ARM: SoC fixes for 3.11-rc

A handful of fixes for 3.11 are still trickling in. These are:
 - A couple of fixes for older OMAP platforms
 - Another few fixes for at91 (lateish due to European summer vacations)
 - A late-found problem with USB on Tegra, fix is to keep VBUS regulator
   on at all times
 - One fix for Exynos 5440 dealing with CPU detection
 - One MAINTAINERS update
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSFbbrAAoJEIwa5zzehBx3J3EP/3iaagsR0S9Ya8V+11tquVMQ
 5S6xF7BQddJRiM1wVwkApDXHCVEiNfKs2AAh6aFQTZhHF+2hXFY80afFSCon52tx
 same+gTJw5qsuxrDfFTfBwuyv/cAqGnfAx+EV8nHDPk3vcC62xfLbLemvBWFu+sz
 jXwhmbGmqxOffHiAAaXEbz01YYq1BQeRvm9dTXStJGmcyUomG+73DV8CSs2gKUEU
 vC7MRj1yYDRtuwkEKdHN3IDfyWpwzgYi5iS1nL1OI0MP+6Jt2dLa+j7uALXKV+f/
 R3KOkJRXBQ1W+kCd0DbiyORd9sGOM1rzHPYQF0XqtgdoYGzcQ/2B53OlFaoPBkvs
 Y+Z+B3OZZChLeZRy520x5hi5NkdVq3kcH377rND+w01ss4KFfttjb9Y0rpJ6kqaG
 L61ElFF6TGiU5WVU079gR+zVGNKhG4hZrtPvkyfHA9wN7KX5lin0BUuvX7hmFu3o
 bcF5TkcT30hIGSsvwa+DAsAsyirehuClu3QK0Val9OpZJ01Z8h/amFAjVXz/Y6N9
 xQokQ1LsttwBG/rkniahEy00Vda2sE9PXlPzopHclytq5JyiUs6zdR7nUHhyTXIM
 xpvnxV1CrGZGoNr3J9yzdKiGuw6q7kbjsOR7vwY9nH+BniFpG8YDm418UrhsN3cp
 IRo0ZDIIXlcZCyKrRl5F
 =NVob
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A handful of fixes for 3.11 are still trickling in.  These are:
   - A couple of fixes for older OMAP platforms
   - Another few fixes for at91 (lateish due to European summer
     vacations)
   - A late-found problem with USB on Tegra, fix is to keep VBUS
     regulator on at all times
   - One fix for Exynos 5440 dealing with CPU detection
   - One MAINTAINERS update"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: tegra: always enable USB VBUS regulators
  ARM: davinci: nand: specify ecc strength
  ARM: OMAP: rx51: change musb mode to OTG
  ARM: OMAP2: fix musb usage for n8x0
  MAINTAINERS: Update email address for Benoit Cousson
  ARM: at91/DT: fix at91sam9n12ek memory node
  ARM: at91: add missing uart clocks DT entries
  ARM: SAMSUNG: fix to support for missing cpu specific map_io
  ARM: at91/DT: at91sam9x5ek: fix USB host property to enable port C
This commit is contained in:
Linus Torvalds 2013-08-22 10:44:44 -07:00
commit 1f8b76656b
15 changed files with 27 additions and 18 deletions

View file

@ -5884,7 +5884,7 @@ F: drivers/i2c/busses/i2c-omap.c
F: include/linux/i2c-omap.h
OMAP DEVICE TREE SUPPORT
M: Benoît Cousson <b-cousson@ti.com>
M: Benoît Cousson <bcousson@baylibre.com>
M: Tony Lindgren <tony@atomide.com>
L: linux-omap@vger.kernel.org
L: devicetree@vger.kernel.org
@ -5964,14 +5964,14 @@ S: Maintained
F: drivers/char/hw_random/omap-rng.c
OMAP HWMOD SUPPORT
M: Benoît Cousson <b-cousson@ti.com>
M: Benoît Cousson <bcousson@baylibre.com>
M: Paul Walmsley <paul@pwsan.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/mach-omap2/omap_hwmod.*
OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
M: Benoît Cousson <b-cousson@ti.com>
M: Benoît Cousson <bcousson@baylibre.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/mach-omap2/omap_hwmod_44xx_data.c

View file

@ -14,11 +14,11 @@
compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
chosen {
bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
};
memory {
reg = <0x20000000 0x10000000>;
reg = <0x20000000 0x8000000>;
};
clocks {

View file

@ -94,8 +94,9 @@
usb0: ohci@00600000 {
status = "okay";
num-ports = <2>;
atmel,vbus-gpio = <&pioD 19 GPIO_ACTIVE_LOW
num-ports = <3>;
atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
&pioD 19 GPIO_ACTIVE_LOW
&pioD 20 GPIO_ACTIVE_LOW
>;
};

View file

@ -830,6 +830,8 @@
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio 24 0>; /* PD0 */
regulator-always-on;
regulator-boot-on;
};
};

View file

@ -412,6 +412,8 @@
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio 170 0>; /* PV2 */
regulator-always-on;
regulator-boot-on;
};
};

View file

@ -588,6 +588,8 @@
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
regulator-always-on;
regulator-boot-on;
};
vbus3_reg: regulator@3 {
@ -598,6 +600,8 @@
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
regulator-always-on;
regulator-boot-on;
};
};

View file

@ -227,6 +227,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk),
CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
CLKDEV_CON_DEV_ID("usart", "f8040000.serial", &uart0_clk),
CLKDEV_CON_DEV_ID("usart", "f8044000.serial", &uart1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk),
CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc0_clk),

View file

@ -75,6 +75,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW_SYNDROME,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
};

View file

@ -153,6 +153,7 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = {
.parts = davinci_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
.ecc_bits = 1,
.bbt_options = NAND_BBT_USE_FLASH,
.timing = &davinci_evm_nandflash_timing,
};

View file

@ -90,6 +90,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW,
.ecc_bits = 1,
.options = 0,
};

View file

@ -88,6 +88,7 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
.parts = davinci_ntosd2_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
.ecc_bits = 1,
.bbt_options = NAND_BBT_USE_FLASH,
};

View file

@ -122,11 +122,7 @@ static struct musb_hdrc_config musb_config = {
};
static struct musb_hdrc_platform_data tusb_data = {
#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
#else
.mode = MUSB_HOST,
#endif
.set_power = tusb_set_power,
.min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */
.power = 100, /* Max 100 mA VBUS for host mode */

View file

@ -85,7 +85,7 @@ static struct omap_board_mux board_mux[] __initdata = {
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_ULPI,
.mode = MUSB_PERIPHERAL,
.mode = MUSB_OTG,
.power = 0,
};

View file

@ -38,11 +38,8 @@ static struct musb_hdrc_config musb_config = {
};
static struct musb_hdrc_platform_data musb_plat = {
#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
#else
.mode = MUSB_HOST,
#endif
/* .clock is set dynamically */
.config = &musb_config,

View file

@ -55,12 +55,13 @@ void __init s3c_init_cpu(unsigned long idcode,
printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
if (cpu->map_io == NULL || cpu->init == NULL) {
if (cpu->init == NULL) {
printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
panic("Unsupported Samsung CPU");
}
cpu->map_io();
if (cpu->map_io)
cpu->map_io();
}
/* s3c24xx_init_clocks