeof(struct usb_cdc_ncm_nth32), + .ndp_size = sizeof(struct usb_cdc_ncm_ndp32), + .dpe_size = sizeof(struct usb_cdc_ncm_dpe32), + .ndplen_align = 8, + .dgram_item_len = 2, + .block_length = 2, + .ndp_index = 2, + .reserved1 = 1, + .reserved2 = 2, + .next_ndp_index = 2, +}; static inline void put_ncm(__le16 **p, unsigned size, unsigned val) { diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c index abec5c58f525..a881c69b1f2b 100644 --- a/drivers/usb/gadget/function/f_printer.c +++ b/drivers/usb/gadget/function/f_printer.c @@ -89,7 +89,7 @@ struct printer_dev { u8 printer_cdev_open; wait_queue_head_t wait; unsigned q_len; - char *pnp_string; /* We don't own memory! */ + char **pnp_string; /* We don't own memory! */ struct usb_function function; }; @@ -1000,16 +1000,16 @@ static int printer_func_setup(struct usb_function *f, if ((wIndex>>8) != dev->interface) break; - if (!dev->pnp_string) { + if (!*dev->pnp_string) { value = 0; break; } - value = strlen(dev->pnp_string); + value = strlen(*dev->pnp_string); buf[0] = (value >> 8) & 0xFF; buf[1] = value & 0xFF; - memcpy(buf + 2, dev->pnp_string, value); + memcpy(buf + 2, *dev->pnp_string, value); DBG(dev, "1284 PNP String: %x %s\n", value, - dev->pnp_string); + *dev->pnp_string); break; case GET_PORT_STATUS: /* Get Port Status */ @@ -1475,7 +1475,7 @@ static struct usb_function *gprinter_alloc(struct usb_function_instance *fi) kref_init(&dev->kref); ++opts->refcnt; dev->minor = opts->minor; - dev->pnp_string = opts->pnp_string; + dev->pnp_string = &opts->pnp_string; dev->q_len = opts->q_len; mutex_unlock(&opts->lock); diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c index 8e17ac831be0..658e2e21fdd0 100644 --- a/drivers/usb/gadget/function/f_tcm.c +++ b/drivers/usb/gadget/function/f_tcm.c @@ -2306,7 +2306,7 @@ static struct usb_function *tcm_alloc(struct usb_function_instance *fi) DECLARE_USB_FUNCTION(tcm, tcm_alloc_inst, tcm_alloc); -static int tcm_init(void) +static int __init tcm_init(void) { int ret; @@ -2322,7 +2322,7 @@ static int tcm_init(void) } module_init(tcm_init); -static void tcm_exit(void) +static void __exit tcm_exit(void) { target_unregister_template(&usbg_ops); usb_function_unregister(&tcmusb_func); diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c index 71669e0e4d00..6e196e06181e 100644 --- a/drivers/usb/gadget/function/f_uvc.c +++ b/drivers/usb/gadget/function/f_uvc.c @@ -421,7 +421,7 @@ uvc_register_video(struct uvc_device *uvc) int ret; /* TODO reference counting. */ - memset(&uvc->vdev, 0, sizeof(uvc->video)); + memset(&uvc->vdev, 0, sizeof(uvc->vdev)); uvc->vdev.v4l2_dev = &uvc->v4l2_dev; uvc->vdev.v4l2_dev->dev = &cdev->gadget->dev; uvc->vdev.fops = &uvc_v4l2_fops; @@ -430,7 +430,7 @@ uvc_register_video(struct uvc_device *uvc) uvc->vdev.vfl_dir = VFL_DIR_TX; uvc->vdev.lock = &uvc->video.mutex; uvc->vdev.device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; - strlcpy(uvc->vdev.name, cdev->gadget->name, sizeof(uvc->vdev.name)); + strscpy(uvc->vdev.name, cdev->gadget->name, sizeof(uvc->vdev.name)); video_set_drvdata(&uvc->vdev, uvc); @@ -888,6 +888,7 @@ static void uvc_free(struct usb_function *f) struct uvc_device *uvc = to_uvc(f); struct f_uvc_opts *opts = container_of(f->fi, struct f_uvc_opts, func_inst); + config_item_put(&uvc->header->item); --opts->refcnt; kfree(uvc); } @@ -897,10 +898,14 @@ static void uvc_function_unbind(struct usb_configuration *c, { struct usb_composite_dev *cdev = c->cdev; struct uvc_device *uvc = to_uvc(f); + struct uvc_video *video = &uvc->video; long wait_ret = 1; uvcg_info(f, "%s()\n", __func__); + if (video->async_wq) + destroy_workqueue(video->async_wq); + /* * If we know we're connected via v4l2, then there should be a cleanup * of the device from userspace either via UVC_EVENT_DISCONNECT or @@ -941,6 +946,7 @@ static struct usb_function *uvc_alloc(struct usb_function_instance *fi) struct uvc_device *uvc; struct f_uvc_opts *opts; struct uvc_descriptor_header **strm_cls; + struct config_item *streaming, *header, *h; uvc = kzalloc(sizeof(*uvc), GFP_KERNEL); if (uvc == NULL) @@ -973,6 +979,28 @@ static struct usb_function *uvc_alloc(struct usb_function_instance *fi) uvc->desc.fs_streaming = opts->fs_streaming; uvc->desc.hs_streaming = opts->hs_streaming; uvc->desc.ss_streaming = opts->ss_streaming; + + streaming = config_group_find_item(&opts->func_inst.group, "streaming"); + if (!streaming) + goto err_config; + + header = config_group_find_item(to_config_group(streaming), "header"); + config_item_put(streaming); + if (!header) + goto err_config; + + h = config_group_find_item(to_config_group(header), "h"); + config_item_put(header); + if (!h) + goto err_config; + + uvc->header = to_uvcg_streaming_header(h); + if (!uvc->header->linked) { + mutex_unlock(&opts->lock); + kfree(uvc); + return ERR_PTR(-EBUSY); + } + ++opts->refcnt; mutex_unlock(&opts->lock); @@ -988,6 +1016,11 @@ static struct usb_function *uvc_alloc(struct usb_function_instance *fi) uvc->func.bind_deactivated = true; return &uvc->func; + +err_config: + mutex_unlock(&opts->lock); + kfree(uvc); + return ERR_PTR(-ENOENT); } DECLARE_USB_FUNCTION_INIT(uvc, uvc_alloc_inst, uvc_alloc); diff --git a/drivers/usb/gadget/function/rndis.c b/drivers/usb/gadget/function/rndis.c index 713efd9aefde..29bf8664bf58 100644 --- a/drivers/usb/gadget/function/rndis.c +++ b/drivers/usb/gadget/function/rndis.c @@ -869,7 +869,7 @@ EXPORT_SYMBOL_GPL(rndis_msg_parser); static inline int rndis_get_nr(void) { - return ida_simple_get(&rndis_ida, 0, 0, GFP_KERNEL); + return ida_simple_get(&rndis_ida, 0, 1000, GFP_KERNEL); } static inline void rndis_put_nr(int nr) @@ -1105,7 +1105,7 @@ static int rndis_proc_show(struct seq_file *m, void *v) "used : %s\n" "state : %s\n" "medium : 0x%08X\n" - "speed : %d\n" + "speed : %u\n" "cable : %s\n" "vendor ID : 0x%08X\n" "vendor : %s\n", diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index 7887def05dc2..e06022873df1 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -144,10 +144,10 @@ static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p) { struct eth_dev *dev = netdev_priv(net); - strlcpy(p->driver, "g_ether", sizeof(p->driver)); - strlcpy(p->version, UETH__VERSION, sizeof(p->version)); - strlcpy(p->fw_version, dev->gadget->name, sizeof(p->fw_version)); - strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof(p->bus_info)); + strscpy(p->driver, "g_ether", sizeof(p->driver)); + strscpy(p->version, UETH__VERSION, sizeof(p->version)); + strscpy(p->fw_version, dev->gadget->name, sizeof(p->fw_version)); + strscpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof(p->bus_info)); } /* REVISIT can also support: diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index 6f68cbeeee7c..7538279f9817 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -1443,7 +1443,7 @@ void gserial_resume(struct gserial *gser) } EXPORT_SYMBOL_GPL(gserial_resume); -static int userial_init(void) +static int __init userial_init(void) { struct tty_driver *driver; unsigned i; @@ -1496,7 +1496,7 @@ fail: } module_init(userial_init); -static void userial_cleanup(void) +static void __exit userial_cleanup(void) { tty_unregister_driver(gs_tty_driver); tty_driver_kref_put(gs_tty_driver); diff --git a/drivers/usb/gadget/function/uvc.h b/drivers/usb/gadget/function/uvc.h index 58e383afdd44..40226b1f7e14 100644 --- a/drivers/usb/gadget/function/uvc.h +++ b/drivers/usb/gadget/function/uvc.h @@ -88,6 +88,7 @@ struct uvc_video { struct usb_ep *ep; struct work_struct pump; + struct workqueue_struct *async_wq; /* Frame parameters */ u8 bpp; @@ -133,6 +134,8 @@ struct uvc_device { bool func_connected; wait_queue_head_t func_connected_queue; + struct uvcg_streaming_header *header; + /* Descriptors */ struct { const struct uvc_descriptor_header * const *fs_control; diff --git a/drivers/usb/gadget/function/uvc_v4l2.c b/drivers/usb/gadget/function/uvc_v4l2.c index fd8f73bb726d..c4ed48d6b8a4 100644 --- a/drivers/usb/gadget/function/uvc_v4l2.c +++ b/drivers/usb/gadget/function/uvc_v4l2.c @@ -18,12 +18,161 @@ #include #include #include +#include #include "f_uvc.h" #include "uvc.h" #include "uvc_queue.h" #include "uvc_video.h" #include "uvc_v4l2.h" +#include "uvc_configfs.h" + +static struct uvc_format_desc *to_uvc_format(struct uvcg_format *uformat) +{ + char guid[16] = UVC_GUID_FORMAT_MJPEG; + struct uvc_format_desc *format; + struct uvcg_uncompressed *unc; + + if (uformat->type == UVCG_UNCOMPRESSED) { + unc = to_uvcg_uncompressed(&uformat->group.cg_item); + if (!unc) + return ERR_PTR(-EINVAL); + + memcpy(guid, unc->desc.guidFormat, sizeof(guid)); + } + + format = uvc_format_by_guid(guid); + if (!format) + return ERR_PTR(-EINVAL); + + return format; +} + +static int uvc_v4l2_get_bytesperline(struct uvcg_format *uformat, + struct uvcg_frame *uframe) +{ + struct uvcg_uncompressed *u; + + if (uformat->type == UVCG_UNCOMPRESSED) { + u = to_uvcg_uncompressed(&uformat->group.cg_item); + if (!u) + return 0; + + return u->desc.bBitsPerPixel * uframe->frame.w_width / 8; + } + + return 0; +} + +static int uvc_get_frame_size(struct uvcg_format *uformat, + struct uvcg_frame *uframe) +{ + unsigned int bpl = uvc_v4l2_get_bytesperline(uformat, uframe); + + return bpl ? bpl * uframe->frame.w_height : + uframe->frame.dw_max_video_frame_buffer_size; +} + +static struct uvcg_format *find_format_by_index(struct uvc_device *uvc, int index) +{ + struct uvcg_format_ptr *format; + struct uvcg_format *uformat = NULL; + int i = 1; + + list_for_each_entry(format, &uvc->header->formats, entry) { + if (index == i) { + uformat = format->fmt; + break; + } + i++; + } + + return uformat; +} + +static struct uvcg_frame *find_frame_by_index(struct uvc_device *uvc, + struct uvcg_format *uformat, + int index) +{ + struct uvcg_format_ptr *format; + struct uvcg_frame_ptr *frame; + struct uvcg_frame *uframe = NULL; + + list_for_each_entry(format, &uvc->header->formats, entry) { + if (format->fmt->type != uformat->type) + continue; + list_for_each_entry(frame, &format->fmt->frames, entry) { + if (index == frame->frm->frame.b_frame_index) { + uframe = frame->frm; + break; + } + } + } + + return uframe; +} + +static struct uvcg_format *find_format_by_pix(struct uvc_device *uvc, + u32 pixelformat) +{ + struct uvcg_format_ptr *format; + struct uvcg_format *uformat = NULL; + + list_for_each_entry(format, &uvc->header->formats, entry) { + struct uvc_format_desc *fmtdesc = to_uvc_format(format->fmt); + + if (fmtdesc->fcc == pixelformat) { + uformat = format->fmt; + break; + } + } + + return uformat; +} + +static struct uvcg_frame *find_closest_frame_by_size(struct uvc_device *uvc, + struct uvcg_format *uformat, + u16 rw, u16 rh) +{ + struct uvc_video *video = &uvc->video; + struct uvcg_format_ptr *format; + struct uvcg_frame_ptr *frame; + struct uvcg_frame *uframe = NULL; + unsigned int d, maxd; + + /* Find the closest image size. The distance between image sizes is + * the size in pixels of the non-overlapping regions between the + * requested size and the frame-specified size. + */ + maxd = (unsigned int)-1; + + list_for_each_entry(format, &uvc->header->formats, entry) { + if (format->fmt->type != uformat->type) + continue; + + list_for_each_entry(frame, &format->fmt->frames, entry) { + u16 w, h; + + w = frame->frm->frame.w_width; + h = frame->frm->frame.w_height; + + d = min(w, rw) * min(h, rh); + d = w*h + rw*rh - 2*d; + if (d < maxd) { + maxd = d; + uframe = frame->frm; + } + + if (maxd == 0) + break; + } + } + + if (!uframe) + uvcg_dbg(&video->uvc->func, "Unsupported size %ux%u\n", rw, rh); + + return uframe; +} /* -------------------------------------------------------------------------- * Requests handling @@ -67,9 +216,9 @@ uvc_v4l2_querycap(struct file *file, void *fh, struct v4l2_capability *cap) struct uvc_device *uvc = video_get_drvdata(vdev); struct usb_composite_dev *cdev = uvc->func.config->cdev; - strlcpy(cap->driver, "g_uvc", sizeof(cap->driver)); - strlcpy(cap->card, cdev->gadget->name, sizeof(cap->card)); - strlcpy(cap->bus_info, dev_name(&cdev->gadget->dev), + strscpy(cap->driver, "g_uvc", sizeof(cap->driver)); + strscpy(cap->card, cdev->gadget->name, sizeof(cap->card)); + strscpy(cap->bus_info, dev_name(&cdev->gadget->dev), sizeof(cap->bus_info)); return 0; } @@ -134,6 +283,139 @@ uvc_v4l2_set_format(struct file *file, void *fh, struct v4l2_format *fmt) return 0; } +static int +uvc_v4l2_try_format(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_device *uvc = video_get_drvdata(vdev); + struct uvc_video *video = &uvc->video; + struct uvcg_format *uformat; + struct uvcg_frame *uframe; + u8 *fcc; + + if (fmt->type != video->queue.queue.type) + return -EINVAL; + + fcc = (u8 *)&fmt->fmt.pix.pixelformat; + uvcg_dbg(&uvc->func, "Trying format 0x%08x (%c%c%c%c): %ux%u\n", + fmt->fmt.pix.pixelformat, + fcc[0], fcc[1], fcc[2], fcc[3], + fmt->fmt.pix.width, fmt->fmt.pix.height); + + uformat = find_format_by_pix(uvc, fmt->fmt.pix.pixelformat); + if (!uformat) + return -EINVAL; + + uframe = find_closest_frame_by_size(uvc, uformat, + fmt->fmt.pix.width, fmt->fmt.pix.height); + if (!uframe) + return -EINVAL; + + fmt->fmt.pix.width = uframe->frame.w_width; + fmt->fmt.pix.height = uframe->frame.w_height; + fmt->fmt.pix.field = V4L2_FIELD_NONE; + fmt->fmt.pix.bytesperline = uvc_v4l2_get_bytesperline(uformat, uframe); + fmt->fmt.pix.sizeimage = uvc_get_frame_size(uformat, uframe); + fmt->fmt.pix.pixelformat = to_uvc_format(uformat)->fcc; + fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB; + fmt->fmt.pix.priv = 0; + + return 0; +} + +static int +uvc_v4l2_enum_frameintervals(struct file *file, void *fh, + struct v4l2_frmivalenum *fival) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_device *uvc = video_get_drvdata(vdev); + struct uvcg_format *uformat = NULL; + struct uvcg_frame *uframe = NULL; + struct uvcg_frame_ptr *frame; + + uformat = find_format_by_pix(uvc, fival->pixel_format); + if (!uformat) + return -EINVAL; + + list_for_each_entry(frame, &uformat->frames, entry) { + if (frame->frm->frame.w_width == fival->width && + frame->frm->frame.w_height == fival->height) { + uframe = frame->frm; + break; + } + } + if (!uframe) + return -EINVAL; + + if (fival->index >= uframe->frame.b_frame_interval_type) + return -EINVAL; + + fival->discrete.numerator = + uframe->dw_frame_interval[fival->index]; + + /* TODO: handle V4L2_FRMIVAL_TYPE_STEPWISE */ + fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; + fival->discrete.denominator = 10000000; + v4l2_simplify_fraction(&fival->discrete.numerator, + &fival->discrete.denominator, 8, 333); + + return 0; +} + +static int +uvc_v4l2_enum_framesizes(struct file *file, void *fh, + struct v4l2_frmsizeenum *fsize) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_device *uvc = video_get_drvdata(vdev); + struct uvcg_format *uformat = NULL; + struct uvcg_frame *uframe = NULL; + + uformat = find_format_by_pix(uvc, fsize->pixel_format); + if (!uformat) + return -EINVAL; + + if (fsize->index >= uformat->num_frames) + return -EINVAL; + + uframe = find_frame_by_index(uvc, uformat, fsize->index + 1); + if (!uframe) + return -EINVAL; + + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete.width = uframe->frame.w_width; + fsize->discrete.height = uframe->frame.w_height; + + return 0; +} + +static int +uvc_v4l2_enum_format(struct file *file, void *fh, struct v4l2_fmtdesc *f) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_device *uvc = video_get_drvdata(vdev); + struct uvc_format_desc *fmtdesc; + struct uvcg_format *uformat; + + if (f->index >= uvc->header->num_fmt) + return -EINVAL; + + uformat = find_format_by_index(uvc, f->index + 1); + if (!uformat) + return -EINVAL; + + if (uformat->type != UVCG_UNCOMPRESSED) + f->flags |= V4L2_FMT_FLAG_COMPRESSED; + + fmtdesc = to_uvc_format(uformat); + f->pixelformat = fmtdesc->fcc; + + strscpy(f->description, fmtdesc->name, sizeof(f->description)); + f->description[strlen(fmtdesc->name) - 1] = 0; + + return 0; +} + static int uvc_v4l2_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *b) { @@ -170,7 +452,7 @@ uvc_v4l2_qbuf(struct file *file, void *fh, struct v4l2_buffer *b) return ret; if (uvc->state == UVC_STATE_STREAMING) - schedule_work(&video->pump); + queue_work(video->async_wq, &video->pump); return ret; } @@ -298,8 +580,12 @@ uvc_v4l2_ioctl_default(struct file *file, void *fh, bool valid_prio, const struct v4l2_ioctl_ops uvc_v4l2_ioctl_ops = { .vidioc_querycap = uvc_v4l2_querycap, + .vidioc_try_fmt_vid_out = uvc_v4l2_try_format, .vidioc_g_fmt_vid_out = uvc_v4l2_get_format, .vidioc_s_fmt_vid_out = uvc_v4l2_set_format, + .vidioc_enum_frameintervals = uvc_v4l2_enum_frameintervals, + .vidioc_enum_framesizes = uvc_v4l2_enum_framesizes, + .vidioc_enum_fmt_vid_out = uvc_v4l2_enum_format, .vidioc_reqbufs = uvc_v4l2_reqbufs, .vidioc_querybuf = uvc_v4l2_querybuf, .vidioc_qbuf = uvc_v4l2_qbuf, diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c index c00ce0e91f5d..bb037fcc90e6 100644 --- a/drivers/usb/gadget/function/uvc_video.c +++ b/drivers/usb/gadget/function/uvc_video.c @@ -277,7 +277,7 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req) spin_unlock_irqrestore(&video->req_lock, flags); if (uvc->state == UVC_STATE_STREAMING) - schedule_work(&video->pump); + queue_work(video->async_wq, &video->pump); } static int @@ -485,7 +485,7 @@ int uvcg_video_enable(struct uvc_video *video, int enable) video->req_int_count = 0; - schedule_work(&video->pump); + queue_work(video->async_wq, &video->pump); return ret; } @@ -499,6 +499,11 @@ int uvcg_video_init(struct uvc_video *video, struct uvc_device *uvc) spin_lock_init(&video->req_lock); INIT_WORK(&video->pump, uvcg_video_pump); + /* Allocate a work queue for asynchronous video pump handler. */ + video->async_wq = alloc_workqueue("uvcgadget", WQ_UNBOUND | WQ_HIGHPRI, 0); + if (!video->async_wq) + return -EINVAL; + video->uvc = uvc; video->fcc = V4L2_PIX_FMT_YUYV; video->bpp = 16; diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c index 728987280373..a9a7b3fc60ec 100644 --- a/drivers/usb/gadget/udc/at91_udc.c +++ b/drivers/usb/gadget/udc/at91_udc.c @@ -994,7 +994,7 @@ static const struct usb_gadget_ops at91_udc_ops = { .udc_stop = at91_stop, /* - * VBUS-powered devices may also also want to support bigger + * VBUS-powered devices may also want to support bigger * power budgets after an appropriate SET_CONFIGURATION. */ /* .vbus_power = at91_vbus_power, */ @@ -1779,12 +1779,14 @@ static void at91udc_of_init(struct at91_udc *udc, struct device_node *np) if (of_property_read_u32(np, "atmel,vbus-polled", &val) == 0) board->vbus_polled = 1; - board->vbus_pin = gpiod_get_from_of_node(np, "atmel,vbus-gpio", 0, - GPIOD_IN, "udc_vbus"); + board->vbus_pin = fwnode_gpiod_get_index(of_fwnode_handle(np), + "atmel,vbus", 0, GPIOD_IN, + "udc_vbus"); if (IS_ERR(board->vbus_pin)) board->vbus_pin = NULL; - board->pullup_pin = gpiod_get_from_of_node(np, "atmel,pullup-gpio", 0, + board->pullup_pin = fwnode_gpiod_get_index(of_fwnode_handle(np), + "atmel,pullup", 0, GPIOD_ASIS, "udc_pullup"); if (IS_ERR(board->pullup_pin)) board->pullup_pin = NULL; diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c index c97cd4bc817c..84605a4d0715 100644 --- a/drivers/usb/gadget/udc/net2272.c +++ b/drivers/usb/gadget/udc/net2272.c @@ -91,7 +91,7 @@ module_param(dma_mode, ushort, 0644); * mode 2 == ep-a 1k, ep-b 1k, ep-c 512db * mode 3 == ep-a 1k, ep-b disabled, ep-c 512db */ -static ushort fifo_mode = 0; +static ushort fifo_mode; module_param(fifo_mode, ushort, 0644); /* @@ -100,7 +100,7 @@ module_param(fifo_mode, ushort, 0644); * USB suspend requests will be ignored. This is acceptable for * self-powered devices. For bus powered devices set this to 1. */ -static ushort enable_suspend = 0; +static ushort enable_suspend; module_param(enable_suspend, ushort, 0644); static void assert_out_naking(struct net2272_ep *ep, const char *where) diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index 61cabb9de6ae..bea346e362b2 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2234,7 +2234,7 @@ static int proc_otg_show(struct seq_file *s) char *ctrl_name = "(UNKNOWN)"; tmp = omap_readl(OTG_REV); - ctrl_name = "tranceiver_ctrl"; + ctrl_name = "transceiver_ctrl"; trans = omap_readw(USB_TRANSCEIVER_CTRL); seq_printf(s, "\nOTG rev %d.%d, %s %05x\n", tmp >> 4, tmp & 0xf, ctrl_name, trans); @@ -2558,7 +2558,7 @@ omap_ep_setup(char *name, u8 addr, u8 type, /* set up driver data structures */ BUG_ON(strlen(name) >= sizeof ep->name); - strlcpy(ep->name, name, sizeof ep->name); + strscpy(ep->name, name, sizeof(ep->name)); INIT_LIST_HEAD(&ep->queue); INIT_LIST_HEAD(&ep->iso); ep->bEndpointAddress = addr; diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 648be3fd476a..615ba0a6fbee 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -38,16 +39,16 @@ #define USB3_USB20_CON 0x204 #define USB3_USB30_CON 0x208 #define USB3_USB_STA 0x210 -#define USB3_DRD_CON 0x218 +#define USB3_DRD_CON(p) ((p)->is_rzv2m ? 0x400 : 0x218) #define USB3_USB_INT_STA_1 0x220 #define USB3_USB_INT_STA_2 0x224 #define USB3_USB_INT_ENA_1 0x228 #define USB3_USB_INT_ENA_2 0x22c #define USB3_STUP_DAT_0 0x230 #define USB3_STUP_DAT_1 0x234 -#define USB3_USB_OTG_STA 0x268 -#define USB3_USB_OTG_INT_STA 0x26c -#define USB3_USB_OTG_INT_ENA 0x270 +#define USB3_USB_OTG_STA(p) ((p)->is_rzv2m ? 0x410 : 0x268) +#define USB3_USB_OTG_INT_STA(p) ((p)->is_rzv2m ? 0x414 : 0x26c) +#define USB3_USB_OTG_INT_ENA(p) ((p)->is_rzv2m ? 0x418 : 0x270) #define USB3_P0_MOD 0x280 #define USB3_P0_CON 0x288 #define USB3_P0_STA 0x28c @@ -135,6 +136,8 @@ #define USB_STA_VBUS_STA BIT(0) /* DRD_CON */ +#define DRD_CON_PERI_RST BIT(31) /* rzv2m only */ +#define DRD_CON_HOST_RST BIT(30) /* rzv2m only */ #define DRD_CON_PERI_CON BIT(24) #define DRD_CON_VBOUT BIT(0) @@ -155,7 +158,7 @@ #define USB_INT_2_PIPE(n) BIT(n) /* USB_OTG_STA, USB_OTG_INT_STA and USB_OTG_INT_ENA */ -#define USB_OTG_IDMON BIT(4) +#define USB_OTG_IDMON(p) ((p)->is_rzv2m ? BIT(0) : BIT(4)) /* P0_MOD */ #define P0_MOD_DIR BIT(6) @@ -255,7 +258,7 @@ #define USB3_EP0_SS_MAX_PACKET_SIZE 512 #define USB3_EP0_HSFS_MAX_PACKET_SIZE 64 #define USB3_EP0_BUF_SIZE 8 -#define USB3_MAX_NUM_PIPES 6 /* This includes PIPE 0 */ +#define USB3_MAX_NUM_PIPES(p) ((p)->is_rzv2m ? 16 : 6) /* This includes PIPE 0 */ #define USB3_WAIT_US 3 #define USB3_DMA_NUM_SETTING_AREA 4 /* @@ -326,10 +329,13 @@ struct renesas_usb3_priv { int num_ramif; int ramsize_per_pipe; /* unit = bytes */ bool workaround_for_vbus; /* if true, don't check vbus signal */ + bool is_rzv2m; /* if true, RZ/V2M SoC */ }; struct renesas_usb3 { void __iomem *reg; + struct reset_control *drd_rstc; + struct reset_control *usbp_rstc; struct usb_gadget gadget; struct usb_gadget_driver *driver; @@ -363,6 +369,7 @@ struct renesas_usb3 { bool forced_b_device; bool start_to_connect; bool role_sw_by_connector; + bool is_rzv2m; }; #define gadget_to_renesas_usb3(_gadget) \ @@ -467,7 +474,7 @@ static void usb3_disable_pipe_irq(struct renesas_usb3 *usb3, int num) static bool usb3_is_host(struct renesas_usb3 *usb3) { - return !(usb3_read(usb3, USB3_DRD_CON) & DRD_CON_PERI_CON); + return !(usb3_read(usb3, USB3_DRD_CON(usb3)) & DRD_CON_PERI_CON); } static void usb3_init_axi_bridge(struct renesas_usb3 *usb3) @@ -674,10 +681,20 @@ static void renesas_usb3_role_work(struct work_struct *work) static void usb3_set_mode(struct renesas_usb3 *usb3, bool host) { + if (usb3->is_rzv2m) { + if (host) { + usb3_set_bit(usb3, DRD_CON_PERI_RST, USB3_DRD_CON(usb3)); + usb3_clear_bit(usb3, DRD_CON_HOST_RST, USB3_DRD_CON(usb3)); + } else { + usb3_set_bit(usb3, DRD_CON_HOST_RST, USB3_DRD_CON(usb3)); + usb3_clear_bit(usb3, DRD_CON_PERI_RST, USB3_DRD_CON(usb3)); + } + } + if (host) - usb3_clear_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON); + usb3_clear_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON(usb3)); else - usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON); + usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON(usb3)); } static void usb3_set_mode_by_role_sw(struct renesas_usb3 *usb3, bool host) @@ -693,9 +710,9 @@ static void usb3_set_mode_by_role_sw(struct renesas_usb3 *usb3, bool host) static void usb3_vbus_out(struct renesas_usb3 *usb3, bool enable) { if (enable) - usb3_set_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON); + usb3_set_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON(usb3)); else - usb3_clear_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON); + usb3_clear_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON(usb3)); } static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev) @@ -716,7 +733,7 @@ static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev) static bool usb3_is_a_device(struct renesas_usb3 *usb3) { - return !(usb3_read(usb3, USB3_USB_OTG_STA) & USB_OTG_IDMON); + return !(usb3_read(usb3, USB3_USB_OTG_STA(usb3)) & USB_OTG_IDMON(usb3)); } static void usb3_check_id(struct renesas_usb3 *usb3) @@ -739,8 +756,8 @@ static void renesas_usb3_init_controller(struct renesas_usb3 *usb3) usb3_set_bit(usb3, USB_COM_CON_PN_WDATAIF_NL | USB_COM_CON_PN_RDATAIF_NL | USB_COM_CON_PN_LSTTR_PP, USB3_USB_COM_CON); - usb3_write(usb3, USB_OTG_IDMON, USB3_USB_OTG_INT_STA); - usb3_write(usb3, USB_OTG_IDMON, USB3_USB_OTG_INT_ENA); + usb3_write(usb3, USB_OTG_IDMON(usb3), USB3_USB_OTG_INT_STA(usb3)); + usb3_write(usb3, USB_OTG_IDMON(usb3), USB3_USB_OTG_INT_ENA(usb3)); usb3_check_id(usb3); usb3_check_vbus(usb3); @@ -750,7 +767,7 @@ static void renesas_usb3_stop_controller(struct renesas_usb3 *usb3) { usb3_disconnect(usb3); usb3_write(usb3, 0, USB3_P0_INT_ENA); - usb3_write(usb3, 0, USB3_USB_OTG_INT_ENA); + usb3_write(usb3, 0, USB3_USB_OTG_INT_ENA(usb3)); usb3_write(usb3, 0, USB3_USB_INT_ENA_1); usb3_write(usb3, 0, USB3_USB_INT_ENA_2); usb3_write(usb3, 0, USB3_AXI_INT_ENA); @@ -2005,9 +2022,15 @@ static void usb3_irq_idmon_change(struct renesas_usb3 *usb3) usb3_check_id(usb3); } -static void usb3_irq_otg_int(struct renesas_usb3 *usb3, u32 otg_int_sta) +static void usb3_irq_otg_int(struct renesas_usb3 *usb3) { - if (otg_int_sta & USB_OTG_IDMON) + u32 otg_int_sta = usb3_read(usb3, USB3_USB_OTG_INT_STA(usb3)); + + otg_int_sta &= usb3_read(usb3, USB3_USB_OTG_INT_ENA(usb3)); + if (otg_int_sta) + usb3_write(usb3, otg_int_sta, USB3_USB_OTG_INT_STA(usb3)); + + if (otg_int_sta & USB_OTG_IDMON(usb3)) usb3_irq_idmon_change(usb3); } @@ -2015,7 +2038,6 @@ static void usb3_irq_epc(struct renesas_usb3 *usb3) { u32 int_sta_1 = usb3_read(usb3, USB3_USB_INT_STA_1); u32 int_sta_2 = usb3_read(usb3, USB3_USB_INT_STA_2); - u32 otg_int_sta = usb3_read(usb3, USB3_USB_OTG_INT_STA); int_sta_1 &= usb3_read(usb3, USB3_USB_INT_ENA_1); if (int_sta_1) { @@ -2027,11 +2049,8 @@ static void usb3_irq_epc(struct renesas_usb3 *usb3) if (int_sta_2) usb3_irq_epc_int_2(usb3, int_sta_2); - otg_int_sta &= usb3_read(usb3, USB3_USB_OTG_INT_ENA); - if (otg_int_sta) { - usb3_write(usb3, otg_int_sta, USB3_USB_OTG_INT_STA); - usb3_irq_otg_int(usb3, otg_int_sta); - } + if (!usb3->is_rzv2m) + usb3_irq_otg_int(usb3); } static void usb3_irq_dma_int(struct renesas_usb3 *usb3, u32 dma_sta) @@ -2085,6 +2104,15 @@ static irqreturn_t renesas_usb3_irq(int irq, void *_usb3) return ret; } +static irqreturn_t renesas_usb3_otg_irq(int irq, void *_usb3) +{ + struct renesas_usb3 *usb3 = _usb3; + + usb3_irq_otg_int(usb3); + + return IRQ_HANDLED; +} + static void usb3_write_pn_mod(struct renesas_usb3_ep *usb3_ep, const struct usb_endpoint_descriptor *desc) { @@ -2571,6 +2599,8 @@ static int renesas_usb3_remove(struct platform_device *pdev) usb_role_switch_unregister(usb3->role_sw); usb_del_gadget_udc(&usb3->gadget); + reset_control_assert(usb3->usbp_rstc); + reset_control_assert(usb3->drd_rstc); renesas_usb3_dma_free_prd(usb3, &pdev->dev); __renesas_usb3_ep_free_request(usb3->ep0_req); @@ -2589,8 +2619,8 @@ static int renesas_usb3_init_ep(struct renesas_usb3 *usb3, struct device *dev, usb3->num_usb3_eps = priv->ramsize_per_ramif * priv->num_ramif * 2 / priv->ramsize_per_pipe + 1; - if (usb3->num_usb3_eps > USB3_MAX_NUM_PIPES) - usb3->num_usb3_eps = USB3_MAX_NUM_PIPES; + if (usb3->num_usb3_eps > USB3_MAX_NUM_PIPES(usb3)) + usb3->num_usb3_eps = USB3_MAX_NUM_PIPES(usb3); usb3->usb3_ep = devm_kcalloc(dev, usb3->num_usb3_eps, sizeof(*usb3_ep), @@ -2707,6 +2737,13 @@ static const struct renesas_usb3_priv renesas_usb3_priv_r8a77990 = { .workaround_for_vbus = true, }; +static const struct renesas_usb3_priv renesas_usb3_priv_rzv2m = { + .ramsize_per_ramif = SZ_16K, + .num_ramif = 1, + .ramsize_per_pipe = SZ_4K, + .is_rzv2m = true, +}; + static const struct of_device_id usb3_of_match[] = { { .compatible = "renesas,r8a774c0-usb3-peri", @@ -2717,6 +2754,9 @@ static const struct of_device_id usb3_of_match[] = { }, { .compatible = "renesas,r8a77990-usb3-peri", .data = &renesas_usb3_priv_r8a77990, + }, { + .compatible = "renesas,rzv2m-usb3-peri", + .data = &renesas_usb3_priv_rzv2m, }, { .compatible = "renesas,rcar-gen3-usb3-peri", .data = &renesas_usb3_priv_gen3, @@ -2748,7 +2788,7 @@ static struct usb_role_switch_desc renesas_usb3_role_switch_desc = { static int renesas_usb3_probe(struct platform_device *pdev) { struct renesas_usb3 *usb3; - int irq, ret; + int irq, drd_irq, ret; const struct renesas_usb3_priv *priv; const struct soc_device_attribute *attr; @@ -2762,10 +2802,18 @@ static int renesas_usb3_probe(struct platform_device *pdev) if (irq < 0) return irq; + if (priv->is_rzv2m) { + drd_irq = platform_get_irq_byname(pdev, "drd"); + if (drd_irq < 0) + return drd_irq; + } + usb3 = devm_kzalloc(&pdev->dev, sizeof(*usb3), GFP_KERNEL); if (!usb3) return -ENOMEM; + usb3->is_rzv2m = priv->is_rzv2m; + usb3->reg = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(usb3->reg)) return PTR_ERR(usb3->reg); @@ -2787,6 +2835,14 @@ static int renesas_usb3_probe(struct platform_device *pdev) if (ret < 0) return ret; + if (usb3->is_rzv2m) { + ret = devm_request_irq(&pdev->dev, drd_irq, + renesas_usb3_otg_irq, 0, + dev_name(&pdev->dev), usb3); + if (ret < 0) + return ret; + } + INIT_WORK(&usb3->extcon_work, renesas_usb3_extcon_work); usb3->extcon = devm_extcon_dev_allocate(&pdev->dev, renesas_usb3_cable); if (IS_ERR(usb3->extcon)) @@ -2817,10 +2873,27 @@ static int renesas_usb3_probe(struct platform_device *pdev) goto err_add_udc; } + usb3->drd_rstc = devm_reset_control_get_optional_shared(&pdev->dev, + "drd_reset"); + if (IS_ERR(usb3->drd_rstc)) { + ret = PTR_ERR(usb3->drd_rstc); + goto err_add_udc; + } + + usb3->usbp_rstc = devm_reset_control_get_optional_shared(&pdev->dev, + "aresetn_p"); + if (IS_ERR(usb3->usbp_rstc)) { + ret = PTR_ERR(usb3->usbp_rstc); + goto err_add_udc; + } + + reset_control_deassert(usb3->drd_rstc); + reset_control_deassert(usb3->usbp_rstc); + pm_runtime_enable(&pdev->dev); ret = usb_add_gadget_udc(&pdev->dev, &usb3->gadget); if (ret < 0) - goto err_add_udc; + goto err_reset; ret = device_create_file(&pdev->dev, &dev_attr_role); if (ret < 0) @@ -2858,6 +2931,10 @@ static int renesas_usb3_probe(struct platform_device *pdev) err_dev_create: usb_del_gadget_udc(&usb3->gadget); +err_reset: + reset_control_assert(usb3->usbp_rstc); + reset_control_assert(usb3->drd_rstc); + err_add_udc: renesas_usb3_dma_free_prd(usb3, &pdev->dev); diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c index c6625aeb7bca..8c57b191e52b 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.c +++ b/drivers/usb/gadget/udc/s3c2410_udc.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include @@ -1419,8 +1419,7 @@ static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on) { dprintk(DEBUG_NORMAL, "%s()\n", __func__); - if (udc_info && (udc_info->udc_command || - gpio_is_valid(udc_info->pullup_pin))) { + if (udc_info && (udc_info->udc_command || udc->pullup_gpiod)) { if (is_on) s3c2410_udc_enable(udc); @@ -1467,9 +1466,7 @@ static irqreturn_t s3c2410_udc_vbus_irq(int irq, void *_dev) dprintk(DEBUG_NORMAL, "%s()\n", __func__); - value = gpio_get_value(udc_info->vbus_pin) ? 1 : 0; - if (udc_info->vbus_pin_inverted) - value = !value; + value = gpiod_get_value(dev->vbus_gpiod); if (value != dev->vbus) s3c2410_udc_vbus_session(&dev->gadget, value); @@ -1504,14 +1501,15 @@ static const struct usb_gadget_ops s3c2410_ops = { .udc_stop = s3c2410_udc_stop, }; -static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd) +static void s3c2410_udc_command(struct s3c2410_udc *udc, + enum s3c2410_udc_cmd_e cmd) { if (!udc_info) return; if (udc_info->udc_command) { udc_info->udc_command(cmd); - } else if (gpio_is_valid(udc_info->pullup_pin)) { + } else if (udc->pullup_gpiod) { int value; switch (cmd) { @@ -1524,9 +1522,8 @@ static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd) default: return; } - value ^= udc_info->pullup_pin_inverted; - gpio_set_value(udc_info->pullup_pin, value); + gpiod_set_value(udc->pullup_gpiod, value); } } @@ -1551,7 +1548,7 @@ static void s3c2410_udc_disable(struct s3c2410_udc *dev) udc_write(0x1F, S3C2410_UDC_EP_INT_REG); /* Good bye, cruel world */ - s3c2410_udc_command(S3C2410_UDC_P_DISABLE); + s3c2410_udc_command(dev, S3C2410_UDC_P_DISABLE); /* Set speed to unknown */ dev->gadget.speed = USB_SPEED_UNKNOWN; @@ -1613,7 +1610,7 @@ static void s3c2410_udc_enable(struct s3c2410_udc *dev) udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_EN_REG); /* time to say "hello, world" */ - s3c2410_udc_command(S3C2410_UDC_P_ENABLE); + s3c2410_udc_command(dev, S3C2410_UDC_P_ENABLE); } static int s3c2410_udc_start(struct usb_gadget *g, @@ -1802,14 +1799,15 @@ static int s3c2410_udc_probe(struct platform_device *pdev) dev_dbg(dev, "got irq %i\n", irq_usbd); - if (udc_info && udc_info->vbus_pin > 0) { - retval = gpio_request(udc_info->vbus_pin, "udc vbus"); - if (retval < 0) { - dev_err(dev, "cannot claim vbus pin\n"); - goto err_int; - } + udc->vbus_gpiod = gpiod_get_optional(dev, "vbus", GPIOD_IN); + if (IS_ERR(udc->vbus_gpiod)) { + retval = PTR_ERR(udc->vbus_gpiod); + goto err_int; + } + if (udc->vbus_gpiod) { + gpiod_set_consumer_name(udc->vbus_gpiod, "udc vbus"); - irq = gpio_to_irq(udc_info->vbus_pin); + irq = gpiod_to_irq(udc->vbus_gpiod); if (irq < 0) { dev_err(dev, "no irq for gpio vbus pin\n"); retval = irq; @@ -1833,16 +1831,12 @@ static int s3c2410_udc_probe(struct platform_device *pdev) udc->vbus = 1; } - if (udc_info && !udc_info->udc_command && - gpio_is_valid(udc_info->pullup_pin)) { - - retval = gpio_request_one(udc_info->pullup_pin, - udc_info->vbus_pin_inverted ? - GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, - "udc pullup"); - if (retval) - goto err_vbus_irq; + udc->pullup_gpiod = gpiod_get_optional(dev, "pullup", GPIOD_OUT_LOW); + if (IS_ERR(udc->pullup_gpiod)) { + retval = PTR_ERR(udc->pullup_gpiod); + goto err_vbus_irq; } + gpiod_set_consumer_name(udc->pullup_gpiod, "udc pullup"); retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget); if (retval) @@ -1856,15 +1850,10 @@ static int s3c2410_udc_probe(struct platform_device *pdev) return 0; err_add_udc: - if (udc_info && !udc_info->udc_command && - gpio_is_valid(udc_info->pullup_pin)) - gpio_free(udc_info->pullup_pin); err_vbus_irq: - if (udc_info && udc_info->vbus_pin > 0) - free_irq(gpio_to_irq(udc_info->vbus_pin), udc); + if (udc->vbus_gpiod) + free_irq(gpiod_to_irq(udc->vbus_gpiod), udc); err_gpio_claim: - if (udc_info && udc_info->vbus_pin > 0) - gpio_free(udc_info->vbus_pin); err_int: free_irq(irq_usbd, udc); err_udc_clk: @@ -1885,7 +1874,6 @@ err_usb_bus_clk: static int s3c2410_udc_remove(struct platform_device *pdev) { struct s3c2410_udc *udc = platform_get_drvdata(pdev); - unsigned int irq; dev_dbg(&pdev->dev, "%s()\n", __func__); @@ -1895,14 +1883,8 @@ static int s3c2410_udc_remove(struct platform_device *pdev) usb_del_gadget_udc(&udc->gadget); debugfs_remove(debugfs_lookup("registers", s3c2410_udc_debugfs_root)); - if (udc_info && !udc_info->udc_command && - gpio_is_valid(udc_info->pullup_pin)) - gpio_free(udc_info->pullup_pin); - - if (udc_info && udc_info->vbus_pin > 0) { - irq = gpio_to_irq(udc_info->vbus_pin); - free_irq(irq, udc); - } + if (udc->vbus_gpiod) + free_irq(gpiod_to_irq(udc->vbus_gpiod), udc); free_irq(irq_usbd, udc); @@ -1926,14 +1908,18 @@ static int s3c2410_udc_remove(struct platform_device *pdev) static int s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message) { - s3c2410_udc_command(S3C2410_UDC_P_DISABLE); + struct s3c2410_udc *udc = platform_get_drvdata(pdev); + + s3c2410_udc_command(udc, S3C2410_UDC_P_DISABLE); return 0; } static int s3c2410_udc_resume(struct platform_device *pdev) { - s3c2410_udc_command(S3C2410_UDC_P_ENABLE); + struct s3c2410_udc *udc = platform_get_drvdata(pdev); + + s3c2410_udc_command(udc, S3C2410_UDC_P_ENABLE); return 0; } diff --git a/drivers/usb/gadget/udc/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h index 135a5bff3c74..cdbf202e5ee8 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.h +++ b/drivers/usb/gadget/udc/s3c2410_udc.h @@ -83,6 +83,9 @@ struct s3c2410_udc { u32 port_status; int ep0state; + struct gpio_desc *vbus_gpiod; + struct gpio_desc *pullup_gpiod; + unsigned got_irq : 1; unsigned req_std : 1; diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c index 3c37effdfa64..76919d7570d2 100644 --- a/drivers/usb/gadget/udc/tegra-xudc.c +++ b/drivers/usb/gadget/udc/tegra-xudc.c @@ -2,7 +2,7 @@ /* * NVIDIA Tegra XUSB device mode controller * - * Copyright (c) 2013-2019, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2013-2022, NVIDIA CORPORATION. All rights reserved. * Copyright (c) 2015, Google Inc. */ @@ -702,6 +702,8 @@ static void tegra_xudc_device_mode_on(struct tegra_xudc *xudc) pm_runtime_get_sync(xudc->dev); + tegra_phy_xusb_utmi_pad_power_on(xudc->curr_utmi_phy); + err = phy_power_on(xudc->curr_utmi_phy); if (err < 0) dev_err(xudc->dev, "UTMI power on failed: %d\n", err); @@ -756,6 +758,8 @@ static void tegra_xudc_device_mode_off(struct tegra_xudc *xudc) /* Make sure interrupt handler has completed before powergating. */ synchronize_irq(xudc->irq); + tegra_phy_xusb_utmi_pad_power_down(xudc->curr_utmi_phy); + err = phy_power_off(xudc->curr_utmi_phy); if (err < 0) dev_err(xudc->dev, "UTMI PHY power off failed: %d\n", err); diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index fd9264cf6c87..247568bc17a2 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -205,12 +205,12 @@ config USB_EHCI_FSL Variation of ARC USB block used in some Freescale chips. config USB_EHCI_HCD_NPCM7XX - tristate "Support for Nuvoton NPCM7XX on-chip EHCI USB controller" - depends on (USB_EHCI_HCD && ARCH_NPCM7XX) || COMPILE_TEST - default y if (USB_EHCI_HCD && ARCH_NPCM7XX) + tristate "Support for Nuvoton NPCM on-chip EHCI USB controller" + depends on (USB_EHCI_HCD && ARCH_NPCM) || COMPILE_TEST + default y if (USB_EHCI_HCD && ARCH_NPCM) help Enables support for the on-chip EHCI controller on - Nuvoton NPCM7XX chips. + Nuvoton NPCM chips. config USB_EHCI_HCD_OMAP tristate "EHCI support for OMAP3 and later chips" diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 05d41fd65f25..8b775e7bab06 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -25,8 +25,6 @@ #define DRIVER_DESC "EHCI Atmel driver" -static const char hcd_name[] = "ehci-atmel"; - #define EHCI_INSNREG(index) ((index) * 4 + 0x90) #define EHCI_INSNREG08_HSIC_EN BIT(2) @@ -239,7 +237,6 @@ static int __init ehci_atmel_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); ehci_init_driver(&ehci_atmel_hc_driver, &ehci_atmel_drv_overrides); return platform_driver_register(&ehci_atmel_driver); } diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index 1a9b7572e17f..a333231616f4 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include #include @@ -32,7 +32,6 @@ (EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 | \ EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN) -static const char hcd_name[] = "ehci-exynos"; static struct hc_driver __read_mostly exynos_ehci_hc_driver; #define PHY_NUMBER 3 @@ -132,20 +131,13 @@ static void exynos_ehci_phy_disable(struct device *dev) static void exynos_setup_vbus_gpio(struct device *dev) { + struct gpio_desc *gpio; int err; - int gpio; - if (!dev->of_node) - return; - - gpio = of_get_named_gpio(dev->of_node, "samsung,vbus-gpio", 0); - if (!gpio_is_valid(gpio)) - return; - - err = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH, - "ehci_vbus_gpio"); + gpio = devm_gpiod_get_optional(dev, "samsung,vbus", GPIOD_OUT_HIGH); + err = PTR_ERR_OR_ZERO(gpio); if (err) - dev_err(dev, "can't request ehci vbus gpio %d", gpio); + dev_err(dev, "can't request ehci vbus gpio: %d\n", err); } static int exynos_ehci_probe(struct platform_device *pdev) @@ -347,7 +339,6 @@ static int __init ehci_exynos_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); ehci_init_driver(&exynos_ehci_hc_driver, &exynos_overrides); return platform_driver_register(&exynos_ehci_driver); } diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 896c0d107f72..9cea785934e5 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -722,8 +722,6 @@ static int __init ehci_fsl_init(void) if (usb_disabled()) return -ENODEV; - pr_info(DRV_NAME ": " DRIVER_DESC "\n"); - ehci_init_driver(&fsl_ehci_hc_driver, &ehci_fsl_overrides); fsl_ehci_hc_driver.product_desc = diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 684164fa9716..a1930db0da1c 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1351,7 +1351,6 @@ static int __init ehci_hcd_init(void) if (usb_disabled()) return -ENODEV; - printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name); set_bit(USB_EHCI_LOADED, &usb_hcds_loaded); if (test_bit(USB_UHCI_LOADED, &usb_hcds_loaded) || test_bit(USB_OHCI_LOADED, &usb_hcds_loaded)) diff --git a/drivers/usb/host/ehci-npcm7xx.c b/drivers/usb/host/ehci-npcm7xx.c index 6b5a7a873e01..63af1a827fcb 100644 --- a/drivers/usb/host/ehci-npcm7xx.c +++ b/drivers/usb/host/ehci-npcm7xx.c @@ -22,19 +22,8 @@ #include "ehci.h" -#include -#include - #define DRIVER_DESC "EHCI npcm7xx driver" -static const char hcd_name[] = "npcm7xx-ehci"; - -#define USB2PHYCTL_OFFSET 0x144 - -#define IPSRST2_OFFSET 0x24 -#define IPSRST3_OFFSET 0x34 - - static struct hc_driver __read_mostly ehci_npcm7xx_hc_driver; static int __maybe_unused ehci_npcm7xx_drv_suspend(struct device *dev) @@ -60,52 +49,12 @@ static int npcm7xx_ehci_hcd_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd; struct resource *res; - struct regmap *gcr_regmap; - struct regmap *rst_regmap; const struct hc_driver *driver = &ehci_npcm7xx_hc_driver; int irq; int retval; dev_dbg(&pdev->dev, "initializing npcm7xx ehci USB Controller\n"); - gcr_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-gcr"); - if (IS_ERR(gcr_regmap)) { - dev_err(&pdev->dev, "%s: failed to find nuvoton,npcm750-gcr\n", - __func__); - return PTR_ERR(gcr_regmap); - } - - rst_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-rst"); - if (IS_ERR(rst_regmap)) { - dev_err(&pdev->dev, "%s: failed to find nuvoton,npcm750-rst\n", - __func__); - return PTR_ERR(rst_regmap); - } - - /********* phy init ******/ - // reset usb host - regmap_update_bits(rst_regmap, IPSRST2_OFFSET, - (0x1 << 26), (0x1 << 26)); - regmap_update_bits(rst_regmap, IPSRST3_OFFSET, - (0x1 << 25), (0x1 << 25)); - regmap_update_bits(gcr_regmap, USB2PHYCTL_OFFSET, - (0x1 << 28), 0); - - udelay(1); - - // enable phy - regmap_update_bits(rst_regmap, IPSRST3_OFFSET, - (0x1 << 25), 0); - - udelay(50); // enable phy - - regmap_update_bits(gcr_regmap, USB2PHYCTL_OFFSET, - (0x1 << 28), (0x1 << 28)); - - // enable host - regmap_update_bits(rst_regmap, IPSRST2_OFFSET, - (0x1 << 26), 0); - if (usb_disabled()) return -ENODEV; @@ -191,8 +140,6 @@ static int __init ehci_npcm7xx_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_npcm7xx_hc_driver, NULL); return platform_driver_register(&npcm7xx_ehci_hcd_driver); } diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 8c45bc17a580..7dd984722a7f 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -284,8 +284,6 @@ static int __init ehci_omap_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides); return platform_driver_register(&ehci_hcd_omap_driver); } diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 3626758b3e2a..a3454a3ea4e0 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -65,8 +65,6 @@ struct orion_ehci_hcd { struct phy *phy; }; -static const char hcd_name[] = "ehci-orion"; - static struct hc_driver __read_mostly ehci_orion_hc_driver; /* @@ -361,8 +359,6 @@ static int __init ehci_orion_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides); return platform_driver_register(&ehci_orion_driver); } diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 9937c5a7efc2..17f8b6ea0c35 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -382,7 +382,7 @@ static int ehci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { if (is_bypassed_id(pdev)) return -ENODEV; - return usb_hcd_pci_probe(pdev, id, &ehci_pci_hc_driver); + return usb_hcd_pci_probe(pdev, &ehci_pci_hc_driver); } static void ehci_pci_remove(struct pci_dev *pdev) @@ -423,8 +423,6 @@ static int __init ehci_pci_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_pci_hc_driver, &pci_overrides); /* Entries for the PCI suspend/resume callbacks are special */ diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index 6924f0316e9a..fe497c876d76 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -53,8 +53,6 @@ struct ehci_platform_priv { struct delayed_work poll_work; }; -static const char hcd_name[] = "ehci-platform"; - static int ehci_platform_reset(struct usb_hcd *hcd) { struct platform_device *pdev = to_platform_device(hcd->self.controller); @@ -529,8 +527,6 @@ static int __init ehci_platform_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides); return platform_driver_register(&ehci_platform_driver); } diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 807e64991e3e..666f5c4db25a 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -645,7 +645,7 @@ qh_urb_transaction ( token |= (1 /* "in" */ << 8); /* else it's already initted to "out" pid (0 << 8) */ - maxpacket = usb_maxpacket(urb->dev, urb->pipe); + maxpacket = usb_endpoint_maxp(&urb->ep->desc); /* * buffer gets wrapped in one or more qtds; @@ -1218,7 +1218,7 @@ static int ehci_submit_single_step_set_feature( token |= (1 /* "in" */ << 8); /*This is IN stage*/ - maxpacket = usb_maxpacket(urb->dev, urb->pipe); + maxpacket = usb_endpoint_maxp(&urb->ep->desc); qtd_fill(ehci, qtd, buf, len, token, maxpacket); diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index 3694e450a11a..c4ddd1022f60 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -24,8 +24,6 @@ #define DRIVER_DESC "EHCI SPEAr driver" -static const char hcd_name[] = "SPEAr-ehci"; - struct spear_ehci { struct clk *clk; }; @@ -167,8 +165,6 @@ static int __init ehci_spear_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_spear_hc_driver, &spear_overrides); return platform_driver_register(&spear_ehci_hcd_driver); } diff --git a/drivers/usb/host/ehci-st.c b/drivers/usb/host/ehci-st.c index f74433aac948..f731dc98c533 100644 --- a/drivers/usb/host/ehci-st.c +++ b/drivers/usb/host/ehci-st.c @@ -42,8 +42,6 @@ struct st_ehci_platform_priv { #define hcd_to_ehci_priv(h) \ ((struct st_ehci_platform_priv *)hcd_to_ehci(h)->priv) -static const char hcd_name[] = "ehci-st"; - #define EHCI_CAPS_SIZE 0x10 #define AHB2STBUS_INSREG01 (EHCI_CAPS_SIZE + 0x84) @@ -346,8 +344,6 @@ static int __init ehci_platform_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides); return platform_driver_register(&ehci_platform_driver); } diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index 2ba09c3fbc2f..95a44462bed0 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -25,8 +25,8 @@ #include #include #include -#include #include +#include #include #include #include "fhci.h" @@ -150,15 +150,15 @@ int fhci_ioports_check_bus_state(struct fhci_hcd *fhci) u8 bits = 0; /* check USBOE,if transmitting,exit */ - if (!gpio_get_value(fhci->gpios[GPIO_USBOE])) + if (!gpiod_get_value(fhci->gpiods[GPIO_USBOE])) return -1; /* check USBRP */ - if (gpio_get_value(fhci->gpios[GPIO_USBRP])) + if (gpiod_get_value(fhci->gpiods[GPIO_USBRP])) bits |= 0x2; /* check USBRN */ - if (gpio_get_value(fhci->gpios[GPIO_USBRN])) + if (gpiod_get_value(fhci->gpiods[GPIO_USBRN])) bits |= 0x1; return bits; @@ -630,40 +630,23 @@ static int of_fhci_probe(struct platform_device *ofdev) /* GPIOs and pins */ for (i = 0; i < NUM_GPIOS; i++) { - int gpio; - enum of_gpio_flags flags; + if (i < GPIO_SPEED) + fhci->gpiods[i] = devm_gpiod_get_index(dev, + NULL, i, GPIOD_IN); - gpio = of_get_gpio_flags(node, i, &flags); - fhci->gpios[i] = gpio; - fhci->alow_gpios[i] = flags & OF_GPIO_ACTIVE_LOW; + else + fhci->gpiods[i] = devm_gpiod_get_index_optional(dev, + NULL, i, GPIOD_OUT_LOW); - if (!gpio_is_valid(gpio)) { - if (i < GPIO_SPEED) { - dev_err(dev, "incorrect GPIO%d: %d\n", - i, gpio); - goto err_gpios; - } else { - dev_info(dev, "assuming board doesn't have " - "%s gpio\n", i == GPIO_SPEED ? - "speed" : "power"); - continue; - } - } - - ret = gpio_request(gpio, dev_name(dev)); - if (ret) { - dev_err(dev, "failed to request gpio %d", i); + if (IS_ERR(fhci->gpiods[i])) { + dev_err(dev, "incorrect GPIO%d: %ld\n", + i, PTR_ERR(fhci->gpiods[i])); goto err_gpios; } - - if (i >= GPIO_SPEED) { - ret = gpio_direction_output(gpio, 0); - if (ret) { - dev_err(dev, "failed to set gpio %d as " - "an output\n", i); - i++; - goto err_gpios; - } + if (!fhci->gpiods[i]) { + dev_info(dev, "assuming board doesn't have " + "%s gpio\n", i == GPIO_SPEED ? + "speed" : "power"); } } @@ -766,10 +749,6 @@ err_pins: while (--j >= 0) qe_pin_free(fhci->pins[j]); err_gpios: - while (--i >= 0) { - if (gpio_is_valid(fhci->gpios[i])) - gpio_free(fhci->gpios[i]); - } cpm_muram_free(pram_addr); err_pram: iounmap(hcd->regs); @@ -782,18 +761,12 @@ static int fhci_remove(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct fhci_hcd *fhci = hcd_to_fhci(hcd); - int i; int j; usb_remove_hcd(hcd); free_irq(fhci->timer->irq, hcd); gtm_put_timer16(fhci->timer); cpm_muram_free(cpm_muram_offset(fhci->pram)); - for (i = 0; i < NUM_GPIOS; i++) { - if (!gpio_is_valid(fhci->gpios[i])) - continue; - gpio_free(fhci->gpios[i]); - } for (j = 0; j < NUM_PINS; j++) qe_pin_free(fhci->pins[j]); fhci_dfs_destroy(fhci); diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c index c359dcdb9b13..5f48660ebdfa 100644 --- a/drivers/usb/host/fhci-hub.c +++ b/drivers/usb/host/fhci-hub.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include #include "fhci.h" @@ -38,13 +38,12 @@ static u8 root_hub_des[] = { static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on) { - int gpio = fhci->gpios[gpio_nr]; - bool alow = fhci->alow_gpios[gpio_nr]; + struct gpio_desc *gpiod = fhci->gpiods[gpio_nr]; - if (!gpio_is_valid(gpio)) + if (!gpiod) return; - gpio_set_value(gpio, on ^ alow); + gpiod_set_value(gpiod, on); mdelay(5); } @@ -129,9 +128,9 @@ void fhci_io_port_generate_reset(struct fhci_hcd *fhci) { fhci_dbg(fhci, "-> %s\n", __func__); - gpio_direction_output(fhci->gpios[GPIO_USBOE], 0); - gpio_direction_output(fhci->gpios[GPIO_USBTP], 0); - gpio_direction_output(fhci->gpios[GPIO_USBTN], 0); + gpiod_direction_output(fhci->gpiods[GPIO_USBOE], 0); + gpiod_direction_output(fhci->gpiods[GPIO_USBTP], 0); + gpiod_direction_output(fhci->gpiods[GPIO_USBTN], 0); mdelay(5); diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h index 81fbc019a9b3..1f57b0989485 100644 --- a/drivers/usb/host/fhci.h +++ b/drivers/usb/host/fhci.h @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -242,8 +243,7 @@ struct fhci_hcd { enum qe_clock fullspeed_clk; enum qe_clock lowspeed_clk; struct qe_pin *pins[NUM_PINS]; - int gpios[NUM_GPIOS]; - bool alow_gpios[NUM_GPIOS]; + struct gpio_desc *gpiods[NUM_GPIOS]; struct qe_usb_ctlr __iomem *regs; /* I/O memory used to communicate */ struct fhci_pram __iomem *pram; /* Parameter RAM */ diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index f8c111e08a0d..3d1dbcf4c073 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -5692,7 +5692,6 @@ static int __init fotg210_hcd_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); set_bit(USB_EHCI_LOADED, &usb_hcds_loaded); if (test_bit(USB_UHCI_LOADED, &usb_hcds_loaded) || test_bit(USB_OHCI_LOADED, &usb_hcds_loaded)) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 98326465e2dc..533537ef3c21 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -62,8 +62,6 @@ struct ohci_at91_priv { #define DRIVER_DESC "OHCI Atmel driver" -static const char hcd_name[] = "ohci-atmel"; - static struct hc_driver __read_mostly ohci_at91_hc_driver; static const struct ohci_driver_overrides ohci_at91_drv_overrides __initconst = { @@ -699,7 +697,6 @@ static int __init ohci_at91_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); ohci_init_driver(&ohci_at91_hc_driver, &ohci_at91_drv_overrides); /* diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index 1371b0c249ec..d4818e8d652b 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -551,7 +551,6 @@ static int __init ohci_da8xx_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", DRV_NAME); ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides); /* diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 5f5e8a64c8e2..8d7977fd5d3b 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -21,7 +21,6 @@ #define DRIVER_DESC "OHCI Exynos driver" -static const char hcd_name[] = "ohci-exynos"; static struct hc_driver __read_mostly exynos_ohci_hc_driver; #define to_exynos_ohci(hcd) (struct exynos_ohci_hcd *)(hcd_to_ohci(hcd)->priv) @@ -310,7 +309,6 @@ static int __init ohci_exynos_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); ohci_init_driver(&exynos_ohci_hc_driver, &exynos_overrides); return platform_driver_register(&exynos_ohci_driver); } diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index c4c821c2288c..0457dd9f6c19 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1276,7 +1276,6 @@ static int __init ohci_hcd_mod_init(void) if (usb_disabled()) return -ENODEV; - printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name); pr_debug ("%s: block sizes: ed %zd td %zd\n", hcd_name, sizeof (struct ed), sizeof (struct td)); set_bit(USB_OHCI_LOADED, &usb_hcds_loaded); diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index 106a6bcefb08..5b32e683e367 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -275,8 +275,6 @@ static int __init ohci_nxp_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ohci_init_driver(&ohci_nxp_hc_driver, NULL); return platform_driver_register(&ohci_hcd_nxp_driver); } diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index f5bc9c8bdc9a..cb29701df911 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -423,8 +423,6 @@ static int __init ohci_omap_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ohci_init_driver(&ohci_omap_hc_driver, &omap_overrides); return platform_driver_register(&ohci_hcd_omap_driver); } diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 41efe927d8f3..d7b4f40f9ff4 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -282,7 +282,7 @@ MODULE_DEVICE_TABLE (pci, pci_ids); static int ohci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { - return usb_hcd_pci_probe(dev, id, &ohci_pci_hc_driver); + return usb_hcd_pci_probe(dev, &ohci_pci_hc_driver); } /* pci driver glue; this is a "new style" PCI driver module */ @@ -306,8 +306,6 @@ static int __init ohci_pci_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ohci_init_driver(&ohci_pci_hc_driver, &pci_overrides); #ifdef CONFIG_PM diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index 0adae6265127..a84305091c43 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -41,8 +41,6 @@ struct ohci_platform_priv { struct reset_control *resets; }; -static const char hcd_name[] = "ohci-platform"; - static int ohci_platform_power_on(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); @@ -289,7 +287,7 @@ static int ohci_platform_suspend(struct device *dev) return ret; } -static int ohci_platform_resume(struct device *dev) +static int ohci_platform_resume_common(struct device *dev, bool hibernated) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct usb_ohci_pdata *pdata = dev_get_platdata(dev); @@ -301,7 +299,7 @@ static int ohci_platform_resume(struct device *dev) return err; } - ohci_resume(hcd, false); + ohci_resume(hcd, hibernated); pm_runtime_disable(dev); pm_runtime_set_active(dev); @@ -309,6 +307,16 @@ static int ohci_platform_resume(struct device *dev) return 0; } + +static int ohci_platform_resume(struct device *dev) +{ + return ohci_platform_resume_common(dev, false); +} + +static int ohci_platform_restore(struct device *dev) +{ + return ohci_platform_resume_common(dev, true); +} #endif /* CONFIG_PM_SLEEP */ static const struct of_device_id ohci_platform_ids[] = { @@ -325,8 +333,16 @@ static const struct platform_device_id ohci_platform_table[] = { }; MODULE_DEVICE_TABLE(platform, ohci_platform_table); -static SIMPLE_DEV_PM_OPS(ohci_platform_pm_ops, ohci_platform_suspend, - ohci_platform_resume); +#ifdef CONFIG_PM_SLEEP +static const struct dev_pm_ops ohci_platform_pm_ops = { + .suspend = ohci_platform_suspend, + .resume = ohci_platform_resume, + .freeze = ohci_platform_suspend, + .thaw = ohci_platform_resume, + .poweroff = ohci_platform_suspend, + .restore = ohci_platform_restore, +}; +#endif static struct platform_driver ohci_platform_driver = { .id_table = ohci_platform_table, @@ -335,7 +351,9 @@ static struct platform_driver ohci_platform_driver = { .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "ohci-platform", +#ifdef CONFIG_PM_SLEEP .pm = &ohci_platform_pm_ops, +#endif .of_match_table = ohci_platform_ids, .probe_type = PROBE_PREFER_ASYNCHRONOUS, } @@ -346,8 +364,6 @@ static int __init ohci_platform_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ohci_init_driver(&ohci_platform_hc_driver, &platform_overrides); return platform_driver_register(&ohci_platform_driver); } diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index ab4f610a0140..a1dad8745622 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -114,8 +114,6 @@ #define PXA_UHC_MAX_PORTNUM 3 -static const char hcd_name[] = "ohci-pxa27x"; - static struct hc_driver __read_mostly ohci_pxa27x_hc_driver; struct pxa27x_ohci { @@ -608,8 +606,6 @@ static int __init ohci_pxa27x_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ohci_init_driver(&ohci_pxa27x_hc_driver, &pxa27x_overrides); ohci_pxa27x_hc_driver.hub_control = pxa27x_ohci_hub_control; diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 12264c048601..85a0a9ae0095 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -39,8 +39,6 @@ #define DRIVER_DESC "OHCI S3C2410 driver" -static const char hcd_name[] = "ohci-s3c2410"; - static struct clk *clk; static struct clk *usb_clk; @@ -474,7 +472,6 @@ static int __init ohci_s3c2410_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); ohci_init_driver(&ohci_s3c2410_hc_driver, NULL); /* diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c index 9b81f420656d..196951a27f3f 100644 --- a/drivers/usb/host/ohci-spear.c +++ b/drivers/usb/host/ohci-spear.c @@ -23,7 +23,6 @@ #define DRIVER_DESC "OHCI SPEAr driver" -static const char hcd_name[] = "SPEAr-ohci"; struct spear_ohci { struct clk *clk; }; @@ -179,8 +178,6 @@ static int __init ohci_spear_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ohci_init_driver(&ohci_spear_hc_driver, &spear_overrides); return platform_driver_register(&spear_ohci_hcd_driver); } diff --git a/drivers/usb/host/ohci-st.c b/drivers/usb/host/ohci-st.c index ac796ccd93ef..82eef3c62e11 100644 --- a/drivers/usb/host/ohci-st.c +++ b/drivers/usb/host/ohci-st.c @@ -40,8 +40,6 @@ struct st_ohci_platform_priv { #define hcd_to_ohci_priv(h) \ ((struct st_ohci_platform_priv *)hcd_to_ohci(h)->priv) -static const char hcd_name[] = "ohci-st"; - static int st_ohci_platform_power_on(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); @@ -324,8 +322,6 @@ static int __init ohci_platform_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ohci_init_driver(&ohci_platform_hc_driver, &platform_overrides); return platform_driver_register(&ohci_platform_driver); } diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index d879d6af5710..95240c9c45bd 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -3190,7 +3190,6 @@ static int __init u132_hcd_init(void) u132_exiting = 0; if (usb_disabled()) return -ENODEV; - printk(KERN_INFO "driver %s\n", hcd_name); workqueue = create_singlethread_workqueue("u132"); if (!workqueue) return -ENOMEM; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index d90b869f5f40..c22b51af83fc 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -867,8 +867,6 @@ static int __init uhci_hcd_init(void) if (usb_disabled()) return -ENODEV; - printk(KERN_INFO "uhci_hcd: " DRIVER_DESC "%s\n", - ignore_oc ? ", overcurrent ignored" : ""); set_bit(USB_UHCI_LOADED, &usb_hcds_loaded); #ifdef CONFIG_DYNAMIC_DEBUG diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c index 9b88745d247f..3592f757fe05 100644 --- a/drivers/usb/host/uhci-pci.c +++ b/drivers/usb/host/uhci-pci.c @@ -294,7 +294,7 @@ MODULE_DEVICE_TABLE(pci, uhci_pci_ids); static int uhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { - return usb_hcd_pci_probe(dev, id, &uhci_driver); + return usb_hcd_pci_probe(dev, &uhci_driver); } static struct pci_driver uhci_pci_driver = { diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index e61155fa6379..f1367b53b260 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -988,7 +988,7 @@ xhci_alloc_dbc(struct device *dev, void __iomem *base, const struct dbc_driver * dbc->driver = driver; if (readl(&dbc->regs->control) & DBC_CTRL_DBC_ENABLE) - return NULL; + goto err; INIT_DELAYED_WORK(&dbc->event_work, xhci_dbc_handle_events); spin_lock_init(&dbc->lock); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 8c19e151a945..9e56aa28efcd 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -641,7 +641,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, num_stream_ctxs, &stream_info->ctx_array_dma, mem_flags); if (!stream_info->stream_ctx_array) - goto cleanup_ctx; + goto cleanup_ring_array; memset(stream_info->stream_ctx_array, 0, sizeof(struct xhci_stream_ctx)*num_stream_ctxs); @@ -702,6 +702,11 @@ cleanup_rings: } xhci_free_command(xhci, stream_info->free_streams_command); cleanup_ctx: + xhci_free_stream_ctx(xhci, + stream_info->num_stream_ctxs, + stream_info->stream_ctx_array, + stream_info->ctx_array_dma); +cleanup_ring_array: kfree(stream_info->stream_rings); cleanup_info: kfree(stream_info); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index dce6c0ec8d34..40228a3d77a0 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -431,7 +431,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) * to say USB 2.0, but I'm not sure what the implications would be in * the other parts of the HCD code. */ - retval = usb_hcd_pci_probe(dev, id, &xhci_pci_hc_driver); + retval = usb_hcd_pci_probe(dev, &xhci_pci_hc_driver); if (retval) goto put_runtime_pm; diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index a8641b6536ee..5fb55bf19493 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -123,7 +123,7 @@ static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = { }; static const struct xhci_plat_priv xhci_plat_brcm = { - .quirks = XHCI_RESET_ON_RESUME, + .quirks = XHCI_RESET_ON_RESUME | XHCI_SUSPEND_RESUME_CLKS, }; static const struct of_device_id usb_xhci_of_match[] = { @@ -437,7 +437,16 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev) * xhci_suspend() needs `do_wakeup` to know whether host is allowed * to do wakeup during suspend. */ - return xhci_suspend(xhci, device_may_wakeup(dev)); + ret = xhci_suspend(xhci, device_may_wakeup(dev)); + if (ret) + return ret; + + if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) { + clk_disable_unprepare(xhci->clk); + clk_disable_unprepare(xhci->reg_clk); + } + + return 0; } static int __maybe_unused xhci_plat_resume(struct device *dev) @@ -446,6 +455,11 @@ static int __maybe_unused xhci_plat_resume(struct device *dev) struct xhci_hcd *xhci = hcd_to_xhci(hcd); int ret; + if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) { + clk_prepare_enable(xhci->clk); + clk_prepare_enable(xhci->reg_clk); + } + ret = xhci_priv_resume_quirk(hcd); if (ret) return ret; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 38649284ff88..5176765c4013 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1183,7 +1183,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* re-initialize the HC on Restore Error, or Host Controller Error */ if (temp & (STS_SRE | STS_HCE)) { reinit_xhc = true; - xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp); + if (!xhci->broken_suspend) + xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp); } if (reinit_xhc) { @@ -1482,7 +1483,7 @@ EXPORT_SYMBOL_GPL(xhci_get_endpoint_index); /* The reverse operation to xhci_get_endpoint_index. Calculate the USB endpoint * address from the XHCI endpoint index. */ -unsigned int xhci_get_endpoint_address(unsigned int ep_index) +static unsigned int xhci_get_endpoint_address(unsigned int ep_index) { unsigned int number = DIV_ROUND_UP(ep_index, 2); unsigned int direction = ep_index % 2 ? USB_DIR_OUT : USB_DIR_IN; @@ -4095,7 +4096,8 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) slot_id = command->slot_id; if (!slot_id || command->status != COMP_SUCCESS) { - xhci_err(xhci, "Error while assigning device slot ID\n"); + xhci_err(xhci, "Error while assigning device slot ID: %s\n", + xhci_trb_comp_code_string(command->status)); xhci_err(xhci, "Max number of devices this xHCI host supports is %u.\n", HCS_MAX_SLOTS( readl(&xhci->cap_regs->hcs_params1))); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 7caa0db5e826..c0964fe8ac12 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1807,8 +1807,6 @@ struct xhci_hcd { struct xhci_erst erst; /* Scratchpad */ struct xhci_scratchpad *scratchpad; - /* Store LPM test failed devices' information */ - struct list_head lpm_failed_devs; /* slot enabling and address device helpers */ /* these are not thread safe so use mutex */ @@ -1827,7 +1825,6 @@ struct xhci_hcd { /* Host controller watchdog timer structures */ unsigned int xhc_state; unsigned long run_graceperiod; - u32 command; struct s3_save s3; /* Host controller is dying - not responding to commands. "I'm not dead yet!" * @@ -1899,6 +1896,7 @@ struct xhci_hcd { #define XHCI_NO_SOFT_RETRY BIT_ULL(40) #define XHCI_BROKEN_D3COLD BIT_ULL(41) #define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42) +#define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43) unsigned int num_active_eps; unsigned int limit_active_eps; @@ -2041,7 +2039,6 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, struct usb_device *udev); unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc); -unsigned int xhci_get_endpoint_address(unsigned int ep_index); unsigned int xhci_last_valid_endpoint(u32 added_ctxs); void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep); void xhci_update_tt_active_eps(struct xhci_hcd *xhci, diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index e9437a176518..ea39243efee3 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -177,10 +177,6 @@ static int idmouse_create_image(struct usb_idmouse *dev) bytes_read += bulk_read; } - /* reset the device */ -reset: - ftip_command(dev, FTIP_RELEASE, 0, 0); - /* check for valid image */ /* right border should be black (0x00) */ for (bytes_read = sizeof(HEADER)-1 + WIDTH-1; bytes_read < IMGSIZE; bytes_read += WIDTH) @@ -192,6 +188,10 @@ reset: if (dev->bulk_in_buffer[bytes_read] != 0xFF) return -EAGAIN; + /* reset the device */ +reset: + ftip_command(dev, FTIP_RELEASE, 0, 0); + /* should be IMGSIZE == 65040 */ dev_dbg(&dev->interface->dev, "read %d bytes fingerprint data\n", bytes_read); diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c index 04c4e3fed094..54337d72bb9f 100644 --- a/drivers/usb/misc/usb251xb.c +++ b/drivers/usb/misc/usb251xb.c @@ -400,7 +400,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, { struct device *dev = hub->dev; struct device_node *np = dev->of_node; - int len, err; + int len; u32 property_u32 = 0; const char *cproperty_char; char str[USB251XB_STRING_BUFSIZE / 2]; @@ -416,13 +416,9 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, hub->skip_config = 0; hub->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); - if (PTR_ERR(hub->gpio_reset) == -EPROBE_DEFER) { - return -EPROBE_DEFER; - } else if (IS_ERR(hub->gpio_reset)) { - err = PTR_ERR(hub->gpio_reset); - dev_err(dev, "unable to request GPIO reset pin (%d)\n", err); - return err; - } + if (IS_ERR(hub->gpio_reset)) + return dev_err_probe(dev, PTR_ERR(hub->gpio_reset), + "unable to request GPIO reset pin\n"); if (of_property_read_u16_array(np, "vendor-id", &hub->vendor_id, 1)) hub->vendor_id = USB251XB_DEF_VENDOR_ID; @@ -547,7 +543,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, hub->boost_up = USB251XB_DEF_BOOST_UP; cproperty_char = of_get_property(np, "manufacturer", NULL); - strlcpy(str, cproperty_char ? : USB251XB_DEF_MANUFACTURER_STRING, + strscpy(str, cproperty_char ? : USB251XB_DEF_MANUFACTURER_STRING, sizeof(str)); hub->manufacturer_len = strlen(str) & 0xFF; memset(hub->manufacturer, 0, USB251XB_STRING_BUFSIZE); @@ -557,7 +553,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, USB251XB_STRING_BUFSIZE); cproperty_char = of_get_property(np, "product", NULL); - strlcpy(str, cproperty_char ? : data->product_str, sizeof(str)); + strscpy(str, cproperty_char ? : data->product_str, sizeof(str)); hub->product_len = strlen(str) & 0xFF; memset(hub->product, 0, USB251XB_STRING_BUFSIZE); len = min_t(size_t, USB251XB_STRING_BUFSIZE / 2, strlen(str)); @@ -566,7 +562,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, USB251XB_STRING_BUFSIZE); cproperty_char = of_get_property(np, "serial", NULL); - strlcpy(str, cproperty_char ? : USB251XB_DEF_SERIAL_STRING, + strscpy(str, cproperty_char ? : USB251XB_DEF_SERIAL_STRING, sizeof(str)); hub->serial_len = strlen(str) & 0xFF; memset(hub->serial, 0, USB251XB_STRING_BUFSIZE); diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c index 3c9fa663475f..c70ca475c7c7 100644 --- a/drivers/usb/misc/usb3503.c +++ b/drivers/usb/misc/usb3503.c @@ -160,6 +160,7 @@ static int usb3503_probe(struct usb3503 *hub) struct usb3503_platform_data *pdata = dev_get_platdata(dev); struct device_node *np = dev->of_node; int err; + bool is_clk_enabled = false; u32 mode = USB3503_MODE_HUB; const u32 *property; enum gpiod_flags flags; @@ -217,6 +218,7 @@ static int usb3503_probe(struct usb3503 *hub) return err; } + is_clk_enabled = true; property = of_get_property(np, "disabled-ports", &len); if (property && (len / sizeof(u32)) > 0) { int i; @@ -236,20 +238,26 @@ static int usb3503_probe(struct usb3503 *hub) else flags = GPIOD_OUT_HIGH; hub->intn = devm_gpiod_get_optional(dev, "intn", flags); - if (IS_ERR(hub->intn)) - return PTR_ERR(hub->intn); + if (IS_ERR(hub->intn)) { + err = PTR_ERR(hub->intn); + goto err_clk; + } if (hub->intn) gpiod_set_consumer_name(hub->intn, "usb3503 intn"); hub->connect = devm_gpiod_get_optional(dev, "connect", GPIOD_OUT_LOW); - if (IS_ERR(hub->connect)) - return PTR_ERR(hub->connect); + if (IS_ERR(hub->connect)) { + err = PTR_ERR(hub->connect); + goto err_clk; + } if (hub->connect) gpiod_set_consumer_name(hub->connect, "usb3503 connect"); hub->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); - if (IS_ERR(hub->reset)) - return PTR_ERR(hub->reset); + if (IS_ERR(hub->reset)) { + err = PTR_ERR(hub->reset); + goto err_clk; + } if (hub->reset) { /* Datasheet defines a hardware reset to be at least 100us */ usleep_range(100, 10000); @@ -265,6 +273,11 @@ static int usb3503_probe(struct usb3503 *hub) (hub->mode == USB3503_MODE_HUB) ? "hub" : "standby"); return 0; + +err_clk: + if (is_clk_enabled) + clk_disable_unprepare(hub->clk); + return err; } static int usb3503_i2c_probe(struct i2c_client *i2c, diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 0be8efcda15d..b00d92db5dfd 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -502,7 +502,7 @@ static size_t parport_uss720_epp_write_data(struct parport *pp, const void *buf, #else struct parport_uss720_private *priv = pp->private_data; struct usb_device *usbdev = priv->usbdev; - int rlen; + int rlen = 0; int i; if (!usbdev) @@ -563,7 +563,7 @@ static size_t parport_uss720_ecp_write_data(struct parport *pp, const void *buff { struct parport_uss720_private *priv = pp->private_data; struct usb_device *usbdev = priv->usbdev; - int rlen; + int rlen = 0; int i; if (!usbdev) @@ -581,7 +581,7 @@ static size_t parport_uss720_ecp_read_data(struct parport *pp, void *buffer, siz { struct parport_uss720_private *priv = pp->private_data; struct usb_device *usbdev = priv->usbdev; - int rlen; + int rlen = 0; int i; if (!usbdev) @@ -614,7 +614,7 @@ static size_t parport_uss720_write_compat(struct parport *pp, const void *buffer { struct parport_uss720_private *priv = pp->private_data; struct usb_device *usbdev = priv->usbdev; - int rlen; + int rlen = 0; int i; if (!usbdev) diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index f48a23adbc35..094e812e9e69 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -1268,6 +1268,11 @@ static int mon_bin_mmap(struct file *filp, struct vm_area_struct *vma) { /* don't do anything here: "fault" will set up page table entries */ vma->vm_ops = &mon_bin_vm_ops; + + if (vma->vm_flags & VM_WRITE) + return -EPERM; + + vma->vm_flags &= ~VM_MAYWRITE; vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP; vma->vm_private_data = filp->private_data; mon_bin_vma_open(vma); diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c index 0ca173af87bb..a3a6282893d0 100644 --- a/drivers/usb/mtu3/mtu3_core.c +++ b/drivers/usb/mtu3/mtu3_core.c @@ -978,8 +978,6 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb) goto irq_err; } - device_init_wakeup(dev, true); - /* power down device IP for power saving by default */ mtu3_stop(mtu); diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c index 4cb65346789d..d78ae52b4e26 100644 --- a/drivers/usb/mtu3/mtu3_plat.c +++ b/drivers/usb/mtu3/mtu3_plat.c @@ -356,6 +356,8 @@ static int mtu3_probe(struct platform_device *pdev) pm_runtime_enable(dev); pm_runtime_get_sync(dev); + device_init_wakeup(dev, true); + ret = ssusb_rscs_init(ssusb); if (ret) goto comm_init_err; diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index fd4ae2dd24e5..a4e55b0c52cf 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -523,11 +523,9 @@ static int da8xx_probe(struct platform_device *pdev) } glue->phy = devm_phy_get(&pdev->dev, "usb-phy"); - if (IS_ERR(glue->phy)) { - if (PTR_ERR(glue->phy) != -EPROBE_DEFER) - dev_err(&pdev->dev, "failed to get phy\n"); - return PTR_ERR(glue->phy); - } + if (IS_ERR(glue->phy)) + return dev_err_probe(&pdev->dev, PTR_ERR(glue->phy), + "failed to get phy\n"); glue->dev = &pdev->dev; glue->clk = clk; diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c index 417c30bff9ca..d1e4e0deb753 100644 --- a/drivers/usb/musb/jz4740.c +++ b/drivers/usb/musb/jz4740.c @@ -105,7 +105,6 @@ static int jz4740_musb_init(struct musb *musb) .driver_data = glue, .fwnode = dev_fwnode(dev), }; - int err; glue->musb = musb; @@ -113,12 +112,9 @@ static int jz4740_musb_init(struct musb *musb) musb->xceiv = devm_usb_get_phy_by_phandle(dev, "phys", 0); else musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); - if (IS_ERR(musb->xceiv)) { - err = PTR_ERR(musb->xceiv); - if (err != -EPROBE_DEFER) - dev_err(dev, "No transceiver configured: %d\n", err); - return err; - } + if (IS_ERR(musb->xceiv)) + return dev_err_probe(dev, PTR_ERR(musb->xceiv), + "No transceiver configured\n"); glue->role_sw = usb_role_switch_register(dev, &role_sw_desc); if (IS_ERR(glue->role_sw)) { diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index bbbcfd49fb35..03027c6fa3ab 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2595,9 +2595,7 @@ fail2: musb_platform_exit(musb); fail1: - if (status != -EPROBE_DEFER) - dev_err(musb->controller, - "%s failed with status %d\n", __func__, status); + dev_err_probe(musb->controller, status, "%s failed\n", __func__); musb_free(musb); diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index c963cb8565f2..9589243e8951 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -718,10 +718,8 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller) dc = dma_request_chan(dev->parent, str); if (IS_ERR(dc)) { - ret = PTR_ERR(dc); - if (ret != -EPROBE_DEFER) - dev_err(dev, "Failed to request %s: %d.\n", - str, ret); + ret = dev_err_probe(dev, PTR_ERR(dc), + "Failed to request %s.\n", str); goto err; } diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index daada4b66a92..6704a62a1665 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -760,6 +760,9 @@ static void rxstate(struct musb *musb, struct musb_request *req) musb_writew(epio, MUSB_RXCSR, csr); buffer_aint_mapped: + fifo_count = min_t(unsigned int, + request->length - request->actual, + (unsigned int)fifo_count); musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *) (request->buf + request->actual)); request->actual += fifo_count; diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index 961c858fb349..7f9a999cd5ff 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -743,31 +743,20 @@ static int sunxi_musb_probe(struct platform_device *pdev) if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) { glue->rst = devm_reset_control_get(&pdev->dev, NULL); - if (IS_ERR(glue->rst)) { - if (PTR_ERR(glue->rst) == -EPROBE_DEFER) - return -EPROBE_DEFER; - dev_err(&pdev->dev, "Error getting reset %ld\n", - PTR_ERR(glue->rst)); - return PTR_ERR(glue->rst); - } + if (IS_ERR(glue->rst)) + return dev_err_probe(&pdev->dev, PTR_ERR(glue->rst), + "Error getting reset\n"); } glue->extcon = extcon_get_edev_by_phandle(&pdev->dev, 0); - if (IS_ERR(glue->extcon)) { - if (PTR_ERR(glue->extcon) == -EPROBE_DEFER) - return -EPROBE_DEFER; - dev_err(&pdev->dev, "Invalid or missing extcon\n"); - return PTR_ERR(glue->extcon); - } + if (IS_ERR(glue->extcon)) + return dev_err_probe(&pdev->dev, PTR_ERR(glue->extcon), + "Invalid or missing extcon\n"); glue->phy = devm_phy_get(&pdev->dev, "usb"); - if (IS_ERR(glue->phy)) { - if (PTR_ERR(glue->phy) == -EPROBE_DEFER) - return -EPROBE_DEFER; - dev_err(&pdev->dev, "Error getting phy %ld\n", - PTR_ERR(glue->phy)); - return PTR_ERR(glue->phy); - } + if (IS_ERR(glue->phy)) + return dev_err_probe(&pdev->dev, PTR_ERR(glue->phy), + "Error getting phy\n"); glue->usb_phy = usb_phy_generic_register(); if (IS_ERR(glue->usb_phy)) { diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 34b9f8140187..3dc5c04e7cbf 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -230,12 +230,9 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop) err = PTR_ERR_OR_ZERO(nop->gpiod_vbus); } - if (err == -EPROBE_DEFER) - return -EPROBE_DEFER; - if (err) { - dev_err(dev, "Error requesting RESET or VBUS GPIO\n"); - return err; - } + if (err) + return dev_err_probe(dev, err, + "Error requesting RESET or VBUS GPIO\n"); if (nop->gpiod_reset) gpiod_direction_output(nop->gpiod_reset, 1); diff --git a/drivers/usb/phy/phy-jz4770.c b/drivers/usb/phy/phy-jz4770.c index 4025da20b3fd..f16adcacdce3 100644 --- a/drivers/usb/phy/phy-jz4770.c +++ b/drivers/usb/phy/phy-jz4770.c @@ -321,27 +321,18 @@ static int jz4770_phy_probe(struct platform_device *pdev) } priv->clk = devm_clk_get(dev, NULL); - if (IS_ERR(priv->clk)) { - err = PTR_ERR(priv->clk); - if (err != -EPROBE_DEFER) - dev_err(dev, "Failed to get clock\n"); - return err; - } + if (IS_ERR(priv->clk)) + return dev_err_probe(dev, PTR_ERR(priv->clk), + "Failed to get clock\n"); priv->vcc_supply = devm_regulator_get(dev, "vcc"); - if (IS_ERR(priv->vcc_supply)) { - err = PTR_ERR(priv->vcc_supply); - if (err != -EPROBE_DEFER) - dev_err(dev, "Failed to get regulator\n"); - return err; - } + if (IS_ERR(priv->vcc_supply)) + return dev_err_probe(dev, PTR_ERR(priv->vcc_supply), + "Failed to get regulator\n"); err = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2); - if (err) { - if (err != -EPROBE_DEFER) - dev_err(dev, "Unable to register PHY\n"); - return err; - } + if (err) + return dev_err_probe(dev, err, "Unable to register PHY\n"); return devm_add_action_or_reset(dev, ingenic_usb_phy_remove, &priv->phy); } diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 8a262c5a0408..d2836ef5d15c 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -144,8 +144,8 @@ #define MXS_PHY_NEED_IP_FIX BIT(3) /* Minimum and maximum values for device tree entries */ -#define MXS_PHY_TX_CAL45_MIN 30 -#define MXS_PHY_TX_CAL45_MAX 55 +#define MXS_PHY_TX_CAL45_MIN 35 +#define MXS_PHY_TX_CAL45_MAX 54 #define MXS_PHY_TX_D_CAL_MIN 79 #define MXS_PHY_TX_D_CAL_MAX 119 diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c index 68cd4b68e3a2..f0240107edb1 100644 --- a/drivers/usb/phy/phy-tegra-usb.c +++ b/drivers/usb/phy/phy-tegra-usb.c @@ -1440,16 +1440,22 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) return err; } - gpiod = devm_gpiod_get_from_of_node(&pdev->dev, np, - "nvidia,phy-reset-gpio", - 0, GPIOD_OUT_HIGH, - "ulpi_phy_reset_b"); + gpiod = devm_gpiod_get(&pdev->dev, "nvidia,phy-reset", + GPIOD_OUT_HIGH); err = PTR_ERR_OR_ZERO(gpiod); if (err) { dev_err(&pdev->dev, "Request failed for reset GPIO: %d\n", err); return err; } + + err = gpiod_set_consumer_name(gpiod, "ulpi_phy_reset_b"); + if (err) { + dev_err(&pdev->dev, + "Failed to set up reset GPIO name: %d\n", err); + return err; + } + tegra_phy->reset_gpio = gpiod; phy = devm_otg_ulpi_create(&pdev->dev, diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index b97aa40ca4d1..da19a5fa414f 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -189,8 +189,8 @@ static int usb_console_setup(struct console *co, char *options) info->port = NULL; usb_autopm_put_interface(serial->interface); error_get_interface: - usb_serial_put(serial); mutex_unlock(&serial->disc_mutex); + usb_serial_put(serial); return retval; } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 0a1da579ead5..05e28a5ce42b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -47,10 +47,27 @@ #define DRIVER_AUTHOR "Greg Kroah-Hartman , Bill Ryder , Kuba Ober , Andreas Mohr, Johan Hovold " #define DRIVER_DESC "USB FTDI Serial Converters Driver" +enum ftdi_chip_type { + SIO, + FT232A, + FT232B, + FT2232C, + FT232R, + FT232H, + FT2232H, + FT4232H, + FT4232HA, + FT232HP, + FT233HP, + FT2232HP, + FT2233HP, + FT4232HP, + FT4233HP, + FTX, +}; struct ftdi_private { enum ftdi_chip_type chip_type; - /* type of device, either SIO or FT8U232AM */ int baud_base; /* baud base clock for divisor setting */ int custom_divisor; /* custom_divisor kludge, this is for baud_base (different from what goes to the @@ -62,8 +79,7 @@ struct ftdi_private { unsigned long last_dtr_rts; /* saved modem control outputs */ char prev_status; /* Used for TIOCMIWAIT */ char transmit_empty; /* If transmitter is empty or not */ - u16 interface; /* FT2232C, FT2232H or FT4232H port interface - (0 for FT232/245) */ + u16 channel; /* channel index, or 0 for legacy types */ speed_t force_baud; /* if non-zero, force the baud rate to this value */ @@ -84,8 +100,7 @@ struct ftdi_private { #endif }; -/* struct ftdi_sio_quirk is used by devices requiring special attention. */ -struct ftdi_sio_quirk { +struct ftdi_quirk { int (*probe)(struct usb_serial *); /* Special settings for probed ports. */ void (*port_probe)(struct ftdi_private *); @@ -98,27 +113,27 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial); static void ftdi_USB_UIRT_setup(struct ftdi_private *priv); static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv); -static const struct ftdi_sio_quirk ftdi_jtag_quirk = { +static const struct ftdi_quirk ftdi_jtag_quirk = { .probe = ftdi_jtag_probe, }; -static const struct ftdi_sio_quirk ftdi_NDI_device_quirk = { +static const struct ftdi_quirk ftdi_NDI_device_quirk = { .probe = ftdi_NDI_device_setup, }; -static const struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = { +static const struct ftdi_quirk ftdi_USB_UIRT_quirk = { .port_probe = ftdi_USB_UIRT_setup, }; -static const struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { +static const struct ftdi_quirk ftdi_HE_TIRA1_quirk = { .port_probe = ftdi_HE_TIRA1_setup, }; -static const struct ftdi_sio_quirk ftdi_stmclite_quirk = { +static const struct ftdi_quirk ftdi_stmclite_quirk = { .probe = ftdi_stmclite_probe, }; -static const struct ftdi_sio_quirk ftdi_8u2232c_quirk = { +static const struct ftdi_quirk ftdi_8u2232c_quirk = { .probe = ftdi_8u2232c_probe, }; @@ -180,6 +195,13 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) }, { USB_DEVICE(FTDI_VID, FTDI_232H_PID) }, { USB_DEVICE(FTDI_VID, FTDI_FTX_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_FT2233HP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_FT4233HP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_FT2232HP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_FT4232HP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_FT233HP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_FT232HP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_FT4232HA_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) }, @@ -1061,15 +1083,22 @@ static const struct usb_device_id id_table_combined[] = { MODULE_DEVICE_TABLE(usb, id_table_combined); static const char *ftdi_chip_name[] = { - [SIO] = "SIO", /* the serial part of FT8U100AX */ - [FT8U232AM] = "FT8U232AM", - [FT232BM] = "FT232BM", - [FT2232C] = "FT2232C", - [FT232RL] = "FT232RL", - [FT2232H] = "FT2232H", - [FT4232H] = "FT4232H", - [FT232H] = "FT232H", - [FTX] = "FT-X" + [SIO] = "SIO", /* the serial part of FT8U100AX */ + [FT232A] = "FT232A", + [FT232B] = "FT232B", + [FT2232C] = "FT2232C/D", + [FT232R] = "FT232R", + [FT232H] = "FT232H", + [FT2232H] = "FT2232H", + [FT4232H] = "FT4232H", + [FT4232HA] = "FT4232HA", + [FT232HP] = "FT232HP", + [FT233HP] = "FT233HP", + [FT2232HP] = "FT2232HP", + [FT2233HP] = "FT2233HP", + [FT4232HP] = "FT4232HP", + [FT4233HP] = "FT4233HP", + [FTX] = "FT-X", }; @@ -1078,75 +1107,12 @@ static const char *ftdi_chip_name[] = { #define FTDI_STATUS_B1_MASK (FTDI_RS_BI) /* End TIOCMIWAIT */ -/* function prototypes for a FTDI serial converter */ -static int ftdi_sio_probe(struct usb_serial *serial, - const struct usb_device_id *id); -static int ftdi_sio_port_probe(struct usb_serial_port *port); -static void ftdi_sio_port_remove(struct usb_serial_port *port); -static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port); -static void ftdi_dtr_rts(struct usb_serial_port *port, int on); -static void ftdi_process_read_urb(struct urb *urb); -static int ftdi_prepare_write_buffer(struct usb_serial_port *port, - void *dest, size_t size); static void ftdi_set_termios(struct tty_struct *tty, struct usb_serial_port *port, const struct ktermios *old_termios); -static int ftdi_tiocmget(struct tty_struct *tty); -static int ftdi_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear); -static int ftdi_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg); -static void get_serial_info(struct tty_struct *tty, struct serial_struct *ss); -static int set_serial_info(struct tty_struct *tty, - struct serial_struct *ss); -static void ftdi_break_ctl(struct tty_struct *tty, int break_state); -static bool ftdi_tx_empty(struct usb_serial_port *port); static int ftdi_get_modem_status(struct usb_serial_port *port, unsigned char status[2]); -static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base); -static unsigned short int ftdi_232am_baud_to_divisor(int baud); -static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base); -static u32 ftdi_232bm_baud_to_divisor(int baud); -static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base); -static u32 ftdi_2232h_baud_to_divisor(int baud); - -static struct usb_serial_driver ftdi_sio_device = { - .driver = { - .owner = THIS_MODULE, - .name = "ftdi_sio", - }, - .description = "FTDI USB Serial Device", - .id_table = id_table_combined, - .num_ports = 1, - .bulk_in_size = 512, - .bulk_out_size = 256, - .probe = ftdi_sio_probe, - .port_probe = ftdi_sio_port_probe, - .port_remove = ftdi_sio_port_remove, - .open = ftdi_open, - .dtr_rts = ftdi_dtr_rts, - .throttle = usb_serial_generic_throttle, - .unthrottle = usb_serial_generic_unthrottle, - .process_read_urb = ftdi_process_read_urb, - .prepare_write_buffer = ftdi_prepare_write_buffer, - .tiocmget = ftdi_tiocmget, - .tiocmset = ftdi_tiocmset, - .tiocmiwait = usb_serial_generic_tiocmiwait, - .get_icount = usb_serial_generic_get_icount, - .ioctl = ftdi_ioctl, - .get_serial = get_serial_info, - .set_serial = set_serial_info, - .set_termios = ftdi_set_termios, - .break_ctl = ftdi_break_ctl, - .tx_empty = ftdi_tx_empty, -}; - -static struct usb_serial_driver * const serial_drivers[] = { - &ftdi_sio_device, NULL -}; - - #define WDR_TIMEOUT 5000 /* default urb timeout */ #define WDR_SHORT_TIMEOUT 1000 /* shorter urb timeout */ @@ -1262,7 +1228,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_MODEM_CTRL_REQUEST, FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE, - value, priv->interface, + value, priv->channel, NULL, 0, WDR_TIMEOUT); if (rv < 0) { dev_dbg(dev, "%s Error from MODEM_CTRL urb: DTR %s, RTS %s\n", @@ -1308,7 +1274,7 @@ static u32 get_ftdi_divisor(struct tty_struct *tty, if (!baud) baud = 9600; switch (priv->chip_type) { - case SIO: /* SIO chip */ + case SIO: switch (baud) { case 300: div_value = ftdi_sio_b300; break; case 600: div_value = ftdi_sio_b600; break; @@ -1320,8 +1286,7 @@ static u32 get_ftdi_divisor(struct tty_struct *tty, case 38400: div_value = ftdi_sio_b38400; break; case 57600: div_value = ftdi_sio_b57600; break; case 115200: div_value = ftdi_sio_b115200; break; - } /* baud */ - if (div_value == 0) { + default: dev_dbg(dev, "%s - Baudrate (%d) requested is not supported\n", __func__, baud); div_value = ftdi_sio_b9600; @@ -1329,7 +1294,7 @@ static u32 get_ftdi_divisor(struct tty_struct *tty, div_okay = 0; } break; - case FT8U232AM: /* 8U232AM chip */ + case FT232A: if (baud <= 3000000) { div_value = ftdi_232am_baud_to_divisor(baud); } else { @@ -1339,10 +1304,10 @@ static u32 get_ftdi_divisor(struct tty_struct *tty, div_okay = 0; } break; - case FT232BM: /* FT232BM chip */ - case FT2232C: /* FT2232C chip */ - case FT232RL: /* FT232RL chip */ - case FTX: /* FT-X series */ + case FT232B: + case FT2232C: + case FT232R: + case FTX: if (baud <= 3000000) { u16 product_id = le16_to_cpu( port->serial->dev->descriptor.idProduct); @@ -1362,9 +1327,7 @@ static u32 get_ftdi_divisor(struct tty_struct *tty, baud = 9600; } break; - case FT2232H: /* FT2232H chip */ - case FT4232H: /* FT4232H chip */ - case FT232H: /* FT232H chip */ + default: if ((baud <= 12000000) && (baud >= 1200)) { div_value = ftdi_2232h_baud_to_divisor(baud); } else if (baud < 1200) { @@ -1376,7 +1339,7 @@ static u32 get_ftdi_divisor(struct tty_struct *tty, baud = 9600; } break; - } /* priv->chip_type */ + } if (div_okay) { dev_dbg(dev, "%s - Baud rate set to %d (divisor 0x%lX) on chip %s\n", @@ -1399,13 +1362,8 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) index_value = get_ftdi_divisor(tty, port); value = (u16)index_value; index = (u16)(index_value >> 16); - if (priv->chip_type == FT2232C || priv->chip_type == FT2232H || - priv->chip_type == FT4232H || priv->chip_type == FT232H || - priv->chip_type == FTX) { - /* Probably the BM type needs the MSB of the encoded fractional - * divider also moved like for the chips above. Any infos? */ - index = (u16)((index << 8) | priv->interface); - } + if (priv->channel) + index = (u16)((index << 8) | priv->channel); rv = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), @@ -1423,7 +1381,7 @@ static int write_latency_timer(struct usb_serial_port *port) int rv; int l = priv->latency; - if (priv->chip_type == SIO || priv->chip_type == FT8U232AM) + if (priv->chip_type == SIO || priv->chip_type == FT232A) return -EINVAL; if (priv->flags & ASYNC_LOW_LATENCY) @@ -1435,7 +1393,7 @@ static int write_latency_timer(struct usb_serial_port *port) usb_sndctrlpipe(udev, 0), FTDI_SIO_SET_LATENCY_TIMER_REQUEST, FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, - l, priv->interface, + l, priv->channel, NULL, 0, WDR_TIMEOUT); if (rv < 0) dev_err(&port->dev, "Unable to write latency timer: %i\n", rv); @@ -1451,7 +1409,7 @@ static int _read_latency_timer(struct usb_serial_port *port) rv = usb_control_msg_recv(udev, 0, FTDI_SIO_GET_LATENCY_TIMER_REQUEST, FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, 0, - priv->interface, &buf, 1, WDR_TIMEOUT, + priv->channel, &buf, 1, WDR_TIMEOUT, GFP_KERNEL); if (rv == 0) rv = buf; @@ -1464,7 +1422,7 @@ static int read_latency_timer(struct usb_serial_port *port) struct ftdi_private *priv = usb_get_serial_port_data(port); int rv; - if (priv->chip_type == SIO || priv->chip_type == FT8U232AM) + if (priv->chip_type == SIO || priv->chip_type == FT232A) return -EINVAL; rv = _read_latency_timer(port); @@ -1539,90 +1497,97 @@ static int get_lsr_info(struct usb_serial_port *port, return 0; } - -/* Determine type of FTDI chip based on USB config and descriptor. */ -static void ftdi_determine_type(struct usb_serial_port *port) +static int ftdi_determine_type(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); struct usb_serial *serial = port->serial; struct usb_device *udev = serial->dev; - unsigned version; - unsigned interfaces; - - /* Assume it is not the original SIO device for now. */ - priv->baud_base = 48000000 / 2; + unsigned int version, ifnum; version = le16_to_cpu(udev->descriptor.bcdDevice); - interfaces = udev->actconfig->desc.bNumInterfaces; - dev_dbg(&port->dev, "%s: bcdDevice = 0x%x, bNumInterfaces = %u\n", __func__, - version, interfaces); - if (interfaces > 1) { - struct usb_interface *intf = serial->interface; - int ifnum = intf->cur_altsetting->desc.bInterfaceNumber; + ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber; - /* Multiple interfaces.*/ - if (version == 0x0800) { - priv->chip_type = FT4232H; - /* Hi-speed - baud clock runs at 120MHz */ - priv->baud_base = 120000000 / 2; - } else if (version == 0x0700) { - priv->chip_type = FT2232H; - /* Hi-speed - baud clock runs at 120MHz */ - priv->baud_base = 120000000 / 2; - } else - priv->chip_type = FT2232C; + /* Assume Hi-Speed type */ + priv->baud_base = 120000000 / 2; + priv->channel = CHANNEL_A + ifnum; - /* Determine interface code. */ - if (ifnum == 0) - priv->interface = INTERFACE_A; - else if (ifnum == 1) - priv->interface = INTERFACE_B; - else if (ifnum == 2) - priv->interface = INTERFACE_C; - else if (ifnum == 3) - priv->interface = INTERFACE_D; - - /* BM-type devices have a bug where bcdDevice gets set - * to 0x200 when iSerialNumber is 0. */ - if (version < 0x500) { - dev_dbg(&port->dev, - "%s: something fishy - bcdDevice too low for multi-interface device\n", - __func__); - } - } else if (version < 0x200) { - /* Old device. Assume it's the original SIO. */ - priv->chip_type = SIO; - priv->baud_base = 12000000 / 16; - } else if (version < 0x400) { - /* Assume it's an FT8U232AM (or FT8U245AM) */ - priv->chip_type = FT8U232AM; + switch (version) { + case 0x200: + priv->chip_type = FT232A; + priv->baud_base = 48000000 / 2; + priv->channel = 0; /* - * It might be a BM type because of the iSerialNumber bug. - * If iSerialNumber==0 and the latency timer is readable, - * assume it is BM type. + * FT232B devices have a bug where bcdDevice gets set to 0x200 + * when iSerialNumber is 0. Assume it is an FT232B in case the + * latency timer is readable. */ if (udev->descriptor.iSerialNumber == 0 && _read_latency_timer(port) >= 0) { - dev_dbg(&port->dev, - "%s: has latency timer so not an AM type\n", - __func__); - priv->chip_type = FT232BM; + priv->chip_type = FT232B; } - } else if (version < 0x600) { - /* Assume it's an FT232BM (or FT245BM) */ - priv->chip_type = FT232BM; - } else if (version < 0x900) { - /* Assume it's an FT232RL */ - priv->chip_type = FT232RL; - } else if (version < 0x1000) { - /* Assume it's an FT232H */ + break; + case 0x400: + priv->chip_type = FT232B; + priv->baud_base = 48000000 / 2; + priv->channel = 0; + break; + case 0x500: + priv->chip_type = FT2232C; + priv->baud_base = 48000000 / 2; + break; + case 0x600: + priv->chip_type = FT232R; + priv->baud_base = 48000000 / 2; + priv->channel = 0; + break; + case 0x700: + priv->chip_type = FT2232H; + break; + case 0x800: + priv->chip_type = FT4232H; + break; + case 0x900: priv->chip_type = FT232H; - } else { - /* Assume it's an FT-X series device */ + break; + case 0x1000: priv->chip_type = FTX; + priv->baud_base = 48000000 / 2; + break; + case 0x2800: + priv->chip_type = FT2233HP; + break; + case 0x2900: + priv->chip_type = FT4233HP; + break; + case 0x3000: + priv->chip_type = FT2232HP; + break; + case 0x3100: + priv->chip_type = FT4232HP; + break; + case 0x3200: + priv->chip_type = FT233HP; + break; + case 0x3300: + priv->chip_type = FT232HP; + break; + case 0x3600: + priv->chip_type = FT4232HA; + break; + default: + if (version < 0x200) { + priv->chip_type = SIO; + priv->baud_base = 12000000 / 16; + priv->channel = 0; + } else { + dev_err(&port->dev, "unknown device type: 0x%02x\n", version); + return -ENODEV; + } } dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]); + + return 0; } @@ -1721,7 +1686,7 @@ static ssize_t event_char_store(struct device *dev, usb_sndctrlpipe(udev, 0), FTDI_SIO_SET_EVENT_CHAR_REQUEST, FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE, - v, priv->interface, + v, priv->channel, NULL, 0, WDR_TIMEOUT); if (rv < 0) { dev_dbg(&port->dev, "Unable to write event character: %i\n", rv); @@ -1732,51 +1697,42 @@ static ssize_t event_char_store(struct device *dev, } static DEVICE_ATTR_WO(event_char); -static int create_sysfs_attrs(struct usb_serial_port *port) +static struct attribute *ftdi_attrs[] = { + &dev_attr_event_char.attr, + &dev_attr_latency_timer.attr, + NULL +}; + +static umode_t ftdi_is_visible(struct kobject *kobj, struct attribute *attr, int idx) { + struct device *dev = kobj_to_dev(kobj); + struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); - int retval = 0; + enum ftdi_chip_type type = priv->chip_type; - /* XXX I've no idea if the original SIO supports the event_char - * sysfs parameter, so I'm playing it safe. */ - if (priv->chip_type != SIO) { - dev_dbg(&port->dev, "sysfs attributes for %s\n", ftdi_chip_name[priv->chip_type]); - retval = device_create_file(&port->dev, &dev_attr_event_char); - if ((!retval) && - (priv->chip_type == FT232BM || - priv->chip_type == FT2232C || - priv->chip_type == FT232RL || - priv->chip_type == FT2232H || - priv->chip_type == FT4232H || - priv->chip_type == FT232H || - priv->chip_type == FTX)) { - retval = device_create_file(&port->dev, - &dev_attr_latency_timer); - } - } - return retval; -} - -static void remove_sysfs_attrs(struct usb_serial_port *port) -{ - struct ftdi_private *priv = usb_get_serial_port_data(port); - - /* XXX see create_sysfs_attrs */ - if (priv->chip_type != SIO) { - device_remove_file(&port->dev, &dev_attr_event_char); - if (priv->chip_type == FT232BM || - priv->chip_type == FT2232C || - priv->chip_type == FT232RL || - priv->chip_type == FT2232H || - priv->chip_type == FT4232H || - priv->chip_type == FT232H || - priv->chip_type == FTX) { - device_remove_file(&port->dev, &dev_attr_latency_timer); - } + if (attr == &dev_attr_event_char.attr) { + if (type == SIO) + return 0; } + if (attr == &dev_attr_latency_timer.attr) { + if (type == SIO || type == FT232A) + return 0; + } + + return attr->mode; } +static const struct attribute_group ftdi_group = { + .attrs = ftdi_attrs, + .is_visible = ftdi_is_visible, +}; + +static const struct attribute_group *ftdi_groups[] = { + &ftdi_group, + NULL +}; + #ifdef CONFIG_GPIOLIB static int ftdi_set_bitmode(struct usb_serial_port *port, u8 mode) @@ -1795,7 +1751,7 @@ static int ftdi_set_bitmode(struct usb_serial_port *port, u8 mode) usb_sndctrlpipe(serial->dev, 0), FTDI_SIO_SET_BITMODE_REQUEST, FTDI_SIO_SET_BITMODE_REQUEST_TYPE, val, - priv->interface, NULL, 0, WDR_TIMEOUT); + priv->channel, NULL, 0, WDR_TIMEOUT); if (result < 0) { dev_err(&serial->interface->dev, "bitmode request failed for value 0x%04x: %d\n", @@ -1859,7 +1815,7 @@ static int ftdi_read_cbus_pins(struct usb_serial_port *port) result = usb_control_msg_recv(serial->dev, 0, FTDI_SIO_READ_PINS_REQUEST, FTDI_SIO_READ_PINS_REQUEST_TYPE, 0, - priv->interface, &buf, 1, WDR_TIMEOUT, + priv->channel, &buf, 1, WDR_TIMEOUT, GFP_KERNEL); if (result == 0) result = buf; @@ -2144,7 +2100,7 @@ static int ftdi_gpio_init(struct usb_serial_port *port) case FT232H: result = ftdi_gpio_init_ft232h(port); break; - case FT232RL: + case FT232R: result = ftdi_gpio_init_ft232r(port); break; case FTX: @@ -2214,12 +2170,9 @@ static void ftdi_gpio_remove(struct usb_serial_port *port) { } * *************************************************************************** */ -/* Probe function to check for special devices */ -static int ftdi_sio_probe(struct usb_serial *serial, - const struct usb_device_id *id) +static int ftdi_probe(struct usb_serial *serial, const struct usb_device_id *id) { - const struct ftdi_sio_quirk *quirk = - (struct ftdi_sio_quirk *)id->driver_info; + const struct ftdi_quirk *quirk = (struct ftdi_quirk *)id->driver_info; if (quirk && quirk->probe) { int ret = quirk->probe(serial); @@ -2232,10 +2185,10 @@ static int ftdi_sio_probe(struct usb_serial *serial, return 0; } -static int ftdi_sio_port_probe(struct usb_serial_port *port) +static int ftdi_port_probe(struct usb_serial_port *port) { + const struct ftdi_quirk *quirk = usb_get_serial_data(port->serial); struct ftdi_private *priv; - const struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial); int result; priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL); @@ -2249,12 +2202,14 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) usb_set_serial_port_data(port, priv); - ftdi_determine_type(port); + result = ftdi_determine_type(port); + if (result) + goto err_free; + ftdi_set_max_packet_size(port); if (read_latency_timer(port) < 0) priv->latency = 16; write_latency_timer(port); - create_sysfs_attrs(port); result = ftdi_gpio_init(port); if (result < 0) { @@ -2264,6 +2219,11 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) } return 0; + +err_free: + kfree(priv); + + return result; } /* Setup for the USB-UIRT device, which requires hardwired @@ -2374,14 +2334,12 @@ static int ftdi_stmclite_probe(struct usb_serial *serial) return 0; } -static void ftdi_sio_port_remove(struct usb_serial_port *port) +static void ftdi_port_remove(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); ftdi_gpio_remove(port); - remove_sysfs_attrs(port); - kfree(priv); } @@ -2395,7 +2353,7 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE, FTDI_SIO_RESET_SIO, - priv->interface, NULL, 0, WDR_TIMEOUT); + priv->channel, NULL, 0, WDR_TIMEOUT); /* Termios defaults are set by usb_serial_init. We don't change port->tty->termios - this would lose speed settings, etc. @@ -2418,7 +2376,7 @@ static void ftdi_dtr_rts(struct usb_serial_port *port, int on) usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0, priv->interface, NULL, 0, + 0, priv->channel, NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "error from flowcontrol urb\n"); } @@ -2611,7 +2569,7 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state) usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_DATA_REQUEST, FTDI_SIO_SET_DATA_REQUEST_TYPE, - value , priv->interface, + value, priv->channel, NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "%s FAILED to enable/disable break state (state was %d)\n", __func__, break_state); @@ -2748,7 +2706,7 @@ no_skip: if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_SET_DATA_REQUEST, FTDI_SIO_SET_DATA_REQUEST_TYPE, - value , priv->interface, + value, priv->channel, NULL, 0, WDR_SHORT_TIMEOUT) < 0) { dev_err(ddev, "%s FAILED to set databits/stopbits/parity\n", __func__); @@ -2761,7 +2719,7 @@ no_data_parity_stop_changes: if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0, priv->interface, + 0, priv->channel, NULL, 0, WDR_TIMEOUT) < 0) { dev_err(ddev, "%s error from disable flowcontrol urb\n", __func__); @@ -2795,7 +2753,7 @@ no_c_cflag_changes: index = FTDI_SIO_DISABLE_FLOW_CTRL; } - index |= priv->interface; + index |= priv->channel; ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, @@ -2823,33 +2781,19 @@ static int ftdi_get_modem_status(struct usb_serial_port *port, if (!buf) return -ENOMEM; /* - * The 8U232AM returns a two byte value (the SIO a 1 byte value) in - * the same format as the data returned from the in point. + * The device returns a two byte value (the SIO a 1 byte value) in the + * same format as the data returned from the IN endpoint. */ - switch (priv->chip_type) { - case SIO: + if (priv->chip_type == SIO) len = 1; - break; - case FT8U232AM: - case FT232BM: - case FT2232C: - case FT232RL: - case FT2232H: - case FT4232H: - case FT232H: - case FTX: + else len = 2; - break; - default: - ret = -EFAULT; - goto out; - } ret = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), FTDI_SIO_GET_MODEM_STATUS_REQUEST, FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, - 0, priv->interface, + 0, priv->channel, buf, len, WDR_TIMEOUT); /* NOTE: We allow short responses and handle that below. */ @@ -2919,6 +2863,41 @@ static int ftdi_ioctl(struct tty_struct *tty, return -ENOIOCTLCMD; } +static struct usb_serial_driver ftdi_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ftdi_sio", + .dev_groups = ftdi_groups, + }, + .description = "FTDI USB Serial Device", + .id_table = id_table_combined, + .num_ports = 1, + .bulk_in_size = 512, + .bulk_out_size = 256, + .probe = ftdi_probe, + .port_probe = ftdi_port_probe, + .port_remove = ftdi_port_remove, + .open = ftdi_open, + .dtr_rts = ftdi_dtr_rts, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, + .process_read_urb = ftdi_process_read_urb, + .prepare_write_buffer = ftdi_prepare_write_buffer, + .tiocmget = ftdi_tiocmget, + .tiocmset = ftdi_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .ioctl = ftdi_ioctl, + .get_serial = get_serial_info, + .set_serial = set_serial_info, + .set_termios = ftdi_set_termios, + .break_ctl = ftdi_break_ctl, + .tx_empty = ftdi_tx_empty, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &ftdi_device, NULL +}; module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index be1641e0408b..55ea61264f91 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -40,11 +40,11 @@ #define FTDI_SIO_READ_PINS 0x0c /* Read immediate value of pins */ #define FTDI_SIO_READ_EEPROM 0x90 /* Read EEPROM */ -/* Interface indices for FT2232, FT2232H and FT4232H devices */ -#define INTERFACE_A 1 -#define INTERFACE_B 2 -#define INTERFACE_C 3 -#define INTERFACE_D 4 +/* Channel indices for FT2232, FT2232H and FT4232H devices */ +#define CHANNEL_A 1 +#define CHANNEL_B 2 +#define CHANNEL_C 3 +#define CHANNEL_D 4 /* @@ -153,18 +153,6 @@ * not supported by the FT8U232AM). */ -enum ftdi_chip_type { - SIO = 1, - FT8U232AM = 2, - FT232BM = 3, - FT2232C = 4, - FT232RL = 5, - FT2232H = 6, - FT4232H = 7, - FT232H = 8, - FTX = 9, -}; - enum ftdi_sio_baudrate { ftdi_sio_b300 = 0, ftdi_sio_b600 = 1, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 31c8ccabbbb7..e2099445db70 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -25,6 +25,13 @@ #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ #define FTDI_232H_PID 0x6014 /* Single channel hi-speed device */ #define FTDI_FTX_PID 0x6015 /* FT-X series (FT201X, FT230X, FT231X, etc) */ +#define FTDI_FT2233HP_PID 0x6040 /* Dual channel hi-speed device with PD */ +#define FTDI_FT4233HP_PID 0x6041 /* Quad channel hi-speed device with PD */ +#define FTDI_FT2232HP_PID 0x6042 /* Dual channel hi-speed device with PD */ +#define FTDI_FT4232HP_PID 0x6043 /* Quad channel hi-speed device with PD */ +#define FTDI_FT233HP_PID 0x6044 /* Dual channel hi-speed device with PD */ +#define FTDI_FT232HP_PID 0x6045 /* Dual channel hi-speed device with PD */ +#define FTDI_FT4232HA_PID 0x6048 /* Quad channel automotive grade hi-speed device */ #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 586ef5551e76..b1e844bf31f8 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -177,6 +177,7 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x413c, 0x81b3)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */ {DEVICE_SWI(0x413c, 0x81b5)}, /* Dell Wireless 5811e QDL */ {DEVICE_SWI(0x413c, 0x81b6)}, /* Dell Wireless 5811e QDL */ + {DEVICE_SWI(0x413c, 0x81c2)}, /* Dell Wireless 5811e */ {DEVICE_SWI(0x413c, 0x81cb)}, /* Dell Wireless 5816e QDL */ {DEVICE_SWI(0x413c, 0x81cc)}, /* Dell Wireless 5816e */ {DEVICE_SWI(0x413c, 0x81cf)}, /* Dell Wireless 5819 */ diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 1db2eefeea22..01f3c2779ccf 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -201,7 +201,7 @@ static int onetouch_connect_input(struct us_data *ss) onetouch->dev = input_dev; if (udev->manufacturer) - strlcpy(onetouch->name, udev->manufacturer, + strscpy(onetouch->name, udev->manufacturer, sizeof(onetouch->name)); if (udev->product) { if (udev->manufacturer) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 4993227ab293..20dcbccb290b 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1275,12 +1275,6 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999, USB_SC_RBC, USB_PR_BULK, NULL, 0 ), -UNUSUAL_DEV(0x090c, 0x1000, 0x1100, 0x1100, - "Samsung", - "Flash Drive FIT", - USB_SC_DEVICE, USB_PR_DEVICE, NULL, - US_FL_MAX_SECTORS_64), - /* aeb */ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, "Feiya", diff --git a/drivers/usb/typec/anx7411.c b/drivers/usb/typec/anx7411.c index e205f409589a..b8f3b75fd7eb 100644 --- a/drivers/usb/typec/anx7411.c +++ b/drivers/usb/typec/anx7411.c @@ -1105,7 +1105,7 @@ static int anx7411_typec_switch_probe(struct anx7411_data *ctx, int ret; struct device_node *node; - node = of_find_node_by_name(dev->of_node, "orientation_switch"); + node = of_get_child_by_name(dev->of_node, "orientation_switch"); if (!node) return 0; @@ -1115,7 +1115,7 @@ static int anx7411_typec_switch_probe(struct anx7411_data *ctx, return ret; } - node = of_find_node_by_name(dev->of_node, "mode_switch"); + node = of_get_child_by_name(dev->of_node, "mode_switch"); if (!node) { dev_err(dev, "no typec mux exist"); ret = -ENODEV; diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c index 464330776cd6..941735c73161 100644 --- a/drivers/usb/typec/mux.c +++ b/drivers/usb/typec/mux.c @@ -29,7 +29,7 @@ static int switch_fwnode_match(struct device *dev, const void *fwnode) if (!is_typec_switch_dev(dev)) return 0; - return dev_fwnode(dev) == fwnode; + return device_match_fwnode(dev, fwnode); } static void *typec_switch_match(struct fwnode_handle *fwnode, const char *id, @@ -259,7 +259,7 @@ static int mux_fwnode_match(struct device *dev, const void *fwnode) if (!is_typec_mux_dev(dev)) return 0; - return dev_fwnode(dev) == fwnode; + return device_match_fwnode(dev, fwnode); } static void *typec_mux_match(struct fwnode_handle *fwnode, const char *id, diff --git a/drivers/usb/typec/qcom-pmic-typec.c b/drivers/usb/typec/qcom-pmic-typec.c index a0454a80c4a2..432ea62f1bab 100644 --- a/drivers/usb/typec/qcom-pmic-typec.c +++ b/drivers/usb/typec/qcom-pmic-typec.c @@ -195,9 +195,8 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev) qcom_usb->role_sw = fwnode_usb_role_switch_get(dev_fwnode(qcom_usb->dev)); if (IS_ERR(qcom_usb->role_sw)) { - if (PTR_ERR(qcom_usb->role_sw) != -EPROBE_DEFER) - dev_err(dev, "failed to get role switch\n"); - ret = PTR_ERR(qcom_usb->role_sw); + ret = dev_err_probe(dev, PTR_ERR(qcom_usb->role_sw), + "failed to get role switch\n"); goto err_typec_port; } diff --git a/drivers/usb/typec/retimer.c b/drivers/usb/typec/retimer.c index 2003731f1bee..ee94dbbe4745 100644 --- a/drivers/usb/typec/retimer.c +++ b/drivers/usb/typec/retimer.c @@ -31,7 +31,7 @@ static bool dev_name_ends_with(struct device *dev, const char *suffix) static int retimer_fwnode_match(struct device *dev, const void *fwnode) { - return dev_fwnode(dev) == fwnode && dev_name_ends_with(dev, "-retimer"); + return device_match_fwnode(dev, fwnode) && dev_name_ends_with(dev, "-retimer"); } static void *typec_retimer_match(struct fwnode_handle *fwnode, const char *id, void *data) diff --git a/drivers/usb/typec/stusb160x.c b/drivers/usb/typec/stusb160x.c index 8638f1d39896..494b371151e0 100644 --- a/drivers/usb/typec/stusb160x.c +++ b/drivers/usb/typec/stusb160x.c @@ -750,11 +750,8 @@ static int stusb160x_probe(struct i2c_client *client) if (client->irq) { chip->role_sw = fwnode_usb_role_switch_get(fwnode); if (IS_ERR(chip->role_sw)) { - ret = PTR_ERR(chip->role_sw); - if (ret != -EPROBE_DEFER) - dev_err(chip->dev, - "Failed to get usb role switch: %d\n", - ret); + ret = dev_err_probe(chip->dev, PTR_ERR(chip->role_sw), + "Failed to get usb role switch\n"); goto port_unregister; } diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig index 073fd2ea5e0b..e6b88ca4a4b9 100644 --- a/drivers/usb/typec/tcpm/Kconfig +++ b/drivers/usb/typec/tcpm/Kconfig @@ -35,6 +35,17 @@ config TYPEC_MT6360 USB Type-C. It works with Type-C Port Controller Manager to provide USB PD and USB Type-C functionalities. +config TYPEC_TCPCI_MT6370 + tristate "MediaTek MT6370 Type-C driver" + depends on MFD_MT6370 + help + MediaTek MT6370 is a multi-functional IC that includes + USB Type-C. It works with Type-C Port Controller Manager + to provide USB PD and USB Type-C functionalities. + + This driver can also be built as a module. The module + will be called "tcpci_mt6370". + config TYPEC_TCPCI_MAXIM tristate "Maxim TCPCI based Type-C chip driver" help diff --git a/drivers/usb/typec/tcpm/Makefile b/drivers/usb/typec/tcpm/Makefile index 7d499f3569fd..906d9dced8e7 100644 --- a/drivers/usb/typec/tcpm/Makefile +++ b/drivers/usb/typec/tcpm/Makefile @@ -6,4 +6,5 @@ typec_wcove-y := wcove.o obj-$(CONFIG_TYPEC_TCPCI) += tcpci.o obj-$(CONFIG_TYPEC_RT1711H) += tcpci_rt1711h.o obj-$(CONFIG_TYPEC_MT6360) += tcpci_mt6360.o +obj-$(CONFIG_TYPEC_TCPCI_MT6370) += tcpci_mt6370.o obj-$(CONFIG_TYPEC_TCPCI_MAXIM) += tcpci_maxim.o diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index 5e9348f28d50..721b2a548084 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -151,7 +151,7 @@ static void _fusb302_log(struct fusb302_chip *chip, const char *fmt, if (fusb302_log_full(chip)) { chip->logbuffer_head = max(chip->logbuffer_head - 1, 0); - strlcpy(tmpbuffer, "overflow", sizeof(tmpbuffer)); + strscpy(tmpbuffer, "overflow", sizeof(tmpbuffer)); } if (chip->logbuffer_head < 0 || @@ -1743,9 +1743,8 @@ static int fusb302_probe(struct i2c_client *client, chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev); if (IS_ERR(chip->tcpm_port)) { fwnode_handle_put(chip->tcpc_dev.fwnode); - ret = PTR_ERR(chip->tcpm_port); - if (ret != -EPROBE_DEFER) - dev_err(dev, "cannot register tcpm port, ret=%d", ret); + ret = dev_err_probe(dev, PTR_ERR(chip->tcpm_port), + "cannot register tcpm port\n"); goto destroy_workqueue; } diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c index f00810d198a8..b2bfcebe218f 100644 --- a/drivers/usb/typec/tcpm/tcpci.c +++ b/drivers/usb/typec/tcpm/tcpci.c @@ -27,11 +27,6 @@ #define VPPS_VALID_MIN_MV 100 #define VSINKDISCONNECT_PD_MIN_PERCENT 90 -#define tcpc_presenting_rd(reg, cc) \ - (!(TCPC_ROLE_CTRL_DRP & (reg)) && \ - (((reg) & (TCPC_ROLE_CTRL_## cc ##_MASK << TCPC_ROLE_CTRL_## cc ##_SHIFT)) == \ - (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_## cc ##_SHIFT))) - struct tcpci { struct device *dev; @@ -218,23 +213,6 @@ static int tcpci_start_toggling(struct tcpc_dev *tcpc, TCPC_CMD_LOOK4CONNECTION); } -static enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink) -{ - switch (cc) { - case 0x1: - return sink ? TYPEC_CC_RP_DEF : TYPEC_CC_RA; - case 0x2: - return sink ? TYPEC_CC_RP_1_5 : TYPEC_CC_RD; - case 0x3: - if (sink) - return TYPEC_CC_RP_3_0; - fallthrough; - case 0x0: - default: - return TYPEC_CC_OPEN; - } -} - static int tcpci_get_cc(struct tcpc_dev *tcpc, enum typec_cc_status *cc1, enum typec_cc_status *cc2) { diff --git a/drivers/usb/typec/tcpm/tcpci_mt6370.c b/drivers/usb/typec/tcpm/tcpci_mt6370.c new file mode 100644 index 000000000000..c5bb201a5163 --- /dev/null +++ b/drivers/usb/typec/tcpm/tcpci_mt6370.c @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 Richtek Technology Corp. + * + * Author: ChiYuan Huang + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MT6370_REG_SYSCTRL8 0x9B + +#define MT6370_AUTOIDLE_MASK BIT(3) + +#define MT6370_VENDOR_ID 0x29CF +#define MT6370_TCPC_DID_A 0x2170 + +struct mt6370_priv { + struct device *dev; + struct regulator *vbus; + struct tcpci *tcpci; + struct tcpci_data tcpci_data; +}; + +static const struct reg_sequence mt6370_reg_init[] = { + REG_SEQ(0xA0, 0x1, 1000), + REG_SEQ(0x81, 0x38, 0), + REG_SEQ(0x82, 0x82, 0), + REG_SEQ(0xBA, 0xFC, 0), + REG_SEQ(0xBB, 0x50, 0), + REG_SEQ(0x9E, 0x8F, 0), + REG_SEQ(0xA1, 0x5, 0), + REG_SEQ(0xA2, 0x4, 0), + REG_SEQ(0xA3, 0x4A, 0), + REG_SEQ(0xA4, 0x01, 0), + REG_SEQ(0x95, 0x01, 0), + REG_SEQ(0x80, 0x71, 0), + REG_SEQ(0x9B, 0x3A, 1000), +}; + +static int mt6370_tcpc_init(struct tcpci *tcpci, struct tcpci_data *data) +{ + u16 did; + int ret; + + ret = regmap_register_patch(data->regmap, mt6370_reg_init, + ARRAY_SIZE(mt6370_reg_init)); + if (ret) + return ret; + + ret = regmap_raw_read(data->regmap, TCPC_BCD_DEV, &did, sizeof(u16)); + if (ret) + return ret; + + if (did == MT6370_TCPC_DID_A) + return regmap_write(data->regmap, TCPC_FAULT_CTRL, 0x80); + + return 0; +} + +static int mt6370_tcpc_set_vconn(struct tcpci *tcpci, struct tcpci_data *data, + bool enable) +{ + return regmap_update_bits(data->regmap, MT6370_REG_SYSCTRL8, + MT6370_AUTOIDLE_MASK, + enable ? 0 : MT6370_AUTOIDLE_MASK); +} + +static int mt6370_tcpc_set_vbus(struct tcpci *tcpci, struct tcpci_data *data, + bool source, bool sink) +{ + struct mt6370_priv *priv = container_of(data, struct mt6370_priv, + tcpci_data); + int ret; + + ret = regulator_is_enabled(priv->vbus); + if (ret < 0) + return ret; + + if (ret && !source) + return regulator_disable(priv->vbus); + + if (!ret && source) + return regulator_enable(priv->vbus); + + return 0; +} + +static irqreturn_t mt6370_irq_handler(int irq, void *dev_id) +{ + struct mt6370_priv *priv = dev_id; + + return tcpci_irq(priv->tcpci); +} + +static int mt6370_check_vendor_info(struct mt6370_priv *priv) +{ + struct regmap *regmap = priv->tcpci_data.regmap; + u16 vid; + int ret; + + ret = regmap_raw_read(regmap, TCPC_VENDOR_ID, &vid, sizeof(u16)); + if (ret) + return ret; + + if (vid != MT6370_VENDOR_ID) + return dev_err_probe(priv->dev, -ENODEV, + "Vendor ID not correct 0x%02x\n", vid); + + return 0; +} + +static void mt6370_unregister_tcpci_port(void *tcpci) +{ + tcpci_unregister_port(tcpci); +} + +static int mt6370_tcpc_probe(struct platform_device *pdev) +{ + struct mt6370_priv *priv; + struct device *dev = &pdev->dev; + int irq, ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + + priv->tcpci_data.regmap = dev_get_regmap(dev->parent, NULL); + if (!priv->tcpci_data.regmap) + return dev_err_probe(dev, -ENODEV, "Failed to init regmap\n"); + + ret = mt6370_check_vendor_info(priv); + if (ret) + return ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return dev_err_probe(dev, irq, "Failed to get irq\n"); + + /* Assign TCPCI feature and ops */ + priv->tcpci_data.auto_discharge_disconnect = 1; + priv->tcpci_data.init = mt6370_tcpc_init; + priv->tcpci_data.set_vconn = mt6370_tcpc_set_vconn; + + priv->vbus = devm_regulator_get_optional(dev, "vbus"); + if (!IS_ERR(priv->vbus)) + priv->tcpci_data.set_vbus = mt6370_tcpc_set_vbus; + + priv->tcpci = tcpci_register_port(dev, &priv->tcpci_data); + if (IS_ERR(priv->tcpci)) + return dev_err_probe(dev, PTR_ERR(priv->tcpci), + "Failed to register tcpci port\n"); + + ret = devm_add_action_or_reset(dev, mt6370_unregister_tcpci_port, priv->tcpci); + if (ret) + return ret; + + ret = devm_request_threaded_irq(dev, irq, NULL, mt6370_irq_handler, + IRQF_ONESHOT, dev_name(dev), priv); + if (ret) + return dev_err_probe(dev, ret, "Failed to allocate irq\n"); + + device_init_wakeup(dev, true); + dev_pm_set_wake_irq(dev, irq); + + return 0; +} + +static int mt6370_tcpc_remove(struct platform_device *pdev) +{ + dev_pm_clear_wake_irq(&pdev->dev); + device_init_wakeup(&pdev->dev, false); + + return 0; +} + +static const struct of_device_id mt6370_tcpc_devid_table[] = { + { .compatible = "mediatek,mt6370-tcpc" }, + {} +}; +MODULE_DEVICE_TABLE(of, mt6370_tcpc_devid_table); + +static struct platform_driver mt6370_tcpc_driver = { + .driver = { + .name = "mt6370-tcpc", + .of_match_table = mt6370_tcpc_devid_table, + }, + .probe = mt6370_tcpc_probe, + .remove = mt6370_tcpc_remove, +}; +module_platform_driver(mt6370_tcpc_driver); + +MODULE_AUTHOR("ChiYuan Huang "); +MODULE_DESCRIPTION("MT6370 USB Type-C Port Controller Interface Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c index c1327713f06d..7b217c712c11 100644 --- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c +++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c @@ -5,6 +5,7 @@ * Richtek RT1711H Type-C Chip Driver */ +#include #include #include #include @@ -13,16 +14,27 @@ #include #include #include +#include #define RT1711H_VID 0x29CF #define RT1711H_PID 0x1711 +#define RT1711H_DID 0x2171 +#define RT1715_DID 0x2173 + +#define RT1711H_PHYCTRL1 0x80 +#define RT1711H_PHYCTRL2 0x81 + +#define RT1711H_RTCTRL4 0x93 +/* rx threshold of rd/rp: 1b0 for level 0.4V/0.7V, 1b1 for 0.35V/0.75V */ +#define RT1711H_BMCIO_RXDZSEL BIT(0) #define RT1711H_RTCTRL8 0x9B - /* Autoidle timeout = (tout * 2 + 1) * 6.4ms */ #define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \ (((ck300) << 7) | ((ship_off) << 5) | \ ((auto_idle) << 3) | ((tout) & 0x07)) +#define RT1711H_AUTOIDLEEN BIT(3) +#define RT1711H_ENEXTMSG BIT(4) #define RT1711H_RTCTRL11 0x9E @@ -35,10 +47,17 @@ #define RT1711H_RTCTRL15 0xA2 #define RT1711H_RTCTRL16 0xA3 +#define RT1711H_RTCTRL18 0xAF +/* 1b0 as fixed rx threshold of rd/rp 0.55V, 1b1 depends on RTCRTL4[0] */ +#define BMCIO_RXDZEN BIT(0) + struct rt1711h_chip { struct tcpci_data data; struct tcpci *tcpci; struct device *dev; + struct regulator *vbus; + bool src_en; + u16 did; }; static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val) @@ -75,8 +94,9 @@ static struct rt1711h_chip *tdata_to_rt1711h(struct tcpci_data *tdata) static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata) { - int ret; struct rt1711h_chip *chip = tdata_to_rt1711h(tdata); + struct regmap *regmap = chip->data.regmap; + int ret; /* CK 300K from 320K, shipping off, auto_idle enable, tout = 32ms */ ret = rt1711h_write8(chip, RT1711H_RTCTRL8, @@ -84,6 +104,14 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata) if (ret < 0) return ret; + /* Enable PD30 extended message for RT1715 */ + if (chip->did == RT1715_DID) { + ret = regmap_update_bits(regmap, RT1711H_RTCTRL8, + RT1711H_ENEXTMSG, RT1711H_ENEXTMSG); + if (ret < 0) + return ret; + } + /* I2C reset : (val + 1) * 12.5ms */ ret = rt1711h_write8(chip, RT1711H_RTCTRL11, RT1711H_RTCTRL11_SET(1, 0x0F)); @@ -101,7 +129,37 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata) return ret; /* dcSRC.DRP : 33% */ - return rt1711h_write16(chip, RT1711H_RTCTRL16, 330); + ret = rt1711h_write16(chip, RT1711H_RTCTRL16, 330); + if (ret < 0) + return ret; + + /* Enable phy discard retry, retry count 7, rx filter deglitch 100 us */ + ret = rt1711h_write8(chip, RT1711H_PHYCTRL1, 0xF1); + if (ret < 0) + return ret; + + /* Decrease wait time of BMC-encoded 1 bit from 2.67us to 2.55us */ + /* wait time : (val * .4167) us */ + return rt1711h_write8(chip, RT1711H_PHYCTRL2, 62); +} + +static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata, + bool src, bool snk) +{ + struct rt1711h_chip *chip = tdata_to_rt1711h(tdata); + int ret; + + if (chip->src_en == src) + return 0; + + if (src) + ret = regulator_enable(chip->vbus); + else + ret = regulator_disable(chip->vbus); + + if (!ret) + chip->src_en = src; + return ret; } static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata, @@ -109,8 +167,55 @@ static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata, { struct rt1711h_chip *chip = tdata_to_rt1711h(tdata); - return rt1711h_write8(chip, RT1711H_RTCTRL8, - RT1711H_RTCTRL8_SET(0, 1, !enable, 2)); + return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL8, + RT1711H_AUTOIDLEEN, enable ? 0 : RT1711H_AUTOIDLEEN); +} + +/* + * Selects the CC PHY noise filter voltage level according to the remote current + * CC voltage level. + * + * @status: The port's current cc status read from IC + * Return 0 if writes succeed; failure code otherwise + */ +static inline int rt1711h_init_cc_params(struct rt1711h_chip *chip, u8 status) +{ + int ret, cc1, cc2; + u8 role = 0; + u32 rxdz_en, rxdz_sel; + + ret = rt1711h_read8(chip, TCPC_ROLE_CTRL, &role); + if (ret < 0) + return ret; + + cc1 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC1_SHIFT) & + TCPC_CC_STATUS_CC1_MASK, + status & TCPC_CC_STATUS_TERM || + tcpc_presenting_rd(role, CC1)); + cc2 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC2_SHIFT) & + TCPC_CC_STATUS_CC2_MASK, + status & TCPC_CC_STATUS_TERM || + tcpc_presenting_rd(role, CC2)); + + if ((cc1 >= TYPEC_CC_RP_1_5 && cc2 < TYPEC_CC_RP_DEF) || + (cc2 >= TYPEC_CC_RP_1_5 && cc1 < TYPEC_CC_RP_DEF)) { + rxdz_en = BMCIO_RXDZEN; + if (chip->did == RT1715_DID) + rxdz_sel = RT1711H_BMCIO_RXDZSEL; + else + rxdz_sel = 0; + } else { + rxdz_en = 0; + rxdz_sel = RT1711H_BMCIO_RXDZSEL; + } + + ret = regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL18, + BMCIO_RXDZEN, rxdz_en); + if (ret < 0) + return ret; + + return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL4, + RT1711H_BMCIO_RXDZSEL, rxdz_sel); } static int rt1711h_start_drp_toggling(struct tcpci *tcpci, @@ -173,6 +278,8 @@ static irqreturn_t rt1711h_irq(int irq, void *dev_id) /* Clear cc change event triggered by starting toggling */ if (status & TCPC_CC_STATUS_TOGGLING) rt1711h_write8(chip, TCPC_ALERT, TCPC_ALERT_CC_STATUS); + else + rt1711h_init_cc_params(chip, status); } out: @@ -191,7 +298,7 @@ static int rt1711h_sw_reset(struct rt1711h_chip *chip) return 0; } -static int rt1711h_check_revision(struct i2c_client *i2c) +static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *chip) { int ret; @@ -209,7 +316,15 @@ static int rt1711h_check_revision(struct i2c_client *i2c) dev_err(&i2c->dev, "pid is not correct, 0x%04x\n", ret); return -ENODEV; } - return 0; + ret = i2c_smbus_read_word_data(i2c, TCPC_BCD_DEV); + if (ret < 0) + return ret; + if (ret != chip->did) { + dev_err(&i2c->dev, "did is not correct, 0x%04x\n", ret); + return -ENODEV; + } + dev_dbg(&i2c->dev, "did is 0x%04x\n", ret); + return ret; } static int rt1711h_probe(struct i2c_client *client, @@ -218,16 +333,18 @@ static int rt1711h_probe(struct i2c_client *client, int ret; struct rt1711h_chip *chip; - ret = rt1711h_check_revision(client); + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->did = (size_t)device_get_match_data(&client->dev); + + ret = rt1711h_check_revision(client, chip); if (ret < 0) { dev_err(&client->dev, "check vid/pid fail\n"); return ret; } - chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; - chip->data.regmap = devm_regmap_init_i2c(client, &rt1711h_regmap_config); if (IS_ERR(chip->data.regmap)) @@ -245,7 +362,12 @@ static int rt1711h_probe(struct i2c_client *client, if (ret < 0) return ret; + chip->vbus = devm_regulator_get(&client->dev, "vbus"); + if (IS_ERR(chip->vbus)) + return PTR_ERR(chip->vbus); + chip->data.init = rt1711h_init; + chip->data.set_vbus = rt1711h_set_vbus; chip->data.set_vconn = rt1711h_set_vconn; chip->data.start_drp_toggling = rt1711h_start_drp_toggling; chip->tcpci = tcpci_register_port(chip->dev, &chip->data); @@ -272,13 +394,15 @@ static void rt1711h_remove(struct i2c_client *client) static const struct i2c_device_id rt1711h_id[] = { { "rt1711h", 0 }, + { "rt1715", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, rt1711h_id); #ifdef CONFIG_OF static const struct of_device_id rt1711h_of_match[] = { - { .compatible = "richtek,rt1711h", }, + { .compatible = "richtek,rt1711h", .data = (void *)RT1711H_DID }, + { .compatible = "richtek,rt1715", .data = (void *)RT1715_DID }, {}, }; MODULE_DEVICE_TABLE(of, rt1711h_of_match); diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index 6364f0d467ea..74fb5a4c6f21 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -1067,11 +1067,9 @@ static int ucsi_register_port(struct ucsi *ucsi, int index) cap->fwnode = ucsi_find_fwnode(con); con->usb_role_sw = fwnode_usb_role_switch_get(cap->fwnode); - if (IS_ERR(con->usb_role_sw)) { - dev_err(ucsi->dev, "con%d: failed to get usb role switch\n", - con->num); - return PTR_ERR(con->usb_role_sw); - } + if (IS_ERR(con->usb_role_sw)) + return dev_err_probe(ucsi->dev, PTR_ERR(con->usb_role_sw), + "con%d: failed to get usb role switch\n", con->num); /* Delay other interactions with the con until registration is complete */ mutex_lock(&con->lock); diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c index 349756335362..835f1c4372ba 100644 --- a/drivers/usb/typec/ucsi/ucsi_ccg.c +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c @@ -125,6 +125,11 @@ struct version_format { #define CCG_FW_BUILD_NVIDIA (('n' << 8) | 'v') #define CCG_OLD_FW_VERSION (CCG_VERSION(0x31) | CCG_VERSION_PATCH(10)) +/* Firmware for Tegra doesn't support UCSI ALT command, built + * for NVIDIA has known issue of reporting wrong capability info + */ +#define CCG_FW_BUILD_NVIDIA_TEGRA (('g' << 8) | 'n') + /* Altmode offset for NVIDIA Function Test Board (FTB) */ #define NVIDIA_FTB_DP_OFFSET (2) #define NVIDIA_FTB_DBG_OFFSET (3) @@ -513,6 +518,7 @@ static int ucsi_ccg_read(struct ucsi *ucsi, unsigned int offset, { struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi); u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(offset); + struct ucsi_capability *cap; struct ucsi_altmode *alt; int ret; @@ -536,6 +542,12 @@ static int ucsi_ccg_read(struct ucsi *ucsi, unsigned int offset, ucsi_ccg_nvidia_altmode(uc, alt); } break; + case UCSI_GET_CAPABILITY: + if (uc->fw_build == CCG_FW_BUILD_NVIDIA_TEGRA) { + cap = val; + cap->features &= ~UCSI_CAP_ALT_MODE_DETAILS; + } + break; default: break; } diff --git a/drivers/usb/typec/ucsi/ucsi_stm32g0.c b/drivers/usb/typec/ucsi/ucsi_stm32g0.c index 16289ff583b4..7b92f0c8de70 100644 --- a/drivers/usb/typec/ucsi/ucsi_stm32g0.c +++ b/drivers/usb/typec/ucsi/ucsi_stm32g0.c @@ -599,7 +599,7 @@ static int ucsi_stm32g0_probe_bootloader(struct ucsi *ucsi) g0->i2c_bl = i2c_new_dummy_device(g0->client->adapter, STM32G0_I2C_BL_ADDR); if (IS_ERR(g0->i2c_bl)) { ret = dev_err_probe(g0->dev, PTR_ERR(g0->i2c_bl), - "Failed to register booloader I2C address\n"); + "Failed to register bootloader I2C address\n"); return ret; } } diff --git a/drivers/usb/usbip/stub_main.c b/drivers/usb/usbip/stub_main.c index 77a5b3f8736a..e8c3131a8543 100644 --- a/drivers/usb/usbip/stub_main.c +++ b/drivers/usb/usbip/stub_main.c @@ -100,7 +100,7 @@ static int add_match_busid(char *busid) for (i = 0; i < MAX_BUSID; i++) { spin_lock(&busid_table[i].busid_lock); if (!busid_table[i].name[0]) { - strlcpy(busid_table[i].name, busid, BUSID_SIZE); + strscpy(busid_table[i].name, busid, BUSID_SIZE); if ((busid_table[i].status != STUB_BUSID_ALLOC) && (busid_table[i].status != STUB_BUSID_REMOV)) busid_table[i].status = STUB_BUSID_ADDED; diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c index 5dd41e8215e0..fc01b31bbb87 100644 --- a/drivers/usb/usbip/stub_rx.c +++ b/drivers/usb/usbip/stub_rx.c @@ -464,7 +464,7 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, int nents; int num_urbs = 1; int pipe = get_pipe(sdev, pdu); - int use_sg = pdu->u.cmd_submit.transfer_flags & URB_DMA_MAP_SG; + int use_sg = pdu->u.cmd_submit.transfer_flags & USBIP_URB_DMA_MAP_SG; int support_sg = 1; int np = 0; int ret, i; @@ -514,7 +514,7 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, num_urbs = nents; priv->completed_urbs = 0; pdu->u.cmd_submit.transfer_flags &= - ~URB_DMA_MAP_SG; + ~USBIP_URB_DMA_MAP_SG; } } else { buffer = kzalloc(buf_len, GFP_KERNEL); diff --git a/drivers/usb/usbip/usbip_common.c b/drivers/usb/usbip/usbip_common.c index 2ab99244bc31..053a2bca4c47 100644 --- a/drivers/usb/usbip/usbip_common.c +++ b/drivers/usb/usbip/usbip_common.c @@ -344,6 +344,91 @@ static unsigned int tweak_transfer_flags(unsigned int flags) return flags; } +/* + * USBIP driver packs URB transfer flags in PDUs that are exchanged + * between Server (usbip_host) and Client (vhci_hcd). URB_* flags + * are internal to kernel and could change. Where as USBIP URB flags + * exchanged in PDUs are USBIP user API must not change. + * + * USBIP_URB* flags are exported as explicit API and client and server + * do mapping from kernel flags to USBIP_URB*. Details as follows: + * + * Client tx path (USBIP_CMD_SUBMIT): + * - Maps URB_* to USBIP_URB_* when it sends USBIP_CMD_SUBMIT packet. + * + * Server rx path (USBIP_CMD_SUBMIT): + * - Maps USBIP_URB_* to URB_* when it receives USBIP_CMD_SUBMIT packet. + * + * Flags aren't included in USBIP_CMD_UNLINK and USBIP_RET_SUBMIT packets + * and no special handling is needed for them in the following cases: + * - Server rx path (USBIP_CMD_UNLINK) + * - Client rx path & Server tx path (USBIP_RET_SUBMIT) + * + * Code paths: + * usbip_pack_pdu() is the common routine that handles packing pdu from + * urb and unpack pdu to an urb. + * + * usbip_pack_cmd_submit() and usbip_pack_ret_submit() handle + * USBIP_CMD_SUBMIT and USBIP_RET_SUBMIT respectively. + * + * usbip_map_urb_to_usbip() and usbip_map_usbip_to_urb() are used + * by usbip_pack_cmd_submit() and usbip_pack_ret_submit() to map + * flags. + */ + +struct urb_to_usbip_flags { + u32 urb_flag; + u32 usbip_flag; +}; + +#define NUM_USBIP_FLAGS 17 + +static const struct urb_to_usbip_flags flag_map[NUM_USBIP_FLAGS] = { + {URB_SHORT_NOT_OK, USBIP_URB_SHORT_NOT_OK}, + {URB_ISO_ASAP, USBIP_URB_ISO_ASAP}, + {URB_NO_TRANSFER_DMA_MAP, USBIP_URB_NO_TRANSFER_DMA_MAP}, + {URB_ZERO_PACKET, USBIP_URB_ZERO_PACKET}, + {URB_NO_INTERRUPT, USBIP_URB_NO_INTERRUPT}, + {URB_FREE_BUFFER, USBIP_URB_FREE_BUFFER}, + {URB_DIR_IN, USBIP_URB_DIR_IN}, + {URB_DIR_OUT, USBIP_URB_DIR_OUT}, + {URB_DIR_MASK, USBIP_URB_DIR_MASK}, + {URB_DMA_MAP_SINGLE, USBIP_URB_DMA_MAP_SINGLE}, + {URB_DMA_MAP_PAGE, USBIP_URB_DMA_MAP_PAGE}, + {URB_DMA_MAP_SG, USBIP_URB_DMA_MAP_SG}, + {URB_MAP_LOCAL, USBIP_URB_MAP_LOCAL}, + {URB_SETUP_MAP_SINGLE, USBIP_URB_SETUP_MAP_SINGLE}, + {URB_SETUP_MAP_LOCAL, USBIP_URB_SETUP_MAP_LOCAL}, + {URB_DMA_SG_COMBINED, USBIP_URB_DMA_SG_COMBINED}, + {URB_ALIGNED_TEMP_BUFFER, USBIP_URB_ALIGNED_TEMP_BUFFER}, +}; + +static unsigned int urb_to_usbip(unsigned int flags) +{ + unsigned int map_flags = 0; + int loop; + + for (loop = 0; loop < NUM_USBIP_FLAGS; loop++) { + if (flags & flag_map[loop].urb_flag) + map_flags |= flag_map[loop].usbip_flag; + } + + return map_flags; +} + +static unsigned int usbip_to_urb(unsigned int flags) +{ + unsigned int map_flags = 0; + int loop; + + for (loop = 0; loop < NUM_USBIP_FLAGS; loop++) { + if (flags & flag_map[loop].usbip_flag) + map_flags |= flag_map[loop].urb_flag; + } + + return map_flags; +} + static void usbip_pack_cmd_submit(struct usbip_header *pdu, struct urb *urb, int pack) { @@ -354,14 +439,14 @@ static void usbip_pack_cmd_submit(struct usbip_header *pdu, struct urb *urb, * will be discussed when usbip is ported to other operating systems. */ if (pack) { - spdu->transfer_flags = - tweak_transfer_flags(urb->transfer_flags); + /* map after tweaking the urb flags */ + spdu->transfer_flags = urb_to_usbip(tweak_transfer_flags(urb->transfer_flags)); spdu->transfer_buffer_length = urb->transfer_buffer_length; spdu->start_frame = urb->start_frame; spdu->number_of_packets = urb->number_of_packets; spdu->interval = urb->interval; } else { - urb->transfer_flags = spdu->transfer_flags; + urb->transfer_flags = usbip_to_urb(spdu->transfer_flags); urb->transfer_buffer_length = spdu->transfer_buffer_length; urb->start_frame = spdu->start_frame; urb->number_of_packets = spdu->number_of_packets; diff --git a/include/linux/phy/tegra/xusb.h b/include/linux/phy/tegra/xusb.h index 3a35e74cdc61..70998e6dd6fd 100644 --- a/include/linux/phy/tegra/xusb.h +++ b/include/linux/phy/tegra/xusb.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * Copyright (c) 2016-2020, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2016-2022, NVIDIA CORPORATION. All rights reserved. */ #ifndef PHY_TEGRA_XUSB_H @@ -21,6 +21,8 @@ int tegra_xusb_padctl_usb3_set_lfps_detect(struct tegra_xusb_padctl *padctl, unsigned int port, bool enable); int tegra_xusb_padctl_set_vbus_override(struct tegra_xusb_padctl *padctl, bool val); +void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy); +void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy); int tegra_phy_xusb_utmi_port_reset(struct phy *phy); int tegra_xusb_padctl_get_usb3_companion(struct tegra_xusb_padctl *padctl, unsigned int port); diff --git a/include/linux/platform_data/usb-s3c2410_udc.h b/include/linux/platform_data/usb-s3c2410_udc.h index 07394819d03b..c0fbe1fe3426 100644 --- a/include/linux/platform_data/usb-s3c2410_udc.h +++ b/include/linux/platform_data/usb-s3c2410_udc.h @@ -22,12 +22,6 @@ enum s3c2410_udc_cmd_e { struct s3c2410_udc_mach_info { void (*udc_command)(enum s3c2410_udc_cmd_e); void (*vbus_draw)(unsigned int ma); - - unsigned int pullup_pin; - unsigned int pullup_pin_inverted; - - unsigned int vbus_pin; - unsigned char vbus_pin_inverted; }; extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *); diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index edf3342507f1..ee38835ed77c 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -62,6 +62,7 @@ struct ci_hdrc_platform_data { #define CI_HDRC_REQUIRES_ALIGNED_DMA BIT(13) #define CI_HDRC_IMX_IS_HSIC BIT(14) #define CI_HDRC_PMQOS BIT(15) +#define CI_HDRC_PHY_VBUS_CONTROL BIT(16) enum usb_dr_mode dr_mode; #define CI_HDRC_CONTROLLER_RESET_EVENT 0 #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 67f8713d3fa3..78cd566ee238 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -479,7 +479,6 @@ static inline int ehset_single_step_set_feature(struct usb_hcd *hcd, int port) struct pci_dev; struct pci_device_id; extern int usb_hcd_pci_probe(struct pci_dev *dev, - const struct pci_device_id *id, const struct hc_driver *driver); extern void usb_hcd_pci_remove(struct pci_dev *dev); extern void usb_hcd_pci_shutdown(struct pci_dev *dev); diff --git a/include/linux/usb/tcpci.h b/include/linux/usb/tcpci.h index 20c0bedb8ec8..17657451c762 100644 --- a/include/linux/usb/tcpci.h +++ b/include/linux/usb/tcpci.h @@ -167,6 +167,11 @@ /* I2C_WRITE_BYTE_COUNT + 1 when TX_BUF_BYTE_x is only accessible I2C_WRITE_BYTE_COUNT */ #define TCPC_TRANSMIT_BUFFER_MAX_LEN 31 +#define tcpc_presenting_rd(reg, cc) \ + (!(TCPC_ROLE_CTRL_DRP & (reg)) && \ + (((reg) & (TCPC_ROLE_CTRL_## cc ##_MASK << TCPC_ROLE_CTRL_## cc ##_SHIFT)) == \ + (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_## cc ##_SHIFT))) + struct tcpci; /* @@ -207,4 +212,21 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci); struct tcpm_port; struct tcpm_port *tcpci_get_tcpm_port(struct tcpci *tcpci); + +static inline enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink) +{ + switch (cc) { + case 0x1: + return sink ? TYPEC_CC_RP_DEF : TYPEC_CC_RA; + case 0x2: + return sink ? TYPEC_CC_RP_1_5 : TYPEC_CC_RD; + case 0x3: + if (sink) + return TYPEC_CC_RP_3_0; + fallthrough; + case 0x0: + default: + return TYPEC_CC_OPEN; + } +} #endif /* __LINUX_USB_TCPCI_H */ diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index b708d63995f4..725ff91b26e0 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -540,6 +540,10 @@ int v4l2_fill_pixfmt_mp(struct v4l2_pix_format_mplane *pixfmt, u32 pixelformat, s64 v4l2_get_link_freq(struct v4l2_ctrl_handler *handler, unsigned int mul, unsigned int div); +void v4l2_simplify_fraction(u32 *numerator, u32 *denominator, + unsigned int n_terms, unsigned int threshold); +u32 v4l2_fraction_to_interval(u32 numerator, u32 denominator); + static inline u64 v4l2_buffer_get_timestamp(const struct v4l2_buffer *buf) { /* diff --git a/include/media/v4l2-uvc.h b/include/media/v4l2-uvc.h new file mode 100644 index 000000000000..f83e31661333 --- /dev/null +++ b/include/media/v4l2-uvc.h @@ -0,0 +1,359 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * v4l2 uvc internal API header + * + * Some commonly needed functions for uvc drivers + */ + +#ifndef __LINUX_V4L2_UVC_H +#define __LINUX_V4L2_UVC_H + +/* ------------------------------------------------------------------------ + * GUIDs + */ +#define UVC_GUID_UVC_CAMERA \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} +#define UVC_GUID_UVC_OUTPUT \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02} +#define UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03} +#define UVC_GUID_UVC_PROCESSING \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01} +#define UVC_GUID_UVC_SELECTOR \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02} +#define UVC_GUID_EXT_GPIO_CONTROLLER \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03} + +#define UVC_GUID_FORMAT_MJPEG \ + { 'M', 'J', 'P', 'G', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_YUY2 \ + { 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_YUY2_ISIGHT \ + { 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0x00, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_NV12 \ + { 'N', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_YV12 \ + { 'Y', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_I420 \ + { 'I', '4', '2', '0', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_UYVY \ + { 'U', 'Y', 'V', 'Y', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_Y800 \ + { 'Y', '8', '0', '0', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_Y8 \ + { 'Y', '8', ' ', ' ', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_Y10 \ + { 'Y', '1', '0', ' ', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_Y12 \ + { 'Y', '1', '2', ' ', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_Y16 \ + { 'Y', '1', '6', ' ', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_BY8 \ + { 'B', 'Y', '8', ' ', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_BA81 \ + { 'B', 'A', '8', '1', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_GBRG \ + { 'G', 'B', 'R', 'G', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_GRBG \ + { 'G', 'R', 'B', 'G', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_RGGB \ + { 'R', 'G', 'G', 'B', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_BG16 \ + { 'B', 'G', '1', '6', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_GB16 \ + { 'G', 'B', '1', '6', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_RG16 \ + { 'R', 'G', '1', '6', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_GR16 \ + { 'G', 'R', '1', '6', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_RGBP \ + { 'R', 'G', 'B', 'P', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_BGR3 \ + { 0x7d, 0xeb, 0x36, 0xe4, 0x4f, 0x52, 0xce, 0x11, \ + 0x9f, 0x53, 0x00, 0x20, 0xaf, 0x0b, 0xa7, 0x70} +#define UVC_GUID_FORMAT_M420 \ + { 'M', '4', '2', '0', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} + +#define UVC_GUID_FORMAT_H264 \ + { 'H', '2', '6', '4', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_H265 \ + { 'H', '2', '6', '5', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_Y8I \ + { 'Y', '8', 'I', ' ', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_Y12I \ + { 'Y', '1', '2', 'I', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_Z16 \ + { 'Z', '1', '6', ' ', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_RW10 \ + { 'R', 'W', '1', '0', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_INVZ \ + { 'I', 'N', 'V', 'Z', 0x90, 0x2d, 0x58, 0x4a, \ + 0x92, 0x0b, 0x77, 0x3f, 0x1f, 0x2c, 0x55, 0x6b} +#define UVC_GUID_FORMAT_INZI \ + { 'I', 'N', 'Z', 'I', 0x66, 0x1a, 0x42, 0xa2, \ + 0x90, 0x65, 0xd0, 0x18, 0x14, 0xa8, 0xef, 0x8a} +#define UVC_GUID_FORMAT_INVI \ + { 'I', 'N', 'V', 'I', 0xdb, 0x57, 0x49, 0x5e, \ + 0x8e, 0x3f, 0xf4, 0x79, 0x53, 0x2b, 0x94, 0x6f} +#define UVC_GUID_FORMAT_CNF4 \ + { 'C', ' ', ' ', ' ', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} + +#define UVC_GUID_FORMAT_D3DFMT_L8 \ + {0x32, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_KSMEDIA_L8_IR \ + {0x32, 0x00, 0x00, 0x00, 0x02, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} + +#define UVC_GUID_FORMAT_HEVC \ + { 'H', 'E', 'V', 'C', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} + +/* ------------------------------------------------------------------------ + * Video formats + */ + +struct uvc_format_desc { + char *name; + u8 guid[16]; + u32 fcc; +}; + +static struct uvc_format_desc uvc_fmts[] = { + { + .name = "YUV 4:2:2 (YUYV)", + .guid = UVC_GUID_FORMAT_YUY2, + .fcc = V4L2_PIX_FMT_YUYV, + }, + { + .name = "YUV 4:2:2 (YUYV)", + .guid = UVC_GUID_FORMAT_YUY2_ISIGHT, + .fcc = V4L2_PIX_FMT_YUYV, + }, + { + .name = "YUV 4:2:0 (NV12)", + .guid = UVC_GUID_FORMAT_NV12, + .fcc = V4L2_PIX_FMT_NV12, + }, + { + .name = "MJPEG", + .guid = UVC_GUID_FORMAT_MJPEG, + .fcc = V4L2_PIX_FMT_MJPEG, + }, + { + .name = "YVU 4:2:0 (YV12)", + .guid = UVC_GUID_FORMAT_YV12, + .fcc = V4L2_PIX_FMT_YVU420, + }, + { + .name = "YUV 4:2:0 (I420)", + .guid = UVC_GUID_FORMAT_I420, + .fcc = V4L2_PIX_FMT_YUV420, + }, + { + .name = "YUV 4:2:0 (M420)", + .guid = UVC_GUID_FORMAT_M420, + .fcc = V4L2_PIX_FMT_M420, + }, + { + .name = "YUV 4:2:2 (UYVY)", + .guid = UVC_GUID_FORMAT_UYVY, + .fcc = V4L2_PIX_FMT_UYVY, + }, + { + .name = "Greyscale 8-bit (Y800)", + .guid = UVC_GUID_FORMAT_Y800, + .fcc = V4L2_PIX_FMT_GREY, + }, + { + .name = "Greyscale 8-bit (Y8 )", + .guid = UVC_GUID_FORMAT_Y8, + .fcc = V4L2_PIX_FMT_GREY, + }, + { + .name = "Greyscale 8-bit (D3DFMT_L8)", + .guid = UVC_GUID_FORMAT_D3DFMT_L8, + .fcc = V4L2_PIX_FMT_GREY, + }, + { + .name = "IR 8-bit (L8_IR)", + .guid = UVC_GUID_FORMAT_KSMEDIA_L8_IR, + .fcc = V4L2_PIX_FMT_GREY, + }, + { + .name = "Greyscale 10-bit (Y10 )", + .guid = UVC_GUID_FORMAT_Y10, + .fcc = V4L2_PIX_FMT_Y10, + }, + { + .name = "Greyscale 12-bit (Y12 )", + .guid = UVC_GUID_FORMAT_Y12, + .fcc = V4L2_PIX_FMT_Y12, + }, + { + .name = "Greyscale 16-bit (Y16 )", + .guid = UVC_GUID_FORMAT_Y16, + .fcc = V4L2_PIX_FMT_Y16, + }, + { + .name = "BGGR Bayer (BY8 )", + .guid = UVC_GUID_FORMAT_BY8, + .fcc = V4L2_PIX_FMT_SBGGR8, + }, + { + .name = "BGGR Bayer (BA81)", + .guid = UVC_GUID_FORMAT_BA81, + .fcc = V4L2_PIX_FMT_SBGGR8, + }, + { + .name = "GBRG Bayer (GBRG)", + .guid = UVC_GUID_FORMAT_GBRG, + .fcc = V4L2_PIX_FMT_SGBRG8, + }, + { + .name = "GRBG Bayer (GRBG)", + .guid = UVC_GUID_FORMAT_GRBG, + .fcc = V4L2_PIX_FMT_SGRBG8, + }, + { + .name = "RGGB Bayer (RGGB)", + .guid = UVC_GUID_FORMAT_RGGB, + .fcc = V4L2_PIX_FMT_SRGGB8, + }, + { + .name = "RGB565", + .guid = UVC_GUID_FORMAT_RGBP, + .fcc = V4L2_PIX_FMT_RGB565, + }, + { + .name = "BGR 8:8:8 (BGR3)", + .guid = UVC_GUID_FORMAT_BGR3, + .fcc = V4L2_PIX_FMT_BGR24, + }, + { + .name = "H.264", + .guid = UVC_GUID_FORMAT_H264, + .fcc = V4L2_PIX_FMT_H264, + }, + { + .name = "H.265", + .guid = UVC_GUID_FORMAT_H265, + .fcc = V4L2_PIX_FMT_HEVC, + }, + { + .name = "Greyscale 8 L/R (Y8I)", + .guid = UVC_GUID_FORMAT_Y8I, + .fcc = V4L2_PIX_FMT_Y8I, + }, + { + .name = "Greyscale 12 L/R (Y12I)", + .guid = UVC_GUID_FORMAT_Y12I, + .fcc = V4L2_PIX_FMT_Y12I, + }, + { + .name = "Depth data 16-bit (Z16)", + .guid = UVC_GUID_FORMAT_Z16, + .fcc = V4L2_PIX_FMT_Z16, + }, + { + .name = "Bayer 10-bit (SRGGB10P)", + .guid = UVC_GUID_FORMAT_RW10, + .fcc = V4L2_PIX_FMT_SRGGB10P, + }, + { + .name = "Bayer 16-bit (SBGGR16)", + .guid = UVC_GUID_FORMAT_BG16, + .fcc = V4L2_PIX_FMT_SBGGR16, + }, + { + .name = "Bayer 16-bit (SGBRG16)", + .guid = UVC_GUID_FORMAT_GB16, + .fcc = V4L2_PIX_FMT_SGBRG16, + }, + { + .name = "Bayer 16-bit (SRGGB16)", + .guid = UVC_GUID_FORMAT_RG16, + .fcc = V4L2_PIX_FMT_SRGGB16, + }, + { + .name = "Bayer 16-bit (SGRBG16)", + .guid = UVC_GUID_FORMAT_GR16, + .fcc = V4L2_PIX_FMT_SGRBG16, + }, + { + .name = "Depth data 16-bit (Z16)", + .guid = UVC_GUID_FORMAT_INVZ, + .fcc = V4L2_PIX_FMT_Z16, + }, + { + .name = "Greyscale 10-bit (Y10 )", + .guid = UVC_GUID_FORMAT_INVI, + .fcc = V4L2_PIX_FMT_Y10, + }, + { + .name = "IR:Depth 26-bit (INZI)", + .guid = UVC_GUID_FORMAT_INZI, + .fcc = V4L2_PIX_FMT_INZI, + }, + { + .name = "4-bit Depth Confidence (Packed)", + .guid = UVC_GUID_FORMAT_CNF4, + .fcc = V4L2_PIX_FMT_CNF4, + }, + { + .name = "HEVC", + .guid = UVC_GUID_FORMAT_HEVC, + .fcc = V4L2_PIX_FMT_HEVC, + }, +}; + +static inline struct uvc_format_desc *uvc_format_by_guid(const u8 guid[16]) +{ + unsigned int len = ARRAY_SIZE(uvc_fmts); + unsigned int i; + + for (i = 0; i < len; ++i) { + if (memcmp(guid, uvc_fmts[i].guid, 16) == 0) + return &uvc_fmts[i]; + } + + return NULL; +} + +#endif /* __LINUX_V4L2_UVC_H */ diff --git a/include/uapi/linux/usbip.h b/include/uapi/linux/usbip.h index fd393d908d8a..e4421ad55b2e 100644 --- a/include/uapi/linux/usbip.h +++ b/include/uapi/linux/usbip.h @@ -24,4 +24,30 @@ enum usbip_device_status { VDEV_ST_USED, VDEV_ST_ERROR }; + +/* USB URB Transfer flags: + * + * USBIP server and client (vchi) pack URBs in TCP packets. The following + * are the transfer type defines used in USBIP protocol. + */ + +#define USBIP_URB_SHORT_NOT_OK 0x0001 +#define USBIP_URB_ISO_ASAP 0x0002 +#define USBIP_URB_NO_TRANSFER_DMA_MAP 0x0004 +#define USBIP_URB_ZERO_PACKET 0x0040 +#define USBIP_URB_NO_INTERRUPT 0x0080 +#define USBIP_URB_FREE_BUFFER 0x0100 +#define USBIP_URB_DIR_IN 0x0200 +#define USBIP_URB_DIR_OUT 0 +#define USBIP_URB_DIR_MASK USBIP_URB_DIR_IN + +#define USBIP_URB_DMA_MAP_SINGLE 0x00010000 +#define USBIP_URB_DMA_MAP_PAGE 0x00020000 +#define USBIP_URB_DMA_MAP_SG 0x00040000 +#define USBIP_URB_MAP_LOCAL 0x00080000 +#define USBIP_URB_SETUP_MAP_SINGLE 0x00100000 +#define USBIP_URB_SETUP_MAP_LOCAL 0x00200000 +#define USBIP_URB_DMA_SG_COMBINED 0x00400000 +#define USBIP_URB_ALIGNED_TEMP_BUFFER 0x00800000 + #endif /* _UAPI_LINUX_USBIP_H */