diff --git a/Documentation/drivers/edac/edac.txt b/Documentation/drivers/edac/edac.txt index 70d96a62e5e1..7b3d969d2964 100644 --- a/Documentation/drivers/edac/edac.txt +++ b/Documentation/drivers/edac/edac.txt @@ -35,15 +35,14 @@ the vendor should tie the parity status bits to 0 if they do not intend to generate parity. Some vendors do not do this, and thus the parity bit can "float" giving false positives. -The PCI Parity EDAC device has the ability to "skip" known flaky -cards during the parity scan. These are set by the parity "blacklist" -interface in the sysfs for PCI Parity. (See the PCI section in the sysfs -section below.) There is also a parity "whitelist" which is used as -an explicit list of devices to scan, while the blacklist is a list -of devices to skip. +[There are patches in the kernel queue which will allow for storage of +quirks of PCI devices reporting false parity positives. The 2.6.18 +kernel should have those patches included. When that becomes available, +then EDAC will be patched to utilize that information to "skip" such +devices.] -EDAC will have future error detectors that will be added or integrated -into EDAC in the following list: +EDAC will have future error detectors that will be integrated with +EDAC or added to it, in the following list: MCE Machine Check Exception MCA Machine Check Architecture @@ -93,22 +92,24 @@ EDAC lives in the /sys/devices/system/edac directory. Within this directory there currently reside 2 'edac' components: mc memory controller(s) system - pci PCI status system + pci PCI control and status system ============================================================================ Memory Controller (mc) Model First a background on the memory controller's model abstracted in EDAC. -Each mc device controls a set of DIMM memory modules. These modules are +Each 'mc' device controls a set of DIMM memory modules. These modules are laid out in a Chip-Select Row (csrowX) and Channel table (chX). There can -be multiple csrows and two channels. +be multiple csrows and multiple channels. Memory controllers allow for several csrows, with 8 csrows being a typical value. Yet, the actual number of csrows depends on the electrical "loading" of a given motherboard, memory controller and DIMM characteristics. Dual channels allows for 128 bit data transfers to the CPU from memory. +Some newer chipsets allow for more than 2 channels, like Fully Buffered DIMMs +(FB-DIMMs). The following example will assume 2 channels: Channel 0 Channel 1 @@ -234,23 +235,15 @@ Polling period control file: The time period, in milliseconds, for polling for error information. Too small a value wastes resources. Too large a value might delay necessary handling of errors and might loose valuable information for - locating the error. 1000 milliseconds (once each second) is about - right for most uses. + locating the error. 1000 milliseconds (once each second) is the current + default. Systems which require all the bandwidth they can get, may + increase this. LOAD TIME: module/kernel parameter: poll_msec=[0|1] RUN TIME: echo "1000" >/sys/devices/system/edac/mc/poll_msec -Module Version read-only attribute file: - - 'mc_version' - - The EDAC CORE module's version and compile date are shown here to - indicate what EDAC is running. - - - ============================================================================ 'mcX' DIRECTORIES @@ -284,35 +277,6 @@ Seconds since last counter reset control file: -DIMM capability attribute file: - - 'edac_capability' - - The EDAC (Error Detection and Correction) capabilities/modes of - the memory controller hardware. - - -DIMM Current Capability attribute file: - - 'edac_current_capability' - - The EDAC capabilities available with the hardware - configuration. This may not be the same as "EDAC capability" - if the correct memory is not used. If a memory controller is - capable of EDAC, but DIMMs without check bits are in use, then - Parity, SECDED, S4ECD4ED capabilities will not be available - even though the memory controller might be capable of those - modes with the proper memory loaded. - - -Memory Type supported on this controller attribute file: - - 'supported_mem_type' - - This attribute file displays the memory type, usually - buffered and unbuffered DIMMs. - - Memory Controller name attribute file: 'mc_name' @@ -321,16 +285,6 @@ Memory Controller name attribute file: that is being utilized. -Memory Controller Module name attribute file: - - 'module_name' - - This attribute file displays the memory controller module name, - version and date built. The name of the memory controller - hardware - some drivers work with multiple controllers and - this field shows which hardware is present. - - Total memory managed by this memory controller attribute file: 'size_mb' @@ -432,6 +386,9 @@ Memory Type attribute file: This attribute file will display what type of memory is currently on this csrow. Normally, either buffered or unbuffered memory. + Examples: + Registered-DDR + Unbuffered-DDR EDAC Mode of operation attribute file: @@ -446,8 +403,13 @@ Device type attribute file: 'dev_type' - This attribute file will display what type of DIMM device is - being utilized. Example: x4 + This attribute file will display what type of DRAM device is + being utilized on this DIMM. + Examples: + x1 + x2 + x4 + x8 Channel 0 CE Count attribute file: @@ -522,10 +484,10 @@ SYSTEM LOGGING If logging for UEs and CEs are enabled then system logs will have error notices indicating errors that have been detected: -MC0: CE page 0x283, offset 0xce0, grain 8, syndrome 0x6ec3, row 0, +EDAC MC0: CE page 0x283, offset 0xce0, grain 8, syndrome 0x6ec3, row 0, channel 1 "DIMM_B1": amd76x_edac -MC0: CE page 0x1e5, offset 0xfb0, grain 8, syndrome 0xb741, row 0, +EDAC MC0: CE page 0x1e5, offset 0xfb0, grain 8, syndrome 0xb741, row 0, channel 1 "DIMM_B1": amd76x_edac @@ -610,64 +572,4 @@ Parity Count: -PCI Device Whitelist: - - 'pci_parity_whitelist' - - This control file allows for an explicit list of PCI devices to be - scanned for parity errors. Only devices found on this list will - be examined. The list is a line of hexadecimal VENDOR and DEVICE - ID tuples: - - 1022:7450,1434:16a6 - - One or more can be inserted, separated by a comma. - - To write the above list doing the following as one command line: - - echo "1022:7450,1434:16a6" - > /sys/devices/system/edac/pci/pci_parity_whitelist - - - - To display what the whitelist is, simply 'cat' the same file. - - -PCI Device Blacklist: - - 'pci_parity_blacklist' - - This control file allows for a list of PCI devices to be - skipped for scanning. - The list is a line of hexadecimal VENDOR and DEVICE ID tuples: - - 1022:7450,1434:16a6 - - One or more can be inserted, separated by a comma. - - To write the above list doing the following as one command line: - - echo "1022:7450,1434:16a6" - > /sys/devices/system/edac/pci/pci_parity_blacklist - - - To display what the whitelist currently contains, - simply 'cat' the same file. - ======================================================================= - -PCI Vendor and Devices IDs can be obtained with the lspci command. Using -the -n option lspci will display the vendor and device IDs. The system -administrator will have to determine which devices should be scanned or -skipped. - - - -The two lists (white and black) are prioritized. blacklist is the lower -priority and will NOT be utilized when a whitelist has been set. -Turn OFF a whitelist by an empty echo command: - - echo > /sys/devices/system/edac/pci/pci_parity_whitelist - -and any previous blacklist will be utilized. - diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index 3a7cfe88b169..4bde30bb3be7 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -1,6 +1,6 @@ /* * edac_mc kernel module - * (C) 2005 Linux Networx (http://lnxi.com) + * (C) 2005, 2006 Linux Networx (http://lnxi.com) * This file may be distributed under the terms of the * GNU General Public License. * @@ -33,13 +33,8 @@ #include #include "edac_mc.h" -#define EDAC_MC_VERSION "Ver: 2.0.0 " __DATE__ +#define EDAC_MC_VERSION "Ver: 2.0.1 " __DATE__ -/* For now, disable the EDAC sysfs code. The sysfs interface that EDAC - * presents to user space needs more thought, and is likely to change - * substantially. - */ -#define DISABLE_EDAC_SYSFS #ifdef CONFIG_EDAC_DEBUG /* Values of 0 to 4 will generate output */ @@ -64,31 +59,12 @@ static int check_pci_parity = 0; /* default YES check PCI parity */ static int panic_on_pci_parity; /* default no panic on PCI Parity */ static atomic_t pci_parity_count = ATOMIC_INIT(0); -/* Structure of the whitelist and blacklist arrays */ -struct edac_pci_device_list { - unsigned int vendor; /* Vendor ID */ - unsigned int device; /* Deviice ID */ -}; - -#define MAX_LISTED_PCI_DEVICES 32 - -/* List of PCI devices (vendor-id:device-id) that should be skipped */ -static struct edac_pci_device_list pci_blacklist[MAX_LISTED_PCI_DEVICES]; -static int pci_blacklist_count; - -/* List of PCI devices (vendor-id:device-id) that should be scanned */ -static struct edac_pci_device_list pci_whitelist[MAX_LISTED_PCI_DEVICES]; -static int pci_whitelist_count ; - -#ifndef DISABLE_EDAC_SYSFS static struct kobject edac_pci_kobj; /* /sys/devices/system/edac/pci */ static struct completion edac_pci_kobj_complete; -#endif /* DISABLE_EDAC_SYSFS */ #endif /* CONFIG_PCI */ /* START sysfs data and methods */ -#ifndef DISABLE_EDAC_SYSFS static const char *mem_types[] = { [MEM_EMPTY] = "Empty", @@ -147,18 +123,10 @@ static struct completion edac_memctrl_kobj_complete; * /sys/devices/system/edac/mc; * data structures and methods */ -#if 0 -static ssize_t memctrl_string_show(void *ptr, char *buffer) -{ - char *value = (char*) ptr; - return sprintf(buffer, "%s\n", value); -} -#endif - static ssize_t memctrl_int_show(void *ptr, char *buffer) { int *value = (int*) ptr; - return sprintf(buffer, "%d\n", *value); + return sprintf(buffer, "%u\n", *value); } static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count) @@ -224,11 +192,6 @@ struct memctrl_dev_attribute attr_##_name = { \ .store = _store, \ }; -/* cwrow attribute f*/ -#if 0 -MEMCTRL_STRING_ATTR(mc_version,EDAC_MC_VERSION,S_IRUGO,memctrl_string_show,NULL); -#endif - /* csrow control files */ MEMCTRL_ATTR(panic_on_ue,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store); MEMCTRL_ATTR(log_ue,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store); @@ -257,8 +220,6 @@ static struct kobj_type ktype_memctrl = { .default_attrs = (struct attribute **) memctrl_attr, }; -#endif /* DISABLE_EDAC_SYSFS */ - /* Initialize the main sysfs entries for edac: * /sys/devices/system/edac * @@ -268,11 +229,6 @@ static struct kobj_type ktype_memctrl = { * !0 FAILURE */ static int edac_sysfs_memctrl_setup(void) -#ifdef DISABLE_EDAC_SYSFS -{ - return 0; -} -#else { int err=0; @@ -304,7 +260,6 @@ static int edac_sysfs_memctrl_setup(void) return err; } -#endif /* DISABLE_EDAC_SYSFS */ /* * MC teardown: @@ -312,7 +267,6 @@ static int edac_sysfs_memctrl_setup(void) */ static void edac_sysfs_memctrl_teardown(void) { -#ifndef DISABLE_EDAC_SYSFS debugf0("MC: " __FILE__ ": %s()\n", __func__); /* Unregister the MC's kobject and wait for reference count to reach @@ -324,144 +278,9 @@ static void edac_sysfs_memctrl_teardown(void) /* Unregister the 'edac' object */ sysdev_class_unregister(&edac_class); -#endif /* DISABLE_EDAC_SYSFS */ } #ifdef CONFIG_PCI - -#ifndef DISABLE_EDAC_SYSFS - -/* - * /sys/devices/system/edac/pci; - * data structures and methods - */ - -struct list_control { - struct edac_pci_device_list *list; - int *count; -}; - -#if 0 -/* Output the list as: vendor_id:device:id<,vendor_id:device_id> */ -static ssize_t edac_pci_list_string_show(void *ptr, char *buffer) -{ - struct list_control *listctl; - struct edac_pci_device_list *list; - char *p = buffer; - int len=0; - int i; - - listctl = ptr; - list = listctl->list; - - for (i = 0; i < *(listctl->count); i++, list++ ) { - if (len > 0) - len += snprintf(p + len, (PAGE_SIZE-len), ","); - - len += snprintf(p + len, - (PAGE_SIZE-len), - "%x:%x", - list->vendor,list->device); - } - - len += snprintf(p + len,(PAGE_SIZE-len), "\n"); - return (ssize_t) len; -} - -/** - * - * Scan string from **s to **e looking for one 'vendor:device' tuple - * where each field is a hex value - * - * return 0 if an entry is NOT found - * return 1 if an entry is found - * fill in *vendor_id and *device_id with values found - * - * In both cases, make sure *s has been moved forward toward *e - */ -static int parse_one_device(const char **s,const char **e, - unsigned int *vendor_id, unsigned int *device_id) -{ - const char *runner, *p; - - /* if null byte, we are done */ - if (!**s) { - (*s)++; /* keep *s moving */ - return 0; - } - - /* skip over newlines & whitespace */ - if ((**s == '\n') || isspace(**s)) { - (*s)++; - return 0; - } - - if (!isxdigit(**s)) { - (*s)++; - return 0; - } - - /* parse vendor_id */ - runner = *s; - - while (runner < *e) { - /* scan for vendor:device delimiter */ - if (*runner == ':') { - *vendor_id = simple_strtol((char*) *s, (char**) &p, 16); - runner = p + 1; - break; - } - - runner++; - } - - if (!isxdigit(*runner)) { - *s = ++runner; - return 0; - } - - /* parse device_id */ - if (runner < *e) { - *device_id = simple_strtol((char*)runner, (char**)&p, 16); - runner = p; - } - - *s = runner; - return 1; -} - -static ssize_t edac_pci_list_string_store(void *ptr, const char *buffer, - size_t count) -{ - struct list_control *listctl; - struct edac_pci_device_list *list; - unsigned int vendor_id, device_id; - const char *s, *e; - int *index; - - s = (char*)buffer; - e = s + count; - listctl = ptr; - list = listctl->list; - index = listctl->count; - *index = 0; - - while (*index < MAX_LISTED_PCI_DEVICES) { - if (parse_one_device(&s,&e,&vendor_id,&device_id)) { - list[ *index ].vendor = vendor_id; - list[ *index ].device = device_id; - (*index)++; - } - - /* check for all data consume */ - if (s >= e) - break; - } - - return count; -} - -#endif static ssize_t edac_pci_int_show(void *ptr, char *buffer) { int *value = ptr; @@ -529,31 +348,6 @@ struct edac_pci_dev_attribute edac_pci_attr_##_name = { \ .store = _store, \ }; -#if 0 -static struct list_control pci_whitelist_control = { - .list = pci_whitelist, - .count = &pci_whitelist_count -}; - -static struct list_control pci_blacklist_control = { - .list = pci_blacklist, - .count = &pci_blacklist_count -}; - -/* whitelist attribute */ -EDAC_PCI_STRING_ATTR(pci_parity_whitelist, - &pci_whitelist_control, - S_IRUGO|S_IWUSR, - edac_pci_list_string_show, - edac_pci_list_string_store); - -EDAC_PCI_STRING_ATTR(pci_parity_blacklist, - &pci_blacklist_control, - S_IRUGO|S_IWUSR, - edac_pci_list_string_show, - edac_pci_list_string_store); -#endif - /* PCI Parity control files */ EDAC_PCI_ATTR(check_pci_parity, S_IRUGO|S_IWUSR, edac_pci_int_show, edac_pci_int_store); @@ -582,18 +376,11 @@ static struct kobj_type ktype_edac_pci = { .default_attrs = (struct attribute **) edac_pci_attr, }; -#endif /* DISABLE_EDAC_SYSFS */ - /** * edac_sysfs_pci_setup() * */ static int edac_sysfs_pci_setup(void) -#ifdef DISABLE_EDAC_SYSFS -{ - return 0; -} -#else { int err; @@ -617,16 +404,13 @@ static int edac_sysfs_pci_setup(void) return err; } -#endif /* DISABLE_EDAC_SYSFS */ static void edac_sysfs_pci_teardown(void) { -#ifndef DISABLE_EDAC_SYSFS debugf0("%s()\n", __func__); init_completion(&edac_pci_kobj_complete); kobject_unregister(&edac_pci_kobj); wait_for_completion(&edac_pci_kobj_complete); -#endif } @@ -755,36 +539,6 @@ static void edac_pci_dev_parity_test(struct pci_dev *dev) } } -/* - * check_dev_on_list: Scan for a PCI device on a white/black list - * @list: an EDAC &edac_pci_device_list white/black list pointer - * @free_index: index of next free entry on the list - * @pci_dev: PCI Device pointer - * - * see if list contains the device. - * - * Returns: 0 not found - * 1 found on list - */ -static int check_dev_on_list(struct edac_pci_device_list *list, - int free_index, struct pci_dev *dev) -{ - int i; - int rc = 0; /* Assume not found */ - unsigned short vendor=dev->vendor; - unsigned short device=dev->device; - - /* Scan the list, looking for a vendor/device match */ - for (i = 0; i < free_index; i++, list++ ) { - if ((list->vendor == vendor ) && (list->device == device )) { - rc = 1; - break; - } - } - - return rc; -} - /* * pci_dev parity list iterator * Scan the PCI device list for one iteration, looking for SERRORs @@ -799,22 +553,7 @@ static inline void edac_pci_dev_parity_iterator(pci_parity_check_fn_t fn) * bumped until we are done with it */ while((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - /* if whitelist exists then it has priority, so only scan - * those devices on the whitelist - */ - if (pci_whitelist_count > 0 ) { - if (check_dev_on_list(pci_whitelist, - pci_whitelist_count, dev)) - fn(dev); - } else { - /* - * if no whitelist, then check if this devices is - * blacklisted - */ - if (!check_dev_on_list(pci_blacklist, - pci_blacklist_count, dev)) - fn(dev); - } + fn(dev); } } @@ -855,154 +594,101 @@ static inline void clear_pci_parity_errors(void) #else /* CONFIG_PCI */ -static inline void do_pci_parity_check(void) -{ - /* no-op */ -} +/* pre-process these away */ +#define do_pci_parity_check() +#define clear_pci_parity_errors() +#define edac_sysfs_pci_teardown() +#define edac_sysfs_pci_setup() (0) -static inline void clear_pci_parity_errors(void) -{ - /* no-op */ -} - -static void edac_sysfs_pci_teardown(void) -{ -} - -static int edac_sysfs_pci_setup(void) -{ - return 0; -} #endif /* CONFIG_PCI */ -#ifndef DISABLE_EDAC_SYSFS +/* EDAC sysfs CSROW data structures and methods + */ -/* EDAC sysfs CSROW data structures and methods */ - -/* Set of more detailed csrow attribute show/store functions */ -static ssize_t csrow_ch0_dimm_label_show(struct csrow_info *csrow, char *data) -{ - ssize_t size = 0; - - if (csrow->nr_channels > 0) { - size = snprintf(data, EDAC_MC_LABEL_LEN,"%s\n", - csrow->channels[0].label); - } - - return size; -} - -static ssize_t csrow_ch1_dimm_label_show(struct csrow_info *csrow, char *data) -{ - ssize_t size = 0; - - if (csrow->nr_channels > 0) { - size = snprintf(data, EDAC_MC_LABEL_LEN, "%s\n", - csrow->channels[1].label); - } - - return size; -} - -static ssize_t csrow_ch0_dimm_label_store(struct csrow_info *csrow, - const char *data, size_t size) -{ - ssize_t max_size = 0; - - if (csrow->nr_channels > 0) { - max_size = min((ssize_t)size,(ssize_t)EDAC_MC_LABEL_LEN-1); - strncpy(csrow->channels[0].label, data, max_size); - csrow->channels[0].label[max_size] = '\0'; - } - - return size; -} - -static ssize_t csrow_ch1_dimm_label_store(struct csrow_info *csrow, - const char *data, size_t size) -{ - ssize_t max_size = 0; - - if (csrow->nr_channels > 1) { - max_size = min((ssize_t)size,(ssize_t)EDAC_MC_LABEL_LEN-1); - strncpy(csrow->channels[1].label, data, max_size); - csrow->channels[1].label[max_size] = '\0'; - } - - return max_size; -} - -static ssize_t csrow_ue_count_show(struct csrow_info *csrow, char *data) +/* Set of more default csrow attribute show/store functions */ +static ssize_t csrow_ue_count_show(struct csrow_info *csrow, char *data, int private) { return sprintf(data,"%u\n", csrow->ue_count); } -static ssize_t csrow_ce_count_show(struct csrow_info *csrow, char *data) +static ssize_t csrow_ce_count_show(struct csrow_info *csrow, char *data, int private) { return sprintf(data,"%u\n", csrow->ce_count); } -static ssize_t csrow_ch0_ce_count_show(struct csrow_info *csrow, char *data) -{ - ssize_t size = 0; - - if (csrow->nr_channels > 0) { - size = sprintf(data,"%u\n", csrow->channels[0].ce_count); - } - - return size; -} - -static ssize_t csrow_ch1_ce_count_show(struct csrow_info *csrow, char *data) -{ - ssize_t size = 0; - - if (csrow->nr_channels > 1) { - size = sprintf(data,"%u\n", csrow->channels[1].ce_count); - } - - return size; -} - -static ssize_t csrow_size_show(struct csrow_info *csrow, char *data) +static ssize_t csrow_size_show(struct csrow_info *csrow, char *data, int private) { return sprintf(data,"%u\n", PAGES_TO_MiB(csrow->nr_pages)); } -static ssize_t csrow_mem_type_show(struct csrow_info *csrow, char *data) +static ssize_t csrow_mem_type_show(struct csrow_info *csrow, char *data, int private) { return sprintf(data,"%s\n", mem_types[csrow->mtype]); } -static ssize_t csrow_dev_type_show(struct csrow_info *csrow, char *data) +static ssize_t csrow_dev_type_show(struct csrow_info *csrow, char *data, int private) { return sprintf(data,"%s\n", dev_types[csrow->dtype]); } -static ssize_t csrow_edac_mode_show(struct csrow_info *csrow, char *data) +static ssize_t csrow_edac_mode_show(struct csrow_info *csrow, char *data, int private) { return sprintf(data,"%s\n", edac_caps[csrow->edac_mode]); } +/* show/store functions for DIMM Label attributes */ +static ssize_t channel_dimm_label_show(struct csrow_info *csrow, + char *data, int channel) +{ + return snprintf(data, EDAC_MC_LABEL_LEN,"%s", + csrow->channels[channel].label); +} + +static ssize_t channel_dimm_label_store(struct csrow_info *csrow, + const char *data, + size_t count, + int channel) +{ + ssize_t max_size = 0; + + max_size = min((ssize_t)count,(ssize_t)EDAC_MC_LABEL_LEN-1); + strncpy(csrow->channels[channel].label, data, max_size); + csrow->channels[channel].label[max_size] = '\0'; + + return max_size; +} + +/* show function for dynamic chX_ce_count attribute */ +static ssize_t channel_ce_count_show(struct csrow_info *csrow, + char *data, + int channel) +{ + return sprintf(data, "%u\n", csrow->channels[channel].ce_count); +} + +/* csrow specific attribute structure */ struct csrowdev_attribute { struct attribute attr; - ssize_t (*show)(struct csrow_info *,char *); - ssize_t (*store)(struct csrow_info *, const char *,size_t); + ssize_t (*show)(struct csrow_info *,char *,int); + ssize_t (*store)(struct csrow_info *, const char *,size_t,int); + int private; }; #define to_csrow(k) container_of(k, struct csrow_info, kobj) #define to_csrowdev_attr(a) container_of(a, struct csrowdev_attribute, attr) -/* Set of show/store higher level functions for csrow objects */ -static ssize_t csrowdev_show(struct kobject *kobj, struct attribute *attr, - char *buffer) +/* Set of show/store higher level functions for default csrow attributes */ +static ssize_t csrowdev_show(struct kobject *kobj, + struct attribute *attr, + char *buffer) { struct csrow_info *csrow = to_csrow(kobj); struct csrowdev_attribute *csrowdev_attr = to_csrowdev_attr(attr); if (csrowdev_attr->show) - return csrowdev_attr->show(csrow, buffer); - + return csrowdev_attr->show(csrow, + buffer, + csrowdev_attr->private); return -EIO; } @@ -1013,8 +699,10 @@ static ssize_t csrowdev_store(struct kobject *kobj, struct attribute *attr, struct csrowdev_attribute * csrowdev_attr = to_csrowdev_attr(attr); if (csrowdev_attr->store) - return csrowdev_attr->store(csrow, buffer, count); - + return csrowdev_attr->store(csrow, + buffer, + count, + csrowdev_attr->private); return -EIO; } @@ -1023,69 +711,157 @@ static struct sysfs_ops csrowfs_ops = { .store = csrowdev_store }; -#define CSROWDEV_ATTR(_name,_mode,_show,_store) \ +#define CSROWDEV_ATTR(_name,_mode,_show,_store,_private) \ struct csrowdev_attribute attr_##_name = { \ .attr = {.name = __stringify(_name), .mode = _mode }, \ .show = _show, \ .store = _store, \ + .private = _private, \ }; -/* cwrow/attribute files */ -CSROWDEV_ATTR(size_mb,S_IRUGO,csrow_size_show,NULL); -CSROWDEV_ATTR(dev_type,S_IRUGO,csrow_dev_type_show,NULL); -CSROWDEV_ATTR(mem_type,S_IRUGO,csrow_mem_type_show,NULL); -CSROWDEV_ATTR(edac_mode,S_IRUGO,csrow_edac_mode_show,NULL); -CSROWDEV_ATTR(ue_count,S_IRUGO,csrow_ue_count_show,NULL); -CSROWDEV_ATTR(ce_count,S_IRUGO,csrow_ce_count_show,NULL); -CSROWDEV_ATTR(ch0_ce_count,S_IRUGO,csrow_ch0_ce_count_show,NULL); -CSROWDEV_ATTR(ch1_ce_count,S_IRUGO,csrow_ch1_ce_count_show,NULL); +/* default cwrow/attribute files */ +CSROWDEV_ATTR(size_mb,S_IRUGO,csrow_size_show,NULL,0); +CSROWDEV_ATTR(dev_type,S_IRUGO,csrow_dev_type_show,NULL,0); +CSROWDEV_ATTR(mem_type,S_IRUGO,csrow_mem_type_show,NULL,0); +CSROWDEV_ATTR(edac_mode,S_IRUGO,csrow_edac_mode_show,NULL,0); +CSROWDEV_ATTR(ue_count,S_IRUGO,csrow_ue_count_show,NULL,0); +CSROWDEV_ATTR(ce_count,S_IRUGO,csrow_ce_count_show,NULL,0); -/* control/attribute files */ -CSROWDEV_ATTR(ch0_dimm_label,S_IRUGO|S_IWUSR, - csrow_ch0_dimm_label_show, - csrow_ch0_dimm_label_store); -CSROWDEV_ATTR(ch1_dimm_label,S_IRUGO|S_IWUSR, - csrow_ch1_dimm_label_show, - csrow_ch1_dimm_label_store); - -/* Attributes of the CSROW object */ -static struct csrowdev_attribute *csrow_attr[] = { +/* default attributes of the CSROW object */ +static struct csrowdev_attribute *default_csrow_attr[] = { &attr_dev_type, &attr_mem_type, &attr_edac_mode, &attr_size_mb, &attr_ue_count, &attr_ce_count, - &attr_ch0_ce_count, - &attr_ch1_ce_count, - &attr_ch0_dimm_label, - &attr_ch1_dimm_label, NULL, }; -/* No memory to release */ + +/* possible dynamic channel DIMM Label attribute files */ +CSROWDEV_ATTR(ch0_dimm_label,S_IRUGO|S_IWUSR, + channel_dimm_label_show, + channel_dimm_label_store, + 0 ); +CSROWDEV_ATTR(ch1_dimm_label,S_IRUGO|S_IWUSR, + channel_dimm_label_show, + channel_dimm_label_store, + 1 ); +CSROWDEV_ATTR(ch2_dimm_label,S_IRUGO|S_IWUSR, + channel_dimm_label_show, + channel_dimm_label_store, + 2 ); +CSROWDEV_ATTR(ch3_dimm_label,S_IRUGO|S_IWUSR, + channel_dimm_label_show, + channel_dimm_label_store, + 3 ); +CSROWDEV_ATTR(ch4_dimm_label,S_IRUGO|S_IWUSR, + channel_dimm_label_show, + channel_dimm_label_store, + 4 ); +CSROWDEV_ATTR(ch5_dimm_label,S_IRUGO|S_IWUSR, + channel_dimm_label_show, + channel_dimm_label_store, + 5 ); + +/* Total possible dynamic DIMM Label attribute file table */ +static struct csrowdev_attribute *dynamic_csrow_dimm_attr[] = { + &attr_ch0_dimm_label, + &attr_ch1_dimm_label, + &attr_ch2_dimm_label, + &attr_ch3_dimm_label, + &attr_ch4_dimm_label, + &attr_ch5_dimm_label +}; + +/* possible dynamic channel ce_count attribute files */ +CSROWDEV_ATTR(ch0_ce_count,S_IRUGO|S_IWUSR, + channel_ce_count_show, + NULL, + 0 ); +CSROWDEV_ATTR(ch1_ce_count,S_IRUGO|S_IWUSR, + channel_ce_count_show, + NULL, + 1 ); +CSROWDEV_ATTR(ch2_ce_count,S_IRUGO|S_IWUSR, + channel_ce_count_show, + NULL, + 2 ); +CSROWDEV_ATTR(ch3_ce_count,S_IRUGO|S_IWUSR, + channel_ce_count_show, + NULL, + 3 ); +CSROWDEV_ATTR(ch4_ce_count,S_IRUGO|S_IWUSR, + channel_ce_count_show, + NULL, + 4 ); +CSROWDEV_ATTR(ch5_ce_count,S_IRUGO|S_IWUSR, + channel_ce_count_show, + NULL, + 5 ); + +/* Total possible dynamic ce_count attribute file table */ +static struct csrowdev_attribute *dynamic_csrow_ce_count_attr[] = { + &attr_ch0_ce_count, + &attr_ch1_ce_count, + &attr_ch2_ce_count, + &attr_ch3_ce_count, + &attr_ch4_ce_count, + &attr_ch5_ce_count +}; + + +#define EDAC_NR_CHANNELS 6 + +/* Create dynamic CHANNEL files, indexed by 'chan', under specifed CSROW */ +static int edac_create_channel_files(struct kobject *kobj, int chan) +{ + int err=-ENODEV; + + if (chan >= EDAC_NR_CHANNELS) + return err; + + /* create the DIMM label attribute file */ + err = sysfs_create_file(kobj, + (struct attribute *) dynamic_csrow_dimm_attr[chan]); + + if (!err) { + /* create the CE Count attribute file */ + err = sysfs_create_file(kobj, + (struct attribute *) dynamic_csrow_ce_count_attr[chan]); + } else { + debugf1("%s() dimm labels and ce_count files created", __func__); + } + + return err; +} + +/* No memory to release for this kobj */ static void edac_csrow_instance_release(struct kobject *kobj) { struct csrow_info *cs; - debugf1("%s()\n", __func__); cs = container_of(kobj, struct csrow_info, kobj); complete(&cs->kobj_complete); } +/* the kobj_type instance for a CSROW */ static struct kobj_type ktype_csrow = { .release = edac_csrow_instance_release, .sysfs_ops = &csrowfs_ops, - .default_attrs = (struct attribute **) csrow_attr, + .default_attrs = (struct attribute **) default_csrow_attr, }; /* Create a CSROW object under specifed edac_mc_device */ -static int edac_create_csrow_object(struct kobject *edac_mci_kobj, - struct csrow_info *csrow, int index) +static int edac_create_csrow_object( + struct kobject *edac_mci_kobj, + struct csrow_info *csrow, + int index) { int err = 0; + int chan; - debugf0("%s()\n", __func__); memset(&csrow->kobj, 0, sizeof(csrow->kobj)); /* generate ..../edac/mc/mc/csrow */ @@ -1095,21 +871,27 @@ static int edac_create_csrow_object(struct kobject *edac_mci_kobj, /* name this instance of csrow */ err = kobject_set_name(&csrow->kobj,"csrow%d",index); + if (err) + goto error_exit; + /* Instanstiate the csrow object */ + err = kobject_register(&csrow->kobj); if (!err) { - /* Instanstiate the csrow object */ - err = kobject_register(&csrow->kobj); - - if (err) - debugf0("Failed to register CSROW%d\n",index); - else - debugf0("Registered CSROW%d\n",index); + /* Create the dyanmic attribute files on this csrow, + * namely, the DIMM labels and the channel ce_count + */ + for (chan = 0; chan < csrow->nr_channels; chan++) { + err = edac_create_channel_files(&csrow->kobj,chan); + if (err) + break; + } } +error_exit: return err; } -/* sysfs data structures and methods for the MCI kobjects */ +/* default sysfs methods and data structures for the main MCI kobject */ static ssize_t mci_reset_counters_store(struct mem_ctl_info *mci, const char *data, size_t count) @@ -1135,6 +917,7 @@ static ssize_t mci_reset_counters_store(struct mem_ctl_info *mci, return count; } +/* default attribute files for the MCI object */ static ssize_t mci_ue_count_show(struct mem_ctl_info *mci, char *data) { return sprintf(data,"%d\n", mci->ue_count); @@ -1160,71 +943,11 @@ static ssize_t mci_seconds_show(struct mem_ctl_info *mci, char *data) return sprintf(data,"%ld\n", (jiffies - mci->start_time) / HZ); } -static ssize_t mci_mod_name_show(struct mem_ctl_info *mci, char *data) -{ - return sprintf(data,"%s %s\n", mci->mod_name, mci->mod_ver); -} - static ssize_t mci_ctl_name_show(struct mem_ctl_info *mci, char *data) { return sprintf(data,"%s\n", mci->ctl_name); } -static int mci_output_edac_cap(char *buf, unsigned long edac_cap) -{ - char *p = buf; - int bit_idx; - - for (bit_idx = 0; bit_idx < 8 * sizeof(edac_cap); bit_idx++) { - if ((edac_cap >> bit_idx) & 0x1) - p += sprintf(p, "%s ", edac_caps[bit_idx]); - } - - return p - buf; -} - -static ssize_t mci_edac_capability_show(struct mem_ctl_info *mci, char *data) -{ - char *p = data; - - p += mci_output_edac_cap(p,mci->edac_ctl_cap); - p += sprintf(p, "\n"); - return p - data; -} - -static ssize_t mci_edac_current_capability_show(struct mem_ctl_info *mci, - char *data) -{ - char *p = data; - - p += mci_output_edac_cap(p,mci->edac_cap); - p += sprintf(p, "\n"); - return p - data; -} - -static int mci_output_mtype_cap(char *buf, unsigned long mtype_cap) -{ - char *p = buf; - int bit_idx; - - for (bit_idx = 0; bit_idx < 8 * sizeof(mtype_cap); bit_idx++) { - if ((mtype_cap >> bit_idx) & 0x1) - p += sprintf(p, "%s ", mem_types[bit_idx]); - } - - return p - buf; -} - -static ssize_t mci_supported_mem_type_show(struct mem_ctl_info *mci, - char *data) -{ - char *p = data; - - p += mci_output_mtype_cap(p,mci->mtype_cap); - p += sprintf(p, "\n"); - return p - data; -} - static ssize_t mci_size_mb_show(struct mem_ctl_info *mci, char *data) { int total_pages, csrow_idx; @@ -1251,6 +974,7 @@ struct mcidev_attribute { #define to_mci(k) container_of(k, struct mem_ctl_info, edac_mci_kobj) #define to_mcidev_attr(a) container_of(a, struct mcidev_attribute, attr) +/* MCI show/store functions for top most object */ static ssize_t mcidev_show(struct kobject *kobj, struct attribute *attr, char *buffer) { @@ -1287,31 +1011,21 @@ struct mcidev_attribute mci_attr_##_name = { \ .store = _store, \ }; -/* Control file */ +/* default Control file */ MCIDEV_ATTR(reset_counters,S_IWUSR,NULL,mci_reset_counters_store); -/* Attribute files */ +/* default Attribute files */ MCIDEV_ATTR(mc_name,S_IRUGO,mci_ctl_name_show,NULL); -MCIDEV_ATTR(module_name,S_IRUGO,mci_mod_name_show,NULL); -MCIDEV_ATTR(edac_capability,S_IRUGO,mci_edac_capability_show,NULL); MCIDEV_ATTR(size_mb,S_IRUGO,mci_size_mb_show,NULL); MCIDEV_ATTR(seconds_since_reset,S_IRUGO,mci_seconds_show,NULL); MCIDEV_ATTR(ue_noinfo_count,S_IRUGO,mci_ue_noinfo_show,NULL); MCIDEV_ATTR(ce_noinfo_count,S_IRUGO,mci_ce_noinfo_show,NULL); MCIDEV_ATTR(ue_count,S_IRUGO,mci_ue_count_show,NULL); MCIDEV_ATTR(ce_count,S_IRUGO,mci_ce_count_show,NULL); -MCIDEV_ATTR(edac_current_capability,S_IRUGO, - mci_edac_current_capability_show,NULL); -MCIDEV_ATTR(supported_mem_type,S_IRUGO, - mci_supported_mem_type_show,NULL); static struct mcidev_attribute *mci_attr[] = { &mci_attr_reset_counters, - &mci_attr_module_name, &mci_attr_mc_name, - &mci_attr_edac_capability, - &mci_attr_edac_current_capability, - &mci_attr_supported_mem_type, &mci_attr_size_mb, &mci_attr_seconds_since_reset, &mci_attr_ue_noinfo_count, @@ -1339,7 +1053,6 @@ static struct kobj_type ktype_mci = { .default_attrs = (struct attribute **) mci_attr, }; -#endif /* DISABLE_EDAC_SYSFS */ #define EDAC_DEVICE_SYMLINK "device" @@ -1352,11 +1065,6 @@ static struct kobj_type ktype_mci = { * !0 Failure */ static int edac_create_sysfs_mci_device(struct mem_ctl_info *mci) -#ifdef DISABLE_EDAC_SYSFS -{ - return 0; -} -#else { int i; int err; @@ -1368,7 +1076,6 @@ static int edac_create_sysfs_mci_device(struct mem_ctl_info *mci) /* set the name of the mc object */ err = kobject_set_name(edac_mci_kobj,"mc%d",mci->mc_idx); - if (err) return err; @@ -1378,14 +1085,12 @@ static int edac_create_sysfs_mci_device(struct mem_ctl_info *mci) /* register the mc kobject */ err = kobject_register(edac_mci_kobj); - if (err) return err; /* create a symlink for the device */ err = sysfs_create_link(edac_mci_kobj, &mci->dev->kobj, EDAC_DEVICE_SYMLINK); - if (err) goto fail0; @@ -1398,7 +1103,6 @@ static int edac_create_sysfs_mci_device(struct mem_ctl_info *mci) /* Only expose populated CSROWs */ if (csrow->nr_pages > 0) { err = edac_create_csrow_object(edac_mci_kobj,csrow,i); - if (err) goto fail1; } @@ -1422,14 +1126,12 @@ fail0: wait_for_completion(&mci->kobj_complete); return err; } -#endif /* DISABLE_EDAC_SYSFS */ /* * remove a Memory Controller instance */ static void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci) { -#ifndef DISABLE_EDAC_SYSFS int i; debugf0("%s()\n", __func__); @@ -1447,7 +1149,6 @@ static void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci) init_completion(&mci->kobj_complete); kobject_unregister(&mci->edac_mci_kobj); wait_for_completion(&mci->kobj_complete); -#endif /* DISABLE_EDAC_SYSFS */ } /* END OF sysfs data and methods */