Merge branch 'for-v3.12' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping

Pull DMA mapping update from Marek Szyprowski:
 "This contains an addition of Device Tree support for reserved memory
  regions (Contiguous Memory Allocator is one of the drivers for it) and
  changes required by the KVM extensions for PowerPC architectue"

* 'for-v3.12' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: init: add support for reserved memory defined by device tree
  drivers: of: add initialization code for dma reserved memory
  drivers: of: add function to scan fdt nodes given by path
  drivers: dma-contiguous: clean source code and prepare for device tree
This commit is contained in:
Linus Torvalds 2013-09-09 10:26:33 -07:00
commit 64c353864e
15 changed files with 555 additions and 108 deletions

View file

@ -0,0 +1,168 @@
*** Memory binding ***
The /memory node provides basic information about the address and size
of the physical memory. This node is usually filled or updated by the
bootloader, depending on the actual memory configuration of the given
hardware.
The memory layout is described by the following node:
/ {
#address-cells = <(n)>;
#size-cells = <(m)>;
memory {
device_type = "memory";
reg = <(baseaddr1) (size1)
(baseaddr2) (size2)
...
(baseaddrN) (sizeN)>;
};
...
};
A memory node follows the typical device tree rules for "reg" property:
n: number of cells used to store base address value
m: number of cells used to store size value
baseaddrX: defines a base address of the defined memory bank
sizeX: the size of the defined memory bank
More than one memory bank can be defined.
*** Reserved memory regions ***
In /memory/reserved-memory node one can create child nodes describing
particular reserved (excluded from normal use) memory regions. Such
memory regions are usually designed for the special usage by various
device drivers. A good example are contiguous memory allocations or
memory sharing with other operating system on the same hardware board.
Those special memory regions might depend on the board configuration and
devices used on the target system.
Parameters for each memory region can be encoded into the device tree
with the following convention:
[(label):] (name) {
compatible = "linux,contiguous-memory-region", "reserved-memory-region";
reg = <(address) (size)>;
(linux,default-contiguous-region);
};
compatible: one or more of:
- "linux,contiguous-memory-region" - enables binding of this
region to Contiguous Memory Allocator (special region for
contiguous memory allocations, shared with movable system
memory, Linux kernel-specific).
- "reserved-memory-region" - compatibility is defined, given
region is assigned for exclusive usage for by the respective
devices.
reg: standard property defining the base address and size of
the memory region
linux,default-contiguous-region: property indicating that the region
is the default region for all contiguous memory
allocations, Linux specific (optional)
It is optional to specify the base address, so if one wants to use
autoconfiguration of the base address, '0' can be specified as a base
address in the 'reg' property.
The /memory/reserved-memory node must contain the same #address-cells
and #size-cells value as the root node.
*** Device node's properties ***
Once regions in the /memory/reserved-memory node have been defined, they
may be referenced by other device nodes. Bindings that wish to reference
memory regions should explicitly document their use of the following
property:
memory-region = <&phandle_to_defined_region>;
This property indicates that the device driver should use the memory
region pointed by the given phandle.
*** Example ***
This example defines a memory consisting of 4 memory banks. 3 contiguous
regions are defined for Linux kernel, one default of all device drivers
(named contig_mem, placed at 0x72000000, 64MiB), one dedicated to the
framebuffer device (labelled display_mem, placed at 0x78000000, 8MiB)
and one for multimedia processing (labelled multimedia_mem, placed at
0x77000000, 64MiB). 'display_mem' region is then assigned to fb@12300000
device for DMA memory allocations (Linux kernel drivers will use CMA is
available or dma-exclusive usage otherwise). 'multimedia_mem' is
assigned to scaler@12500000 and codec@12600000 devices for contiguous
memory allocations when CMA driver is enabled.
The reason for creating a separate region for framebuffer device is to
match the framebuffer base address to the one configured by bootloader,
so once Linux kernel drivers starts no glitches on the displayed boot
logo appears. Scaller and codec drivers should share the memory
allocations.
/ {
#address-cells = <1>;
#size-cells = <1>;
/* ... */
memory {
reg = <0x40000000 0x10000000
0x50000000 0x10000000
0x60000000 0x10000000
0x70000000 0x10000000>;
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
/*
* global autoconfigured region for contiguous allocations
* (used only with Contiguous Memory Allocator)
*/
contig_region@0 {
compatible = "linux,contiguous-memory-region";
reg = <0x0 0x4000000>;
linux,default-contiguous-region;
};
/*
* special region for framebuffer
*/
display_region: region@78000000 {
compatible = "linux,contiguous-memory-region", "reserved-memory-region";
reg = <0x78000000 0x800000>;
};
/*
* special region for multimedia processing devices
*/
multimedia_region: region@77000000 {
compatible = "linux,contiguous-memory-region";
reg = <0x77000000 0x4000000>;
};
};
};
/* ... */
fb0: fb@12300000 {
status = "okay";
memory-region = <&display_region>;
};
scaler: scaler@12500000 {
status = "okay";
memory-region = <&multimedia_region>;
};
codec: codec@12600000 {
status = "okay";
memory-region = <&multimedia_region>;
};
};

View file

@ -5,7 +5,6 @@
#ifdef CONFIG_DMA_CMA
#include <linux/types.h>
#include <asm-generic/dma-contiguous.h>
void dma_contiguous_early_fixup(phys_addr_t base, unsigned long size);

View file

@ -17,6 +17,7 @@
#include <linux/nodemask.h>
#include <linux/initrd.h>
#include <linux/of_fdt.h>
#include <linux/of_reserved_mem.h>
#include <linux/highmem.h>
#include <linux/gfp.h>
#include <linux/memblock.h>
@ -378,6 +379,8 @@ void __init arm_memblock_init(struct meminfo *mi,
if (mdesc->reserve)
mdesc->reserve();
early_init_dt_scan_reserved_mem();
/*
* reserve memory for DMA contigouos allocations,
* must come from DMA area inside low memory

View file

@ -4,7 +4,6 @@
#ifdef __KERNEL__
#include <linux/types.h>
#include <asm-generic/dma-contiguous.h>
static inline void
dma_contiguous_early_fixup(phys_addr_t base, unsigned long size) { }

View file

@ -96,7 +96,7 @@ static inline __maybe_unused phys_addr_t cma_early_percent_memory(void)
#endif
/**
* dma_contiguous_reserve() - reserve area for contiguous memory handling
* dma_contiguous_reserve() - reserve area(s) for contiguous memory handling
* @limit: End address of the reserved memory (optional, 0 for any).
*
* This function reserves memory from early allocator. It should be
@ -124,22 +124,29 @@ void __init dma_contiguous_reserve(phys_addr_t limit)
#endif
}
if (selected_size) {
if (selected_size && !dma_contiguous_default_area) {
pr_debug("%s: reserving %ld MiB for global area\n", __func__,
(unsigned long)selected_size / SZ_1M);
dma_declare_contiguous(NULL, selected_size, 0, limit);
dma_contiguous_reserve_area(selected_size, 0, limit,
&dma_contiguous_default_area);
}
};
static DEFINE_MUTEX(cma_mutex);
static int __init cma_activate_area(unsigned long base_pfn, unsigned long count)
static int __init cma_activate_area(struct cma *cma)
{
unsigned long pfn = base_pfn;
unsigned i = count >> pageblock_order;
int bitmap_size = BITS_TO_LONGS(cma->count) * sizeof(long);
unsigned long base_pfn = cma->base_pfn, pfn = base_pfn;
unsigned i = cma->count >> pageblock_order;
struct zone *zone;
cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
if (!cma->bitmap)
return -ENOMEM;
WARN_ON_ONCE(!pfn_valid(pfn));
zone = page_zone(pfn_to_page(pfn));
@ -153,92 +160,53 @@ static int __init cma_activate_area(unsigned long base_pfn, unsigned long count)
}
init_cma_reserved_pageblock(pfn_to_page(base_pfn));
} while (--i);
return 0;
}
static struct cma * __init cma_create_area(unsigned long base_pfn,
unsigned long count)
{
int bitmap_size = BITS_TO_LONGS(count) * sizeof(long);
struct cma *cma;
int ret = -ENOMEM;
pr_debug("%s(base %08lx, count %lx)\n", __func__, base_pfn, count);
cma = kmalloc(sizeof *cma, GFP_KERNEL);
if (!cma)
return ERR_PTR(-ENOMEM);
cma->base_pfn = base_pfn;
cma->count = count;
cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
if (!cma->bitmap)
goto no_mem;
ret = cma_activate_area(base_pfn, count);
if (ret)
goto error;
pr_debug("%s: returned %p\n", __func__, (void *)cma);
return cma;
error:
kfree(cma->bitmap);
no_mem:
kfree(cma);
return ERR_PTR(ret);
}
static struct cma_reserved {
phys_addr_t start;
unsigned long size;
struct device *dev;
} cma_reserved[MAX_CMA_AREAS] __initdata;
static unsigned cma_reserved_count __initdata;
static struct cma cma_areas[MAX_CMA_AREAS];
static unsigned cma_area_count;
static int __init cma_init_reserved_areas(void)
{
struct cma_reserved *r = cma_reserved;
unsigned i = cma_reserved_count;
int i;
pr_debug("%s()\n", __func__);
for (; i; --i, ++r) {
struct cma *cma;
cma = cma_create_area(PFN_DOWN(r->start),
r->size >> PAGE_SHIFT);
if (!IS_ERR(cma))
dev_set_cma_area(r->dev, cma);
for (i = 0; i < cma_area_count; i++) {
int ret = cma_activate_area(&cma_areas[i]);
if (ret)
return ret;
}
return 0;
}
core_initcall(cma_init_reserved_areas);
/**
* dma_declare_contiguous() - reserve area for contiguous memory handling
* for particular device
* @dev: Pointer to device structure.
* @size: Size of the reserved memory.
* @base: Start address of the reserved memory (optional, 0 for any).
* dma_contiguous_reserve_area() - reserve custom contiguous area
* @size: Size of the reserved area (in bytes),
* @base: Base address of the reserved area optional, use 0 for any
* @limit: End address of the reserved memory (optional, 0 for any).
* @res_cma: Pointer to store the created cma region.
*
* This function reserves memory for specified device. It should be
* called by board specific code when early allocator (memblock or bootmem)
* is still activate.
* This function reserves memory from early allocator. It should be
* called by arch specific code once the early allocator (memblock or bootmem)
* has been activated and all other subsystems have already allocated/reserved
* memory. This function allows to create custom reserved areas for specific
* devices.
*/
int __init dma_declare_contiguous(struct device *dev, phys_addr_t size,
phys_addr_t base, phys_addr_t limit)
int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base,
phys_addr_t limit, struct cma **res_cma)
{
struct cma_reserved *r = &cma_reserved[cma_reserved_count];
struct cma *cma = &cma_areas[cma_area_count];
phys_addr_t alignment;
int ret = 0;
pr_debug("%s(size %lx, base %08lx, limit %08lx)\n", __func__,
(unsigned long)size, (unsigned long)base,
(unsigned long)limit);
/* Sanity checks */
if (cma_reserved_count == ARRAY_SIZE(cma_reserved)) {
if (cma_area_count == ARRAY_SIZE(cma_areas)) {
pr_err("Not enough slots for CMA reserved regions!\n");
return -ENOSPC;
}
@ -256,7 +224,7 @@ int __init dma_declare_contiguous(struct device *dev, phys_addr_t size,
if (base) {
if (memblock_is_region_reserved(base, size) ||
memblock_reserve(base, size) < 0) {
base = -EBUSY;
ret = -EBUSY;
goto err;
}
} else {
@ -266,7 +234,7 @@ int __init dma_declare_contiguous(struct device *dev, phys_addr_t size,
*/
phys_addr_t addr = __memblock_alloc_base(size, alignment, limit);
if (!addr) {
base = -ENOMEM;
ret = -ENOMEM;
goto err;
} else {
base = addr;
@ -277,10 +245,11 @@ int __init dma_declare_contiguous(struct device *dev, phys_addr_t size,
* Each reserved area must be initialised later, when more kernel
* subsystems (like slab allocator) are available.
*/
r->start = base;
r->size = size;
r->dev = dev;
cma_reserved_count++;
cma->base_pfn = PFN_DOWN(base);
cma->count = size >> PAGE_SHIFT;
*res_cma = cma;
cma_area_count++;
pr_info("CMA: reserved %ld MiB at %08lx\n", (unsigned long)size / SZ_1M,
(unsigned long)base);
@ -289,7 +258,7 @@ int __init dma_declare_contiguous(struct device *dev, phys_addr_t size,
return 0;
err:
pr_err("CMA: failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M);
return base;
return ret;
}
/**

View file

@ -74,4 +74,10 @@ config OF_MTD
depends on MTD
def_bool y
config OF_RESERVED_MEM
depends on OF_FLATTREE && (DMA_CMA || (HAVE_GENERIC_DMA_COHERENT && HAVE_MEMBLOCK))
def_bool y
help
Initialization code for DMA reserved memory
endmenu # OF

View file

@ -9,3 +9,4 @@ obj-$(CONFIG_OF_MDIO) += of_mdio.o
obj-$(CONFIG_OF_PCI) += of_pci.o
obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
obj-$(CONFIG_OF_MTD) += of_mtd.o
obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o

View file

@ -545,6 +545,82 @@ int __init of_flat_dt_match(unsigned long node, const char *const *compat)
return of_fdt_match(initial_boot_params, node, compat);
}
struct fdt_scan_status {
const char *name;
int namelen;
int depth;
int found;
int (*iterator)(unsigned long node, const char *uname, int depth, void *data);
void *data;
};
/**
* fdt_scan_node_by_path - iterator for of_scan_flat_dt_by_path function
*/
static int __init fdt_scan_node_by_path(unsigned long node, const char *uname,
int depth, void *data)
{
struct fdt_scan_status *st = data;
/*
* if scan at the requested fdt node has been completed,
* return -ENXIO to abort further scanning
*/
if (depth <= st->depth)
return -ENXIO;
/* requested fdt node has been found, so call iterator function */
if (st->found)
return st->iterator(node, uname, depth, st->data);
/* check if scanning automata is entering next level of fdt nodes */
if (depth == st->depth + 1 &&
strncmp(st->name, uname, st->namelen) == 0 &&
uname[st->namelen] == 0) {
st->depth += 1;
if (st->name[st->namelen] == 0) {
st->found = 1;
} else {
const char *next = st->name + st->namelen + 1;
st->name = next;
st->namelen = strcspn(next, "/");
}
return 0;
}
/* scan next fdt node */
return 0;
}
/**
* of_scan_flat_dt_by_path - scan flattened tree blob and call callback on each
* child of the given path.
* @path: path to start searching for children
* @it: callback function
* @data: context data pointer
*
* This function is used to scan the flattened device-tree starting from the
* node given by path. It is used to extract information (like reserved
* memory), which is required on ealy boot before we can unflatten the tree.
*/
int __init of_scan_flat_dt_by_path(const char *path,
int (*it)(unsigned long node, const char *name, int depth, void *data),
void *data)
{
struct fdt_scan_status st = {path, 0, -1, 0, it, data};
int ret = 0;
if (initial_boot_params)
ret = of_scan_flat_dt(fdt_scan_node_by_path, &st);
if (!st.found)
return -ENOENT;
else if (ret == -ENXIO) /* scan has been completed */
return 0;
else
return ret;
}
#ifdef CONFIG_BLK_DEV_INITRD
/**
* early_init_dt_check_for_initrd - Decode initrd location from flat tree

View file

@ -0,0 +1,175 @@
/*
* Device tree based initialization code for reserved memory.
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* Author: Marek Szyprowski <m.szyprowski@samsung.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License or (at your optional) any later version of the license.
*/
#include <asm/dma-contiguous.h>
#include <linux/memblock.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/mm.h>
#include <linux/sizes.h>
#include <linux/mm_types.h>
#include <linux/dma-contiguous.h>
#include <linux/dma-mapping.h>
#include <linux/of_reserved_mem.h>
#define MAX_RESERVED_REGIONS 16
struct reserved_mem {
phys_addr_t base;
unsigned long size;
struct cma *cma;
char name[32];
};
static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS];
static int reserved_mem_count;
static int __init fdt_scan_reserved_mem(unsigned long node, const char *uname,
int depth, void *data)
{
struct reserved_mem *rmem = &reserved_mem[reserved_mem_count];
phys_addr_t base, size;
int is_cma, is_reserved;
unsigned long len;
const char *status;
__be32 *prop;
is_cma = IS_ENABLED(CONFIG_DMA_CMA) &&
of_flat_dt_is_compatible(node, "linux,contiguous-memory-region");
is_reserved = of_flat_dt_is_compatible(node, "reserved-memory-region");
if (!is_reserved && !is_cma) {
/* ignore node and scan next one */
return 0;
}
status = of_get_flat_dt_prop(node, "status", &len);
if (status && strcmp(status, "okay") != 0) {
/* ignore disabled node nad scan next one */
return 0;
}
prop = of_get_flat_dt_prop(node, "reg", &len);
if (!prop || (len < (dt_root_size_cells + dt_root_addr_cells) *
sizeof(__be32))) {
pr_err("Reserved mem: node %s, incorrect \"reg\" property\n",
uname);
/* ignore node and scan next one */
return 0;
}
base = dt_mem_next_cell(dt_root_addr_cells, &prop);
size = dt_mem_next_cell(dt_root_size_cells, &prop);
if (!size) {
/* ignore node and scan next one */
return 0;
}
pr_info("Reserved mem: found %s, memory base %lx, size %ld MiB\n",
uname, (unsigned long)base, (unsigned long)size / SZ_1M);
if (reserved_mem_count == ARRAY_SIZE(reserved_mem))
return -ENOSPC;
rmem->base = base;
rmem->size = size;
strlcpy(rmem->name, uname, sizeof(rmem->name));
if (is_cma) {
struct cma *cma;
if (dma_contiguous_reserve_area(size, base, 0, &cma) == 0) {
rmem->cma = cma;
reserved_mem_count++;
if (of_get_flat_dt_prop(node,
"linux,default-contiguous-region",
NULL))
dma_contiguous_set_default(cma);
}
} else if (is_reserved) {
if (memblock_remove(base, size) == 0)
reserved_mem_count++;
else
pr_err("Failed to reserve memory for %s\n", uname);
}
return 0;
}
static struct reserved_mem *get_dma_memory_region(struct device *dev)
{
struct device_node *node;
const char *name;
int i;
node = of_parse_phandle(dev->of_node, "memory-region", 0);
if (!node)
return NULL;
name = kbasename(node->full_name);
for (i = 0; i < reserved_mem_count; i++)
if (strcmp(name, reserved_mem[i].name) == 0)
return &reserved_mem[i];
return NULL;
}
/**
* of_reserved_mem_device_init() - assign reserved memory region to given device
*
* This function assign memory region pointed by "memory-region" device tree
* property to the given device.
*/
void of_reserved_mem_device_init(struct device *dev)
{
struct reserved_mem *region = get_dma_memory_region(dev);
if (!region)
return;
if (region->cma) {
dev_set_cma_area(dev, region->cma);
pr_info("Assigned CMA %s to %s device\n", region->name,
dev_name(dev));
} else {
if (dma_declare_coherent_memory(dev, region->base, region->base,
region->size, DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) != 0)
pr_info("Declared reserved memory %s to %s device\n",
region->name, dev_name(dev));
}
}
/**
* of_reserved_mem_device_release() - release reserved memory device structures
*
* This function releases structures allocated for memory region handling for
* the given device.
*/
void of_reserved_mem_device_release(struct device *dev)
{
struct reserved_mem *region = get_dma_memory_region(dev);
if (!region && !region->cma)
dma_release_declared_memory(dev);
}
/**
* early_init_dt_scan_reserved_mem() - create reserved memory regions
*
* This function grabs memory from early allocator for device exclusive use
* defined in device tree structures. It should be called by arch specific code
* once the early allocator (memblock) has been activated and all other
* subsystems have already allocated/reserved memory.
*/
void __init early_init_dt_scan_reserved_mem(void)
{
of_scan_flat_dt_by_path("/memory/reserved-memory",
fdt_scan_reserved_mem, NULL);
}

View file

@ -21,6 +21,7 @@
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
const struct of_device_id of_default_bus_match_table[] = {
@ -218,6 +219,8 @@ struct platform_device *of_platform_device_create_pdata(
dev->dev.bus = &platform_bus_type;
dev->dev.platform_data = platform_data;
of_reserved_mem_device_init(&dev->dev);
/* We do not fill the DMA ops for platform devices by default.
* This is currently the responsibility of the platform code
* to do such, possibly using a device notifier
@ -225,6 +228,7 @@ struct platform_device *of_platform_device_create_pdata(
if (of_device_add(dev) != 0) {
platform_device_put(dev);
of_reserved_mem_device_release(&dev->dev);
return NULL;
}

View file

@ -1,28 +0,0 @@
#ifndef ASM_DMA_CONTIGUOUS_H
#define ASM_DMA_CONTIGUOUS_H
#ifdef __KERNEL__
#ifdef CONFIG_CMA
#include <linux/device.h>
#include <linux/dma-contiguous.h>
static inline struct cma *dev_get_cma_area(struct device *dev)
{
if (dev && dev->cma_area)
return dev->cma_area;
return dma_contiguous_default_area;
}
static inline void dev_set_cma_area(struct device *dev, struct cma *cma)
{
if (dev)
dev->cma_area = cma;
if (!dev && !dma_contiguous_default_area)
dma_contiguous_default_area = cma;
}
#endif
#endif
#endif

View file

@ -737,7 +737,7 @@ struct device {
struct dma_coherent_mem *dma_mem; /* internal for coherent mem
override */
#ifdef CONFIG_CMA
#ifdef CONFIG_DMA_CMA
struct cma *cma_area; /* contiguous memory area for dma
allocations */
#endif

View file

@ -67,9 +67,53 @@ struct device;
extern struct cma *dma_contiguous_default_area;
static inline struct cma *dev_get_cma_area(struct device *dev)
{
if (dev && dev->cma_area)
return dev->cma_area;
return dma_contiguous_default_area;
}
static inline void dev_set_cma_area(struct device *dev, struct cma *cma)
{
if (dev)
dev->cma_area = cma;
}
static inline void dma_contiguous_set_default(struct cma *cma)
{
dma_contiguous_default_area = cma;
}
void dma_contiguous_reserve(phys_addr_t addr_limit);
int dma_declare_contiguous(struct device *dev, phys_addr_t size,
phys_addr_t base, phys_addr_t limit);
int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base,
phys_addr_t limit, struct cma **res_cma);
/**
* dma_declare_contiguous() - reserve area for contiguous memory handling
* for particular device
* @dev: Pointer to device structure.
* @size: Size of the reserved memory.
* @base: Start address of the reserved memory (optional, 0 for any).
* @limit: End address of the reserved memory (optional, 0 for any).
*
* This function reserves memory for specified device. It should be
* called by board specific code when early allocator (memblock or bootmem)
* is still activate.
*/
static inline int dma_declare_contiguous(struct device *dev, phys_addr_t size,
phys_addr_t base, phys_addr_t limit)
{
struct cma *cma;
int ret;
ret = dma_contiguous_reserve_area(size, base, limit, &cma);
if (ret == 0)
dev_set_cma_area(dev, cma);
return ret;
}
struct page *dma_alloc_from_contiguous(struct device *dev, int count,
unsigned int order);
@ -80,8 +124,22 @@ bool dma_release_from_contiguous(struct device *dev, struct page *pages,
#define MAX_CMA_AREAS (0)
static inline struct cma *dev_get_cma_area(struct device *dev)
{
return NULL;
}
static inline void dev_set_cma_area(struct device *dev, struct cma *cma) { }
static inline void dma_contiguous_set_default(struct cma *cma) { }
static inline void dma_contiguous_reserve(phys_addr_t limit) { }
static inline int dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base,
phys_addr_t limit, struct cma **res_cma) {
return -ENOSYS;
}
static inline
int dma_declare_contiguous(struct device *dev, phys_addr_t size,
phys_addr_t base, phys_addr_t limit)

View file

@ -90,6 +90,9 @@ extern void *of_get_flat_dt_prop(unsigned long node, const char *name,
extern int of_flat_dt_is_compatible(unsigned long node, const char *name);
extern int of_flat_dt_match(unsigned long node, const char *const *matches);
extern unsigned long of_get_flat_dt_root(void);
extern int of_scan_flat_dt_by_path(const char *path,
int (*it)(unsigned long node, const char *name, int depth, void *data),
void *data);
extern int early_init_dt_scan_chosen(unsigned long node, const char *uname,
int depth, void *data);

View file

@ -0,0 +1,14 @@
#ifndef __OF_RESERVED_MEM_H
#define __OF_RESERVED_MEM_H
#ifdef CONFIG_OF_RESERVED_MEM
void of_reserved_mem_device_init(struct device *dev);
void of_reserved_mem_device_release(struct device *dev);
void early_init_dt_scan_reserved_mem(void);
#else
static inline void of_reserved_mem_device_init(struct device *dev) { }
static inline void of_reserved_mem_device_release(struct device *dev) { }
static inline void early_init_dt_scan_reserved_mem(void) { }
#endif
#endif /* __OF_RESERVED_MEM_H */