[PATCH] md: allow md array component size to be accessed and set via sysfs

Signed-off-by: Neil Brown <neilb@suse.de>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
NeilBrown 2006-01-06 00:20:49 -08:00 committed by Linus Torvalds
parent 3b34380ae8
commit a35b0d695d
2 changed files with 98 additions and 42 deletions

View file

@ -174,6 +174,15 @@ All md devices contain:
The size should be atleast PAGE_SIZE (4k) and should be a power
of 2. This can only be set while assembling an array
component_size
For arrays with data redundancy (i.e. not raid0, linear, faulty,
multipath), all components must be the same size - or at least
there must a size that they all provide space for. This is a key
part or the geometry of the array. It is measured in sectors
and can be read from here. Writing to this value may resize
the array if the personality supports it (raid1, raid5, raid6),
and if the component drives are large enough.
As component devices are added to an md array, they appear in the 'md'
directory as new directories named
dev-XXX

View file

@ -1819,6 +1819,44 @@ static struct md_sysfs_entry md_chunk_size =
__ATTR(chunk_size, 0644, chunk_size_show, chunk_size_store);
static ssize_t
size_show(mddev_t *mddev, char *page)
{
return sprintf(page, "%llu\n", (unsigned long long)mddev->size);
}
static int update_size(mddev_t *mddev, unsigned long size);
static ssize_t
size_store(mddev_t *mddev, const char *buf, size_t len)
{
/* If array is inactive, we can reduce the component size, but
* not increase it (except from 0).
* If array is active, we can try an on-line resize
*/
char *e;
int err = 0;
unsigned long long size = simple_strtoull(buf, &e, 10);
if (!*buf || *buf == '\n' ||
(*e && *e != '\n'))
return -EINVAL;
if (mddev->pers) {
err = update_size(mddev, size);
md_update_sb(mddev);
} else {
if (mddev->size == 0 ||
mddev->size > size)
mddev->size = size;
else
err = -ENOSPC;
}
return err ? err : len;
}
static struct md_sysfs_entry md_size =
__ATTR(component_size, 0644, size_show, size_store);
static ssize_t
action_show(mddev_t *mddev, char *page)
{
@ -1887,6 +1925,7 @@ static struct attribute *md_default_attrs[] = {
&md_level.attr,
&md_raid_disks.attr,
&md_chunk_size.attr,
&md_size.attr,
NULL,
};
@ -3005,6 +3044,54 @@ static int set_array_info(mddev_t * mddev, mdu_array_info_t *info)
return 0;
}
static int update_size(mddev_t *mddev, unsigned long size)
{
mdk_rdev_t * rdev;
int rv;
struct list_head *tmp;
if (mddev->pers->resize == NULL)
return -EINVAL;
/* The "size" is the amount of each device that is used.
* This can only make sense for arrays with redundancy.
* linear and raid0 always use whatever space is available
* We can only consider changing the size if no resync
* or reconstruction is happening, and if the new size
* is acceptable. It must fit before the sb_offset or,
* if that is <data_offset, it must fit before the
* size of each device.
* If size is zero, we find the largest size that fits.
*/
if (mddev->sync_thread)
return -EBUSY;
ITERATE_RDEV(mddev,rdev,tmp) {
sector_t avail;
int fit = (size == 0);
if (rdev->sb_offset > rdev->data_offset)
avail = (rdev->sb_offset*2) - rdev->data_offset;
else
avail = get_capacity(rdev->bdev->bd_disk)
- rdev->data_offset;
if (fit && (size == 0 || size > avail/2))
size = avail/2;
if (avail < ((sector_t)size << 1))
return -ENOSPC;
}
rv = mddev->pers->resize(mddev, (sector_t)size *2);
if (!rv) {
struct block_device *bdev;
bdev = bdget_disk(mddev->gendisk, 0);
if (bdev) {
down(&bdev->bd_inode->i_sem);
i_size_write(bdev->bd_inode, mddev->array_size << 10);
up(&bdev->bd_inode->i_sem);
bdput(bdev);
}
}
return rv;
}
/*
* update_array_info is used to change the configuration of an
* on-line array.
@ -3053,49 +3140,9 @@ static int update_array_info(mddev_t *mddev, mdu_array_info_t *info)
else
return mddev->pers->reconfig(mddev, info->layout, -1);
}
if (mddev->size != info->size) {
mdk_rdev_t * rdev;
struct list_head *tmp;
if (mddev->pers->resize == NULL)
return -EINVAL;
/* The "size" is the amount of each device that is used.
* This can only make sense for arrays with redundancy.
* linear and raid0 always use whatever space is available
* We can only consider changing the size if no resync
* or reconstruction is happening, and if the new size
* is acceptable. It must fit before the sb_offset or,
* if that is <data_offset, it must fit before the
* size of each device.
* If size is zero, we find the largest size that fits.
*/
if (mddev->sync_thread)
return -EBUSY;
ITERATE_RDEV(mddev,rdev,tmp) {
sector_t avail;
int fit = (info->size == 0);
if (rdev->sb_offset > rdev->data_offset)
avail = (rdev->sb_offset*2) - rdev->data_offset;
else
avail = get_capacity(rdev->bdev->bd_disk)
- rdev->data_offset;
if (fit && (info->size == 0 || info->size > avail/2))
info->size = avail/2;
if (avail < ((sector_t)info->size << 1))
return -ENOSPC;
}
rv = mddev->pers->resize(mddev, (sector_t)info->size *2);
if (!rv) {
struct block_device *bdev;
if (mddev->size != info->size)
rv = update_size(mddev, info->size);
bdev = bdget_disk(mddev->gendisk, 0);
if (bdev) {
down(&bdev->bd_inode->i_sem);
i_size_write(bdev->bd_inode, mddev->array_size << 10);
up(&bdev->bd_inode->i_sem);
bdput(bdev);
}
}
}
if (mddev->raid_disks != info->raid_disks) {
/* change the number of raid disks */
if (mddev->pers->reshape == NULL)