pwm: Standardize document format

Each text file under Documentation follows a different format. Some
don't even have titles!

Change its representation to follow the adopted standard, using ReST
markup for it to be parseable by Sphinx:

- mark document title;
- mark literal blocks;
- better format the parameters.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This commit is contained in:
Mauro Carvalho Chehab 2017-06-17 12:26:44 -03:00 committed by Thierry Reding
parent 2ea659a9ef
commit c571123c8a

View file

@ -1,4 +1,6 @@
======================================
Pulse Width Modulation (PWM) interface
======================================
This provides an overview about the Linux PWM interface
@ -16,7 +18,7 @@ Users of the legacy PWM API use unique IDs to refer to PWM devices.
Instead of referring to a PWM device via its unique ID, board setup code
should instead register a static mapping that can be used to match PWM
consumers to providers, as given in the following example:
consumers to providers, as given in the following example::
static struct pwm_lookup board_pwm_lookup[] = {
PWM_LOOKUP("tegra-pwm", 0, "pwm-backlight", NULL,
@ -40,9 +42,9 @@ New users should use the pwm_get() function and pass to it the consumer
device or a consumer name. pwm_put() is used to free the PWM device. Managed
variants of these functions, devm_pwm_get() and devm_pwm_put(), also exist.
After being requested, a PWM has to be configured using:
After being requested, a PWM has to be configured using::
int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state);
int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state);
This API controls both the PWM period/duty_cycle config and the
enable/disable state.
@ -72,11 +74,14 @@ interface is provided to use the PWMs from userspace. It is exposed at
pwmchipN, where N is the base of the PWM chip. Inside the directory you
will find:
npwm - The number of PWM channels this chip supports (read-only).
npwm
The number of PWM channels this chip supports (read-only).
export - Exports a PWM channel for use with sysfs (write-only).
export
Exports a PWM channel for use with sysfs (write-only).
unexport - Unexports a PWM channel from sysfs (write-only).
unexport
Unexports a PWM channel from sysfs (write-only).
The PWM channels are numbered using a per-chip index from 0 to npwm-1.
@ -84,21 +89,26 @@ When a PWM channel is exported a pwmX directory will be created in the
pwmchipN directory it is associated with, where X is the number of the
channel that was exported. The following properties will then be available:
period - The total period of the PWM signal (read/write).
Value is in nanoseconds and is the sum of the active and inactive
time of the PWM.
period
The total period of the PWM signal (read/write).
Value is in nanoseconds and is the sum of the active and inactive
time of the PWM.
duty_cycle - The active time of the PWM signal (read/write).
Value is in nanoseconds and must be less than the period.
duty_cycle
The active time of the PWM signal (read/write).
Value is in nanoseconds and must be less than the period.
polarity - Changes the polarity of the PWM signal (read/write).
Writes to this property only work if the PWM chip supports changing
the polarity. The polarity can only be changed if the PWM is not
enabled. Value is the string "normal" or "inversed".
polarity
Changes the polarity of the PWM signal (read/write).
Writes to this property only work if the PWM chip supports changing
the polarity. The polarity can only be changed if the PWM is not
enabled. Value is the string "normal" or "inversed".
enable - Enable/disable the PWM signal (read/write).
0 - disabled
1 - enabled
enable
Enable/disable the PWM signal (read/write).
- 0 - disabled
- 1 - enabled
Implementing a PWM driver
-------------------------