diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 2e76c3476e2a..31b3a25680d0 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -888,9 +888,9 @@ memory region [offset, offset + size] for that kernel image. If '@offset' is omitted, then a suitable offset is selected automatically. - [KNL, X86-64, ARM64, RISCV] Select a region under 4G first, and - fall back to reserve region above 4G when '@offset' - hasn't been specified. + [KNL, X86-64, ARM64, RISCV, LoongArch] Select a region + under 4G first, and fall back to reserve region above + 4G when '@offset' hasn't been specified. See Documentation/admin-guide/kdump/kdump.rst for further details. crashkernel=range1:size1[,range2:size2,...][@offset] @@ -901,25 +901,27 @@ Documentation/admin-guide/kdump/kdump.rst for an example. crashkernel=size[KMG],high - [KNL, X86-64, ARM64, RISCV] range could be above 4G. + [KNL, X86-64, ARM64, RISCV, LoongArch] range could be + above 4G. Allow kernel to allocate physical memory region from top, so could be above 4G if system have more than 4G ram installed. Otherwise memory region will be allocated below 4G, if available. It will be ignored if crashkernel=X is specified. crashkernel=size[KMG],low - [KNL, X86-64, ARM64, RISCV] range under 4G. When crashkernel=X,high - is passed, kernel could allocate physical memory region - above 4G, that cause second kernel crash on system - that require some amount of low memory, e.g. swiotlb - requires at least 64M+32K low memory, also enough extra - low memory is needed to make sure DMA buffers for 32-bit - devices won't run out. Kernel would try to allocate + [KNL, X86-64, ARM64, RISCV, LoongArch] range under 4G. + When crashkernel=X,high is passed, kernel could allocate + physical memory region above 4G, that cause second kernel + crash on system that require some amount of low memory, + e.g. swiotlb requires at least 64M+32K low memory, also + enough extra low memory is needed to make sure DMA buffers + for 32-bit devices won't run out. Kernel would try to allocate default size of memory below 4G automatically. The default size is platform dependent. --> x86: max(swiotlb_size_or_default() + 8MiB, 256MiB) --> arm64: 128MiB --> riscv: 128MiB + --> loongarch: 128MiB This one lets the user specify own low range under 4G for second kernel instead. 0: to disable low allocation. diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml index 00b570c82903..60441f0c5d72 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -11,8 +11,13 @@ maintainers: description: | This interrupt controller is found in the Loongson-3 family of chips and - Loongson-2K1000 chip, as the primary package interrupt controller which + Loongson-2K series chips, as the primary package interrupt controller which can route local I/O interrupt to interrupt lines of cores. + Be aware of the following points. + 1.The Loongson-2K0500 is a single core CPU; + 2.The Loongson-2K0500/2K1000 has 64 device interrupt sources as inputs, so we + need to define two nodes in dts{i} to describe the "0-31" and "32-61" interrupt + sources respectively. allOf: - $ref: /schemas/interrupt-controller.yaml# @@ -33,6 +38,7 @@ properties: - const: main - const: isr0 - const: isr1 + minItems: 2 interrupt-controller: true @@ -45,11 +51,9 @@ properties: interrupt-names: description: List of names for the parent interrupts. items: - - const: int0 - - const: int1 - - const: int2 - - const: int3 + pattern: int[0-3] minItems: 1 + maxItems: 4 '#interrupt-cells': const: 2 @@ -69,6 +73,7 @@ required: - compatible - reg - interrupts + - interrupt-names - interrupt-controller - '#interrupt-cells' - loongson,parent_int_map @@ -86,7 +91,8 @@ if: then: properties: reg: - minItems: 3 + minItems: 2 + maxItems: 3 required: - reg-names diff --git a/Documentation/devicetree/bindings/loongarch/cpus.yaml b/Documentation/devicetree/bindings/loongarch/cpus.yaml new file mode 100644 index 000000000000..f175872995e1 --- /dev/null +++ b/Documentation/devicetree/bindings/loongarch/cpus.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/loongarch/cpus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LoongArch CPUs + +maintainers: + - Binbin Zhou + +description: + This document describes the list of LoongArch CPU cores that support FDT, + it describe the layout of CPUs in a system through the "cpus" node. + +allOf: + - $ref: /schemas/cpu.yaml# + +properties: + compatible: + enum: + - loongson,la264 + - loongson,la364 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + compatible = "loongson,la264"; + device_type = "cpu"; + reg = <0>; + clocks = <&clk LOONGSON2_NODE_CLK>; + }; + + cpu@1 { + compatible = "loongson,la264"; + device_type = "cpu"; + reg = <1>; + clocks = <&clk LOONGSON2_NODE_CLK>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/loongarch/loongson.yaml b/Documentation/devicetree/bindings/loongarch/loongson.yaml new file mode 100644 index 000000000000..e1a4a97b7576 --- /dev/null +++ b/Documentation/devicetree/bindings/loongarch/loongson.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/loongarch/loongson.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson SoC-based boards + +maintainers: + - Binbin Zhou + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Loongson-2K0500 processor based boards + items: + - const: loongson,ls2k0500-ref + - const: loongson,ls2k0500 + + - description: Loongson-2K1000 processor based boards + items: + - const: loongson,ls2k1000-ref + - const: loongson,ls2k1000 + + - description: Loongson-2K2000 processor based boards + items: + - const: loongson,ls2k2000-ref + - const: loongson,ls2k2000 + +additionalProperties: true + +... diff --git a/Documentation/rust/arch-support.rst b/Documentation/rust/arch-support.rst index b91e9ef4d0c2..73203ba1e901 100644 --- a/Documentation/rust/arch-support.rst +++ b/Documentation/rust/arch-support.rst @@ -12,10 +12,11 @@ which uses ``libclang``. Below is a general summary of architectures that currently work. Level of support corresponds to ``S`` values in the ``MAINTAINERS`` file. -============ ================ ============================================== -Architecture Level of support Constraints -============ ================ ============================================== -``um`` Maintained ``x86_64`` only. -``x86`` Maintained ``x86_64`` only. -============ ================ ============================================== +============= ================ ============================================== +Architecture Level of support Constraints +============= ================ ============================================== +``loongarch`` Maintained - +``um`` Maintained ``x86_64`` only. +``x86`` Maintained ``x86_64`` only. +============= ================ ============================================== diff --git a/MAINTAINERS b/MAINTAINERS index 2fb78ede9625..2b90c5e28100 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3692,6 +3692,13 @@ L: bpf@vger.kernel.org S: Supported F: arch/arm64/net/ +BPF JIT for LOONGARCH +M: Tiezhu Yang +R: Hengqi Chen +L: bpf@vger.kernel.org +S: Maintained +F: arch/loongarch/net/ + BPF JIT for MIPS (32-BIT AND 64-BIT) M: Johan Almbladh M: Paul Burton diff --git a/arch/loongarch/Kbuild b/arch/loongarch/Kbuild index beb8499dd8ed..bfa21465d83a 100644 --- a/arch/loongarch/Kbuild +++ b/arch/loongarch/Kbuild @@ -4,6 +4,7 @@ obj-y += net/ obj-y += vdso/ obj-$(CONFIG_KVM) += kvm/ +obj-$(CONFIG_BUILTIN_DTB) += boot/dts/ # for cleaning subdir- += boot diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig index 15d05dd2b7f3..10959e6c3583 100644 --- a/arch/loongarch/Kconfig +++ b/arch/loongarch/Kconfig @@ -142,6 +142,7 @@ config LOONGARCH select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_RETHOOK select HAVE_RSEQ + select HAVE_RUST select HAVE_SAMPLE_FTRACE_DIRECT select HAVE_SAMPLE_FTRACE_DIRECT_MULTI select HAVE_SETUP_PER_CPU_AREA if NUMA @@ -376,6 +377,24 @@ config CMDLINE_FORCE endchoice +config BUILTIN_DTB + bool "Enable built-in dtb in kernel" + depends on OF + help + Some existing systems do not provide a canonical device tree to + the kernel at boot time. Let's provide a device tree table in the + kernel, keyed by the dts filename, containing the relevant DTBs. + + Built-in DTBs are generic enough and can be used as references. + +config BUILTIN_DTB_NAME + string "Source file for built-in dtb" + depends on BUILTIN_DTB + help + Base name (without suffix, relative to arch/loongarch/boot/dts/) + for the DTS file that will be used to produce the DTB linked into + the kernel. + config DMI bool "Enable DMI scanning" select DMI_SCAN_MACHINE_NON_EFI_FALLBACK @@ -577,6 +596,9 @@ config ARCH_SELECTS_CRASH_DUMP depends on CRASH_DUMP select RELOCATABLE +config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION + def_bool CRASH_CORE + config RELOCATABLE bool "Relocatable kernel" help diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile index 4ba8d67ddb09..983aa2b1629a 100644 --- a/arch/loongarch/Makefile +++ b/arch/loongarch/Makefile @@ -6,6 +6,7 @@ boot := arch/loongarch/boot KBUILD_DEFCONFIG := loongson3_defconfig +KBUILD_DTBS := dtbs image-name-y := vmlinux image-name-$(CONFIG_EFI_ZBOOT) := vmlinuz @@ -81,8 +82,11 @@ KBUILD_AFLAGS_MODULE += -Wa,-mla-global-with-abs KBUILD_CFLAGS_MODULE += -fplt -Wa,-mla-global-with-abs,-mla-local-with-abs endif +KBUILD_RUSTFLAGS_MODULE += -Crelocation-model=pic + ifeq ($(CONFIG_RELOCATABLE),y) KBUILD_CFLAGS_KERNEL += -fPIE +KBUILD_RUSTFLAGS_KERNEL += -Crelocation-model=pie LDFLAGS_vmlinux += -static -pie --no-dynamic-linker -z notext $(call ld-option, --apply-dynamic-relocs) endif @@ -141,7 +145,7 @@ endif vdso-install-y += arch/loongarch/vdso/vdso.so.dbg -all: $(notdir $(KBUILD_IMAGE)) +all: $(notdir $(KBUILD_IMAGE)) $(KBUILD_DTBS) vmlinuz.efi: vmlinux.efi diff --git a/arch/loongarch/boot/dts/Makefile b/arch/loongarch/boot/dts/Makefile index 5f1f55e911ad..747d0c3f6389 100644 --- a/arch/loongarch/boot/dts/Makefile +++ b/arch/loongarch/boot/dts/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only -dtstree := $(srctree)/$(src) -dtb-y := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) +dtb-y = loongson-2k0500-ref.dtb loongson-2k1000-ref.dtb loongson-2k2000-ref.dtb + +obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_NAME)) diff --git a/arch/loongarch/boot/dts/loongson-2k0500-ref.dts b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts new file mode 100644 index 000000000000..b38071a4d0b0 --- /dev/null +++ b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +/dts-v1/; + +#include "loongson-2k0500.dtsi" + +/ { + compatible = "loongson,ls2k0500-ref", "loongson,ls2k0500"; + model = "Loongson-2K0500 Reference Board"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@200000 { + device_type = "memory"; + reg = <0x0 0x00200000 0x0 0x0ee00000>, + <0x0 0x90000000 0x0 0x60000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x2000000>; + linux,cma-default; + }; + }; +}; + +&gmac0 { + status = "okay"; + + phy-mode = "rgmii"; + bus_id = <0x0>; +}; + +&gmac1 { + status = "okay"; + + phy-mode = "rgmii"; + bus_id = <0x1>; +}; + +&i2c0 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + eeprom@57{ + compatible = "atmel,24c16"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&rtc0 { + status = "okay"; +}; diff --git a/arch/loongarch/boot/dts/loongson-2k0500.dtsi b/arch/loongarch/boot/dts/loongson-2k0500.dtsi new file mode 100644 index 000000000000..444779c21034 --- /dev/null +++ b/arch/loongarch/boot/dts/loongson-2k0500.dtsi @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +/dts-v1/; + +#include + +/ { + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "loongson,la264"; + device_type = "cpu"; + reg = <0x0>; + clocks = <&cpu_clk>; + }; + }; + + cpu_clk: cpu-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + }; + + cpuintc: interrupt-controller { + compatible = "loongson,cpu-interrupt-controller"; + #interrupt-cells = <1>; + interrupt-controller; + }; + + bus@10000000 { + compatible = "simple-bus"; + ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>, + <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>, + <0x0 0x20000000 0x0 0x20000000 0x0 0x10000000>, + <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>, + <0xfe 0x0 0xfe 0x0 0x0 0x40000000>; + #address-cells = <2>; + #size-cells = <2>; + + isa@16400000 { + compatible = "isa"; + #size-cells = <1>; + #address-cells = <2>; + ranges = <1 0x0 0x0 0x16400000 0x4000>; + }; + + liointc0: interrupt-controller@1fe11400 { + compatible = "loongson,liointc-2.0"; + reg = <0x0 0x1fe11400 0x0 0x40>, + <0x0 0x1fe11040 0x0 0x8>; + reg-names = "main", "isr0"; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + interrupt-names = "int0"; + + loongson,parent_int_map = <0xffffffff>, /* int0 */ + <0x00000000>, /* int1 */ + <0x00000000>, /* int2 */ + <0x00000000>; /* int3 */ + }; + + liointc1: interrupt-controller@1fe11440 { + compatible = "loongson,liointc-2.0"; + reg = <0x0 0x1fe11440 0x0 0x40>, + <0x0 0x1fe11048 0x0 0x8>; + reg-names = "main", "isr0"; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&cpuintc>; + interrupts = <4>; + interrupt-names = "int2"; + + loongson,parent_int_map = <0x00000000>, /* int0 */ + <0x00000000>, /* int1 */ + <0xffffffff>, /* int2 */ + <0x00000000>; /* int3 */ + }; + + eiointc: interrupt-controller@1fe11600 { + compatible = "loongson,ls2k0500-eiointc"; + reg = <0x0 0x1fe11600 0x0 0xea00>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&cpuintc>; + interrupts = <3>; + }; + + gmac0: ethernet@1f020000 { + compatible = "snps,dwmac-3.70a"; + reg = <0x0 0x1f020000 0x0 0x10000>; + interrupt-parent = <&liointc0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + status = "disabled"; + }; + + gmac1: ethernet@1f030000 { + compatible = "snps,dwmac-3.70a"; + reg = <0x0 0x1f030000 0x0 0x10000>; + interrupt-parent = <&liointc0>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + status = "disabled"; + }; + + sata: sata@1f040000 { + compatible = "snps,spear-ahci"; + reg = <0x0 0x1f040000 0x0 0x10000>; + interrupt-parent = <&eiointc>; + interrupts = <75>; + status = "disabled"; + }; + + ehci0: usb@1f050000 { + compatible = "generic-ehci"; + reg = <0x0 0x1f050000 0x0 0x8000>; + interrupt-parent = <&eiointc>; + interrupts = <71>; + status = "disabled"; + }; + + ohci0: usb@1f058000 { + compatible = "generic-ohci"; + reg = <0x0 0x1f058000 0x0 0x8000>; + interrupt-parent = <&eiointc>; + interrupts = <72>; + status = "disabled"; + }; + + uart0: serial@1ff40800 { + compatible = "ns16550a"; + reg = <0x0 0x1ff40800 0x0 0x10>; + clock-frequency = <100000000>; + interrupt-parent = <&eiointc>; + interrupts = <2>; + no-loopback-test; + status = "disabled"; + }; + + i2c0: i2c@1ff48000 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff48000 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <14>; + status = "disabled"; + }; + + i2c@1ff48800 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff48800 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <15>; + status = "disabled"; + }; + + i2c@1ff49000 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff49000 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <16>; + status = "disabled"; + }; + + i2c@1ff49800 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff49800 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <17>; + status = "disabled"; + }; + + i2c@1ff4a000 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff4a000 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <18>; + status = "disabled"; + }; + + i2c@1ff4a800 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff4a800 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <19>; + status = "disabled"; + }; + + pmc: power-management@1ff6c000 { + compatible = "loongson,ls2k0500-pmc", "syscon"; + reg = <0x0 0x1ff6c000 0x0 0x58>; + interrupt-parent = <&eiointc>; + interrupts = <56>; + loongson,suspend-address = <0x0 0x1c000500>; + + syscon-reboot { + compatible = "syscon-reboot"; + offset = <0x30>; + mask = <0x1>; + }; + + syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmc>; + offset = <0x14>; + mask = <0x3c00>; + value = <0x3c00>; + }; + }; + + rtc0: rtc@1ff6c100 { + compatible = "loongson,ls2k0500-rtc", "loongson,ls7a-rtc"; + reg = <0x0 0x1ff6c100 0x0 0x100>; + interrupt-parent = <&eiointc>; + interrupts = <35>; + status = "disabled"; + }; + + pcie@1a000000 { + compatible = "loongson,ls2k-pci"; + reg = <0x0 0x1a000000 0x0 0x02000000>, + <0xfe 0x0 0x0 0x20000000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x0 0x5>; + ranges = <0x01000000 0x0 0x00004000 0x0 0x16404000 0x0 0x00004000>, + <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>; + + pcie@0,0 { + reg = <0x0000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&eiointc>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 81>; + ranges; + }; + + pcie@1,0 { + reg = <0x0800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&eiointc>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 82>; + ranges; + }; + }; + }; +}; diff --git a/arch/loongarch/boot/dts/loongson-2k1000-ref.dts b/arch/loongarch/boot/dts/loongson-2k1000-ref.dts new file mode 100644 index 000000000000..132a2d1ea8bc --- /dev/null +++ b/arch/loongarch/boot/dts/loongson-2k1000-ref.dts @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +/dts-v1/; + +#include "loongson-2k1000.dtsi" + +/ { + compatible = "loongson,ls2k1000-ref", "loongson,ls2k1000"; + model = "Loongson-2K1000 Reference Board"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@200000 { + device_type = "memory"; + reg = <0x0 0x00200000 0x0 0x06e00000>, + <0x0 0x08000000 0x0 0x07000000>, + <0x0 0x90000000 0x1 0xe0000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x2000000>; + linux,cma-default; + }; + }; +}; + +&gmac0 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <&phy0>; + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&gmac1 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <&phy1>; + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + phy1: ethernet-phy@1 { + reg = <16>; + }; + }; +}; + +&i2c2 { + status = "okay"; + + pinctrl-0 = <&i2c0_pins_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + eeprom@57{ + compatible = "atmel,24c16"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +&spi0 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + spidev@0 { + compatible = "rohm,dh2228fv"; + spi-max-frequency = <100000000>; + reg = <0>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&clk { + status = "okay"; +}; + +&rtc0 { + status = "okay"; +}; + +&pctrl { + status = "okay"; + + sdio_pins_default: sdio-pins { + sdio-pinmux { + groups = "sdio"; + function = "sdio"; + }; + sdio-det-pinmux { + groups = "pwm2"; + function = "gpio"; + }; + }; + + pwm1_pins_default: pwm1-pins { + pinmux { + groups = "pwm1"; + function = "pwm1"; + }; + }; + + pwm0_pins_default: pwm0-pins { + pinmux { + groups = "pwm0"; + function = "pwm0"; + }; + }; + + i2c1_pins_default: i2c1-pins { + pinmux { + groups = "i2c1"; + function = "i2c1"; + }; + }; + + i2c0_pins_default: i2c0-pins { + pinmux { + groups = "i2c0"; + function = "i2c0"; + }; + }; + + nand_pins_default: nand-pins { + pinmux { + groups = "nand"; + function = "nand"; + }; + }; + + hda_pins_default: hda-pins { + grp0-pinmux { + groups = "hda"; + function = "hda"; + }; + grp1-pinmux { + groups = "i2s"; + function = "gpio"; + }; + }; +}; diff --git a/arch/loongarch/boot/dts/loongson-2k1000.dtsi b/arch/loongarch/boot/dts/loongson-2k1000.dtsi new file mode 100644 index 000000000000..49a70f8c3cab --- /dev/null +++ b/arch/loongarch/boot/dts/loongson-2k1000.dtsi @@ -0,0 +1,492 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +/dts-v1/; + +#include +#include +#include + +/ { + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "loongson,la264"; + device_type = "cpu"; + reg= <0x0>; + clocks = <&clk LOONGSON2_NODE_CLK>; + }; + + cpu1: cpu@1 { + compatible = "loongson,la264"; + device_type = "cpu"; + reg = <0x1>; + clocks = <&clk LOONGSON2_NODE_CLK>; + }; + }; + + ref_100m: clock-ref-100m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "ref_100m"; + }; + + cpuintc: interrupt-controller { + compatible = "loongson,cpu-interrupt-controller"; + #interrupt-cells = <1>; + interrupt-controller; + }; + + /* i2c of the dvi eeprom edid */ + i2c-gpio-0 { + compatible = "i2c-gpio"; + scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + /* i2c of the eeprom edid */ + i2c-gpio-1 { + compatible = "i2c-gpio"; + scl-gpios = <&gpio0 33 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 32 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tsensor 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <33000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_crit: cpu-crit { + temperature = <85000>; + hysteresis = <5000>; + type = "critical"; + }; + }; + }; + }; + + bus@10000000 { + compatible = "simple-bus"; + ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>, + <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>, + <0x0 0x20000000 0x0 0x20000000 0x0 0x10000000>, + <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>, + <0xfe 0x0 0xfe 0x0 0x0 0x40000000>; + #address-cells = <2>; + #size-cells = <2>; + dma-coherent; + + liointc0: interrupt-controller@1fe01400 { + compatible = "loongson,liointc-2.0"; + reg = <0x0 0x1fe01400 0x0 0x40>, + <0x0 0x1fe01040 0x0 0x8>, + <0x0 0x1fe01140 0x0 0x8>; + reg-names = "main", "isr0", "isr1"; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + interrupt-names = "int0"; + loongson,parent_int_map = <0xffffffff>, /* int0 */ + <0x00000000>, /* int1 */ + <0x00000000>, /* int2 */ + <0x00000000>; /* int3 */ + }; + + liointc1: interrupt-controller@1fe01440 { + compatible = "loongson,liointc-2.0"; + reg = <0x0 0x1fe01440 0x0 0x40>, + <0x0 0x1fe01048 0x0 0x8>, + <0x0 0x1fe01148 0x0 0x8>; + reg-names = "main", "isr0", "isr1"; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&cpuintc>; + interrupts = <3>; + interrupt-names = "int1"; + loongson,parent_int_map = <0x00000000>, /* int0 */ + <0xffffffff>, /* int1 */ + <0x00000000>, /* int2 */ + <0x00000000>; /* int3 */ + }; + + chipid@1fe00000 { + compatible = "loongson,ls2k-chipid"; + reg = <0x0 0x1fe00000 0x0 0x30>; + little-endian; + }; + + pctrl: pinctrl@1fe00420 { + compatible = "loongson,ls2k-pinctrl"; + reg = <0x0 0x1fe00420 0x0 0x18>; + status = "disabled"; + }; + + clk: clock-controller@1fe00480 { + compatible = "loongson,ls2k-clk"; + reg = <0x0 0x1fe00480 0x0 0x58>; + #clock-cells = <1>; + clocks = <&ref_100m>; + clock-names = "ref_100m"; + status = "disabled"; + }; + + gpio0: gpio@1fe00500 { + compatible = "loongson,ls2k-gpio"; + reg = <0x0 0x1fe00500 0x0 0x38>; + ngpios = <64>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pctrl 0x0 0x0 15>, + <&pctrl 16 16 15>, + <&pctrl 32 32 10>, + <&pctrl 44 44 20>; + interrupt-parent = <&liointc1>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>, + <29 IRQ_TYPE_LEVEL_HIGH>, + <30 IRQ_TYPE_LEVEL_HIGH>, + <30 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <>, + <>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>; + }; + + tsensor: thermal-sensor@1fe01500 { + compatible = "loongson,ls2k1000-thermal"; + reg = <0x0 0x1fe01500 0x0 0x30>; + interrupt-parent = <&liointc0>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; + + dma-controller@1fe00c00 { + compatible = "loongson,ls2k1000-apbdma"; + reg = <0x0 0x1fe00c00 0x0 0x8>; + interrupt-parent = <&liointc1>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LOONGSON2_APB_CLK>; + #dma-cells = <1>; + status = "disabled"; + }; + + dma-controller@1fe00c10 { + compatible = "loongson,ls2k1000-apbdma"; + reg = <0x0 0x1fe00c10 0x0 0x8>; + interrupt-parent = <&liointc1>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LOONGSON2_APB_CLK>; + #dma-cells = <1>; + status = "disabled"; + }; + + dma-controller@1fe00c20 { + compatible = "loongson,ls2k1000-apbdma"; + reg = <0x0 0x1fe00c20 0x0 0x8>; + interrupt-parent = <&liointc1>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LOONGSON2_APB_CLK>; + #dma-cells = <1>; + status = "disabled"; + }; + + dma-controller@1fe00c30 { + compatible = "loongson,ls2k1000-apbdma"; + reg = <0x0 0x1fe00c30 0x0 0x8>; + interrupt-parent = <&liointc1>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LOONGSON2_APB_CLK>; + #dma-cells = <1>; + status = "disabled"; + }; + + dma-controller@1fe00c40 { + compatible = "loongson,ls2k1000-apbdma"; + reg = <0x0 0x1fe00c40 0x0 0x8>; + interrupt-parent = <&liointc1>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LOONGSON2_APB_CLK>; + #dma-cells = <1>; + status = "disabled"; + }; + + uart0: serial@1fe20000 { + compatible = "ns16550a"; + reg = <0x0 0x1fe20000 0x0 0x10>; + clock-frequency = <125000000>; + interrupt-parent = <&liointc0>; + interrupts = <0x0 IRQ_TYPE_LEVEL_HIGH>; + no-loopback-test; + status = "disabled"; + }; + + i2c2: i2c@1fe21000 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1fe21000 0x0 0x8>; + interrupt-parent = <&liointc0>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c3: i2c@1fe21800 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1fe21800 0x0 0x8>; + interrupt-parent = <&liointc0>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pmc: power-management@1fe27000 { + compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon"; + reg = <0x0 0x1fe27000 0x0 0x58>; + interrupt-parent = <&liointc1>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + loongson,suspend-address = <0x0 0x1c000500>; + + syscon-reboot { + compatible = "syscon-reboot"; + offset = <0x30>; + mask = <0x1>; + }; + + syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmc>; + offset = <0x14>; + mask = <0x3c00>; + value = <0x3c00>; + }; + }; + + rtc0: rtc@1fe27800 { + compatible = "loongson,ls2k1000-rtc"; + reg = <0x0 0x1fe27800 0x0 0x100>; + interrupt-parent = <&liointc1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + spi0: spi@1fff0220 { + compatible = "loongson,ls2k1000-spi"; + reg = <0x0 0x1fff0220 0x0 0x10>; + clocks = <&clk LOONGSON2_BOOT_CLK>; + status = "disabled"; + }; + + pcie@1a000000 { + compatible = "loongson,ls2k-pci"; + reg = <0x0 0x1a000000 0x0 0x02000000>, + <0xfe 0x0 0x0 0x20000000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x0 0xff>; + ranges = <0x01000000 0x0 0x00008000 0x0 0x18008000 0x0 0x00008000>, + <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>; + + gmac0: ethernet@3,0 { + reg = <0x1800 0x0 0x0 0x0 0x0>; + interrupt-parent = <&liointc0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>, + <13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + status = "disabled"; + }; + + gmac1: ethernet@3,1 { + reg = <0x1900 0x0 0x0 0x0 0x0>; + interrupt-parent = <&liointc0>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>, + <15 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + status = "disabled"; + }; + + ehci0: usb@4,1 { + reg = <0x2100 0x0 0x0 0x0 0x0>; + interrupt-parent = <&liointc1>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + ohci0: usb@4,2 { + reg = <0x2200 0x0 0x0 0x0 0x0>; + interrupt-parent = <&liointc1>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + display@6,0 { + reg = <0x3000 0x0 0x0 0x0 0x0>; + interrupt-parent = <&liointc0>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + hda@7,0 { + reg = <0x3800 0x0 0x0 0x0 0x0>; + interrupt-parent = <&liointc0>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sata: sata@8,0 { + reg = <0x4000 0x0 0x0 0x0 0x0>; + interrupt-parent = <&liointc0>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pcie@9,0 { + reg = <0x4800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 0x0 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@a,0 { + reg = <0x5000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&liointc1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 1 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@b,0 { + reg = <0x5800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&liointc1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 2 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@c,0 { + reg = <0x6000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&liointc1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 3 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@d,0 { + reg = <0x6800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&liointc1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 4 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@e,0 { + reg = <0x7000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&liointc1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 5 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + }; + }; +}; diff --git a/arch/loongarch/boot/dts/loongson-2k2000-ref.dts b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts new file mode 100644 index 000000000000..dca91caf895e --- /dev/null +++ b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +/dts-v1/; + +#include "loongson-2k2000.dtsi" + +/ { + compatible = "loongson,ls2k2000-ref", "loongson,ls2k2000"; + model = "Loongson-2K2000 Reference Board"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@200000 { + device_type = "memory"; + reg = <0x0 0x00200000 0x0 0x0ee00000>, + <0x0 0x90000000 0x0 0x70000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x2000000>; + linux,cma-default; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&rtc0 { + status = "okay"; +}; + +&xhci0 { + status = "okay"; +}; + +&xhci1 { + status = "okay"; +}; + +&gmac0 { + status = "okay"; +}; + +&gmac1 { + status = "okay"; +}; + +&gmac2 { + status = "okay"; +}; diff --git a/arch/loongarch/boot/dts/loongson-2k2000.dtsi b/arch/loongarch/boot/dts/loongson-2k2000.dtsi new file mode 100644 index 000000000000..a231949b5f55 --- /dev/null +++ b/arch/loongarch/boot/dts/loongson-2k2000.dtsi @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +/dts-v1/; + +#include + +/ { + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@1 { + compatible = "loongson,la364"; + device_type = "cpu"; + reg = <0x0>; + clocks = <&cpu_clk>; + }; + + cpu1: cpu@2 { + compatible = "loongson,la364"; + device_type = "cpu"; + reg = <0x1>; + clocks = <&cpu_clk>; + }; + }; + + cpu_clk: cpu-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1400000000>; + }; + + cpuintc: interrupt-controller { + compatible = "loongson,cpu-interrupt-controller"; + #interrupt-cells = <1>; + interrupt-controller; + }; + + bus@10000000 { + compatible = "simple-bus"; + ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>, + <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>, + <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>, + <0xfe 0x0 0xfe 0x0 0x0 0x40000000>; + #address-cells = <2>; + #size-cells = <2>; + + pmc: power-management@100d0000 { + compatible = "loongson,ls2k2000-pmc", "loongson,ls2k0500-pmc", "syscon"; + reg = <0x0 0x100d0000 0x0 0x58>; + interrupt-parent = <&eiointc>; + interrupts = <47>; + loongson,suspend-address = <0x0 0x1c000500>; + + syscon-reboot { + compatible = "syscon-reboot"; + offset = <0x30>; + mask = <0x1>; + }; + + syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmc>; + offset = <0x14>; + mask = <0x3c00>; + value = <0x3c00>; + }; + }; + + liointc: interrupt-controller@1fe01400 { + compatible = "loongson,liointc-1.0"; + reg = <0x0 0x1fe01400 0x0 0x64>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + interrupt-names = "int0"; + loongson,parent_int_map = <0xffffffff>, /* int0 */ + <0x00000000>, /* int1 */ + <0x00000000>, /* int2 */ + <0x00000000>; /* int3 */ + }; + + eiointc: interrupt-controller@1fe01600 { + compatible = "loongson,ls2k2000-eiointc"; + reg = <0x0 0x1fe01600 0x0 0xea00>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&cpuintc>; + interrupts = <3>; + }; + + pic: interrupt-controller@10000000 { + compatible = "loongson,pch-pic-1.0"; + reg = <0x0 0x10000000 0x0 0x400>; + interrupt-controller; + #interrupt-cells = <2>; + loongson,pic-base-vec = <0>; + interrupt-parent = <&eiointc>; + }; + + msi: msi-controller@1fe01140 { + compatible = "loongson,pch-msi-1.0"; + reg = <0x0 0x1fe01140 0x0 0x8>; + msi-controller; + loongson,msi-base-vec = <64>; + loongson,msi-num-vecs = <192>; + interrupt-parent = <&eiointc>; + }; + + rtc0: rtc@100d0100 { + compatible = "loongson,ls2k2000-rtc", "loongson,ls7a-rtc"; + reg = <0x0 0x100d0100 0x0 0x100>; + interrupt-parent = <&pic>; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart0: serial@1fe001e0 { + compatible = "ns16550a"; + reg = <0x0 0x1fe001e0 0x0 0x10>; + clock-frequency = <100000000>; + interrupt-parent = <&liointc>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + no-loopback-test; + status = "disabled"; + }; + + pcie@1a000000 { + compatible = "loongson,ls2k-pci"; + reg = <0x0 0x1a000000 0x0 0x02000000>, + <0xfe 0x0 0x0 0x20000000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x0 0xff>; + ranges = <0x01000000 0x0 0x00008000 0x0 0x18400000 0x0 0x00008000>, + <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>; + + gmac0: ethernet@3,0 { + reg = <0x1800 0x0 0x0 0x0 0x0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + gmac1: ethernet@3,1 { + reg = <0x1900 0x0 0x0 0x0 0x0>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + gmac2: ethernet@3,2 { + reg = <0x1a00 0x0 0x0 0x0 0x0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + xhci0: usb@4,0 { + reg = <0x2000 0x0 0x0 0x0 0x0>; + interrupts = <48 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + xhci1: usb@19,0 { + reg = <0xc800 0x0 0x0 0x0 0x0>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + display@6,1 { + reg = <0x3100 0x0 0x0 0x0 0x0>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + hda@7,0 { + reg = <0x3800 0x0 0x0 0x0 0x0>; + interrupts = <58 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + sata: sata@8,0 { + reg = <0x4000 0x0 0x0 0x0 0x0>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + pcie@9,0 { + reg = <0x4800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 32 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@a,0 { + reg = <0x5000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 33 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@b,0 { + reg = <0x5800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 34 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@c,0 { + reg = <0x6000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 35 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@d,0 { + reg = <0x6800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 36 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@e,0 { + reg = <0x7000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 37 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@f,0 { + reg = <0x7800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 40 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@10,0 { + reg = <0x8000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 30 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + }; + }; +}; diff --git a/arch/loongarch/configs/loongson3_defconfig b/arch/loongarch/configs/loongson3_defconfig index 60e331af9839..f18c2ba871ef 100644 --- a/arch/loongarch/configs/loongson3_defconfig +++ b/arch/loongarch/configs/loongson3_defconfig @@ -6,6 +6,8 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_BPF_SYSCALL=y CONFIG_BPF_JIT=y CONFIG_PREEMPT=y +CONFIG_PREEMPT_DYNAMIC=y +CONFIG_SCHED_CORE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y @@ -19,6 +21,7 @@ CONFIG_BLK_CGROUP=y CONFIG_CFS_BANDWIDTH=y CONFIG_RT_GROUP_SCHED=y CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_RDMA=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_HUGETLB=y CONFIG_CPUSETS=y @@ -26,6 +29,7 @@ CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_PERF=y CONFIG_CGROUP_BPF=y +CONFIG_CGROUP_MISC=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y CONFIG_CHECKPOINT_RESTORE=y @@ -35,6 +39,8 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y CONFIG_PERF_EVENTS=y +CONFIG_KEXEC=y +CONFIG_CRASH_DUMP=y CONFIG_LOONGARCH=y CONFIG_64BIT=y CONFIG_MACH_LOONGSON64=y @@ -44,13 +50,11 @@ CONFIG_DMI=y CONFIG_EFI=y CONFIG_SMP=y CONFIG_HOTPLUG_CPU=y -CONFIG_NR_CPUS=64 +CONFIG_NR_CPUS=256 CONFIG_NUMA=y CONFIG_CPU_HAS_FPU=y CONFIG_CPU_HAS_LSX=y CONFIG_CPU_HAS_LASX=y -CONFIG_KEXEC=y -CONFIG_CRASH_DUMP=y CONFIG_RANDOMIZE_BASE=y CONFIG_SUSPEND=y CONFIG_HIBERNATION=y @@ -62,10 +66,6 @@ CONFIG_ACPI_IPMI=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_PCI_SLOT=y CONFIG_ACPI_HOTPLUG_MEMORY=y -CONFIG_EFI_ZBOOT=y -CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y -CONFIG_EFI_CAPSULE_LOADER=m -CONFIG_EFI_TEST=m CONFIG_VIRTUALIZATION=y CONFIG_KVM=m CONFIG_JUMP_LABEL=y @@ -74,10 +74,18 @@ CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y +CONFIG_BLK_DEV_ZONED=y CONFIG_BLK_DEV_THROTTLING=y +CONFIG_BLK_DEV_THROTTLING_LOW=y +CONFIG_BLK_WBT=y +CONFIG_BLK_CGROUP_IOLATENCY=y +CONFIG_BLK_CGROUP_FC_APPID=y +CONFIG_BLK_CGROUP_IOCOST=y +CONFIG_BLK_CGROUP_IOPRIO=y CONFIG_PARTITION_ADVANCED=y CONFIG_BSD_DISKLABEL=y CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_CMDLINE_PARTITION=y CONFIG_IOSCHED_BFQ=y CONFIG_BFQ_GROUP_IOSCHED=y CONFIG_BINFMT_MISC=m @@ -93,6 +101,8 @@ CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_CMA=y +CONFIG_CMA_SYSFS=y CONFIG_USERFAULTFD=y CONFIG_NET=y CONFIG_PACKET=y @@ -128,6 +138,7 @@ CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_ESP=m CONFIG_IPV6_MROUTE=y +CONFIG_MPTCP=y CONFIG_NETWORK_PHY_TIMESTAMPING=y CONFIG_NETFILTER=y CONFIG_BRIDGE_NETFILTER=m @@ -352,6 +363,7 @@ CONFIG_PCIEAER=y CONFIG_PCI_IOV=y CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_SHPC=y +CONFIG_PCI_HOST_GENERIC=y CONFIG_PCCARD=m CONFIG_YENTA=m CONFIG_RAPIDIO=y @@ -365,6 +377,10 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_FW_LOADER_COMPRESS=y CONFIG_FW_LOADER_COMPRESS_ZSTD=y +CONFIG_EFI_ZBOOT=y +CONFIG_EFI_BOOTLOADER_CONTROL=m +CONFIG_EFI_CAPSULE_LOADER=m +CONFIG_EFI_TEST=m CONFIG_MTD=m CONFIG_MTD_BLOCK=m CONFIG_MTD_CFI=m @@ -586,6 +602,7 @@ CONFIG_RTW89_8852AE=m CONFIG_RTW89_8852CE=m CONFIG_ZD1211RW=m CONFIG_USB_NET_RNDIS_WLAN=m +CONFIG_USB4_NET=m CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_EVDEV=y @@ -691,6 +708,9 @@ CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_HDMI=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_USB_AUDIO=m +CONFIG_SND_SOC=m +CONFIG_SND_SOC_LOONGSON_CARD=m +CONFIG_SND_VIRTIO=m CONFIG_HIDRAW=y CONFIG_UHID=m CONFIG_HID_A4TECH=m @@ -738,6 +758,11 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_EFI=y CONFIG_RTC_DRV_LOONGSON=y CONFIG_DMADEVICES=y +CONFIG_LS2X_APB_DMA=y +CONFIG_UDMABUF=y +CONFIG_DMABUF_HEAPS=y +CONFIG_DMABUF_HEAPS_SYSTEM=y +CONFIG_DMABUF_HEAPS_CMA=y CONFIG_UIO=m CONFIG_UIO_PDRV_GENIRQ=m CONFIG_UIO_DMEM_GENIRQ=m @@ -778,7 +803,15 @@ CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y CONFIG_DEVFREQ_GOV_PERFORMANCE=y CONFIG_DEVFREQ_GOV_POWERSAVE=y CONFIG_DEVFREQ_GOV_USERSPACE=y +CONFIG_NTB=m +CONFIG_NTB_MSI=y +CONFIG_NTB_IDT=m +CONFIG_NTB_EPF=m +CONFIG_NTB_SWITCHTEC=m +CONFIG_NTB_PERF=m +CONFIG_NTB_TRANSPORT=m CONFIG_PWM=y +CONFIG_USB4=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -797,6 +830,10 @@ CONFIG_GFS2_FS_LOCKING_DLM=y CONFIG_OCFS2_FS=m CONFIG_BTRFS_FS=y CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_F2FS_FS=m +CONFIG_F2FS_FS_SECURITY=y +CONFIG_F2FS_CHECK_FS=y +CONFIG_F2FS_FS_COMPRESSION=y CONFIG_FANOTIFY=y CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y CONFIG_QUOTA=y @@ -883,7 +920,6 @@ CONFIG_KEY_DH_OPERATIONS=y CONFIG_SECURITY=y CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y -CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_APPARMOR=y CONFIG_SECURITY_YAMA=y CONFIG_DEFAULT_SECURITY_DAC=y @@ -914,6 +950,9 @@ CONFIG_CRYPTO_USER_API_RNG=m CONFIG_CRYPTO_USER_API_AEAD=m CONFIG_CRYPTO_CRC32_LOONGARCH=m CONFIG_CRYPTO_DEV_VIRTIO=m +CONFIG_DMA_CMA=y +CONFIG_DMA_NUMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=0 CONFIG_PRINTK_TIME=y CONFIG_STRIP_ASM_SYMS=y CONFIG_MAGIC_SYSRQ=y diff --git a/arch/loongarch/include/asm/bootinfo.h b/arch/loongarch/include/asm/bootinfo.h index c60796869b2b..6d5846dd075c 100644 --- a/arch/loongarch/include/asm/bootinfo.h +++ b/arch/loongarch/include/asm/bootinfo.h @@ -24,13 +24,15 @@ struct loongson_board_info { const char *board_vendor; }; +#define NR_WORDS DIV_ROUND_UP(NR_CPUS, BITS_PER_LONG) + struct loongson_system_configuration { int nr_cpus; int nr_nodes; int boot_cpu_id; int cores_per_node; int cores_per_package; - unsigned long cores_io_master; + unsigned long cores_io_master[NR_WORDS]; unsigned long suspend_addr; const char *cpuname; }; @@ -42,7 +44,7 @@ extern struct loongson_system_configuration loongson_sysconf; static inline bool io_master(int cpu) { - return test_bit(cpu, &loongson_sysconf.cores_io_master); + return test_bit(cpu, loongson_sysconf.cores_io_master); } #endif /* _ASM_BOOTINFO_H */ diff --git a/arch/loongarch/include/asm/crash_core.h b/arch/loongarch/include/asm/crash_core.h new file mode 100644 index 000000000000..218bdbfa527b --- /dev/null +++ b/arch/loongarch/include/asm/crash_core.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef _LOONGARCH_CRASH_CORE_H +#define _LOONGARCH_CRASH_CORE_H + +#define CRASH_ALIGN SZ_2M + +#define CRASH_ADDR_LOW_MAX SZ_4G +#define CRASH_ADDR_HIGH_MAX memblock_end_of_DRAM() + +extern phys_addr_t memblock_end_of_DRAM(void); + +#endif diff --git a/arch/loongarch/include/asm/elf.h b/arch/loongarch/include/asm/elf.h index 9b16a3b8e706..f16bd42456e4 100644 --- a/arch/loongarch/include/asm/elf.h +++ b/arch/loongarch/include/asm/elf.h @@ -241,8 +241,6 @@ void loongarch_dump_regs64(u64 *uregs, const struct pt_regs *regs); do { \ current->thread.vdso = &vdso_info; \ \ - loongarch_set_personality_fcsr(state); \ - \ if (personality(current->personality) != PER_LINUX) \ set_personality(PER_LINUX); \ } while (0) @@ -259,7 +257,6 @@ do { \ clear_thread_flag(TIF_32BIT_ADDR); \ \ current->thread.vdso = &vdso_info; \ - loongarch_set_personality_fcsr(state); \ \ p = personality(current->personality); \ if (p != PER_LINUX32 && p != PER_LINUX) \ @@ -340,6 +337,4 @@ extern int arch_elf_pt_proc(void *ehdr, void *phdr, struct file *elf, extern int arch_check_elf(void *ehdr, bool has_interpreter, void *interp_ehdr, struct arch_elf_state *state); -extern void loongarch_set_personality_fcsr(struct arch_elf_state *state); - #endif /* _ASM_ELF_H */ diff --git a/arch/loongarch/include/asm/ftrace.h b/arch/loongarch/include/asm/ftrace.h index a11996eb5892..de891c2c83d4 100644 --- a/arch/loongarch/include/asm/ftrace.h +++ b/arch/loongarch/include/asm/ftrace.h @@ -63,7 +63,7 @@ ftrace_regs_get_instruction_pointer(struct ftrace_regs *fregs) static __always_inline void ftrace_regs_set_instruction_pointer(struct ftrace_regs *fregs, unsigned long ip) { - regs_set_return_value(&fregs->regs, ip); + instruction_pointer_set(&fregs->regs, ip); } #define ftrace_regs_get_argument(fregs, n) \ diff --git a/arch/loongarch/include/asm/shmparam.h b/arch/loongarch/include/asm/shmparam.h deleted file mode 100644 index c9554f48d2df..000000000000 --- a/arch/loongarch/include/asm/shmparam.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (C) 2020-2022 Loongson Technology Corporation Limited - */ -#ifndef _ASM_SHMPARAM_H -#define _ASM_SHMPARAM_H - -#define __ARCH_FORCE_SHMLBA 1 - -#define SHMLBA SZ_64K /* attach addr a multiple of this */ - -#endif /* _ASM_SHMPARAM_H */ diff --git a/arch/loongarch/kernel/acpi.c b/arch/loongarch/kernel/acpi.c index 8e00a754e548..b6b097bbf866 100644 --- a/arch/loongarch/kernel/acpi.c +++ b/arch/loongarch/kernel/acpi.c @@ -119,7 +119,7 @@ acpi_parse_eio_master(union acpi_subtable_headers *header, const unsigned long e return -EINVAL; core = eiointc->node * CORES_PER_EIO_NODE; - set_bit(core, &(loongson_sysconf.cores_io_master)); + set_bit(core, loongson_sysconf.cores_io_master); return 0; } diff --git a/arch/loongarch/kernel/efi.c b/arch/loongarch/kernel/efi.c index acb5d3385675..000825406c1f 100644 --- a/arch/loongarch/kernel/efi.c +++ b/arch/loongarch/kernel/efi.c @@ -140,4 +140,6 @@ void __init efi_init(void) early_memunmap(tbl, sizeof(*tbl)); } + + efi_esrt_init(); } diff --git a/arch/loongarch/kernel/elf.c b/arch/loongarch/kernel/elf.c index 183e94fc9c69..0fa81ced28dc 100644 --- a/arch/loongarch/kernel/elf.c +++ b/arch/loongarch/kernel/elf.c @@ -23,8 +23,3 @@ int arch_check_elf(void *_ehdr, bool has_interpreter, void *_interp_ehdr, { return 0; } - -void loongarch_set_personality_fcsr(struct arch_elf_state *state) -{ - current->thread.fpu.fcsr = boot_cpu_data.fpu_csr0; -} diff --git a/arch/loongarch/kernel/env.c b/arch/loongarch/kernel/env.c index 6b3bfb0092e6..2f1f5b08638f 100644 --- a/arch/loongarch/kernel/env.c +++ b/arch/loongarch/kernel/env.c @@ -5,13 +5,16 @@ * Copyright (C) 2020-2022 Loongson Technology Corporation Limited */ #include +#include #include #include #include +#include #include #include #include #include +#include u64 efi_system_table; struct loongson_system_configuration loongson_sysconf; @@ -36,7 +39,16 @@ void __init init_environ(void) static int __init init_cpu_fullname(void) { - int cpu; + struct device_node *root; + int cpu, ret; + char *model; + + /* Parsing cpuname from DTS model property */ + root = of_find_node_by_path("/"); + ret = of_property_read_string(root, "model", (const char **)&model); + of_node_put(root); + if (ret == 0) + loongson_sysconf.cpuname = strsep(&model, " "); if (loongson_sysconf.cpuname && !strncmp(loongson_sysconf.cpuname, "Loongson", 8)) { for (cpu = 0; cpu < NR_CPUS; cpu++) @@ -46,6 +58,26 @@ static int __init init_cpu_fullname(void) } arch_initcall(init_cpu_fullname); +static int __init fdt_cpu_clk_init(void) +{ + struct clk *clk; + struct device_node *np; + + np = of_get_cpu_node(0, NULL); + if (!np) + return -ENODEV; + + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) + return -ENODEV; + + cpu_clock_freq = clk_get_rate(clk); + clk_put(clk); + + return 0; +} +late_initcall(fdt_cpu_clk_init); + static ssize_t boardinfo_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) { diff --git a/arch/loongarch/kernel/head.S b/arch/loongarch/kernel/head.S index 0ecab4216392..c4f7de2e2805 100644 --- a/arch/loongarch/kernel/head.S +++ b/arch/loongarch/kernel/head.S @@ -74,6 +74,11 @@ SYM_CODE_START(kernel_entry) # kernel entry point la.pcrel t0, fw_arg2 st.d a2, t0, 0 +#ifdef CONFIG_PAGE_SIZE_4KB + li.d t0, 0 + li.d t1, CSR_STFILL + csrxchg t0, t1, LOONGARCH_CSR_IMPCTL1 +#endif /* KSave3 used for percpu base, initialized as 0 */ csrwr zero, PERCPU_BASE_KS /* GPR21 used for percpu base (runtime), initialized as 0 */ @@ -126,6 +131,11 @@ SYM_CODE_START(smpboot_entry) JUMP_VIRT_ADDR t0, t1 +#ifdef CONFIG_PAGE_SIZE_4KB + li.d t0, 0 + li.d t1, CSR_STFILL + csrxchg t0, t1, LOONGARCH_CSR_IMPCTL1 +#endif /* Enable PG */ li.w t0, 0xb0 # PLV=0, IE=0, PG=1 csrwr t0, LOONGARCH_CSR_CRMD diff --git a/arch/loongarch/kernel/process.c b/arch/loongarch/kernel/process.c index 767d94cce0de..f2ff8b5d591e 100644 --- a/arch/loongarch/kernel/process.c +++ b/arch/loongarch/kernel/process.c @@ -85,6 +85,7 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp) regs->csr_euen = euen; lose_fpu(0); lose_lbt(0); + current->thread.fpu.fcsr = boot_cpu_data.fpu_csr0; clear_thread_flag(TIF_LSX_CTX_LIVE); clear_thread_flag(TIF_LASX_CTX_LIVE); diff --git a/arch/loongarch/kernel/setup.c b/arch/loongarch/kernel/setup.c index d183a745fb85..edf2bba80130 100644 --- a/arch/loongarch/kernel/setup.c +++ b/arch/loongarch/kernel/setup.c @@ -252,38 +252,23 @@ static void __init arch_reserve_vmcore(void) #endif } -/* 2MB alignment for crash kernel regions */ -#define CRASH_ALIGN SZ_2M -#define CRASH_ADDR_MAX SZ_4G - -static void __init arch_parse_crashkernel(void) +static void __init arch_reserve_crashkernel(void) { -#ifdef CONFIG_KEXEC int ret; - unsigned long long total_mem; + unsigned long long low_size = 0; unsigned long long crash_base, crash_size; + char *cmdline = boot_command_line; + bool high = false; - total_mem = memblock_phys_mem_size(); - ret = parse_crashkernel(boot_command_line, total_mem, - &crash_size, &crash_base, - NULL, NULL); - if (ret < 0 || crash_size <= 0) + if (!IS_ENABLED(CONFIG_KEXEC_CORE)) return; - if (crash_base <= 0) { - crash_base = memblock_phys_alloc_range(crash_size, CRASH_ALIGN, CRASH_ALIGN, CRASH_ADDR_MAX); - if (!crash_base) { - pr_warn("crashkernel reservation failed - No suitable area found.\n"); - return; - } - } else if (!memblock_phys_alloc_range(crash_size, CRASH_ALIGN, crash_base, crash_base + crash_size)) { - pr_warn("Invalid memory region reserved for crash kernel\n"); + ret = parse_crashkernel(cmdline, memblock_phys_mem_size(), + &crash_size, &crash_base, &low_size, &high); + if (ret) return; - } - crashk_res.start = crash_base; - crashk_res.end = crash_base + crash_size - 1; -#endif + reserve_crashkernel_generic(cmdline, crash_size, crash_base, low_size, high); } static void __init fdt_setup(void) @@ -295,8 +280,12 @@ static void __init fdt_setup(void) if (acpi_os_get_root_pointer()) return; - /* Look for a device tree configuration table entry */ - fdt_pointer = efi_fdt_pointer(); + /* Prefer to use built-in dtb, checking its legality first. */ + if (!fdt_check_header(__dtb_start)) + fdt_pointer = __dtb_start; + else + fdt_pointer = efi_fdt_pointer(); /* Fallback to firmware dtb */ + if (!fdt_pointer || fdt_check_header(fdt_pointer)) return; @@ -330,7 +319,9 @@ static void __init bootcmdline_init(char **cmdline_p) if (boot_command_line[0]) strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); - strlcat(boot_command_line, init_command_line, COMMAND_LINE_SIZE); + if (!strstr(boot_command_line, init_command_line)) + strlcat(boot_command_line, init_command_line, COMMAND_LINE_SIZE); + goto out; } #endif @@ -357,7 +348,7 @@ static void __init bootcmdline_init(char **cmdline_p) void __init platform_init(void) { arch_reserve_vmcore(); - arch_parse_crashkernel(); + arch_reserve_crashkernel(); #ifdef CONFIG_ACPI_TABLE_UPGRADE acpi_table_upgrade(); @@ -467,15 +458,6 @@ static void __init resource_init(void) request_resource(res, &data_resource); request_resource(res, &bss_resource); } - -#ifdef CONFIG_KEXEC - if (crashk_res.start < crashk_res.end) { - insert_resource(&iomem_resource, &crashk_res); - pr_info("Reserving %ldMB of memory at %ldMB for crashkernel\n", - (unsigned long)((crashk_res.end - crashk_res.start + 1) >> 20), - (unsigned long)(crashk_res.start >> 20)); - } -#endif } static int __init add_legacy_isa_io(struct fwnode_handle *fwnode, diff --git a/arch/loongarch/kernel/smp.c b/arch/loongarch/kernel/smp.c index 5bca12d16e06..a16e3dbe9f09 100644 --- a/arch/loongarch/kernel/smp.c +++ b/arch/loongarch/kernel/smp.c @@ -208,7 +208,7 @@ static void __init fdt_smp_setup(void) } loongson_sysconf.nr_cpus = num_processors; - set_bit(0, &(loongson_sysconf.cores_io_master)); + set_bit(0, loongson_sysconf.cores_io_master); #endif } @@ -216,6 +216,9 @@ void __init loongson_smp_setup(void) { fdt_smp_setup(); + if (loongson_sysconf.cores_per_package == 0) + loongson_sysconf.cores_per_package = num_processors; + cpu_data[0].core = cpu_logical_map(0) % loongson_sysconf.cores_per_package; cpu_data[0].package = cpu_logical_map(0) / loongson_sysconf.cores_per_package; diff --git a/arch/loongarch/net/bpf_jit.c b/arch/loongarch/net/bpf_jit.c index 4fcd6cd6da23..e73323d759d0 100644 --- a/arch/loongarch/net/bpf_jit.c +++ b/arch/loongarch/net/bpf_jit.c @@ -201,6 +201,11 @@ bool bpf_jit_supports_kfunc_call(void) return true; } +bool bpf_jit_supports_far_kfunc_call(void) +{ + return true; +} + /* initialized on the first pass of build_body() */ static int out_offset = -1; static int emit_bpf_tail_call(struct jit_ctx *ctx) @@ -465,7 +470,6 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext const u8 dst = regmap[insn->dst_reg]; const s16 off = insn->off; const s32 imm = insn->imm; - const u64 imm64 = (u64)(insn + 1)->imm << 32 | (u32)insn->imm; const bool is32 = BPF_CLASS(insn->code) == BPF_ALU || BPF_CLASS(insn->code) == BPF_JMP32; switch (code) { @@ -923,8 +927,12 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext /* dst = imm64 */ case BPF_LD | BPF_IMM | BPF_DW: + { + const u64 imm64 = (u64)(insn + 1)->imm << 32 | (u32)insn->imm; + move_imm(ctx, dst, imm64, is32); return 1; + } /* dst = *(size *)(src + off) */ case BPF_LDX | BPF_MEM | BPF_B: diff --git a/scripts/generate_rust_target.rs b/scripts/generate_rust_target.rs index 3c6cbe2b278d..0da52b548ba5 100644 --- a/scripts/generate_rust_target.rs +++ b/scripts/generate_rust_target.rs @@ -161,6 +161,13 @@ fn main() { ts.push("features", features); ts.push("llvm-target", "x86_64-linux-gnu"); ts.push("target-pointer-width", "64"); + } else if cfg.has("LOONGARCH") { + ts.push("arch", "loongarch64"); + ts.push("data-layout", "e-m:e-p:64:64-i64:64-i128:128-n64-S128"); + ts.push("features", "-f,-d"); + ts.push("llvm-target", "loongarch64-linux-gnusf"); + ts.push("llvm-abiname", "lp64s"); + ts.push("target-pointer-width", "64"); } else { panic!("Unsupported architecture"); } diff --git a/scripts/min-tool-version.sh b/scripts/min-tool-version.sh index c62066825f53..9faa4d3d91e3 100755 --- a/scripts/min-tool-version.sh +++ b/scripts/min-tool-version.sh @@ -26,6 +26,8 @@ gcc) llvm) if [ "$SRCARCH" = s390 ]; then echo 15.0.0 + elif [ "$SRCARCH" = loongarch ]; then + echo 18.0.0 else echo 11.0.0 fi diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index e2bc180cecc8..795b21154446 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -1345,6 +1345,14 @@ static Elf_Addr addend_mips_rel(uint32_t *location, unsigned int r_type) #define R_LARCH_SUB32 55 #endif +#ifndef R_LARCH_RELAX +#define R_LARCH_RELAX 100 +#endif + +#ifndef R_LARCH_ALIGN +#define R_LARCH_ALIGN 102 +#endif + static void get_rel_type_and_sym(struct elf_info *elf, uint64_t r_info, unsigned int *r_type, unsigned int *r_sym) { @@ -1399,9 +1407,16 @@ static void section_rela(struct module *mod, struct elf_info *elf, continue; break; case EM_LOONGARCH: - if (!strcmp("__ex_table", fromsec) && - r_type == R_LARCH_SUB32) + switch (r_type) { + case R_LARCH_SUB32: + if (!strcmp("__ex_table", fromsec)) + continue; + break; + case R_LARCH_RELAX: + case R_LARCH_ALIGN: + /* These relocs do not refer to symbols */ continue; + } break; }