Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci

* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (69 commits)
  davinci: Initial support for Neuros OSD2 platform.
  davinci: remove unused variable in arch/arm/mach-davinci/board-sffsdr.c
  davinci: fix section mismatch warning in arch/arm/mach-davinci/board-dm646x-evm.c
  DaVinci: DM365: Enable DaVinci RTC support for DM365 EVM
  DA8xx/OMAP-L1xx: Add high speed SD/MMC capabilities
  davinci: DA8XX/OMAP-L1XX: enable cpuidle and regulator in defconfig
  davinci: DA850/OMAP-L138: avoid using separate initcall for initializing regulator
  davinci: DA850/OMAP-L138 EVM: register for cpuidle support
  davinci: DA8XX/OMAP-L1XX: add support for cpuidle driver register
  davinci: add CPU idle driver
  davinci: DA8XX/OMAP-L1XX: fix compiler warning
  davinci: DA850/OMAP-L138: eliminate static function declaration
  davinci: DA850/OMAP-L138 EVM: simplify configuration of emac in MII/RMII mode
  davinci: DA850/OMAP-L138 EVM: get rid of DA850_UI_EXP config option
  davinci: DA850/OMAP-L138 EVM: implement autodetect of RMII PHY
  davinci: DA830/OMAP-L137 EVM: do not configure NAND on UI card when MMC/SD is selected
  davinci: DA830/OMAP-L137 EVM: use runtime detection for UI card
  davinci: DA830/OMAP-L137 EVM: remove ifdefs inside da830_evm_init()
  davinci: DA830/OMAP-L137 EVM: fix warning with default config
  davinci: Add NAND support for DA830/OMAP-L137 EVM platform
  ...
This commit is contained in:
Linus Torvalds 2009-12-09 19:02:46 -08:00
commit aed886ce77
47 changed files with 3057 additions and 1768 deletions

File diff suppressed because it is too large Load diff

View file

@ -1,15 +1,13 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30-davinci1
# Mon Jun 29 07:54:15 2009
# Linux kernel version: 2.6.32-rc5
# Thu Oct 22 12:19:19 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@ -18,14 +16,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
@ -48,11 +46,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@ -62,8 +61,7 @@ CONFIG_FAIR_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@ -80,7 +78,6 @@ CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@ -93,6 +90,10 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
#
# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
@ -100,12 +101,16 @@ CONFIG_COMPAT_BRK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
@ -118,7 +123,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@ -139,19 +144,22 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@ -160,25 +168,27 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
CONFIG_ARCH_DAVINCI=y
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_BCMRING is not set
CONFIG_CP_INTC=y
#
@ -191,7 +201,7 @@ CONFIG_CP_INTC=y
# CONFIG_ARCH_DAVINCI_DM644x is not set
# CONFIG_ARCH_DAVINCI_DM355 is not set
# CONFIG_ARCH_DAVINCI_DM646x is not set
# CONFIG_ARCH_DAVINCI_DA830 is not set
CONFIG_ARCH_DAVINCI_DA830=y
CONFIG_ARCH_DAVINCI_DA850=y
CONFIG_ARCH_DAVINCI_DA8XX=y
# CONFIG_ARCH_DAVINCI_DM365 is not set
@ -199,7 +209,14 @@ CONFIG_ARCH_DAVINCI_DA8XX=y
#
# DaVinci Board Type
#
CONFIG_MACH_DAVINCI_DA830_EVM=y
CONFIG_DA830_UI=y
CONFIG_DA830_UI_LCD=y
# CONFIG_DA830_UI_NAND is not set
CONFIG_MACH_DAVINCI_DA850_EVM=y
CONFIG_DA850_UI_EXP=y
CONFIG_DA850_UI_NONE=y
# CONFIG_DA850_UI_RMII is not set
CONFIG_DAVINCI_MUX=y
# CONFIG_DAVINCI_MUX_DEBUG is not set
# CONFIG_DAVINCI_MUX_WARNINGS is not set
@ -212,7 +229,7 @@ CONFIG_CPU_32=y
CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5TJ=y
CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
@ -225,9 +242,9 @@ CONFIG_CPU_CP15_MMU=y
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
CONFIG_CPU_DCACHE_WRITETHROUGH=y
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
# CONFIG_OUTER_CACHE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_COMMON_CLKDEV=y
#
@ -248,11 +265,12 @@ CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
@ -268,12 +286,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_LEDS=y
# CONFIG_LEDS_CPU is not set
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
@ -287,7 +307,24 @@ CONFIG_CMDLINE=""
#
# CPU Power Management
#
# CONFIG_CPU_IDLE is not set
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Floating point emulation
@ -401,6 +438,7 @@ CONFIG_NETFILTER_ADVANCED=y
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@ -415,6 +453,7 @@ CONFIG_NETFILTER_ADVANCED=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@ -440,6 +479,7 @@ CONFIG_NETFILTER_ADVANCED=y
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@ -460,6 +500,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
@ -471,6 +512,7 @@ CONFIG_MISC_DEVICES=y
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@ -494,10 +536,6 @@ CONFIG_BLK_DEV_SD=m
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@ -522,7 +560,6 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@ -553,7 +590,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
# CONFIG_TI_DAVINCI_EMAC is not set
CONFIG_TI_DAVINCI_EMAC=y
# CONFIG_DM9000 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
@ -567,12 +604,11 @@ CONFIG_MII=y
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
@ -588,6 +624,7 @@ CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
@ -611,23 +648,30 @@ CONFIG_INPUT_EVBUG=m
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
@ -636,6 +680,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
@ -684,6 +729,7 @@ CONFIG_HW_RANDOM=m
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
@ -695,6 +741,7 @@ CONFIG_I2C_HELPER_AUTO=y
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_DAVINCI=y
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
@ -715,14 +762,17 @@ CONFIG_I2C_DAVINCI=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
@ -736,8 +786,8 @@ CONFIG_GPIOLIB=y
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCF857X=y
#
# PCI GPIO expanders:
@ -746,11 +796,14 @@ CONFIG_GPIO_PCF857X=m
#
# SPI GPIO expanders:
#
#
# AC97 GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@ -782,31 +835,56 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
# CONFIG_AB3100_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_TPS65023 is not set
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_DAVINCI is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_DA8XX=y
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@ -819,6 +897,16 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
@ -834,6 +922,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
@ -842,6 +935,8 @@ CONFIG_SND_DRIVERS=y
CONFIG_SND_ARM=y
CONFIG_SND_SOC=m
CONFIG_SND_DAVINCI_SOC=m
# CONFIG_SND_DA830_SOC_EVM is not set
# CONFIG_SND_DA850_SOC_EVM is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SOUND_PRIME is not set
@ -849,14 +944,17 @@ CONFIG_SND_SOC_I2C_AND_SPI=m
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
@ -877,14 +975,17 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@ -943,7 +1044,6 @@ CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@ -1039,6 +1139,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
@ -1056,6 +1157,7 @@ CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
@ -1076,29 +1178,29 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@ -1125,7 +1227,6 @@ CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
@ -1157,11 +1258,13 @@ CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set

View file

@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31-rc3-davinci1
# Fri Jul 17 08:26:52 2009
# Linux kernel version: 2.6.32-rc4
# Mon Oct 12 14:13:12 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@ -46,11 +45,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@ -91,17 +91,15 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
#
# Performance Counters
# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
@ -145,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
@ -159,6 +158,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@ -181,11 +181,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
CONFIG_ARCH_DAVINCI=y
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_BCMRING is not set
CONFIG_AINTC=y
CONFIG_ARCH_DAVINCI_DMx=y
@ -208,6 +210,7 @@ CONFIG_ARCH_DAVINCI_DM365=y
#
CONFIG_MACH_DAVINCI_EVM=y
CONFIG_MACH_SFFSDR=y
CONFIG_MACH_NEUROS_OSD2=y
CONFIG_MACH_DAVINCI_DM355_EVM=y
CONFIG_MACH_DM355_LEOPARD=y
CONFIG_MACH_DAVINCI_DM6467_EVM=y
@ -224,7 +227,7 @@ CONFIG_CPU_32=y
CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5TJ=y
CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
@ -239,6 +242,7 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_COMMON_CLKDEV=y
#
@ -259,6 +263,8 @@ CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
@ -280,6 +286,7 @@ CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_LEDS=y
# CONFIG_LEDS_CPU is not set
@ -412,6 +419,7 @@ CONFIG_NETFILTER_ADVANCED=y
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@ -452,6 +460,7 @@ CONFIG_NETFILTER_ADVANCED=y
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@ -461,9 +470,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
@ -499,7 +508,7 @@ CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=m
@ -694,12 +703,10 @@ CONFIG_DM9000_DEBUGLEVEL=4
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
@ -734,6 +741,7 @@ CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
@ -745,10 +753,7 @@ CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
@ -757,12 +762,16 @@ CONFIG_INPUT_EVBUG=m
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_XTKBD=m
@ -777,6 +786,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
@ -787,7 +797,17 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
CONFIG_INPUT_DM355EVM=m
CONFIG_INPUT_DM365EVM=m
#
# Hardware I/O ports
@ -828,13 +848,13 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
@ -868,13 +888,17 @@ CONFIG_I2C_DAVINCI=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
@ -889,7 +913,7 @@ CONFIG_GPIOLIB=y
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_PCF857X=y
#
# PCI GPIO expanders:
@ -898,10 +922,19 @@ CONFIG_GPIO_PCF857X=m
#
# SPI GPIO expanders:
#
#
# AC97 GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
@ -950,6 +983,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
@ -959,9 +993,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@ -988,7 +1020,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_MFD_DM355EVM_MSP is not set
CONFIG_MFD_DM355EVM_MSP=y
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
@ -999,9 +1031,11 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
@ -1013,9 +1047,9 @@ CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
@ -1032,6 +1066,7 @@ CONFIG_FIRMWARE_EDID=y
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_DAVINCI=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
@ -1101,7 +1136,6 @@ CONFIG_SND_SOC_TLV320AIC3X=m
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
@ -1130,6 +1164,7 @@ CONFIG_HID_CYPRESS=m
CONFIG_HID_EZKEY=m
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=m
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
@ -1176,6 +1211,7 @@ CONFIG_USB_MON=m
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
@ -1269,6 +1305,7 @@ CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
@ -1286,6 +1323,7 @@ CONFIG_USB_ZERO=m
# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
@ -1316,8 +1354,10 @@ CONFIG_MMC_BLOCK=m
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_DAVINCI=m
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
@ -1345,6 +1385,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m
@ -1370,6 +1411,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_DM355EVM is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@ -1399,8 +1441,11 @@ CONFIG_RTC_INTF_DEV=y
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
@ -1429,6 +1474,7 @@ CONFIG_XFS_FS=m
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
@ -1500,7 +1546,6 @@ CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@ -1596,6 +1641,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
@ -1634,11 +1680,14 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
@ -1663,7 +1712,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARM_UNWIND=y
# CONFIG_ARM_UNWIND is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
@ -1681,7 +1730,6 @@ CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
@ -1713,11 +1761,13 @@ CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set

View file

@ -32,11 +32,13 @@ config ARCH_DAVINCI_DA830
bool "DA830/OMAP-L137 based system"
select CP_INTC
select ARCH_DAVINCI_DA8XX
select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
config ARCH_DAVINCI_DA850
bool "DA850/OMAP-L138 based system"
select CP_INTC
select ARCH_DAVINCI_DA8XX
select ARCH_HAS_CPUFREQ
config ARCH_DAVINCI_DA8XX
bool
@ -63,6 +65,13 @@ config MACH_SFFSDR
Say Y here to select the Lyrtech Small Form Factor
Software Defined Radio (SFFSDR) board.
config MACH_NEUROS_OSD2
bool "Neuros OSD2 Open Television Set Top Box"
depends on ARCH_DAVINCI_DM644x
help
Configure this option to specify the whether the board used
for development is a Neuros OSD2 Open Set Top Box.
config MACH_DAVINCI_DM355_EVM
bool "TI DM355 EVM"
default ARCH_DAVINCI_DM355
@ -98,16 +107,66 @@ config MACH_DAVINCI_DA830_EVM
bool "TI DA830/OMAP-L137 Reference Platform"
default ARCH_DAVINCI_DA830
depends on ARCH_DAVINCI_DA830
select GPIO_PCF857X
help
Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
choice
prompt "Select DA830/OMAP-L137 UI board peripheral"
depends on MACH_DAVINCI_DA830_EVM
help
The presence of UI card on the DA830/OMAP-L137 EVM is detected
automatically based on successful probe of the I2C based GPIO
expander on that board. This option selected in this menu has
an effect only in case of a successful UI card detection.
config DA830_UI_LCD
bool "LCD"
help
Say Y here to use the LCD as a framebuffer or simple character
display.
config DA830_UI_NAND
bool "NAND flash"
help
Say Y here to use the NAND flash. Do not forget to setup
the switch correctly.
endchoice
config MACH_DAVINCI_DA850_EVM
bool "TI DA850/OMAP-L138 Reference Platform"
default ARCH_DAVINCI_DA850
depends on ARCH_DAVINCI_DA850
select GPIO_PCA953X
help
Say Y here to select the TI DA850/OMAP-L138 Evaluation Module.
choice
prompt "Select peripherals connected to expander on UI board"
depends on MACH_DAVINCI_DA850_EVM
help
The presence of User Interface (UI) card on the DA850/OMAP-L138
EVM is detected automatically based on successful probe of the I2C
based GPIO expander on that card. This option selected in this
menu has an effect only in case of a successful UI card detection.
config DA850_UI_NONE
bool "No peripheral is enabled"
help
Say Y if you do not want to enable any of the peripherals connected
to TCA6416 expander on DA850/OMAP-L138 EVM UI card
config DA850_UI_RMII
bool "RMII Ethernet PHY"
help
Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM.
This PHY is found on the UI daughter card that is supplied with
the EVM.
NOTE: Please take care while choosing this option, MII PHY will
not be functional if RMII mode is selected.
endchoice
config DAVINCI_MUX
bool "DAVINCI multiplexing support"
depends on ARCH_DAVINCI

View file

@ -23,9 +23,14 @@ obj-$(CONFIG_CP_INTC) += cp_intc.o
# Board specific
obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o
obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o
obj-$(CONFIG_MACH_NEUROS_OSD2) += board-neuros-osd2.o
obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o
obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o
obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o
obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o
obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o
obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o
# Power Management
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o

View file

@ -10,51 +10,194 @@
* or implied.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/i2c/at24.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/cp_intc.h>
#include <mach/mux.h>
#include <mach/nand.h>
#include <mach/da8xx.h>
#include <mach/asp.h>
#include <mach/usb.h>
#define DA830_EVM_PHY_MASK 0x0
#define DA830_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */
static struct at24_platform_data da830_evm_i2c_eeprom_info = {
.byte_len = SZ_256K / 8,
.page_size = 64,
.flags = AT24_FLAG_ADDR16,
.setup = davinci_get_mac_addr,
.context = (void *)0x7f00,
#define DA830_EMIF25_ASYNC_DATA_CE3_BASE 0x62000000
#define DA830_EMIF25_CONTROL_BASE 0x68000000
/*
* USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
*/
#define ON_BD_USB_DRV GPIO_TO_PIN(1, 15)
#define ON_BD_USB_OVC GPIO_TO_PIN(2, 4)
static const short da830_evm_usb11_pins[] = {
DA830_GPIO1_15, DA830_GPIO2_4,
-1
};
static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
{
I2C_BOARD_INFO("24c256", 0x50),
.platform_data = &da830_evm_i2c_eeprom_info,
},
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
static da8xx_ocic_handler_t da830_evm_usb_ocic_handler;
static int da830_evm_usb_set_power(unsigned port, int on)
{
gpio_set_value(ON_BD_USB_DRV, on);
return 0;
}
static int da830_evm_usb_get_power(unsigned port)
{
return gpio_get_value(ON_BD_USB_DRV);
}
static int da830_evm_usb_get_oci(unsigned port)
{
return !gpio_get_value(ON_BD_USB_OVC);
}
static irqreturn_t da830_evm_usb_ocic_irq(int, void *);
static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler)
{
int irq = gpio_to_irq(ON_BD_USB_OVC);
int error = 0;
if (handler != NULL) {
da830_evm_usb_ocic_handler = handler;
error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED |
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"OHCI over-current indicator", NULL);
if (error)
printk(KERN_ERR "%s: could not request IRQ to watch "
"over-current indicator changes\n", __func__);
} else
free_irq(irq, NULL);
return error;
}
static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
.set_power = da830_evm_usb_set_power,
.get_power = da830_evm_usb_get_power,
.get_oci = da830_evm_usb_get_oci,
.ocic_notify = da830_evm_usb_ocic_notify,
/* TPS2065 switch @ 5V */
.potpgt = (3 + 1) / 2, /* 3 ms max */
};
static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id)
{
da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1);
return IRQ_HANDLED;
}
static __init void da830_evm_usb_init(void)
{
u32 cfgchip2;
int ret;
/*
* Set up USB clock/mode in the CFGCHIP2 register.
* FYI: CFGCHIP2 is 0x0000ef00 initially.
*/
cfgchip2 = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
/* USB2.0 PHY reference clock is 24 MHz */
cfgchip2 &= ~CFGCHIP2_REFFREQ;
cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ;
/*
* Select internal reference clock for USB 2.0 PHY
* and use it as a clock source for USB 1.1 PHY
* (this is the default setting anyway).
*/
cfgchip2 &= ~CFGCHIP2_USB1PHYCLKMUX;
cfgchip2 |= CFGCHIP2_USB2PHYCLKMUX;
/*
* We have to override VBUS/ID signals when MUSB is configured into the
* host-only mode -- ID pin will float if no cable is connected, so the
* controller won't be able to drive VBUS thinking that it's a B-device.
* Otherwise, we want to use the OTG mode and enable VBUS comparators.
*/
cfgchip2 &= ~CFGCHIP2_OTGMODE;
#ifdef CONFIG_USB_MUSB_HOST
cfgchip2 |= CFGCHIP2_FORCE_HOST;
#else
cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN;
#endif
__raw_writel(cfgchip2, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
/* USB_REFCLKIN is not used. */
ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
if (ret)
pr_warning("%s: USB 2.0 PinMux setup failed: %d\n",
__func__, ret);
else {
/*
* TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A),
* with the power on to power good time of 3 ms.
*/
ret = da8xx_register_usb20(1000, 3);
if (ret)
pr_warning("%s: USB 2.0 registration failed: %d\n",
__func__, ret);
}
};
static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
.bus_freq = 100, /* kHz */
.bus_delay = 0, /* usec */
};
ret = da8xx_pinmux_setup(da830_evm_usb11_pins);
if (ret) {
pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
__func__, ret);
return;
}
ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV");
if (ret) {
printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port "
"power control: %d\n", __func__, ret);
return;
}
gpio_direction_output(ON_BD_USB_DRV, 0);
ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC");
if (ret) {
printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port "
"over-current indicator: %d\n", __func__, ret);
return;
}
gpio_direction_input(ON_BD_USB_OVC);
ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
if (ret)
pr_warning("%s: USB 1.1 registration failed: %d\n",
__func__, ret);
}
static struct davinci_uart_config da830_evm_uart_config __initdata = {
.enabled_uarts = 0x7,
};
static const short da830_evm_mcasp1_pins[] = {
DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
DA830_ACLKR1, DA830_AXR1_6, DA830_AXR1_7, DA830_AXR1_8, DA830_AXR1_10,
DA830_AXR1_11,
-1
};
static u8 da830_iis_serializer_direction[] = {
RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
INACTIVE_MODE, TX_MODE, INACTIVE_MODE, INACTIVE_MODE,
@ -74,6 +217,271 @@ static struct snd_platform_data da830_evm_snd_data = {
.rxnumevt = 1,
};
/*
* GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS.
*/
static const short da830_evm_mmc_sd_pins[] = {
DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
DA830_MMCSD_CMD, DA830_GPIO2_1, DA830_GPIO2_2,
-1
};
#define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1)
static int da830_evm_mmc_get_ro(int index)
{
return gpio_get_value(DA830_MMCSD_WP_PIN);
}
static struct davinci_mmc_config da830_evm_mmc_config = {
.get_ro = da830_evm_mmc_get_ro,
.wires = 4,
.max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_2,
};
static inline void da830_evm_init_mmc(void)
{
int ret;
ret = da8xx_pinmux_setup(da830_evm_mmc_sd_pins);
if (ret) {
pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n",
ret);
return;
}
ret = gpio_request(DA830_MMCSD_WP_PIN, "MMC WP");
if (ret) {
pr_warning("da830_evm_init: can not open GPIO %d\n",
DA830_MMCSD_WP_PIN);
return;
}
gpio_direction_input(DA830_MMCSD_WP_PIN);
ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
if (ret) {
pr_warning("da830_evm_init: mmc/sd registration failed: %d\n",
ret);
gpio_free(DA830_MMCSD_WP_PIN);
}
}
/*
* UI board NAND/NOR flashes only use 8-bit data bus.
*/
static const short da830_evm_emif25_pins[] = {
DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE,
DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0,
-1
};
#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
#define HAS_MMC 1
#else
#define HAS_MMC 0
#endif
#ifdef CONFIG_DA830_UI_NAND
static struct mtd_partition da830_evm_nand_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
[0] = {
.name = "bootloader",
.offset = 0,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next sector */
[1] = {
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* kernel */
[2] = {
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_2M,
.mask_flags = 0,
},
/* file system */
[3] = {
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
}
};
/* flash bbt decriptors */
static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' };
static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' };
static struct nand_bbt_descr da830_evm_nand_bbt_main_descr = {
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
NAND_BBT_WRITE | NAND_BBT_2BIT |
NAND_BBT_VERSION | NAND_BBT_PERCHIP,
.offs = 2,
.len = 4,
.veroffs = 16,
.maxblocks = 4,
.pattern = da830_evm_nand_bbt_pattern
};
static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = {
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
NAND_BBT_WRITE | NAND_BBT_2BIT |
NAND_BBT_VERSION | NAND_BBT_PERCHIP,
.offs = 2,
.len = 4,
.veroffs = 16,
.maxblocks = 4,
.pattern = da830_evm_nand_mirror_pattern
};
static struct davinci_nand_pdata da830_evm_nand_pdata = {
.parts = da830_evm_nand_partitions,
.nr_parts = ARRAY_SIZE(da830_evm_nand_partitions),
.ecc_mode = NAND_ECC_HW,
.ecc_bits = 4,
.options = NAND_USE_FLASH_BBT,
.bbt_td = &da830_evm_nand_bbt_main_descr,
.bbt_md = &da830_evm_nand_bbt_mirror_descr,
};
static struct resource da830_evm_nand_resources[] = {
[0] = { /* First memory resource is NAND I/O window */
.start = DA830_EMIF25_ASYNC_DATA_CE3_BASE,
.end = DA830_EMIF25_ASYNC_DATA_CE3_BASE + PAGE_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = { /* Second memory resource is AEMIF control registers */
.start = DA830_EMIF25_CONTROL_BASE,
.end = DA830_EMIF25_CONTROL_BASE + SZ_32K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device da830_evm_nand_device = {
.name = "davinci_nand",
.id = 1,
.dev = {
.platform_data = &da830_evm_nand_pdata,
},
.num_resources = ARRAY_SIZE(da830_evm_nand_resources),
.resource = da830_evm_nand_resources,
};
static inline void da830_evm_init_nand(int mux_mode)
{
int ret;
if (HAS_MMC) {
pr_warning("WARNING: both MMC/SD and NAND are "
"enabled, but they share AEMIF pins.\n"
"\tDisable MMC/SD for NAND support.\n");
return;
}
ret = da8xx_pinmux_setup(da830_evm_emif25_pins);
if (ret)
pr_warning("da830_evm_init: emif25 mux setup failed: %d\n",
ret);
ret = platform_device_register(&da830_evm_nand_device);
if (ret)
pr_warning("da830_evm_init: NAND device not registered.\n");
gpio_direction_output(mux_mode, 1);
}
#else
static inline void da830_evm_init_nand(int mux_mode) { }
#endif
#ifdef CONFIG_DA830_UI_LCD
static inline void da830_evm_init_lcdc(int mux_mode)
{
int ret;
ret = da8xx_pinmux_setup(da830_lcdcntl_pins);
if (ret)
pr_warning("da830_evm_init: lcdcntl mux setup failed: %d\n",
ret);
ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata);
if (ret)
pr_warning("da830_evm_init: lcd setup failed: %d\n", ret);
gpio_direction_output(mux_mode, 0);
}
#else
static inline void da830_evm_init_lcdc(int mux_mode) { }
#endif
static struct at24_platform_data da830_evm_i2c_eeprom_info = {
.byte_len = SZ_256K / 8,
.page_size = 64,
.flags = AT24_FLAG_ADDR16,
.setup = davinci_get_mac_addr,
.context = (void *)0x7f00,
};
static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
int gpio, unsigned ngpio, void *context)
{
gpio_request(gpio + 6, "UI MUX_MODE");
/* Drive mux mode low to match the default without UI card */
gpio_direction_output(gpio + 6, 0);
da830_evm_init_lcdc(gpio + 6);
da830_evm_init_nand(gpio + 6);
return 0;
}
static int da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio,
unsigned ngpio, void *context)
{
gpio_free(gpio + 6);
return 0;
}
static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
.gpio_base = DAVINCI_N_GPIO,
.setup = da830_evm_ui_expander_setup,
.teardown = da830_evm_ui_expander_teardown,
};
static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
{
I2C_BOARD_INFO("24c256", 0x50),
.platform_data = &da830_evm_i2c_eeprom_info,
},
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
},
{
I2C_BOARD_INFO("pcf8574", 0x3f),
.platform_data = &da830_evm_ui_expander_info,
},
};
static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
.bus_freq = 100, /* kHz */
.bus_delay = 0, /* usec */
};
static __init void da830_evm_init(void)
{
struct davinci_soc_info *soc_info = &davinci_soc_info;
@ -94,6 +502,8 @@ static __init void da830_evm_init(void)
pr_warning("da830_evm_init: i2c0 registration failed: %d\n",
ret);
da830_evm_usb_init();
soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK;
soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
soc_info->emac_pdata->rmii_en = 1;
@ -117,12 +527,18 @@ static __init void da830_evm_init(void)
i2c_register_board_info(1, da830_evm_i2c_devices,
ARRAY_SIZE(da830_evm_i2c_devices));
ret = da8xx_pinmux_setup(da830_mcasp1_pins);
ret = da8xx_pinmux_setup(da830_evm_mcasp1_pins);
if (ret)
pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n",
ret);
da8xx_init_mcasp(1, &da830_evm_snd_data);
da8xx_register_mcasp(1, &da830_evm_snd_data);
da830_evm_init_mmc();
ret = da8xx_register_rtc();
if (ret)
pr_warning("da830_evm_init: rtc setup failed: %d\n", ret);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
@ -146,7 +562,7 @@ static void __init da830_evm_map_io(void)
da830_init();
}
MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP L137 EVM")
MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137 EVM")
.phys_io = IO_PHYS,
.io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
.boot_params = (DA8XX_DDR_BASE + 0x100),

View file

@ -12,36 +12,38 @@
* or implied.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/pca953x.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
#include <mach/nand.h>
#include <mach/mux.h>
#define DA850_EVM_PHY_MASK 0x1
#define DA850_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */
#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
#define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)
#define DA850_LCD_PWR_PIN GPIO_TO_PIN(8, 10)
#define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
#define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1)
#define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6)
static struct mtd_partition da850_evm_norflash_partition[] = {
{
.name = "NOR filesystem",
@ -143,10 +145,149 @@ static struct platform_device da850_evm_nandflash_device = {
.resource = da850_evm_nandflash_resource,
};
static struct platform_device *da850_evm_devices[] __initdata = {
&da850_evm_nandflash_device,
&da850_evm_norflash_device,
};
#define DA8XX_AEMIF_CE2CFG_OFFSET 0x10
#define DA8XX_AEMIF_ASIZE_16BIT 0x1
static void __init da850_evm_init_nor(void)
{
void __iomem *aemif_addr;
aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
/* Configure data bus width of CS2 to 16 bit */
writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
DA8XX_AEMIF_ASIZE_16BIT,
aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
iounmap(aemif_addr);
}
static u32 ui_card_detected;
#if defined(CONFIG_MMC_DAVINCI) || \
defined(CONFIG_MMC_DAVINCI_MODULE)
#define HAS_MMC 1
#else
#define HAS_MMC 0
#endif
static __init void da850_evm_setup_nor_nand(void)
{
int ret = 0;
if (ui_card_detected & !HAS_MMC) {
ret = da8xx_pinmux_setup(da850_nand_pins);
if (ret)
pr_warning("da850_evm_init: nand mux setup failed: "
"%d\n", ret);
ret = da8xx_pinmux_setup(da850_nor_pins);
if (ret)
pr_warning("da850_evm_init: nor mux setup failed: %d\n",
ret);
da850_evm_init_nor();
platform_add_devices(da850_evm_devices,
ARRAY_SIZE(da850_evm_devices));
}
}
#ifdef CONFIG_DA850_UI_RMII
static inline void da850_evm_setup_emac_rmii(int rmii_sel)
{
struct davinci_soc_info *soc_info = &davinci_soc_info;
soc_info->emac_pdata->rmii_en = 1;
gpio_set_value(rmii_sel, 0);
}
#else
static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
#endif
static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
unsigned ngpio, void *c)
{
int sel_a, sel_b, sel_c, ret;
sel_a = gpio + 7;
sel_b = gpio + 6;
sel_c = gpio + 5;
ret = gpio_request(sel_a, "sel_a");
if (ret) {
pr_warning("Cannot open UI expander pin %d\n", sel_a);
goto exp_setup_sela_fail;
}
ret = gpio_request(sel_b, "sel_b");
if (ret) {
pr_warning("Cannot open UI expander pin %d\n", sel_b);
goto exp_setup_selb_fail;
}
ret = gpio_request(sel_c, "sel_c");
if (ret) {
pr_warning("Cannot open UI expander pin %d\n", sel_c);
goto exp_setup_selc_fail;
}
/* deselect all functionalities */
gpio_direction_output(sel_a, 1);
gpio_direction_output(sel_b, 1);
gpio_direction_output(sel_c, 1);
ui_card_detected = 1;
pr_info("DA850/OMAP-L138 EVM UI card detected\n");
da850_evm_setup_nor_nand();
da850_evm_setup_emac_rmii(sel_a);
return 0;
exp_setup_selc_fail:
gpio_free(sel_b);
exp_setup_selb_fail:
gpio_free(sel_a);
exp_setup_sela_fail:
return ret;
}
static int da850_evm_ui_expander_teardown(struct i2c_client *client,
unsigned gpio, unsigned ngpio, void *c)
{
/* deselect all functionalities */
gpio_set_value(gpio + 5, 1);
gpio_set_value(gpio + 6, 1);
gpio_set_value(gpio + 7, 1);
gpio_free(gpio + 5);
gpio_free(gpio + 6);
gpio_free(gpio + 7);
return 0;
}
static struct pca953x_platform_data da850_evm_ui_expander_info = {
.gpio_base = DAVINCI_N_GPIO,
.setup = da850_evm_ui_expander_setup,
.teardown = da850_evm_ui_expander_teardown,
};
static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
}
},
{
I2C_BOARD_INFO("tca6416", 0x20),
.platform_data = &da850_evm_ui_expander_info,
},
};
static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
@ -158,11 +299,6 @@ static struct davinci_uart_config da850_evm_uart_config __initdata = {
.enabled_uarts = 0x7,
};
static struct platform_device *da850_evm_devices[] __initdata = {
&da850_evm_nandflash_device,
&da850_evm_norflash_device,
};
/* davinci da850 evm audio machine driver */
static u8 da850_iis_serializer_direction[] = {
INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
@ -198,6 +334,8 @@ static struct davinci_mmc_config da850_mmc_config = {
.get_ro = da850_evm_mmc_get_ro,
.get_cd = da850_evm_mmc_get_cd,
.wires = 4,
.max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_2,
};
@ -233,57 +371,228 @@ static int da850_lcd_hw_init(void)
return 0;
}
#define DA8XX_AEMIF_CE2CFG_OFFSET 0x10
#define DA8XX_AEMIF_ASIZE_16BIT 0x1
/* TPS65070 voltage regulator support */
static void __init da850_evm_init_nor(void)
/* 3.3V */
struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
{
.supply = "usb0_vdda33",
},
{
.supply = "usb1_vdda33",
},
};
/* 3.3V or 1.8V */
struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
{
.supply = "dvdd3318_a",
},
{
.supply = "dvdd3318_b",
},
{
.supply = "dvdd3318_c",
},
};
/* 1.2V */
struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
{
.supply = "cvdd",
},
};
/* 1.8V LDO */
struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
{
.supply = "sata_vddr",
},
{
.supply = "usb0_vdda18",
},
{
.supply = "usb1_vdda18",
},
{
.supply = "ddr_dvdd18",
},
};
/* 1.2V LDO */
struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
{
.supply = "sata_vdd",
},
{
.supply = "pll0_vdda",
},
{
.supply = "pll1_vdda",
},
{
.supply = "usbs_cvdd",
},
{
.supply = "vddarnwa1",
},
};
struct regulator_init_data tps65070_regulator_data[] = {
/* dcdc1 */
{
.constraints = {
.min_uV = 3150000,
.max_uV = 3450000,
.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS),
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers),
.consumer_supplies = tps65070_dcdc1_consumers,
},
/* dcdc2 */
{
.constraints = {
.min_uV = 1710000,
.max_uV = 3450000,
.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS),
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
.consumer_supplies = tps65070_dcdc2_consumers,
},
/* dcdc3 */
{
.constraints = {
.min_uV = 950000,
.max_uV = 1320000,
.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS),
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
.consumer_supplies = tps65070_dcdc3_consumers,
},
/* ldo1 */
{
.constraints = {
.min_uV = 1710000,
.max_uV = 1890000,
.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS),
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers),
.consumer_supplies = tps65070_ldo1_consumers,
},
/* ldo2 */
{
.constraints = {
.min_uV = 1140000,
.max_uV = 1320000,
.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS),
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers),
.consumer_supplies = tps65070_ldo2_consumers,
},
};
static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
{
I2C_BOARD_INFO("tps6507x", 0x48),
.platform_data = &tps65070_regulator_data[0],
},
};
static int __init pmic_tps65070_init(void)
{
void __iomem *aemif_addr;
aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
/* Configure data bus width of CS2 to 16 bit */
writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
DA8XX_AEMIF_ASIZE_16BIT,
aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
iounmap(aemif_addr);
return i2c_register_board_info(1, da850evm_tps65070_info,
ARRAY_SIZE(da850evm_tps65070_info));
}
#if defined(CONFIG_MTD_PHYSMAP) || \
defined(CONFIG_MTD_PHYSMAP_MODULE)
#define HAS_NOR 1
#else
#define HAS_NOR 0
#endif
static const short da850_evm_lcdc_pins[] = {
DA850_GPIO2_8, DA850_GPIO2_15,
-1
};
#if defined(CONFIG_MMC_DAVINCI) || \
defined(CONFIG_MMC_DAVINCI_MODULE)
#define HAS_MMC 1
#else
#define HAS_MMC 0
#endif
static int __init da850_evm_config_emac(void)
{
void __iomem *cfg_chip3_base;
int ret;
u32 val;
struct davinci_soc_info *soc_info = &davinci_soc_info;
u8 rmii_en = soc_info->emac_pdata->rmii_en;
if (!machine_is_davinci_da850_evm())
return 0;
cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG);
val = __raw_readl(cfg_chip3_base);
if (rmii_en) {
val |= BIT(8);
ret = da8xx_pinmux_setup(da850_rmii_pins);
pr_info("EMAC: RMII PHY configured, MII PHY will not be"
" functional\n");
} else {
val &= ~BIT(8);
ret = da8xx_pinmux_setup(da850_cpgmac_pins);
pr_info("EMAC: MII PHY configured, RMII PHY will not be"
" functional\n");
}
if (ret)
pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n",
ret);
/* configure the CFGCHIP3 register for RMII or MII */
__raw_writel(val, cfg_chip3_base);
ret = davinci_cfg_reg(DA850_GPIO2_6);
if (ret)
pr_warning("da850_evm_init:GPIO(2,6) mux setup "
"failed\n");
ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
if (ret) {
pr_warning("Cannot open GPIO %d\n",
DA850_MII_MDIO_CLKEN_PIN);
return ret;
}
/* Enable/Disable MII MDIO clock */
gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en);
soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
ret = da8xx_register_emac();
if (ret)
pr_warning("da850_evm_init: emac registration failed: %d\n",
ret);
return 0;
}
device_initcall(da850_evm_config_emac);
static __init void da850_evm_init(void)
{
struct davinci_soc_info *soc_info = &davinci_soc_info;
int ret;
ret = da8xx_pinmux_setup(da850_nand_pins);
ret = pmic_tps65070_init();
if (ret)
pr_warning("da850_evm_init: nand mux setup failed: %d\n",
pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n",
ret);
ret = da8xx_pinmux_setup(da850_nor_pins);
if (ret)
pr_warning("da850_evm_init: nor mux setup failed: %d\n",
ret);
da850_evm_init_nor();
platform_add_devices(da850_evm_devices,
ARRAY_SIZE(da850_evm_devices));
ret = da8xx_register_edma();
if (ret)
pr_warning("da850_evm_init: edma registration failed: %d\n",
@ -299,19 +608,6 @@ static __init void da850_evm_init(void)
pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
ret);
soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
soc_info->emac_pdata->rmii_en = 0;
ret = da8xx_pinmux_setup(da850_cpgmac_pins);
if (ret)
pr_warning("da850_evm_init: cpgmac mux setup failed: %d\n",
ret);
ret = da8xx_register_emac();
if (ret)
pr_warning("da850_evm_init: emac registration failed: %d\n",
ret);
ret = da8xx_register_watchdog();
if (ret)
@ -319,11 +615,6 @@ static __init void da850_evm_init(void)
ret);
if (HAS_MMC) {
if (HAS_NOR)
pr_warning("WARNING: both NOR Flash and MMC/SD are "
"enabled, but they share AEMIF pins.\n"
"\tDisable one of them.\n");
ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
if (ret)
pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
@ -365,22 +656,42 @@ static __init void da850_evm_init(void)
pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
ret);
da8xx_init_mcasp(0, &da850_evm_snd_data);
da8xx_register_mcasp(0, &da850_evm_snd_data);
ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
if (ret)
pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
ret);
/* Handle board specific muxing for LCD here */
ret = da8xx_pinmux_setup(da850_evm_lcdc_pins);
if (ret)
pr_warning("da850_evm_init: evm specific lcd mux setup "
"failed: %d\n", ret);
ret = da850_lcd_hw_init();
if (ret)
pr_warning("da850_evm_init: lcd initialization failed: %d\n",
ret);
ret = da8xx_register_lcdc();
ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
if (ret)
pr_warning("da850_evm_init: lcdc registration failed: %d\n",
ret);
ret = da8xx_register_rtc();
if (ret)
pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);
ret = da850_register_cpufreq();
if (ret)
pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
ret);
ret = da8xx_register_cpuidle();
if (ret)
pr_warning("da850_evm_init: cpuidle registration failed: %d\n",
ret);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE

View file

@ -9,15 +9,13 @@
* or implied.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/videodev2.h>
@ -25,20 +23,15 @@
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <mach/hardware.h>
#include <mach/dm355.h>
#include <mach/psc.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/usb.h>
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
@ -86,8 +79,9 @@ static struct davinci_nand_pdata davinci_nand_data = {
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW_SYNDROME,
.ecc_mode = NAND_ECC_HW,
.options = NAND_USE_FLASH_BBT,
.ecc_bits = 4,
};
static struct resource davinci_nand_resources[] = {
@ -344,7 +338,7 @@ static __init void dm355_evm_init(void)
gpio_request(2, "usb_id_toggle");
gpio_direction_output(2, USB_ID_VALUE);
/* irlml6401 switches over 1A in under 8 msec */
setup_usb(500, 8);
davinci_setup_usb(1000, 8);
davinci_setup_mmc(0, &dm355evm_mmc_config);
davinci_setup_mmc(1, &dm355evm_mmc_config);

View file

@ -8,34 +8,27 @@
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <mach/hardware.h>
#include <mach/dm355.h>
#include <mach/psc.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/usb.h>
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
@ -270,7 +263,7 @@ static __init void dm355_leopard_init(void)
gpio_request(2, "usb_id_toggle");
gpio_direction_output(2, USB_ID_VALUE);
/* irlml6401 switches over 1A in under 8 msec */
setup_usb(500, 8);
davinci_setup_usb(1000, 8);
davinci_setup_mmc(0, &dm355leopard_mmc_config);
davinci_setup_mmc(1, &dm355leopard_mmc_config);

View file

@ -13,9 +13,8 @@
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/clk.h>
@ -24,20 +23,19 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <asm/setup.h>
#include <linux/input.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/mux.h>
#include <mach/hardware.h>
#include <mach/dm365.h>
#include <mach/psc.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
#include <mach/mmc.h>
#include <mach/nand.h>
#include <mach/keyscan.h>
static inline int have_imager(void)
{
@ -144,6 +142,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW,
.options = NAND_USE_FLASH_BBT,
.ecc_bits = 4,
};
static struct resource davinci_nand_resources[] = {
@ -176,11 +175,16 @@ static struct at24_platform_data eeprom_info = {
.context = (void *)0x7f00,
};
static struct snd_platform_data dm365_evm_snd_data;
static struct i2c_board_info i2c_info[] = {
{
I2C_BOARD_INFO("24c256", 0x50),
.platform_data = &eeprom_info,
},
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
},
};
static struct davinci_i2c_platform_data i2c_pdata = {
@ -188,6 +192,38 @@ static struct davinci_i2c_platform_data i2c_pdata = {
.bus_delay = 0 /* usec */,
};
#ifdef CONFIG_KEYBOARD_DAVINCI
static unsigned short dm365evm_keymap[] = {
KEY_KP2,
KEY_LEFT,
KEY_EXIT,
KEY_DOWN,
KEY_ENTER,
KEY_UP,
KEY_KP1,
KEY_RIGHT,
KEY_MENU,
KEY_RECORD,
KEY_REWIND,
KEY_KPMINUS,
KEY_STOP,
KEY_FASTFORWARD,
KEY_KPPLUS,
KEY_PLAYPAUSE,
0
};
static struct davinci_ks_platform_data dm365evm_ks_data = {
.keymap = dm365evm_keymap,
.keymapsize = ARRAY_SIZE(dm365evm_keymap),
.rep = 1,
/* Scan period = strobe + interval */
.strobe = 0x5,
.interval = 0x2,
.matrix_type = DAVINCI_KEYSCAN_MATRIX_4X4,
};
#endif
static int cpld_mmc_get_cd(int module)
{
if (!cpld)
@ -472,6 +508,13 @@ static __init void dm365_evm_init(void)
/* maybe setup mmc1/etc ... _after_ mmc0 */
evm_init_cpld();
dm365_init_asp(&dm365_evm_snd_data);
dm365_init_rtc();
#ifdef CONFIG_KEYBOARD_DAVINCI
dm365_init_ks(&dm365evm_ks_data);
#endif
}
static __init void dm365_evm_irq_init(void)

View file

@ -9,45 +9,34 @@
* or implied.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/memory.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/i2c/at24.h>
#include <linux/etherdevice.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
#include <linux/phy.h>
#include <linux/clk.h>
#include <linux/videodev2.h>
#include <media/tvp514x.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <mach/dm644x.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
#include <mach/mux.h>
#include <mach/psc.h>
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/emac.h>
#include <mach/usb.h>
#define DM644X_EVM_PHY_MASK (0x2)
#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
@ -477,7 +466,7 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
/* irlml6401 switches over 1A, in under 8 msec;
* now it can be managed by nDRV_VBUS ...
*/
setup_usb(500, 8);
davinci_setup_usb(1000, 8);
return 0;
}

View file

@ -17,38 +17,28 @@
**************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/major.h>
#include <linux/root_dev.h>
#include <linux/dma-mapping.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/pcf857x.h>
#include <linux/etherdevice.h>
#include <media/tvp514x.h>
#include <asm/setup.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <mach/dm646x.h>
#include <mach/common.h>
#include <mach/psc.h>
#include <mach/serial.h>
#include <mach/i2c.h>
#include <mach/mmc.h>
#include <mach/emac.h>
#include <mach/nand.h>
#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
@ -57,6 +47,11 @@
#define HAS_ATA 0
#endif
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x20008000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x42000000
#define NAND_BLOCK_SIZE SZ_128K
/* CPLD Register 0 bits to control ATA */
#define DM646X_EVM_ATA_RST BIT(0)
#define DM646X_EVM_ATA_PWD BIT(1)
@ -92,6 +87,63 @@ static struct davinci_uart_config uart_config __initdata = {
.enabled_uarts = (1 << 0),
};
/* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot
* and U-Boot environment this avoids dependency on any particular combination
* of UBL, U-Boot or flashing tools etc.
*/
static struct mtd_partition davinci_nand_partitions[] = {
{
/* UBL, U-Boot with environment */
.name = "bootloader",
.offset = MTDPART_OFS_APPEND,
.size = 16 * NAND_BLOCK_SIZE,
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_4M,
.mask_flags = 0,
}, {
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
}
};
static struct davinci_nand_pdata davinci_nand_data = {
.mask_cle = 0x80000,
.mask_ale = 0x40000,
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW,
.options = 0,
};
static struct resource davinci_nand_resources[] = {
{
.start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
.end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
.flags = IORESOURCE_MEM,
}, {
.start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
.end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device davinci_nand_device = {
.name = "davinci_nand",
.id = 0,
.num_resources = ARRAY_SIZE(davinci_nand_resources),
.resource = davinci_nand_resources,
.dev = {
.platform_data = &davinci_nand_data,
},
};
/* CPLD Register 0 Client: used for I/O Control */
static int cpld_reg0_probe(struct i2c_client *client,
const struct i2c_device_id *id)
@ -142,7 +194,7 @@ static struct gpio_led evm_leds[] = {
{ .name = "DS4", .active_low = 1, },
};
static __initconst struct gpio_led_platform_data evm_led_data = {
static const struct gpio_led_platform_data evm_led_data = {
.num_leds = ARRAY_SIZE(evm_leds),
.leds = evm_leds,
};
@ -647,6 +699,8 @@ static __init void evm_init(void)
dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
platform_device_register(&davinci_nand_device);
if (HAS_ATA)
dm646x_init_ide();

View file

@ -0,0 +1,323 @@
/*
* Neuros Technologies OSD2 board support
*
* Modified from original 644X-EVM board support.
* 2008 (c) Neuros Technology, LLC.
* 2009 (c) Jorge Luis Zapata Muga <jorgeluis.zapata@gmail.com>
* 2009 (c) Andrey A. Porodko <Andrey.Porodko@gmail.com>
*
* The Neuros OSD 2.0 is the hardware component of the Neuros Open
* Internet Television Platform. Hardware is very close to TI
* DM644X-EVM board. It has:
* DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC,
* USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video.
* Additionaly realtime clock, IR remote control receiver,
* IR Blaster based on MSP430 (firmware although is different
* from used in DM644X-EVM), internal ATA-6 3.5 HDD drive
* with PATA interface, two muxed red-green leds.
*
* For more information please refer to
* http://wiki.neurostechnology.com/index.php/OSD_2.0_HD
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/dm644x.h>
#include <mach/i2c.h>
#include <mach/serial.h>
#include <mach/mux.h>
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/usb.h>
#define NEUROS_OSD2_PHY_MASK 0x2
#define NEUROS_OSD2_MDIO_FREQUENCY 2200000 /* PHY bus frequency */
#define DAVINCI_CFC_ATA_BASE 0x01C66000
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
#define LXT971_PHY_ID 0x001378e2
#define LXT971_PHY_MASK 0xfffffff0
#define NTOSD2_AUDIOSOC_I2C_ADDR 0x18
#define NTOSD2_MSP430_I2C_ADDR 0x59
#define NTOSD2_MSP430_IRQ 2
/* Neuros OSD2 has a Samsung 256 MByte NAND flash (Dev ID of 0xAA,
* 2048 blocks in the device, 64 pages per block, 2048 bytes per
* page.
*/
#define NAND_BLOCK_SIZE SZ_128K
struct mtd_partition davinci_ntosd2_nandflash_partition[] = {
{
/* UBL (a few copies) plus U-Boot */
.name = "bootloader",
.offset = 0,
.size = 15 * NAND_BLOCK_SIZE,
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
/* U-Boot environment */
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = 1 * NAND_BLOCK_SIZE,
.mask_flags = 0,
}, {
/* Kernel */
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_4M,
.mask_flags = 0,
}, {
/* File System */
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
}
/* A few blocks at end hold a flash Bad Block Table. */
};
static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
.parts = davinci_ntosd2_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
.options = NAND_USE_FLASH_BBT,
};
static struct resource davinci_ntosd2_nandflash_resource[] = {
{
.start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
.end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
.flags = IORESOURCE_MEM,
}, {
.start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
.end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device davinci_ntosd2_nandflash_device = {
.name = "davinci_nand",
.id = 0,
.dev = {
.platform_data = &davinci_ntosd2_nandflash_data,
},
.num_resources = ARRAY_SIZE(davinci_ntosd2_nandflash_resource),
.resource = davinci_ntosd2_nandflash_resource,
};
static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
static struct platform_device davinci_fb_device = {
.name = "davincifb",
.id = -1,
.dev = {
.dma_mask = &davinci_fb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = 0,
};
static struct resource ide_resources[] = {
{
.start = DAVINCI_CFC_ATA_BASE,
.end = DAVINCI_CFC_ATA_BASE + 0x7ff,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_IDE,
.end = IRQ_IDE,
.flags = IORESOURCE_IRQ,
},
};
static u64 ide_dma_mask = DMA_BIT_MASK(32);
static struct platform_device ide_dev = {
.name = "palm_bk3710",
.id = -1,
.resource = ide_resources,
.num_resources = ARRAY_SIZE(ide_resources),
.dev = {
.dma_mask = &ide_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
static struct snd_platform_data dm644x_ntosd2_snd_data;
static struct gpio_led ntosd2_leds[] = {
{ .name = "led1_green", .gpio = GPIO(10), },
{ .name = "led1_red", .gpio = GPIO(11), },
{ .name = "led2_green", .gpio = GPIO(12), },
{ .name = "led2_red", .gpio = GPIO(13), },
};
static struct gpio_led_platform_data ntosd2_leds_data = {
.num_leds = ARRAY_SIZE(ntosd2_leds),
.leds = ntosd2_leds,
};
static struct platform_device ntosd2_leds_dev = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &ntosd2_leds_data,
},
};
static struct platform_device *davinci_ntosd2_devices[] __initdata = {
&davinci_fb_device,
&ntosd2_leds_dev,
};
static struct davinci_uart_config uart_config __initdata = {
.enabled_uarts = (1 << 0),
};
static void __init davinci_ntosd2_map_io(void)
{
dm644x_init();
}
/*
I2C initialization
*/
static struct davinci_i2c_platform_data ntosd2_i2c_pdata = {
.bus_freq = 20 /* kHz */,
.bus_delay = 100 /* usec */,
};
static struct i2c_board_info __initdata ntosd2_i2c_info[] = {
};
static int ntosd2_init_i2c(void)
{
int status;
davinci_init_i2c(&ntosd2_i2c_pdata);
status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type);
if (status == 0) {
status = gpio_direction_input(NTOSD2_MSP430_IRQ);
if (status == 0) {
status = gpio_to_irq(NTOSD2_MSP430_IRQ);
if (status > 0) {
ntosd2_i2c_info[0].irq = status;
i2c_register_board_info(1,
ntosd2_i2c_info,
ARRAY_SIZE(ntosd2_i2c_info));
}
}
}
return status;
}
static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
.wires = 4,
.version = MMC_CTLR_VERSION_1
};
#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
#define HAS_ATA 1
#else
#define HAS_ATA 0
#endif
#if defined(CONFIG_MTD_NAND_DAVINCI) || \
defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
#define HAS_NAND 1
#else
#define HAS_NAND 0
#endif
static __init void davinci_ntosd2_init(void)
{
struct clk *aemif_clk;
struct davinci_soc_info *soc_info = &davinci_soc_info;
int status;
aemif_clk = clk_get(NULL, "aemif");
clk_enable(aemif_clk);
if (HAS_ATA) {
if (HAS_NAND)
pr_warning("WARNING: both IDE and Flash are "
"enabled, but they share AEMIF pins.\n"
"\tDisable IDE for NAND/NOR support.\n");
davinci_cfg_reg(DM644X_HPIEN_DISABLE);
davinci_cfg_reg(DM644X_ATAEN);
davinci_cfg_reg(DM644X_HDIREN);
platform_device_register(&ide_dev);
} else if (HAS_NAND) {
davinci_cfg_reg(DM644X_HPIEN_DISABLE);
davinci_cfg_reg(DM644X_ATAEN_DISABLE);
/* only one device will be jumpered and detected */
if (HAS_NAND)
platform_device_register(
&davinci_ntosd2_nandflash_device);
}
platform_add_devices(davinci_ntosd2_devices,
ARRAY_SIZE(davinci_ntosd2_devices));
/* Initialize I2C interface specific for this board */
status = ntosd2_init_i2c();
if (status < 0)
pr_warning("davinci_ntosd2_init: msp430 irq setup failed:"
" %d\n", status);
davinci_serial_init(&uart_config);
dm644x_init_asp(&dm644x_ntosd2_snd_data);
soc_info->emac_pdata->phy_mask = NEUROS_OSD2_PHY_MASK;
soc_info->emac_pdata->mdio_max_freq = NEUROS_OSD2_MDIO_FREQUENCY;
davinci_setup_usb(1000, 8);
/*
* Mux the pins to be GPIOs, VLYNQEN is already done at startup.
* The AEAWx are five new AEAW pins that can be muxed by separately.
* They are a bitmask for GPIO management. According TI
* documentation (http://www.ti.com/lit/gpn/tms320dm6446) to employ
* gpio(10,11,12,13) for leds any combination of bits works except
* four last. So we are to reset all five.
*/
davinci_cfg_reg(DM644X_AEAW0);
davinci_cfg_reg(DM644X_AEAW1);
davinci_cfg_reg(DM644X_AEAW2);
davinci_cfg_reg(DM644X_AEAW3);
davinci_cfg_reg(DM644X_AEAW4);
davinci_setup_mmc(0, &davinci_ntosd2_mmc_config);
}
static __init void davinci_ntosd2_irq_init(void)
{
davinci_irq_init();
}
MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
.phys_io = IO_PHYS,
.io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
.boot_params = (DAVINCI_DDR_BASE + 0x100),
.map_io = davinci_ntosd2_map_io,
.init_irq = davinci_ntosd2_irq_init,
.timer = &davinci_timer,
.init_machine = davinci_ntosd2_init,
MACHINE_END

View file

@ -23,35 +23,24 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/etherdevice.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <mach/dm644x.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
#include <mach/psc.h>
#include <mach/mux.h>
#include <mach/usb.h>
#define SFFSDR_PHY_MASK (0x2)
#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
@ -107,11 +96,6 @@ static struct platform_device davinci_sffsdr_nandflash_device = {
.resource = davinci_sffsdr_nandflash_resource,
};
static struct emac_platform_data sffsdr_emac_pdata = {
.phy_mask = SFFSDR_PHY_MASK,
.mdio_max_freq = SFFSDR_MDIO_FREQUENCY,
};
static struct at24_platform_data eeprom_info = {
.byte_len = (64*1024) / 8,
.page_size = 32,
@ -164,7 +148,7 @@ static __init void davinci_sffsdr_init(void)
davinci_serial_init(&uart_config);
soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK;
soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY;
setup_usb(0, 0); /* We support only peripheral mode. */
davinci_setup_usb(0, 0); /* We support only peripheral mode. */
/* mux VLYNQ pins */
davinci_cfg_reg(DM644X_VLYNQEN);

View file

@ -17,8 +17,8 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <mach/hardware.h>
@ -42,8 +42,7 @@ static void __clk_enable(struct clk *clk)
if (clk->parent)
__clk_enable(clk->parent);
if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
clk->lpsc, 1);
davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 1);
}
static void __clk_disable(struct clk *clk)
@ -51,8 +50,7 @@ static void __clk_disable(struct clk *clk)
if (WARN_ON(clk->usecount == 0))
return;
if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
clk->lpsc, 0);
davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 0);
if (clk->parent)
__clk_disable(clk->parent);
}
@ -99,19 +97,73 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
if (clk->round_rate)
return clk->round_rate(clk, rate);
return clk->rate;
}
EXPORT_SYMBOL(clk_round_rate);
/* Propagate rate to children */
static void propagate_rate(struct clk *root)
{
struct clk *clk;
list_for_each_entry(clk, &root->children, childnode) {
if (clk->recalc)
clk->rate = clk->recalc(clk);
propagate_rate(clk);
}
}
int clk_set_rate(struct clk *clk, unsigned long rate)
{
unsigned long flags;
int ret = -EINVAL;
if (clk == NULL || IS_ERR(clk))
return ret;
spin_lock_irqsave(&clockfw_lock, flags);
if (clk->set_rate)
ret = clk->set_rate(clk, rate);
if (ret == 0) {
if (clk->recalc)
clk->rate = clk->recalc(clk);
propagate_rate(clk);
}
spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
}
EXPORT_SYMBOL(clk_set_rate);
int clk_set_parent(struct clk *clk, struct clk *parent)
{
unsigned long flags;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
/* changing the clk rate is not supported */
return -EINVAL;
/* Cannot change parent on enabled clock */
if (WARN_ON(clk->usecount))
return -EINVAL;
mutex_lock(&clocks_mutex);
clk->parent = parent;
list_del_init(&clk->childnode);
list_add(&clk->childnode, &clk->parent->children);
mutex_unlock(&clocks_mutex);
spin_lock_irqsave(&clockfw_lock, flags);
if (clk->recalc)
clk->rate = clk->recalc(clk);
propagate_rate(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
return 0;
}
EXPORT_SYMBOL(clk_set_rate);
EXPORT_SYMBOL(clk_set_parent);
int clk_register(struct clk *clk)
{
@ -123,16 +175,24 @@ int clk_register(struct clk *clk)
clk->name, clk->parent->name))
return -EINVAL;
INIT_LIST_HEAD(&clk->children);
mutex_lock(&clocks_mutex);
list_add_tail(&clk->node, &clocks);
if (clk->parent)
list_add_tail(&clk->childnode, &clk->parent->children);
mutex_unlock(&clocks_mutex);
/* If rate is already set, use it */
if (clk->rate)
return 0;
/* Else, see if there is a way to calculate it */
if (clk->recalc)
clk->rate = clk->recalc(clk);
/* Otherwise, default to parent rate */
if (clk->parent)
else if (clk->parent)
clk->rate = clk->parent->rate;
return 0;
@ -146,6 +206,7 @@ void clk_unregister(struct clk *clk)
mutex_lock(&clocks_mutex);
list_del(&clk->node);
list_del(&clk->childnode);
mutex_unlock(&clocks_mutex);
}
EXPORT_SYMBOL(clk_unregister);
@ -166,11 +227,11 @@ static int __init clk_disable_unused(void)
continue;
/* ignore if in Disabled or SwRstDisable states */
if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc))
if (!davinci_psc_is_clk_active(ck->gpsc, ck->lpsc))
continue;
pr_info("Clocks: disable unused %s\n", ck->name);
davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0);
davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc, 0);
}
spin_unlock_irq(&clockfw_lock);
@ -179,50 +240,62 @@ static int __init clk_disable_unused(void)
late_initcall(clk_disable_unused);
#endif
static void clk_sysclk_recalc(struct clk *clk)
static unsigned long clk_sysclk_recalc(struct clk *clk)
{
u32 v, plldiv;
struct pll_data *pll;
unsigned long rate = clk->rate;
/* If this is the PLL base clock, no more calculations needed */
if (clk->pll_data)
return;
return rate;
if (WARN_ON(!clk->parent))
return;
return rate;
clk->rate = clk->parent->rate;
rate = clk->parent->rate;
/* Otherwise, the parent must be a PLL */
if (WARN_ON(!clk->parent->pll_data))
return;
return rate;
pll = clk->parent->pll_data;
/* If pre-PLL, source clock is before the multiplier and divider(s) */
if (clk->flags & PRE_PLL)
clk->rate = pll->input_rate;
rate = pll->input_rate;
if (!clk->div_reg)
return;
return rate;
v = __raw_readl(pll->base + clk->div_reg);
if (v & PLLDIV_EN) {
plldiv = (v & PLLDIV_RATIO_MASK) + 1;
if (plldiv)
clk->rate /= plldiv;
rate /= plldiv;
}
return rate;
}
static void __init clk_pll_init(struct clk *clk)
static unsigned long clk_leafclk_recalc(struct clk *clk)
{
if (WARN_ON(!clk->parent))
return clk->rate;
return clk->parent->rate;
}
static unsigned long clk_pllclk_recalc(struct clk *clk)
{
u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
u8 bypass;
struct pll_data *pll = clk->pll_data;
unsigned long rate = clk->rate;
pll->base = IO_ADDRESS(pll->phys_base);
ctrl = __raw_readl(pll->base + PLLCTL);
clk->rate = pll->input_rate = clk->parent->rate;
rate = pll->input_rate = clk->parent->rate;
if (ctrl & PLLCTL_PLLEN) {
bypass = 0;
@ -255,9 +328,9 @@ static void __init clk_pll_init(struct clk *clk)
}
if (!bypass) {
clk->rate /= prediv;
clk->rate *= mult;
clk->rate /= postdiv;
rate /= prediv;
rate *= mult;
rate /= postdiv;
}
pr_debug("PLL%d: input = %lu MHz [ ",
@ -270,9 +343,91 @@ static void __init clk_pll_init(struct clk *clk)
pr_debug("* %d ", mult);
if (postdiv > 1)
pr_debug("/ %d ", postdiv);
pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000);
pr_debug("] --> %lu MHz output.\n", rate / 1000000);
return rate;
}
/**
* davinci_set_pllrate - set the output rate of a given PLL.
*
* Note: Currently tested to work with OMAP-L138 only.
*
* @pll: pll whose rate needs to be changed.
* @prediv: The pre divider value. Passing 0 disables the pre-divider.
* @pllm: The multiplier value. Passing 0 leads to multiply-by-one.
* @postdiv: The post divider value. Passing 0 disables the post-divider.
*/
int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
unsigned int mult, unsigned int postdiv)
{
u32 ctrl;
unsigned int locktime;
if (pll->base == NULL)
return -EINVAL;
/*
* PLL lock time required per OMAP-L138 datasheet is
* (2000 * prediv)/sqrt(pllm) OSCIN cycles. We approximate sqrt(pllm)
* as 4 and OSCIN cycle as 25 MHz.
*/
if (prediv) {
locktime = ((2000 * prediv) / 100);
prediv = (prediv - 1) | PLLDIV_EN;
} else {
locktime = 20;
}
if (postdiv)
postdiv = (postdiv - 1) | PLLDIV_EN;
if (mult)
mult = mult - 1;
ctrl = __raw_readl(pll->base + PLLCTL);
/* Switch the PLL to bypass mode */
ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN);
__raw_writel(ctrl, pll->base + PLLCTL);
/*
* Wait for 4 OSCIN/CLKIN cycles to ensure that the PLLC has switched
* to bypass mode. Delay of 1us ensures we are good for all > 4MHz
* OSCIN/CLKIN inputs. Typically the input is ~25MHz.
*/
udelay(1);
/* Reset and enable PLL */
ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS);
__raw_writel(ctrl, pll->base + PLLCTL);
if (pll->flags & PLL_HAS_PREDIV)
__raw_writel(prediv, pll->base + PREDIV);
__raw_writel(mult, pll->base + PLLM);
if (pll->flags & PLL_HAS_POSTDIV)
__raw_writel(postdiv, pll->base + POSTDIV);
/*
* Wait for PLL to reset properly, OMAP-L138 datasheet says
* 'min' time = 125ns
*/
udelay(1);
/* Bring PLL out of reset */
ctrl |= PLLCTL_PLLRST;
__raw_writel(ctrl, pll->base + PLLCTL);
udelay(locktime);
/* Remove PLL from bypass mode */
ctrl |= PLLCTL_PLLEN;
__raw_writel(ctrl, pll->base + PLLCTL);
return 0;
}
EXPORT_SYMBOL(davinci_set_pllrate);
int __init davinci_clk_init(struct davinci_clk *clocks)
{
struct davinci_clk *c;
@ -281,12 +436,23 @@ int __init davinci_clk_init(struct davinci_clk *clocks)
for (c = clocks; c->lk.clk; c++) {
clk = c->lk.clk;
if (clk->pll_data)
clk_pll_init(clk);
if (!clk->recalc) {
/* Calculate rates for PLL-derived clocks */
else if (clk->flags & CLK_PLL)
clk_sysclk_recalc(clk);
/* Check if clock is a PLL */
if (clk->pll_data)
clk->recalc = clk_pllclk_recalc;
/* Else, if it is a PLL-derived clock */
else if (clk->flags & CLK_PLL)
clk->recalc = clk_sysclk_recalc;
/* Otherwise, it is a leaf clock (PSC clock) */
else if (clk->parent)
clk->recalc = clk_leafclk_recalc;
}
if (clk->recalc)
clk->rate = clk->recalc(clk);
if (clk->lpsc)
clk->flags |= CLK_PSC;
@ -352,9 +518,8 @@ dump_clock(struct seq_file *s, unsigned nest, struct clk *parent)
/* REVISIT show device associations too */
/* cost is now small, but not linear... */
list_for_each_entry(clk, &clocks, node) {
if (clk->parent == parent)
dump_clock(s, nest + NEST_DELTA, clk);
list_for_each_entry(clk, &parent->children, childnode) {
dump_clock(s, nest + NEST_DELTA, clk);
}
}

View file

@ -22,6 +22,10 @@
/* PLL/Reset register offsets */
#define PLLCTL 0x100
#define PLLCTL_PLLEN BIT(0)
#define PLLCTL_PLLPWRDN BIT(1)
#define PLLCTL_PLLRST BIT(3)
#define PLLCTL_PLLDIS BIT(4)
#define PLLCTL_PLLENSRC BIT(5)
#define PLLCTL_CLKMODE BIT(8)
#define PLLM 0x110
@ -65,15 +69,20 @@ struct clk {
const char *name;
unsigned long rate;
u8 usecount;
u8 flags;
u8 lpsc;
u8 psc_ctlr;
u8 gpsc;
u32 flags;
struct clk *parent;
struct list_head children; /* list of children */
struct list_head childnode; /* parent's child list node */
struct pll_data *pll_data;
u32 div_reg;
unsigned long (*recalc) (struct clk *);
int (*set_rate) (struct clk *clk, unsigned long rate);
int (*round_rate) (struct clk *clk, unsigned long rate);
};
/* Clock flags */
/* Clock flags: SoC-specific flags start at BIT(16) */
#define ALWAYS_ENABLED BIT(1)
#define CLK_PSC BIT(2)
#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */
@ -94,6 +103,8 @@ struct davinci_clk {
}
int davinci_clk_init(struct davinci_clk *clocks);
int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
unsigned int mult, unsigned int postdiv);
extern struct platform_device davinci_wdt_device;

View file

@ -86,6 +86,8 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
dip = davinci_get_id(davinci_soc_info.jtag_id);
if (!dip) {
ret = -EINVAL;
pr_err("Unknown DaVinci JTAG ID 0x%x\n",
davinci_soc_info.jtag_id);
goto err;
}
@ -104,5 +106,5 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
return;
err:
pr_err("davinci_common_init: SoC Initialization failed\n");
panic("davinci_common_init: SoC Initialization failed\n");
}

View file

@ -10,9 +10,6 @@
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>

View file

@ -0,0 +1,226 @@
/*
* CPU frequency scaling for DaVinci
*
* Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
*
* Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows:
*
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
* Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
*
* Copyright (C) 2007-2008 Texas Instruments, Inc.
* Updated to support OMAP3
* Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/types.h>
#include <linux/cpufreq.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <mach/cpufreq.h>
#include <mach/common.h>
#include "clock.h"
struct davinci_cpufreq {
struct device *dev;
struct clk *armclk;
};
static struct davinci_cpufreq cpufreq;
static int davinci_verify_speed(struct cpufreq_policy *policy)
{
struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
struct cpufreq_frequency_table *freq_table = pdata->freq_table;
struct clk *armclk = cpufreq.armclk;
if (freq_table)
return cpufreq_frequency_table_verify(policy, freq_table);
if (policy->cpu)
return -EINVAL;
cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
policy->cpuinfo.max_freq);
policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000;
policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000;
cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
policy->cpuinfo.max_freq);
return 0;
}
static unsigned int davinci_getspeed(unsigned int cpu)
{
if (cpu)
return 0;
return clk_get_rate(cpufreq.armclk) / 1000;
}
static int davinci_target(struct cpufreq_policy *policy,
unsigned int target_freq, unsigned int relation)
{
int ret = 0;
unsigned int idx;
struct cpufreq_freqs freqs;
struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
struct clk *armclk = cpufreq.armclk;
/*
* Ensure desired rate is within allowed range. Some govenors
* (ondemand) will just pass target_freq=0 to get the minimum.
*/
if (target_freq < policy->cpuinfo.min_freq)
target_freq = policy->cpuinfo.min_freq;
if (target_freq > policy->cpuinfo.max_freq)
target_freq = policy->cpuinfo.max_freq;
freqs.old = davinci_getspeed(0);
freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000;
freqs.cpu = 0;
if (freqs.old == freqs.new)
return ret;
cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER,
dev_driver_string(cpufreq.dev),
"transition: %u --> %u\n", freqs.old, freqs.new);
ret = cpufreq_frequency_table_target(policy, pdata->freq_table,
freqs.new, relation, &idx);
if (ret)
return -EINVAL;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
/* if moving to higher frequency, up the voltage beforehand */
if (pdata->set_voltage && freqs.new > freqs.old)
pdata->set_voltage(idx);
ret = clk_set_rate(armclk, idx);
/* if moving to lower freq, lower the voltage after lowering freq */
if (pdata->set_voltage && freqs.new < freqs.old)
pdata->set_voltage(idx);
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
return ret;
}
static int __init davinci_cpu_init(struct cpufreq_policy *policy)
{
int result = 0;
struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
struct cpufreq_frequency_table *freq_table = pdata->freq_table;
if (policy->cpu != 0)
return -EINVAL;
/* Finish platform specific initialization */
if (pdata->init) {
result = pdata->init();
if (result)
return result;
}
policy->cur = policy->min = policy->max = davinci_getspeed(0);
if (freq_table) {
result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
if (!result)
cpufreq_frequency_table_get_attr(freq_table,
policy->cpu);
} else {
policy->cpuinfo.min_freq = policy->min;
policy->cpuinfo.max_freq = policy->max;
}
policy->min = policy->cpuinfo.min_freq;
policy->max = policy->cpuinfo.max_freq;
policy->cur = davinci_getspeed(0);
/*
* Time measurement across the target() function yields ~1500-1800us
* time taken with no drivers on notification list.
* Setting the latency to 2000 us to accomodate addition of drivers
* to pre/post change notification list.
*/
policy->cpuinfo.transition_latency = 2000 * 1000;
return 0;
}
static int davinci_cpu_exit(struct cpufreq_policy *policy)
{
cpufreq_frequency_table_put_attr(policy->cpu);
return 0;
}
static struct freq_attr *davinci_cpufreq_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
static struct cpufreq_driver davinci_driver = {
.flags = CPUFREQ_STICKY,
.verify = davinci_verify_speed,
.target = davinci_target,
.get = davinci_getspeed,
.init = davinci_cpu_init,
.exit = davinci_cpu_exit,
.name = "davinci",
.attr = davinci_cpufreq_attr,
};
static int __init davinci_cpufreq_probe(struct platform_device *pdev)
{
struct davinci_cpufreq_config *pdata = pdev->dev.platform_data;
if (!pdata)
return -EINVAL;
if (!pdata->freq_table)
return -EINVAL;
cpufreq.dev = &pdev->dev;
cpufreq.armclk = clk_get(NULL, "arm");
if (IS_ERR(cpufreq.armclk)) {
dev_err(cpufreq.dev, "Unable to get ARM clock\n");
return PTR_ERR(cpufreq.armclk);
}
return cpufreq_register_driver(&davinci_driver);
}
static int __exit davinci_cpufreq_remove(struct platform_device *pdev)
{
clk_put(cpufreq.armclk);
return cpufreq_unregister_driver(&davinci_driver);
}
static struct platform_driver davinci_cpufreq_driver = {
.driver = {
.name = "cpufreq-davinci",
.owner = THIS_MODULE,
},
.remove = __exit_p(davinci_cpufreq_remove),
};
static int __init davinci_cpufreq_init(void)
{
return platform_driver_probe(&davinci_cpufreq_driver,
davinci_cpufreq_probe);
}
late_initcall(davinci_cpufreq_init);

View file

@ -0,0 +1,197 @@
/*
* CPU idle for DaVinci SoCs
*
* Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/
*
* Derived from Marvell Kirkwood CPU idle code
* (arch/arm/mach-kirkwood/cpuidle.c)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/cpuidle.h>
#include <linux/io.h>
#include <asm/proc-fns.h>
#include <mach/cpuidle.h>
#define DAVINCI_CPUIDLE_MAX_STATES 2
struct davinci_ops {
void (*enter) (u32 flags);
void (*exit) (u32 flags);
u32 flags;
};
/* fields in davinci_ops.flags */
#define DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN BIT(0)
static struct cpuidle_driver davinci_idle_driver = {
.name = "cpuidle-davinci",
.owner = THIS_MODULE,
};
static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device);
static void __iomem *ddr2_reg_base;
#define DDR2_SDRCR_OFFSET 0xc
#define DDR2_SRPD_BIT BIT(23)
#define DDR2_LPMODEN_BIT BIT(31)
static void davinci_save_ddr_power(int enter, bool pdown)
{
u32 val;
val = __raw_readl(ddr2_reg_base + DDR2_SDRCR_OFFSET);
if (enter) {
if (pdown)
val |= DDR2_SRPD_BIT;
else
val &= ~DDR2_SRPD_BIT;
val |= DDR2_LPMODEN_BIT;
} else {
val &= ~(DDR2_SRPD_BIT | DDR2_LPMODEN_BIT);
}
__raw_writel(val, ddr2_reg_base + DDR2_SDRCR_OFFSET);
}
static void davinci_c2state_enter(u32 flags)
{
davinci_save_ddr_power(1, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN));
}
static void davinci_c2state_exit(u32 flags)
{
davinci_save_ddr_power(0, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN));
}
static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = {
[1] = {
.enter = davinci_c2state_enter,
.exit = davinci_c2state_exit,
},
};
/* Actual code that puts the SoC in different idle states */
static int davinci_enter_idle(struct cpuidle_device *dev,
struct cpuidle_state *state)
{
struct davinci_ops *ops = cpuidle_get_statedata(state);
struct timeval before, after;
int idle_time;
local_irq_disable();
do_gettimeofday(&before);
if (ops && ops->enter)
ops->enter(ops->flags);
/* Wait for interrupt state */
cpu_do_idle();
if (ops && ops->exit)
ops->exit(ops->flags);
do_gettimeofday(&after);
local_irq_enable();
idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
(after.tv_usec - before.tv_usec);
return idle_time;
}
static int __init davinci_cpuidle_probe(struct platform_device *pdev)
{
int ret;
struct cpuidle_device *device;
struct davinci_cpuidle_config *pdata = pdev->dev.platform_data;
struct resource *ddr2_regs;
resource_size_t len;
device = &per_cpu(davinci_cpuidle_device, smp_processor_id());
if (!pdata) {
dev_err(&pdev->dev, "cannot get platform data\n");
return -ENOENT;
}
ddr2_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!ddr2_regs) {
dev_err(&pdev->dev, "cannot get DDR2 controller register base");
return -ENODEV;
}
len = resource_size(ddr2_regs);
ddr2_regs = request_mem_region(ddr2_regs->start, len, ddr2_regs->name);
if (!ddr2_regs)
return -EBUSY;
ddr2_reg_base = ioremap(ddr2_regs->start, len);
if (!ddr2_reg_base) {
ret = -ENOMEM;
goto ioremap_fail;
}
ret = cpuidle_register_driver(&davinci_idle_driver);
if (ret) {
dev_err(&pdev->dev, "failed to register driver\n");
goto driver_register_fail;
}
/* Wait for interrupt state */
device->states[0].enter = davinci_enter_idle;
device->states[0].exit_latency = 1;
device->states[0].target_residency = 10000;
device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
strcpy(device->states[0].name, "WFI");
strcpy(device->states[0].desc, "Wait for interrupt");
/* Wait for interrupt and DDR self refresh state */
device->states[1].enter = davinci_enter_idle;
device->states[1].exit_latency = 10;
device->states[1].target_residency = 10000;
device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
strcpy(device->states[1].name, "DDR SR");
strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
if (pdata->ddr2_pdown)
davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN;
cpuidle_set_statedata(&device->states[1], &davinci_states[1]);
device->state_count = DAVINCI_CPUIDLE_MAX_STATES;
ret = cpuidle_register_device(device);
if (ret) {
dev_err(&pdev->dev, "failed to register device\n");
goto device_register_fail;
}
return 0;
device_register_fail:
cpuidle_unregister_driver(&davinci_idle_driver);
driver_register_fail:
iounmap(ddr2_reg_base);
ioremap_fail:
release_mem_region(ddr2_regs->start, len);
return ret;
}
static struct platform_driver davinci_cpuidle_driver = {
.driver = {
.name = "cpuidle-davinci",
.owner = THIS_MODULE,
},
};
static int __init davinci_cpuidle_init(void)
{
return platform_driver_probe(&davinci_cpuidle_driver,
davinci_cpuidle_probe);
}
device_initcall(davinci_cpuidle_init);

View file

@ -8,22 +8,17 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <asm/mach/map.h>
#include <mach/clock.h>
#include <mach/psc.h>
#include <mach/mux.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/common.h>
#include <mach/time.h>
#include <mach/da8xx.h>
#include <mach/asp.h>
#include "clock.h"
#include "mux.h"
@ -193,14 +188,14 @@ static struct clk uart1_clk = {
.name = "uart1",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_UART1,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk uart2_clk = {
.name = "uart2",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_UART2,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk spi0_clk = {
@ -213,98 +208,98 @@ static struct clk spi1_clk = {
.name = "spi1",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_SPI1,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk ecap0_clk = {
.name = "ecap0",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_ECAP,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk ecap1_clk = {
.name = "ecap1",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_ECAP,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk ecap2_clk = {
.name = "ecap2",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_ECAP,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk pwm0_clk = {
.name = "pwm0",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_PWM,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk pwm1_clk = {
.name = "pwm1",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_PWM,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk pwm2_clk = {
.name = "pwm2",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_PWM,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk eqep0_clk = {
.name = "eqep0",
.parent = &pll0_sysclk2,
.lpsc = DA830_LPSC1_EQEP,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk eqep1_clk = {
.name = "eqep1",
.parent = &pll0_sysclk2,
.lpsc = DA830_LPSC1_EQEP,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk lcdc_clk = {
.name = "lcdc",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_LCDC,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk mcasp0_clk = {
.name = "mcasp0",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_McASP0,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk mcasp1_clk = {
.name = "mcasp1",
.parent = &pll0_sysclk2,
.lpsc = DA830_LPSC1_McASP1,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk mcasp2_clk = {
.name = "mcasp2",
.parent = &pll0_sysclk2,
.lpsc = DA830_LPSC1_McASP2,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk usb20_clk = {
.name = "usb20",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_USB20,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk aemif_clk = {
@ -332,36 +327,36 @@ static struct clk emac_clk = {
.name = "emac",
.parent = &pll0_sysclk4,
.lpsc = DA8XX_LPSC1_CPGMAC,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk gpio_clk = {
.name = "gpio",
.parent = &pll0_sysclk4,
.lpsc = DA8XX_LPSC1_GPIO,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk i2c1_clk = {
.name = "i2c1",
.parent = &pll0_sysclk4,
.lpsc = DA8XX_LPSC1_I2C,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk usb11_clk = {
.name = "usb11",
.parent = &pll0_sysclk4,
.lpsc = DA8XX_LPSC1_USB11,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk emif3_clk = {
.name = "emif3",
.parent = &pll0_sysclk5,
.lpsc = DA8XX_LPSC1_EMIF3C,
.gpsc = 1,
.flags = ALWAYS_ENABLED,
.psc_ctlr = 1,
};
static struct clk arm_clk = {
@ -411,7 +406,7 @@ static struct davinci_clk da830_clks[] = {
CLK(NULL, "pwm2", &pwm2_clk),
CLK("eqep.0", NULL, &eqep0_clk),
CLK("eqep.1", NULL, &eqep1_clk),
CLK("da830_lcdc", NULL, &lcdc_clk),
CLK("da8xx_lcdc.0", NULL, &lcdc_clk),
CLK("davinci-mcasp.0", NULL, &mcasp0_clk),
CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
CLK("davinci-mcasp.2", NULL, &mcasp2_clk),
@ -1143,7 +1138,21 @@ static struct davinci_id da830_ids[] = {
.part_no = 0xb7df,
.manufacturer = 0x017, /* 0x02f >> 1 */
.cpu_id = DAVINCI_CPU_ID_DA830,
.name = "da830/omap l137",
.name = "da830/omap-l137 rev1.0",
},
{
.variant = 0x8,
.part_no = 0xb7df,
.manufacturer = 0x017,
.cpu_id = DAVINCI_CPU_ID_DA830,
.name = "da830/omap-l137 rev1.1",
},
{
.variant = 0x9,
.part_no = 0xb7df,
.manufacturer = 0x017,
.cpu_id = DAVINCI_CPU_ID_DA830,
.name = "da830/omap-l137 rev2.0",
},
};
@ -1178,13 +1187,11 @@ static struct davinci_timer_info da830_timer_info = {
static struct davinci_soc_info davinci_soc_info_da830 = {
.io_desc = da830_io_desc,
.io_desc_num = ARRAY_SIZE(da830_io_desc),
.jtag_id_base = IO_ADDRESS(DA8XX_JTAG_ID_REG),
.ids = da830_ids,
.ids_num = ARRAY_SIZE(da830_ids),
.cpu_clks = da830_clks,
.psc_bases = da830_psc_bases,
.psc_bases_num = ARRAY_SIZE(da830_psc_bases),
.pinmux_base = IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120),
.pinmux_pins = da830_pins,
.pinmux_pins_num = ARRAY_SIZE(da830_pins),
.intc_base = (void __iomem *)DA8XX_CP_INTC_VIRT,
@ -1201,5 +1208,13 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
void __init da830_init(void)
{
da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
return;
davinci_soc_info_da830.jtag_id_base =
DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG);
davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
davinci_common_init(&davinci_soc_info_da830);
}

View file

@ -11,31 +11,41 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/cpufreq.h>
#include <linux/regulator/consumer.h>
#include <asm/mach/map.h>
#include <mach/clock.h>
#include <mach/psc.h>
#include <mach/mux.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/common.h>
#include <mach/time.h>
#include <mach/da8xx.h>
#include <mach/cpufreq.h>
#include "clock.h"
#include "mux.h"
/* SoC specific clock flags */
#define DA850_CLK_ASYNC3 BIT(16)
#define DA850_PLL1_BASE 0x01e1a000
#define DA850_TIMER64P2_BASE 0x01f0c000
#define DA850_TIMER64P3_BASE 0x01f0d000
#define DA850_REF_FREQ 24000000
#define CFGCHIP3_ASYNC3_CLKSRC BIT(4)
#define CFGCHIP0_PLL_MASTER_LOCK BIT(4)
static int da850_set_armrate(struct clk *clk, unsigned long rate);
static int da850_round_armrate(struct clk *clk, unsigned long rate);
static int da850_set_pll0rate(struct clk *clk, unsigned long armrate);
static struct pll_data pll0_data = {
.num = 1,
.phys_base = DA8XX_PLL0_BASE,
@ -52,6 +62,7 @@ static struct clk pll0_clk = {
.parent = &ref_clk,
.pll_data = &pll0_data,
.flags = CLK_PLL,
.set_rate = da850_set_pll0rate,
};
static struct clk pll0_aux_clk = {
@ -210,16 +221,16 @@ static struct clk tpcc1_clk = {
.name = "tpcc1",
.parent = &pll0_sysclk2,
.lpsc = DA850_LPSC1_TPCC1,
.gpsc = 1,
.flags = CLK_PSC | ALWAYS_ENABLED,
.psc_ctlr = 1,
};
static struct clk tptc2_clk = {
.name = "tptc2",
.parent = &pll0_sysclk2,
.lpsc = DA850_LPSC1_TPTC2,
.gpsc = 1,
.flags = ALWAYS_ENABLED,
.psc_ctlr = 1,
};
static struct clk uart0_clk = {
@ -232,14 +243,16 @@ static struct clk uart1_clk = {
.name = "uart1",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_UART1,
.psc_ctlr = 1,
.gpsc = 1,
.flags = DA850_CLK_ASYNC3,
};
static struct clk uart2_clk = {
.name = "uart2",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_UART2,
.psc_ctlr = 1,
.gpsc = 1,
.flags = DA850_CLK_ASYNC3,
};
static struct clk aintc_clk = {
@ -253,22 +266,22 @@ static struct clk gpio_clk = {
.name = "gpio",
.parent = &pll0_sysclk4,
.lpsc = DA8XX_LPSC1_GPIO,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk i2c1_clk = {
.name = "i2c1",
.parent = &pll0_sysclk4,
.lpsc = DA8XX_LPSC1_I2C,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk emif3_clk = {
.name = "emif3",
.parent = &pll0_sysclk5,
.lpsc = DA8XX_LPSC1_EMIF3C,
.gpsc = 1,
.flags = ALWAYS_ENABLED,
.psc_ctlr = 1,
};
static struct clk arm_clk = {
@ -276,6 +289,8 @@ static struct clk arm_clk = {
.parent = &pll0_sysclk6,
.lpsc = DA8XX_LPSC0_ARM,
.flags = ALWAYS_ENABLED,
.set_rate = da850_set_armrate,
.round_rate = da850_round_armrate,
};
static struct clk rmii_clk = {
@ -287,21 +302,22 @@ static struct clk emac_clk = {
.name = "emac",
.parent = &pll0_sysclk4,
.lpsc = DA8XX_LPSC1_CPGMAC,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk mcasp_clk = {
.name = "mcasp",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_McASP0,
.psc_ctlr = 1,
.gpsc = 1,
.flags = DA850_CLK_ASYNC3,
};
static struct clk lcdc_clk = {
.name = "lcdc",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_LCDC,
.psc_ctlr = 1,
.gpsc = 1,
};
static struct clk mmcsd_clk = {
@ -404,6 +420,14 @@ static const struct mux_config da850_pins[] = {
MUX_CFG(DA850, MII_RXD_0, 3, 28, 15, 8, false)
MUX_CFG(DA850, MDIO_CLK, 4, 0, 15, 8, false)
MUX_CFG(DA850, MDIO_D, 4, 4, 15, 8, false)
MUX_CFG(DA850, RMII_TXD_0, 14, 12, 15, 8, false)
MUX_CFG(DA850, RMII_TXD_1, 14, 8, 15, 8, false)
MUX_CFG(DA850, RMII_TXEN, 14, 16, 15, 8, false)
MUX_CFG(DA850, RMII_CRS_DV, 15, 4, 15, 8, false)
MUX_CFG(DA850, RMII_RXD_0, 14, 24, 15, 8, false)
MUX_CFG(DA850, RMII_RXD_1, 14, 20, 15, 8, false)
MUX_CFG(DA850, RMII_RXER, 14, 28, 15, 8, false)
MUX_CFG(DA850, RMII_MHZ_50_CLK, 15, 0, 15, 0, false)
/* McASP function */
MUX_CFG(DA850, ACLKR, 0, 0, 15, 1, false)
MUX_CFG(DA850, ACLKX, 0, 4, 15, 1, false)
@ -506,8 +530,9 @@ static const struct mux_config da850_pins[] = {
MUX_CFG(DA850, EMA_WAIT_1, 6, 24, 15, 1, false)
MUX_CFG(DA850, NEMA_CS_2, 7, 0, 15, 1, false)
/* GPIO function */
MUX_CFG(DA850, GPIO2_6, 6, 4, 15, 8, false)
MUX_CFG(DA850, GPIO2_8, 5, 28, 15, 8, false)
MUX_CFG(DA850, GPIO2_15, 5, 0, 15, 8, false)
MUX_CFG(DA850, GPIO8_10, 18, 28, 15, 8, false)
MUX_CFG(DA850, GPIO4_0, 10, 28, 15, 8, false)
MUX_CFG(DA850, GPIO4_1, 10, 24, 15, 8, false)
#endif
@ -547,6 +572,14 @@ const short da850_cpgmac_pins[] __initdata = {
-1
};
const short da850_rmii_pins[] __initdata = {
DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
DA850_MDIO_D,
-1
};
const short da850_mcasp_pins[] __initdata = {
DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE,
@ -555,12 +588,11 @@ const short da850_mcasp_pins[] __initdata = {
};
const short da850_lcdcntl_pins[] __initdata = {
DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, DA850_LCD_D_4,
DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, DA850_LCD_D_8,
DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, DA850_LCD_D_12,
DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15, DA850_LCD_PCLK,
DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS, DA850_GPIO2_15,
DA850_GPIO8_10,
DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3,
DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7,
DA850_LCD_D_8, DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11,
DA850_LCD_D_12, DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15,
DA850_LCD_PCLK, DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS,
-1
};
@ -790,16 +822,221 @@ static struct davinci_timer_info da850_timer_info = {
.clocksource_id = T0_TOP,
};
static void da850_set_async3_src(int pllnum)
{
struct clk *clk, *newparent = pllnum ? &pll1_sysclk2 : &pll0_sysclk2;
struct davinci_clk *c;
unsigned int v;
int ret;
for (c = da850_clks; c->lk.clk; c++) {
clk = c->lk.clk;
if (clk->flags & DA850_CLK_ASYNC3) {
ret = clk_set_parent(clk, newparent);
WARN(ret, "DA850: unable to re-parent clock %s",
clk->name);
}
}
v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
if (pllnum)
v |= CFGCHIP3_ASYNC3_CLKSRC;
else
v &= ~CFGCHIP3_ASYNC3_CLKSRC;
__raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
}
#ifdef CONFIG_CPU_FREQ
/*
* Notes:
* According to the TRM, minimum PLLM results in maximum power savings.
* The OPP definitions below should keep the PLLM as low as possible.
*
* The output of the PLLM must be between 400 to 600 MHz.
* This rules out prediv of anything but divide-by-one for 24Mhz OSC input.
*/
struct da850_opp {
unsigned int freq; /* in KHz */
unsigned int prediv;
unsigned int mult;
unsigned int postdiv;
unsigned int cvdd_min; /* in uV */
unsigned int cvdd_max; /* in uV */
};
static const struct da850_opp da850_opp_300 = {
.freq = 300000,
.prediv = 1,
.mult = 25,
.postdiv = 2,
.cvdd_min = 1140000,
.cvdd_max = 1320000,
};
static const struct da850_opp da850_opp_200 = {
.freq = 200000,
.prediv = 1,
.mult = 25,
.postdiv = 3,
.cvdd_min = 1050000,
.cvdd_max = 1160000,
};
static const struct da850_opp da850_opp_96 = {
.freq = 96000,
.prediv = 1,
.mult = 20,
.postdiv = 5,
.cvdd_min = 950000,
.cvdd_max = 1050000,
};
#define OPP(freq) \
{ \
.index = (unsigned int) &da850_opp_##freq, \
.frequency = freq * 1000, \
}
static struct cpufreq_frequency_table da850_freq_table[] = {
OPP(300),
OPP(200),
OPP(96),
{
.index = 0,
.frequency = CPUFREQ_TABLE_END,
},
};
#ifdef CONFIG_REGULATOR
static struct regulator *cvdd;
static int da850_set_voltage(unsigned int index)
{
struct da850_opp *opp;
if (!cvdd)
return -ENODEV;
opp = (struct da850_opp *) da850_freq_table[index].index;
return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max);
}
static int da850_regulator_init(void)
{
cvdd = regulator_get(NULL, "cvdd");
if (WARN(IS_ERR(cvdd), "Unable to obtain voltage regulator for CVDD;"
" voltage scaling unsupported\n")) {
return PTR_ERR(cvdd);
}
return 0;
}
#endif
static struct davinci_cpufreq_config cpufreq_info = {
.freq_table = &da850_freq_table[0],
#ifdef CONFIG_REGULATOR
.init = da850_regulator_init,
.set_voltage = da850_set_voltage,
#endif
};
static struct platform_device da850_cpufreq_device = {
.name = "cpufreq-davinci",
.dev = {
.platform_data = &cpufreq_info,
},
};
int __init da850_register_cpufreq(void)
{
return platform_device_register(&da850_cpufreq_device);
}
static int da850_round_armrate(struct clk *clk, unsigned long rate)
{
int i, ret = 0, diff;
unsigned int best = (unsigned int) -1;
rate /= 1000; /* convert to kHz */
for (i = 0; da850_freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
diff = da850_freq_table[i].frequency - rate;
if (diff < 0)
diff = -diff;
if (diff < best) {
best = diff;
ret = da850_freq_table[i].frequency;
}
}
return ret * 1000;
}
static int da850_set_armrate(struct clk *clk, unsigned long index)
{
struct clk *pllclk = &pll0_clk;
return clk_set_rate(pllclk, index);
}
static int da850_set_pll0rate(struct clk *clk, unsigned long index)
{
unsigned int prediv, mult, postdiv;
struct da850_opp *opp;
struct pll_data *pll = clk->pll_data;
unsigned int v;
int ret;
opp = (struct da850_opp *) da850_freq_table[index].index;
prediv = opp->prediv;
mult = opp->mult;
postdiv = opp->postdiv;
/* Unlock writing to PLL registers */
v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG));
v &= ~CFGCHIP0_PLL_MASTER_LOCK;
__raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG));
ret = davinci_set_pllrate(pll, prediv, mult, postdiv);
if (WARN_ON(ret))
return ret;
return 0;
}
#else
int __init da850_register_cpufreq(void)
{
return 0;
}
static int da850_set_armrate(struct clk *clk, unsigned long rate)
{
return -EINVAL;
}
static int da850_set_pll0rate(struct clk *clk, unsigned long armrate)
{
return -EINVAL;
}
static int da850_round_armrate(struct clk *clk, unsigned long rate)
{
return clk->rate;
}
#endif
static struct davinci_soc_info davinci_soc_info_da850 = {
.io_desc = da850_io_desc,
.io_desc_num = ARRAY_SIZE(da850_io_desc),
.jtag_id_base = IO_ADDRESS(DA8XX_JTAG_ID_REG),
.ids = da850_ids,
.ids_num = ARRAY_SIZE(da850_ids),
.cpu_clks = da850_clks,
.psc_bases = da850_psc_bases,
.psc_bases_num = ARRAY_SIZE(da850_psc_bases),
.pinmux_base = IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120),
.pinmux_pins = da850_pins,
.pinmux_pins_num = ARRAY_SIZE(da850_pins),
.intc_base = (void __iomem *)DA8XX_CP_INTC_VIRT,
@ -816,5 +1053,22 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
void __init da850_init(void)
{
da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
return;
davinci_soc_info_da850.jtag_id_base =
DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG);
davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
davinci_common_init(&davinci_soc_info_da850);
/*
* Move the clock source of Async3 domain to PLL1 SYSCLK2.
* This helps keeping the peripherals on this domain insulated
* from CPU frequency changes caused by DVFS. The firmware sets
* both PLL0 and PLL1 to the same frequency so, there should not
* be any noticible change even in non-DVFS use cases.
*/
da850_set_async3_src(1);
}

View file

@ -10,8 +10,6 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
@ -21,7 +19,7 @@
#include <mach/common.h>
#include <mach/time.h>
#include <mach/da8xx.h>
#include <video/da8xx-fb.h>
#include <mach/cpuidle.h>
#include "clock.h"
@ -30,6 +28,7 @@
#define DA8XX_TPTC1_BASE 0x01c08400
#define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */
#define DA8XX_I2C0_BASE 0x01c22000
#define DA8XX_RTC_BASE 0x01C23000
#define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000
#define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000
#define DA8XX_EMAC_CPGMAC_BASE 0x01e23000
@ -43,6 +42,8 @@
#define DA8XX_MDIO_REG_OFFSET 0x4000
#define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K
void __iomem *da8xx_syscfg_base;
static struct plat_serial8250_port da8xx_serial_pdata[] = {
{
.mapbase = DA8XX_UART0_BASE,
@ -282,6 +283,11 @@ static struct platform_device da8xx_emac_device = {
.resource = da8xx_emac_resources,
};
int __init da8xx_register_emac(void)
{
return platform_device_register(&da8xx_emac_device);
}
static struct resource da830_mcasp1_resources[] = {
{
.name = "mcasp1",
@ -338,12 +344,7 @@ static struct platform_device da850_mcasp_device = {
.resource = da850_mcasp_resources,
};
int __init da8xx_register_emac(void)
{
return platform_device_register(&da8xx_emac_device);
}
void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata)
void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
{
/* DA830/OMAP-L137 has 3 instances of McASP */
if (cpu_is_davinci_da830() && id == 1) {
@ -379,10 +380,16 @@ static struct lcd_ctrl_config lcd_cfg = {
.raster_order = 0,
};
static struct da8xx_lcdc_platform_data da850_evm_lcdc_pdata = {
.manu_name = "sharp",
.controller_data = &lcd_cfg,
.type = "Sharp_LK043T1DG01",
struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata = {
.manu_name = "sharp",
.controller_data = &lcd_cfg,
.type = "Sharp_LCD035Q3DG01",
};
struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata = {
.manu_name = "sharp",
.controller_data = &lcd_cfg,
.type = "Sharp_LK043T1DG01",
};
static struct resource da8xx_lcdc_resources[] = {
@ -398,19 +405,17 @@ static struct resource da8xx_lcdc_resources[] = {
},
};
static struct platform_device da850_lcdc_device = {
static struct platform_device da8xx_lcdc_device = {
.name = "da8xx_lcdc",
.id = 0,
.num_resources = ARRAY_SIZE(da8xx_lcdc_resources),
.resource = da8xx_lcdc_resources,
.dev = {
.platform_data = &da850_evm_lcdc_pdata,
}
};
int __init da8xx_register_lcdc(void)
int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata)
{
return platform_device_register(&da850_lcdc_device);
da8xx_lcdc_device.dev.platform_data = pdata;
return platform_device_register(&da8xx_lcdc_device);
}
static struct resource da8xx_mmcsd0_resources[] = {
@ -448,3 +453,66 @@ int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config)
da8xx_mmcsd0_device.dev.platform_data = config;
return platform_device_register(&da8xx_mmcsd0_device);
}
static struct resource da8xx_rtc_resources[] = {
{
.start = DA8XX_RTC_BASE,
.end = DA8XX_RTC_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
{ /* timer irq */
.start = IRQ_DA8XX_RTC,
.end = IRQ_DA8XX_RTC,
.flags = IORESOURCE_IRQ,
},
{ /* alarm irq */
.start = IRQ_DA8XX_RTC,
.end = IRQ_DA8XX_RTC,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device da8xx_rtc_device = {
.name = "omap_rtc",
.id = -1,
.num_resources = ARRAY_SIZE(da8xx_rtc_resources),
.resource = da8xx_rtc_resources,
};
int da8xx_register_rtc(void)
{
/* Unlock the rtc's registers */
__raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c));
__raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70));
return platform_device_register(&da8xx_rtc_device);
}
static struct resource da8xx_cpuidle_resources[] = {
{
.start = DA8XX_DDR2_CTL_BASE,
.end = DA8XX_DDR2_CTL_BASE + SZ_32K - 1,
.flags = IORESOURCE_MEM,
},
};
/* DA8XX devices support DDR2 power down */
static struct davinci_cpuidle_config da8xx_cpuidle_pdata = {
.ddr2_pdown = 1,
};
static struct platform_device da8xx_cpuidle_device = {
.name = "cpuidle-davinci",
.num_resources = ARRAY_SIZE(da8xx_cpuidle_resources),
.resource = da8xx_cpuidle_resources,
.dev = {
.platform_data = &da8xx_cpuidle_pdata,
},
};
int __init da8xx_register_cpuidle(void)
{
return platform_device_register(&da8xx_cpuidle_device);
}

View file

@ -9,15 +9,11 @@
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/irqs.h>
@ -177,7 +173,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
SZ_4K - 1;
mmcsd0_resources[2].start = IRQ_DM365_SDIOINT1;
mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1;
} else
break;

View file

@ -8,7 +8,6 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/serial_8250.h>
@ -21,7 +20,6 @@
#include <asm/mach/map.h>
#include <mach/dm355.h>
#include <mach/clock.h>
#include <mach/cputype.h>
#include <mach/edma.h>
#include <mach/psc.h>

View file

@ -12,7 +12,6 @@
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/serial_8250.h>
@ -23,7 +22,6 @@
#include <asm/mach/map.h>
#include <mach/dm365.h>
#include <mach/clock.h>
#include <mach/cputype.h>
#include <mach/edma.h>
#include <mach/psc.h>
@ -32,6 +30,8 @@
#include <mach/time.h>
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
#include <mach/keyscan.h>
#include "clock.h"
#include "mux.h"
@ -369,7 +369,7 @@ static struct clk timer3_clk = {
static struct clk usb_clk = {
.name = "usb",
.parent = &pll2_sysclk1,
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_USB,
};
@ -456,7 +456,7 @@ static struct davinci_clk dm365_clks[] = {
CLK(NULL, "usb", &usb_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
CLK("voice_codec", NULL, &voicecodec_clk),
CLK("soc-audio.0", NULL, &asp0_clk),
CLK("davinci-asp.0", NULL, &asp0_clk),
CLK(NULL, "rto", &rto_clk),
CLK(NULL, "mjcp", &mjcp_clk),
CLK(NULL, NULL, NULL),
@ -531,7 +531,7 @@ MUX_CFG(DM365, EMAC_CRS, 3, 2, 1, 1, false)
MUX_CFG(DM365, EMAC_MDIO, 3, 1, 1, 1, false)
MUX_CFG(DM365, EMAC_MDCLK, 3, 0, 1, 1, false)
MUX_CFG(DM365, KEYPAD, 2, 0, 0x3f, 0x3f, false)
MUX_CFG(DM365, KEYSCAN, 2, 0, 0x3f, 0x3f, false)
MUX_CFG(DM365, PWM0, 1, 0, 3, 2, false)
MUX_CFG(DM365, PWM0_G23, 3, 26, 3, 3, false)
@ -603,6 +603,9 @@ INT_CFG(DM365, INT_IMX1_ENABLE, 24, 1, 1, false)
INT_CFG(DM365, INT_IMX1_DISABLE, 24, 1, 0, false)
INT_CFG(DM365, INT_NSF_ENABLE, 25, 1, 1, false)
INT_CFG(DM365, INT_NSF_DISABLE, 25, 1, 0, false)
EVT_CFG(DM365, EVT2_ASP_TX, 0, 1, 0, false)
EVT_CFG(DM365, EVT3_ASP_RX, 1, 1, 0, false)
#endif
};
@ -696,6 +699,7 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
[IRQ_I2C] = 3,
[IRQ_UARTINT0] = 3,
[IRQ_UARTINT1] = 3,
[IRQ_DM365_RTCINT] = 3,
[IRQ_DM365_SPIINT0_0] = 3,
[IRQ_DM365_SPIINT3_0] = 3,
[IRQ_DM365_GPIO0] = 3,
@ -806,6 +810,50 @@ static struct platform_device dm365_edma_device = {
.resource = edma_resources,
};
static struct resource dm365_asp_resources[] = {
{
.start = DAVINCI_DM365_ASP0_BASE,
.end = DAVINCI_DM365_ASP0_BASE + SZ_8K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = DAVINCI_DMA_ASP0_TX,
.end = DAVINCI_DMA_ASP0_TX,
.flags = IORESOURCE_DMA,
},
{
.start = DAVINCI_DMA_ASP0_RX,
.end = DAVINCI_DMA_ASP0_RX,
.flags = IORESOURCE_DMA,
},
};
static struct platform_device dm365_asp_device = {
.name = "davinci-asp",
.id = 0,
.num_resources = ARRAY_SIZE(dm365_asp_resources),
.resource = dm365_asp_resources,
};
static struct resource dm365_rtc_resources[] = {
{
.start = DM365_RTC_BASE,
.end = DM365_RTC_BASE + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_DM365_RTCINT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dm365_rtc_device = {
.name = "rtc_davinci",
.id = 0,
.num_resources = ARRAY_SIZE(dm365_rtc_resources),
.resource = dm365_rtc_resources,
};
static struct map_desc dm365_io_desc[] = {
{
.virtual = IO_VIRT,
@ -822,6 +870,28 @@ static struct map_desc dm365_io_desc[] = {
},
};
static struct resource dm365_ks_resources[] = {
{
/* registers */
.start = DM365_KEYSCAN_BASE,
.end = DM365_KEYSCAN_BASE + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
/* interrupt */
.start = IRQ_DM365_KEYINT,
.end = IRQ_DM365_KEYINT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dm365_ks_device = {
.name = "davinci_keyscan",
.id = 0,
.num_resources = ARRAY_SIZE(dm365_ks_resources),
.resource = dm365_ks_resources,
};
/* Contents of JTAG ID register used to identify exact cpu type */
static struct davinci_id dm365_ids[] = {
{
@ -907,6 +977,33 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
.sram_len = SZ_32K,
};
void __init dm365_init_asp(struct snd_platform_data *pdata)
{
davinci_cfg_reg(DM365_MCBSP0_BDX);
davinci_cfg_reg(DM365_MCBSP0_X);
davinci_cfg_reg(DM365_MCBSP0_BFSX);
davinci_cfg_reg(DM365_MCBSP0_BDR);
davinci_cfg_reg(DM365_MCBSP0_R);
davinci_cfg_reg(DM365_MCBSP0_BFSR);
davinci_cfg_reg(DM365_EVT2_ASP_TX);
davinci_cfg_reg(DM365_EVT3_ASP_RX);
dm365_asp_device.dev.platform_data = pdata;
platform_device_register(&dm365_asp_device);
}
void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
{
davinci_cfg_reg(DM365_KEYSCAN);
dm365_ks_device.dev.platform_data = pdata;
platform_device_register(&dm365_ks_device);
}
void __init dm365_init_rtc(void)
{
davinci_cfg_reg(DM365_INT_PRTCSS);
platform_device_register(&dm365_rtc_device);
}
void __init dm365_init(void)
{
davinci_common_init(&davinci_soc_info_dm365);

View file

@ -8,7 +8,6 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/serial_8250.h>
@ -18,7 +17,6 @@
#include <asm/mach/map.h>
#include <mach/dm644x.h>
#include <mach/clock.h>
#include <mach/cputype.h>
#include <mach/edma.h>
#include <mach/irqs.h>
@ -370,6 +368,11 @@ MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true)
MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true)
MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true)
MUX_CFG(DM644X, AEAW0, 0, 0, 1, 0, true)
MUX_CFG(DM644X, AEAW1, 0, 1, 1, 0, true)
MUX_CFG(DM644X, AEAW2, 0, 2, 1, 0, true)
MUX_CFG(DM644X, AEAW3, 0, 3, 1, 0, true)
MUX_CFG(DM644X, AEAW4, 0, 4, 1, 0, true)
MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false)

View file

@ -8,7 +8,6 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/serial_8250.h>
@ -18,7 +17,6 @@
#include <asm/mach/map.h>
#include <mach/dm646x.h>
#include <mach/clock.h>
#include <mach/cputype.h>
#include <mach/edma.h>
#include <mach/irqs.h>
@ -789,7 +787,14 @@ static struct davinci_id dm646x_ids[] = {
.part_no = 0xb770,
.manufacturer = 0x017,
.cpu_id = DAVINCI_CPU_ID_DM6467,
.name = "dm6467",
.name = "dm6467_rev1.x",
},
{
.variant = 0x1,
.part_no = 0xb770,
.manufacturer = 0x017,
.cpu_id = DAVINCI_CPU_ID_DM6467,
.name = "dm6467_rev3.x",
},
};

View file

@ -18,22 +18,13 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/compiler.h>
#include <linux/io.h>
#include <mach/cputype.h>
#include <mach/memory.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/edma.h>
#include <mach/mux.h>
/* Offsets matching "struct edmacc_param" */
#define PARM_OPT 0x00
@ -509,43 +500,59 @@ static irqreturn_t dma_tc1err_handler(int irq, void *data)
return IRQ_HANDLED;
}
static int reserve_contiguous_params(int ctlr, unsigned int id,
unsigned int num_params,
unsigned int start_param)
static int reserve_contiguous_slots(int ctlr, unsigned int id,
unsigned int num_slots,
unsigned int start_slot)
{
int i, j;
unsigned int count = num_params;
unsigned int count = num_slots;
int stop_slot = start_slot;
DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY);
for (i = start_param; i < edma_info[ctlr]->num_slots; ++i) {
for (i = start_slot; i < edma_info[ctlr]->num_slots; ++i) {
j = EDMA_CHAN_SLOT(i);
if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse))
if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse)) {
/* Record our current beginning slot */
if (count == num_slots)
stop_slot = i;
count--;
set_bit(j, tmp_inuse);
if (count == 0)
break;
else if (id == EDMA_CONT_PARAMS_FIXED_EXACT)
break;
else
count = num_params;
} else {
clear_bit(j, tmp_inuse);
if (id == EDMA_CONT_PARAMS_FIXED_EXACT) {
stop_slot = i;
break;
} else
count = num_slots;
}
}
/*
* We have to clear any bits that we set
* if we run out parameter RAMs, i.e we do find a set
* of contiguous parameter RAMs but do not find the exact number
* requested as we may reach the total number of parameter RAMs
* if we run out parameter RAM slots, i.e we do find a set
* of contiguous parameter RAM slots but do not find the exact number
* requested as we may reach the total number of parameter RAM slots
*/
if (count) {
for (j = i - num_params + count + 1; j <= i ; ++j)
if (i == edma_info[ctlr]->num_slots)
stop_slot = i;
for (j = start_slot; j < stop_slot; j++)
if (test_bit(j, tmp_inuse))
clear_bit(j, edma_info[ctlr]->edma_inuse);
if (count)
return -EBUSY;
}
for (j = i - num_params + 1; j <= i; ++j)
for (j = i - num_slots + 1; j <= i; ++j)
memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j),
&dummy_paramset, PARM_SIZE);
return EDMA_CTLR_CHAN(ctlr, i - num_params + 1);
return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1);
}
/*-----------------------------------------------------------------------*/
@ -743,26 +750,27 @@ EXPORT_SYMBOL(edma_free_slot);
/**
* edma_alloc_cont_slots- alloc contiguous parameter RAM slots
* The API will return the starting point of a set of
* contiguous PARAM's that have been requested
* contiguous parameter RAM slots that have been requested
*
* @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT
* or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
* @count: number of contiguous Paramter RAM's
* @param - the start value of Parameter RAM that should be passed if id
* @count: number of contiguous Paramter RAM slots
* @slot - the start value of Parameter RAM slot that should be passed if id
* is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
*
* If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of
* contiguous Parameter RAMs from parameter RAM 64 in the case of DaVinci SOCs
* and 32 in the case of Primus
* contiguous Parameter RAM slots from parameter RAM 64 in the case of
* DaVinci SOCs and 32 in the case of DA8xx SOCs.
*
* If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a
* set of contiguous parameter RAMs from the "param" that is passed as an
* set of contiguous parameter RAM slots from the "slot" that is passed as an
* argument to the API.
*
* If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries
* starts looking for a set of contiguous parameter RAMs from the "param"
* starts looking for a set of contiguous parameter RAMs from the "slot"
* that is passed as an argument to the API. On failure the API will try to
* find a set of contiguous Parameter RAMs in the remaining Parameter RAMs
* find a set of contiguous Parameter RAM slots from the remaining Parameter
* RAM slots
*/
int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
{
@ -771,12 +779,13 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
* the number of channels and lesser than the total number
* of slots
*/
if (slot < edma_info[ctlr]->num_channels ||
slot >= edma_info[ctlr]->num_slots)
if ((id != EDMA_CONT_PARAMS_ANY) &&
(slot < edma_info[ctlr]->num_channels ||
slot >= edma_info[ctlr]->num_slots))
return -EINVAL;
/*
* The number of parameter RAMs requested cannot be less than 1
* The number of parameter RAM slots requested cannot be less than 1
* and cannot be more than the number of slots minus the number of
* channels
*/
@ -786,11 +795,11 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
switch (id) {
case EDMA_CONT_PARAMS_ANY:
return reserve_contiguous_params(ctlr, id, count,
return reserve_contiguous_slots(ctlr, id, count,
edma_info[ctlr]->num_channels);
case EDMA_CONT_PARAMS_FIXED_EXACT:
case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
return reserve_contiguous_params(ctlr, id, count, slot);
return reserve_contiguous_slots(ctlr, id, count, slot);
default:
return -EINVAL;
}
@ -799,21 +808,21 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
EXPORT_SYMBOL(edma_alloc_cont_slots);
/**
* edma_free_cont_slots - deallocate DMA parameter RAMs
* @slot: first parameter RAM of a set of parameter RAMs to be freed
* @count: the number of contiguous parameter RAMs to be freed
* edma_free_cont_slots - deallocate DMA parameter RAM slots
* @slot: first parameter RAM of a set of parameter RAM slots to be freed
* @count: the number of contiguous parameter RAM slots to be freed
*
* This deallocates the parameter RAM slots allocated by
* edma_alloc_cont_slots.
* Callers/applications need to keep track of sets of contiguous
* parameter RAMs that have been allocated using the edma_alloc_cont_slots
* parameter RAM slots that have been allocated using the edma_alloc_cont_slots
* API.
* Callers are responsible for ensuring the slots are inactive, and will
* not be activated.
*/
int edma_free_cont_slots(unsigned slot, int count)
{
unsigned ctlr;
unsigned ctlr, slot_to_free;
int i;
ctlr = EDMA_CTLR(slot);
@ -826,11 +835,11 @@ int edma_free_cont_slots(unsigned slot, int count)
for (i = slot; i < slot + count; ++i) {
ctlr = EDMA_CTLR(i);
slot = EDMA_CHAN_SLOT(i);
slot_to_free = EDMA_CHAN_SLOT(i);
memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free),
&dummy_paramset, PARM_SIZE);
clear_bit(slot, edma_info[ctlr]->edma_inuse);
clear_bit(slot_to_free, edma_info[ctlr]->edma_inuse);
}
return 0;

View file

@ -12,23 +12,14 @@
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/bitops.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/gpio.h>
#include <asm/mach/irq.h>
static DEFINE_SPINLOCK(gpio_lock);
struct davinci_gpio {

View file

@ -11,6 +11,9 @@
#define DAVINCI_ASP0_BASE 0x01E02000
#define DAVINCI_ASP1_BASE 0x01E04000
/* Bases of dm365 register banks */
#define DAVINCI_DM365_ASP0_BASE 0x01D02000
/* Bases of dm646x register banks */
#define DAVINCI_DM646X_MCASP0_REG_BASE 0x01D01000
#define DAVINCI_DM646X_MCASP1_REG_BASE 0x01D01800

View file

@ -20,12 +20,6 @@ extern void davinci_irq_init(void);
extern void __iomem *davinci_intc_base;
extern int davinci_intc_type;
/* parameters describe VBUS sourcing for host mode */
extern void setup_usb(unsigned mA, unsigned potpgt_msec);
/* parameters describe VBUS sourcing for host mode */
extern void setup_usb(unsigned mA, unsigned potpgt_msec);
struct davinci_timer_instance {
void __iomem *base;
u32 bottom_irq;

View file

@ -0,0 +1,26 @@
/*
* TI DaVinci CPUFreq platform support.
*
* Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _MACH_DAVINCI_CPUFREQ_H
#define _MACH_DAVINCI_CPUFREQ_H
#include <linux/cpufreq.h>
struct davinci_cpufreq_config {
struct cpufreq_frequency_table *freq_table;
int (*set_voltage) (unsigned int index);
int (*init) (void);
};
#endif

View file

@ -0,0 +1,17 @@
/*
* TI DaVinci cpuidle platform support
*
* 2009 (C) Texas Instruments, Inc. http://www.ti.com/
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#ifndef _MACH_DAVINCI_CPUIDLE_H
#define _MACH_DAVINCI_CPUIDLE_H
struct davinci_cpuidle_config {
u32 ddr2_pdown;
};
#endif

View file

@ -11,12 +11,17 @@
#ifndef __ASM_ARCH_DAVINCI_DA8XX_H
#define __ASM_ARCH_DAVINCI_DA8XX_H
#include <video/da8xx-fb.h>
#include <mach/serial.h>
#include <mach/edma.h>
#include <mach/i2c.h>
#include <mach/emac.h>
#include <mach/asp.h>
#include <mach/mmc.h>
#include <mach/usb.h>
extern void __iomem *da8xx_syscfg_base;
/*
* The cp_intc interrupt controller for the da8xx isn't in the same
@ -29,11 +34,15 @@
#define DA8XX_CP_INTC_SIZE SZ_8K
#define DA8XX_CP_INTC_VIRT (IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
#define DA8XX_BOOT_CFG_BASE (IO_PHYS + 0x14000)
#define DA8XX_SYSCFG_BASE (IO_PHYS + 0x14000)
#define DA8XX_SYSCFG_VIRT(x) (da8xx_syscfg_base + (x))
#define DA8XX_JTAG_ID_REG 0x18
#define DA8XX_CFGCHIP0_REG 0x17c
#define DA8XX_CFGCHIP2_REG 0x184
#define DA8XX_CFGCHIP3_REG 0x188
#define DA8XX_PSC0_BASE 0x01c10000
#define DA8XX_PLL0_BASE 0x01c11000
#define DA8XX_JTAG_ID_REG 0x01c14018
#define DA8XX_TIMER64P0_BASE 0x01c20000
#define DA8XX_TIMER64P1_BASE 0x01c21000
#define DA8XX_GPIO_BASE 0x01e26000
@ -43,6 +52,7 @@
#define DA8XX_AEMIF_CS2_BASE 0x60000000
#define DA8XX_AEMIF_CS3_BASE 0x62000000
#define DA8XX_AEMIF_CTL_BASE 0x68000000
#define DA8XX_DDR2_CTL_BASE 0xb0000000
#define PINMUX0 0x00
#define PINMUX1 0x04
@ -71,13 +81,20 @@ void __init da850_init(void);
int da8xx_register_edma(void);
int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
int da8xx_register_watchdog(void);
int da8xx_register_usb20(unsigned mA, unsigned potpgt);
int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
int da8xx_register_emac(void);
int da8xx_register_lcdc(void);
int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);
int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata);
void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
int da8xx_register_rtc(void);
int da850_register_cpufreq(void);
int da8xx_register_cpuidle(void);
extern struct platform_device da8xx_serial_device;
extern struct emac_platform_data da8xx_emac_pdata;
extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
extern const short da830_emif25_pins[];
extern const short da830_spi0_pins[];
@ -110,6 +127,7 @@ extern const short da850_uart2_pins[];
extern const short da850_i2c0_pins[];
extern const short da850_i2c1_pins[];
extern const short da850_cpgmac_pins[];
extern const short da850_rmii_pins[];
extern const short da850_mcasp_pins[];
extern const short da850_lcdcntl_pins[];
extern const short da850_mmcsd0_pins[];

View file

@ -16,6 +16,8 @@
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <mach/emac.h>
#include <mach/asp.h>
#include <mach/keyscan.h>
#define DM365_EMAC_BASE (0x01D07000)
#define DM365_EMAC_CNTRL_OFFSET (0x0000)
@ -24,6 +26,14 @@
#define DM365_EMAC_MDIO_OFFSET (0x4000)
#define DM365_EMAC_CNTRL_RAM_SIZE (0x2000)
/* Base of key scan register bank */
#define DM365_KEYSCAN_BASE (0x01C69400)
#define DM365_RTC_BASE (0x01C69000)
void __init dm365_init(void);
void __init dm365_init_asp(struct snd_platform_data *pdata);
void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
void __init dm365_init_rtc(void);
#endif /* __ASM_ARCH_DM365_H */

View file

@ -22,7 +22,6 @@
#ifndef __ASM_ARCH_DM644X_H
#define __ASM_ARCH_DM644X_H
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <mach/emac.h>
#include <mach/asp.h>

View file

@ -217,6 +217,7 @@
#define IRQ_DM365_SDIOINT0 23
#define IRQ_DM365_MMCINT1 27
#define IRQ_DM365_PWMINT3 28
#define IRQ_DM365_RTCINT 29
#define IRQ_DM365_SDIOINT1 31
#define IRQ_DM365_SPIINT0_0 42
#define IRQ_DM365_SPIINT3_0 43

View file

@ -40,6 +40,11 @@ enum davinci_dm644x_index {
/* AEAW functions */
DM644X_AEAW,
DM644X_AEAW0,
DM644X_AEAW1,
DM644X_AEAW2,
DM644X_AEAW3,
DM644X_AEAW4,
/* Memory Stick */
DM644X_MSTK,
@ -237,8 +242,8 @@ enum davinci_dm365_index {
DM365_EMAC_MDIO,
DM365_EMAC_MDCLK,
/* Keypad */
DM365_KEYPAD,
/* Key Scan */
DM365_KEYSCAN,
/* PWM */
DM365_PWM0,
@ -774,6 +779,14 @@ enum davinci_da850_index {
DA850_MII_RXD_0,
DA850_MDIO_CLK,
DA850_MDIO_D,
DA850_RMII_TXD_0,
DA850_RMII_TXD_1,
DA850_RMII_TXEN,
DA850_RMII_CRS_DV,
DA850_RMII_RXD_0,
DA850_RMII_RXD_1,
DA850_RMII_RXER,
DA850_RMII_MHZ_50_CLK,
/* McASP function */
DA850_ACLKR,
@ -881,8 +894,9 @@ enum davinci_da850_index {
DA850_NEMA_CS_2,
/* GPIO function */
DA850_GPIO2_6,
DA850_GPIO2_8,
DA850_GPIO2_15,
DA850_GPIO8_10,
DA850_GPIO4_0,
DA850_GPIO4_1,
};

View file

@ -11,9 +11,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <linux/io.h>
#include <mach/hardware.h>
extern void davinci_watchdog_reset(void);
static inline void arch_idle(void)

View file

@ -0,0 +1,59 @@
/*
* USB related definitions
*
* Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#ifndef __ASM_ARCH_USB_H
#define __ASM_ARCH_USB_H
/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
#define CFGCHIP2_PHYCLKGD (1 << 17)
#define CFGCHIP2_VBUSSENSE (1 << 16)
#define CFGCHIP2_RESET (1 << 15)
#define CFGCHIP2_OTGMODE (3 << 13)
#define CFGCHIP2_NO_OVERRIDE (0 << 13)
#define CFGCHIP2_FORCE_HOST (1 << 13)
#define CFGCHIP2_FORCE_DEVICE (2 << 13)
#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
#define CFGCHIP2_USB1PHYCLKMUX (1 << 12)
#define CFGCHIP2_USB2PHYCLKMUX (1 << 11)
#define CFGCHIP2_PHYPWRDN (1 << 10)
#define CFGCHIP2_OTGPWRDN (1 << 9)
#define CFGCHIP2_DATPOL (1 << 8)
#define CFGCHIP2_USB1SUSPENDM (1 << 7)
#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */
#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */
#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */
#define CFGCHIP2_REFFREQ (0xf << 0)
#define CFGCHIP2_REFFREQ_12MHZ (1 << 0)
#define CFGCHIP2_REFFREQ_24MHZ (2 << 0)
#define CFGCHIP2_REFFREQ_48MHZ (3 << 0)
struct da8xx_ohci_root_hub;
typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,
unsigned port);
/* Passed as the platform data to the OHCI driver */
struct da8xx_ohci_root_hub {
/* Switch the port power on/off */
int (*set_power)(unsigned port, int on);
/* Read the port power status */
int (*get_power)(unsigned port);
/* Read the port over-current indicator */
int (*get_oci)(unsigned port);
/* Over-current indicator change notification (pass NULL to disable) */
int (*ocic_notify)(da8xx_ocic_handler_t handler);
/* Time from power on to power good (in 2 ms units) */
u8 potpgt;
};
void davinci_setup_usb(unsigned mA, unsigned potpgt_ms);
#endif /* ifndef __ASM_ARCH_USB_H */

View file

@ -19,7 +19,6 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <mach/hardware.h>
#include <mach/mux.h>
#include <mach/common.h>

View file

@ -19,14 +19,11 @@
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/io.h>
#include <mach/cputype.h>
#include <mach/hardware.h>
#include <mach/psc.h>
#include <mach/mux.h>
/* PSC register offsets */
#define EPCPR 0x070

View file

@ -28,14 +28,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/serial.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/common.h>
#include "clock.h"
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
int offset)

View file

@ -9,15 +9,12 @@
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/genalloc.h>
#include <mach/common.h>
#include <mach/memory.h>
#include <mach/sram.h>
static struct gen_pool *sram_pool;
void *sram_alloc(size_t len, dma_addr_t *dma)

View file

@ -14,20 +14,14 @@
#include <linux/interrupt.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/errno.h>
#include <mach/io.h>
#include <mach/cputype.h>
#include <mach/time.h>
#include "clock.h"

View file

@ -1,21 +1,21 @@
/*
* USB
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/musb.h>
#include <linux/usb/otg.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/usb.h>
#define DAVINCI_USB_OTG_BASE 0x01C64000
#define DAVINCI_USB_OTG_BASE 0x01c64000
#define DA8XX_USB0_BASE 0x01e00000
#define DA8XX_USB1_BASE 0x01e25000
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
static struct musb_hdrc_eps_bits musb_eps[] = {
@ -85,10 +85,10 @@ static struct platform_device usb_dev = {
.num_resources = ARRAY_SIZE(usb_resources),
};
void __init setup_usb(unsigned mA, unsigned potpgt_msec)
void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
{
usb_data.power = mA / 2;
usb_data.potpgt = potpgt_msec / 2;
usb_data.power = mA > 510 ? 255 : mA / 2;
usb_data.potpgt = (potpgt_ms + 1) / 2;
if (cpu_is_davinci_dm646x()) {
/* Override the defaults as DM6467 uses different IRQs. */
@ -100,11 +100,77 @@ void __init setup_usb(unsigned mA, unsigned potpgt_msec)
platform_device_register(&usb_dev);
}
#ifdef CONFIG_ARCH_DAVINCI_DA8XX
static struct resource da8xx_usb20_resources[] = {
{
.start = DA8XX_USB0_BASE,
.end = DA8XX_USB0_BASE + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_DA8XX_USB_INT,
.flags = IORESOURCE_IRQ,
},
};
int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
{
usb_data.clock = "usb20";
usb_data.power = mA > 510 ? 255 : mA / 2;
usb_data.potpgt = (potpgt + 1) / 2;
usb_dev.resource = da8xx_usb20_resources;
usb_dev.num_resources = ARRAY_SIZE(da8xx_usb20_resources);
return platform_device_register(&usb_dev);
}
#endif /* CONFIG_DAVINCI_DA8XX */
#else
void __init setup_usb(unsigned mA, unsigned potpgt_msec)
void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
{
}
#ifdef CONFIG_ARCH_DAVINCI_DA8XX
int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
{
return 0;
}
#endif
#endif /* CONFIG_USB_MUSB_HDRC */
#ifdef CONFIG_ARCH_DAVINCI_DA8XX
static struct resource da8xx_usb11_resources[] = {
[0] = {
.start = DA8XX_USB1_BASE,
.end = DA8XX_USB1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_DA8XX_IRQN,
.end = IRQ_DA8XX_IRQN,
.flags = IORESOURCE_IRQ,
},
};
static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
static struct platform_device da8xx_usb11_device = {
.name = "ohci",
.id = 0,
.dev = {
.dma_mask = &da8xx_usb11_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(da8xx_usb11_resources),
.resource = da8xx_usb11_resources,
};
int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
{
da8xx_usb11_device.dev.platform_data = pdata;
return platform_device_register(&da8xx_usb11_device);
}
#endif /* CONFIG_DAVINCI_DA8XX */